--- loncom/build/lpml_parse.pl 2002/01/31 15:04:46 1.37 +++ loncom/build/lpml_parse.pl 2003/09/11 22:01:48 1.52 @@ -1,11 +1,20 @@ #!/usr/bin/perl +# -------------------------------------------------------- Documentation notice +# Run "perldoc ./lpml_parse.pl" in order to best view the software +# documentation internalized in this program. + +# --------------------------------------------------------- Distribution notice +# This script is distributed with the LPML software project available at +# http://lpml.sourceforge.net + +# --------------------------------------------------------- License Information # The LearningOnline Network with CAPA # lpml_parse.pl - Linux Packaging Markup Language parser # -# $Id: lpml_parse.pl,v 1.37 2002/01/31 15:04:46 harris41 Exp $ +# $Id: lpml_parse.pl,v 1.52 2003/09/11 22:01:48 albertel Exp $ # -# Written by Scott Harrison, harris41@msu.edu +# Written by Scott Harrison, codeharrison@yahoo.com # # Copyright Michigan State University Board of Trustees # @@ -37,7 +46,8 @@ # 11/4,11/5,11/6,11/7,11/16,11/17 - Scott Harrison # 12/2,12/3,12/4,12/5,12/6,12/13,12/19,12/29 - Scott Harrison # YEAR=2002 -# 1/8,1/9 - Scott Harrison +# 1/8,1/9,1/29,1/31,2/5,3/21,4/8,4/12 - Scott Harrison +# 4/21,4/26,5/19,5/23,10/13 - Scott Harrison # ### @@ -68,9 +78,12 @@ use HTML::TokeParser; my $usage=<; -my $parsestring = join('',@parsecontents); -my $outstring; +# -------------------------- Start first pass through (just gather information) +my @parsecontents=<>; +my $parsestring=join('',@parsecontents); # Need to make a pass through and figure out what defaults are -# overrided. Top-down overriding strategy (leaves don't know -# about distant leaves). +# overrided. Top-down overriding strategy (tree leaves don't know +# about distant tree leaves). my @hierarchy; $hierarchy[0]=0; @@ -151,20 +165,32 @@ my $token; $parser = HTML::TokeParser->new(\$parsestring) or die('can\'t create TokeParser object'); $parser->xml_mode('1'); -my %hash; -my $key; -while ($token = $parser->get_token()) { +my %setting; + +# Values for the %setting hash +my $defaultset=1; # a default setting exists for a key +my $distset=2; # a distribution setting exists for a key + # (overrides default setting) + +my $key=''; # this is a unique key identifier (the token name with its + # coordinates inside the hierarchy) +while ($token = $parser->get_token()) { # navigate through $parsestring if ($token->[0] eq 'S') { $hloc++; $hierarchy[$hloc]++; $key=$token->[1].join(',',@hierarchy[0..($hloc-1)]); my $thisdist=' '.$token->[2]{'dist'}.' '; if ($thisdist eq ' default ') { - $hash{$key}=1; # there is a default setting for this key + $setting{$key}=$defaultset; } - elsif ($dist && $hash{$key}==1 && $thisdist=~/\s$dist\s/) { - $hash{$key}=2; # disregard default setting for this key if - # there is a directly requested distribution match + elsif (length($dist)>0 && + $setting{$key}==$defaultset && + $thisdist=~/\s$dist\s/) { + $setting{$key}=$distset; + # disregard default setting for this key if + # there is a directly requested distribution match + # (in other words, there must first be a default + # setting for a key in order for it to be overridden) } } if ($token->[0] eq 'E') { @@ -172,57 +198,79 @@ while ($token = $parser->get_token()) { } } -# --------------------------------------------------- Start second pass through -undef $hloc; -undef @hierarchy; -undef $parser; -$hierarchy[0]=0; +# - Start second pass through (clean up the string to allow for easy rendering) + +# The string is cleaned up so that there is no white-space surrounding any +# XML tag. White-space inside text 'T' elements is preserved. + +# Clear up memory +undef($hloc); +undef(@hierarchy); +undef($parser); +$hierarchy[0]=0; # initialize hierarchy $parser = HTML::TokeParser->new(\$parsestring) or die('can\'t create TokeParser object'); $parser->xml_mode('1'); -my $cleanstring; -while ($token = $parser->get_token()) { - if ($token->[0] eq 'S') { +my $cleanstring; # contains the output of the second step +while ($token = $parser->get_token()) { # navigate through $parsestring + if ($token->[0] eq 'S') { # a start tag $hloc++; $hierarchy[$hloc]++; $key=$token->[1].join(',',@hierarchy[0..($hloc-1)]); - my $thisdist=' '.$token->[2]{'dist'}.' '; + + # Surround tagdist (the dist attribute of an XML tag) + # with white-space to allow for uniform searching a few + # lines below here. + my $tagdist=' '.$token->[2]{'dist'}.' '; + # This conditional clause is set up to ignore two sets # of invalid conditions before accepting entry into - # the cleanstring. - if ($hash{$key}==2 and - !($thisdist eq ' ' or $thisdist =~/\s$dist\s/)) { + # $cleanstring. + + # Condition #1: Ignore this part of the string if the tag + # has a superior distribution-specific setting and the tag + # being evaluated has a dist setting something other than + # blank or $dist. + if ($setting{$key}==$distset and + !($tagdist eq ' ' or $tagdist =~/\s$dist\s/)) { if ($token->[4]!~/\/>$/) { $parser->get_tag('/'.$token->[1]); $hloc--; } } - elsif ($thisdist ne ' ' and $thisdist!~/\s$dist\s/ and - !($thisdist eq ' default ' and $hash{$key}!=2)) { + # Condition #2: Ignore this part of the string if the tag has + # is not blank and does not equal dist and + # either does not equal default or it has a prior $dist-specific + # setting. + elsif ($tagdist ne ' ' and $tagdist!~/\s$dist\s/ and + !($tagdist eq ' default ' and $setting{$key}!=$distset)) { if ($token->[4]!~/\/>$/) { $parser->get_tag('/'.$token->[1]); $hloc--; } } + # In other words, output to $cleanstring if the tag is dist=default + # or if the tag is set to dist=$dist for the first time. And, always + # output when dist='' is not present. else { $cleanstring.=$token->[4]; } - if ($token->[4]=~/\/>$/) { - $hloc--; - } } - if ($token->[0] eq 'E') { + # Note: this loop DOES work with style markup as well as + # style markup since I always check for $token->[4] ending + # with "/>". + if ($token->[0] eq 'E') { # an end tag $cleanstring.=$token->[2]; $hloc--; } - if ($token->[0] eq 'T') { + if ($token->[0] eq 'T') { # text contents inside tags $cleanstring.=$token->[1]; } } $cleanstring=&trim($cleanstring); $cleanstring=~s/\>\s*\n\s*\\{textify}={ category => \&format_category, abbreviation => \&format_abbreviation, targetdir => \&format_targetdir, + protectionlevel => \&format_protectionlevel, chown => \&format_chown, chmod => \&format_chmod, rpm => \&format_rpm, @@ -336,6 +386,7 @@ $parser->{textify}={ build => \&format_build, status => \&format_status, dependencies => \&format_dependencies, + privatedependencies => \&format_privatedependencies, buildlink => \&format_buildlink, glob => \&format_glob, sourcedir => \&format_sourcedir, @@ -927,6 +978,9 @@ sub format_directories { elsif ($mode eq 'rpm_file_list') { return $text; } + elsif ($mode eq 'uninstall_shell_commands') { + return $text; + } else { return ''; } @@ -934,7 +988,7 @@ sub format_directories { # ---------------------------------------------------- Format directory section sub format_directory { my (@tokeninfo)=@_; - $targetdir='';$categoryname='';$description=''; + $targetdir='';$categoryname='';$description='';$protectionlevel=''; $parser->get_text('/directory'); $parser->get_tag('/directory'); $directory_count++; @@ -949,7 +1003,9 @@ sub format_directory { my ($chmod,$chown)=split(/\s/,$categoryhash{$categoryname}); return $directory="\n". "$categoryname". - " ". + "". + " ". "$chmod
$chown". "$thtml". "". @@ -966,6 +1022,36 @@ sub format_directory { elsif ($mode eq 'rpm_file_list') { return $targetroot.'/'.$targetdir."\n"; } + elsif ($mode eq 'uninstall_shell_commands') { + if ($protectionlevel eq 'never_delete') { + return 'echo "LEAVING BEHIND '.$targetroot.'/'.$targetdir. + ' which may have important data worth saving"'."\n"; + } + elsif ($protectionlevel eq 'weak_delete') { + if ($targetdir!~/\w/) { + die("targetdir=\"$targetdir\"! NEVER EVER DELETE THE WHOLE ". + "FILESYSTEM"."\n"); + } + return 'rm -Rvf -i '.$targetroot.'/'.$targetdir."\n"; + } + elsif ($protectionlevel =~ /never/) { + die("CONFUSING PROTECTION LEVEL \"$protectionlevel\" FOUND ". + "FOR directory $targetdir"."\n"); + } + elsif ($protectionlevel !~ + /^never_delete|weak_delete|modest_delete|strong_delete|absolute_delete$/) { + die("CONFUSING OR MISSING PROTECTION LEVEL \"$protectionlevel\" ". + "FOUND FOR directory $targetdir\n"); + } + else { + if ($targetdir!~/\w/) { + die("targetdir=\"$targetdir\"! NEVER EVER DELETE THE WHOLE ". + "FILESYSTEM"."\n"); + } + return 'rm -Rvf '.$targetroot.'/'.$targetdir. + "| grep 'removed directory'"."\n"; + } + } else { return ''; } @@ -981,6 +1067,17 @@ sub format_targetdir { } return ''; } +# ---------------------------------------------- Format protectionlevel section +sub format_protectionlevel { + my @tokeninfo=@_; + $protectionlevel=''; + my $text=&trim($parser->get_text('/protectionlevel')); + if ($text) { + $parser->get_tag('/protectionlevel'); + $protectionlevel=$text; + } + return ''; +} # ------------------------------------------------- Format categoryname section sub format_categoryname { my @tokeninfo=@_; @@ -1007,7 +1104,10 @@ sub format_description { sub format_files { my $text=$parser->get_text('/files'); $parser->get_tag('/files'); - if ($mode eq 'html') { + if ($mode eq 'MANIFEST') { + return $text; + } + elsif ($mode eq 'html') { return $directories="\n
 
". "". "Files
 
". @@ -1125,10 +1225,27 @@ sub format_file { $categorycount{$categoryname}++; if ($source) { $parser->get_tag('/file'); - if ($mode eq 'html') { + if ($mode eq 'MANIFEST') { + my $command=$build; + if ($command!~/\s/) { + $command=~s/\/([^\/]*)$//; + } + else { + $command=~s/(.*?\/)([^\/]+\s+.*)$/$1/; + } + $command=~s/^$sourceroot\///; + my (@deps)=split(/\;/,$dependencies); + my $retval=join("\n",($source, + (map {"$command$_"} @deps))); + if ($tokeninfo[2]{type} eq 'private') { + return "\n"; + } + return $retval."\n"; + } + elsif ($mode eq 'html') { return ($file="\n". "". - " ". @@ -1200,35 +1317,55 @@ END elsif ($mode eq 'configinstall' && $categoryname eq 'conf') { push @configall,$targetroot.'/'.$target; return $targetroot.'/'.$target.': alwaysrun'."\n". - "\t".'@echo -n ""; ECODE=0 && { perl filecompare.pl -b4 '. - $sourceroot.'/'.$source.' '.$targetroot.'/'.$target. - ' || ECODE=$$?; } && '. - '{ [ $$ECODE != "2" ] || (install '. - $categoryhash{$categoryname}.' '. - $sourceroot.'/'.$source.' '. - $targetroot.'/'.$target.'.lpmlnew'. + "\t".'@# Compare source with target and intelligently respond'. + "\n\t\n\t\n". + + + "\t".'@echo -n ""; ECODE=0 && { perl filecompare.pl -b4 \\'. + "\n\t".$sourceroot.'/'.$source." \\\n\t". + $targetroot.'/'.$target." \\\n\t". + ' || ECODE=$$?; } && '."\\\n\t"."\\\n\t"."\\\n\t". + + + '{ [ $$ECODE != "2" ] || '." \\\n\t".'(install '. + $categoryhash{$categoryname}." \\\n\t\t". + $sourceroot.'/'.$source." \\\n\t\t". + $targetroot.'/'.$target.'.lpmlnew'." \\\n\t\t". ' && echo "**** NOTE: CONFIGURATION FILE CHANGE ****"'. - $logcmd.' && echo "'. - 'You likely need to compare contents of '. - ''.$targetroot.'/'.$target.' with the new '. - ''.$targetroot.'/'.$target.'.lpmlnew"'. - "$logcmd); } && ". - '{ [ $$ECODE != "3" ] || (install '. - $categoryhash{$categoryname}.' '. - $sourceroot.'/'.$source.' '. - $targetroot.'/'.$target.''. + " \\\n\t\t".$logcmd.' && '." \\\n\t\t"."echo -n \"". + 'You likely need to compare contents of "'."\\\n\t\t\t". + '&& echo -n "'.$targetroot.'/'.$target.'"'."\\\n\t\t". + '&& echo -n " with the new "'."\\\n\t\t\t". + '&& echo "'.$targetroot.'/'.$target.'.lpmlnew"'."\\\n\t\t". + "$logcmd); } && "." \\\n\t"."\\\n\t"."\\\n\t". + + + '{ [ $$ECODE != "3" ] || '."\\\n\t". + '(install '. + $categoryhash{$categoryname}."\\\n\t\t". + $sourceroot.'/'.$source."\\\n\t\t". + $targetroot.'/'.$target."\\\n\t\t". ' && echo "**** WARNING: NEW CONFIGURATION FILE ADDED ****"'. - $logcmd.' && echo "'. - 'You likely need to review the contents of '. - ''.$targetroot.'/'.$target.' to make sure its '. - 'settings are compatible with your overall system"'. - "$logcmd); } && ". - '{ [ $$ECODE != "1" ] || ('. - 'echo "**** ERROR ****"'. - $logcmd.' && echo "'. - 'Configuration source file does not exist '. - ''.$sourceroot.'/'.$source.'"'. - "$logcmd); } && perl verifymodown.pl ${targetroot}/${target} \"$categoryhash{$categoryname}\"$logcmd;\n\n"; + "\\\n\t\t".$logcmd.' && '."\\\n\t\t". + 'echo -n "'. + 'You likely need to review the contents of "'."\\\n\t\t\t". + '&& echo -n "'. + $targetroot.'/'.$target.'"'."\\\n\t\t\t". + '&& echo -n "'. + ' to make sure its "'."\\\n\t\t". + '&& echo "'. + 'settings are compatible with your overall system"'."\\\n\t\t". + "$logcmd); } && "."\\\n\t"."\\\n\t"."\\\n\t". + + + '{ [ $$ECODE != "1" ] || ('."\\\n\t\t". + 'echo "**** ERROR ****"'.$logcmd.' && '."\\\n\t\t".'echo -n "'. + 'Configuration source file does not exist "'."\\\n\t\t". + '&& echo -n "'.$sourceroot.'/'.$source.'"'."\\\n\t\t". + "$logcmd); } && "."\\\n\t\t". + "perl verifymodown.pl ${targetroot}/${target} "."\\\n\t\t\t". + "\"$categoryhash{$categoryname}\""."\\\n\t\t\t". + "$logcmd;\n\n"; } elsif ($mode eq 'build' && $build) { push @buildall,$sourceroot.'/'.$source; @@ -1335,9 +1472,12 @@ sub format_fileglob { $categorycount{$categoryname}+=scalar(@semi)+1; if ($sourcedir) { $parser->get_tag('/fileglob'); - if ($mode eq 'html') { + if ($mode eq 'MANIFEST') { + return join("\n",(map {"$sourcedir$_"} split(/\;/,$filenames2)))."\n"; + } + elsif ($mode eq 'html') { return $fileglob="\n". - " ". @@ -1453,6 +1593,7 @@ sub format_build { if ($text) { $parser->get_tag('/build'); $build=$sourceroot.'/'.$text.';'.$tokeninfo[2]{'trigger'}; + $build=~s/([^\\])\\\s+/$1/g; # allow for lines split onto new lines } return ''; } @@ -1481,12 +1622,24 @@ sub format_status { # ------------------------------------------------- Format dependencies section sub format_dependencies { my @tokeninfo=@_; - $dependencies=''; + #$dependencies=''; my $text=&trim($parser->get_text('/dependencies')); if ($text) { $parser->get_tag('/dependencies'); - $dependencies=join(';', - (map {s/^\s*//;s/\s$//;$_} split(/\;/,$text))); + $dependencies=join(';',((map {s/^\s*//;s/\s$//;$_} split(/\;/,$text)),$dependencies)); + $dependencies=~s/;$//; + } + return ''; +} +sub format_privatedependencies { + my @tokeninfo=@_; + #$dependencies=''; + my $text=&trim($parser->get_text('/privatedependencies')); + if ($text) { + $parser->get_tag('/privatedependencies'); + if ($mode eq 'MANIFEST') { return ''; } + $dependencies=join(';',((map {s/^\s*//;s/\s$//;$_} split(/\;/,$text)),$dependencies)); + $dependencies=~s/;$//; } return ''; } @@ -1511,7 +1664,7 @@ sub format_filenames { } return ''; } -# ------------------------------------------------ Format specialnotice section +# ----------------------------------------------- Format specialnotices section sub format_specialnotices { $parser->get_tag('/specialnotices'); return ''; @@ -1545,14 +1698,17 @@ sub trim { # ----------------------------------- POD (plain old documentation, CPAN style) +=pod + =head1 NAME lpml_parse.pl - This is meant to parse files meeting the lpml document type. -See lpml.dtd. LPML=Linux Packaging Markup Language. =head1 SYNOPSIS -Usage is for lpml file to come in through standard input. + | perl lpml_parse.pl + +Usage is for the lpml file to come in through standard input. =over 4 @@ -1584,19 +1740,57 @@ Only the 1st argument is mandatory for t Example: cat ../../doc/loncapafiles.lpml |\\ -perl lpml_parse.pl html default /home/sherbert/loncapa /tmp/install +perl lpml_parse.pl html runtime default /home/sherbert/loncapa /tmp/install =head1 DESCRIPTION -I am using a multiple pass-through approach to parsing -the lpml file. This saves memory and makes sure the server -will never be overloaded. +The general flow of the script is to get command line arguments, run through +the XML document three times, and output according to any desired mode: +install, configinstall, build, rpm, dpkg, htmldoc, textdoc, and status. + +A number of coding decisions are made according to the following principle: +installation software must be stand-alone. Therefore, for instance, I try +not to use the GetOpt::Long module or any other perl modules. (I do however +use HTML::TokeParser.) I also have tried to keep all the MODES of +parsing inside this file. Therefore, format_TAG subroutines are fairly +lengthy with their conditional logic. A more "elegant" solution might +be to dynamically register the parsing mode and subroutines, or maybe even work +with stylesheets. However, in order to make this the installation back-bone +of choice, there are advantages for HAVING EVERYTHING IN ONE FILE. +This way, the LPML installation software does not have to rely on OTHER +installation software (a chicken versus the egg problem). Besides, I would +suggest the modes of parsing are fairly constant: install, configinstall, +build, rpm, dpkg, htmldoc, textdoc, and status. + +Another coding decision is about using a multiple pass-through approach to +parsing the lpml file. This saves memory and makes sure the server will never +be overloaded. During the first pass-through, the script gathers information +specific as to resolving what tags with what 'dist=' attributes are to be used. +During the second pass-through, the script cleans up white-space surrounding +the XML tags, and filters through the tags based on information regarding the +'dist=' attributes (information gathered in the first pass-through). +The third and final pass-through involves formatting and rendering the XML +into whatever XML mode is chosen: install, configinstall, build, rpm, dpkg, +htmldoc, textdoc, and status. + +The hierarchy mandated by the DTD does not always correspond to the hierarchy +that is sensible for a Makefile. For instance, in a Makefile it is sensible +that soft-links are installed after files. However, in an LPML document, it +is sensible that files and links be considered together and the writer of the +LPML document should be free to place things in whatever order makes best +sense in terms of LOOKING at the information. The complication that arises +is that the parser needs to have a memory for passing values from +leaves on the XML tree to higher-up branches. Currently, this memory is +hard-coded (like with the @links array), but it may benefit from a more +formal approach in the future. =head1 README -I am using a multiple pass-through approach to parsing -the lpml file. This saves memory and makes sure the server -will never be overloaded. +This parses an LPML file to generate information useful for +source to target installation, compilation, filesystem status +checking, RPM and Debian software packaging, and documentation. + +More information on LPML is available at http://lpml.sourceforge.net. =head1 PREREQUISITES @@ -1610,6 +1804,14 @@ linux =head1 SCRIPT CATEGORIES -Packaging/Administrative +UNIX/System_administration + +=head1 AUTHOR + + Scott Harrison + codeharrison@yahoo.com + +Please let me know how/if you are finding this script useful and +any/all suggestions. -Scott =cut