[BACK]Return to localenroll.pm CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom / enrollment

Diff for /loncom/enrollment/localenroll.pm between versions 1.43 and 1.51

version 1.43, 2011/10/14 17:13:25 version 1.51, 2015/05/30 16:14:38
Line 123  sub run() { Line 123  sub run() {
   <middlename>D</middlename>    <middlename>D</middlename>
   <startdate></startdate>    <startdate></startdate>
   <studentID>A12345678</studentID>    <studentID>A12345678</studentID>
     <credits></credits>
     <inststatus></inststatus>
  </student>   </student>
     
  with the following at the top of the file   with the following at the top of the file
Line 147  sub run() { Line 149  sub run() {
  If dates are to included in the XML file, they should be in the format   If dates are to included in the XML file, they should be in the format
  YYYY:MM:DD:HH:MM:SS (: separators required).   YYYY:MM:DD:HH:MM:SS (: separators required).
   
    The <credits> tag need only be used if the credits earned by the students will 
    be different from the default for the course. The course default is set when the
    course is created and can be modifed by a Domain Coordinator via "View or
    modify a course or community" on the DC's Main Menu screen.
   
    A value for <inststatus> should be the institutional status used for students,
    and should be one of the types defined in the "Institutional user types"
    section in the domain config screen for:
    "Default authentication/language/timezone/portal/types" 
   
    If no status types are defined for the domain this tag can be omitted.
    If Autoupdate.pl is enabled in your domain, updates to the institutional 
    status set here will be updated by Autoupdate.pl, should changes occur.
   
  If there were 10 students in fs03nop590001, 5 students in fs03nop59o601,    If there were 10 students in fs03nop590001, 5 students in fs03nop59o601, 
  8 students in fs03nop590602, and 2 students in fs03ost580002,   8 students in fs03nop590602, and 2 students in fs03ost580002,
  then $$reply{'43551dedcd43febmsul1'} = 25   then $$reply{'43551dedcd43febmsul1'} = 25
Line 301  validate_instcode takes three arguments Line 317  validate_instcode takes three arguments
  (c) an optional institutional username for the course owner.   (c) an optional institutional username for the course owner.
   
 An array is returned containing (a) the result of the check for a valid   An array is returned containing (a) the result of the check for a valid 
 instcode, and (b) an (optional) course description.     instcode, (b) an (optional) course description, and (c) the default credits
   earned by students when completing this course. If no institutional credits
   value is available, the default credits for the course can be set via the
   course request form, or via XML in a batch file, of via the web form used
   by the Domain Coordinator to create new courses one at a time.
   
 A valid instcode is confirmed by returning 'valid'.  A valid instcode is confirmed by returning 'valid'.
   
 If no course description is available, '' should be set as  If no course description is available, '' should be set as
 the value of the second item in the returned array.  the value of the second item in the returned array.
   
Line 312  sub validate_instcode { Line 334  sub validate_instcode {
     my ($dom,$instcode,$owner) = @_;      my ($dom,$instcode,$owner) = @_;
     my $outcome = '';      my $outcome = '';
     my $description = '';      my $description = '';
     return ($outcome,$description);      my $credits = '';
       return ($outcome,$description,$credits);
 }  }
   
 =pod  =pod
Line 335  Other scenarios are possible, and the ro Line 358  Other scenarios are possible, and the ro
 to whatever rules a domain wishes to implement to run validations against  to whatever rules a domain wishes to implement to run validations against
 given the data passed in to the routine.  given the data passed in to the routine.
   
 validate_crsreq takes six arguments -  validate_crsreq takes seven arguments -
  (a) the LON-CAPA domain that will contain the course.   (a) the LON-CAPA domain that will contain the course.
  (b) the username:domain for the course owner.   (b) the username:domain for the course owner.
  (c) the course type (official, unofficial or community)   (c) the course type (official, unofficial or community)
  (d) a comma-separated list of institutional affiliations of    (d) a comma-separated list of institutional affiliations of 
      the course owner.       the course owner.
  (e) the institutional code (in the MSU case this is a concatenation of   (e) the institutional code (in the MSU case this is a concatenation of
  semester code, department code, and course number, e.g., fs03nop590.   semester code, department code, and course number, e.g., fs03nop590).
  (f) a comma-separated list of institutional sections included in   (f) a comma-separated list of institutional sections included in
      the course request (only applicable to official courses).       the course request (only applicable to official courses).
    (g) an optional reference to a hash of custom form data.
        The custom form data will come from crsreq_updates().
   
 A valid courserequest is confirmed by returning 'process'.  A valid courserequest is confirmed by returning 'process'.
 The following can be returned: process, rejected, pending, approval or error (with error condition - no :), followed by a : and then an optional message.   The following can be returned: process, rejected, pending, approval or 
   error (with error condition - no :), followed by a : and then an optional message. 
   
 (a) process  - the requestor is the recorded instructor - create the course  (a) process  - the requestor is the recorded instructor - create the course
 (b) rejected - the requestor should never be requesting this course, reject the  (b) rejected - the requestor should never be requesting this course, reject the
     request permanently      request permanently
 (c) pending - the requestor is not the recorded instructor, but could  (c) pending - the requestor is not the recorded instructor, but could
     become so after administrative action at the institution. Put the      become so after administrative action at the institution. Put the
     request in a queue and check localenroll:validate_instcode()      request in a queue and, if an official course, check 
     periodically until the status changes to "valid".      localenroll:validate_instcode() periodically until the status changes to 
       "valid".
 (d) approval - the request will be held pending review by a Domain Coordinator.  (d) approval - the request will be held pending review by a Domain Coordinator.
 (e) error (followed by the error condition).  (e) error (followed by the error condition).
   
 =cut  =cut
   
 sub validate_crsreq {  sub validate_crsreq {
     my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist) = @_;      my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist,$custominfo) = @_;
     my $outcome = 'approval';      my $outcome = 'approval';
     return $outcome;      return $outcome;
 }  }
Line 417  sub crsreq_checks { Line 444  sub crsreq_checks {
     return 'ok';      return 'ok';
 }  }
   
   sub crsreq_updates {
       my ($cdom,$cnum,$crstype,$action,$ownername,$ownerdomain,$fullname,$title,
           $code,$accessstart,$accessend,$incoming,$outgoing) = @_;
       unless (ref($outgoing) eq 'HASH') {
           return 'fail';
       }
       my %extrainfo;
       if (ref($incoming) eq 'HASH') {
           %extrainfo = %{$incoming};
       }
       if ($action eq 'review') {
           $outgoing->{'reviewweb'} = '';
       } elsif ($action eq 'prevalidate') {
           $outgoing->{'formitems'} = {}; # key=>value, where key is form element name
                                          #             and value is multiple, if there
                                          #             are multiple form elements with
                                          #             the same name.
       } elsif ($action eq 'process') {
           $outgoing->{'formitems'} = {}; # key=>value, where key is form element name
                                          #             and value is multiple, if there
                                          #             are multiple form elements with
                                          #             the same name.
       } elsif ($action eq 'created') {
           $outgoing->{'createdweb'} = '';
           $outgoing->{'createdmsg'} = [{
                                        mt => '',
                                        args => [],
                                       }];
           $outgoing->{'createdactions'} = {
                                               environment => {},
                                           };
                                           # environment can contain key=>value for
                                           # items to set in the course environment.
                                           # These would be items which are NOT included
                                           # in the items set via options in the course
                                           # request form. Currently self-enrollment
                                           # settings are the only ones allowed, i.e.,
                                           # internal.selfenroll_types internal.selfenroll_registered
                                           # internal.selfenroll_section internal.selfenroll_start_access 
                                           # internal.selfenroll_end_access internal.selfenroll_limit
                                           # internal.selfenroll_cap internal.selfenroll_approval
                                           # internal.selfenroll_notifylist
       } elsif ($action eq 'queued') {
           $outgoing->{'queuedmsg'} = [{
                                        mt   => '',
                                        args => [],
                                       }];
           $outgoing->{'queuedweb'} = '';
       }
       return 'ok'
   }
   
 =pod  =pod
   
 =item create_password()  =item create_password()
Line 818  sub get_userinfo { Line 897  sub get_userinfo {
   
 =item inst_usertypes()   =item inst_usertypes() 
   
    Starting with LON-CAPA 2.11.0 use of this subroutine
    is deprecated. The domain configuration web GUI
    accessible to Domain Coordinators will be used to
    manage institutional types.  If you have previously
    customized this routine, then values set there will
    be used when displaying the "Institutional user types"
    section in the domain config screen for:
    "Default authentication/language/timezone/portal/types".
   
    Once you have visited that screen and saved the settings,
    configuration thereafter will be via the web GUI of
    values stored in the domain's configuration.db file on
    the primary library server in the domain, and values in
    inst_usertypes() will no longer be consulted.
    
  Incoming data: three arguments   Incoming data: three arguments
  (a) $dom - domain   (a) $dom - domain
  (b) $usertypes - reference to hash which will contain    (b) $usertypes - reference to hash which will contain 
Removed from v.1.43  
changed lines
  Added in v.1.51

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>