Return to httpd.conf CVS log

Up to [LON-CAPA] / doc / install / suse / sles9 / i386

Change default e-mail address for admin.

Eliminate some unwanted aliases.

Directive for /home/httpd/cgi-bin provided in loncapa_apache.conf

##
## httpd.conf -- Apache HTTP server configuration file
##

#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# After this file is processed, the server will look for and process
# /etc/httpd/srm.conf and then /etc/httpd/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerType is either inetd, or standalone.  Inetd mode is only supported on
# Unix platforms.
#
ServerType standalone

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
#
ServerRoot "/etc/httpd"

#
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename. 
#
LockFile /var/lock/subsys/httpd/httpd.accept.lock

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile /var/run/httpd.pid

#
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this.  But if yours does (you'll know because
# this file will be  created when you run Apache) then you *must* ensure that
# no two invocations of Apache share the same scoreboard file.
#
ScoreBoardFile /var/run/httpd.scoreboard

#
# In the standard configuration, the server will process httpd.conf (this 
# file, specified by the -f command line option), srm.conf, and access.conf 
# in that order.  The latter two files are now distributed empty, as it is 
# recommended that all directives be kept in a single file for simplicity.  
# The commented-out values below are the built-in defaults.  You can have the 
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#
#ResourceConfig /etc/httpd/srm.conf
#AccessConfig /etc/httpd/access.conf

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

#
# Server-pool size regulation.  Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
#
# It does this by periodically checking how many servers are waiting
# for a request.  If there are fewer than MinSpareServers, it creates
# a new spare.  If there are more than MaxSpareServers, some of the
# spares die off.  The default values are probably OK for most sites.
#

# Note: these two values are set by SuSEconfig according to the setting of the
# HTTPD_PERFORMANCE variable in /etc/sysconfig/apache! 
MinSpareServers 1
MaxSpareServers 1

#
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
#

# Note: this value is set by SuSEconfig according to the setting of the
# HTTPD_PERFORMANCE variable in /etc/sysconfig/apache! 
StartServers 1

#
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#

# Note: this value is set by SuSEconfig according to the setting of the
# HTTPD_PERFORMANCE variable in /etc/sysconfig/apache! 
MaxClients 150

#
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies.  The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources.  On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
#
# NOTE: This value does not include keepalive requests after the initial
#       request per connection. For example, if a child process handles
#       an initial request and 10 subsequent "keptalive" requests, it
#       would only count as 1 request towards this limit.
#
MaxRequestsPerChild 0

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
#Listen 3000
#Listen 12.34.56.78:80

#
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#
#BindAddress *

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Please read the file http://httpd.apache.org/docs/dso.html for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
#
# Note: The order in which modules are loaded is important.  Don't change
# the order below without expert advice.

# Note:
#
# The file that is included after the LoadModule statements is generated 
# by SuSEconfig according to 
#
# 1) which modules (ones not included with apache) are installed
# 2) the settings in /etc/sysconfig/apache
# 
# SuSEconfig uses the /etc/httpd/modules/* files that come with each module 
# to determine the necessary directives. 
# 
# Apache no longer needs to be started with '-D <modules>' switches (with 
# the exception of mod_ssl, which has a lot of conditional statements).

# Example:
# LoadModule foo_module libexec/mod_foo.so
LoadModule mmap_static_module /usr/lib/apache/mod_mmap_static.so
LoadModule vhost_alias_module /usr/lib/apache/mod_vhost_alias.so
LoadModule env_module         /usr/lib/apache/mod_env.so
LoadModule define_module      /usr/lib/apache/mod_define.so
LoadModule config_log_module  /usr/lib/apache/mod_log_config.so
LoadModule agent_log_module   /usr/lib/apache/mod_log_agent.so
LoadModule referer_log_module /usr/lib/apache/mod_log_referer.so
LoadModule mime_magic_module  /usr/lib/apache/mod_mime_magic.so
LoadModule mime_module        /usr/lib/apache/mod_mime.so
LoadModule negotiation_module /usr/lib/apache/mod_negotiation.so
LoadModule status_module      /usr/lib/apache/mod_status.so
LoadModule info_module        /usr/lib/apache/mod_info.so
LoadModule includes_module    /usr/lib/apache/mod_include.so
LoadModule autoindex_module   /usr/lib/apache/mod_autoindex.so
LoadModule dir_module         /usr/lib/apache/mod_dir.so
LoadModule cgi_module         /usr/lib/apache/mod_cgi.so
LoadModule asis_module        /usr/lib/apache/mod_asis.so
LoadModule imap_module        /usr/lib/apache/mod_imap.so
LoadModule action_module      /usr/lib/apache/mod_actions.so
LoadModule speling_module     /usr/lib/apache/mod_speling.so
# mod_userdir will be included below by SuSEconfig if HTTPD_SEC_PUBLIC_HTML=yes
LoadModule alias_module       /usr/lib/apache/mod_alias.so
LoadModule rewrite_module     /usr/lib/apache/mod_rewrite.so
LoadModule access_module      /usr/lib/apache/mod_access.so
LoadModule auth_module        /usr/lib/apache/mod_auth.so
LoadModule anon_auth_module   /usr/lib/apache/mod_auth_anon.so
LoadModule dbm_auth_module    /usr/lib/apache/mod_auth_dbm.so
LoadModule db_auth_module     /usr/lib/apache/mod_auth_db.so
LoadModule digest_module      /usr/lib/apache/mod_digest.so
LoadModule proxy_module       /usr/lib/apache/libproxy.so
LoadModule cern_meta_module   /usr/lib/apache/mod_cern_meta.so
LoadModule expires_module     /usr/lib/apache/mod_expires.so
LoadModule headers_module     /usr/lib/apache/mod_headers.so
LoadModule usertrack_module   /usr/lib/apache/mod_usertrack.so
# LoadModule unique_id_module   /usr/lib/apache/mod_unique_id.so
LoadModule setenvif_module    /usr/lib/apache/mod_setenvif.so
<IfDefine DUMMYSSL>
LoadModule ssl_module         /usr/lib/apache/libssl.so
</IfDefine>

Include /etc/httpd/suse_loadmodule.conf


#  Reconstruction of the complete module list from all available modules
#  (static and shared ones) to achieve correct module execution order.
#  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
AddModule mod_mmap_static.c
AddModule mod_vhost_alias.c
AddModule mod_env.c
AddModule mod_define.c
AddModule mod_log_config.c
AddModule mod_log_agent.c
AddModule mod_log_referer.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_speling.c
# mod_userdir will be included below by SuSEconfig if HTTPD_SEC_PUBLIC_HTML=yes
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_auth_db.c
AddModule mod_digest.c
AddModule mod_proxy.c
AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_usertrack.c
# AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
<IfDefine DUMMYSSL>
AddModule mod_ssl.c
</IfDefine>



# Again, the following file is generated by SuSEconfig for modules that actually
# have been installed

Include /etc/httpd/suse_addmodule.conf


#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
ExtendedStatus On


#
# To enable mod_dav, add the following directive to the appropriate
# container(s) in the httpd.conf file:
#
<IfModule mod_dav.c>
DavLockDB /var/lib/httpd/DAVLock
</IfModule>



### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
#

#
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
#
Port 80

##
##  SSL Support
##
##  When we also provide SSL we have to listen to the 
##  standard HTTP port (see above) and to the HTTPS port
##
<IfDefine SSL>
Listen 80
Listen 443
</IfDefine>

#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
#  . On HPUX you may not be able to use shared memory as nobody, and the
#    suggested workaround is to create a user www and use that user.
#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
#  when the value of (unsigned)Group is above 60000; 
#  don't use Group "#-1" on these systems!
#
User www
Group www

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.
#

# Note: this email address is set by SuSEconfig according to the setting of the
# HTTPD_SEC_SERVERADMIN variable in /etc/sysconfig/apache! 
ServerAdmin root@localhost 

#
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name you 
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
#
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your 
# machine always knows itself by this address. If you use Apache strictly for 
# local testing and development, you may use 127.0.0.1 as the server name.
#

# Note: the host name is set by SuSEconfig according to the setting of the
# FQHOSTNAME variable in /etc/sysconfig/network/config!

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/home/httpd/html"

#
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# permissions.  
#
<Directory />
    AuthUserFile  /etc/httpd/passwd
    AuthGroupFile /etc/httpd/group

    Options -FollowSymLinks +Multiviews
    AllowOverride None

</Directory>


#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/srv/www/htdocs">

#
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
    Options Indexes -FollowSymLinks +Includes MultiViews

#
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo", 
# "AuthConfig", and "Limit"
#
    AllowOverride None

#
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all


	#
	# disable WebDAV by default for security reasons. 
	# 
	<IfModule mod_dav.c>
	DAV Off
	</IfModule>

#
# Protect the php3 test page, so it cannot be viewed from an outside system. 
#
<Files test.php3>
	Order deny,allow
	deny from all
	allow from localhost
</Files>

</Directory>

#
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.

# Note: 
# The next three lines are commented out here. These directives and the access 
# control section have been put into /etc/httpd/suse_public_html.conf. 
# If the variable HTTPD_SEC_PUBLIC_HTML in /etc/sysconfig/apache 
# is set to "yes" (default), SuSEconfig will include that file via 
# /etc/httpd/suse_include.conf. 
# Also note that for the /home/*/public_html directories to be browsable the 
# executable flag must be set on the /home/* directories. 

#
# <IfModule mod_userdir.c>
#     UserDir public_html
# </IfModule>

#
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS PROPFIND>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>

#
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index.  Separate multiple entries with spaces.
#
<IfModule mod_dir.c>
    DirectoryIndex index.html
</IfModule>

#
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess files from being viewed by
# Web clients.  Since .htaccess files often contain authorization
# information, access is disallowed for security reasons.  Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files.  If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</Files>

#
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs

#
# UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name.  With this setting off, Apache will
# use the hostname:port that the client supplied, when possible.  This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName On

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
<IfModule mod_mime.c>
    TypesConfig /etc/httpd/mime.types
</IfModule>

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
    MIMEMagicFile /etc/httpd/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off


#  The following are the directives necessary to get mod_backhand operational.
#  You will need to add Backhand directives to any directories that you wish
#  to balance..  For example, you could put the following inside a
#  ScriptAliased /cgi-cpu/ directory (for scripts that are cpu hogs)

# <Directory ...>
# ... stuff ...
# Backhand byAge
# Backhand byRandom
# Backhand byLogWindow
# Backhand byCPU
# ... stuff ...
# </Directory>

# This will eliminate servers you haven't heard from for a while
# Then randomize those remaining
# Then take the first log(n)  (log base 2 of course)
# Then use the one with the highest CPU idle time

<IfModule mod_backhand.c>
# UnixSocketDir is were the mod_backhand-Arriba file is stored
#   (how fast your machine is). This directory must be readable and writable
#   by euid of apache (wwwrun) because the children have dropped privileges
#   before they connect to a UNIX domain socket in this directory.
# This directive is singular.
#
# MulticastStats of the form [<IP ADDR>] <BROADCAST ADDR>:<PORT> will set
#   mod_backhand to broadcast server statistics on that address advertising
#   for a server on <IP ADDR> or gethostbyname(gethostname())
# MulticastStats of the form [<IP ADDR>] <MULTICAST ADDR>:<PORT>,<ttl> will
#   set mod_backhand to multicast server statistics on that address
#   advertising for a server on <IP ADDR> or gethostbyname(gethostname())
# This directive is singular.
#
# AcceptStats <a.b.c.d>[/<mask>] (like 10.0.0.4 or 10.0.0.0/24) will accept
#   statistics originating from that IP or IP network.
# This option can be cascaded.

  UnixSocketDir /var/lib/backhand
# MulticastStats 128.220.221.255:4445
# MulticastStats 225.220.221.20:4445,1
# AcceptStats 128.220.221.0/24

# Note that you _must_ configure the MulticastStats/AcceptStats directives, 
# otherwise apache will segfault!

# This is a status of sorts.  Visit it and see how valuable it is to you.
  <Location "/backhand/">
    SetHandler backhand-handler
  </Location>
</IfModule>


#
# working directory of mod_bandwidth
#
<IfModule mod_bandwidth.c>
    BandWidthDataDir /var/lib/httpd/mod_bandwidth
</IfModule>


#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/httpd/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog /var/log/httpd/access_log common

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog /var/log/httpd/referer_log referer
#CustomLog /var/log/httpd/agent_log agent

#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog /var/log/httpd/access_log combined

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#

# Note: this is set by SuSEconfig according to the setting of the
# HTTPD_SEC_SAY_FULLNAME variable in /etc/sysconfig/apache! 
ServerSignature Off


# EBCDIC configuration:
# (only for mainframes using the EBCDIC codeset, currently one of:
# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
# The following default configuration assumes that "text files"
# are stored in EBCDIC (so that you can operate on them using the
# normal POSIX tools like grep and sort) while "binary files" are
# stored with identical octets as on an ASCII machine.
#
# The directives are evaluated in configuration file order, with
# the EBCDICConvert directives applied before EBCDICConvertByType.
#
# If you want to have ASCII HTML documents and EBCDIC HTML documents
# at the same time, you can use the file extension to force
# conversion off for the ASCII documents:
# > AddType       text/html .ahtml
# > EBCDICConvert Off=InOut .ahtml
#
# EBCDICConvertByType  On=InOut text/* message/* multipart/*
# EBCDICConvertByType  On=In    application/x-www-form-urlencoded
# EBCDICConvertByType  On=InOut application/postscript model/vrml
# EBCDICConvertByType Off=InOut */*


#
# Aliases: Add here as many aliases as you need (with no limit). The format is 
# Alias fakename realname
#
<IfModule mod_alias.c>

    #
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL.  So "/icons" isn't aliased in this
    # example, only "/icons/".  If the fakename is slash-terminated, then the 
    # realname must also be slash terminated, and if the fakename omits the 
    # trailing slash, the realname must also omit it.
    #
    Alias /icons/ "/srv/www/icons/"

    <Directory "/srv/www/icons">
        Options Indexes MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>

    # This Alias will project the on-line documentation tree under /manual/
    # even if you change the DocumentRoot. Comment it if you don't want to 
    # provide access to the on-line documentation.
    #
    Alias /manual/ "/srv/www/htdocs/manual/"

    <Directory "/srv/www/htdocs/manual">
        Options Indexes FollowSymlinks MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    #
#    ScriptAlias /cgi-bin/ "/home/httpd/cgi-bin/"

<IfModule mod_perl.c>
    # Provide two aliases to the same cgi-bin directory, 
    # to see the effects of the 2 different mod_perl modes.
    # for Apache::Registry Mode
#    ScriptAlias /perl/          "/srv/www/cgi-bin/"
    # for Apache::Perlrun Mode
#    ScriptAlias /cgi-perl/      "/srv/www/cgi-bin/"
</IfModule>
    #
    # "/srv/www/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    #
#    <Directory "/srv/www/cgi-bin">
#        AllowOverride None
#        Options None
#        Order allow,deny
#        Allow from all
#    </Directory>

</IfModule>
# End of aliases.


#
# set /cgi-bin for CGI execution
#
#<Location /cgi-bin>
#AllowOverride None
#Options +ExecCGI -Includes
#SetHandler cgi-script
#</Location>

#
# If mod_perl is activated, load configuration information
#
<IfModule mod_perl.c>
#Perlrequire /usr/include/apache/modules/perl/startup.perl
PerlModule Apache::Registry

#
# set Apache::Registry Mode for /perl Alias
#
#<Location /perl>
#SetHandler  perl-script
#PerlHandler Apache::Registry
#Options ExecCGI
#PerlSendHeader On
#</Location>

#
# set Apache::PerlRun Mode for /cgi-perl Alias
#
#<Location /cgi-perl>
#SetHandler  perl-script
#PerlHandler Apache::PerlRun
#Options ExecCGI
#PerlSendHeader On
#</Location>

</IfModule>



#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#

#
# Directives controlling the display of server-generated directory listings.
#
<IfModule mod_autoindex.c>

    #
    # FancyIndexing is whether you want fancy directory indexing or standard
    #
    IndexOptions FancyIndexing

    #
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions.  These are only displayed for
    # FancyIndexed directories.
    #
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*

    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core

    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^

    #
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    #
    DefaultIcon /icons/unknown.gif

    #
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes.  These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #
    AddDescription "GZIP compressed document" .gz
    AddDescription "tar archive" .tar
    AddDescription "GZIP compressed tar archive" .tgz

    #
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    #
    # HeaderName is the name of a file which should be prepended to
    # directory indexes. 
    #
    ReadmeName README
    HeaderName HEADER

    #
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing.  Shell-style wildcarding is permitted.
    #
    IndexIgnore .??* *~ *#   RCS CVS *,v *,t

</IfModule>
# End of indexing directives.

#
# Document types.
#
<IfModule mod_mime.c>

    #
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.  
    #
    # Note 1: The suffix does not have to be the same as the language 
    # keyword --- those with documents in Polish (whose net-standard 
    # language code is pl) may wish to use "AddLanguage pl .po" to 
    # avoid the ambiguity with the common suffix for perl scripts.
    #
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbreviation is not
    # identical to the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    #
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char 
    # specifier. But there is 'work in progress' to fix this and get 
    # the reference data for rfc1766 cleaned up.
    #
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    #
    AddLanguage da .dk
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage he .he
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage es .es
    AddLanguage sv .sv
    AddLanguage cs .cz .cs
    AddLanguage ru .ru
    AddLanguage zh-TW .zh-tw
    AddCharset Big5         .Big5    .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866        .cp866
    AddCharset ISO-8859-5   .iso-ru
    AddCharset KOI8-R       .koi8-r
    AddCharset UCS-2        .ucs2
    AddCharset UCS-4        .ucs4
    AddCharset UTF-8        .utf8

    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    #
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    #
    <IfModule mod_negotiation.c>
        LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
    </IfModule>

    #
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    #
    AddType application/x-tar .tgz

    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    #
    AddEncoding x-compress .Z
    AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    #AddType application/x-compress .Z
    #AddType application/x-gzip .gz .tgz

    # Some more types:

    #
    # PHP 3.x:
    #
    <IfModule mod_php3.c>
    AddType application/x-httpd-php3 .php3
    AddType application/x-httpd-php3-source .phps
    AddType application/x-httpd-php3 .phtml
    </IfModule>

    #
    # PHP 4.x:
    #
    <IfModule mod_php4.c>
    AddType application/x-httpd-php .php
    AddType application/x-httpd-php .php4
    AddType application/x-httpd-php-source .phps
    </IfModule>

    #
    # mod_dtcl can execute tcl scripts
    #
    <IfModule mod_dtcl.c>
    AddType application/x-httpd-tcl .ttml
    AddType application/x-dtcl-tcl  .tcl
    </IfModule>

    AddType text/vnd.wap.wml wml
    AddType text/vnd.wap.wmlscript wmls
    AddType application/vnd.wap.wmlc wmlc
    AddType application/vnd.wap.wmlscriptc wmlsc
    Addtype image/vnd.wap.wbmp wbmp
    #
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    #
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    #
    # To use CGI scripts:
    #
    AddHandler cgi-script .cgi

    #
    # To use server-parsed HTML files
    #
    AddType text/html .shtml
    AddHandler server-parsed .shtml

    #
    # Uncomment the following line to enable Apache's send-asis HTTP file
    # feature
    #
    #AddHandler send-as-is asis

    #
    # If you wish to use server-parsed imagemap files, use
    #
    #AddHandler imap-file map

    #
    # To enable type maps, you might want to use
    #
    #AddHandler type-map var

</IfModule>
# End of document types.

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#
#MetaDir .web

#
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#
#MetaSuffix .meta

#
# Customizable error response (Apache style)
#  these come in three flavors
#
#    1) plain text
#ErrorDocument 500 "The server made a boo boo.
#  n.b.  the single leading (") marks it as text, it does not get output
#
#    2) local redirects
#ErrorDocument 404 /missing.html
#  to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
#  N.B.: You can redirect to a script or a document using server-side-includes.
#
#    3) external redirects
#ErrorDocument 402 http://some.other-server.com/subscription_info.html
#  N.B.: Many of the environment variables associated with the original
#  request will *not* be available to such a script.

#
# Customize behaviour based on the browser
#
<IfModule mod_setenvif.c>

    #
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    #
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0

    #
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    #
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0

</IfModule>
# End of browser customization directives

#
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your-domain.com" to match your domain to enable.
#
# Note: apache is started (by /etc/init.d/apache) with -D STATUS if 
# HTTPD_SEC_ACCESS_SERVERINFO is set to "yes" in 
# /etc/sysconfig/apache.

<IfDefine STATUS>
<Location /server-status>
    SetHandler server-status
    Order deny,allow
    Deny from all
    Allow from localhost
</Location>

#
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your-domain.com" to match your domain to enable.
#
<Location /server-info>
    SetHandler server-info
    Order deny,allow
    Deny from all
    Allow from localhost
</Location>

#
# enable perl-status for mod_perl
#
<IfModule mod_perl.c>
<Location /perl-status>
    SetHandler perl-script
    PerlHandler Apache::Status
    order deny,allow
    deny from all
    allow from localhost
</Location>
</IfModule>
</IfDefine>


#
# There have been reports of people trying to abuse an old bug from pre-1.1
# days.  This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging 
# script on phf.apache.org.  Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
#    Deny from all
#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>

#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#    ProxyRequests On

#    <Directory proxy:*>
#        Order deny,allow
#        Deny from all
#        Allow from .your-domain.com
#    </Directory>

    #
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    #
#    ProxyVia On

    #
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    #
#    CacheRoot "/var/cache/httpd"
#    CacheSize 5
#    CacheGcInterval 4
#    CacheMaxExpire 24
#    CacheLastModifiedFactor 0.1
#    CacheDefaultExpire 1
#    NoCache a-domain.com another-domain.edu joes.garage-sale.com

#</IfModule>
# End of proxy directives.

### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
#NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *:80>
#    ServerAdmin webmaster@dummy-host.example.com
#    DocumentRoot /www/docs/dummy-host.example.com
#    ServerName dummy-host.example.com
#    ErrorLog logs/dummy-host.example.com-error_log
#    CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>

#<VirtualHost _default_:*>
#</VirtualHost>

##
##  SSL Global Context
##
##  All SSL configuration in this context applies both to
##  the main server and all SSL-enabled virtual hosts.
##

#
#   Some MIME-types for downloading Certificates and CRLs
#
<IfDefine SSL>
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl    .crl
</IfDefine>

<IfModule mod_ssl.c>

#   Pass Phrase Dialog:
#   Configure the pass phrase gathering process.
#   The filtering dialog program (`builtin' is a internal
#   terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog  builtin

#   Inter-Process Session Cache:
#   Configure the SSL Session Cache: First the mechanism 
#   to use and second the expiring timeout (in seconds, default=300).
#   shm means the same as shmht. 
#   Note that on most platforms shared memory segments are not allowed to be on 
#   network-mounted drives, so in that case you need to use the dbm method.
#SSLSessionCache        none
#SSLSessionCache        shmht:/var/run/ssl_scache(512000)
#SSLSessionCache        shmcb:/var/run/ssl_scache(512000)
#SSLSessionCache        dbm:/var/run/ssl_scache
SSLSessionCache         shmcb:/var/lib/httpd/ssl_scache
SSLSessionCacheTimeout  600

#   Semaphore:
#   Configure the path to the mutual exclusion semaphore the
#   SSL engine uses internally for inter-process synchronization. 
#SSLMutex  file:/var/run/ssl_mutex
SSLMutex  sem

#   Pseudo Random Number Generator (PRNG):
#   Configure one or more sources to seed the PRNG of the 
#   SSL library. The seed data should be of good random quality.
#   WARNING! On some platforms /dev/random blocks if not enough entropy
#   is available. This means you then cannot use the /dev/random device
#   because it would lead to very long connection times (as long as
#   it requires to make more entropy available). But usually those
#   platforms additionally provide a /dev/urandom device which doesn't
#   block. So, if available, use this one instead. Read the mod_ssl User
#   Manual for more details.
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
#SSLRandomSeed startup file:/dev/random  512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random  512
#SSLRandomSeed connect file:/dev/urandom 512

#   Logging:
#   The home of the dedicated SSL protocol logfile. Errors are
#   additionally duplicated in the general error log file.  Put
#   this somewhere where it cannot be used for symlink attacks on
#   a real server (i.e. somewhere where only root can write).
#   Log levels are (ascending order: higher ones include lower ones):
#   none, error, warn, info, trace, debug.
SSLLog      /var/log/httpd/ssl_engine_log
SSLLogLevel info

</IfModule>

<IfDefine SSL>

##
## SSL Virtual Host Context
##

<VirtualHost _default_:443>

#  General setup for the virtual host
DocumentRoot "/srv/www/htdocs"
ServerName new.host.name
ServerAdmin you@your.address
ErrorLog /var/log/httpd/error_log
TransferLog /var/log/httpd/access_log

#   SSL Engine Switch:
#   Enable/Disable SSL for this virtual host.
SSLEngine on

#   SSL Cipher Suite:
#   List the ciphers that the client is permitted to negotiate.
#   See the mod_ssl documentation for a complete list.
SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL

#   Server Certificate:
#   Point SSLCertificateFile at a PEM encoded certificate.  If
#   the certificate is encrypted, then you will be prompted for a
#   pass phrase.  Note that a kill -HUP will prompt again. A test
#   certificate can be generated with `make certificate' under
#   built time. Keep in mind that if you've both a RSA and a DSA
#   certificate you can configure both in parallel (to also allow
#   the use of DSA ciphers, etc.)
SSLCertificateFile /etc/httpd/ssl.crt/server.crt
#SSLCertificateFile /etc/httpd/ssl.crt/server-dsa.crt

#   Server Private Key:
#   If the key is not combined with the certificate, use this
#   directive to point at the key file.  Keep in mind that if
#   you've both a RSA and a DSA private key you can configure
#   both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/httpd/ssl.key/server.key
#SSLCertificateKeyFile /etc/httpd/ssl.key/server-dsa.key

#   Server Certificate Chain:
#   Point SSLCertificateChainFile at a file containing the
#   concatenation of PEM encoded CA certificates which form the
#   certificate chain for the server certificate. Alternatively
#   the referenced file can be the same as SSLCertificateFile
#   when the CA certificates are directly appended to the server
#   certificate for convinience.
#SSLCertificateChainFile /etc/httpd/ssl.crt/ca.crt

#   Certificate Authority (CA):
#   Set the CA certificate verification path where to find CA
#   certificates for client authentication or alternatively one
#   huge file containing all of them (file must be PEM encoded)
#   Note: Inside SSLCACertificatePath you need hash symlinks
#         to point to the certificate files. Use the provided
#         Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /etc/httpd/ssl.crt
#SSLCACertificateFile /etc/httpd/ssl.crt/ca-bundle.crt

#   Certificate Revocation Lists (CRL):
#   Set the CA revocation path where to find CA CRLs for client
#   authentication or alternatively one huge file containing all
#   of them (file must be PEM encoded)
#   Note: Inside SSLCARevocationPath you need hash symlinks
#         to point to the certificate files. Use the provided
#         Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /etc/httpd/ssl.crl
#SSLCARevocationFile /etc/httpd/ssl.crl/ca-bundle.crl

#   Client Authentication (Type):
#   Client certificate verification type and depth.  Types are
#   none, optional, require and optional_no_ca.  Depth is a
#   number which specifies how deeply to verify the certificate
#   issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth  10

#   Access Control:
#   With SSLRequire you can do per-directory access control based
#   on arbitrary complex boolean expressions containing server
#   variable checks and other lookup directives.  The syntax is a
#   mixture between C and Perl.  See the mod_ssl documentation
#   for more details.
#<Location />
#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>

#   SSL Engine Options:
#   Set various options for the SSL engine.
#   o FakeBasicAuth:
#     Translate the client X.509 into a Basic Authorisation.  This means that
#     the standard Auth/DBMAuth methods can be used for access control.  The
#     user name is the `one line' version of the client's X.509 certificate.
#     Note that no password is obtained from the user. Every entry in the user
#     file needs this password: `xxj31ZMTZzkVA'.
#   o ExportCertData:
#     This exports two additional environment variables: SSL_CLIENT_CERT and
#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
#     server (always existing) and the client (only existing when client
#     authentication is used). This can be used to import the certificates
#     into CGI scripts.
#   o StdEnvVars:
#     This exports the standard SSL/TLS related `SSL_*' environment variables.
#     Per default this exportation is switched off for performance reasons,
#     because the extraction step is an expensive operation and is usually
#     useless for serving static content. So one usually enables the
#     exportation for CGI and SSI requests only.
#   o CompatEnvVars:
#     This exports obsolete environment variables for backward compatibility
#     to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
#     to provide compatibility to existing CGI scripts.
#   o StrictRequire:
#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
#     under a "Satisfy any" situation, i.e. when it applies access is denied
#     and no other module can change it.
#   o OptRenegotiate:
#     This enables optimized SSL connection renegotiation handling when SSL
#     directives are used in per-directory context. 
#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
<Files ~ "\.(cgi|shtml|phtml|php3?)$">
    SSLOptions +StdEnvVars
</Files>
<Directory "/srv/www/cgi-bin">
    SSLOptions +StdEnvVars
</Directory>

#   SSL Protocol Adjustments:
#   The safe and default but still SSL/TLS standard compliant shutdown
#   approach is that mod_ssl sends the close notify alert but doesn't wait for
#   the close notify alert from client. When you need a different shutdown
#   approach you can use one of the following variables:
#   o ssl-unclean-shutdown:
#     This forces an unclean shutdown when the connection is closed, i.e. no
#     SSL close notify alert is send or allowed to received.  This violates
#     the SSL/TLS standard but is needed for some brain-dead browsers. Use
#     this when you receive I/O errors because of the standard approach where
#     mod_ssl sends the close notify alert.
#   o ssl-accurate-shutdown:
#     This forces an accurate shutdown when the connection is closed, i.e. a
#     SSL close notify alert is send and mod_ssl waits for the close notify
#     alert of the client. This is 100% SSL/TLS standard compliant, but in
#     practice often causes hanging connections with brain-dead browsers. Use
#     this only for browsers where you know that their SSL implementation
#     works correctly. 
#   Notice: Most problems of broken clients are also related to the HTTP
#   keep-alive facility, so you usually additionally want to disable
#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
#   "force-response-1.0" for this.
SetEnvIf User-Agent ".*MSIE.*" \
         nokeepalive ssl-unclean-shutdown \
         downgrade-1.0 force-response-1.0

#   Per-Server Logging:
#   The home of a custom SSL log file. Use this when you want a
#   compact non-error SSL logfile on a virtual host basis.
CustomLog /var/log/httpd/ssl_request_log \
          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>                                  

</IfDefine>



# Note:
#
# The file that is included below is generated by SuSEconfig.
#
# In this file, SuSEconfig puts Include statements it finds
# in /etc/httpd/modules/* (lines with "File:..." or "Include:..."). 
# If such a module file also contains a "Variable:..." statement, the settings 
# in /etc/sysconfig/apache will be honored. 
# 
# In addition, any files listed in the HTTPD_CONF_INCLUDE_FILES variable 
# in /etc/sysconfig/apache will be included here by SuSEconfig. 
# This allows you to add e.g. VirtualHost statements without touching
# /etc/httpd/httpd.conf itself, which means that SuSEconfig will continue doing its
# job (since it would not touch httpd.conf any longer as soon it detects changes
# made by the admin via the md5sum mechanism)

Include /etc/httpd/suse_include.conf
Include /etc/httpd/conf/loncapa_apache.conf