Annotation of doc/loncapafiles/webserver.piml, revision 1.9
1.8 harris41 1: <!DOCTYPE piml PUBLIC "-//TUX/DTD piml 1.0 Final//EN"
2: "http://lpml.sourceforge.net/DTD/piml.dtd">
1.1 harris41 3: <!-- webserver.piml -->
4: <!-- Scott Harrison -->
5:
1.9 ! harris41 6: <!-- $Id: webserver.piml,v 1.8 2002/04/14 20:34:32 harris41 Exp $ -->
1.1 harris41 7:
8: <!--
9:
10: Copyright Michigan State University Board of Trustees
11:
12: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
13:
14: LON-CAPA is free software; you can redistribute it and/or modify
15: it under the terms of the GNU General Public License as published by
16: the Free Software Foundation; either version 2 of the License, or
17: (at your option) any later version.
18:
19: LON-CAPA is distributed in the hope that it will be useful,
20: but WITHOUT ANY WARRANTY; without even the implied warranty of
21: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22: GNU General Public License for more details.
23:
24: You should have received a copy of the GNU General Public License
25: along with LON-CAPA; if not, write to the Free Software
26: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
27:
28: /home/httpd/html/adm/gpl.txt
29:
30: http://www.lon-capa.org/
31:
32: -->
33:
34: <!-- Default values must be defined before specific values. -->
35: <!-- If no 'dist' attribute is specified, then it is always installed. -->
36: <!-- If 'dist' attribute is set to 'default', then the specification. -->
37: <!-- is accepted if an alternative distribution is not requested or not -->
38: <!-- defined. -->
39:
40: <piml>
1.6 harris41 41: <targetroot>/</targetroot>
1.2 harris41 42: <specialnotices>
43: <specialnotice>
44: </specialnotice>
45: </specialnotices>
1.1 harris41 46: <files>
47: <file>
48: <target dist='default'>/etc/httpd/conf/httpd.conf</target>
49: <note>This is always expected for any version of Apache</note>
50: <dependencies dist='default'>
51: /etc/httpd/conf/httpd.conf
52: </dependencies>
53: <perlscript mode='fg'>
54: unless (-e "<TARGET />") {
55: print 'ERROR! httpd.conf should exist! Are you missing the Apache '.
56: 'software package';
57: }
58: else {
1.3 harris41 59: $flag=0;
60: open IN, "<<TARGET />";
1.4 harris41 61: while (<IN>) { if (/^\s*Include\s+conf\/srm.conf/) { $flag=1; } }
1.3 harris41 62: close IN;
1.7 harris41 63: unless ($flag==1) {
1.1 harris41 64: open OUT,">><TARGET />";
1.4 harris41 65: print OUT 'Include conf/srm.conf'."\n";
1.3 harris41 66: close OUT;
67: }
68: $flag=0;
69: open IN, "<<TARGET />";
1.4 harris41 70: while (<IN>) { if (/^\s*Include\s+conf\/access.conf/) { $flag=1; } }
1.3 harris41 71: close IN;
1.7 harris41 72: unless ($flag==1) {
1.3 harris41 73: open OUT,">><TARGET />";
1.4 harris41 74: print OUT 'Include conf/access.conf'."\n";
1.1 harris41 75: close OUT;
1.3 harris41 76: }
1.9 ! harris41 77: my $eflag=0;
! 78: $flag=0;
! 79: open IN, "<<TARGET />";
! 80: while (<IN>) {
! 81: if (/^\s*Include\s+conf\/loncapa_apache.conf/) {
! 82: $flag=1;
! 83: }
! 84: }
! 85: close IN;
! 86: unless ($flag==1) {
! 87: open OUT,">><TARGET />";
! 88: print OUT 'Include conf/loncapa_apache.conf'."\n";
! 89: close OUT;
! 90: }
1.3 harris41 91: $flag=0;
92: open IN, "<<TARGET />";
93: while (<IN>) {
1.4 harris41 94: if (/^\s*Include\s+conf\/loncapa.conf/) {
1.3 harris41 95: $flag=1;
96: }
97: }
98: close IN;
1.7 harris41 99: unless ($flag==1) {
1.3 harris41 100: open OUT,">><TARGET />";
1.4 harris41 101: print OUT 'Include conf/loncapa.conf'."\n";
1.3 harris41 102: close OUT;
103: }
1.1 harris41 104: }
105: </perlscript>
106: </file>
107: <file>
108: <target dist='default'>/etc/httpd/conf/access.conf</target>
109: <note>This may or may not exist on a system depending on the version of
110: Apache</note>
111: <dependencies dist='default'>
112: /etc/httpd/conf/access.conf
113: </dependencies>
114: <perlscript mode='fg'>
1.2 harris41 115: unless (-e "<TARGET />") {
1.7 harris41 116: print <<END;
1.2 harris41 117: WARNING! access.conf is not currently present on your system.
118: This is either due to
119: * you are missing the Apache software package,
120: * you have a newer version of Apache that does not
121: ordinarily install an access.conf
122: * configuration files are installed in a directory location
123: different than for <TARGET />
124: For backwards compatibility,
125: <TARGET /> is being generated.
126: END
127: }
1.3 harris41 128: my $flag=0;
129: open IN, "<<TARGET />";
1.9 ! harris41 130: while (<IN>) { if (/^\s*Include\s+conf\/loncapa_apache.conf/)
! 131: { $flag=1; } }
! 132: close IN;
! 133: unless ($flag==1) {
! 134: open OUT,">><TARGET />";
! 135: print OUT 'Include conf/loncapa_apache.conf'."\n";
! 136: close OUT;
! 137: $flag=0;
! 138: open IN, "<<TARGET />";
1.4 harris41 139: while (<IN>) { if (/^\s*Include\s+conf\/loncapa.conf/) { $flag=1; } }
1.3 harris41 140: close IN;
1.7 harris41 141: unless ($flag==1) {
1.1 harris41 142: open OUT,">><TARGET />";
1.4 harris41 143: print OUT 'Include conf/loncapa.conf'."\n";
1.1 harris41 144: close OUT;
1.3 harris41 145: }
1.1 harris41 146: </perlscript>
147: </file>
148: <file>
149: <target dist='default'>/etc/httpd/conf/srm.conf</target>
150: <note>This may or may not exist on a system depending on the version of
151: Apache</note>
152: <dependencies dist='default'>
153: /etc/httpd/conf/srm.conf
154: </dependencies>
155: <perlscript mode='fg'>
1.2 harris41 156: unless (-e "<TARGET />") {
1.7 harris41 157: print <<END;
1.2 harris41 158: WARNING! srm.conf is not currently present on your system.
159: This is either due to
160: * you are missing the Apache software package,
161: * you have a newer version of Apache that does not
162: ordinarily install an srm.conf
163: * configuration files are installed in a directory location
164: different than for <TARGET />
165: For backwards compatibility,
166: <TARGET /> is being generated.
167: END
168: }
1.3 harris41 169: my $flag=0;
1.9 ! harris41 170: open IN, "<<TARGET />";
! 171: while (<IN>) { if (/^\s*Include\s+conf\/loncapa_apache.conf/)
! 172: { $flag=1; } }
! 173: close IN;
! 174: unless ($flag==1) {
! 175: open OUT,">><TARGET />";
! 176: print OUT 'Include conf/loncapa_apache.conf'."\n";
! 177: close OUT;
! 178: $flag=0;
1.3 harris41 179: open IN, "<<TARGET />";
1.4 harris41 180: while (<IN>) { if (/^\s*Include\s+conf\/loncapa.conf/) { $flag=1; } }
1.3 harris41 181: close IN;
1.7 harris41 182: unless ($flag==1) {
1.1 harris41 183: open OUT,">><TARGET />";
1.4 harris41 184: print OUT 'Include conf/loncapa.conf'."\n";
1.1 harris41 185: close OUT;
1.3 harris41 186: }
1.1 harris41 187: </perlscript>
188: </file>
189: </files>
190: </piml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to webserver.piml CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / loncapafiles