[BACK]Return to parse.pl CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom / build

Diff for /loncom/build/Attic/parse.pl between versions 1.9 and 1.39

version 1.9, 2000/12/10 04:15:23 version 1.39, 2001/05/18 18:52:09
Line 2 Line 2
   
 # Scott Harrison  # Scott Harrison
 # November 2000  # November 2000
   # 12/5/2000,12/7,12/8,12/9,12/10,12/11,12/12,12/13,12/14,12/21 Scott Harrison
   # 1/8/2001,1/10/2001,1/13/2001,1/16/2001,1/18/2001,1/23/2001 Scott Harrison
   # 2/26/2001,2/27/2001,3/5/2001,4/10/2001,4/11,2001,4/13,2001 Scott Harrison
   # 4/17/2001 Scott Harrison
   
 # Read in loncapa tags and metagroup tags  # Read in loncapa tags and metagroup tags.  Output various
   # useful files for viewing, compiling, monitoring, updating,
   # and installing.
   
   # This code works well.  HOWEVER, I was in a rush when I
   # wrote it.  Future plans are that the parsing should be
   # much more event-state based and the input should be
   # more XML-ish. -Scott
   
 # ---------------------------------------------- Read in command line arguments  # ---------------------------------------------- Read in command line arguments
 my ($file,$mode)=@ARGV;  my ($file,$mode)=@ARGV;
Line 65  while ($info1=~/\<loncapa\s+(.*?)\>/isg) Line 76  while ($info1=~/\<loncapa\s+(.*?)\>/isg)
     }      }
     elsif (uc($hash{'TYPE'}) eq "LOCATION") {      elsif (uc($hash{'TYPE'}) eq "LOCATION") {
         $info{$hash{'TYPE'}}{$hash{'DIST'}}{$hash{'TARGET'}}{'CATEGORY'}=                               $hash{'CATEGORY'};          $info{$hash{'TYPE'}}{$hash{'DIST'}}{$hash{'TARGET'}}{'CATEGORY'}=                               $hash{'CATEGORY'};
           $info{$hash{'TYPE'}}{$hash{'DIST'}}{$hash{'TARGET'}}{'LINKTO'}=                               $hash{'LINKTO'};
         $info{$hash{'TYPE'}}{$hash{'DIST'}}{$hash{'TARGET'}}{'SOURCE'}=                                               $hash{'SOURCE'};          $info{$hash{'TYPE'}}{$hash{'DIST'}}{$hash{'TARGET'}}{'SOURCE'}=                                               $hash{'SOURCE'};
         # get surrounding metagroup information          # get surrounding metagroup information
         my $ckeystring=$keystring; $ckeystring=~s/(SOURCE\=\"[^"]*)\*/$1\\\*/g;          my $ckeystring=$keystring; $ckeystring=~s/(SOURCE\=\"[^"]*)\*/$1\\\*/g;
Line 85  while ($info1=~/\<loncapa\s+(.*?)\>/isg) Line 97  while ($info1=~/\<loncapa\s+(.*?)\>/isg)
     }      }
 }  }
   
 if ($mode eq "ALL" || $mode eq "HTML") {  my $a;
     my $a;  my @directories;
   if ($mode eq "HTML") {
     $a=&begin_description_page;      $a=&begin_description_page;
     print $a;      print $a;
     $a=&make_rpm_description_block;      $a=&make_rpm_description_block;
Line 101  if ($mode eq "ALL" || $mode eq "HTML") { Line 114  if ($mode eq "ALL" || $mode eq "HTML") {
     $a=&end_description_page;      $a=&end_description_page;
     print $a;      print $a;
 }  }
   elsif ($mode eq "SPEC") {
       my $out=$info{'RPM'}{'Name'} . '-' . $info{'RPM'}{'Version'} . '.spec';
       open OUT,">$out";
       $a=&make_rpm_spec_block;
       print OUT $a;
       $a=&make_rpm_build_block;
       print OUT $a;
       @directories=&determine_directory_structure;
       $a=&make_directory_structure_spec_block(\@directories);
       print OUT $a;
       $a=&make_directory_and_file_structure_spec_block(\@directories);
       print OUT $a;
       $a=&end_spec_page;
       print OUT $a;
       close OUT;
   }
   elsif ($mode eq "LCMakefile") {
       @directories=&determine_directory_structure;
       $a=&make_directory_LCMakefile_segment(\@directories);
       print $a;
       $a=&make_files_LCMakefile_segment(\@directories);
       print $a;
       $a=&make_links_LCMakefile_segment(\@directories);
       print $a;
   }
   elsif ($mode eq "BinaryRoot") {
       mkdir "BinaryRoot",0755;
       open OUT,">Makefile.BinaryRoot";
       @directories=&determine_directory_structure;
       $a=&make_directory_binaryroot_segment(\@directories);
       print OUT $a;
       $a=&make_files_binaryroot_segment(\@directories);
       print OUT $a;
       $a=&make_links_binaryroot_segment(\@directories);
       print OUT $a;
       close OUT;
       print `make -f Makefile.BinaryRoot TARGET='BinaryRoot' SOURCE='../..' directories`;
       print `make -f Makefile.BinaryRoot TARGET='BinaryRoot' SOURCE='../..' files`;
       print `make -f Makefile.BinaryRoot TARGET='BinaryRoot' SOURCE='../..' links`;
       open OUT,">base_file_list.txt";
       $a=&make_file_list(\@directories);
       print OUT $a;
       close OUT;
       open OUT,">setup_file_list.txt";
       print OUT "BinaryRoot/etc/passwd\n";
       close OUT;
       open OUT,">BinaryRoot/etc/passwd";
       print OUT<<END;
   root::0:0:root:/root:/bin/bash
   bin:!!:1:1:bin:/bin:
   daemon:!!:2:2:daemon:/sbin:
   adm:!!:3:4:adm:/var/adm:
   lp:!!:4:7:lp:/var/spool/lpd:
   sync:!!:5:0:sync:/sbin:/bin/sync
   shutdown:!!:6:0:shutdown:/sbin:/sbin/shutdown
   halt:!!:7:0:halt:/sbin:/sbin/halt
   mail:!!:8:12:mail:/var/spool/mail:
   news:!!:9:13:news:/var/spool/news:
   uucp:!!:10:14:uucp:/var/spool/uucp:
   operator:!!:11:0:operator:/root:
   games:!!:12:100:games:/usr/games:
   gopher:!!:13:30:gopher:/usr/lib/gopher-data:
   ftp:!!:14:50:FTP User:/home/ftp:
   nobody:!!:99:99:Nobody:/:
   www:!!:500:500:www:/home/www:/bin/bash
   END
   close OUT;
       open OUT,">>setup_file_list.txt";
       print OUT "BinaryRoot/etc/hosts.deny\n";
       close OUT;
       open OUT,">BinaryRoot/etc/hosts.deny";
       print OUT<<END;
   ALL: ALL
   END
   close OUT;
       
       `install -o www -g users -m 0700 -d BinaryRoot/home/www`;
       open OUT,">>setup_file_list.txt";
       print OUT "BinaryRoot/home/www\n";
       close OUT;
       `install -d BinaryRoot/etc/pam.d`;
       open OUT,">>setup_file_list.txt";
       print OUT "BinaryRoot/etc/pam.d/passwd\n";
       close OUT;
       open OUT,">BinaryRoot/etc/pam.d/passwd";
       print OUT<<END;
   #%PAM-1.0
   auth       required     /lib/security/pam_pwdb.so shadow nullok
   account    required     /lib/security/pam_pwdb.so
   password   required     /lib/security/pam_cracklib.so retry=3
   password   required     /lib/security/pam_pwdb.so use_authtok nullok
   END
   close OUT;
       open OUT,">>setup_file_list.txt";
       print OUT "BinaryRoot/etc/pam.d/login\n";
       close OUT;
       open OUT,">BinaryRoot/etc/pam.d/login";
       print OUT<<END;
   #%PAM-1.0
   auth       required     /lib/security/pam_securetty.so
   auth       required     /lib/security/pam_pwdb.so shadow nullok
   auth       required     /lib/security/pam_nologin.so
   account    required     /lib/security/pam_pwdb.so
   password   required     /lib/security/pam_cracklib.so
   password   required     /lib/security/pam_pwdb.so nullok use_authtok
   session    required     /lib/security/pam_pwdb.so
   session    optional     /lib/security/pam_console.so
   END
   close OUT;
   
 # ------------------------------------------------- Begin description page  }
 sub begin_description_page {  elsif ($mode eq "status") {
       $a=&begin_description_page('status');
       print $a;
       $a=&make_rpm_description_block('status');
       print $a;
       @directories=&determine_directory_structure('status');
       $a=&make_directory_structure_description_block(\@directories,'status');
       print $a;
       $a=&make_file_type_ownership_and_permissions_description_block('status');
       print $a;
       $a=&make_directory_and_file_structure_description_block(\@directories,'status');
       print $a;
       $a=&end_description_page('status');
       print $a;
   }
   elsif ($mode eq "update") {
   }
   elsif ($mode eq "configinstall") {
       @directories=&determine_directory_structure;
       $a=&make_files_configinstall_segment(\@directories);
       print $a;
       $a=&make_files_configpermissions_segment(\@directories);
       print $a;
   }
   elsif ($mode eq "install") {
       @directories=&determine_directory_structure;
       $a=&make_directory_install_segment(\@directories);
       print $a;
       $a=&make_files_install_segment(\@directories);
       print $a;
       $a=&make_links_install_segment(\@directories);
       print $a;
   }
   elsif ($mode eq "build") {
       @directories=&determine_directory_structure;
       $a=&make_files_build_segment(\@directories);
       print $a;
   }
   
   # ------------------------------------------------------ a list of file targets
   sub make_file_list {
       my ($dirs)=@_;
       my $description;
       my @allfiles=keys %{$info{'LOCATION'}{$distribution}};
       foreach my $d (@$dirs) {
    # set other values
    $description.=<<END;
   BinaryRoot/$d
   END
    my $dirdescription=$info{'DIRECTORY'}{$distribution}{$d}{'DESCRIPTION'};
    $dirdescription="(" . $dirdescription . ")" if $dirdescription;
    # find files that are contained in this directory
    my @files;
    my @filesfull;
    foreach my $f (@allfiles) {
       if ($f=~/^$d\/([^\/]+)$/) {
    push @files,$1;
    push @filesfull,$f;
       }
    }
    # render starting HTML formatting elements
    if (@files) {
           }
    my $pwd=`pwd`; chop $pwd;
    if (@files) {
               foreach my $i (0..$#files) {
    my $category=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'CATEGORY'};
    my $chown=$info{'OWNERSHIP'}{$category}{'CHOWN'};
    my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
    my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
    my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    my $source=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'SOURCE'};
    my $rot="/".$filesfull[$i];
    if ($rot=~/\*/) {
       $rot=~s/[^\/]+$// if $rot=~/\*/;
       my $listing=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'FILES'};
       chop $listing;
       my @list=split(/\s+/,$listing);
       my $rot2;
       foreach my $l (@list) {
    $l=~s/^\s*//; $l=~s/\s*$//;
    $rot2.="BinaryRoot$rot$l\n" if length($l);
       }
       chop $rot2;
       $rot=$rot2;
    }
    else {
       $rot="BinaryRoot$rot";
    }
    if ($category eq "conf") {
       $rot.=" # config";
    }
    $description.=<<END;
   $rot
   END
       }
    }
       }
       $description.=<<END;
   
   END
       return $description;
   }
   
   # --------------------------------- Commands to make BinaryRoot directories
   sub make_directory_binaryroot_segment {
       my ($dirs)=@_;
       my $description=<<END;
   directories:
   END
       foreach my $d (@$dirs) {
    my $category=$info{'DIRECTORY'}{$distribution}{$d}{'CATEGORY'};
    my $chown=$info{'OWNERSHIP'}{$category}{'CHOWN'};
    my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
    my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
    my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    my ($owner,$group)=split(/\:/,$devchown);
    my $own=$devchown; $own=~s/\:/\,/;
    $description.=<<END;
   \tinstall -o $owner -g $group -m $devchmod -d \$(TARGET)/$d
   END
       }
       $description.=<<END;
   
   END
       return $description;
   }
   
   # --------------------------------------- Commands to make BinaryRoot files
   sub make_files_binaryroot_segment {
       my ($dirs)=@_;
       my $description=<<END;
   files:
   END
       my @allfiles=keys %{$info{'LOCATION'}{$distribution}};
       foreach my $d (@$dirs) {
    # set other values
    my $dirdescription=$info{'DIRECTORY'}{$distribution}{$d}{'DESCRIPTION'};
    $dirdescription="(" . $dirdescription . ")" if $dirdescription;
    # find files that are contained in this directory
    my @files;
    my @filesfull;
    foreach my $f (@allfiles) {
       if ($f=~/^$d\/([^\/]+)$/) {
    push @files,$1;
    push @filesfull,$f;
       }
    }
    # render starting HTML formatting elements
    if (@files) {
       $description.=<<END;
   \t# $d $dirdescription
   END
           }
    if (@files) {
               foreach my $i (0..$#files) {
    my $category=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'CATEGORY'};
    my $chown=$info{'OWNERSHIP'}{$category}{'CHOWN'};
    my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
    my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
    my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    my $source=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'SOURCE'};
    my $rot=$filesfull[$i];
    $rot=~s/[^\/]+$/\./ if $rot=~/\*/;
    my ($owner,$group)=split(/\:/,$devchown);
    $description.=<<END if $category ne 'symbolic link';
   \tinstall -o $owner -g $group -m $devchmod \$(SOURCE)/$source \$(TARGET)/$rot
   END
       }
    }
       }
       $description.=<<END;
   
   END
       return $description;
   }
   
   # ------------------------------ Commands to make BinaryRoot symbolic links
   sub make_links_binaryroot_segment {
       my ($dirs)=@_;
       my $description=<<END;
   links:
   END
       my @allfiles=keys %{$info{'LOCATION'}{$distribution}};
       foreach my $d (@$dirs) {
    # find files that are contained in this directory
    my @files;
    my @filesfull;
    foreach my $f (@allfiles) {
       if ($f=~/^$d\/([^\/]+)$/) {
    push @files,$1;
    push @filesfull,$f;
       }
    }
    # render starting HTML formatting elements
    if (@files) {
               foreach my $i (0..$#files) {
    my $category=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'CATEGORY'};
    my $linkto=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'LINKTO'};
    my $chown=$info{'OWNERSHIP'}{$category}{'CHOWN'};
    my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
    my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
    my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    $description.=<<END if $category eq 'symbolic link';
   \tln -s /$linkto \$(TARGET)/$filesfull[$i]
   END
       }
    }
       }
       $description.=<<END;
   
   END
       return $description;
   }
   
   # ------ Installation commands for a Makefile used only by a rpm -ba invocation
   sub make_directory_LCMakefile_segment {
       my ($dirs)=@_;
       my $description=<<END;
   directories:
   END
       foreach my $d (@$dirs) {
    my $category=$info{'DIRECTORY'}{$distribution}{$d}{'CATEGORY'};
    my $chown=$info{'OWNERSHIP'}{$category}{'CHOWN'};
    my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
    my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
    my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    my $own=$devchown; $own=~s/\:/\,/;
    $description.=<<END;
   \tinstall -m $devchmod -d \$(SOURCE)/$d \$(ROOT)/$d
   END
       }
       $description.=<<END;
   
   END
       return $description;
   }
   
   # ------ Installation commands for a Makefile used only by a rpm -ba invocation
   sub make_files_LCMakefile_segment {
       my ($dirs)=@_;
     my $description=<<END;      my $description=<<END;
   files:
   END
       my @allfiles=keys %{$info{'LOCATION'}{$distribution}};
       foreach my $d (@$dirs) {
    # set other values
    my $dirdescription=$info{'DIRECTORY'}{$distribution}{$d}{'DESCRIPTION'};
    $dirdescription="(" . $dirdescription . ")" if $dirdescription;
    # find files that are contained in this directory
    my @files;
    my @filesfull;
    foreach my $f (@allfiles) {
       if ($f=~/^$d\/([^\/]+)$/) {
    push @files,$1;
    push @filesfull,$f;
       }
    }
    # render starting HTML formatting elements
    if (@files) {
       $description.=<<END;
   \t# $d $dirdescription
   END
           }
    if (@files) {
               foreach my $i (0..$#files) {
    my $category=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'CATEGORY'};
    my $chown=$info{'OWNERSHIP'}{$category}{'CHOWN'};
    my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
    my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
    my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    my $rot=$filesfull[$i];
    $rot=~s/[^\/]+$/\./ if $rot=~/\*/;
    $description.=<<END if $category ne 'symbolic link';
   \tinstall -m $devchmod \$(SOURCE)/$filesfull[$i] \$(ROOT)/$rot
   END
       }
    }
       }
       $description.=<<END;
   
   END
       return $description;
   }
   
   # ------ Installation commands for a Makefile used only by a rpm -ba invocation
   sub make_links_LCMakefile_segment {
       my ($dirs)=@_;
       my $description=<<END;
   links:
   END
       my @allfiles=keys %{$info{'LOCATION'}{$distribution}};
       foreach my $d (@$dirs) {
    # find files that are contained in this directory
    my @files;
    my @filesfull;
    foreach my $f (@allfiles) {
       if ($f=~/^$d\/([^\/]+)$/) {
    push @files,$1;
    push @filesfull,$f;
       }
    }
    # render starting HTML formatting elements
    if (@files) {
               foreach my $i (0..$#files) {
    my $category=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'CATEGORY'};
    my $linkto=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'LINKTO'};
    my $chown=$info{'OWNERSHIP'}{$category}{'CHOWN'};
    my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
    my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
    my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    $description.=<<END if $category eq 'symbolic link';
   \tln -s /$linkto \$(ROOT)/$filesfull[$i]
   END
       }
    }
       }
       $description.=<<END;
   
   END
       return $description;
   }
   
   # --------------------------------- Installation commands to install directories
   sub make_directory_install_segment {
       my ($dirs)=@_;
       my $description=<<END;
   directories:
   END
       foreach my $d (@$dirs) {
    my $category=$info{'DIRECTORY'}{$distribution}{$d}{'CATEGORY'};
    my $source=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'SOURCE'};
    my $chown=$info{'OWNERSHIP'}{$category}{'CHOWN'};
    my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
    my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
    my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    my ($owner,$group)=split(/\:/,$devchown);
    my $own=$devchown; $own=~s/\:/\,/;
    $description.=<<END;
   \tinstall -o $owner -g $group -m $devchmod -d \$(TARGET)/$d
   END
       }
       $description.=<<END;
   
   END
       return $description;
   }
   
   # ------------------------------------------------------ Commands to build files
   sub make_files_build_segment {
       my ($dirs)=@_;
       my $description;
       my @allfiles=keys %{$info{'LOCATION'}{$distribution}};
       my $tab="\t";
       my $sources="# Dynamic Makefile generated by LON-CAPA build process\n\n";
       $sources.="SHELL=\"/bin/sh\"\n\n";
       $sources.="\nall: ";
       foreach my $d (@$dirs) {
    # set other values
    my $dirdescription=$info{'DIRECTORY'}{$distribution}{$d}{'DESCRIPTION'};
    $dirdescription="(" . $dirdescription . ")" if $dirdescription;
    # find files that are contained in this directory
    my @files;
    my @filesfull;
    foreach my $f (@allfiles) {
       if ($f=~/^$d\/([^\/]+)$/) {
    push @files,$1;
    push @filesfull,$f;
       }
    }
    if (@files) {
               foreach my $i (0..$#files) {
    # if has build information, output appropriate something
    my $build=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'BUILD'};
    my $source=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'SOURCE'};
    $build=~s/^\s+//; $build=~s/\s+$//;
    if ($build) {
       my $dependencies=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'DEPENDENCIES'};
       my $source2=$source;
   #    $source2=~s/^[^\/]+\///;
        $source2="../../" . $source2;
       $sources.="$source2 ";
       my $directory=$build;
   #    $directory=~s/^[^\/]+\///;
       $directory=~s/([^\/]+)$//;
        $directory="../../" . $directory;
       my $buildfile=$1;
       my $sdir=$source;
   #    $sdir=~s/^[^\/]+\///;
       $sdir=~s/([^\/]+)$//;
        $sdir="../../" . $sdir;
       $dependencies=~s/\s+$//;
       my $depstat="";
       if ($dependencies=~s/\s+\[ALWAYS_RUN_BUILD_COMMAND\]//) {
    $depstat=" alwaysrun";
       }
       $dependencies=~s/\s+/ $sdir/gs;
       my @deps=split(/\s+/,$dependencies);
       shift @deps;
       my $testing=<<END;
    \@if !(echo "");\\
           then echo "**** LON-CAPA WARNING **** Strange shell. Check your path settings.";\\
   END
       foreach my $d (@deps) {
    $testing.=<<END;
    elif !(test -r $d);\\
    then echo "**** LON-CAPA WARNING **** missing the file: $d";\\
   END
       }
       chop $testing;
       $description.=<<END;
   $source2: $depstat
   $testing
           else \\
       ${tab}cd $directory; sh ./$buildfile;\\
           fi
   
   END
    }
    my $category=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'CATEGORY'};
    my $source=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'SOURCE'};
    my $chown=$info{'OWNERSHIP'}{$category}{'CHOWN'};
    my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
    my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
    my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    my $rot=$filesfull[$i];
    $rot=~s/[^\/]+$/\./ if $rot=~/\*/;
   # $description.=<<END if $category ne 'symbolic link';
   #\tinstall -o $owner -g $group -m $devchmod \$(SOURCE)/$source \$(TARGET)/$rot
   #END
       }
    }
       }
       $description.=<<END;
   alwaysrun:
   
   END
       $sources.="\n\n";
       return ($sources . $description);
   }
   
   # --------------------------------------- Installation commands to install files
   sub make_files_install_segment {
       my ($dirs)=@_;
       my $description=<<END;
   files:
   END
       my @allfiles=keys %{$info{'LOCATION'}{$distribution}};
       foreach my $d (@$dirs) {
    # set other values
    my $dirdescription=$info{'DIRECTORY'}{$distribution}{$d}{'DESCRIPTION'};
    $dirdescription="(" . $dirdescription . ")" if $dirdescription;
    # find files that are contained in this directory
    my @files;
    my @filesfull;
    foreach my $f (@allfiles) {
       if ($f=~/^$d\/([^\/]+)$/) {
    push @files,$1;
    push @filesfull,$f;
       }
    }
    # render starting HTML formatting elements
    if (@files) {
       $description.=<<END;
   \t# $d $dirdescription
   END
           }
    if (@files) {
               foreach my $i (0..$#files) {
    my $category=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'CATEGORY'};
    my $source=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'SOURCE'};
    my $chown=$info{'OWNERSHIP'}{$category}{'CHOWN'};
    my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
    my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
    my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    my $rot=$filesfull[$i];
    $rot=~s/[^\/]+$/\./ if $rot=~/\*/;
    my ($owner,$group)=split(/\:/,$devchown);
    if ($category ne 'conf' && $category ne 'symbolic link') {
       if ($source!~/\*/) {
    $description.=<<END;
   \ttest -e \$(SOURCE)/$source \&\& install -o $owner -g $group -m $devchmod \$(SOURCE)/$source \$(TARGET)/$rot || echo "**** LON-CAPA WARNING **** CVS source file does not exist: \$(SOURCE)/$source"
   END
                       }
       else {
    $description.=<<END;
   \tinstall -o $owner -g $group -m $devchmod \$(SOURCE)/$source \$(TARGET)/$rot
   END
       }
                   }
       }
    }
       }
       $description.=<<END;
   
   END
       return $description;
   }
   
   # ------ Installation commands to install configuration files (and make backups)
   sub make_files_configinstall_segment {
       my ($dirs)=@_;
       my $description=<<END;
   configfiles:
   END
       my @allfiles=keys %{$info{'LOCATION'}{$distribution}};
       foreach my $d (@$dirs) {
    # set other values
    my $dirdescription=$info{'DIRECTORY'}{$distribution}{$d}{'DESCRIPTION'};
    $dirdescription="(" . $dirdescription . ")" if $dirdescription;
    # find files that are contained in this directory
    my @files;
    my @filesfull;
    foreach my $f (@allfiles) {
       if ($f=~/^$d\/([^\/]+)$/) {
    push @files,$1;
    push @filesfull,$f;
       }
    }
    # render starting HTML formatting elements
    if (@files) {
       $description.=<<END;
   \t# $d $dirdescription
   END
           }
    if (@files) {
               foreach my $i (0..$#files) {
    my $category=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'CATEGORY'};
    my $source=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'SOURCE'};
    my $chown=$info{'OWNERSHIP'}{$category}{'CHOWN'};
    my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
    my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
    my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    my $rot=$filesfull[$i];
    $rot=~s/[^\/]+$/\./ if $rot=~/\*/;
    my ($owner,$group)=split(/\:/,$devchown);
    if ($category eq 'conf') {
       $description.=<<END;
   \tcp -p \$(TARGET)/$rot \$(TARGET)/$rot`date +'.\%Y\%m\%d\%H\%M\%S'` 2>/dev/null; install -o $owner -g $group -m $devchmod \$(SOURCE)/$source \$(TARGET)/$rot
   END
                   }
       }
    }
       }
       $description.=<<END;
   
   END
       return $description;
   }
   
   # ------ Commands to enforce configuration file permissions
   sub make_files_configpermissions_segment {
       my ($dirs)=@_;
       my $description=<<END;
   configpermissions:
   END
       my @allfiles=keys %{$info{'LOCATION'}{$distribution}};
       foreach my $d (@$dirs) {
    # set other values
    my $dirdescription=$info{'DIRECTORY'}{$distribution}{$d}{'DESCRIPTION'};
    $dirdescription="(" . $dirdescription . ")" if $dirdescription;
    # find files that are contained in this directory
    my @files;
    my @filesfull;
    foreach my $f (@allfiles) {
       if ($f=~/^$d\/([^\/]+)$/) {
    push @files,$1;
    push @filesfull,$f;
       }
    }
    # render starting HTML formatting elements
    if (@files) {
       $description.=<<END;
   \t# $d $dirdescription
   END
           }
    if (@files) {
               foreach my $i (0..$#files) {
    my $category=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'CATEGORY'};
    my $source=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'SOURCE'};
    my $chown=$info{'OWNERSHIP'}{$category}{'CHOWN'};
    my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
    my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
    my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    my $rot=$filesfull[$i];
    $rot=~s/[^\/]+$/\./ if $rot=~/\*/;
    my ($owner,$group)=split(/\:/,$devchown);
    if ($category eq 'conf') {
       $description.=<<END;
   \tchmod $devchmod \$(TARGET)/$rot
   \tchown $devchown \$(TARGET)/$rot
   END
                   }
       }
    }
       }
       $description.=<<END;
   
   END
       return $description;
   }
   
   # ------------------------------ Installation commands to install symbolic links
   sub make_links_install_segment {
       my ($dirs)=@_;
       my $description=<<END;
   links:
   END
       chop $description;
       my $description2;
       my @allfiles=keys %{$info{'LOCATION'}{$distribution}};
       foreach my $d (@$dirs) {
    # find files that are contained in this directory
    my @files;
    my @filesfull;
    foreach my $f (@allfiles) {
       if ($f=~/^$d\/([^\/]+)$/) {
    push @files,$1;
    push @filesfull,$f;
       }
    }
    # render starting HTML formatting elements
    if (@files) {
               foreach my $i (0..$#files) {
    my $category=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'CATEGORY'};
    my $linkto=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'LINKTO'};
    my $chown=$info{'OWNERSHIP'}{$category}{'CHOWN'};
    my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
    my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
    my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    if ($category eq 'symbolic link') {
       $description.=" \$(TARGET)/$filesfull[$i]";
       $description2.=<<END;
   \$(TARGET)/$filesfull[$i]:
   \tln -s /$linkto \$(TARGET)/$filesfull[$i]
   
   END
                   }
       }
    }
       }
       $description.=<<END;
   
   END
       $description.=$description2;
       return $description;
   }
   
   # --------------------------------------------------------- Make RPM .spec block
   sub make_rpm_spec_block {
       my $pwd=`pwd`; chop $pwd;
       my $buildroot="$pwd/LON-CAPA-BuildRoot";
       my $source=$info{'RPM'}{'Name'} . "-" . $info{'RPM'}{'Version'} . '.tar.gz';
       my $description=<<END;
   Summary: $info{'RPM'}{'Summary'}
   Name: $info{'RPM'}{'Name'}
   Version: $info{'RPM'}{'Version'}
   Release: $info{'RPM'}{'Release'}
   Vendor: $info{'RPM'}{'Vendor'} 
   BuildRoot: $buildroot
   Copyright: $info{'RPM'}{'Copyright'}
   Group: $info{'RPM'}{'Group'}
   Source: $source
   AutoReqProv: $info{'RPM'}{'AutoReqProv'}
   \%description
   $info{'RPM'}{'description'}
   
   END
       return $description;
   }
   
   # --------------------------------------------------- Make RPM build .spec block
   sub make_rpm_build_block {
       my $pwd=`pwd`; chop $pwd;
       my $buildroot="$pwd/LON-CAPA-BuildRoot";
       my $sourceroot="$pwd/LON-CAPA-SourceRoot";
       my $description=<<END;
   
   \%prep
   \%setup
   
   \%build
   rm -Rf "$buildroot"
   
   \%install
   make -f LCMakefile ROOT="\$RPM_BUILD_ROOT" SOURCE="$sourceroot" directories
   make -f LCMakefile ROOT="\$RPM_BUILD_ROOT" SOURCE="$sourceroot" files
   make -f LCMakefile ROOT="\$RPM_BUILD_ROOT" SOURCE="$sourceroot" links
   
   \%pre
   $info{'RPM'}{'pre'}
   
   \%post
   \%postun
   
   \%files
   # \%doc README COPYING ChangeLog LICENSE
   END
       return $description;
   }
   
   # ------------------------------------- Make directory structure RPM .spec block
   sub make_directory_structure_spec_block {
       my ($dirs)=@_;
       foreach my $d (@$dirs) {
    my $category=$info{'DIRECTORY'}{$distribution}{$d}{'CATEGORY'};
    my $chown=$info{'OWNERSHIP'}{$category}{'CHOWN'};
    my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
    my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
    my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    my $own=$devchown; $own=~s/\:/\,/;
    $description.=<<END;
   \%dir \%attr($devchmod,$own) /$d
   END
       }
       return $description;
   }
   
   # ---------------------------- Make directory and file structure RPM .spec block
   sub make_directory_and_file_structure_spec_block {
       my ($dirs)=@_;
       my @allfiles=keys %{$info{'LOCATION'}{$distribution}};
       foreach my $d (@$dirs) {
    # set other values
    my $dirdescription=$info{'DIRECTORY'}{$distribution}{$d}{'DESCRIPTION'};
    $dirdescription="(" . $dirdescription . ")" if $dirdescription;
    # find files that are contained in this directory
    my @files;
    my @filesfull;
    foreach my $f (@allfiles) {
       if ($f=~/^$d\/([^\/]+)$/) {
    push @files,$1;
    push @filesfull,$f;
       }
    }
    # render starting HTML formatting elements
    if (@files) {
       $description.=<<END;
   # $d $dirdescription
   END
           }
    if (@files) {
               foreach my $i (0..$#files) {
    my $category=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'CATEGORY'};
    my $chown=$info{'OWNERSHIP'}{$category}{'CHOWN'};
    my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
    my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
    my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    my $own=$devchown; $own=~s/\:/\,/;
    my $config="";
    $config="\%config " if $category eq 'conf';
    $devchmod='-' if $category eq 'symbolic link';
    $description.=<<END;
   $config\%attr($devchmod,$own) /$filesfull[$i]
   END
       }
    }
       }
       return $description;
   }
   
   # ----------------------------------------------------------- End RPM .spec page
   sub end_spec_page {
   }
   
   # ------------------------------------------------------- Begin description page
   sub begin_description_page {
       my ($mode)=@_;
       my $description;
       unless ($mode eq 'status') {
       $description=<<END;
 <HTML>  <HTML>
 <HEAD>  <HEAD>
 <TITLE>LON-CAPA Software Description Page ($distribution, $date)</TITLE>  <TITLE>LON-CAPA Software Description Page ($distribution, $date)</TITLE>
Line 129  http://install.lon-capa.org/compile/inde Line 1020  http://install.lon-capa.org/compile/inde
 information.  information.
 </P>  </P>
 END  END
   }
       else {
    $description=<<END;
   <HTML>
   <HEAD>
   <TITLE>LON-CAPA Software File System Status Page ($distribution, $date)</TITLE>
   </HEAD>
   <BODY>
   <FONT SIZE=+2>LON-CAPA Software File System Status Page ($distribution, $date)</FONT>
   <BR>Michigan State University
   <BR>Learning Online with CAPA
   <BR>Contact korte\@lon-capa.org
   <UL>
   <LI>About this file
   <LI>Software Package Description
   <LI>Directory Structure
   <LI>File Type Ownership and Permissions
   <LI>File and Directory Structure
   </UL>
   <FONT SIZE=+2>About this file</FONT>
   <P>
   This file is generated dynamically by <TT>parse.pl</TT> as
   part of a status checking process.  See http://install.lon-capa.org/
   for more information.
   </P>
   END
       }
     return $description;      return $description;
   
 }  }
   
 # ------------------------------------------------- End description page  # ------------------------------------------------- End description page
Line 145  END Line 1064  END
   
 # ------------------------------------------------- Make RPM description block  # ------------------------------------------------- Make RPM description block
 sub make_rpm_description_block {  sub make_rpm_description_block {
     my $description=<<END;      my ($mode)=@_;
       my $description;
       unless ($mode eq 'status') {
       $description=<<END;
 <FONT SIZE=+2>Rolled in a RedHat 6.2 RPM, $date</FONT>  <FONT SIZE=+2>Rolled in a RedHat 6.2 RPM, $date</FONT>
 <P>  <P>
 <TABLE BGCOLOR=#FFFFFF BORDER=0 CELLPADDING=10 CELLSPACING=0>  <TABLE BGCOLOR=#FFFFFF BORDER=0 CELLPADDING=10 CELLSPACING=0>
Line 160  Group       : $info{'RPM'}{'Group'} Line 1082  Group       : $info{'RPM'}{'Group'}
 License     : $info{'RPM'}{'Copyright'}  License     : $info{'RPM'}{'Copyright'}
 Summary     : $info{'RPM'}{'Summary'}  Summary     : $info{'RPM'}{'Summary'}
 Description :   Description : 
 <PRE>  
 $info{'RPM'}{'description'}  $info{'RPM'}{'description'}
 </PRE>  </PRE>
 </TD></TR>  </TD></TR>
 </TABLE>  </TABLE>
 </P>  </P>
 END  END
   }
       else {
    my $exist=`rpm -q LON-CAPA-base 2>/dev/null`;
    unless ($exist) {
       $description=<<END;
   <FONT SIZE=+2>No LON-CAPA RPM on the system, (installed ??????)</FONT>
   <P>
   <TABLE BGCOLOR=#FFFFFF BORDER=0 CELLPADDING=10 CELLSPACING=0>
   <TR><TD>
   <FONT SIZE=+3>Error! A LON-CAPA-base RPM
   was never installed on this system!</FONT>
   </TD></TR>
   </TD></TR>
   </TABLE>
   </P>
   END
    }
    else {
       chop $exist;
       my $rpmname=`rpm -q --queryformat '%{NAME}' LON-CAPA-base`;
       my $rpmversion=`rpm -q --queryformat '%{VERSION}' LON-CAPA-base`;
       my $rpmrelease=`rpm -q --queryformat '%{RELEASE}' LON-CAPA-base`;
       my $idate=`rpm -q --queryformat '%{INSTALLTIME:date}' LON-CAPA-base`;
       my $rpmvendor=`rpm -q --queryformat '%{VENDOR}' LON-CAPA-base`;
       my $rpmbuildhost=`rpm -q --queryformat '%{BUILDHOST}' LON-CAPA-base`;
       my $rpmgroup=`rpm -q --queryformat '%{GROUP}' LON-CAPA-base`;
       my $rpmlicense=`rpm -q --queryformat '%{LICENSE}' LON-CAPA-base`;
       my $rpmsummary=`rpm -q --queryformat '%{SUMMARY}' LON-CAPA-base`;
       my $rpmdescription=`rpm -q --queryformat '%{DESCRIPTION}' LON-CAPA-base`;
       $description=<<END;
   <FONT SIZE=+2>Current RedHat RPM on the system, (installed $idate)</FONT>
   <P>
   <TABLE BGCOLOR=#FFFFFF BORDER=0 CELLPADDING=10 CELLSPACING=0>
   <TR><TD>
   <PRE>
   Name        : $rpmname
   Version     : $rpmversion
   Vendor      : $rpmvendor
   Release     : $rpmrelease
   Build Host  : $rpmbuildhost
   Group       : $rpmgroup
   License     : $rpmlicense
   Summary     : $rpmsummary
   Description : 
   $rpmdescription
   </PRE>
   </TD></TR>
   </TABLE>
   </P>
   END
   }
       }
     return $description;      return $description;
 }  }
   
Line 179  sub determine_directory_structure { Line 1152  sub determine_directory_structure {
   
 # ---------------------------------- Make directory structure description block  # ---------------------------------- Make directory structure description block
 sub make_directory_structure_description_block {  sub make_directory_structure_description_block {
     my ($dirs)=@_;      my ($dirs,$mode)=@_;
       my $dirstatus; my $statusheader;
     my $description=<<END;      my $description=<<END;
 <FONT SIZE=+2>Directory Structure Description, $date</FONT>  <FONT SIZE=+2>Directory Structure Description, $date</FONT>
 <P>  <P>
Line 205  END Line 1179  END
  $maxcount=$count if $count>$maxcount;   $maxcount=$count if $count>$maxcount;
  delete $diraccount{$d};   delete $diraccount{$d};
     }      }
       if ($mode eq 'status') {
    $statusheader="<TH ALIGN=LEFT BGCOLOR=#FFFFFF>Current Status</TH>";
       }
     $description.=<<END;      $description.=<<END;
 <TR>  <TR>
   $statusheader
 <TH ALIGN=LEFT BGCOLOR=#FFFFFF>Category</TH>  <TH ALIGN=LEFT BGCOLOR=#FFFFFF>Category</TH>
 <TH ALIGN=LEFT BGCOLOR=#FFFFFF>Permissions</TH>  <TH ALIGN=LEFT BGCOLOR=#FFFFFF>Permissions</TH>
 <TH ALIGN=LEFT BGCOLOR=#FFFFFF><FONT COLOR=#FF0000>Development<BR>Permissions</FONT></TH>  <TH ALIGN=LEFT BGCOLOR=#FFFFFF><FONT COLOR=#FF0000>Development<BR>Permissions</FONT></TH>
Line 227  END Line 1205  END
  my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};   my $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
  my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};   my $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
  my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};   my $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    if ($mode eq 'status') {
       my $ds=`find /$d -type d -prune -printf "\%m\t\%u\t\%g" 2>/dev/null`;
       unless ($ds) {
    $dirstatus='<TD BGCOLOR=#FFFFFF><B><U>MISSING</U></B></TD>';
       }
       else {
    my @dss=split(/\t/,$ds);
    my $dssz=$dss[0];
    $dssz="0" . $dss[0] if length($dss[0])<4;
    $dss[0]=$dssz;
    $ds="$dss[0] $dss[1]:$dss[2]";
    if ($ds eq "$chmod $chown" && $ds eq "$devchmod $devchown") {
       $dirstatus='<TD BGCOLOR=#FFFFFF>runtime+development</TD>';
    }
    elsif ($ds eq "$chmod $chown") {
       $dirstatus='<TD BGCOLOR=#FFFFFF>runtime</TD>';
    }
    elsif ($ds eq "$devchmod $devchown") {
       $dirstatus='<TD BGCOLOR=#FFFFFF>development</TD>';
    }
    else {
       $dirstatus="<TD BGCOLOR=#FFFFFF><B><U>ERROR</U></B><BR>$ds</TD>";
    }
       }
    }
  $description.=<<END;   $description.=<<END;
 <TR>  <TR>
   $dirstatus
 <TD BGCOLOR=#FFFFFF>$category</TD>  <TD BGCOLOR=#FFFFFF>$category</TD>
 <TD BGCOLOR=#FFFFFF><TT>$chmod $chown</TT></TD>  <TD BGCOLOR=#FFFFFF><TT>$chmod $chown</TT></TD>
 <TD BGCOLOR=#FFFFFF><FONT COLOR=#FF0000><TT>$devchmod $devchown</TT></FONT></TD>  <TD BGCOLOR=#FFFFFF><FONT COLOR=#FF0000><TT>$devchmod $devchown</TT></FONT></TD>
Line 247  END Line 1251  END
   
 # ------------------- Make file type ownership and permissions description block  # ------------------- Make file type ownership and permissions description block
 sub make_file_type_ownership_and_permissions_description_block {  sub make_file_type_ownership_and_permissions_description_block {
       my ($mode)=@_;
     my $description=<<END;      my $description=<<END;
 <FONT SIZE=+2>File Type Ownership and Permissions Descriptions, $date</FONT>  <FONT SIZE=+2>File Type Ownership and Permissions Descriptions, $date</FONT>
 <P>  <P>
Line 286  END Line 1291  END
   
 # ------------------------- Make directory and file structure description block  # ------------------------- Make directory and file structure description block
 sub make_directory_and_file_structure_description_block {  sub make_directory_and_file_structure_description_block {
     my ($dirs)=@_;      my ($dirs,$mode)=@_;
       my $statusheader; my $filestatus;
     my $description=<<END;      my $description=<<END;
 <FONT SIZE=+2>Directory and File Structure Description, $date</FONT>  <FONT SIZE=+2>Directory and File Structure Description, $date</FONT>
 <P>  <P>
Line 340  END Line 1346  END
 END  END
         }          }
  if (@files) {   if (@files) {
       if ($mode eq 'status') {
    $statusheader=<<END;
   <TH BGCOLOR=$color ALIGN=LEFT>Current Status</TH>
   END
       }
     $description.=<<END;      $description.=<<END;
 <TR>  <TR>
   $statusheader
 <TH BGCOLOR=$color ALIGN=LEFT COLSPAN=2>Type</TH>  <TH BGCOLOR=$color ALIGN=LEFT COLSPAN=2>Type</TH>
 <TH BGCOLOR=$color ALIGN=LEFT>File Name</TH>  <TH BGCOLOR=$color ALIGN=LEFT>File Name</TH>
 <TH BGCOLOR=$color ALIGN=LEFT>Function</TH>  <TH BGCOLOR=$color ALIGN=LEFT>Function</TH>
Line 353  END Line 1365  END
  my $category=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'CATEGORY'};   my $category=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'CATEGORY'};
  my $fdescription=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'DESCRIPTION'};   my $fdescription=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'DESCRIPTION'};
  my $source=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'SOURCE'};   my $source=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'SOURCE'};
    my $source2=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'SOURCE'};
  my $note=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'NOTE'};   my $note=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'NOTE'};
  $note.="<BR>" if $note;   $note.="<BR>" if $note;
  my $listing=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'FILES'};   my $listing=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'FILES'};
Line 385  END Line 1398  END
  $source="<FONT COLOR=#FF0000>$source</FONT>";   $source="<FONT COLOR=#FF0000>$source</FONT>";
     }      }
  }   }
    my $checksum;
    my $checksum_source;
    my $checksum_target;
    if ($mode eq 'status') {
       $filestatus='';
       my $fs;
       my $listing2=$info{'LOCATION'}{$distribution}{$filesfull[$i]}{'FILES'};
       my @E=split(/\s+/,$listing2); shift @E;
       if (@E) {
    $fs=`find /$filesfull[$i] -prune -printf "\%m\t\%u\t\%g\n" 2>/dev/null | wc -l`; chop $fs;
    if ($fs!=(@E+0)) {
       $ecount=(@E+0);
       $estuff=join(",",@E);
       $filestatus="<TD BGCOLOR=#FFFFFF><B><U>ERROR. SOME FILES ARE MISSING</U></B></TD>";
    }
    $fs=`find /$filesfull[$i] -prune -printf "\%m\t\%u\t\%g\n" 2>/dev/null | sort | uniq | wc -l`; chop $fs;
    if ($fs!=1) {
       $filestatus='<TD BGCOLOR=#FFFFFF><B><U>ERROR. THERE ARE MULTIPLE OWNERSHIPS/PERMISSIONS WHEN ALL THESE FILES SHOULD HAVE THE SAME CONFIGURATION</U></B></TD>';
    }
    else {
       $fs=`find /$filesfull[$i] -prune -printf "\%m\t\%u\t\%g\n" 2>/dev/null | sort | uniq`; chop $fs;
    }
       }
       else {
    $fs=`find /$filesfull[$i] -prune -printf "\%m\t\%u\t\%g" 2>/dev/null`;
    if (-f "/$filesfull[$i]" && !(-l "/$filesfull[$i]")) {
       $checksum_source=`md5sum ../../$source2 | cut -d ' ' -f1`;
       chop $checksum_source;
       $checksum_target=`md5sum /$filesfull[$i] | cut -d ' ' -f1`;
       chop $checksum_target;
   #    warn ("CS: $checksum_source, CT: $checksum_target\n");
       unless ($checksum_source eq $checksum_target) {
    $checksum="<BR><B><U>CHECKSUM DIFFERENCE</U></B>";
       }
    }
       }
       my $fsl=`find /$filesfull[$i] -type l -prune -printf "\%m\t\%u\t\%g" 2>/dev/null`;
       unless ($fs || $filestatus) {
    $filestatus='<TD BGCOLOR=#FFFFFF><B><U>MISSING</U></B></TD>';
       }
       elsif (!$filestatus) {
   
    $chmod=$info{'OWNERSHIP'}{$category}{'CHMOD'};
    $chown=$info{'OWNERSHIP'}{$category}{'CHOWN'};
    $devchmod=$info{'DEVOWNERSHIP'}{$category}{'CHMOD'};
    $devchown=$info{'DEVOWNERSHIP'}{$category}{'CHOWN'};
   
    my @fss=split(/\t/,$fs);
    my $fssz=$fss[0];
    $fssz="0" . $fss[0] if length($fss[0])<4;
    $fss[0]=$fssz;
    $fs="$fss[0] $fss[1]:$fss[2]";
    $s=' ';
    if ($fsl) {
       $fs="$fss[1]:$fss[2]";
       $s='';
    }
    if ($fs eq "$chmod$s$chown" && $fs eq "$devchmod$s$devchown") {
       $filestatus="<TD BGCOLOR=#FFFFFF>runtime+development$checksum</TD>";
    }
    elsif ($fs eq "$chmod$s$chown") {
       $filestatus="<TD BGCOLOR=#FFFFFF>runtime$checksum</TD>";
    }
    elsif ($fs eq "$devchmod$s$devchown") {
       $filestatus="<TD BGCOLOR=#FFFFFF>development$checksum</TD>";
    }
    else {
       $filestatus="<TD BGCOLOR=#FFFFFF><B><U>ERROR</U></B><BR>$fs</TD>";
    }
       }
    }    
  $description.=<<END;   $description.=<<END;
 <TR>  <TR>
   $filestatus
 <TD BGCOLOR=#A0A0A0><IMG SRC="$fcm{$category}.gif" ALT="$category"></TD>  <TD BGCOLOR=#A0A0A0><IMG SRC="$fcm{$category}.gif" ALT="$category"></TD>
 <TD BGCOLOR=$color>$category</TD>  <TD BGCOLOR=$color>$category</TD>
 <TD BGCOLOR=$color>$files[$i]</TD>  <TD BGCOLOR=$color>$files[$i]</TD>
Removed from v.1.9  
changed lines
  Added in v.1.39

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>