Annotation of loncom/build/postinstall.pl, revision 1.5
1.1 harris41 1: #!/usr/bin/perl
2:
3: # A post-installation script
4: # to finalize a LON-CAPA
5: # installation.
6:
1.2 harris41 7: # set /etc/hosts.deny to be ALL: ALL
8: open OUT, ">/etc/hosts.deny";
9: print OUT "ALL: ALL\n";
10: close OUT;
11:
12: # get wget and install
13: system('lynx -source http://install.lon-capa.org/3.1/SupplementalRPMS/wget-1.5.3-6.i386.rpm > wget-1.5.3-6.i386.rpm');
14: system('rpm','-Uvh','--force','wget-1.5.3-6.i386.rpm');
15:
16: # download SupplementalRPMS and install
17: system('wget','-r','http://install.lon-capa.org/3.1/SupplementalRPMS');
1.5 ! harris41 18: system('rpm','-Uvh','--force','install.lon-capa.org/3.1/SupplementalRPMS/*.rpm');
1.2 harris41 19:
20: # download remove_extra.sh and run
21: system('wget','http://install.lon-capa.org/3.1/scripts/remove_extra.sh');
22: system('sh','./remove_extra.sh');
23:
24: # download FinalRPMS and install
25: system('wget','-r','http://install.lon-capa.org/3.1/FinalRPMS');
1.5 ! harris41 26: system('rpm','-Uvh','--force','install.lon-capa.org/3.1/FinalRPMS/*.rpm');
1.2 harris41 27:
1.1 harris41 28: # allow entry of new access.conf parameters
1.2 harris41 29: my @perlsetvars=("lonHostID","lonRole","lonAdmEMail","lonDefDomain","lonLoadLim","lonExpire");
30: my %psvinfo=(
31: "lonHostID" => <<END
32: LON Host ID is an internal ID within the LON-CAPA
33: network used to specify the uniqueness of a particular
34: LON-CAPA server. Current examples include "msul1", "msua3",
35: "103l1", "fsul1", and "107a1".
36: END
37: , "lonRole" => <<END
38: LON Role specifies the role this machine plays within
39: the LON-CAPA network. There are two valid values for
40: this:
41: * library
42: * access
43: END
44: , "lonAdmEMail" => <<END
45: LON System Administrator E-Mail specifies the e-mail
46: address of an institutional member responsible for
47: direct upkeep of this server.
48: END
49: , "lonDefDomain" => <<END
50: LON Domain is a unique internal identifier within the LON-CAPA network
51: specific to the home institution. Current examples include
52: "msu", "fsu", "103", and "107".
53: END
54: , "lonLoadLim" => <<END
55: LON Load Limit specifies a threshold of activity within The Learning
56: Online Network that this machine should provide. We strongly recommend
57: a value of 2.00. Depending on processor architecture (dual processor),
58: this value may be increased, but there is no readily available measure
59: in this regard.
60: END
61: , "lonExpire" => <<END
62: LON Expiration Time indicates, in seconds, how long distributed resources
63: should be held in the server's cache when not being accessed by students,
64: instructors, or any other class of user. We recommend a value of 86400.
65: END
66: );
67: my $template=`/bin/cat /etc/httpd/conf/access.conf`;
68: my $okay=0;
69: while ($okay==0) {
70: foreach my $psv (@perlsetvars) {
71: print "\n";
72: print $psvinfo{$psv};
73: print "\nEnter in value for $psv: "; my $input=<>; chop $input;
74: my $pval=$input;
75: $template=~s/(\nPerlSetVar\s+$psv\s+)\S+/$1$pval/;
76: $pvar{$psv}=$pval;
77: }
78: print "\n\nThese are the current values:\n";
79: foreach my $psv (@perlsetvars) {
80: print "$psv\t\t$pvar{$psv}\n";
81: }
82: print "Are these correct? (y/n)";
83: my $input=<>;
84: if ($input=~/^y/i) {
85: $okay=1;
86: }
87: }
88: open OUT,">/etc/httpd/conf/access.conf";
89: print OUT $template;
90: close OUT;
91:
92: $template=`/bin/cat /etc/smb.conf`;
93: foreach my $psv (@perlsetvars) {
94: $template=~s/\{\{\{\{\[(.*?)\]\}\}\}\}/$pvar{$1}/ge;
95: }
96: open OUT,">/etc/smb.conf";
97: print OUT $template;
98: close OUT;
1.4 harris41 99:
1.1 harris41 100: # unshadow passwords
1.2 harris41 101: # change this line in /etc/pam.d/login
102: # password required /lib/security/pam_pwdb.so nullok use_authtok md5 shadow
103: $template=`/bin/cat /etc/pam.d/login`;
104: $template=~s|password required /lib/security/pam_pwdb\.so nullok use_authtok md5 shadow|password required /lib/security/pam_pwdb.so nullok use_authtok|;
105: open OUT, ">/etc/pam.d/login";
106: print OUT $template;
107: close OUT;
108: # change this line in /etc/pam.d/passwd
109: # password required /lib/security/pam_pwdb.so use_authtok nullok md5 shadow
110: $template=`/bin/cat /etc/pam.d/passwd`;
111: $template=~s|password required /lib/security/pam_pwdb\.so nullok use_authtok md5 shadow|password required /lib/security/pam_pwdb.so nullok use_authtok|;
112: open OUT, ">/etc/pam.d/passwd";
113: print OUT $template;
114: close OUT;
115: `/usr/sbin/pwunconv`;
116: `/usr/sbin/grpunconv`;
117: # set new passwords
118: print "Now we need to have passwords entered in order to unshadow this machine.\n";
119: system('stty -echo');
120: $okay=0;
121: my $input1;
122: my $input2;
123: while ($okay==0) {
124: print "Enter in password for root: ";
125: $input1=<>; chop $input1;
126: print "\nEnter in password again for root: ";
127: $input2=<>; chop $input2;
128: if ($input1 ne $input2) {
129: print "\nPasswords do not match, try again.\n";
130: }
131: else {
132: $okay=1;
133: }
134: }
135: open OUT, "|/usr/sbin/chpasswd";
136: print OUT "root:$input1\n";
137: close OUT;
138:
139: $okay=0;
140: while ($okay==0) {
141: print "\nEnter in password for www: ";
142: $input1=<>; chop $input1;
143: print "\nEnter in password again for www: ";
144: $input2=<>; chop $input2;
145: if ($input1 ne $input2) {
146: print "\nPasswords do not match, try again.\n";
147: }
148: else {
149: $okay=1;
150: }
151: }
152: open OUT, "|/usr/sbin/chpasswd";
153: print OUT "www:$input1\n";
154: close OUT;
155: system('stty echo');
156:
1.1 harris41 157: # create mime.types link
1.2 harris41 158: `ln -s /etc/mime.types /etc/httpd/conf/mime.types`;
159:
1.1 harris41 160: # restart network and inet services
1.2 harris41 161: system('/etc/rc.d/init.d/network','reload');
162: system('/etc/rc.d/init.d/inet','restart');
1.1 harris41 163: # restart httpd
1.2 harris41 164: system('/etc/rc.d/init.d/httpd','restart');
165:
166: # fix the setup of init.d processes
167: # nfs
1.3 harris41 168: # bash$ diff nfs nfs~
169: # 6c6
170: # < # chkconfig: 345 60 20
171: # ---
172: # > # chkconfig: - 60 20
173: # then chkconfig
1.4 harris41 174: $template=`/bin/cat /etc/rc.d/init.d/nfs`;
175: $template=~s/\# chkconfig: - 60 20/\# chkconfig: 345 60 20/;
176: open OUT,">/etc/rc.d/init.d/nfs";
177: print OUT $template;
178: close OUT;
179: $template=`/bin/cat /etc/rc.d/init.d/xntpd`;
180: $template=~s/\# chkconfig: - 55 10/\# chkconfig: 345 55 10/;
181: open OUT,">/etc/rc.d/init.d/xntpd";
182: print OUT $template;
183: close OUT;
1.3 harris41 184:
185: # ntp
186: # chkconfig 345
187: # then chkconfig
188:
1.2 harris41 189: # make atalk specific modifications
1.3 harris41 190: # /etc/atalk/config
191: open OUT, ">/etc/atalk/config";
192: print OUT <<END;
193: # Appletalk configuration
194: # Change this to increase the maximum number of clients that can connect:
195: AFPD_MAX_CLIENTS=5
196: # Change this to set the machine's atalk name:
197: # ATALK_NAME=`echo \${HOSTNAME}|cut -d. -f1`
198: ATALK_NAME=`grep '^PerlSetVar.*lonHostID' /etc/httpd/conf/access.conf | perl -e '\$_=<>; split(/\s+/); print "LONCAPA_\$_[2]";
199: '`
200: # Set which daemons to run:
201: PAPD_RUN=no
202: AFPD_RUN=yes
203: # Control whether the daemons are started in the background
204: ATALK_BGROUND=no
205: END
206: close OUT;
207: # /etc/conf.modules should have this line
208: # alias net-pf-5 appletalk
209: # depmod -a
210: $template=`/bin/cat /etc/conf.modules`;
211: $template.="alias net-pf-5 appletalk\n";
212: open OUT, ">/etc/conf.modules";
213: print OUT $template;
214: close OUT;
215: system('depmod -a');
1.2 harris41 216:
1.4 harris41 217: # restart nfs, smb, xntpd and atalk services
1.2 harris41 218: system('/etc/rc.d/init.d/smb','restart');
219: system('/etc/rc.d/init.d/atalk','restart');
1.3 harris41 220: system('/etc/rc.d/init.d portmap','stop');
221: system('/etc/rc.d/init.d nfs','stop');
222: system('/etc/rc.d/init.d portmap','start');
223: system('/etc/rc.d/init.d nfs','start');
224: system('/etc/rc.d/init.d/smb','restart');
225: system('/etc/rc.d/init.d/inet','restart');
1.4 harris41 226: system('/etc/rc.d/init.d/xntpd','restart');
1.2 harris41 227:
1.1 harris41 228: # restart loncontrol
1.2 harris41 229: print "Please be patient while loncontrol services are restarted (approximately 10 minutes).\n";
230: system('/etc/rc.d/init.d/loncontrol','restart');
231:
1.1 harris41 232: # warn about /etc/hosts.allow
1.2 harris41 233: print <<END;
234: Final note: Currently your machine is set-up
235: to disable many different kinds of network
236: connectivity. To enable network connectivity
237: different than that needed for LON-CAPA, you
238: must make appropriate adjustment to the
239: /etc/hosts.allow file.
240: END
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to postinstall.pl CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / loncom / build