Annotation of doc/otherfiles/perl_modules.txt, revision 1.15
1.1 harris41 1: LON-CAPA perl modules
2: May 28, 2001
1.4 harris41 3: October 4, 2001
1.7 harris41 4: October 20, 2001
1.1 harris41 5:
6: Beginning to
7: index the perl modules
8: used in constructing
9: LON-CAPA-systemperl
10:
1.4 harris41 11: You can run CVS:loncom/build/system_dependencies/make perltest
12: to see if you have all the perl modules you need.
13:
14: Not ordinarily on a 6.2 or 7.1 system
15:
1.8 harris41 16: ----------------------------------------------- Digest
17: ***NEED TO HAVE DIGEST::MD5, etc IN HERE***
1.14 harris41 18: http://www.cpan.org/authors/id/GAAS/Digest-MD5-2.20.tar.gz
1.8 harris41 19:
1.7 harris41 20: ----------------------------------------------- Math-FFT
1.14 harris41 21: http://www.cpan.org/authors/id/R/RK/RKOBES/Math-FFT-0.25.tar.gz
1.7 harris41 22: Randy Kobes [randy@theoryx5.uwinnipeg.ca]
23:
24: The Math::FFT module provides an interface to various
25: Fast Fourier Transform (FFT) routines of the C routine of fft4g.c,
26: available at http://momonga.t.u-tokyo.ac.jp/~ooura/fft.html.
27: The one-dimensional data sets, of size 2^n, are assumed
28: to be sampled at a constant rate.
29:
30:
1.6 harris41 31: ----------------------------------------------- GDTextUtil
32: http://www.cpan.org/authors/id/MVERB/GDTextUtil-0.80.tar.gz
33: This are Text utilities for use with the GD drawing package.
34:
35: ----------------------------------------------- GDGraph3d
36: http://www.cpan.org/authors/id/W/WA/WADG/GDGraph3d-0.56.tar.gz
37: provides 3D graphs for the GD::Graph module by Martien Verbruggen
38: AUTHOR
39: Jeremy Wadsack for Wadsack-Allen Digital Group.
40: <dgsupport@wadsack-allen.com>
41:
42: ----------------------------------------------- GDGraph
43: http://www.cpan.org/authors/id/MVERB/GDGraph-1.33.tar.gz
44: a package to generate charts
45: AUTHOR
46:
47: Martien Verbruggen
48: mgjv@tradingpost.com.au
49:
50: FIRST PNG PORT as Chart::PNGgraph
51:
52: Steve Bonds
53: sbonds@agora.rdrop.com
54:
1.2 harris41 55: ----------------------------------------------- Math-Cephes
1.1 harris41 56: http://www.cpan.org/authors/id/R/RK/RKOBES/Math-Cephes-0.25.tar.gz
1.2 harris41 57: The Math::Cephes module provides a perl interface to over
1.4 harris41 58: 150 functions of the cephes math library of Stephen Moshier
59: [moshier@mediaone.net].
60:
61: Perl interface by Randy Kobes [randy@theoryx5.uwinnipeg.ca].
1.2 harris41 62:
63: Note, bit arithmetic makes this build architecture dependent
64: for only IBM-PC-like computers.
65:
66: perl Makefile.PL
67: make
68: make test
69: make install
70:
71: files
72:
1.3 harris41 73: ----------------------------------------------- Math-Random
1.10 harris41 74: http://www.cpan.org/authors/id/G/GR/GROMMEL/Math-Random-0.64.tar.gz
1.1 harris41 75:
1.4 harris41 76: Written by Geoffrey Rommel, John Venier and Barry W. Brown.
77: We use this for the encoded randomizing functions needed for LON-CAPA homework
78: handling (translation from previous CAPA functions).
79:
80: John Venier [venier@odin.mdacc.tmc.edu]
81:
82: perl Makefile.PL
83: make
84: make test
85: make install
86:
87: ----------------------------------------------- GD-Barcode
88: http://www.cpan.org/modules/by-module/GD/GD-Barcode-1.13.tar.gz
1.5 harris41 89: Kawai Takanori [GCD00051@nifty.ne.jp]
1.4 harris41 90: GD/Barcode.pm
91: GD/Barcode/COOP2of5.pm
92: GD/Barcode/Code39.pm
93: GD/Barcode/EAN13.pm
94: GD/Barcode/EAN8.pm
95: GD/Barcode/IATA2of5.pm
96: GD/Barcode/ITF.pm
97: GD/Barcode/Industrial2of5.pm
98: GD/Barcode/Matrix2of5.pm
99: GD/Barcode/NW7.pm
100: GD/Barcode/UPCA.pm
101: GD/Barcode/UPCE.pm
102: perl Makefile.PL
103: make
104: make test
105: (as root)
106: make install
107:
108: ----------------------------------------------- GD
109: http://www.cpan.org/modules/by-module/GD/GD-1.33.tar.gz
110: GD.pm
1.5 harris41 111: Lincoln D. Stein [lstein@cshl.org]
1.4 harris41 112:
113: Note: need gd-devel rpm for this
114: and libpng-devel
115: and freetype-devel
1.7 harris41 116: and X11-devel
117: #no this command: ln -s /usr/X11R6/lib/libX11.so.6 /usr/X11R6/lib/libX11.so
118: #no this command: ln -s /usr/X11R6/lib/libXpm.so.4 /usr/X11R6/lib/libXpm.so
1.3 harris41 119:
120: perl Makefile.PL
1.7 harris41 121: Please choose the features that match how libgd was built:
122: Build JPEG support? [y]
123: Build FreeType support? [y]
124: Build XPM support? [y]
125:
1.3 harris41 126: make
127: make test
1.4 harris41 128: (as root)
1.3 harris41 129: make install
1.4 harris41 130: (may also possibly need
131: http://www.boutell.com/gd/http/gd-1.8.4.tar.gz, see doc/barcode.html)
132:
133: ----------------------------------------------- Algorithm-Diff
134: http://www.cpan.org/authors/id/N/NE/NEDKONZ/Algorithm-Diff-1.11a.tar.gz
135: Algorithm/Diff.pm
136: Algorithm/Diffold.pm
137:
138: perl Makefile.PL
139: make
140: make test
141: (as root)
142: make install
143:
144: ---------------------------------------------- libwww-perl
145: http://www.cpan.org/authors/id/G/GA/GAAS/libwww-perl-5.53.tar.gz
146: HTTP/Cookies.pm
147: HTTP/Daemon.pm
148: HTTP/Date.pm
149: HTTP/Headers.pm
150: HTTP/Headers/Auth.pm
151: HTTP/Headers/ETag.pm
152: HTTP/Headers/Util.pm
153: HTTP/Message.pm
154: HTTP/Negotiate.pm
155: HTTP/Request.pm
156: HTTP/Request/Common.pm
157: HTTP/Response.pm
158: HTTP/Status.pm
159: BUNDLE/LWP.pm
160: File/Listing.pm
161: HTML/Form.pm
162: LWP.pm
163: LWP/Authen/Basic.pm
164: LWP/Authen/Digest.pm
165: LWP/Debug.pm
166: LWP/MediaTypes.pm
167: LWP/MemberMixin.pm
168: LWP/Protocol.pm
169: LWP/Protocol/data.pm
170: LWP/Protocol/file.pm
171: LWP/Protocol/ftp.pm
172: LWP/Protocol/gopher.pm
173: LWP/Protocol/http.pm
174: LWP/Protocol/https.pm
175: LWP/Protocol/mailto.pm
176: LWP/Protocol/nntp.pm
177: LWP/RobotUA.pm
178: LWP/Simple.pm
179: LWP/UserAgent.pm
180:
181: (needs URI, HTML::Parser, MIME::Base64, Net::FTP)
182:
183: Gisle Aas [gisle@aas.no]
184:
185: perl Makefile.PL
186: make
187: make test
188: (as root)
189: make install
190:
191: ---------------------------------------------- HTML-Tagset
192: http://www.cpan.org/authors/id/S/SB/SBURKE/HTML-Tagset-3.03.tar.gz
193: Sean M. Burke [sburke@cpan.org]
194: HTML/Tagset.pm
195:
196: ---------------------------------------------- HTML-Tree
197: http://www.cpan.org/authors/id/S/SB/SBURKE/HTML-Tree-3.11.tar.gz
198: Gisle Aas [gisle@aas.no]
199: Sean M. Burke [sburke@cpan.org]
200: HTML/Tree.pm
201: HTML/TreeBuilder.pm
202: HTML/AsSubs.pm
203: HTML/Element.pm
204: HTML/Element/traverse.pm
205: HTML/Parse.pm
206:
207: ---------------------------------------------- HTML-Parser
1.13 albertel 208: http://www.cpan.org/authors/id/G/GA/GAAS/HTML-Parser-3.26.tar.gz
1.4 harris41 209: Gisle Aas [gisle@aas.no]
210: HTML/Parser.pm 1
211: HTML/TokeParser.pm 1
212:
1.13 albertel 213: Need this patches applied:
1.12 albertel 214:
1.13 albertel 215: diff -u HTML-Parser-3.26/hparser.c HTML-Parser-3.26.simpleslashfix/hparser.c
216: --- HTML-Parser-3.26/hparser.c Sun Mar 17 15:07:57 2002
217: +++ HTML-Parser-3.26.simpleslashfix/hparser.c Fri Mar 22 13:23:17 2002
218: @@ -1101,14 +1101,21 @@
1.12 albertel 219: hctype_t tag_name_first, tag_name_char;
220: hctype_t attr_name_first, attr_name_char;
221:
222: - if (p_state->strict_names || p_state->xml_mode) {
223: + if (p_state->strict_names) {
224: tag_name_first = attr_name_first = HCTYPE_NAME_FIRST;
225: tag_name_char = attr_name_char = HCTYPE_NAME_CHAR;
226: }
227: else {
228: - tag_name_first = tag_name_char = HCTYPE_NOT_SPACE_GT;
229: - attr_name_first = HCTYPE_NOT_SPACE_GT;
230: - attr_name_char = HCTYPE_NOT_SPACE_EQ_GT;
1.13 albertel 231: + if (p_state->xml_mode) {
232: + tag_name_first = tag_name_char = HCTYPE_NOT_SPACE_SLASH_GT;
233: + attr_name_first = HCTYPE_NOT_SPACE_SLASH_GT;
234: + attr_name_char = HCTYPE_NOT_SPACE_EQ_GT;
235: + }
236: + else {
237: + tag_name_first = tag_name_char = HCTYPE_NOT_SPACE_GT;
238: + attr_name_first = HCTYPE_NOT_SPACE_GT;
239: + attr_name_char = HCTYPE_NOT_SPACE_EQ_GT;
240: + }
1.12 albertel 241: }
242:
243: s += 2;
1.13 albertel 244: @@ -1165,8 +1172,11 @@
1.12 albertel 245: else {
246: char *word_start = s;
247: while (s < end && isHNOT_SPACE_GT(*s)) {
248: - if (p_state->xml_mode && *s == '/')
249: - break;
1.13 albertel 250: + if (p_state->xml_mode && *s == '/') {
251: + /* look ahead to see if the tag ends */
252: + if ((s+1)==end || *(s+1)=='>')
253: + break;
254: + }
1.12 albertel 255: s++;
256: }
257: if (s == end)
258:
1.4 harris41 259: ---------------------------------------------- IO-stringy
260: http://www.cpan.org/authors/id/E/ER/ERYQ/IO-stringy-2.108.tar.gz
1.11 harris41 261: (needed by MIME-tools)
1.4 harris41 262:
263: ---------------------------------------------- MIME-Base64
264: http://www.cpan.org/authors/id/G/GA/GAAS/MIME-Base64-2.12.tar.gz
265:
266:
267: ---------------------------------------------- MailTools
268: http://www.cpan.org/authors/id/G/GB/GBARR/MailTools-1.15.tar.gz
269:
270: ---------------------------------------------- MIME-tools
271: http://www.cpan.org/authors/id/E/ER/ERYQ/MIME-tools-BETA-5.503.tar.gz
272: Eryq, (eryq@zeegee.com)
273: MIME/Body.pm
274: MIME/Decoder.pm
275: MIME/Decoder/Base64.pm
276: MIME/Decoder/Binary.pm
277: MIME/Decoder/Gzip64.pm
278: MIME/Decoder/NBit.pm
279: MIME/Decoder/QuotedPrint.pm
280: MIME/Decoder/UU.pm
281: MIME/Entity.pm
282: MIME/Field/ConTraEnc.pm
283: MIME/Field/ContDisp.pm
284: MIME/Field/ContType.pm
285: MIME/Field/ParamVal.pm
286: MIME/Head.pm
287: MIME/Parser.pm
288: MIME/Parser/Filer.pm
289: MIME/Parser/Reader.pm
290: MIME/Parser/Results.pm
291: MIME/Tools.pm
292: MIME/Words.pm
293:
294: ----------------------------------------------- libnet
295: http://www.cpan.org/authors/id/G/GB/GBARR/libnet-1.0704.tar.gz
296: http://www.cpan.org/authors/id/GBARR/Net-PH-2.21.tar.gz
297: http://www.cpan.org/authors/id/GBARR/Net-SNPP-1.12.tar.gz
298:
299: Graham Barr [gbarr@pobox.com]
300: Net/Cmd.pm
301: Net/Config.pm
302: Net/Domain.pm
303: Net/DummyInetd.pm
304: Net/FTP.pm
305: Net/FTP/A.pm
306: Net/FTP/E.pm
307: Net/FTP/I.pm
308: Net/FTP/L.pm
309: Net/FTP/dataconn.pm
310: Net/NNTP.pm
311: Net/Netrc.pm
312: Net/PH.pm
313: Net/POP3.pm
314: Net/SMTP.pm
315: Net/SNPP.pm
316: Net/Time.pm
317:
318: ---------------------------------------------- Text-Query-...
319: http://www.cpan.org/authors/id/E/EB/EBOHLMAN/Text-Query-Advanced-0.05.tar.gz
320: http://www.cpan.org/authors/id/E/EB/EBOHLMAN/Text-Query-0.07.tar.gz
321: http://www.cpan.org/authors/id/E/EB/EBOHLMAN/Text-Query-Simple-0.03.tar.gz
322: Eric Bohlman [ebohlman@netcom.com]
323: Loic Dachary [loic@senga.org]
324: Text/Query.pm
325: Text/Query/Advanced.pm
326: Text/Query/Build.pm
327: Text/Query/BuildAdvancedString.pm
328: Text/Query/BuildSimpleString.pm
329: Text/Query/Optimize.pm
330: Text/Query/Parse.pm
331: Text/Query/ParseAdvanced.pm
332: Text/Query/ParseSimple.pm
333: Text/Query/Simple.pm
334: Text/Query/Solve.pm
335: Text/Query/SolveAdvancedString.pm
336: Text/Query/SolveSimpleString.pm
337:
338: ---------------------------------------------- Krb4
339: http://www.cpan.org/authors/id/J/JH/JHORWITZ/Krb4-1.1.tar.gz
340: Need kerberos 4 from http://sunsite.ualberta.ca/pub/Mirror/kth-krb/src/
341: [root@kirk krb4-0.10.1]# diff configure.in configure.in~
342: 27c27
343: < AC_PREFIX_DEFAULT(/usr/local/krb4)
344: ---
345: > AC_PREFIX_DEFAULT(/usr/athena)
346: /usr/local/krb4 is what you want on this line!!!!
347: autoconf configure.in > configure
348:
349: autoconf must be 2.52 so compile this from source too
350: also install flex to configure krb4
351: and install yacc
352: Jeff Horwitz [jeff@smashing.org]
353: Authen/Krb4.pm
354:
355: ---------------------------------------------- Crypt-DES/IDEA
1.10 harris41 356: http://www.cpan.org/authors/id/D/DP/DPARIS/Crypt-DES-2.03.tar.gz
1.4 harris41 357: http://www.cpan.org/authors/id/D/DP/DPARIS/Crypt-IDEA-1.01.tar.gz
358: Dave Paris [amused@pobox.com]
359: Crypt/DES.pm
360: Crypt/IDEA.pm
361:
362: ---------------------------------------------- DBI
363: http://www.cpan.org/authors/id/T/TI/TIMB/DBI-1.20.tar.gz
364: Tim Bunce [Tim.Bunce@pobox.com]
365: DBD/ADO.pm
366: DBD/ExampleP.pm
367: DBD/Multiplex.pm
368: DBD/NullP.pm
369: DBD/Proxy.pm
370: DBD/Sponge.pm
371: DBD/mysql.pm
372: DBI.pm
373: DBI/DBD.pm
374: DBI/FAQ.pm
375: DBI/Format.pm
376: DBI/ProxyServer.pm
377: DBI/Shell.pm
378: DBI/W32ODBC.pm
379:
380: ---------------------------------------------- Safe-Hole
381: http://www.cpan.org/authors/id/S/SE/SEYN/Safe-Hole-0.08.tar.gz
382: Sey Nakajima [sey@jkc.co.jp]
383:
384: ---------------------------------------------- Msql-Mysql-modules
385: http://www.cpan.org/authors/id/J/JW/JWIED/Msql-Mysql-modules-1.2216.tar.gz
386: Jochen Wiedmann [joe@ispsoft.de]
387:
388: [root@fenchurch Msql-Mysql-modules-1.2215]# perl Makefile.PL
389: Which drivers do you want to install?
390:
391: 1) MySQL only
392: 2) mSQL only (either of mSQL 1 or mSQL 2)
393: 3) MySQL and mSQL (either of mSQL 1 or mSQL 2)
394:
395: 4) mSQL 1 and mSQL 2
396: 5) MySQL, mSQL 1 and mSQL 2
397:
398: Enter the appropriate number: [3] 1
399:
400: Do you want to install the MysqlPerl emulation? You might keep your old
401: Mysql module (to be distinguished from DBD::mysql!) if you are concerned
402: about compatibility to existing applications! [y] n
403: Where is your MySQL installed? Please tell me the directory that
404: contains the subdir 'include'. [/usr/local/mysql]
405: Which database should I use for testing the MySQL drivers? [test]
406: On which host is database test running (hostname, ip address
407: or host:port) [localhost]
408: User name for connecting to database test? [undef]
409: Password for connecting to database test? [undef]
410: [root@fenchurch Msql-Mysql-modules-1.2215]# make
411: [root@fenchurch Msql-Mysql-modules-1.2215]# make test
412: make[1]: Entering directory `/home/user/Msql-Mysql-modules-1.2215/mysql'
413: make[1]: Leaving directory `/home/user/Msql-Mysql-modules-1.2215/mysql'
414: make[1]: Entering directory `/home/user/Msql-Mysql-modules-1.2215/mysql'
415: PERL_DL_NONLAZY=1 /usr/bin/perl -I../blib/arch -I../blib/lib -I/usr/lib/perl5/5.00503/i386-linux -I/usr/lib/perl5/5.00503 -e 'use Test::Harness qw(&runtests $verbose); $verbose=0; runtests @ARGV;' t/*.t
416:
1.7 harris41 417: To test, make sure that root does not have a password
418: in the mysql::user table. (You should reset the password
419: after this with mysqladmin -u root password 'new-password').
420:
421: ---------------------------------------------- mod_perl
1.5 harris41 422: http://www.cpan.org/authors/id/DOUGM/mod_perl-1.26.tar.gz
1.4 harris41 423:
424: Just 6.2 needs these extras
425:
426: ---------------------------------------------- IO
427: http://www.cpan.org/authors/id/G/GB/GBARR/IO-1.20.tar.gz
428: Graham Barr [gbarr@pobox.com]
429: IO/Dir.pm
430: IO/Poll.pm
431: IO/Socket/INET.pm
432: IO/Socket/UNIX.pm
433:
1.9 harris41 434:
435: **** IMPORTANT NOTE ****
436: For things to work well for perl 5.005 (redhat 6.2)
437: older versions of
438: /usr/lib/perl5/5.00503/i386-linux/IO.pm
439: /usr/lib/perl5/5.00503/i386-linux/IO/File.pm
440: /usr/lib/perl5/5.00503/i386-linux/IO/Handle.pm
441: /usr/lib/perl5/5.00503/i386-linux/IO/Pipe.pm
442: /usr/lib/perl5/5.00503/i386-linux/IO/Seekable.pm
443: /usr/lib/perl5/5.00503/i386-linux/IO/Select.pm
444: /usr/lib/perl5/5.00503/i386-linux/IO/Socket.pm
445: /usr/lib/perl5/5.00503/i386-linux/auto/IO/IO.so
446: are needed (can rewrite with rpm -Uvh perl after
447: installing LON-CAPA-systemperl).
448:
1.4 harris41 449: perl Makefile.PL
450: make
451: make test
452: (as root)
453: make install
454:
1.1 harris41 455:
456: and others...
457: (document incomplete)
458:
1.3 harris41 459: cat systemperl_files.txt | perl make_rpm.pl systemperl 3.1 '' '' SYSTEMPERL
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to perl_modules.txt CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / otherfiles