Annotation of doc/loncapafiles/buildfiles.lpml, revision 1.7
1.1 harris41 1: <!DOCTYPE lpml PUBLIC "-//TUX/DTD lpml 1.0 Final//EN"
2: "http://lpml.sourceforge.net/DTD/lpml.dtd">
3: <!-- buildfiles.lpml -->
4:
1.7 ! harris41 5: <!-- $Id: buildfiles.lpml,v 1.6 2003/01/13 00:16:08 harris41 Exp $ -->
1.1 harris41 6:
7: <!--
8:
9: Copyright Michigan State University Board of Trustees
10:
11: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
12:
13: LON-CAPA is free software; you can redistribute it and/or modify
14: it under the terms of the GNU General Public License as published by
15: the Free Software Foundation; either version 2 of the License, or
16: (at your option) any later version.
17:
18: LON-CAPA is distributed in the hope that it will be useful,
19: but WITHOUT ANY WARRANTY; without even the implied warranty of
20: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21: GNU General Public License for more details.
22:
23: You should have received a copy of the GNU General Public License
24: along with LON-CAPA; if not, write to the Free Software
25: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
26:
27: /home/httpd/html/adm/gpl.txt
28:
29: http://www.lon-capa.org/
30:
31: -->
32:
33: <!-- Default values must be defined before specific values. -->
34: <!-- If no 'dist' attribute is specified, then it is always installed. -->
35: <!-- If 'dist' attribute is set to 'default', then the specification. -->
36: <!-- is accepted if an alternative distribution is not requested or not -->
37: <!-- defined. -->
38:
39: <lpml>
40: <specialnotices>
41: <specialnotice dist='default'>
42: </specialnotice>
43: </specialnotices>
44: <targetroot>/build</targetroot>
45: <sourceroot>/home/user/loncapa/</sourceroot>
46: <categories>
47: <category name="system file" type="runtime">
48: <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
49: <abbreviation>systemfile</abbreviation>
50: </category>
51: <category name="system file" type="development">
52: <chmod dist='default'>0644</chmod><chown dist='default'>root:root</chown>
53: <abbreviation>systemfile</abbreviation>
54: </category>
55: <category name="standard" type="runtime">
56: <chmod dist='default'>0755</chmod><chown dist='default'>root:root</chown>
57: <abbreviation>directory</abbreviation>
58: </category>
59: <category name="standard" type="development">
60: <chmod dist='default'>0755</chmod><chown dist='default'>root:root</chown>
61: <abbreviation>directory</abbreviation>
62: </category>
63: </categories>
64: <directories>
65: </directories>
66: <files>
67: <file>
68: <source>loncom/build/Makefile</source>
69: <target dist='default'>Makefile</target>
70: <categoryname>system file</categoryname>
71: <description>
72: Makefile for LON-CAPA
73: </description>
74: <note>
75: </note>
1.5 albertel 76: <dependencies>
77: doc/loncapafiles/configurable.gif;
78: doc/loncapafiles/directory.gif;
79: doc/loncapafiles/emptydirectory.gif;
80: doc/loncapafiles/graphicfile.gif;
81: doc/loncapafiles/handler.gif;
82: doc/loncapafiles/interfacefile.gif;
83: doc/loncapafiles/link.gif;
84: doc/loncapafiles/rootscript.gif;
85: doc/loncapafiles/script.gif;
86: doc/loncapafiles/setuid.gif;
87: doc/loncapafiles/static.gif;
88: doc/loncapafiles/systemfile.gif
89: </dependencies>
1.1 harris41 90: </file>
91: <file>
92: <source>doc/loncapafiles/loncapafiles.lpml</source>
93: <target dist='default'>loncapafiles.lpml</target>
94: <categoryname>system file</categoryname>
95: <description>
96: Describes the files that implement LON-CAPA on the filesystem
97: </description>
98: <note>
99: </note>
100: </file>
101: <file>
102: <source>doc/loncapafiles/buildfiles.lpml</source>
103: <target dist='default'>buildfiles.lpml</target>
104: <categoryname>system file</categoryname>
105: <description>
106: Describes the files that implement the building of LON-CAPA inside the source
107: file tree.
1.6 harris41 108: </description>
109: <note>
110: </note>
111: </file>
112: <file>
113: <source>doc/loncapafiles/installfiles.lpml</source>
114: <target dist='default'>installfiles.lpml</target>
115: <categoryname>system file</categoryname>
116: <description>
117: Describes the files that help automate LON-CAPA installations on specific
118: operating systems.
1.1 harris41 119: </description>
120: <note>
121: </note>
122: </file>
123: <file>
124: <source>doc/loncapafiles/webserver.piml</source>
125: <target dist='default'>webserver.piml</target>
126: <categoryname>system file</categoryname>
127: <description>
128: Post-installation of web server configuration files
1.3 albertel 129: </description>
130: <note>
131: </note>
132: </file>
133: <file>
134: <source>doc/loncapafiles/reseval_fixup.piml</source>
135: <target dist='default'>reseval_fixup.piml</target>
136: <categoryname>system file</categoryname>
137: <description>
138: Migrates reseval.db to nohist_eseval.db, deletes useless hist file
1.1 harris41 139: </description>
140: <note>
141: </note>
142: </file>
143: <file>
1.4 albertel 144: <source>doc/loncapafiles/clearoutoldspreadsheetcache.piml</source>
145: <target dist='default'>clearoutoldspreadsheetcache.piml</target>
146: <categoryname>system file</categoryname>
147: <description>
148: Deletes all of the old spreadsheet cache files, the ones generated prior
149: to version 0.6 were incorrect
150: </description>
151: <note>
152: </note>
153: </file>
154: <file>
1.1 harris41 155: <source>doc/loncapafiles/sanitycheck.piml</source>
156: <target dist='default'>sanitycheck.piml</target>
1.2 harris41 157: <categoryname>system file</categoryname>
158: <description>
159: Checks LON-CAPA system for frequently occuring bugs.
160: </description>
161: <note>
162: </note>
163: </file>
164: <file>
165: <source>doc/loncapafiles/updatequery.piml</source>
166: <target dist='default'>updatequery.piml</target>
1.1 harris41 167: <categoryname>system file</categoryname>
168: <description>
169: Checks LON-CAPA system for frequently occuring bugs.
1.4 albertel 170: </description>
171: <note>
172: </note>
173: </file>
174: <file>
175: <source>doc/loncapafiles/sendmail_fix.piml</source>
176: <target dist='default'>sendmail_fix.piml</target>
177: <categoryname>system file</categoryname>
178: <description>
179: Checks LON-CAPA system for sendmail permissions error.
1.1 harris41 180: </description>
181: <note>
182: </note>
183: </file>
184: <file>
185: <source>doc/loncapafiles/valid_hosts.xfml</source>
186: <target dist='default'>valid_hosts.xfml</target>
187: <categoryname>system file</categoryname>
188: <description>
189: Useful for extracting (and pushing/pulling) information relevant
190: to hosts.tab.
191: </description>
192: <note>
193: </note>
194: </file>
195: <file>
196: <source>loncom/build/check-rpms</source>
197: <target dist='default'>check-rpms</target>
198: <categoryname>system file</categoryname>
199: <description>
200: script for checking RPMS against an RPM repository
201: </description>
202: <note>
203: </note>
204: </file>
205: <file>
206: <source>loncom/build/distprobe</source>
207: <target dist='default'>distprobe</target>
208: <categoryname>system file</categoryname>
209: <description>
210: for probing operating system flavor and version
211: </description>
212: <note>
213: </note>
214: </file>
215: <file>
216: <source>loncom/build/doc_template.pl</source>
217: <target dist='default'>doc_template.pl</target>
218: <categoryname>system file</categoryname>
219: <description>
220: for making fancy install.lon-capa.org pages
221: </description>
222: <note>
223: </note>
224: </file>
225: <file>
226: <source>loncom/build/filecompare.pl</source>
227: <target dist='default'>filecompare.pl</target>
228: <categoryname>system file</categoryname>
229: <description>
230: rigorously compare many different values associated between files
231: </description>
232: <note>
233: </note>
234: </file>
235: <file>
236: <source>loncom/build/loncaparestoreconfigurations</source>
237: <target dist='default'>loncaparestoreconfigurations</target>
238: <categoryname>system file</categoryname>
239: <description>
240: intelligently restore configuration values
241: </description>
242: <note>
243: </note>
244: </file>
245: <file>
246: <source>loncom/build/lpml.dtd</source>
247: <target dist='default'>lpml.dtd</target>
248: <categoryname>system file</categoryname>
249: <description>
250: DocumentType for LPML
251: </description>
252: <note>
253: </note>
254: </file>
255: <file>
256: <source>loncom/build/lpml_html_posteval.pl</source>
257: <target dist='default'>lpml_html_posteval.pl</target>
258: <categoryname>system file</categoryname>
259: <description>
260: </description>
261: <note>
262: </note>
263: </file>
264: <file>
265: <source>loncom/build/lpml_parse.pl</source>
266: <target dist='default'>lpml_parse.pl</target>
267: <categoryname>system file</categoryname>
268: <description>
269: parse apart the loncapafiles.lpml and buildfiles.lpml
270: </description>
271: <note>
272: </note>
273: </file>
274: <file>
275: <source>loncom/build/make_domain_coordinator.pl</source>
276: <target dist='default'>make_domain_coordinator.pl</target>
277: <categoryname>system file</categoryname>
278: <description>
279: make a domain coordinator on a new LON-CAPA system
280: </description>
281: <note>
282: </note>
283: </file>
284: <file>
285: <source>loncom/build/piml.dtd</source>
286: <target dist='default'>piml.dtd</target>
287: <categoryname>system file</categoryname>
288: <description>
289: DocumentType definition for PIML (part of the LPML system)
290: </description>
291: <note>
292: </note>
293: </file>
294: <file>
295: <source>loncom/build/piml_parse.pl</source>
296: <target dist='default'>piml_parse.pl</target>
297: <categoryname>system file</categoryname>
298: <description>
299: parse a PIML file
300: </description>
301: <note>
302: </note>
303: </file>
304: <file>
305: <source>loncom/build/pod2html.sh</source>
306: <target dist='default'>pod2html.sh</target>
307: <categoryname>system file</categoryname>
308: <description>
309: make HTML documentation pages
310: </description>
311: <note>
312: </note>
313: </file>
314: <file>
315: <source>loncom/build/pod2man.sh</source>
316: <target dist='default'>pod2man.sh</target>
317: <categoryname>system file</categoryname>
318: <description>
319: make UNIX-style manual pages
320: </description>
321: <note>
322: </note>
323: </file>
324: <file>
325: <source>loncom/build/verify.pl</source>
326: <target dist='default'>verify.pl</target>
327: <categoryname>system file</categoryname>
328: <description>
329: wraps around filecompare.pl for posteval LPML statements
330: </description>
331: <note>
332: </note>
333: </file>
334: <file>
335: <source>loncom/build/verifymodown.pl</source>
336: <target dist='default'>verifymodown.pl</target>
337: <categoryname>system file</categoryname>
338: <description>
339: double-checks modification and ownership on files
340: </description>
341: <note>
342: </note>
343: </file>
344: <file>
345: <source>loncom/build/xfml.dtd</source>
346: <target dist='default'>xfml.dtd</target>
347: <categoryname>system file</categoryname>
348: <description>
349: DocumentType definition for XFML (part of the LPML system)
350: </description>
351: <note>
352: </note>
353: </file>
354: <file>
355: <source>loncom/build/xfml_parse.pl</source>
356: <target dist='default'>xfml_parse.pl</target>
357: <categoryname>system file</categoryname>
358: <description>
359: parses XFML files
360: </description>
361: <note>
362: </note>
363: </file>
364: </files>
365: </lpml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to buildfiles.lpml CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / loncapafiles