Annotation of doc/otherfiles/perl_modules.txt, revision 1.11
1.1 harris41 1: LON-CAPA perl modules
2: Scott Harrison
3: May 28, 2001
1.4 harris41 4: October 4, 2001
1.7 harris41 5: October 20, 2001
1.1 harris41 6:
7: Beginning to
8: index the perl modules
9: used in constructing
10: LON-CAPA-systemperl
11:
1.4 harris41 12: You can run CVS:loncom/build/system_dependencies/make perltest
13: to see if you have all the perl modules you need.
14:
15: Not ordinarily on a 6.2 or 7.1 system
16:
1.8 harris41 17: ----------------------------------------------- Digest
18: ***NEED TO HAVE DIGEST::MD5, etc IN HERE***
19:
1.7 harris41 20: ----------------------------------------------- Math-FFT
21: http://www.linuxjar.com/CPAN/authors/id/R/RK/RKOBES/Math-FFT-0.25.tar.gz
22: Randy Kobes [randy@theoryx5.uwinnipeg.ca]
23:
24: The Math::FFT module provides an interface to various
25: Fast Fourier Transform (FFT) routines of the C routine of fft4g.c,
26: available at http://momonga.t.u-tokyo.ac.jp/~ooura/fft.html.
27: The one-dimensional data sets, of size 2^n, are assumed
28: to be sampled at a constant rate.
29:
30:
1.6 harris41 31: ----------------------------------------------- GDTextUtil
32: http://www.cpan.org/authors/id/MVERB/GDTextUtil-0.80.tar.gz
33: This are Text utilities for use with the GD drawing package.
34:
35: ----------------------------------------------- GDGraph3d
36: http://www.cpan.org/authors/id/W/WA/WADG/GDGraph3d-0.56.tar.gz
37: provides 3D graphs for the GD::Graph module by Martien Verbruggen
38: AUTHOR
39: Jeremy Wadsack for Wadsack-Allen Digital Group.
40: <dgsupport@wadsack-allen.com>
41:
42: ----------------------------------------------- GDGraph
43: http://www.cpan.org/authors/id/MVERB/GDGraph-1.33.tar.gz
44: a package to generate charts
45: AUTHOR
46:
47: Martien Verbruggen
48: mgjv@tradingpost.com.au
49:
50: FIRST PNG PORT as Chart::PNGgraph
51:
52: Steve Bonds
53: sbonds@agora.rdrop.com
54:
1.2 harris41 55: ----------------------------------------------- Math-Cephes
1.1 harris41 56: http://www.cpan.org/authors/id/R/RK/RKOBES/Math-Cephes-0.25.tar.gz
1.2 harris41 57: The Math::Cephes module provides a perl interface to over
1.4 harris41 58: 150 functions of the cephes math library of Stephen Moshier
59: [moshier@mediaone.net].
60:
61: Perl interface by Randy Kobes [randy@theoryx5.uwinnipeg.ca].
1.2 harris41 62:
63: Note, bit arithmetic makes this build architecture dependent
64: for only IBM-PC-like computers.
65:
66: perl Makefile.PL
67: make
68: make test
69: make install
70:
71: files
72:
1.3 harris41 73: ----------------------------------------------- Math-Random
1.10 harris41 74: http://www.cpan.org/authors/id/G/GR/GROMMEL/Math-Random-0.64.tar.gz
1.1 harris41 75:
1.4 harris41 76: Written by Geoffrey Rommel, John Venier and Barry W. Brown.
77: We use this for the encoded randomizing functions needed for LON-CAPA homework
78: handling (translation from previous CAPA functions).
79:
80: John Venier [venier@odin.mdacc.tmc.edu]
81:
82: perl Makefile.PL
83: make
84: make test
85: make install
86:
87: ----------------------------------------------- GD-Barcode
88: http://www.cpan.org/modules/by-module/GD/GD-Barcode-1.13.tar.gz
1.5 harris41 89: Kawai Takanori [GCD00051@nifty.ne.jp]
1.4 harris41 90: GD/Barcode.pm
91: GD/Barcode/COOP2of5.pm
92: GD/Barcode/Code39.pm
93: GD/Barcode/EAN13.pm
94: GD/Barcode/EAN8.pm
95: GD/Barcode/IATA2of5.pm
96: GD/Barcode/ITF.pm
97: GD/Barcode/Industrial2of5.pm
98: GD/Barcode/Matrix2of5.pm
99: GD/Barcode/NW7.pm
100: GD/Barcode/UPCA.pm
101: GD/Barcode/UPCE.pm
102: perl Makefile.PL
103: make
104: make test
105: (as root)
106: make install
107:
108: ----------------------------------------------- GD
109: http://www.cpan.org/modules/by-module/GD/GD-1.33.tar.gz
110: GD.pm
1.5 harris41 111: Lincoln D. Stein [lstein@cshl.org]
1.4 harris41 112:
113: Note: need gd-devel rpm for this
114: and libpng-devel
115: and freetype-devel
1.7 harris41 116: and X11-devel
117: #no this command: ln -s /usr/X11R6/lib/libX11.so.6 /usr/X11R6/lib/libX11.so
118: #no this command: ln -s /usr/X11R6/lib/libXpm.so.4 /usr/X11R6/lib/libXpm.so
1.3 harris41 119:
120: perl Makefile.PL
1.7 harris41 121: Please choose the features that match how libgd was built:
122: Build JPEG support? [y]
123: Build FreeType support? [y]
124: Build XPM support? [y]
125:
1.3 harris41 126: make
127: make test
1.4 harris41 128: (as root)
1.3 harris41 129: make install
1.4 harris41 130: (may also possibly need
131: http://www.boutell.com/gd/http/gd-1.8.4.tar.gz, see doc/barcode.html)
132:
133: ----------------------------------------------- Algorithm-Diff
134: http://www.cpan.org/authors/id/N/NE/NEDKONZ/Algorithm-Diff-1.11a.tar.gz
135: Algorithm/Diff.pm
136: Algorithm/Diffold.pm
137:
138: perl Makefile.PL
139: make
140: make test
141: (as root)
142: make install
143:
144: ---------------------------------------------- libwww-perl
145: http://www.cpan.org/authors/id/G/GA/GAAS/libwww-perl-5.53.tar.gz
146: HTTP/Cookies.pm
147: HTTP/Daemon.pm
148: HTTP/Date.pm
149: HTTP/Headers.pm
150: HTTP/Headers/Auth.pm
151: HTTP/Headers/ETag.pm
152: HTTP/Headers/Util.pm
153: HTTP/Message.pm
154: HTTP/Negotiate.pm
155: HTTP/Request.pm
156: HTTP/Request/Common.pm
157: HTTP/Response.pm
158: HTTP/Status.pm
159: BUNDLE/LWP.pm
160: File/Listing.pm
161: HTML/Form.pm
162: LWP.pm
163: LWP/Authen/Basic.pm
164: LWP/Authen/Digest.pm
165: LWP/Debug.pm
166: LWP/MediaTypes.pm
167: LWP/MemberMixin.pm
168: LWP/Protocol.pm
169: LWP/Protocol/data.pm
170: LWP/Protocol/file.pm
171: LWP/Protocol/ftp.pm
172: LWP/Protocol/gopher.pm
173: LWP/Protocol/http.pm
174: LWP/Protocol/https.pm
175: LWP/Protocol/mailto.pm
176: LWP/Protocol/nntp.pm
177: LWP/RobotUA.pm
178: LWP/Simple.pm
179: LWP/UserAgent.pm
180:
181: (needs URI, HTML::Parser, MIME::Base64, Net::FTP)
182:
183: Gisle Aas [gisle@aas.no]
184:
185: perl Makefile.PL
186: make
187: make test
188: (as root)
189: make install
190:
191: ---------------------------------------------- HTML-Tagset
192: http://www.cpan.org/authors/id/S/SB/SBURKE/HTML-Tagset-3.03.tar.gz
193: Sean M. Burke [sburke@cpan.org]
194: HTML/Tagset.pm
195:
196: ---------------------------------------------- HTML-Tree
197: http://www.cpan.org/authors/id/S/SB/SBURKE/HTML-Tree-3.11.tar.gz
198: Gisle Aas [gisle@aas.no]
199: Sean M. Burke [sburke@cpan.org]
200: HTML/Tree.pm
201: HTML/TreeBuilder.pm
202: HTML/AsSubs.pm
203: HTML/Element.pm
204: HTML/Element/traverse.pm
205: HTML/Parse.pm
206:
207: ---------------------------------------------- HTML-Parser
208: http://www.cpan.org/authors/id/G/GA/GAAS/HTML-Parser-3.25.tar.gz
209: Gisle Aas [gisle@aas.no]
210: HTML/Parser.pm 1
211: HTML/TokeParser.pm 1
212:
213: ---------------------------------------------- IO-stringy
214: http://www.cpan.org/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz
1.11 ! harris41 215: (needed by MIME-tools)
1.4 harris41 216:
217: ---------------------------------------------- MIME-Base64
218: http://www.cpan.org/authors/id/G/GA/GAAS/MIME-Base64-2.12.tar.gz
219:
220:
221: ---------------------------------------------- MailTools
222: http://www.cpan.org/authors/id/G/GB/GBARR/MailTools-1.15.tar.gz
223:
224: ---------------------------------------------- MIME-tools
225: http://www.cpan.org/authors/id/E/ER/ERYQ/MIME-tools-BETA-5.503.tar.gz
226: Eryq, (eryq@zeegee.com)
227: MIME/Body.pm
228: MIME/Decoder.pm
229: MIME/Decoder/Base64.pm
230: MIME/Decoder/Binary.pm
231: MIME/Decoder/Gzip64.pm
232: MIME/Decoder/NBit.pm
233: MIME/Decoder/QuotedPrint.pm
234: MIME/Decoder/UU.pm
235: MIME/Entity.pm
236: MIME/Field/ConTraEnc.pm
237: MIME/Field/ContDisp.pm
238: MIME/Field/ContType.pm
239: MIME/Field/ParamVal.pm
240: MIME/Head.pm
241: MIME/Parser.pm
242: MIME/Parser/Filer.pm
243: MIME/Parser/Reader.pm
244: MIME/Parser/Results.pm
245: MIME/Tools.pm
246: MIME/Words.pm
247:
248: ----------------------------------------------- libnet
249: http://www.cpan.org/authors/id/G/GB/GBARR/libnet-1.0704.tar.gz
250: http://www.cpan.org/authors/id/GBARR/Net-PH-2.21.tar.gz
251: http://www.cpan.org/authors/id/GBARR/Net-SNPP-1.12.tar.gz
252:
253: Graham Barr [gbarr@pobox.com]
254: Net/Cmd.pm
255: Net/Config.pm
256: Net/Domain.pm
257: Net/DummyInetd.pm
258: Net/FTP.pm
259: Net/FTP/A.pm
260: Net/FTP/E.pm
261: Net/FTP/I.pm
262: Net/FTP/L.pm
263: Net/FTP/dataconn.pm
264: Net/NNTP.pm
265: Net/Netrc.pm
266: Net/PH.pm
267: Net/POP3.pm
268: Net/SMTP.pm
269: Net/SNPP.pm
270: Net/Time.pm
271:
272: ---------------------------------------------- Text-Query-...
273: http://www.cpan.org/authors/id/E/EB/EBOHLMAN/Text-Query-Advanced-0.05.tar.gz
274: http://www.cpan.org/authors/id/E/EB/EBOHLMAN/Text-Query-0.07.tar.gz
275: http://www.cpan.org/authors/id/E/EB/EBOHLMAN/Text-Query-Simple-0.03.tar.gz
276: Eric Bohlman [ebohlman@netcom.com]
277: Loic Dachary [loic@senga.org]
278: Text/Query.pm
279: Text/Query/Advanced.pm
280: Text/Query/Build.pm
281: Text/Query/BuildAdvancedString.pm
282: Text/Query/BuildSimpleString.pm
283: Text/Query/Optimize.pm
284: Text/Query/Parse.pm
285: Text/Query/ParseAdvanced.pm
286: Text/Query/ParseSimple.pm
287: Text/Query/Simple.pm
288: Text/Query/Solve.pm
289: Text/Query/SolveAdvancedString.pm
290: Text/Query/SolveSimpleString.pm
291:
292: ---------------------------------------------- Krb4
293: http://www.cpan.org/authors/id/J/JH/JHORWITZ/Krb4-1.1.tar.gz
294: Need kerberos 4 from http://sunsite.ualberta.ca/pub/Mirror/kth-krb/src/
295: [root@kirk krb4-0.10.1]# diff configure.in configure.in~
296: 27c27
297: < AC_PREFIX_DEFAULT(/usr/local/krb4)
298: ---
299: > AC_PREFIX_DEFAULT(/usr/athena)
300: /usr/local/krb4 is what you want on this line!!!!
301: autoconf configure.in > configure
302:
303: autoconf must be 2.52 so compile this from source too
304: also install flex to configure krb4
305: and install yacc
306: Jeff Horwitz [jeff@smashing.org]
307: Authen/Krb4.pm
308:
309: ---------------------------------------------- Crypt-DES/IDEA
1.10 harris41 310: http://www.cpan.org/authors/id/D/DP/DPARIS/Crypt-DES-2.03.tar.gz
1.4 harris41 311: http://www.cpan.org/authors/id/D/DP/DPARIS/Crypt-IDEA-1.01.tar.gz
312: Dave Paris [amused@pobox.com]
313: Crypt/DES.pm
314: Crypt/IDEA.pm
315:
316: ---------------------------------------------- DBI
317: http://www.cpan.org/authors/id/T/TI/TIMB/DBI-1.20.tar.gz
318: Tim Bunce [Tim.Bunce@pobox.com]
319: DBD/ADO.pm
320: DBD/ExampleP.pm
321: DBD/Multiplex.pm
322: DBD/NullP.pm
323: DBD/Proxy.pm
324: DBD/Sponge.pm
325: DBD/mysql.pm
326: DBI.pm
327: DBI/DBD.pm
328: DBI/FAQ.pm
329: DBI/Format.pm
330: DBI/ProxyServer.pm
331: DBI/Shell.pm
332: DBI/W32ODBC.pm
333:
334: ---------------------------------------------- Safe-Hole
335: http://www.cpan.org/authors/id/S/SE/SEYN/Safe-Hole-0.08.tar.gz
336: Sey Nakajima [sey@jkc.co.jp]
337:
338: ---------------------------------------------- Msql-Mysql-modules
339: http://www.cpan.org/authors/id/J/JW/JWIED/Msql-Mysql-modules-1.2216.tar.gz
340: Jochen Wiedmann [joe@ispsoft.de]
341:
342: [root@fenchurch Msql-Mysql-modules-1.2215]# perl Makefile.PL
343: Which drivers do you want to install?
344:
345: 1) MySQL only
346: 2) mSQL only (either of mSQL 1 or mSQL 2)
347: 3) MySQL and mSQL (either of mSQL 1 or mSQL 2)
348:
349: 4) mSQL 1 and mSQL 2
350: 5) MySQL, mSQL 1 and mSQL 2
351:
352: Enter the appropriate number: [3] 1
353:
354: Do you want to install the MysqlPerl emulation? You might keep your old
355: Mysql module (to be distinguished from DBD::mysql!) if you are concerned
356: about compatibility to existing applications! [y] n
357: Where is your MySQL installed? Please tell me the directory that
358: contains the subdir 'include'. [/usr/local/mysql]
359: Which database should I use for testing the MySQL drivers? [test]
360: On which host is database test running (hostname, ip address
361: or host:port) [localhost]
362: User name for connecting to database test? [undef]
363: Password for connecting to database test? [undef]
364: [root@fenchurch Msql-Mysql-modules-1.2215]# make
365: [root@fenchurch Msql-Mysql-modules-1.2215]# make test
366: make[1]: Entering directory `/home/user/Msql-Mysql-modules-1.2215/mysql'
367: make[1]: Leaving directory `/home/user/Msql-Mysql-modules-1.2215/mysql'
368: make[1]: Entering directory `/home/user/Msql-Mysql-modules-1.2215/mysql'
369: PERL_DL_NONLAZY=1 /usr/bin/perl -I../blib/arch -I../blib/lib -I/usr/lib/perl5/5.00503/i386-linux -I/usr/lib/perl5/5.00503 -e 'use Test::Harness qw(&runtests $verbose); $verbose=0; runtests @ARGV;' t/*.t
370:
1.7 harris41 371: To test, make sure that root does not have a password
372: in the mysql::user table. (You should reset the password
373: after this with mysqladmin -u root password 'new-password').
374:
375: ---------------------------------------------- mod_perl
1.5 harris41 376: http://www.cpan.org/authors/id/DOUGM/mod_perl-1.26.tar.gz
1.4 harris41 377:
378: Just 6.2 needs these extras
379:
380: ---------------------------------------------- IO
381: http://www.cpan.org/authors/id/G/GB/GBARR/IO-1.20.tar.gz
382: Graham Barr [gbarr@pobox.com]
383: IO/Dir.pm
384: IO/Poll.pm
385: IO/Socket/INET.pm
386: IO/Socket/UNIX.pm
387:
1.9 harris41 388:
389: **** IMPORTANT NOTE ****
390: For things to work well for perl 5.005 (redhat 6.2)
391: older versions of
392: /usr/lib/perl5/5.00503/i386-linux/IO.pm
393: /usr/lib/perl5/5.00503/i386-linux/IO/File.pm
394: /usr/lib/perl5/5.00503/i386-linux/IO/Handle.pm
395: /usr/lib/perl5/5.00503/i386-linux/IO/Pipe.pm
396: /usr/lib/perl5/5.00503/i386-linux/IO/Seekable.pm
397: /usr/lib/perl5/5.00503/i386-linux/IO/Select.pm
398: /usr/lib/perl5/5.00503/i386-linux/IO/Socket.pm
399: /usr/lib/perl5/5.00503/i386-linux/auto/IO/IO.so
400: are needed (can rewrite with rpm -Uvh perl after
401: installing LON-CAPA-systemperl).
402:
1.4 harris41 403: perl Makefile.PL
404: make
405: make test
406: (as root)
407: make install
408:
1.1 harris41 409:
410: and others...
411: (document incomplete)
412:
1.3 harris41 413: cat systemperl_files.txt | perl make_rpm.pl systemperl 3.1 '' '' SYSTEMPERL
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>