[BACK]Return to lonManage CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom

Diff for /loncom/Attic/lonManage between versions 1.2 and 1.27

version 1.2, 2003/08/12 09:58:49 version 1.27, 2003/12/22 12:02:19
Line 33 Line 33
 #   it is a command line tool.  The following command line syntax (usage)  #   it is a command line tool.  The following command line syntax (usage)
 #   is supported:  #   is supported:
 #  #
 #    lonManage  -push   <tablename>  newfile  host  #    lonManage  -push   <tablename>  newfile  [host]
 #        Push <tablename> to the lonTabs directory.  Note that  #        Push <tablename> to the lonTabs directory.  Note that
 #        <tablename> must be one of:  #        <tablename> must be one of:
 #           hosts  (hosts.tab)  #           host  (hosts.tab)
 #           domain (domain.tab)  #           domain (domain.tab)
 #  #
 #    lonManage  -reinit lonc host  #    lonManage  -reinit lonc [host]
 #           Sends a HUP signal to the remote systems's lond.  #           Sends a HUP signal to the remote systems's lond.
 #  #
 #    lonmanage  -reinit lond host  #    lonmanage  -reinit lond [host]
 #          Requests the remote system's lond perform the same action as if  #          Requests the remote system's lond perform the same action as if
 #          it had received a HUP signal.  #          it had received a HUP signal.
 #  #
 #    In the above syntax, the host above is the hosts.tab name of a host,  #    In the above syntax, the host above is the hosts.tab name of a host,
 #    not the IP address of the host.  #    not the IP address of the host
 #  #  
 #  $Log$  #   If [host] is not supplied, every host in the client's hosts.tab
 #  Revision 1.2  2003/08/12 09:58:49  foxr  #   table is iterated through and procesed..
 #  Add usage and skeleton documentation.  
 #  #
 #  #
   
 sub Usage {} {  
   
   # Modules required:
   
   use lib ".";
   
   use strict; # Because it's good practice.
   use English; # Cause I like meaningful names.
   use Getopt::Long;
   use LondConnection;
   use IO::Poll qw(POLLRDNORM POLLWRNORM POLLIN POLLHUP POLLOUT);
   
   # File scoped variables:
   
   my %perlvar; # Perl variable defs from apache config.
   my %hostshash; # Host table as a host indexed hash.
   
   my $MyHost=""; # Host name to use as me.
   my $ForeignHostTab=""; # Name of foreign hosts table.
   
   my $DefaultServerPort =  5663; # Default server port if standalone.
   my $ServerPort; # Port used to connect to lond.
   
   my $TransitionTimeout = 5; # Poll timeout in seconds.
   
   
   # LondConnection::SetDebug(10);
   
   
   #
   #   prints out utility's command usage info.
   #
   sub Usage  {
     print "Usage:";      print "Usage:";
     print <<USAGE;      print <<USAGE;
     lonManage  -push   <tablename>  newfile  host   lonManage  [--myname=host --hosts=table] --push=<tablename>  newfile  [host]
         Push <tablename> to the lonTabs directory.  Note that          Push <tablename> to the lonTabs directory.  Note that
         <tablename> must be one of:          <tablename> must be one of:
            hosts  (hosts.tab)             host  (hosts.tab)
            domain (domain.tab)             domain (domain.tab)
   
     lonManage  -reinit lonc host   lonManage [--myname=host --hosts=table] --reinit=lonc [host]
            Sends a HUP signal to the remote systems's lond.         Causes lonc in the remote system to reread hosts.tab and
          adjust the set of clients that are being maintained to match
     lonmanage  -reinit lond host         the new file.
           Requests the remote system's lond perform the same action as if         
           it had received a HUP signal.  
    lonManage [--myname=host --hosts=table] --reinit=lond [host]
          Causes lond in the remote system to reread the hosts.tab file
          and adjust the set of servers to match changes in that file.
   
     In the above syntax, the host above is the hosts.tab name of a host,      In the above syntax, the host above is the hosts.tab name of a host,
     not the IP address of the host.      not the IP address of the host.
   
       If [host] is omitted, all hosts in the hosts.tab file are iterated
       over.
   
   lonManage [--myname=host --hosts=table] --edit=<tablename> editscript [host]
        Requests lond edit the hosts or domain table (selected by
        tablename) with the editing command in editscript.  If
        host is supplied the individual host is operated on,
        otherwise, the entire cluster is operated on.
        The edit file has edit request, one per line of the form:
        append|newline
        replace|key|newline
        delete|key
        The key is a loncapa hostname if editing the host file
        or a domain name if editing the domain table file.
   
    For all of the above syntaxes if --myname=host and --hosts=table are
    supplied (both must be present), the utility runs in standalone mode
    presenting itself to the world as 'host' and using the hosts.tab file
    specified in the --hosts switch.
 USAGE  USAGE
   
   
 }  }
   
 #  #
 #    If command parsing failed, then print usage:  #  Make a direct connection to the lond in 'host'.  The port is 
   #  gotten from the global variable:  ServerPort.
   #  Returns:
   #    The connection or undef if one could not be formed.
   #
   sub MakeLondConnection {
       my $host = shift;
   
       my $Connection = LondConnection->new($host, $ServerPort);
       return return $Connection;
   }
   #
   #   Process the connection state machine until the connection
   #   becomes idle. This is used both to negotiate the initial
   #   connection, during which the LondConnection sequences a rather 
   #   complex state machine and during the transaction itself
   #   for a simpler set of transitions.
   #   All we really need to be concerned with is whether or not
   #   we're readable or writable and the final state:
   #
   #   Parameter:
   #       connection   - Represents the LondConnection to be sequenced.
   #       timeout      - Maximum time to wait for readable/writable sockets.
   #                      in seconds. < 0 waits forever.
   #   Return:
   #       'ok'         - We got to idle ok.
   #       'error:msg'  - An error occured. msg describes the error.
   #
   sub SequenceStateMachine {
       my $connection   = shift;
       my $timeout      = shift;
   
       my $Socket       = $connection->GetSocket;
       my $returnstatus = "ok";              # optimist!!!
       my $error        = 0;              # Used to force early loop termination
                                                 # damned perl has no break!!.
       my $state        = $connection->GetState;
   
       while(($connection->GetState ne "Idle") && (!$error)) {
         #
         # Figure out what the connection wants. read/write and wait for it
         # or for the timeout.
         #
    my $wantread = $connection->WantReadable;
    my $poll     = new IO::Poll;
    $poll->mask($Socket, => $wantread ? POLLIN : POLLOUT);
    my $handlecount = $poll->poll($timeout);
    if($handlecount == 0) {            # no handles ready... timeout!!
       $returnstatus  = "error:";
       $returnstatus .= "Timeout in state $state\n";
       $error         = 1;
    } else {
       my $done     = $poll->handles();
       my $status;
       $status        = $wantread ? $connection->Readable :
    $connection->Writable;
       if($status != 0) {
    $returnstatus  =  "error:";
    $returnstatus .=  " I/O failed in state $state\n";
    $error = 1;
       }
    }
    $state = $connection->GetState;
       }
       return $returnstatus;
   }
   
   #
   #    This function runs through the section of the connection
   #   state machine that has to do with negotiating the startup 
   #   sequence with lond.  The general strategy is to loop
   #   until the connection state becomes idle or disconnected.
   #   Disconnected indicates an error or rejection of the
   #   connection at some point in the negotiation.
   #   idle indicates a connection ready for a request.
   #   The main loop consults the object to determine if it
   #   wants to be writeable or readable, waits for that
   #   condition on the socket (with timeout) and  then issues
   #   the appropriate LondConnection call. Note that
   #   LondConnection is capable of doing everything necessary
   #   to get to the initial idle state.
   # 
   #
   #  Parameters:
   #     connection - A connection that has been created with
   #                  the remote lond.  This connection should
   #                  be in the Connected state ready to send
   #                  the init sequence.
   #
   sub NegotiateStartup {
       my $connection = shift;
       my $returnstatus = "ok"; # Optimistic!!.
   
       my $state      = $connection->GetState;
      if($state ne "Connected") {
         print "Error: Initial lond connection state: $state should be Connected\n";
         return "error";
      }
   
      return SequenceStateMachine($connection, $TransitionTimeout);
   }
   #
   #   Perform a transaction with the remote lond.
   #   Paramters:
   #      connection - the connection object that represents
   #                   a LondConnection to the remote lond.
   #      command    - The request to send to the remote system.
   #   Returns:
   #       The 'reaction' of the lond to this command.
   #       However if the connection to lond is lost during the transaction
   #       or some other error occurs, the text "error:con_lost" is returned.
   #    
   sub PerformTransaction {
       my $connection  = shift;
       my $command     = shift;
       my $retval;                          # What we'll returnl.
   
      
       #  Set up the connection to do the transaction then
       #  do the I/O until idle or error.
       #
       $connection->InitiateTransaction($command);
   
       my $status = SequenceStateMachine($connection, $TransitionTimeout);
      if($status eq "ok") {
         $retval = $connection->GetReply;
      } else {
         $retval = $status;
      }
   
       return $retval;
   }
   #
   # Performs a transaction direct to a remote lond.
   #   Parameter:
   #      cmd  - The text of the request.
   #      host - The host to which the request ultimately goes.
   #   Returns:
   #      The text of the reply from the lond or con_lost if not able to contact
   #      lond/lonc etc.
   #
   sub subreply {
       my $cmd = shift;
       my $host = shift;
   
   
      my $connection  = MakeLondConnection($host);
      if ($connection eq undef) {
         return "Connect Failed";
      }
      my $reply = NegotiateStartup($connection);
      if($reply ne "ok") {
         return "connection negotiation failed";
      }
      my $reply =  PerformTransaction($connection, $cmd);
      return $reply;
   
   
   }
   #
   #  Use Getopt::Long to parse the parameters of the program.
   #
   #  Return value is a list consisting of:
   #    A 'command' which is one of:
   #       push   - table push requested.
   #       reinit - reinit requested.
   #   Additional parameters as follows:
   #       for push: Tablename, hostname
   #       for reinit: Appname  hostname
   #
   #   This function does not validation of the parameters of push and
   #   reinit.
   #
   #   returns a list.  The first element of the list is the operation name
   #   (e.g. reinit or push).  The second element is the switch parameter.
   #   for push, this is the table name, for reinit, this is the process name.
   #   Additional elements of the list are the command argument.  The count of
   #   command arguments is validated, but not their semantics.
   #
   #   returns an empty list if the parse fails.
   #
   
   
   sub ParseArgs {
       my $pushing    = '';
       my $reinitting = '';
       my $editing    = '';
       
       if(!GetOptions('push=s'    => \$pushing,
                      'reinit=s'  => \$reinitting,
                      'edit=s'    => \$editing,
                'myname=s'  => \$MyHost,
                'hosts=s'   => \$ForeignHostTab)) {
         return ();
      }
       #  The --myname and --hosts switch must have values and
       #  most both appear if either appears:
   
      if(($MyHost ne "") && ($ForeignHostTab eq "")) {
         return ();
      }
      if(($ForeignHostTab ne "") && ($MyHost eq "")) {
         return ();
      }
   
       #  Require exactly   one of --push, --reinit, or --edit
   
      my $command    = '';
      my $commandarg = '';
      my $paramcount = @ARGV; # Number of additional arguments.
   
      my $commands = 0;           # Number of commands seen.
   
      if($pushing ne '') {
   
         # --push takes in addition a table, and an optional  host:
         #
           
      if(($paramcount != 2) && ($paramcount != 1)) {
            return (); # Invalid parameter count.
         }
       
         $commands++;              # Count a command seen.
         $command    = 'push';
         $commandarg = $pushing;
    }
   
      if ($reinitting ne '') {
   
    # --reinit takes in addition just an optional  host name
   
         if($paramcount > 1) {
            return ();
         }
         $commands++;              #  Count a command seen.
         $command    = 'reinit';
         $commandarg = $reinitting; 
    }
   
      # --edit takes a script file and optional host name.
      #
      if ($editing ne "") {
         if(($paramcount != 2) && ($paramcount != 1)) {
            return ();              # Invalid parameter count.
         }
         
         $commands++;               # Count a command seen.
         $command    = 'edit';
         $commandarg = $editing;
      }
      
      #  At this point, $commands must be 1 or else we've seen
      #  The wrong number of command switches:
      
      if($commands != 1) {
         return ();
      }
   
       #  Build the result list:
   
      my @result = ($command, $commandarg);
      my $i;
      for($i = 0; $i < $paramcount; $i++) {
         push(@result, $ARGV[$i]);
      }
       
       return @result;
   }
   #
   #  Build the editor script.  This function:
   #  - Opens the edit script file.
   #  - Reads each line of the edit script file
   #  - Replaces the ending \n with a /
   #  - Appends it to the EditScript variable.
   #  - Returns the contents of the EditScript variable.
   #  Parameters:
   #     tabletype   - The type of table being built:
   #                   hosts or domain
   #     scriptname  - The script input file.
   #
   sub BuildEditScript {
      my $TableType    = shift;
      my $ScriptName   = shift;
      
      #Stub
      
      my @EditScript = (
         "$TableType\:append|".
            "nscll2|nscl\:library\:lonkashy.nscl.msu.edu\:35.8.32.89\n"
    ."delete|nscll2"
         );
      return \@EditScript;
   }
   #  Read the loncapa configuration stuff.  If ForeignHostTab is empty,
   #  assume we are part of a loncapa cluster and read the hosts.tab
   #  file from the config directory.  Otherwise, ForeignHossTab
   #  is the name of an alternate configuration file to read in 
   #  standalone mode.
   #
   sub ReadConfig {
   
   
      
      if($ForeignHostTab eq "") {
          my $perlvarref = LondConnection::read_conf('loncapa.conf');
          %perlvar    = %{$perlvarref};
          my $hoststab   = LondConnection::read_hosts(
      "$perlvar{lonTabDir}/hosts.tab");
         %hostshash     = %{$hoststab};
         $MyHost        = $perlvar{lonHostID}; # Set hostname from vars.
         $ServerPort    = $perlvar{londPort};
      } else {
   
         LondConnection::ReadForeignConfig($MyHost, 
                                           $ForeignHostTab);
         my $hoststab = LondConnection::read_hosts($ForeignHostTab); #  we need to know too.
      %hostshash   = %{$hoststab};
      $ServerPort    = $DefaultServerPort;
      }
   }
   #
   #  Determine if the target host is valid.
   #  This is done by reading the current hosts.tab file.
   #  For the host to be valid, it must be inthe file.
   #
   #  Parameters:
   #     host   - Name of host to check on.
   #  Returns:
   #     true   if host is valid.
   #     false  if host is invalid.
   #
   sub ValidHost {
       my $host       = shift;
      
   
       return defined $hostshash{$host};
   
   }
   
   
   
   #
   #  Performs a transaction with lonc.
   #  By the time this is called, the transaction has already been
   #  validated by the caller.
   #
   #   Parameters:
   #
   #   host    - hosts.tab name of the host whose lonc we'll be talking to.
   #   command - The base command we'll be asking lond to execute.
   #   body    - [optional] If supplied, this is a command body that is a ref.
   #             to an array of lines that will be appended to the 
   #             command.
   #
   #  NOTE:
   #    The command will be done as an encrypted operation.
   #
   sub Transact {
       my $host    = shift;
       my $command = shift;
       my $haveBody= 0;
       my $body;
       my $i;
   
      if(scalar @ARG) {
         $body = shift;
         $haveBody = 1;
      }
       #  Construct the command to send to the server:
       
      my $request = "encrypt\:"; # All requests are encrypted.
      $request   .= $command;
      if($haveBody) {
         $request .= "\:";
         my $bodylines = scalar @$body;
         for($i = 0; $i < $bodylines; $i++) {
            $request .= $$body[$i];
         }
      } else {
         $request .= "\n";
      }
       # Body is now built... transact with lond..
       
       my $answer = subreply($request, $host);
   
       print "$answer\n";
   
   }
   #
   #   Called to push a file to the remote system.
   #   The only legal files to push are hosts.tab and domain.tab.
   #   Security is somewhat improved by
   #   
   #   - Requiring the user run as root.
   #   - Connecting with lonc rather than lond directly ensuring this is a loncapa
   #     host
   #   - We must appear in the remote host's hosts.tab file.
   #   - The host must appear in our hosts.tab file.
   #
   #  Parameters:
   #     tablename - must be one of hosts or domain.
   #     tablefile - name of the file containing the table to push.
   #     host      - name of the host to push this file to.     
   #
   #    
   #
   sub PushFile {
       my $tablename = shift;
       my $tablefile = shift;
       my $host      = shift;
       
       # Open the table file:
   
      if(!open(TABLEFILE, "<$tablefile")) {
         die "ENOENT - No such file or directory $tablefile";
      }
     
       # Require that the host be valid:
   
      if(!ValidHost($host)) {
         die "EHOSTINVAL - Invalid host $host"; # Ok so I invented this 'errno'.
      }
       # Read in the file.  If the table name is valid, push it.
   
      my @table = <TABLEFILE>; #  These files are pretty small.
      close TABLEFILE;
   
      if( ($tablename eq "host")    ||
          ($tablename eq "domain")) {
         print("Pushing $tablename to $host\n");
         Transact($host, "pushfile:$tablename",\@table);
      } else {
         die "EINVAL - Invalid parameter. tablename: $tablename must be host or domain";
      }
   }
   #
   #   This function forms and executes an edit file with a
   #   remote lond server.  We build the full transaction string
   #   and use Transact to perform the transaction.
   #   Paramters:
   #      host     - loncapa name of host to operate on.
   #      body     - Body of the command.  We send:
   #                  edit:$body as the command request.
   #
   sub EditFile {
      my $host    = shift;
      my $body    = shift;
      
      if(!ValidHost($host)) {
         die "EHOSTINVAL - Invalid host $host";
      }
      Transact($host, "edit", $body);
   }
   
   #
   #   This function is called to reinitialize a server in a remote host.
   #   The servers that can be reinitialized are:
   #   - lonc   - The lonc client process.
   #   - lond   - The lond daemon.
   #  NOTE:
   #    Reinitialization in this case means re-scanning the hosts table,
   #    starting new lond/lonc's as approprate and stopping existing lonc/lond's.
   #
   #  Parameters:
   #     process - The name of the process to reinit (lonc or lond).
   #     host    - The host in which this reinit will happen.
   #
   #   >>>BUGBUG<<<< This belongs  in lonnet.pm
   #
   sub ReinitProcess {
      my $process = shift;
      my $host    = shift;
   
       #  Ensure the host is valid:
       
      if(!ValidHost($host)) {
         die "EHOSTINVAL - Invalid host $host";
      }
       # Ensure target process selector is valid:
   
      if(($process eq "lonc") ||
         ($process eq "lond")) {
         print("Reinitializing $process in $host\n");
         Transact($host, "reinit:$process");
      } else {
         die "EINVAL -Invalid parameter. Process $process must be lonc or lond";
      }
   }
   #--------------------------- Entry point: --------------------------
   
   
   
 if(0) {  #  Parse the parameters
   #  If command parsing failed, then print usage:
   
   my @params   = ParseArgs;
   my $nparam   = @params;
   
   if($nparam == 0) {
     Usage;      Usage;
       exit -1;
   }
   #
   #   Next, ensure we are running as EID root.
   #
   if ($EUID != 0) {
       die "ENOPRIV - No privilege for requested operation"
   }
   
   #
   #   Read the configuration file.
   #   
   
   ReadConfig; # Read the configuration info (incl.hosts).
   
   #   Based on the operation requested invoke the appropriate function:
   
   my $operation = shift @params;
   
   if($operation eq "push") {  # push tablename filename host
       my $tablename = shift @params;
       my $tablefile = shift @params;
       my $host      = shift @params;
       if($host) {
         PushFile($tablename, $tablefile, $host);
       } else { # Push to whole cluster.
         foreach my $host (keys %hostshash) {
            PushFile($tablename, $tablefile, $host);
         }
       }
   
   } elsif($operation eq "reinit") { # reinit processname host.
       my $process   = shift @params;
       my $host      = shift @params;
       if ($host) {
    ReinitProcess($process, $host);
       } else { # Reinit whole cluster.
    foreach my $host (keys %hostshash) {
       ReinitProcess($process,$host);
    }
       }
   } elsif($operation eq "edit") {   # Edit a table.
      my $tablename     = shift @params;
      my $scriptfile    = shift @params;
      my $host          = shift @params;
      my $CommandBody   = BuildEditScript($tablename, $scriptfile);
      if ($host) {
         EditFile($host, $CommandBody);
      } else {
         foreach my $ClusterMember (keys %hostshash) {
            EditFile($ClusterMember, $CommandBody);
         }
      }
 }  }
   else {
      Usage;
   }
   exit 0;
   
 =head1 NAME  =head1 NAME
     lonManage - Command line utility for remote management of lonCAPA      lonManage - Command line utility for remote management of lonCAPA
Line 92  if(0) { Line 699  if(0) {
 =head1 SYNOPSIS  =head1 SYNOPSIS
   
 Usage:  Usage:
     B<lonManage  -push   <tablename>  newfile  host>      B<lonManage  --push=<tablename>  newfile  host>
         Push <tablename> to the lonTabs directory.  Note that          Push <tablename> to the lonTabs directory.  Note that
         <tablename> must be one of:          <tablename> must be one of:
            hosts  (hosts.tab)             hosts  (hosts.tab)
            domain (domain.tab)             domain (domain.tab)
   
     B<lonManage  -reinit lonc host>      B<lonManage  --reinit=lonc host>
            Sends a HUP signal to the remote systems's lond.             Sends a HUP signal to the remote systems's lond.
   
     B<lonmanage  -reinit lond host>      B<lonManage  --reinit=lond host>
           Requests the remote system's lond perform the same action as if            Requests the remote system's lond perform the same action as if
           it had received a HUP signal.            it had received a HUP signal.
   
     In the above syntax, the host above is the hosts.tab name of a host,      B<lonManage  --edit=<tablename> editscript host>
     not the IP address of the host.           Requests the remote system's lond perform an edit
            on <tablename>  editscript supplies a set of 
            editing commands.  Each edit command is one of :
            
            append|key|newline
            delete|key|
            replace|key|newline
            
            The key above is the value of the loncapa host name
            in the file.
            
   In the above syntax, the host above is the 
   hosts.tab name of a host,
   not the IP address of the host.
   
   
 =head1 DESCRIPTION  =head1 DESCRIPTION
   
 =head1 PREREQUISITES  =head1 PREREQUISITES
   
   =item strict
   =item Getopt::Long
   =item English
   =item IO::Socket::UNIX
   =item LONCAPA::LondConnection
   
   =head1 KEY Subroutines.
   
 =head1  CATEGORIES  =head1  CATEGORIES
     Command line utility      Command line utility
   
Removed from v.1.2  
changed lines
  Added in v.1.27

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>