Annotation of doc/loncapafiles/webserver.piml, revision 1.4
1.1 harris41 1: <!-- webserver.piml -->
2: <!-- Scott Harrison -->
3:
1.4 ! harris41 4: <!-- $Id: webserver.piml,v 1.3 2002/02/02 13:08:42 harris41 Exp $ -->
1.1 harris41 5:
6: <!--
7:
8: Copyright Michigan State University Board of Trustees
9:
10: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
11:
12: LON-CAPA is free software; you can redistribute it and/or modify
13: it under the terms of the GNU General Public License as published by
14: the Free Software Foundation; either version 2 of the License, or
15: (at your option) any later version.
16:
17: LON-CAPA is distributed in the hope that it will be useful,
18: but WITHOUT ANY WARRANTY; without even the implied warranty of
19: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20: GNU General Public License for more details.
21:
22: You should have received a copy of the GNU General Public License
23: along with LON-CAPA; if not, write to the Free Software
24: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
25:
26: /home/httpd/html/adm/gpl.txt
27:
28: http://www.lon-capa.org/
29:
30: -->
31:
32: <!-- Default values must be defined before specific values. -->
33: <!-- If no 'dist' attribute is specified, then it is always installed. -->
34: <!-- If 'dist' attribute is set to 'default', then the specification. -->
35: <!-- is accepted if an alternative distribution is not requested or not -->
36: <!-- defined. -->
37:
38: <piml>
1.2 harris41 39: <targetroot>/abc/</targetroot>
40: <specialnotices>
41: <specialnotice>
42: </specialnotice>
43: </specialnotices>
1.1 harris41 44: <files>
45: <file>
46: <target dist='default'>/etc/httpd/conf/httpd.conf</target>
47: <note>This is always expected for any version of Apache</note>
48: <dependencies dist='default'>
49: /etc/httpd/conf/httpd.conf
50: </dependencies>
51: <perlscript mode='fg'>
52: unless (-e "<TARGET />") {
53: print 'ERROR! httpd.conf should exist! Are you missing the Apache '.
54: 'software package';
55: }
56: else {
1.3 harris41 57: $flag=0;
58: open IN, "<<TARGET />";
1.4 ! harris41 59: while (<IN>) { if (/^\s*Include\s+conf\/srm.conf/) { $flag=1; } }
1.3 harris41 60: close IN;
61: unless ($flag==0) {
1.1 harris41 62: open OUT,">><TARGET />";
1.4 ! harris41 63: print OUT 'Include conf/srm.conf'."\n";
1.3 harris41 64: close OUT;
65: }
66: $flag=0;
67: open IN, "<<TARGET />";
1.4 ! harris41 68: while (<IN>) { if (/^\s*Include\s+conf\/access.conf/) { $flag=1; } }
1.3 harris41 69: close IN;
70: unless ($flag==0) {
71: open OUT,">><TARGET />";
1.4 ! harris41 72: print OUT 'Include conf/access.conf'."\n";
1.1 harris41 73: close OUT;
1.3 harris41 74: }
75: $flag=0;
76: my $eflag=0;
77: open IN, "<<TARGET />";
78: while (<IN>) {
1.4 ! harris41 79: if (/^\s*Include\s+conf\/loncapa.conf/) {
1.3 harris41 80: $flag=1;
81: }
82: }
83: close IN;
84: unless ($flag==0) {
85: open OUT,">><TARGET />";
1.4 ! harris41 86: print OUT 'Include conf/loncapa.conf'."\n";
1.3 harris41 87: close OUT;
88: }
1.1 harris41 89: }
90: </perlscript>
91: </file>
92: <file>
93: <target dist='default'>/etc/httpd/conf/access.conf</target>
94: <note>This may or may not exist on a system depending on the version of
95: Apache</note>
96: <dependencies dist='default'>
97: /etc/httpd/conf/access.conf
98: </dependencies>
99: <perlscript mode='fg'>
1.2 harris41 100: unless (-e "<TARGET />") {
101: print <<;
102: WARNING! access.conf is not currently present on your system.
103: This is either due to
104: * you are missing the Apache software package,
105: * you have a newer version of Apache that does not
106: ordinarily install an access.conf
107: * configuration files are installed in a directory location
108: different than for <TARGET />
109: For backwards compatibility,
110: <TARGET /> is being generated.
111: END
112: }
1.3 harris41 113: my $flag=0;
114: open IN, "<<TARGET />";
1.4 ! harris41 115: while (<IN>) { if (/^\s*Include\s+conf\/loncapa.conf/) { $flag=1; } }
1.3 harris41 116: close IN;
117: unless ($flag==0) {
1.1 harris41 118: open OUT,">><TARGET />";
1.4 ! harris41 119: print OUT 'Include conf/loncapa.conf'."\n";
1.1 harris41 120: close OUT;
1.3 harris41 121: }
1.1 harris41 122: </perlscript>
123: </file>
124: <file>
125: <target dist='default'>/etc/httpd/conf/srm.conf</target>
126: <note>This may or may not exist on a system depending on the version of
127: Apache</note>
128: <dependencies dist='default'>
129: /etc/httpd/conf/srm.conf
130: </dependencies>
131: <perlscript mode='fg'>
1.2 harris41 132: unless (-e "<TARGET />") {
133: print <<;
134: WARNING! srm.conf is not currently present on your system.
135: This is either due to
136: * you are missing the Apache software package,
137: * you have a newer version of Apache that does not
138: ordinarily install an srm.conf
139: * configuration files are installed in a directory location
140: different than for <TARGET />
141: For backwards compatibility,
142: <TARGET /> is being generated.
143: END
144: }
1.3 harris41 145: my $flag=0;
146: open IN, "<<TARGET />";
1.4 ! harris41 147: while (<IN>) { if (/^\s*Include\s+conf\/loncapa.conf/) { $flag=1; } }
1.3 harris41 148: close IN;
149: unless ($flag==0) {
1.1 harris41 150: open OUT,">><TARGET />";
1.4 ! harris41 151: print OUT 'Include conf/loncapa.conf'."\n";
1.1 harris41 152: close OUT;
1.3 harris41 153: }
1.1 harris41 154: </perlscript>
155: </file>
156: </files>
157: </piml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to webserver.piml CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / loncapafiles