Annotation of loncom/build/Makefile, revision 1.142
1.48 harris41 1: # The LearningOnline Network with CAPA
2:
1.129 harris41 3: # Scott Harrison, your friendly neighborhood volunteer
1.142 ! harris41 4: # $Id: Makefile,v 1.141 2003/01/13 20:38:40 albertel Exp $
1.1 harris41 5:
1.129 harris41 6: # TYPICAL USAGE of this Makefile is primarily for two targets:
7: # "make build" and "make install".
8: # Many other targets and features are supported (see the initial
9: # help targets).
10:
11: # ======================================= Default settings for Makefile options
1.79 harris41 12: DISTPROBE=`perl ./distprobe`
13: DIST=$(DISTPROBE)
1.39 harris41 14: CATEGORY="development"
1.80 harris41 15: SOURCE=../..
1.51 harris41 16: TARGET=""
1.55 harris41 17: NORESTORECONF="0"
1.66 harris41 18: HOSTNAME=""
19: LAUNCH=| perl
1.106 harris41 20: QUERYLAUNCH=> /tmp/loncapa_query.pl; perl /tmp/loncapa_query.pl
1.66 harris41 21: OUTSTREAM=>
22: SAVE=program.pl.$(TIMESTAMP)
23: LAUNCHSAVE=$(OUTSTREAM) $(SAVE)
24: METAMTARGET=""
25: MTARGET=""
1.141 albertel 26: VERSION=0.6.1
1.142 ! harris41 27: # The current working definition for "RELEASE" is: changes not in the software,
! 28: # but in the operating system dependent packaging of the software. Thus, the
! 29: # generic tarball releases do not need to have a release number specified.
! 30: RELEASE=1 # As a general rule for now, this is always being set to "1".
1.126 harris41 31: DIRTARGET=loncapa-$(VERSION)
1.12 harris41 32:
1.129 harris41 33: # =============================================== Help targets for the Makefile
34: # If 'make' is run without any arguments, the 'help' target is called since
35: # it is the first target.
1.105 harris41 36: help:
1.52 harris41 37: @echo "*** You need to specify a valid target ***"
1.129 harris41 38: @echo "To get a list of valid targets: \"make help_TARGETS\""
39: @echo "To get a list of valid options: \"make help_OPTIONS\""
40: @echo " "
41: @echo "Typically invoked targets are:"
42: @echo " make build"
43: @echo " make install"
44: @echo " make test"
45: @echo " make clean"
46:
47: help_OPTIONS:
48: @echo "* ADJUSTABLE OPTIONS *"
1.105 harris41 49: @echo "(option) DIST can be redhat7, debian, redhat6.2, or default"
1.129 harris41 50: @echo " You probably do not need to specify this; it is"
51: @echo " automatically probed for."
52: @echo "(option) CATEGORY can be 'runtime' or 'development'; currently"
53: @echo " the 'development' setting is the most reliable;"
54: @echo " eventually, production machines should be using the"
55: @echo " 'runtime' settings"
56: @echo "(option) SOURCE is an absolute or relative directory path."
57: @echo " SOURCE corresponds to the root directory of the"
58: @echo " loncapa source release"
59: @echo "(option) TARGET is an absolute or relative directory path."
60: @echo " This is where files will be installed on your system."
61: @echo " Typically, this should be set to nothing (which"
62: @echo " corresponds to the '/' root of the entire filesystem)."
63: @echo "(option) NORESTORECONF, when set to a non-zero value, stops"
64: @echo " filesystem upgrades from overwriting existing "
65: @echo " configuration files. Ordinarily, NORESTORECONF=0, "
66: @echo " because the existing configuration files are safely"
67: @echo " dealt with (or so one hopes... :) )."
68: @echo "(option) HOSTNAME specifies the name of a remote server for"
69: @echo " which a NET_* Makefile target should be launched"
70: @echo "(option) VERSION; especially useful for the 'tardist' target"
71: @echo " this tags the tarball file and internal directories"
72: @echo " with a specific version string (conventionally "
73: @echo " numeric)"
74:
75: help_TARGETS:
76: @echo "*** RUNNING TESTS TO ENSURE SOLID PERFORMANCE ***"
77: @echo "test: test different parts of the LON-CAPA system (TEST_*)."
78: @echo " Makefile-dependent processes as well as horizontal and"
79: @echo " vertical aspects of the LON-CAPA system architecture"
80: @echo " are all tested."
81: @echo "TEST_lpml_scripts: make sure that the system can process"
82: @echo " the Linux Packaging Markup Language."
83: @echo " This is neither horizontal or vertical"
84: @echo " testing. The idea is to make sure that"
85: @echo " the installation software itself works"
86: @echo " as expected."
1.52 harris41 87: @echo "TEST_system_dependencies: make sure that all needed system "
88: @echo " components are active and present "
89: @echo " on the server such as perl modules"
90: @echo " and the MySQL database"
1.129 harris41 91: @echo " (horizontal testing)"
92: @echo "TEST_web_layer: mimic a login and various vertical actions on "
1.52 harris41 93: @echo " a LON-CAPA system"
1.129 harris41 94: @echo "TEST_hosts_tab: make sure that a loncapa/loncom/hosts.tab"
95: @echo " file is specified for installation"
96: @echo "TEST_html2ps: test for the presence of html2ps which is needed"
97: @echo " for making a PDF compilation for pdfdoc"
98: @echo "*** GENERAL TARGETS SUCH AS 'build' AND 'install' ***"
99: @echo "build: compile the source tree"
100: @echo "buildflag: a semaphore that helps educate the user to run"
101: @echo " 'make build' first before running 'make install'"
102: @echo "configinstall: install configuration files and restore with"
103: @echo " prior information"
1.134 albertel 104: @echo "install: install from a ***compiled*** source tree"
1.129 harris41 105: @echo " (see make build) to a specified TARGET destination"
106: @echo " on the filesystem (default setting is TARGET=/)."
107: @echo "rawinstall: just install files, links and directories without"
108: @echo " any bells or whistles (e.g. double-checking"
109: @echo " configurations, fine-tuning webserver, etc.)"
110: @echo "hosts_tab: install the hosts.tab to the filesystem"
111: @echo "webserverconf: fine-tune the web server configuration;"
112: @echo " make sure the proper 'Include' statements"
113: @echo " are appended to httpd.conf"
114: @echo "vanillatar: generate top-level files such as README, UPDATE,"
115: @echo " CHECKRPMS, and TEST (needed by tardist)"
116: @echo "tardist: build a tarball that will upgrade the software on a "
117: @echo " system"
118: @echo "sanitycheck: probe for common errors and recommend fixes to"
119: @echo " the user"
120: @echo "updatequery: solicit the user for machine configuration"
121: @echo " information; to be incorporated during an update"
122: @echo " procedure (via the UPDATE command)"
123: @echo "postinstall: double-check things after installation"
124: @echo "VERSION: tag the filesystem with version information inside"
125: @echo " /etc/loncapa-release"
126: @echo "aboutVERSION: place version information inside about.html"
127: @echo "*** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***"
128: @echo "Makefile.configinstall: generate a Makefile for configuration"
129: @echo " files; built dynamically from"
130: @echo " loncapafiles.lpml"
131: @echo "Makefile.build: generate a Makefile for compiling"
132: @echo " files inside the source directory; "
133: @echo " Makefile.build is generated from"
134: @echo " loncapafiles.lpml"
135: @echo "Makefile.install: generate a Makefile for installing"
136: @echo " files; built dynamically from"
137: @echo " loncapafiles.lpml"
138: @echo "*** TARGETS FOR OPERATING ON FILESYSTEMS ACROSS THE NETWORK ***"
139: @echo "lpmladm: coordinates username=lpmladm mediated secure shell"
140: @echo " processes; needed for the NET_* targets"
141: @echo "NET_hosts_tab: install the hosts.tab to a filesystem elsewhere"
142: @echo " on the network"
143: @echo "NET_webserverconf: fine-tune the web server configuration on a"
144: @echo " filesystem elsewhere on the network"
145: @echo "NET_rawinstall: launch the rawinstall target on a filesystem"
146: @echo " elsewhere on the network"
147: @echo "*** TARGETS FOR MAKING LISTS (MANIFESTS) OF LON-CAPA FILES ***"
148: @echo "MANIFEST_all: generate a list of all files to be included in"
149: @echo " the distributed tarball"
150: @echo "MANIFEST_cvs: essentially a list of all CVS/Entries files used"
151: @echo " for 'time-checking' intelligence"
1.134 albertel 152: @echo "MANIFEST_lpml: a list of all LON-CAPA files to be installed,"
1.129 harris41 153: @echo " compile from, used as building software, and"
154: @echo " testing"
155: @echo "MANIFEST_vanillatar: 'README'-type top-level files that a user"
156: @echo " of the distributed tarball would first"
157: @echo " look at and work with"
158: @echo "*** STATUS REPORT TARGETS ***"
159: @echo "warningnote: analyze the WARNINGS file and produce a synopsis"
160: @echo " and recommended action to the user"
1.52 harris41 161: @echo "HTML: generate an HTML-formatted description of the LON-CAPA"
1.129 harris41 162: @echo " source files"
163: @echo "status: compare the TARGET filesystem with a compiled loncapa "
1.52 harris41 164: @echo " source directory"
165: @echo "statuspost: post the results of "make status" to "
166: @echo " TARGET/home/httpd/html/lon-status/filestatus.html"
167: @echo "rpmstatus: compare the rpms on a system to defined lists "
1.129 harris41 168: @echo " loncapa/doc/otherfiles/cd_rpms and "
169: @echo " loncapa/doc/otherfiles/rpm_list.txt"
170: @echo "rpmstatuspost: post the results of 'make rpmstatus' to "
1.52 harris41 171: @echo " TARGET/home/httpd/html/lon-status/rpmstatus.html"
1.129 harris41 172: @echo "*** ALTERNATIVE PACKAGING TARGETS ***"
173: @echo "RPM: build LON-CAPA-base RPM from loncapa source repository"
174: @echo " (still under development)"
175: @echo "DPKG: build a loncapa Debian package from loncapa source"
176: @echo " repository (still under development)"
177: @echo "base_rpm_file_list: create a file listing to be used for"
178: @echo " generating an RPM software package"
179: @echo "BinaryRoot: create a BinaryRoot directory to be used for"
180: @echo " generating an RPM software package"
181: @echo "*** MASTER DOCUMENTATION TARGETS ***"
182: @echo "doc: generate web-page documentation for install.lon-capa.org"
183: @echo " (and eventually for documentation on installed machines)"
184: @echo "pdfdoc: make a PDF-formatted compilation of all installation"
185: @echo " documentation"
186: @echo "*** KEEPING THINGS CLEAN ***"
187: @echo "clean: remove any files that might (even by remote chance)"
188: @echo " interfere with rebuilding/recompiling software"
189: @echo "reallyclean: remove all files that were generated during"
190: @echo " building or compilation of the software"
1.136 harris41 191: @echo "uninstall: remove all directories that do not contain files"
192: @echo " from other software packages and that do not contain"
193: @echo " student and instructor data; NOTE THAT THIS IS"
194: @echo " INTERACTIVE--you will be given a final chance"
195: @echo " to look at what will and will not be deleted."
196: @echo " Still, be careful. This is a very new target and is"
197: @echo " an alpha-level software feature for now."
198: @echo "backup: rolls a tarball backup of all important student and "
199: @echo " instructor data (NOT YET IMPLEMENTED)"
200: @echo "restore: reseeds a LON-CAPA server with tarball backups "
201: @echo " generated by \"make backup\" (NOT YET IMPLEMENTED)"
1.129 harris41 202: @echo "*** A HELPFUL DEPENDENCY ***"
203: @echo "alwaysrun: blank target that is a dependency for targets"
204: @echo " that should \"always run\""
205:
206: # =========================== *** RUNNING TESTS TO ENSURE SOLID PERFORMANCE ***
1.1 harris41 207:
1.52 harris41 208: test: TEST_lpml_scripts TEST_system_dependencies TEST_web_layer
1.41 harris41 209: @echo "ALL SYSTEM DEPENDENCY TESTS SUCCESSFUL"
210:
211: TEST_system_dependencies:
1.52 harris41 212: @echo "TESTING SYSTEM DEPENDENCIES"
1.41 harris41 213: cd system_dependencies; make
1.44 harris41 214:
215: TEST_lpml_scripts:
1.52 harris41 216: @echo "TESTING LPML INSTALLATION CODE"
1.44 harris41 217: cd ../test; perl filecomparetest.pl
1.41 harris41 218:
1.52 harris41 219: TEST_web_layer:
1.77 harris41 220: @echo "TESTING WEB LAYER"
221: cd weblayer_test; make
1.2 harris41 222:
1.63 harris41 223: TEST_hosts_tab:
224: @echo "Testing hosts.tab"
1.120 albertel 225: @if (test -e ../hosts.tab); then \
1.129 harris41 226: echo "there is a defined link or file; assume okay"; \
1.63 harris41 227: else echo "**** ERROR **** hosts.tab not defined!" && \
228: echo -n "You need to do one of the following within your " && \
1.92 harris41 229: echo "CVS repository (cd loncapa/loncom)" && \
230: echo " 1) ln -s production_hosts.tab hosts.tab" && \
231: echo " 2) ln -s development_hosts.tab hosts.tab" && \
232: echo "or 3) ln -s rawhide_hosts.tab hosts.tab" && \
1.63 harris41 233: echo "(you most likely want option #1, production_hosts.tab)" && \
234: exit 1; \
235: fi
1.64 harris41 236:
1.129 harris41 237: TEST_html2ps:
238: @if (test -e /usr/local/html2ps/bin/html2ps); then \
239: echo "I can find html2ps; assume okay"; \
240: else \
241: echo "**** ERROR **** cannot find /usr/local/html2ps/bin/html2ps!" && \
242: echo "Please visit http://www.tdb.uu.se/~jan/html2ps.html" && \
243: exit 1; \
244: fi
245:
246: # ======================= *** GENERAL TARGETS SUCH AS 'build' AND 'install' ***
247:
248: build: Makefile.build pod2html.sh pod2man.sh
249: install -d $(SOURCE)/doc/man
250: install -d $(SOURCE)/doc/scripts
251: install -d $(SOURCE)/doc/lib/perl/Apache
252: echo -n "" > WARNINGS
253: make -f Makefile.build all
254: echo '1' > buildflag
255: make warningnote
256:
257: buildflag:
258: @echo "**** ERROR **** You need to run 'make build' first" > WARNINGS
259: make warningnote
260: @need_to_run_make_build_first 2>/dev/null
261:
262: configinstall: Makefile.configinstall
263: make -f Makefile.configinstall SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
264: configfiles
265: if (test "0" = $(NORESTORECONF)); then \
266: perl loncaparestoreconfigurations suffix .lpmlnew; fi
267:
268: install: buildflag VERSION TEST_hosts_tab Makefile.install Makefile
269: echo -n "" > WARNINGS
270: make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
271: directories
272: make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" files
273: make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" links
274: make SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
275: NORESTORECONF="$(NORESTORECONF)" configinstall
276: make postinstall
277: make warningnote
278: echo "You can run 'make test' to see if your system is ready to go!"
279: echo "NOTE THAT YOUR SYSTEM MUST HAVE MYSQL WITH A USER=\"www\" AND"
280: echo -n "PASSWORD=\"localhostkey\" FOR www\@localhost"
281: echo -n "(YOU MAY NEED TO REINITIALIZE YOUR MYSQL www\@localhost USER)"
282: echo -n "Please see http://install.lon-capa.org/ for more information"
283:
284: rawinstall: VERSION Makefile.install Makefile
285: echo -n "" > WARNINGS
286: make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
287: directories
288: make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" files
289: make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" links
290: make SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
291: NORESTORECONF="$(NORESTORECONF)" configinstall
1.66 harris41 292:
1.64 harris41 293: hosts_tab: TEST_hosts_tab
1.80 harris41 294: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
295: perl xfml_parse.pl $(SOURCE)/doc/loncapafiles/valid_hosts.xfml | \
1.64 harris41 296: perl lpml_parse.pl install $(CATEGORY) $(DIST) "$(SOURCE)" \
297: "$(TARGET)" > Makefile.install
1.66 harris41 298: make -f Makefile.install directories
1.64 harris41 299: make -f Makefile.install files
300: @echo "If hosts.tab has changed, restart httpd and loncontrol:"
301: @echo " /etc/rc.d/init.d/httpd restart"
302: @echo " /etc/rc.d/init.d/loncontrol restart"
303:
1.129 harris41 304: webserverconf:
305: cat $(SOURCE)/doc/loncapafiles/webserver.piml | \
306: perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH)
307:
308: # ---------------- Top-level files such as README, UPDATE, CHECKRPMS, and TEST
309: vanillatar:
310: # --------------------------- Point UPDATE to the internal make process
311: echo '#!/bin/sh' > $(SOURCE)/UPDATE
312: echo 'touch loncom/build/WARNINGS' >> $(SOURCE)/UPDATE;
313: echo 'ln -s loncom/build/WARNINGS WARNINGS' >> $(SOURCE)/UPDATE;
314: echo 'cd loncom/build; make build' >> $(SOURCE)/UPDATE
315: echo 'make rawinstall' >> $(SOURCE)/UPDATE
316: echo 'make configinstall' >> $(SOURCE)/UPDATE
317: echo 'make updatequery' >> $(SOURCE)/UPDATE
318: echo 'make hosts_tab' >> $(SOURCE)/UPDATE
319: echo 'make postinstall' >> $(SOURCE)/UPDATE
320: echo 'make aboutVERSION' >> $(SOURCE)/UPDATE
321: echo 'make warningnote' >> $(SOURCE)/UPDATE
322: # ----------------------------- Point TEST to the internal make process
323: echo '#!/bin/sh' > $(SOURCE)/TEST
324: echo 'cd loncom/build; make test' >> $(SOURCE)/TEST
1.132 harris41 325: echo 'cd system_dependencies || cd loncom/build/system_dependencies; cp -v CPAN_STATUS_REPORT ../../../CPAN_STATUS_REPORT' >> $(SOURCE)/TEST
1.129 harris41 326: # ----------------------------- Copy CHECKRPMS to the vanilla top-level
327: cp -v $(SOURCE)/loncom/build/CHECKRPMS $(SOURCE)/CHECKRPMS
328: # ----------------------- vanilla executables must indeed be executable
329: chmod a+rx $(SOURCE)/UPDATE
330: chmod a+rx $(SOURCE)/TEST
331: chmod a+rx $(SOURCE)/CHECKRPMS
332: # -------------------------------- Copy README to the vanilla top-level
333: cp -v $(SOURCE)/doc/shortest_path_redhat7.2.txt $(SOURCE)/README
334:
335: tardist:
336: make MANIFEST_all
337: make vanillatar
338: # -------------------------------------------------------- Make tardist
339: @cd $(SOURCE); \
340: if (test -h $(DIRTARGET)); then \
341: echo "$(DIRTARGET) link already defined; assume okay"; \
342: else \
343: ln -s . $(DIRTARGET); \
344: fi
345: cp -v $(SOURCE)/loncom/license/about.html \
346: $(SOURCE)/loncom/license/about.html.orig
347: make aboutVERSION
348: cd $(SOURCE); \
349: tar --no-recursion --numeric-owner --files-from MANIFEST \
350: -h -czf $(DIRTARGET).tar.gz 2>tar_WARNINGS || [ "0" == "0" ]
351: mv -v $(SOURCE)/loncom/license/about.html.orig \
352: $(SOURCE)/loncom/license/about.html
353: cat $(SOURCE)/tar_WARNINGS | \
354: xargs --replace=XXX echo '**** WARNING **** XXX' > WARNINGS
355: rm -f $(SOURCE)/tar_WARNINGS
356: make warningnote
357:
358: sanitycheck:
359: cat $(SOURCE)/doc/loncapafiles/sanitycheck.piml | \
360: perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
361: tee -a WARNINGS
362:
363: updatequery:
364: cat $(SOURCE)/doc/loncapafiles/updatequery.piml | \
365: perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(QUERYLAUNCH)
366:
1.130 albertel 367: reseval_fixup:
368: cat $(SOURCE)/doc/loncapafiles/reseval_fixup.piml | \
369: perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
370: tee -a WARNINGS
371:
1.137 albertel 372: clearoutoldspreadsheetcache:
373: cat $(SOURCE)/doc/loncapafiles/clearoutoldspreadsheetcache.piml | \
374: perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
375: tee -a WARNINGS
376:
1.133 harris41 377: sendmail_fix:
378: cat $(SOURCE)/doc/loncapafiles/sendmail_fix.piml | \
379: perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
380: tee -a WARNINGS
381:
1.129 harris41 382: postinstall:
383: make webserverconf
1.130 albertel 384: make reseval_fixup
1.137 albertel 385: make clearoutoldspreadsheetcache
1.129 harris41 386: make sanitycheck
1.133 harris41 387: make sendmail_fix
1.129 harris41 388:
389: VERSION:
390: install -d $(TARGET)/etc
391: echo -n "LON-CAPA release $(VERSION)-" > $(TARGET)/etc/loncapa-release
392: date +"%Y%m%d" >> $(TARGET)/etc/loncapa-release
393:
394: aboutVERSION:
395: cat $(SOURCE)/loncom/license/about.html | \
396: perl -e '$$d=`date +"%Y%m%d"`;chomp($$d);while(<>){s/\<\!\-\- VERSION \-\-\>/$(VERSION)-$$d/; print;}' > \
397: $(SOURCE)/loncom/license/about.html.new
398: mv -v $(SOURCE)/loncom/license/about.html.new \
399: $(SOURCE)/loncom/license/about.html
400:
401: # ========= *** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***
402:
403: Makefile.configinstall: $(SOURCE)/doc/loncapafiles/loncapafiles.lpml \
404: lpml_parse.pl
405: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
406: perl lpml_parse.pl configinstall $(CATEGORY) $(DIST) "$(SOURCE)" \
407: "$(TARGET)" > Makefile.configinstall
408:
409: Makefile.build: $(SOURCE)/doc/loncapafiles/loncapafiles.lpml lpml_parse.pl
410: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
411: perl lpml_parse.pl build $(CATEGORY) $(DIST) "$(SOURCE)" "$(TARGET)" \
412: > Makefile.build
413:
414: Makefile.install: alwaysrun
415: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
416: perl lpml_parse.pl install $(CATEGORY) $(DIST) "$(SOURCE)" \
417: "$(TARGET)" > Makefile.install
418:
419: # ============= *** TARGETS FOR OPERATING ON FILESYSTEMS ACROSS THE NETWORK ***
420:
1.66 harris41 421: lpmladm:
422: @if (test $(METAMTARGET) = "TRANSPORT"); then \
423: echo "Transporting to $(HOSTNAME)"; \
424: sudo make DIST=$(DIST) CATEGORY=$(CATEGORY) \
425: SOURCE="$(SOURCE)" \
426: TARGET="lpmladm.$(TIMESTAMP)" \
427: NORESTORECONF="$(NORESTORECONF)" "$(MTARGET)"; \
428: cd lpmladm.$(TIMESTAMP); \
429: sudo tar czvf ../tarball$(TIMESTAMP).tar.gz .; \
430: cd ..; scp tarball$(TIMESTAMP).tar.gz \
431: lpmladm@$(HOSTNAME):~/tarball$(TIMESTAMP).tar.gz; \
432: ssh lpmladm@$(HOSTNAME) sudo mv tarball$(TIMESTAMP).tar.gz /; \
433: ssh lpmladm@$(HOSTNAME) sudo tar -x -z -v -C / \
434: -p --same-owner -f \
435: /tarball$(TIMESTAMP).tar.gz; \
436: ssh lpmladm@$(HOSTNAME) sudo rm -f \
437: /tarball$(TIMESTAMP).tar.gz; \
438: elif (test $(METAMTARGET) = "LAUNCH"); then \
439: echo "Launching process on $(HOSTNAME)"; \
440: LAUNCHSAVE=$(OUTSTREAM) $(SAVE); \
441: make DIST=$(DIST) CATEGORY=$(CATEGORY) SOURCE="$(SOURCE)" \
442: TARGET="$(TARGET)" NORESTORECONF="$(NORESTORECONF)" \
443: LAUNCH="$(LAUNCHSAVE)" "$(MTARGET)"; \
444: scp $(SAVE) lpmladm@$(HOSTNAME):~/$(SAVE); \
445: ssh lpmladm@$(HOSTNAME) sudo perl $(SAVE); \
446: ssh lpmladm@$(HOSTNAME) sudo rm -f $(SAVE); \
447: else \
448: echo "**** ERROR **** Incorrect METAMTARGET"; \
449: fi
450:
1.129 harris41 451: NET_hosts_tab:
452: make TIMESTAMP=`date +"%s"` METAMTARGET="TRANSPORT" \
453: MTARGET="hosts_tab" HOSTNAME="$(HOSTNAME)" lpmladm
454:
455: NET_webserverconf:
456: make TIMESTAMP=`date +"%s"` METAMTARGET="LAUNCH" \
457: MTARGET="webserverconf" HOSTNAME="$(HOSTNAME)" lpmladm
458:
459: NET_rawinstall:
460: make TIMESTAMP=`date +"%s"` METAMTARGET="TRANSPORT" \
461: MTARGET="rawinstall" HOSTNAME="$(HOSTNAME)" lpmladm
462:
463: # ============== *** TARGETS FOR MAKING LISTS (MANIFESTS) OF LON-CAPA FILES ***
464:
465: MANIFEST_all:
466: # --------------------------------------------------------- start clean
467: rm -f $(SOURCE)/MANIFEST
468: make MANIFEST_lpml
469: make MANIFEST_vanillatar
470: make MANIFEST_cvs
471: # ---------------------------------- might as well include the MANIFEST
472: echo 'MANIFEST' >> $(SOURCE)/MANIFEST
473: # ------------------------------------------ hosts.tab are belong to us
474: echo 'loncom/rawhide_hosts.tab' >> $(SOURCE)/MANIFEST
475: echo 'loncom/production_hosts.tab' >> $(SOURCE)/MANIFEST
476: echo 'loncom/development_hosts.tab' >> $(SOURCE)/MANIFEST
477: # ------------------ Files needed for dynamically generated directories
478: echo 'doc/man' >> $(SOURCE)/MANIFEST
479: echo 'doc/lib' >> $(SOURCE)/MANIFEST
480: echo 'doc/lib/perl' >> $(SOURCE)/MANIFEST
481: echo 'doc/lib/perl/Apache' >> $(SOURCE)/MANIFEST
482: echo 'doc/scripts' >> $(SOURCE)/MANIFEST
483: # --------------------------------------------------- Clean up MANIFEST
484: cd $(SOURCE); \
485: sort MANIFEST | perl -nle 'print "$(DIRTARGET)/$$_"' | \
486: perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
487: perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
488: perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
489: perl -nle 's/\/\.\//\//g;print' | sort | uniq > \
490: MANIFEST_loncapa
491: cd $(SOURCE); mv -v MANIFEST_loncapa MANIFEST
492:
493: # --------------- MANIFEST files with important CVS versioning/date information
494: MANIFEST_cvs:
495: # ------ CVS/Entries directories to retain 'time-checking' intelligence
496: cd $(SOURCE); find . -type f -name 'Entries' | grep 'CVS/Entries' >> \
497: MANIFEST
498:
499: # ------------------- MANIFEST the building, testing and standard loncapa files
500: MANIFEST_lpml:
501: cat $(SOURCE)/doc/loncapafiles/buildfiles.lpml | \
502: perl lpml_parse.pl MANIFEST development default \
503: '$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
504: cat $(SOURCE)/doc/loncapafiles/testfiles.lpml | \
1.140 harris41 505: perl lpml_parse.pl MANIFEST development default \
506: '$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
507: cat $(SOURCE)/doc/loncapafiles/installfiles.lpml | \
1.129 harris41 508: perl lpml_parse.pl MANIFEST development default \
509: '$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
510: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
511: perl lpml_parse.pl MANIFEST development default \
512: '$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
513:
514: # ------------ Files for top-level (the vanilla layer that the user first sees)
515: MANIFEST_vanillatar:
516: echo 'README' >> $(SOURCE)/MANIFEST
517: echo 'UPDATE' >> $(SOURCE)/MANIFEST
518: echo 'TEST' >> $(SOURCE)/MANIFEST
519: echo 'CHECKRPMS' >> $(SOURCE)/MANIFEST
520:
521: # =============================================== *** STATUS REPORT TARGETS ***
522:
523: warningnote:
524: @if (test -s WARNINGS); then \
525: W=`grep -c '\*\*\*\* WARNING' WARNINGS`; \
526: E=`grep -c '\*\*\*\* ERROR' WARNINGS`; \
527: N=`grep -c '\*\*\*\* NOTE' WARNINGS`; \
528: echo "---> $$W WARNINGS ENCOUNTERED! "; \
529: echo "---> $$E ERRORS ENCOUNTERED! "; \
530: echo "---> $$N NOTES ENCOUNTERED! "; \
531: echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"; \
532: echo "!!!! Please read the WARNINGS file !!!!"; \
533: echo "!!!! to make sure everything is !!!!"; \
534: echo "!!!! correct and taken care of !!!!"; \
535: echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"; \
536: fi
537:
1.3 harris41 538: HTML:
539: install -d HTML
1.80 harris41 540: cp $(SOURCE)/doc/loncapafiles/*.gif HTML
541: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
542: perl lpml_parse.pl html development default "$(SOURCE)" '$(TARGET)' \
543: > HTML/index.html
1.3 harris41 544:
1.8 harris41 545: status:
1.7 harris41 546: install -d HTML
1.80 harris41 547: cp $(SOURCE)/doc/loncapafiles/*.gif HTML
548: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
549: perl lpml_parse.pl html $(CATEGORY) $(DIST) "$(SOURCE)" "($TARGET)" | \
1.49 harris41 550: perl lpml_html_posteval.pl > \
1.39 harris41 551: HTML/filestatus.html
1.48 harris41 552:
1.22 harris41 553: statuspost: status
1.80 harris41 554: cp $(SOURCE)/doc/loncapafiles/*.gif \
555: $(TARGET)/home/httpd/html/lon-status
1.52 harris41 556: cp HTML/filestatus.html \
557: $(TARGET)/home/httpd/html/lon-status/filestatus.html
1.22 harris41 558:
1.33 harris41 559: rpmstatus:
560: install -d RPMSTATUS
1.52 harris41 561: rpm -qa --queryformat \
562: '%{NAME}\t%{VERSION}\t%{RELEASE}\t%{BUILDTIME}\n' | sort > \
563: RPMSTATUS/current.tmp
1.80 harris41 564: cat $(SOURCE)/doc/otherfiles/cd_rpms.txt > RPMSTATUS/standard.tmp
565: cat $(SOURCE)/doc/otherfiles/rpm_list.txt > RPMSTATUS/expected.tmp
1.52 harris41 566: perl rpmparse.pl RPMSTATUS/standard.tmp RPMSTATUS/current.tmp \
567: RPMSTATUS/expected.tmp > RPMSTATUS/rpmstatus.html
1.33 harris41 568:
569: rpmstatuspost: rpmstatus
570: cp RPMSTATUS/rpmstatus.html /home/httpd/html/lon-status/rpmstatus.html
571:
1.129 harris41 572: # ======================================= *** ALTERNATIVE PACKAGING TARGETS ***
1.8 harris41 573:
1.55 harris41 574: RPM: BinaryRoot base_rpm_file_list
1.80 harris41 575: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
1.63 harris41 576: perl lpml_parse.pl make_rpm $(CATEGORY) $(DIST) $(SOURCE) $(TARGET) \
577: > base_customizerpm.xml
1.142 ! harris41 578: cat base_rpm_file_list.txt | perl make_rpm.pl base $(VERSION) \
! 579: $(RELEASE) '' '' BinaryRoot base_customizerpm.xml
1.55 harris41 580:
1.60 harris41 581: DPKG:
1.82 harris41 582: make TARGET='lon-capa-$(VERSION)' NORESTORECONF='1' install
1.60 harris41 583: @echo "You will next need to follow instructions at:"
584: @echo "http://people.debian.org/~jaldhar/make_package1.html"
585: @echo "A directory with a snapshot of the debian package files"
586: @echo "is LON-CAPA-base."
1.82 harris41 587: # What DPKG steps need to happen (for future implementation):
588: # export EMAIL="" ... probably sharrison@mail.lon-capa.org
589: # deb-make
590: # edit debian/control
591: # make debian/dirs file
592: # make debian/copyright file
593: # debian/README.debian... point them to LON-CAPA URLS
594: # debian/changelog
595: # debian/conffiles
596: # debuild
597: # and maybe do some GPG-related steps around here
1.55 harris41 598:
599: base_rpm_file_list:
1.80 harris41 600: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
1.55 harris41 601: perl lpml_parse.pl rpm_file_list $(CATEGORY) $(DIST) $(SOURCE) \
602: 'BinaryRoot' | sort > base_rpm_file_list.txt
1.6 harris41 603:
1.55 harris41 604: BinaryRoot: base_rpm_file_list
605: make TARGET='BinaryRoot' NORESTORECONF='1' install
1.23 harris41 606:
1.129 harris41 607: # ======================================== *** MASTER DOCUMENTATION TARGETS ***
608:
1.62 harris41 609: # Generates CVS:loncom/build/docs; root location of install.lon-capa.org
610: doc:
611: install -d docs
1.99 harris41 612: @if (test -e installation_manual.pdf); then \
613: cp -vf installation_manual.pdf docs/.; \
614: else \
615: touch docs/installation_manual.pdf; \
616: fi
1.62 harris41 617: install -m 0755 -d docs/icons
1.80 harris41 618: install -m 0644 $(SOURCE)/doc/icons/[^C][^V]* docs/icons
1.62 harris41 619: install -m 0755 -d docs/reconfig
1.99 harris41 620: cd docs; ln -fs installation_manual.pdf index.pdf
621: cd docs/reconfig; ln -fs ../installation_manual.pdf index.pdf
1.80 harris41 622: perl doc_template.pl $(SOURCE)/doc/templates/template.html \
623: $(SOURCE)/doc/build/reconfig.html > docs/reconfig/index.html
1.62 harris41 624: install -m 0755 -d docs/reconfig/confexamples
1.80 harris41 625: install -m 0644 $(SOURCE)/doc/build/confexamples/[^C][^V]* \
1.62 harris41 626: docs/reconfig/confexamples
1.80 harris41 627: perl doc_template.pl $(SOURCE)/doc/templates/template.html \
628: $(SOURCE)/doc/build/installindex.html > docs/index.html
1.67 harris41 629: install -m 0755 -d docs/license
1.99 harris41 630: cd docs/license; ln -fs ../installation_manual.pdf index.pdf
1.80 harris41 631: perl doc_template.pl $(SOURCE)/doc/templates/template.html \
632: $(SOURCE)/doc/build/license.html > docs/license/index.html
1.67 harris41 633: install -m 0755 -d docs/contact
1.99 harris41 634: cd docs/contact; ln -fs ../installation_manual.pdf index.pdf
1.80 harris41 635: perl doc_template.pl $(SOURCE)/doc/templates/template.html \
636: $(SOURCE)/doc/build/contact.html > docs/contact/index.html
1.68 harris41 637: install -m 0755 -d docs/faq
1.99 harris41 638: cd docs/faq; ln -fs ../installation_manual.pdf index.pdf
1.80 harris41 639: perl doc_template.pl $(SOURCE)/doc/templates/template.html \
640: $(SOURCE)/doc/build/faq.html > docs/faq/index.html
1.69 harris41 641: install -m 0755 -d docs/downloads
1.99 harris41 642: cd docs/downloads; ln -fs ../installation_manual.pdf download.pdf
1.80 harris41 643: perl doc_template.pl $(SOURCE)/doc/templates/template.html \
644: $(SOURCE)/doc/build/download.html > docs/downloads/index.html
1.69 harris41 645: install -m 0755 -d docs/install
1.99 harris41 646: cd docs/install; ln -fs ../installation_manual.pdf install.pdf
1.80 harris41 647: perl doc_template.pl $(SOURCE)/doc/templates/template.html \
648: $(SOURCE)/doc/build/install.html > docs/install/index.html
1.125 harris41 649: cp -v $(SOURCE)/doc/install/redhat7.3/new_install_rh73.html \
650: docs/install/rh73.html
1.127 harris41 651: cp -v $(SOURCE)/doc/install/redhat7.3/new_install_rh73.html \
1.128 harris41 652: docs/downloads/rh73.html
1.69 harris41 653: install -m 0755 -d docs/upgrade
1.99 harris41 654: cd docs/upgrade; ln -fs ../installation_manual.pdf upgrade.pdf
1.80 harris41 655: perl doc_template.pl $(SOURCE)/doc/templates/template.html \
656: $(SOURCE)/doc/build/upgrade.html > docs/upgrade/index.html
1.62 harris41 657: cd docs; tar czvpf ../docs.tar.gz .
658:
1.99 harris41 659: pdfdoc: TEST_html2ps
660: install -d pdfdoc
661: /usr/local/html2ps/bin/html2ps -D \
662: $(SOURCE)/doc/build/installindex_noform.html > pdfdoc/installindex.ps
663: /usr/local/html2ps/bin/html2ps -D \
664: $(SOURCE)/doc/build/reconfig.html | \
665: perl -nle 's/\[EXAMPLE\]/\[EXAMPLE \(at end of document\)\]/g;print' \
666: > pdfdoc/reconfig.ps
667: /usr/local/html2ps/bin/html2ps -D \
668: $(SOURCE)/doc/build/install.html > pdfdoc/install.ps
669: /usr/local/html2ps/bin/html2ps -D \
670: $(SOURCE)/doc/build/upgrade.html > pdfdoc/upgrade.ps
671: /usr/local/html2ps/bin/html2ps -D \
672: $(SOURCE)/doc/build/faq.html > pdfdoc/faq.ps
673: /usr/local/html2ps/bin/html2ps -D \
674: $(SOURCE)/doc/build/download.html > pdfdoc/download.ps
675: /usr/local/html2ps/bin/html2ps -D \
676: $(SOURCE)/doc/build/contact.html > pdfdoc/contact.ps
677: /usr/local/html2ps/bin/html2ps -D \
678: $(SOURCE)/doc/build/license.html > pdfdoc/license.ps
679: # This creates a bad confexamples.ps... so take the long way around
680: # cd $(SOURCE)/doc/build/confexamples; \
681: # mpage -P- -1 -H [^C]* > ../../../loncom/build/pdfdoc/confexamples.ps
682: install -d pdfdoc/confexamples
683: cd $(SOURCE)/doc/build/confexamples; \
1.129 harris41 684: find . -type f | cut -b3- | grep -v '^C' | grep -v 'keyword' | \
685: perl -nle \
1.99 harris41 686: '`mpage -P- -1 -H $$_ > ../../../loncom/build/pdfdoc/confexamples/$$_.ps`;'
687: echo '' > pdfdoc/contents.txt
688: echo '' >> pdfdoc/contents.txt
689: echo ' The Learning Online Network' >> pdfdoc/contents.txt
690: echo ' with the' >> pdfdoc/contents.txt
691: echo ' Computer-Assisted Personalized Approach' >> \
692: pdfdoc/contents.txt
693: echo '' >> pdfdoc/contents.txt
694: echo '' >> pdfdoc/contents.txt
695: echo 'CONTENTS' >> pdfdoc/contents.txt
696: echo '--------' >> pdfdoc/contents.txt
697: echo 'Opening' >> pdfdoc/contents.txt
698: echo 'Configuration' >> pdfdoc/contents.txt
699: echo 'Installation' >> pdfdoc/contents.txt
700: echo 'Upgrading a LON-CAPA Server' >> pdfdoc/contents.txt
701: echo 'FAQ' >> pdfdoc/contents.txt
702: echo 'Download' >> pdfdoc/contents.txt
703: echo 'Contact Information' >> pdfdoc/contents.txt
704: echo 'License Information' >> pdfdoc/contents.txt
705: echo 'Configuration Examples' >> pdfdoc/contents.txt
706: mpage -P- -1 \
707: pdfdoc/contents.txt \
708: pdfdoc/installindex.ps \
709: pdfdoc/reconfig.ps \
710: pdfdoc/install.ps \
711: pdfdoc/upgrade.ps \
712: pdfdoc/faq.ps \
713: pdfdoc/download.ps \
714: pdfdoc/contact.ps \
715: pdfdoc/license.ps \
716: pdfdoc/confexamples/*.ps \
717: > pdfdoc/installation_manual.ps
718: ps2pdf pdfdoc/installation_manual.ps pdfdoc/installation_manual.pdf
719: mv -vf pdfdoc/installation_manual.pdf .
720:
1.129 harris41 721: # ================================================ *** KEEPING THINGS CLEAN ***
1.52 harris41 722:
1.1 harris41 723: clean:
1.129 harris41 724: rm -f buildflag
1.112 harris41 725: rm -Rf HTML
726: rm -f installation_manual.pdf
727: rm -f Makefile.build
728: rm -f Makefile.install
729: rm -f Makefile.configinstall
730: rm -Rf BinaryRoot
731: rm -Rf SetupBinaryRoot
732: rm -Rf LON-CAPA-base
733: rm -f base_rpm_file_list.txt
734: rm -f base_customizerpm.xml
735: rm -f setup_rpm_file_list.txt
736: rm -f docs.tar.gz
737: rm -Rf docs
738: rm -Rf pdfdoc
739: rm -f program.pl*
740: rm -Rf lpmladm.*
741: rm -f WARNINGS
1.131 harris41 742: rm -f CPAN_STATUS_REPORT
1.114 harris41 743: rm -f $(SOURCE)/loncom/build/hosts.tab
1.112 harris41 744:
745: reallyclean:
1.129 harris41 746: rm -f buildflag
1.80 harris41 747: rm -f $(SOURCE)/README
748: rm -f $(SOURCE)/UPDATE
749: rm -f $(SOURCE)/TEST
1.105 harris41 750: rm -f $(SOURCE)/MANIFEST
1.129 harris41 751: rm -f $(SOURCE)/MANIFEST_loncapa
1.105 harris41 752: rm -f $(SOURCE)/loncapa
1.114 harris41 753: rm -f $(SOURCE)/loncom/build/hosts.tab
1.80 harris41 754: rm -f $(SOURCE)/loncapa.tar.gz
1.3 harris41 755: rm -Rf HTML
1.99 harris41 756: rm -f installation_manual.pdf
1.8 harris41 757: rm -f Makefile.build
758: rm -f Makefile.install
1.57 harris41 759: rm -f Makefile.configinstall
1.55 harris41 760: rm -Rf BinaryRoot
761: rm -Rf SetupBinaryRoot
1.62 harris41 762: rm -Rf LON-CAPA-base
1.56 harris41 763: rm -f base_rpm_file_list.txt
1.58 harris41 764: rm -f base_customizerpm.xml
1.56 harris41 765: rm -f setup_rpm_file_list.txt
1.62 harris41 766: rm -f docs.tar.gz
767: rm -Rf docs
1.99 harris41 768: rm -Rf pdfdoc
1.66 harris41 769: rm -f program.pl*
770: rm -Rf lpmladm.*
1.67 harris41 771: make -f Makefile.cvs clean
1.80 harris41 772: rm -f WARNINGS
1.136 harris41 773:
774: uninstall:
775: rm -f UNINSTALL_SHELL_COMMANDS
776: cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
777: perl lpml_parse.pl uninstall_shell_commands $(CATEGORY) $(DIST) \
778: "$(SOURCE)" "$(TARGET)" > UNINSTALL_SHELL_COMMANDS
779: @echo -n "**** NOTE **** A file \"UNINSTALL_SHELL_COMMANDS\" has been "
780: @echo "generated."
781: @echo "First, you should view the contents of this file."
782: @echo "If you are happy with the 'rm -Rf'! commands (or at least"
783: @echo "have another job lined up in case of catastrophe), then you "
784: @echo "can execute the following: sh ./UNINSTALL_SHELL_COMMANDS"
785:
786: backup:
787: @echo "Not yet implemented"
788:
789: restore:
790: @echo "Not yet implemented"
1.115 harris41 791:
1.129 harris41 792: # ================================================ *** A HELPFUL DEPENDENCY ***
1.115 harris41 793: alwaysrun:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to Makefile CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / loncom / build