File:
[LON-CAPA] /
loncom /
build /
Makefile
Revision
1.228:
download - view:
text,
annotated -
select for diffs
Sun Aug 4 00:24:25 2024 UTC (3 months ago) by
raeburn
Branches:
MAIN
CVS tags:
HEAD
- commands shell scripts for geogebra and ckeditor both use arrays.
Arrays are available in bash but not dash (where sh points on Ubuntu).
Pass bash as arg to perl lpml_parse.pl when creating Makefile.install.
# The LearningOnline Network with CAPA
# $Id: Makefile,v 1.228 2024/08/04 00:24:25 raeburn Exp $
# TYPICAL USAGE of this Makefile is primarily for two targets:
# "make build" and "make install".
# Many other targets and features are supported (see the initial
# help targets).
# ======================================= Default settings for Makefile options
DISTPROBE=`perl ./distprobe`
DIST=$(DISTPROBE)
CATEGORY="development"
SOURCE=../..
TARGET=""
CURRSHELL=`echo $(SHELL)`
ifneq ('/bin/bash',${CURRSHELL})
CURRSHELL=/bin/bash
endif
NORESTORECONF="0"
HOSTNAME=""
LAUNCH=| perl
QUERYLAUNCH=> /tmp/loncapa_query.pl; perl /tmp/loncapa_query.pl
OUTSTREAM=>
SAVE=program.pl.$(TIMESTAMP)
LAUNCHSAVE=$(OUTSTREAM) $(SAVE)
METAMTARGET=""
MTARGET=""
VERSION=CVS_HEAD
SHOWVERSION=$(VERSION)
NEXTVERSION=2.12
ifeq (CVS_HEAD,${VERSION})
SHOWVERSION=$(NEXTVERSION).$(VERSION)
endif
#
# The current working definition for "RELEASE" is: changes not in the software,
# but in the operating system dependent packaging of the software. Thus, the
# generic tarball releases do not need to have a release number specified.
RELEASE=1 # As a general rule for now, this is always being set to "1".
DIRTARGET=loncapa-$(VERSION)
LOCALAUTHPATH=/home/httpd/lib/perl
# =============================================== Help targets for the Makefile
# If 'make' is run without any arguments, the 'help' target is called since
# it is the first target.
help:
@echo "*** You need to specify a valid target ***"
@echo "To get a list of valid targets: \"make help_TARGETS\""
@echo "To get a list of valid options: \"make help_OPTIONS\""
@echo " "
@echo "Typically invoked targets are:"
@echo " make build"
@echo " make install"
@echo " make test"
@echo " make clean"
help_OPTIONS:
@echo "* ADJUSTABLE OPTIONS *"
@echo "(option) DIST can be centosN (N = 5, 6, 7 or 8), rhesN (N = 4, 5, 6, 7, 8 or 9),"
@echo " scientificN (N = 5, 6 or 7), oracleN (N = 6, 7, 8 or 9), rockyN (N = 8 or 9),"
@echo " almaN (N = 8 or 9), centosN-stream (N = 8 or 9),"
@echo " or slesN (N = 9, 10, 11, 12 or 15), or debianN (N = 5, 6, 10, 11 or 12),"
@echo " or ubuntuN (N= 6, 8, 10, 12, 14, 16, 18, 20, 22 or 24), or fedoraN (N = 1 .. 40),"
@echo " or suseN.M (N.M: 9.2 .. 13.2), or default."
@echo " It is unlikely you would ever need to specify this,"
@echo " as it is automatically probed for."
@echo "(option) CATEGORY can be 'runtime' or 'development'; currently"
@echo " the 'development' setting is the most reliable;"
@echo " eventually, production machines should be using the"
@echo " 'runtime' settings"
@echo "(option) SOURCE is an absolute or relative directory path."
@echo " SOURCE corresponds to the root directory of the"
@echo " loncapa source release"
@echo "(option) TARGET is an absolute or relative directory path."
@echo " This is where files will be installed on your system."
@echo " Typically, this should be set to nothing (which"
@echo " corresponds to the '/' root of the entire filesystem)."
@echo "(option) NORESTORECONF, when set to a non-zero value, stops"
@echo " filesystem upgrades from overwriting existing "
@echo " configuration files. Ordinarily, NORESTORECONF=0, "
@echo " because the existing configuration files are safely"
@echo " dealt with (or so one hopes... :) )."
@echo "(option) HOSTNAME specifies the name of a remote server for"
@echo " which a NET_* Makefile target should be launched"
@echo "(option) VERSION; especially useful for the 'tardist' target"
@echo " this tags the tarball file and internal directories"
@echo " with a specific version string (conventionally "
@echo " numeric)"
help_TARGETS:
@echo "*** RUNNING TESTS TO ENSURE SOLID PERFORMANCE ***"
@echo "test: test different parts of the LON-CAPA system (TEST_*)."
@echo " Makefile-dependent processes as well as horizontal and"
@echo " vertical aspects of the LON-CAPA system architecture"
@echo " are all tested."
@echo "TEST_lpml_scripts: make sure that the system can process"
@echo " the Linux Packaging Markup Language."
@echo " This is neither horizontal or vertical"
@echo " testing. The idea is to make sure that"
@echo " the installation software itself works"
@echo " as expected."
@echo "TEST_system_dependencies: make sure that all needed system "
@echo " components are active and present "
@echo " on the server such as perl modules"
@echo " and the MySQL database"
@echo " (horizontal testing)"
@echo "TEST_web_layer: mimic a login and various vertical actions on "
@echo " a LON-CAPA system"
@echo "TEST_hosts_and_domain_tab: make sure that a "
@echo " loncapa/loncom/hosts.tab and loncapa/loncom/domain.tab"
@echo " file is specified for installation"
@echo "TEST_html2ps: test for the presence of html2ps which is needed"
@echo " for making a PDF compilation for pdfdoc"
@echo "*** GENERAL TARGETS SUCH AS 'build' AND 'install' ***"
@echo "build: compile the source tree"
@echo "buildflag: a semaphore that helps educate the user to run"
@echo " 'make build' first before running 'make install'"
@echo "configinstall: install configuration files and restore with"
@echo " prior information"
@echo "install: install from a ***compiled*** source tree"
@echo " (see make build) to a specified TARGET destination"
@echo " on the filesystem (default setting is TARGET=/)."
@echo "rawinstall: just install files, links and directories without"
@echo " any bells or whistles (e.g. double-checking"
@echo " configurations, fine-tuning webserver, etc.)"
@echo "hosts_and_domain_tab: install the hosts.tab and domain.tab"
@echo " to the filesystem"
@echo "webserverconf: fine-tune the web server configuration;"
@echo " make sure the proper 'Include' statements"
@echo " are appended to httpd.conf"
@echo "vanillatar: generate top-level files such as README, UPDATE,"
@echo " CHECKRPMS, and TEST (needed by tardist)"
@echo "tardist: build a tarball that will upgrade the software on a "
@echo " system"
@echo "sanitycheck: probe for common errors and recommend fixes to"
@echo " the user"
@echo "logcleanup: clean spurious logfile entries"
@echo "clean_file_permissions: Remove erroneous keys from the "
@echo " file_permissions.db"
@echo "accesscount_seed: Migrate the access counting mechanism from "
@echo " nohist_reseval.db to nohist_accesscount.db."
@echo "modify_config_files: Perform automatic update of the "
@echo " configuration files for yum and MySQL."
@echo "langcheck: test to see if root bash and OS are using English."
@echo "ntpcheck: test to see if ntp is installed and running."
@echo "html_parser_check: test functionality of HTML::Parser."
@echo "math_random_check: test functionality of Math::Random."
@echo "cron_lpmlcheck: remove cron file /etc/cron.d/loncapa.lpml."
@echo "chkconfig: test runlevels of httpd and loncontrol."
@echo "rpmcheck: test to see if rpms known to confict are installed."
@echo "wrap_setuid: put a C wrapper around setuid scripts."
@echo "bash_config_check: test if enable-bracketed-paste set to on."
@echo "systemd_config_check: test if ProtectHome set to readonly."
@echo "latex_fixup: regenerate ls-R database for the latex base."
@echo "picins_check: check for picins.sty, retrieve and rebuild"
@echo " filename databases used by LaTeX"
@echo "mimetex_version_check: check if mimetex.cgi version has changed,"
@echo " if so remove files from mimetexcache."
@echo "latex_fmtutil: run utility to maintain TeX format files system-wide."
@echo "lcmathcomplex: set nvsize in LCMathComplex, if different from default."
@echo "removenolongerused: check if there are files from previous
@echo " LON-CAPA version; if so, prompt for removal."
@echo "updatequery: solicit the user for machine configuration"
@echo " information; to be incorporated during an update"
@echo " procedure (via the UPDATE command)"
@echo "postinstall: double-check things after installation"
@echo "VERSION: tag the filesystem with version information inside"
@echo " /etc/loncapa-release and"
@echo " /home/httpd/html/lon-status/version.txt"
@echo "aboutVERSION: place version information inside about.html"
@echo " and loncapa_apache.conf"
@echo "postaboutVERSION: restore default version <!-- VERSION --> to"
@echo " about.html and loncapa_apache.conf"
@echo "*** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***"
@echo "Makefile.configinstall: generate a Makefile for configuration"
@echo " files; built dynamically from"
@echo " loncapafiles.lpml"
@echo "Makefile.build: generate a Makefile for compiling"
@echo " files inside the source directory; "
@echo " Makefile.build is generated from"
@echo " loncapafiles.lpml"
@echo "Makefile.install: generate a Makefile for installing"
@echo " files; built dynamically from"
@echo " loncapafiles.lpml"
@echo "*** TARGETS FOR OPERATING ON FILESYSTEMS ACROSS THE NETWORK ***"
@echo "lpmladm: coordinates username=lpmladm mediated secure shell"
@echo " processes; needed for the NET_* targets"
@echo "NET_hosts_and_domain_tab: install the hosts.tab and domain.tab"
@echo " to a filesystem elsewhere"
@echo " on the network"
@echo "NET_webserverconf: fine-tune the web server configuration on a"
@echo " filesystem elsewhere on the network"
@echo "NET_rawinstall: launch the rawinstall target on a filesystem"
@echo " elsewhere on the network"
@echo "*** TARGETS FOR MAKING LISTS (MANIFESTS) OF LON-CAPA FILES ***"
@echo "MANIFEST_all: generate a list of all files to be included in"
@echo " the distributed tarball"
@echo "MANIFEST_cvs: essentially a list of all CVS/Entries files used"
@echo " for 'time-checking' intelligence"
@echo "MANIFEST_lpml: a list of all LON-CAPA files to be installed,"
@echo " compile from, used as building software, and"
@echo " testing"
@echo "MANIFEST_vanillatar: 'README'-type top-level files that a user"
@echo " of the distributed tarball would first"
@echo " look at and work with"
@echo "*** STATUS REPORT TARGETS ***"
@echo "warningnote: analyze the WARNINGS file and produce a synopsis"
@echo " and recommended action to the user"
@echo "HTML: generate an HTML-formatted description of the LON-CAPA"
@echo " source files"
@echo "status: compare the TARGET filesystem with a compiled loncapa "
@echo " source directory"
@echo "statuspost: post the results of "make status" to "
@echo " TARGET/home/httpd/html/lon-status/filestatus.html"
@echo "rpmstatus: compare the rpms on a system to defined lists "
@echo " loncapa/doc/otherfiles/cd_rpms and "
@echo " loncapa/doc/otherfiles/rpm_list.txt"
@echo "rpmstatuspost: post the results of 'make rpmstatus' to "
@echo " TARGET/home/httpd/html/lon-status/rpmstatus.html"
@echo "*** ALTERNATIVE PACKAGING TARGETS ***"
@echo "RPM: build LON-CAPA-base RPM from loncapa source repository"
@echo " (still under development)"
@echo "DPKG: build a loncapa Debian package from loncapa source"
@echo " repository (still under development)"
@echo "base_rpm_file_list: create a file listing to be used for"
@echo " generating an RPM software package"
@echo "BinaryRoot: create a BinaryRoot directory to be used for"
@echo " generating an RPM software package"
@echo "*** MASTER DOCUMENTATION TARGETS ***"
@echo "doc: generate web-page documentation for install.lon-capa.org"
@echo " (and eventually for documentation on installed machines)"
@echo "pdfdoc: make a PDF-formatted compilation of all installation"
@echo " documentation"
@echo "*** KEEPING THINGS CLEAN ***"
@echo "clean: remove any files that might (even by remote chance)"
@echo " interfere with rebuilding/recompiling software"
@echo "reallyclean: remove all files that were generated during"
@echo " building or compilation of the software"
@echo "uninstall: remove all directories that do not contain files"
@echo " from other software packages and that do not contain"
@echo " student and instructor data; NOTE THAT THIS IS"
@echo " INTERACTIVE--you will be given a final chance"
@echo " to look at what will and will not be deleted."
@echo " Still, be careful. This is a very new target and is"
@echo " an alpha-level software feature for now."
@echo "backup: rolls a tarball backup of all important student and "
@echo " instructor data (NOT YET IMPLEMENTED)"
@echo "restore: reseeds a LON-CAPA server with tarball backups "
@echo " generated by \"make backup\" (NOT YET IMPLEMENTED)"
@echo "*** AUXILIARY TESTS ***"
@echo "localauth: tests to see if localauth exists or not and run"
@echo " appropriate tests"
@echo "*** A HELPFUL DEPENDENCY ***"
@echo "alwaysrun: blank target that is a dependency for targets"
@echo " that should \"always run\""
# =========================== *** RUNNING TESTS TO ENSURE SOLID PERFORMANCE ***
test: TEST_lpml_scripts TEST_system_dependencies TEST_web_layer
@echo "ALL SYSTEM DEPENDENCY TESTS SUCCESSFUL"
TEST_system_dependencies:
@echo "TESTING SYSTEM DEPENDENCIES"
cd system_dependencies; make
TEST_lpml_scripts:
@echo "TESTING LPML INSTALLATION CODE"
cd ../test; perl filecomparetest.pl
TEST_web_layer:
@echo "TESTING WEB LAYER"
cd weblayer_test; make
TEST_hosts_tab:
@echo "Testing hosts.tab"
@if (test -e ../hosts.tab); then \
echo "there is a defined link or file; assume okay"; \
else echo "**** ERROR **** hosts.tab not defined!" && \
echo -n "You need to do one of the following within your " && \
echo "CVS repository (cd loncapa/loncom)" && \
echo " 1) ln -s production_hosts.tab hosts.tab" && \
echo " 2) ln -s development_hosts.tab hosts.tab" && \
echo "or 3) ln -s rawhide_hosts.tab hosts.tab" && \
echo "(you most likely want option #1, production_hosts.tab)" && \
echo " and also one of the following within your " && \
echo "CVS repository (cd loncapa/loncom)" && \
echo " 1) ln -s production_dns_hosts.tab dns_hosts.tab" && \
echo " 2) ln -s development_dns_hosts.tab dns_hosts.tab" && \
echo "(you most likely want option #1, production_dns_hosts.tab)" && \
exit 1; \
fi
TEST_domain_tab:
@echo "Testing domain.tab"
@if (test -e ../domain.tab); then \
echo "there is a defined link or file; assume okay"; \
else echo "**** ERROR **** domain.tab not defined!" && \
echo -n "You need to do one of the following within your " && \
echo "CVS repository (cd loncapa/loncom)" && \
echo " 1) ln -s production_domain.tab domain.tab" && \
echo " 2) ln -s development_domain.tab domain.tab" && \
echo "or 3) ln -s rawhide_domain.tab domain.tab" && \
echo "(you most likely want option #1, production_domain.tab)" && \
echo " and also one of the following within your " && \
echo "CVS repository (cd loncapa/loncom)" && \
echo " 1) ln -s production_dns_domain.tab dns_domain.tab" && \
echo " 2) ln -s development_dns_domain.tab dns_domain.tab" && \
echo "(you most likely want option #1, production_dns_domain.tab)" && \
exit 1; \
fi
TEST_html2ps:
@if (test -e /usr/local/html2ps/bin/html2ps); then \
echo "I can find html2ps; assume okay"; \
else \
echo "**** ERROR **** cannot find /usr/local/html2ps/bin/html2ps!" && \
echo "Please visit http://www.tdb.uu.se/~jan/html2ps.html" && \
exit 1; \
fi
# ======================= *** GENERAL TARGETS SUCH AS 'build' AND 'install' ***
build: Makefile.build pod2html.sh pod2man.sh
install -d $(SOURCE)/doc/man
install -d $(SOURCE)/doc/scripts
install -d $(SOURCE)/doc/lib/perl/Apache
echo -n "" > WARNINGS
make -f Makefile.build all
echo '1' > buildflag
make warningnote
buildflag:
@echo "**** ERROR **** You need to run 'make build' first" > WARNINGS
make warningnote
@need_to_run_make_build_first 2>/dev/null
configinstall: Makefile.configinstall
make -f Makefile.configinstall SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
configfiles
if (test "0" = $(NORESTORECONF)); then \
perl loncaparestoreconfigurations suffix .lpmlnew; fi
install: buildflag VERSION TEST_hosts_tab TEST_domain_tab Makefile.install Makefile
echo -n "" > WARNINGS
make aboutVERSION
make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
directories
make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" files
make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" links
make SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
NORESTORECONF="$(NORESTORECONF)" configinstall
make postinstall
make warningnote
# @echo "You can now run 'make test' to see if your system is ready to go!"
# @echo "NOTE THAT YOUR SYSTEM MUST HAVE MYSQL WITH A USER=\"www\" AND"
# @echo -n "PASSWORD=\"localhostkey\" FOR www\@localhost"
# @echo -n "(YOU MAY NEED TO REINITIALIZE YOUR MYSQL www\@localhost USER)"
# @echo -n "Please see http://install.lon-capa.org/ for more information"
rawinstall: VERSION Makefile.install Makefile
echo -n "" > WARNINGS
make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
directories
make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" files
make -f Makefile.install SOURCE="$(SOURCE)" TARGET="$(TARGET)" links
make SOURCE="$(SOURCE)" TARGET="$(TARGET)" \
NORESTORECONF="$(NORESTORECONF)" configinstall
hosts_and_domain_tab: TEST_hosts_tab TEST_domain_tab
cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
perl xfml_parse.pl $(SOURCE)/doc/loncapafiles/valid_hosts.xfml | \
perl lpml_parse.pl install $(CATEGORY) $(DIST) "$(SOURCE)" \
"$(TARGET)" > Makefile.install
make -f Makefile.install directories
make -f Makefile.install files
@echo "If hosts.tab or domain.tab has changed, restart the web server and loncontrol:"
@echo " service httpd restart, or if that is unavailable on your Linux distro:"
@echo " service apache2 restart"
@echo " /home/httpd/perl/loncontrol restart, or if that is unavailable on your Linux distro:"
@echo " /etc/init.d/loncontrol restart"
webserverconf:
cat $(SOURCE)/doc/loncapafiles/webserver.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
# ---------------- Top-level files such as README, UPDATE, CHECKRPMS, and TEST
vanillatar:
# --------------------------- Point UPDATE to the internal make process
cp $(SOURCE)/loncom/UPDATE $(SOURCE)/UPDATE
# ----------------------------- Point TEST to the internal make process
echo '#!/bin/sh' > $(SOURCE)/TEST
echo 'cd loncom/build; make test' >> $(SOURCE)/TEST
echo 'cd system_dependencies || cd loncom/build/system_dependencies; cp -v CPAN_STATUS_REPORT ../../../CPAN_STATUS_REPORT' >> $(SOURCE)/TEST
# ----------------------------- Copy CHECKRPMS to the vanilla top-level
cp -v $(SOURCE)/loncom/build/CHECKRPMS $(SOURCE)/CHECKRPMS
# ----------------------- vanilla executables must indeed be executable
chmod a+rx $(SOURCE)/UPDATE
chmod a+rx $(SOURCE)/TEST
chmod a+rx $(SOURCE)/CHECKRPMS
# -------------------------------- Copy README to the vanilla top-level
#cp -v $(SOURCE)/doc/shortest_path_redhat7.2.txt $(SOURCE)/README
tardist:
make MANIFEST_all
make vanillatar
# -------------------------------------------------------- Make tardist
@cd $(SOURCE); \
if (test -h $(DIRTARGET)); then \
echo "$(DIRTARGET) link already defined; assume okay"; \
else \
ln -s . $(DIRTARGET); \
fi
make aboutVERSION
cd $(SOURCE); \
tar --no-recursion --numeric-owner --files-from MANIFEST \
-h -czf $(DIRTARGET).tar.gz 2>tar_WARNINGS || [ "0" == "0" ]
make postaboutVERSION
cat $(SOURCE)/tar_WARNINGS | \
xargs --replace=XXX echo '**** WARNING **** XXX' > WARNINGS
rm -f $(SOURCE)/tar_WARNINGS
make warningnote
langcheck:
cat $(SOURCE)/doc/loncapafiles/langcheck.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
ntpcheck:
cat $(SOURCE)/doc/loncapafiles/ntpcheck.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
html_parser_check:
cat $(SOURCE)/doc/loncapafiles/html_parser_check.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
math_random_check:
cat $(SOURCE)/doc/loncapafiles/math_random_check.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
cron_lpmlcheck:
cat $(SOURCE)/doc/loncapafiles/cron_lpmlcheck.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
chkconfig:
cat $(SOURCE)/doc/loncapafiles/chkconfig.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
rpmcheck:
cat $(SOURCE)/doc/loncapafiles/rpmcheck.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
sanitycheck:
cat $(SOURCE)/doc/loncapafiles/sanitycheck.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
logcleanup:
cat $(SOURCE)/doc/loncapafiles/logcleanup.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
updatequery:
cat $(SOURCE)/doc/loncapafiles/updatequery.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(QUERYLAUNCH)
run_searchcat:
cat $(SOURCE)/doc/loncapafiles/run_searchcat.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(QUERYLAUNCH)
clean_file_permissions:
cat $(SOURCE)/doc/loncapafiles/clean_file_permissions.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
accesscount_seed:
cat $(SOURCE)/doc/loncapafiles/accesscount_seed.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
modify_config_files:
cat $(SOURCE)/doc/loncapafiles/modify_config_files.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
reseval_fixup:
cat $(SOURCE)/doc/loncapafiles/reseval_fixup.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
update_queue_slots:
cat $(SOURCE)/doc/loncapafiles/update_queue_slots.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
clearoutoldspreadsheetcache:
cat $(SOURCE)/doc/loncapafiles/clearoutoldspreadsheetcache.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
sendmail_fix:
cat $(SOURCE)/doc/loncapafiles/sendmail_fix.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
ownership_fix:
cat $(SOURCE)/doc/loncapafiles/ownership_fix.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
wrap_setuid:
cat $(SOURCE)/doc/loncapafiles/wrap_setuid.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
latex_fixup:
cat $(SOURCE)/doc/loncapafiles/latex_fixup.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
picins_check:
cat $(SOURCE)/doc/loncapafiles/picins_check.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
mimetex_version_check:
cat $(SOURCE)/doc/loncapafiles/mimetex_version_check.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
verify_domconfiguser:
cat $(SOURCE)/doc/loncapafiles/verify_domconfiguser.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
latex_fmtutil:
cat $(SOURCE)/doc/loncapafiles/latex_fmtutil.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
lcmathcomplex:
cat $(SOURCE)/doc/loncapafiles/lcmathcomplex.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
removenolongerused:
cat $(SOURCE)/doc/loncapafiles/removenolongerused.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(QUERYLAUNCH)
bash_config_check:
cat $(SOURCE)/doc/loncapafiles/bash_config_check.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
systemd_config_check:
cat $(SOURCE)/doc/loncapafiles/systemd_config_check.piml | \
perl piml_parse.pl $(CATEGORY) $(DIST) "$(TARGET)" $(LAUNCH) | \
tee -a WARNINGS
postinstall:
make postaboutVERSION
make webserverconf
make reseval_fixup
make clean_file_permissions
make accesscount_seed
make update_queue_slots
make modify_config_files
make clearoutoldspreadsheetcache
make langcheck
make chkconfig
make rpmcheck
make ntpcheck
make html_parser_check
make cron_lpmlcheck
make sanitycheck
make logcleanup
make sendmail_fix
make wrap_setuid
make latex_fixup
make picins_check
make mimetex_version_check
make verify_domconfiguser
make bash_config_check
make systemd_config_check
make latex_fmtutil
make lcmathcomplex
sed -i "s/\x08\x08*/.../g" WARNINGS
VERSION:
install -d $(TARGET)/etc
if (test -e /etc/loncapa-release); then \
cp -p -v /etc/loncapa-release /etc/loncapa-release.prev; \
fi
echo -n "LON-CAPA release $(VERSION)-" > $(TARGET)/etc/loncapa-release
date +"%Y%m%d" >> $(TARGET)/etc/loncapa-release
install -d $(TARGET)/home/httpd/html/lon-status
echo -n "$(VERSION)-" > $(TARGET)/home/httpd/html/lon-status/version.txt
date +"%Y%m%d" >> $(TARGET)/home/httpd/html/lon-status/version.txt
aboutVERSION:
cp -p -v $(SOURCE)/loncom/license/about.html \
$(SOURCE)/loncom/license/about.html.orig
cat $(SOURCE)/loncom/license/about.html | \
perl -e '$$d=`date +"%Y%m%d%H"`;chomp($$d);while(<>){s/(\<\!\-\- VERSION \-\-\>|\d+\.\d+\.CVS_HEAD\-\d{10})/$(SHOWVERSION)-$$d/; print;}' > \
$(SOURCE)/loncom/license/about.html.new
mv -v $(SOURCE)/loncom/license/about.html.new \
$(SOURCE)/loncom/license/about.html
touch --date="$(shell echo `perl getcvsdate.pl \
$(SOURCE)/loncom/license/CVS/Entries about.html`)" \
$(SOURCE)/loncom/license/about.html
cp -p -v $(SOURCE)/loncom/loncapa_apache.conf \
$(SOURCE)/loncom/loncapa_apache.conf.orig
cat $(SOURCE)/loncom/loncapa_apache.conf | \
perl -e '$$d=`date +"%Y%m%d%H"`;chomp($$d);while(<>){s/(\<\!\-\- VERSION \-\-\>|\d+\.\d+\.CVS_HEAD\-\d{10})/$(SHOWVERSION)-$$d/; print;}' > \
$(SOURCE)/loncom/loncapa_apache.conf.new
mv -v $(SOURCE)/loncom/loncapa_apache.conf.new \
$(SOURCE)/loncom/loncapa_apache.conf
touch --date="$(shell echo `perl getcvsdate.pl \
$(SOURCE)/loncom/CVS/Entries loncapa_apache.conf`)" \
$(SOURCE)/loncom/loncapa_apache.conf
postaboutVERSION:
if (test -e $(SOURCE)/loncom/license/about.html.orig) && \
(diff $(SOURCE)/loncom/license/about.html.orig \
$(SOURCE)/loncom/license/about.html > /dev/null); then \
mv -v $(SOURCE)/loncom/license/about.html.orig \
$(SOURCE)/loncom/license/about.html; \
elif (test -e $(SOURCE)/loncom/license/about.html.orig) && \
!(diff $(SOURCE)/loncom/license/about.html.orig \
$(SOURCE)/loncom/license/about.html > /dev/null); then \
rm -f $(SOURCE)/loncom/license/about.html.orig; \
fi
touch --date="$(shell echo `perl getcvsdate.pl \
$(SOURCE)/loncom/license/CVS/Entries about.html`)" \
$(SOURCE)/loncom/license/about.html
if (test -e $(SOURCE)/loncom/loncapa_apache.conf.orig) && \
(diff $(SOURCE)/loncom/loncapa_apache.conf.orig \
$(SOURCE)/loncom/loncapa_apache.conf > /dev/null); then \
mv -v $(SOURCE)/loncom/loncapa_apache.conf.orig \
$(SOURCE)/loncom/loncapa_apache.conf; \
elif (test -e $(SOURCE)/loncom/loncapa_apache.conf.orig) && \
!(diff $(SOURCE)/loncom/loncapa_apache.conf.orig \
$(SOURCE)/loncom/loncapa_apache.conf > /dev/null); then \
rm -f $(SOURCE)/loncom/loncapa_apache.conf.orig; \
fi
touch --date="$(shell echo `perl getcvsdate.pl \
$(SOURCE)/loncom/CVS/Entries loncapa_apache.conf`)" \
$(SOURCE)/loncom/loncapa_apache.conf
# ========= *** Makefile.* TARGETS BUILT DYNAMICALLY FROM loncapafiles.lpml ***
Makefile.configinstall: $(SOURCE)/doc/loncapafiles/loncapafiles.lpml \
lpml_parse.pl
cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
perl lpml_parse.pl configinstall $(CATEGORY) $(DIST) "$(SOURCE)" \
"$(TARGET)" > Makefile.configinstall
Makefile.build: $(SOURCE)/doc/loncapafiles/loncapafiles.lpml lpml_parse.pl
cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
perl lpml_parse.pl build $(CATEGORY) $(DIST) "$(SOURCE)" "$(TARGET)" \
"$(CURRSHELL)" > Makefile.build
Makefile.install: alwaysrun
cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
perl lpml_parse.pl install $(CATEGORY) $(DIST) "$(SOURCE)" \
"$(TARGET)" "$(CURRSHELL)" > Makefile.install
# ============= *** TARGETS FOR OPERATING ON FILESYSTEMS ACROSS THE NETWORK ***
lpmladm:
@if (test $(METAMTARGET) = "TRANSPORT"); then \
echo "Transporting to $(HOSTNAME)"; \
sudo make DIST=$(DIST) CATEGORY=$(CATEGORY) \
SOURCE="$(SOURCE)" \
TARGET="lpmladm.$(TIMESTAMP)" \
NORESTORECONF="$(NORESTORECONF)" "$(MTARGET)"; \
cd lpmladm.$(TIMESTAMP); \
sudo tar czvf ../tarball$(TIMESTAMP).tar.gz .; \
cd ..; scp tarball$(TIMESTAMP).tar.gz \
lpmladm@$(HOSTNAME):~/tarball$(TIMESTAMP).tar.gz; \
ssh lpmladm@$(HOSTNAME) sudo mv tarball$(TIMESTAMP).tar.gz /; \
ssh lpmladm@$(HOSTNAME) sudo tar -x -z -v -C / \
-p --same-owner -f \
/tarball$(TIMESTAMP).tar.gz; \
ssh lpmladm@$(HOSTNAME) sudo rm -f \
/tarball$(TIMESTAMP).tar.gz; \
elif (test $(METAMTARGET) = "LAUNCH"); then \
echo "Launching process on $(HOSTNAME)"; \
LAUNCHSAVE=$(OUTSTREAM) $(SAVE); \
make DIST=$(DIST) CATEGORY=$(CATEGORY) SOURCE="$(SOURCE)" \
TARGET="$(TARGET)" NORESTORECONF="$(NORESTORECONF)" \
LAUNCH="$(LAUNCHSAVE)" "$(MTARGET)"; \
scp $(SAVE) lpmladm@$(HOSTNAME):~/$(SAVE); \
ssh lpmladm@$(HOSTNAME) sudo perl $(SAVE); \
ssh lpmladm@$(HOSTNAME) sudo rm -f $(SAVE); \
else \
echo "**** ERROR **** Incorrect METAMTARGET"; \
fi
NET_hosts_and_domain_tab:
make TIMESTAMP=`date +"%s"` METAMTARGET="TRANSPORT" \
MTARGET="hosts_and_domain_tab" HOSTNAME="$(HOSTNAME)" lpmladm
NET_webserverconf:
make TIMESTAMP=`date +"%s"` METAMTARGET="LAUNCH" \
MTARGET="webserverconf" HOSTNAME="$(HOSTNAME)" lpmladm
NET_rawinstall:
make TIMESTAMP=`date +"%s"` METAMTARGET="TRANSPORT" \
MTARGET="rawinstall" HOSTNAME="$(HOSTNAME)" lpmladm
# ============== *** TARGETS FOR MAKING LISTS (MANIFESTS) OF LON-CAPA FILES ***
MANIFEST_all:
# --------------------------------------------------------- start clean
rm -f $(SOURCE)/MANIFEST
make MANIFEST_lpml
make MANIFEST_vanillatar
make MANIFEST_cvs
# ---------------------------------- might as well include the MANIFEST
echo 'MANIFEST' >> $(SOURCE)/MANIFEST
# ------------------------------------------ hosts.tab are belong to us
echo 'loncom/rawhide_hosts.tab' >> $(SOURCE)/MANIFEST
echo 'loncom/production_hosts.tab' >> $(SOURCE)/MANIFEST
echo 'loncom/development_hosts.tab' >> $(SOURCE)/MANIFEST
echo 'loncom/production_domain.tab' >> $(SOURCE)/MANIFEST
echo 'loncom/development_domain.tab' >> $(SOURCE)/MANIFEST
echo 'loncom/production_dns_hosts.tab' >> $(SOURCE)/MANIFEST
echo 'loncom/development_dns_hosts.tab' >> $(SOURCE)/MANIFEST
echo 'loncom/production_dns_domain.tab' >> $(SOURCE)/MANIFEST
echo 'loncom/development_dns_domain.tab' >> $(SOURCE)/MANIFEST
# ------------------ Files needed for dynamically generated directories
echo 'doc/man' >> $(SOURCE)/MANIFEST
echo 'doc/lib' >> $(SOURCE)/MANIFEST
echo 'doc/lib/perl' >> $(SOURCE)/MANIFEST
echo 'doc/lib/perl/Apache' >> $(SOURCE)/MANIFEST
echo 'doc/scripts' >> $(SOURCE)/MANIFEST
# --------------------------------------------------- Clean up MANIFEST
cd $(SOURCE); \
sort MANIFEST | perl -nle 'print "$(DIRTARGET)/$$_"' | \
perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
perl -nle 's/\w+\/\.\.\///g;s/\w+\/\.\.\///g;print' | \
perl -nle 's/\/\.\//\//g;print' | sort | uniq > \
MANIFEST_loncapa
cd $(SOURCE); mv -v MANIFEST_loncapa MANIFEST
# --------------- MANIFEST files with important CVS versioning/date information
MANIFEST_cvs:
# ------ CVS/Entries directories to retain 'time-checking' intelligence
cd $(SOURCE); find . -type f -name 'Entries' | grep 'CVS/Entries' >> \
MANIFEST
# ------------------- MANIFEST the building, testing and standard loncapa files
MANIFEST_lpml:
cat $(SOURCE)/doc/loncapafiles/buildfiles.lpml | \
perl lpml_parse.pl MANIFEST development $(DIST) \
'$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
cat $(SOURCE)/doc/loncapafiles/testfiles.lpml | \
perl lpml_parse.pl MANIFEST development $(DIST) \
'$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
cat $(SOURCE)/doc/loncapafiles/installfiles.lpml | \
perl lpml_parse.pl MANIFEST development $(DIST) \
'$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
perl lpml_parse.pl MANIFEST development $(DIST) \
'$(SOURCE)' '$(TARGET)' | grep '[[:alnum:]]' >> $(SOURCE)/MANIFEST
# ------------ Files for top-level (the vanilla layer that the user first sees)
MANIFEST_vanillatar:
echo 'README' >> $(SOURCE)/MANIFEST
echo 'UPDATE' >> $(SOURCE)/MANIFEST
echo 'TEST' >> $(SOURCE)/MANIFEST
echo 'CHECKRPMS' >> $(SOURCE)/MANIFEST
# =============================================== *** STATUS REPORT TARGETS ***
warningnote:
@if (test -s WARNINGS); then \
W=`grep -c '\*\*\*\* WARNING' WARNINGS`; \
E=`grep -c '\*\*\*\* ERROR' WARNINGS`; \
N=`grep -c '\*\*\*\* NOTE' WARNINGS`; \
echo "---> $$W WARNINGS ENCOUNTERED! "; \
echo "---> $$E ERRORS ENCOUNTERED! "; \
echo "---> $$N NOTES ENCOUNTERED! "; \
echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"; \
echo "!!!! Please read the WARNINGS file !!!!"; \
echo "!!!! to make sure everything is !!!!"; \
echo "!!!! correct and taken care of !!!!"; \
echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"; \
fi
HTML:
install -d HTML
cp $(SOURCE)/doc/loncapafiles/*.gif HTML
cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
perl lpml_parse.pl html development default "$(SOURCE)" '$(TARGET)' \
> HTML/index.html
status:
install -d HTML
cp $(SOURCE)/doc/loncapafiles/*.gif HTML
cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
perl lpml_parse.pl html $(CATEGORY) $(DIST) "$(SOURCE)" "($TARGET)" | \
perl lpml_html_posteval.pl > \
HTML/filestatus.html
statuspost: status
cp $(SOURCE)/doc/loncapafiles/*.gif \
$(TARGET)/home/httpd/html/lon-status
cp HTML/filestatus.html \
$(TARGET)/home/httpd/html/lon-status/filestatus.html
rpmstatus:
install -d RPMSTATUS
rpm -qa --queryformat \
'%{NAME}\t%{VERSION}\t%{RELEASE}\t%{BUILDTIME}\n' | sort > \
RPMSTATUS/current.tmp
cat $(SOURCE)/doc/otherfiles/cd_rpms.txt > RPMSTATUS/standard.tmp
cat $(SOURCE)/doc/otherfiles/rpm_list.txt > RPMSTATUS/expected.tmp
perl rpmparse.pl RPMSTATUS/standard.tmp RPMSTATUS/current.tmp \
RPMSTATUS/expected.tmp > RPMSTATUS/rpmstatus.html
rpmstatuspost: rpmstatus
cp RPMSTATUS/rpmstatus.html /home/httpd/html/lon-status/rpmstatus.html
# ======================================= *** ALTERNATIVE PACKAGING TARGETS ***
RPM: BinaryRoot base_rpm_file_list
cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
perl lpml_parse.pl make_rpm $(CATEGORY) $(DIST) $(SOURCE) $(TARGET) \
> base_customizerpm.xml
cat base_rpm_file_list.txt | perl make_rpm.pl base $(VERSION) \
$(RELEASE) '' '' BinaryRoot base_customizerpm.xml
DPKG:
make TARGET='lon-capa-$(VERSION)' NORESTORECONF='1' install
@echo "You will next need to follow instructions at:"
@echo "http://people.debian.org/~jaldhar/make_package1.html"
@echo "A directory with a snapshot of the debian package files"
@echo "is LON-CAPA-base."
# What DPKG steps need to happen (for future implementation):
# export EMAIL="" ... probably sharrison@mail.lon-capa.org
# deb-make
# edit debian/control
# make debian/dirs file
# make debian/copyright file
# debian/README.debian... point them to LON-CAPA URLS
# debian/changelog
# debian/conffiles
# debuild
# and maybe do some GPG-related steps around here
base_rpm_file_list:
cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
perl lpml_parse.pl rpm_file_list $(CATEGORY) $(DIST) $(SOURCE) \
'BinaryRoot' | sort > base_rpm_file_list.txt
BinaryRoot: base_rpm_file_list
make TARGET='BinaryRoot' NORESTORECONF='1' install
# ======================================== *** MASTER DOCUMENTATION TARGETS ***
buildwebsite:
cd ../../doc/build; perl ./generate_web_pages.pl
# Generates CVS:loncom/build/docs; root location of install.lon-capa.org
doc:
install -d docs
@if (test -e installation_manual.pdf); then \
cp -vf installation_manual.pdf docs/.; \
else \
touch docs/installation_manual.pdf; \
fi
install -m 0755 -d docs/icons
install -m 0644 $(SOURCE)/doc/icons/[^C][^V]* docs/icons
install -m 0755 -d docs/reconfig
cd docs; ln -fs installation_manual.pdf index.pdf
cd docs/reconfig; ln -fs ../installation_manual.pdf index.pdf
perl doc_template.pl $(SOURCE)/doc/templates/template.html \
$(SOURCE)/doc/build/reconfig.html > docs/reconfig/index.html
install -m 0755 -d docs/reconfig/confexamples
install -m 0644 $(SOURCE)/doc/build/confexamples/[^C][^V]* \
docs/reconfig/confexamples
perl doc_template.pl $(SOURCE)/doc/templates/template.html \
$(SOURCE)/doc/build/installindex.html > docs/index.html
install -m 0755 -d docs/license
cd docs/license; ln -fs ../installation_manual.pdf index.pdf
perl doc_template.pl $(SOURCE)/doc/templates/template.html \
$(SOURCE)/doc/build/license.html > docs/license/index.html
install -m 0755 -d docs/contact
cd docs/contact; ln -fs ../installation_manual.pdf index.pdf
perl doc_template.pl $(SOURCE)/doc/templates/template.html \
$(SOURCE)/doc/build/contact.html > docs/contact/index.html
install -m 0755 -d docs/faq
cd docs/faq; ln -fs ../installation_manual.pdf index.pdf
perl doc_template.pl $(SOURCE)/doc/templates/template.html \
$(SOURCE)/doc/build/faq.html > docs/faq/index.html
install -m 0755 -d docs/downloads
cd docs/downloads; ln -fs ../installation_manual.pdf download.pdf
perl doc_template.pl $(SOURCE)/doc/templates/template.html \
$(SOURCE)/doc/build/download.html > docs/downloads/index.html
install -m 0755 -d docs/install
cd docs/install; ln -fs ../installation_manual.pdf install.pdf
perl doc_template.pl $(SOURCE)/doc/templates/template.html \
$(SOURCE)/doc/build/install.html > docs/install/index.html
cp -v $(SOURCE)/doc/install/redhat7.3/new_install_rh73.html \
docs/install/rh73.html
cp -v $(SOURCE)/doc/install/redhat7.3/new_install_rh73.html \
docs/downloads/rh73.html
install -m 0755 -d docs/upgrade
cd docs/upgrade; ln -fs ../installation_manual.pdf upgrade.pdf
perl doc_template.pl $(SOURCE)/doc/templates/template.html \
$(SOURCE)/doc/build/upgrade.html > docs/upgrade/index.html
cd docs; tar czvpf ../docs.tar.gz .
pdfdoc: TEST_html2ps
install -d pdfdoc
/usr/local/html2ps/bin/html2ps -D \
$(SOURCE)/doc/build/installindex_noform.html > pdfdoc/installindex.ps
/usr/local/html2ps/bin/html2ps -D \
$(SOURCE)/doc/build/reconfig.html | \
perl -nle 's/\[EXAMPLE\]/\[EXAMPLE \(at end of document\)\]/g;print' \
> pdfdoc/reconfig.ps
/usr/local/html2ps/bin/html2ps -D \
$(SOURCE)/doc/build/install.html > pdfdoc/install.ps
/usr/local/html2ps/bin/html2ps -D \
$(SOURCE)/doc/build/upgrade.html > pdfdoc/upgrade.ps
/usr/local/html2ps/bin/html2ps -D \
$(SOURCE)/doc/build/faq.html > pdfdoc/faq.ps
/usr/local/html2ps/bin/html2ps -D \
$(SOURCE)/doc/build/download.html > pdfdoc/download.ps
/usr/local/html2ps/bin/html2ps -D \
$(SOURCE)/doc/build/contact.html > pdfdoc/contact.ps
/usr/local/html2ps/bin/html2ps -D \
$(SOURCE)/doc/build/license.html > pdfdoc/license.ps
# This creates a bad confexamples.ps... so take the long way around
# cd $(SOURCE)/doc/build/confexamples; \
# mpage -P- -1 -H [^C]* > ../../../loncom/build/pdfdoc/confexamples.ps
install -d pdfdoc/confexamples
cd $(SOURCE)/doc/build/confexamples; \
find . -type f | cut -b3- | grep -v '^C' | grep -v 'keyword' | \
perl -nle \
'`mpage -P- -1 -H $$_ > ../../../loncom/build/pdfdoc/confexamples/$$_.ps`;'
echo '' > pdfdoc/contents.txt
echo '' >> pdfdoc/contents.txt
echo ' The Learning Online Network' >> pdfdoc/contents.txt
echo ' with the' >> pdfdoc/contents.txt
echo ' Computer-Assisted Personalized Approach' >> \
pdfdoc/contents.txt
echo '' >> pdfdoc/contents.txt
echo '' >> pdfdoc/contents.txt
echo 'CONTENTS' >> pdfdoc/contents.txt
echo '--------' >> pdfdoc/contents.txt
echo 'Opening' >> pdfdoc/contents.txt
echo 'Configuration' >> pdfdoc/contents.txt
echo 'Installation' >> pdfdoc/contents.txt
echo 'Upgrading a LON-CAPA Server' >> pdfdoc/contents.txt
echo 'FAQ' >> pdfdoc/contents.txt
echo 'Download' >> pdfdoc/contents.txt
echo 'Contact Information' >> pdfdoc/contents.txt
echo 'License Information' >> pdfdoc/contents.txt
echo 'Configuration Examples' >> pdfdoc/contents.txt
mpage -P- -1 \
pdfdoc/contents.txt \
pdfdoc/installindex.ps \
pdfdoc/reconfig.ps \
pdfdoc/install.ps \
pdfdoc/upgrade.ps \
pdfdoc/faq.ps \
pdfdoc/download.ps \
pdfdoc/contact.ps \
pdfdoc/license.ps \
pdfdoc/confexamples/*.ps \
> pdfdoc/installation_manual.ps
ps2pdf pdfdoc/installation_manual.ps pdfdoc/installation_manual.pdf
mv -vf pdfdoc/installation_manual.pdf .
# ================================================ *** KEEPING THINGS CLEAN ***
clean:
rm -f buildflag
rm -Rf HTML
rm -f installation_manual.pdf
rm -f Makefile.build
rm -f Makefile.install
rm -f Makefile.configinstall
rm -Rf BinaryRoot
rm -Rf SetupBinaryRoot
rm -Rf LON-CAPA-base
rm -f base_rpm_file_list.txt
rm -f base_customizerpm.xml
rm -f setup_rpm_file_list.txt
rm -f docs.tar.gz
rm -Rf docs
rm -Rf pdfdoc
rm -f program.pl*
rm -Rf lpmladm.*
rm -f WARNINGS
rm -f CPAN_STATUS_REPORT
rm -f $(SOURCE)/loncom/build/hosts.tab
reallyclean:
rm -f buildflag
rm -f $(SOURCE)/README
rm -f $(SOURCE)/UPDATE
rm -f $(SOURCE)/TEST
rm -f $(SOURCE)/MANIFEST
rm -f $(SOURCE)/MANIFEST_loncapa
rm -f $(SOURCE)/loncapa
rm -f $(SOURCE)/loncom/build/hosts.tab
rm -f $(SOURCE)/loncapa.tar.gz
rm -Rf HTML
rm -f installation_manual.pdf
rm -f Makefile.build
rm -f Makefile.install
rm -f Makefile.configinstall
rm -Rf BinaryRoot
rm -Rf SetupBinaryRoot
rm -Rf LON-CAPA-base
rm -f base_rpm_file_list.txt
rm -f base_customizerpm.xml
rm -f setup_rpm_file_list.txt
rm -f docs.tar.gz
rm -Rf docs
rm -Rf pdfdoc
rm -f program.pl*
rm -Rf lpmladm.*
make -f Makefile.cvs clean
rm -f WARNINGS
uninstall:
rm -f UNINSTALL_SHELL_COMMANDS
cat $(SOURCE)/doc/loncapafiles/loncapafiles.lpml | \
perl lpml_parse.pl uninstall_shell_commands $(CATEGORY) $(DIST) \
"$(SOURCE)" "$(TARGET)" > UNINSTALL_SHELL_COMMANDS
@echo -n "**** NOTE **** A file \"UNINSTALL_SHELL_COMMANDS\" has been "
@echo "generated."
@echo "First, you should view the contents of this file."
@echo "If you are happy with the 'rm -Rf'! commands (or at least"
@echo "have another job lined up in case of catastrophe), then you "
@echo "can execute the following: sh ./UNINSTALL_SHELL_COMMANDS"
backup:
@echo "Not yet implemented"
restore:
@echo "Not yet implemented"
# ===================================================== *** AUXILIARY TESTS ***
localauth:
@if (test -e $(LOCALAUTHPATH)/localauth.pm) && \
!(diff $(LOCALAUTHPATH)/localauth-std.pm \
$(LOCALAUTHPATH)/localauth.pm > /dev/null); then \
echo "**** WARNING **** $(LOCALAUTHPATH)/localauth.pm is different than the $(LOCALAUTHPATH)/localauth-std.pm; if you have not customized localauth.pm, then please manually overwrite localauth.pm (rm $(LOCALAUTHPATH)/localauth.pm; ln -s $(LOCALAUTHPATH)/localauth-std.pm $(LOCALAUTHPATH)/localauth.pm); if you have customized localauth.pm, then please double-check to see that your customized localauth.pm is compatible with any localauth-std.pm changes for this version of LON-CAPA"| tee -a WARNINGS; \
elif (test -e $(LOCALAUTHPATH)/localauth.pm) && \
(diff $(LOCALAUTHPATH)/localauth-std.pm \
$(LOCALAUTHPATH)/localauth.pm > /dev/null); then \
echo "**** NOTE **** LOCAL AUTH IS IDENTICAL WITH STANDARD TEMPLATE"| tee -a WARNINGS; \
elif !(test -e $(LOCALAUTHPATH)/localauth.pm) && \
(test -e $(LOCALAUTHPATH)/localauth-std.pm); then \
ln -s $(LOCALAUTHPATH)/localauth-std.pm $(LOCALAUTHPATH)/localauth.pm; \
fi
# ================================================ *** A HELPFUL DEPENDENCY ***
alwaysrun:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to Makefile CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / loncom / build