1: <!DOCTYPE piml PUBLIC "-//TUX/DTD piml 1.0 Final//EN"
2: "http://lpml.sourceforge.net/DTD/piml.dtd">
3: <!-- webserver.piml -->
4: <!-- Scott Harrison -->
5:
6: <!-- $Id: webserver.piml,v 1.9 2002/05/12 19:02:18 harris41 Exp $ -->
7:
8: <!--
9:
10: Copyright Michigan State University Board of Trustees
11:
12: This file is part of the LearningOnline Network with CAPA (LON-CAPA).
13:
14: LON-CAPA is free software; you can redistribute it and/or modify
15: it under the terms of the GNU General Public License as published by
16: the Free Software Foundation; either version 2 of the License, or
17: (at your option) any later version.
18:
19: LON-CAPA is distributed in the hope that it will be useful,
20: but WITHOUT ANY WARRANTY; without even the implied warranty of
21: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22: GNU General Public License for more details.
23:
24: You should have received a copy of the GNU General Public License
25: along with LON-CAPA; if not, write to the Free Software
26: Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
27:
28: /home/httpd/html/adm/gpl.txt
29:
30: http://www.lon-capa.org/
31:
32: -->
33:
34: <!-- Default values must be defined before specific values. -->
35: <!-- If no 'dist' attribute is specified, then it is always installed. -->
36: <!-- If 'dist' attribute is set to 'default', then the specification. -->
37: <!-- is accepted if an alternative distribution is not requested or not -->
38: <!-- defined. -->
39:
40: <piml>
41: <targetroot>/</targetroot>
42: <specialnotices>
43: <specialnotice>
44: </specialnotice>
45: </specialnotices>
46: <files>
47: <file>
48: <target dist='default'>/etc/httpd/conf/httpd.conf</target>
49: <note>This is always expected for any version of Apache</note>
50: <dependencies dist='default'>
51: /etc/httpd/conf/httpd.conf
52: </dependencies>
53: <perlscript mode='fg'>
54: unless (-e "<TARGET />") {
55: print 'ERROR! httpd.conf should exist! Are you missing the Apache '.
56: 'software package';
57: }
58: else {
59: $flag=0;
60: open IN, "<<TARGET />";
61: while (<IN>) { if (/^\s*Include\s+conf\/srm.conf/) { $flag=1; } }
62: close IN;
63: unless ($flag==1) {
64: open OUT,">><TARGET />";
65: print OUT 'Include conf/srm.conf'."\n";
66: close OUT;
67: }
68: $flag=0;
69: open IN, "<<TARGET />";
70: while (<IN>) { if (/^\s*Include\s+conf\/access.conf/) { $flag=1; } }
71: close IN;
72: unless ($flag==1) {
73: open OUT,">><TARGET />";
74: print OUT 'Include conf/access.conf'."\n";
75: close OUT;
76: }
77: my $eflag=0;
78: $flag=0;
79: open IN, "<<TARGET />";
80: while (<IN>) {
81: if (/^\s*Include\s+conf\/loncapa_apache.conf/) {
82: $flag=1;
83: }
84: }
85: close IN;
86: unless ($flag==1) {
87: open OUT,">><TARGET />";
88: print OUT 'Include conf/loncapa_apache.conf'."\n";
89: close OUT;
90: }
91: $flag=0;
92: open IN, "<<TARGET />";
93: while (<IN>) {
94: if (/^\s*Include\s+conf\/loncapa.conf/) {
95: $flag=1;
96: }
97: }
98: close IN;
99: unless ($flag==1) {
100: open OUT,">><TARGET />";
101: print OUT 'Include conf/loncapa.conf'."\n";
102: close OUT;
103: }
104: }
105: </perlscript>
106: </file>
107: <file>
108: <target dist='default'>/etc/httpd/conf/access.conf</target>
109: <note>This may or may not exist on a system depending on the version of
110: Apache</note>
111: <dependencies dist='default'>
112: /etc/httpd/conf/access.conf
113: </dependencies>
114: <perlscript mode='fg'>
115: unless (-e "<TARGET />") {
116: print <<END;
117: WARNING! access.conf is not currently present on your system.
118: This is either due to
119: * you are missing the Apache software package,
120: * you have a newer version of Apache that does not
121: ordinarily install an access.conf
122: * configuration files are installed in a directory location
123: different than for <TARGET />
124: For backwards compatibility,
125: <TARGET /> is being generated.
126: END
127: }
128: my $flag=0;
129: open IN, "<<TARGET />";
130: while (<IN>) { if (/^\s*Include\s+conf\/loncapa_apache.conf/)
131: { $flag=1; } }
132: close IN;
133: unless ($flag==1) {
134: open OUT,">><TARGET />";
135: print OUT 'Include conf/loncapa_apache.conf'."\n";
136: close OUT;
137: $flag=0;
138: open IN, "<<TARGET />";
139: while (<IN>) { if (/^\s*Include\s+conf\/loncapa.conf/) { $flag=1; } }
140: close IN;
141: unless ($flag==1) {
142: open OUT,">><TARGET />";
143: print OUT 'Include conf/loncapa.conf'."\n";
144: close OUT;
145: }
146: </perlscript>
147: </file>
148: <file>
149: <target dist='default'>/etc/httpd/conf/srm.conf</target>
150: <note>This may or may not exist on a system depending on the version of
151: Apache</note>
152: <dependencies dist='default'>
153: /etc/httpd/conf/srm.conf
154: </dependencies>
155: <perlscript mode='fg'>
156: unless (-e "<TARGET />") {
157: print <<END;
158: WARNING! srm.conf is not currently present on your system.
159: This is either due to
160: * you are missing the Apache software package,
161: * you have a newer version of Apache that does not
162: ordinarily install an srm.conf
163: * configuration files are installed in a directory location
164: different than for <TARGET />
165: For backwards compatibility,
166: <TARGET /> is being generated.
167: END
168: }
169: my $flag=0;
170: open IN, "<<TARGET />";
171: while (<IN>) { if (/^\s*Include\s+conf\/loncapa_apache.conf/)
172: { $flag=1; } }
173: close IN;
174: unless ($flag==1) {
175: open OUT,">><TARGET />";
176: print OUT 'Include conf/loncapa_apache.conf'."\n";
177: close OUT;
178: $flag=0;
179: open IN, "<<TARGET />";
180: while (<IN>) { if (/^\s*Include\s+conf\/loncapa.conf/) { $flag=1; } }
181: close IN;
182: unless ($flag==1) {
183: open OUT,">><TARGET />";
184: print OUT 'Include conf/loncapa.conf'."\n";
185: close OUT;
186: }
187: </perlscript>
188: </file>
189: </files>
190: </piml>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>