Annotation of loncom/httpd.conf, revision 1.3
1.1 harris41 1: ##
2: ## httpd.conf -- Apache HTTP server configuration file
3: ##
4:
5: # This is the main server configuration file. See URL http://www.apache.org/
6: # for instructions.
7:
8: # Do NOT simply read the instructions in here without understanding
9: # what they do, if you are unsure consult the online docs. You have been
10: # warned.
11:
12: # Originally by Rob McCool
13:
14: # ServerType is either inetd, or standalone.
15:
16: ServerType standalone
17:
18: # If you are running from inetd, go to "ServerAdmin".
19:
20: # Port: The port the standalone listens to. For ports < 1023, you will
21: # need httpd to be run as root initially.
22:
23: Port 80
24:
25: # HostnameLookups: Log the names of clients or just their IP numbers
26: # e.g. www.apache.org (on) or 204.62.129.132 (off)
27: # The default is off because it'd be overall better for the net if people
28: # had to knowingly turn this feature on.
29:
30: HostnameLookups off
31:
32: # If you wish httpd to run as a different user or group, you must run
33: # httpd as root initially and it will switch.
34:
35: # User/Group: The name (or #number) of the user/group to run httpd as.
36: # On SCO (ODT 3) use User nouser and Group nogroup
37: # On HPUX you may not be able to use shared memory as nobody, and the
38: # suggested workaround is to create a user www and use that user.
39: # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
40: # when the value of (unsigned)Group is above 60000;
41: # don't use Group nobody on these systems!
42:
43: User www
44: Group users
45:
46: # ServerAdmin: Your address, where problems with the server should be
47: # e-mailed.
48:
49: ServerAdmin korte@lite.msu.edu
50:
51: # ServerRoot: The directory the server's config, error, and log files
52: # are kept in.
53: # NOTE! If you intend to place this on a NFS (or otherwise network)
54: # mounted filesystem then please read the LockFile documentation,
55: # you will save yourself a lot of trouble.
56:
57: ServerRoot /etc/httpd
58:
59: # BindAddress: You can support virtual hosts with this option. This option
60: # is used to tell the server which IP address to listen to. It can either
61: # contain "*", an IP address, or a fully qualified Internet domain name.
62: # See also the VirtualHost directive.
63:
64: #BindAddress *
65:
66: # ErrorLog: The location of the error log file. If this does not start
67: # with /, ServerRoot is prepended to it.
68:
69: ErrorLog logs/error_log
70:
71: # LogLevel: Control the number of messages logged to the error_log.
72: # Possible values include: debug, info, notice, warn, error, crit,
73: # alert, emerg.
74:
75: LogLevel warn
76:
77: # Dynamic Shared Object (DSO) Support
78: #
79: # To be able to use the functionality of a module which was built as a DSO you
80: # have to place corresponding `LoadModule' lines at this location so the
81: # directives contained in it are actually available _before_ they are used.
82: # Please read the file README.DSO in the Apache 1.3 distribution for more
83: # details about the DSO mechanism and run `httpd -l' for the list of already
84: # built-in (statically linked and thus always available) modules in your httpd
85: # binary.
86: #
87: # Example:
88: # LoadModule foo_module libexec/mod_foo.so
89: #
90: # Documentation for modules is in "/home/httpd/manual/mod" in HTML format.
91:
92: #LoadModule mmap_static_module modules/mod_mmap_static.so
93: LoadModule env_module modules/mod_env.so
94: LoadModule config_log_module modules/mod_log_config.so
95: LoadModule agent_log_module modules/mod_log_agent.so
96: LoadModule referer_log_module modules/mod_log_referer.so
97: #LoadModule mime_magic_module modules/mod_mime_magic.so
98: LoadModule mime_module modules/mod_mime.so
99: LoadModule negotiation_module modules/mod_negotiation.so
100: LoadModule status_module modules/mod_status.so
101: LoadModule info_module modules/mod_info.so
102: LoadModule includes_module modules/mod_include.so
103: LoadModule autoindex_module modules/mod_autoindex.so
104: LoadModule dir_module modules/mod_dir.so
105: LoadModule cgi_module modules/mod_cgi.so
106: LoadModule asis_module modules/mod_asis.so
107: LoadModule imap_module modules/mod_imap.so
108: LoadModule action_module modules/mod_actions.so
109: #LoadModule speling_module modules/mod_speling.so
110: LoadModule userdir_module modules/mod_userdir.so
111: LoadModule proxy_module modules/libproxy.so
112: LoadModule alias_module modules/mod_alias.so
113: LoadModule rewrite_module modules/mod_rewrite.so
114: LoadModule access_module modules/mod_access.so
115: LoadModule auth_module modules/mod_auth.so
116: LoadModule anon_auth_module modules/mod_auth_anon.so
117: #LoadModule dbm_auth_module modules/mod_auth_dbm.so
118: LoadModule db_auth_module modules/mod_auth_db.so
119: LoadModule digest_module modules/mod_digest.so
120: #LoadModule cern_meta_module modules/mod_cern_meta.so
121: LoadModule expires_module modules/mod_expires.so
122: LoadModule headers_module modules/mod_headers.so
123: LoadModule usertrack_module modules/mod_usertrack.so
124: #LoadModule example_module modules/mod_example.so
125: #LoadModule unique_id_module modules/mod_unique_id.so
126: LoadModule setenvif_module modules/mod_setenvif.so
127:
128: # Extra Modules
129: #LoadModule php_module modules/mod_php.so
130: #LoadModule php3_module modules/libphp3.so
131: LoadModule perl_module modules/libperl.so
132:
133: # Reconstruction of the complete module list from all available modules
134: # (static and shared ones) to achieve correct module execution order.
135: # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
136: ClearModuleList
137: #AddModule mod_mmap_static.c
138: AddModule mod_env.c
139: AddModule mod_log_config.c
140: AddModule mod_log_agent.c
141: AddModule mod_log_referer.c
142: #AddModule mod_mime_magic.c
143: AddModule mod_mime.c
144: AddModule mod_negotiation.c
145: AddModule mod_status.c
146: AddModule mod_info.c
147: AddModule mod_include.c
148: AddModule mod_autoindex.c
149: AddModule mod_dir.c
150: AddModule mod_cgi.c
151: AddModule mod_asis.c
152: AddModule mod_imap.c
153: AddModule mod_actions.c
154: #AddModule mod_speling.c
155: AddModule mod_userdir.c
156: AddModule mod_proxy.c
157: AddModule mod_alias.c
158: AddModule mod_rewrite.c
159: AddModule mod_access.c
160: AddModule mod_auth.c
161: AddModule mod_auth_anon.c
162: #AddModule mod_auth_dbm.c
163: AddModule mod_auth_db.c
164: AddModule mod_digest.c
165: #AddModule mod_cern_meta.c
166: AddModule mod_expires.c
167: AddModule mod_headers.c
168: AddModule mod_usertrack.c
169: #AddModule mod_example.c
170: #AddModule mod_unique_id.c
171: AddModule mod_so.c
172: AddModule mod_setenvif.c
173:
174: # Extra Modules
175: #AddModule mod_php.c
176: #AddModule mod_php3.c
177: AddModule mod_perl.c
178:
179:
180: # The following directives define some format nicknames for use with
181: # a CustomLog directive (see below).
182:
183: LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
184: LogFormat "%h %l %u %t \"%r\" %>s %b" common
185: LogFormat "%{Referer}i -> %U" referer
186: LogFormat "%{User-agent}i" agent
187:
188: # The location of the access logfile (Common Logfile Format).
189: # If this does not start with /, ServerRoot is prepended to it.
190:
191: CustomLog logs/access_log common
192:
193: # If you would like to have an agent and referer logfile uncomment the
194: # following directives.
195:
196: #CustomLog logs/referer_log referer
197: #CustomLog logs/agent_log agent
198:
199: # If you prefer a single logfile with access, agent and referer information
200: # (Combined Logfile Format) you can use the following directive.
201:
202: #CustomLog logs/access_log combined
203:
204: # PidFile: The file the server should log its pid to
205: PidFile /var/run/httpd.pid
206:
207: # ScoreBoardFile: File used to store internal server process information.
208: # Not all architectures require this. But if yours does (you'll know because
209: # this file is created when you run Apache) then you *must* ensure that
210: # no two invocations of Apache share the same scoreboard file.
211: ScoreBoardFile /var/run/httpd.scoreboard
212:
213: # The LockFile directive sets the path to the lockfile used when Apache
214: # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
215: # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
216: # its default value. The main reason for changing it is if the logs
217: # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
218: # DISK. The PID of the main server process is automatically appended to
219: # the filename.
220: #
221: #LockFile /var/lock/httpd.lock
222:
223: # ServerName allows you to set a host name which is sent back to clients for
224: # your server if it's different than the one the program would get (i.e. use
225: # "www" instead of the host's real name).
226: #
227: # Note: You cannot just invent host names and hope they work. The name you
228: # define here must be a valid DNS name for your host. If you don't understand
229: # this, ask your network administrator.
230:
231: #ServerName new.host.name
232:
233: # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
234: # Apache needs to construct a self-referencing URL (a url that refers back
235: # to the server the response is coming from) it will use ServerName and
236: # Port to form a "canonical" name. With this setting off, Apache will
237: # use the hostname:port that the client supplied, when possible. This
238: # also affects SERVER_NAME and SERVER_PORT in CGIs.
239: UseCanonicalName on
240:
241: # CacheNegotiatedDocs: By default, Apache sends Pragma: no-cache with each
242: # document that was negotiated on the basis of content. This asks proxy
243: # servers not to cache the document. Uncommenting the following line disables
244: # this behavior, and proxies will be allowed to cache the documents.
245:
246: #CacheNegotiatedDocs
247:
248: # Timeout: The number of seconds before receives and sends time out
249:
250: Timeout 300
251:
252: # KeepAlive: Whether or not to allow persistent connections (more than
253: # one request per connection). Set to "Off" to deactivate.
254:
255: KeepAlive On
256:
257: # MaxKeepAliveRequests: The maximum number of requests to allow
258: # during a persistent connection. Set to 0 to allow an unlimited amount.
259: # We reccomend you leave this number high, for maximum performance.
260:
261: MaxKeepAliveRequests 100
262:
263: # KeepAliveTimeout: Number of seconds to wait for the next request
264:
265: KeepAliveTimeout 15
266:
267: # Server-pool size regulation. Rather than making you guess how many
268: # server processes you need, Apache dynamically adapts to the load it
269: # sees --- that is, it tries to maintain enough server processes to
270: # handle the current load, plus a few spare servers to handle transient
271: # load spikes (e.g., multiple simultaneous requests from a single
272: # Netscape browser).
273:
274: # It does this by periodically checking how many servers are waiting
275: # for a request. If there are fewer than MinSpareServers, it creates
276: # a new spare. If there are more than MaxSpareServers, some of the
277: # spares die off. These values are probably OK for most sites ---
278:
279: MinSpareServers 8
280: MaxSpareServers 20
281:
282: # Number of servers to start --- should be a reasonable ballpark figure.
283:
284: StartServers 10
285:
286: # Limit on total number of servers running, i.e., limit on the number
287: # of clients who can simultaneously connect --- if this limit is ever
288: # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
289: # It is intended mainly as a brake to keep a runaway server from taking
290: # Unix with it as it spirals down...
291:
292: MaxClients 150
293:
294: # MaxRequestsPerChild: the number of requests each child process is
295: # allowed to process before the child dies.
296: # The child will exit so as to avoid problems after prolonged use when
297: # Apache (and maybe the libraries it uses) leak. On most systems, this
298: # isn't really needed, but a few (such as Solaris) do have notable leaks
299: # in the libraries.
300:
301: MaxRequestsPerChild 100
302:
303: # Proxy Server directives. Uncomment the following line to
304: # enable the proxy server:
305:
306: #ProxyRequests On
307:
308: # To enable the cache as well, edit and uncomment the following lines:
309:
310: #CacheRoot /var/cache/httpd
311: #CacheSize 5
312: #CacheGcInterval 4
313: #CacheMaxExpire 24
314: #CacheLastModifiedFactor 0.1
315: #CacheDefaultExpire 1
316: #NoCache a_domain.com another_domain.edu joes.garage_sale.com
317:
318: # Listen: Allows you to bind Apache to specific IP addresses and/or
319: # ports, in addition to the default. See also the VirtualHost command
320:
321: #Listen 3000
322: #Listen 12.34.56.78:80
323:
324: # VirtualHost: Allows the daemon to respond to requests for more than one
325: # server address, if your server machine is configured to accept IP packets
326: # for multiple addresses. This can be accomplished with the ifconfig
327: # alias flag, or through kernel patches like VIF.
328:
329: # Any httpd.conf or srm.conf directive may go into a VirtualHost command.
330: # See also the BindAddress entry.
331:
332: #<VirtualHost host.some_domain.com>
333: #ServerAdmin webmaster@host.some_domain.com
334: #DocumentRoot /www/docs/host.some_domain.com
335: #ServerName host.some_domain.com
336: #ErrorLog logs/host.some_domain.com-error_log
337: #TransferLog logs/host.some_domain.com-access_log
338: #</VirtualHost>
339:
1.2 albertel 340: ExtendedStatus On
1.3 ! harris41 341:
! 342: Include conf/loncapa.conf
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to httpd.conf CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / loncom