Annotation of doc/loncapafiles/ntpcheck.piml, revision 1.14
1.1 matthew 1: <!DOCTYPE piml PUBLIC "-//TUX/DTD piml 1.0 Final//EN"
2: "http://lpml.sourceforge.net/DTD/piml.dtd">
1.2 matthew 3: <!-- ntpcheck.piml -->
1.1 matthew 4: <!-- Matthew Hall -->
5:
1.14 ! golterma 6: <!-- $Id: ntpcheck.piml,v 1.13 2011/10/25 13:01:32 raeburn Exp $ -->
1.1 matthew 7:
8: <!--
9:
10: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
11:
12: LON-CAPA is free software; you can redistribute it and/or modify
13: it under the terms of the GNU General Public License as published by
14: the Free Software Foundation; either version 2 of the License, or
15: (at your option) any later version.
16:
17: LON-CAPA is distributed in the hope that it will be useful,
18: but WITHOUT ANY WARRANTY; without even the implied warranty of
19: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20: GNU General Public License for more details.
21:
22: You should have received a copy of the GNU General Public License
23: along with LON-CAPA; if not, write to the Free Software
24: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
25:
26: /home/httpd/html/adm/gpl.txt
27:
28: http://www.lon-capa.org/
29:
30: -->
31:
32: <piml>
33: <targetroot>/</targetroot>
34: <files>
35: <file>
1.10 raeburn 36: <target dist="default"></target>
1.1 matthew 37: <perlscript mode="fg">
38: print "Checking to be sure the Network Time Protocol is running properly.\n";
39: print "For more information on ntpd please see http://www.ntp.org/\n";
1.7 albertel 40: my $NTPD;
1.13 raeburn 41: if (('<DIST />' eq 'fedora15') || ('<DIST />' eq 'fedora16')) {
42: $NTPD = 'ntpd';
43: if (!-e '/usr/sbin/ntpd') {
44: print "ntp is not installed.\n";
45: exit;
46: } else {
47: if (open(PIPE,"systemctl status ntpd.service|")) {
48: my @lines = <PIPE>;
49: chomp(@lines);
50: my $is_running;
51: foreach my $line (@lines) {
52: if ($line =~ /Active: active/) {
53: $is_running = 1;
54: last;
55: }
56: }
57: close(PIPE);
58: if (!$is_running) {
59: print "WARNING: ntp is installed but is not currently running.\nPlease verify the configuration of ntp in /etc/ntp.conf and /etc/ntp/step-tickers\nStart ntp by executing\n systemctl start ntpd.service|\n";
60: }
61: } else {
62: print "Could not determine ntp status.\n";
63: }
64: }
1.7 albertel 65: } else {
1.13 raeburn 66: if (-e "/etc/init.d/ntpd") {
67: $NTPD = "ntpd";
68: } elsif (-e "/etc/init.d/xntpd") {
69: $NTPD = "xntpd";
70: } elsif (-e "/etc/init.d/ntp") {
71: $NTPD = "ntp";
72: } else {
73: print "ntp is not installed.\n";
74: exit;
75: }
76: my $value = `/etc/init.d/$NTPD status`;
1.14 ! golterma 77: if ($value !~ /pid \d*)/i) {
1.13 raeburn 78: print "WARNING: ntp is installed but is not currently running.\nPlease verify the configuration of ntp in /etc/ntp.conf and /etc/ntp/step-tickers\nStart ntp by executing\n /etc/init.d/$NTPD start\n";
79: }
1.1 matthew 80: }
81: # chkconfig barfs to stderr if the target isn't set up right.
1.10 raeburn 82: my $checking_bin;
83: my $restartchk;
1.11 raeburn 84: if ('<DIST />' eq 'debian5' || '<DIST />' eq 'debian6' || '<DIST />' eq 'ubuntu6' || '<DIST />' eq 'ubuntu8' || '<DIST />' eq 'ubuntu10') {
1.10 raeburn 85: $checking_bin = '/usr/sbin/sysv-rc-conf';
86: } else {
87: $checking_bin = '/sbin/chkconfig';
88: }
1.13 raeburn 89: if (('<DIST />' eq 'fedora15') || ('<DIST />' eq 'fedora16')) {
1.12 raeburn 90: if (!-l "/etc/systemd/system/multi-user.target.wants/ntpd.service") {
91: print "**** WARNING: ntpd is not configured to run at boot. To correct this run:\nsystemctl enable ntpd.service\n";
92: }
1.1 matthew 93: exit;
1.12 raeburn 94: } else {
95: $restartchk = `$checking_bin --list $NTPD 2>/dev/null`;
96: if ($restartchk eq '') {
97: print "**** WARNING: ntpd is either not installed or not configured to run at boot.\n";
98: exit;
99: }
100: if ($restartchk =~ /^error reading information on service / ||
101: $restartchk !~ /\d:(on|off)/) {
102: print "**** WARNING: Unable to check status $NTPD with $checking_bin.\n";
103: exit;
104: }
105: if ($restartchk !~ /\s3:on/) {
106: print "**** WARNING: ntpd is not set to start at runlevel 3. To correct this run:\n$checking_bin --level 345 $NTPD on\n";
107: exit;
108: }
109: if ($restartchk !~ /\s5:on/) {
110: print "**** WARNING: ntpd is not set to start at runlevel 5. To correct this run:\n$checking_bin --level 345 $NTPD on\n";
111: exit;
112: }
1.1 matthew 113: }
114: </perlscript>
115: </file>
116: </files>
117: </piml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>