[BACK]Return to postinstall.pl CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom / build

Diff for /loncom/build/Attic/postinstall.pl between versions 1.1 and 1.3

version 1.1, 2000/11/17 22:33:35 version 1.3, 2000/11/20 23:23:15
Line 4 Line 4
 # to finalize a LON-CAPA  # to finalize a LON-CAPA
 # installation.  # installation.
   
 # get wget  # set /etc/hosts.deny to be ALL: ALL
 # download SupplementalRPMS  open OUT, ">/etc/hosts.deny";
 # download remove_extra.sh  print OUT "ALL: ALL\n";
 # download FinalRPMS  close OUT;
   
   if (1==0) {
   # get wget and install
   system('lynx -source http://install.lon-capa.org/3.1/SupplementalRPMS/wget-1.5.3-6.i386.rpm > wget-1.5.3-6.i386.rpm');
   system('rpm','-Uvh','--force','wget-1.5.3-6.i386.rpm');
   
   # download SupplementalRPMS and install
   system('wget','-r','http://install.lon-capa.org/3.1/SupplementalRPMS');
   system('rpm','-Uvh','--force','install.lon-capa.org/3.1/SupplementalRPMS');
   
   # download remove_extra.sh and run
   system('wget','http://install.lon-capa.org/3.1/scripts/remove_extra.sh');
   system('sh','./remove_extra.sh');
   
   # download FinalRPMS and install
   system('wget','-r','http://install.lon-capa.org/3.1/FinalRPMS');
   system('rpm','-Uvh','--force','install.lon-capa.org/3.1/FinalRPMS');
   
 # allow entry of new access.conf parameters  # allow entry of new access.conf parameters
   my @perlsetvars=("lonHostID","lonRole","lonAdmEMail","lonDefDomain","lonLoadLim","lonExpire");
   my %psvinfo=(
        "lonHostID" => <<END
   LON Host ID is an internal ID within the LON-CAPA
   network used to specify the uniqueness of a particular
   LON-CAPA server.  Current examples include "msul1", "msua3",
   "103l1", "fsul1", and "107a1".
   END
   ,     "lonRole" => <<END
   LON Role specifies the role this machine plays within
   the LON-CAPA network.  There are two valid values for
   this:
    * library
    * access
   END
   ,     "lonAdmEMail" => <<END
   LON System Administrator E-Mail specifies the e-mail
   address of an institutional member responsible for
   direct upkeep of this server.
   END
   ,     "lonDefDomain" => <<END
   LON Domain is a unique internal identifier within the LON-CAPA network
   specific to the home institution.  Current examples include
   "msu", "fsu", "103", and "107".
   END
   ,     "lonLoadLim" => <<END
   LON Load Limit specifies a threshold of activity within The Learning
   Online Network that this machine should provide.  We strongly recommend
   a value of 2.00.  Depending on processor architecture (dual processor),
   this value may be increased, but there is no readily available measure
   in this regard.
   END
   ,     "lonExpire" => <<END
   LON Expiration Time indicates, in seconds, how long distributed resources
   should be held in the server's cache when not being accessed by students,
   instructors, or any other class of user.  We recommend a value of 86400.
   END
        );
   my $template=`/bin/cat /etc/httpd/conf/access.conf`;
   my $okay=0;
   while ($okay==0) {
       foreach my $psv (@perlsetvars) {
           print "\n";
           print $psvinfo{$psv};
           print "\nEnter in value for $psv: "; my $input=<>; chop $input;
           my $pval=$input;
           $template=~s/(\nPerlSetVar\s+$psv\s+)\S+/$1$pval/;
           $pvar{$psv}=$pval;
       }
       print "\n\nThese are the current values:\n";
       foreach my $psv (@perlsetvars) {
           print "$psv\t\t$pvar{$psv}\n";
       }
       print "Are these correct? (y/n)";
       my $input=<>;
       if ($input=~/^y/i) {
           $okay=1;
       }
   }
   open OUT,">/etc/httpd/conf/access.conf";
   print OUT $template;
   close OUT;
   
   $template=`/bin/cat /etc/smb.conf`;
   foreach my $psv (@perlsetvars) {
       $template=~s/\{\{\{\{\[(.*?)\]\}\}\}\}/$pvar{$1}/ge;
   }
   open OUT,">/etc/smb.conf";
   print OUT $template;
   close OUT;
   }
 # unshadow passwords  # unshadow passwords
   # change this line in /etc/pam.d/login
   # password   required     /lib/security/pam_pwdb.so nullok use_authtok md5 shadow
   $template=`/bin/cat /etc/pam.d/login`;
   $template=~s|password   required     /lib/security/pam_pwdb\.so nullok use_authtok md5 shadow|password   required     /lib/security/pam_pwdb.so nullok use_authtok|;
   open OUT, ">/etc/pam.d/login";
   print OUT $template;
   close OUT;
   # change this line in /etc/pam.d/passwd
   # password   required     /lib/security/pam_pwdb.so use_authtok nullok md5 shadow 
   $template=`/bin/cat /etc/pam.d/passwd`;
   $template=~s|password   required     /lib/security/pam_pwdb\.so nullok use_authtok md5 shadow|password   required     /lib/security/pam_pwdb.so nullok use_authtok|;
   open OUT, ">/etc/pam.d/passwd";
   print OUT $template;
   close OUT;
   `/usr/sbin/pwunconv`;
   `/usr/sbin/grpunconv`;
   # set new passwords
   print "Now we need to have passwords entered in order to unshadow this machine.\n";
   system('stty -echo');
   $okay=0;
   my $input1;
   my $input2;
   while ($okay==0) {
       print "Enter in password for root: ";
       $input1=<>; chop $input1;
       print "\nEnter in password again for root: ";
       $input2=<>; chop $input2;
       if ($input1 ne $input2) {
           print "\nPasswords do not match, try again.\n";
       }
       else {
           $okay=1;
       }
   }
   open OUT, "|/usr/sbin/chpasswd";
   print OUT "root:$input1\n";
   close OUT;
   
   $okay=0;
   while ($okay==0) {
       print "\nEnter in password for www: ";
       $input1=<>; chop $input1;
       print "\nEnter in password again for www: ";
       $input2=<>; chop $input2;
       if ($input1 ne $input2) {
           print "\nPasswords do not match, try again.\n";
       }
       else {
           $okay=1;
       }
   }
   open OUT, "|/usr/sbin/chpasswd";
   print OUT "www:$input1\n";
   close OUT;
   system('stty echo');
   
   
   if (1==0) {
 # create mime.types link  # create mime.types link
   `ln -s /etc/mime.types /etc/httpd/conf/mime.types`;
   
 # restart network and inet services  # restart network and inet services
   system('/etc/rc.d/init.d/network','reload');
   system('/etc/rc.d/init.d/inet','restart');
 # restart httpd  # restart httpd
   system('/etc/rc.d/init.d/httpd','restart');
   
   # fix the setup of init.d processes
   # nfs
   # bash$ diff nfs nfs~
   # 6c6
   # < # chkconfig: 345 60 20
   # ---
   # > # chkconfig: - 60 20
   # then chkconfig
   
   # ntp
   # chkconfig 345
   # then chkconfig
   
   
   # make atalk specific modifications
   # /etc/atalk/config
   open OUT, ">/etc/atalk/config";
   print OUT <<END;
   # Appletalk configuration
   # Change this to increase the maximum number of clients that can connect:
   AFPD_MAX_CLIENTS=5
   # Change this to set the machine's atalk name:
   # ATALK_NAME=`echo \${HOSTNAME}|cut -d. -f1`
   ATALK_NAME=`grep '^PerlSetVar.*lonHostID' /etc/httpd/conf/access.conf | perl -e '\$_=<>; split(/\s+/); print "LONCAPA_\$_[2]";
   '`
   # Set which daemons to run:
   PAPD_RUN=no
   AFPD_RUN=yes
   # Control whether the daemons are started in the background
   ATALK_BGROUND=no
   END
   close OUT;
   # /etc/conf.modules should have this line
   #      alias net-pf-5 appletalk
   # depmod -a
   $template=`/bin/cat /etc/conf.modules`;
   $template.="alias net-pf-5 appletalk\n";
   open OUT, ">/etc/conf.modules";
   print OUT $template;
   close OUT;
   system('depmod -a');
   
   # restart nfs, smb, and atalk services
   system('/etc/rc.d/init.d/smb','restart');
   system('/etc/rc.d/init.d/atalk','restart');
   system('/etc/rc.d/init.d portmap','stop');
   system('/etc/rc.d/init.d nfs','stop');
   system('/etc/rc.d/init.d portmap','start');
   system('/etc/rc.d/init.d nfs','start');
   system('/etc/rc.d/init.d/smb','restart');
   system('/etc/rc.d/init.d/inet','restart');
   
 # restart loncontrol  # restart loncontrol
 # set /etc/hosts.deny to be ALL: ALL  print "Please be patient while loncontrol services are restarted (approximately 10 minutes).\n";
   system('/etc/rc.d/init.d/loncontrol','restart');
   
 # warn about /etc/hosts.allow  # warn about /etc/hosts.allow
   print <<END;
   Final note:  Currently your machine is set-up
   to disable many different kinds of network
   connectivity.  To enable network connectivity
   different than that needed for LON-CAPA, you
   must make appropriate adjustment to the
   /etc/hosts.allow file.
   END
   }
Removed from v.1.1  
changed lines
  Added in v.1.3

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>