Annotation of loncom/enrollment/localenroll.pm, revision 1.46
1.5 albertel 1: # functions to glue school database system into Lon-CAPA for
2: # automated enrollment
1.46 ! raeburn 3: # $Id: localenroll.pm,v 1.45 2014/01/03 18:39:55 raeburn Exp $
1.5 albertel 4: #
5: # Copyright Michigan State University Board of Trustees
6: #
7: # This file is part of the LearningOnline Network with CAPA (LON-CAPA).
8: #
9: # LON-CAPA is free software; you can redistribute it and/or modify
10: # it under the terms of the GNU General Public License as published by
11: # the Free Software Foundation; either version 2 of the License, or
12: # (at your option) any later version.
13: #
14: # LON-CAPA is distributed in the hope that it will be useful,
15: # but WITHOUT ANY WARRANTY; without even the implied warranty of
16: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: # GNU General Public License for more details.
18: #
19: # You should have received a copy of the GNU General Public License
20: # along with LON-CAPA; if not, write to the Free Software
21: # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22: #
23: # /home/httpd/html/adm/gpl.txt
24: #
25: # http://www.lon-capa.org/
26: #
1.32 jms 27:
28: =pod
29:
30: =head1 NAME
31:
32: localenroll
33:
34: =head1 SYNOPSIS
35:
36: This is part of the LearningOnline Network with CAPA project
37: described at http://www.lon-capa.org.
38:
39:
40: =head1 NOTABLE SUBROUTINES
41:
42: =over
43:
44: =cut
45:
1.4 raeburn 46: package localenroll;
47:
48: use strict;
1.6 albertel 49:
1.32 jms 50: =pod
51:
52: =item run()
53: set this to return 1 if you want the auto enrollment to run
54:
55: Beginning with LON-CAPA version 2.4, use of this routine is
56: deprecated. Whether or not Autoenroll.pl should run is set
57: by the Domain Coordinator via "Set domain configuration",
58: provided in the Domain Management section of the Main menu.
59:
60: =cut
1.6 albertel 61:
1.9 raeburn 62: sub run() {
63: my $dom = shift;
64: return 0;
65: }
1.4 raeburn 66:
1.32 jms 67:
68: =pod
69:
70: =item fetch_enrollment()
71:
72: connects to the institutional classlist data source,
73: reads classlist data and stores in an XML file
74: in /home/httpd/perl/tmp/
75:
76: classlist files are named as follows:
77:
78: DOMAIN_COURSE_INSTITUTIONALCODE_classlist.xml
79:
80: e.g., msu_43551dedcd43febmsul1_fs03nop590001_classlist.xml
81: where DOMAIN = msu COURSE = 43551dedcd43febmsul1
82: INSTITUTIONALCODE = fs03nop590001
83: (MSU's course naming scheme - fs03 = Fall semester 2003, nop =
84: department name, 590 = course number, 001 = section number.)
85:
86: fetch_enrollment requires three arguments -
87: $dom - DOMAIN e.g., msu
88: $affiliatesref - a reference to a hash of arrays that contains LON-CAPA
89: courses that are to be updated as keys, and institutional coursecodes
90: contributing enrollment to that LON-CAPA course as elements in each array.
91: $replyref - a reference to a hash that contains LON-CAPA courses
92: that are to be updated as keys, and the total enrollment count in all
93: affiliated sections, as determined from institutional data as hash elements.
94:
95: As an example, if fetch_enrollment is called to retrieve institutional
96: classlists for a single LON-CAPA course - 43551dedcd43febmsul1 which
97: corresponds to fs03nop590, sections 001, 601 and 602 , and the course
98: also accommodates enrollment from a crosslisted course in the ost
99: department - fs03ost580002:
100:
101: the affiliatesref would be a reference to %affiliates which would be:
102:
103: @{$affiliates{'43551dedcd43febmsul1'}} =
104: ("fs03nop590001","fs03nop590601","fs03nop590602","fs03ost580002");
105:
106: fetch_enrollment would create four files in /home/httpd/perl/tmp/.
107: msu_43551dedcd43febmsul1_fs03nop590001_classlist.xml
108: msu_43551dedcd43febmsul1_fs03nop590601_classlist.xml
109: msu_43551dedcd43febmsul1_fs03nop590602_classlist.xml
110: msu_43551dedcd43febmsul1_fs03ost580002_classlist.xml
111:
112: In each file, student data would be stored in the following format
113:
114: <student username="smith">
115: <autharg>MSU.EDU</autharg>
116: <authtype>krb4</authtype>
117: <email>smith@msu.edu</email>
118: <enddate></enddate>
119: <firstname>John</firstname>
120: <generation>II</generation>
121: <groupID>fs03nop590001</groupID>
122: <lastname>Smith</lastname>
123: <middlename>D</middlename>
124: <startdate></startdate>
125: <studentID>A12345678</studentID>
1.44 raeburn 126: <credits></credits>
127: <inststatus></inststatus>
1.32 jms 128: </student>
129:
130: with the following at the top of the file
131: <?xml version="1.0" encoding="UTF-8"?>
132: <!DOCTYPE text>
133: <students>
134:
135: (all comment - s removed)
136:
137: and a closing:
138: </students>
139:
140: The <startdate> and the <enddate> are the activation date and expiration date
141: for this student's role. If they are absent, then the default access start and
142: default access end dates are used. The default access dates can be set when
143: the course is created, and can be modified using the Automated Enrollment
144: Manager, or via the 'Upload a class list','Enroll a single student' or
145: 'Modify student data' utilities in the Enrollment Manager, by checking the
146: 'make these dates the default for future enrollment' checkbox. If no default
147: dates have been set, then the tudent role will be active immediately, and will
148: remain active until the role is explicitly expired using ENRL -> Drop students.
149: If dates are to included in the XML file, they should be in the format
150: YYYY:MM:DD:HH:MM:SS (: separators required).
151:
1.44 raeburn 152: The <credits> tag need only be used if the credits earned by the students will
153: be different from the default for the course. The course default is set when the
154: course is created and can be modifed by a Domain Coordinator via "View or
155: modify a course or community" on the DC's Main Menu screen.
156:
157: A value for <inststatus> should be the institutional status used for students,
158: and should be one of the types defined in inst_usertypes(). If no status
159: types are defined for the domain this tag can be omitted. If Autoupdate.pl
160: is enabled in your domain, updates to the institutional status set here
161: will be updated by Autoupdate.pl, should changes occur.
162:
1.32 jms 163: If there were 10 students in fs03nop590001, 5 students in fs03nop59o601,
164: 8 students in fs03nop590602, and 2 students in fs03ost580002,
165: then $$reply{'43551dedcd43febmsul1'} = 25
166:
167: The purpose of the %reply hash is to detect cases where the institutional
168: enrollment is 0 (most likely due to a problem with the data source).
169: In such a case, the LON-CAPA course roster is left unchanged (i.e., no
170: students are expired, even if automated drops is enabled.
171:
172: fetch_enrollment should return a 0 or 1, depending on whether a connection
173: could be established to the institutional data source.
174: 0 is returned if no connection could be made.
175: 1 is returned if connection was successful
176:
177: A return of 1 is required for the calling modules to perform LON-CAPA
178: roster changes based on the contents of the XML classlist file(s), e,g,,
179: msu_43551dedcd43febmsul1_fs03nop590001_classlist.xml
180:
181: XML classlist files are temporary. They are deleted after the enrollment
182: update process in the calling module is complete.
183:
184:
185: =cut
1.1 raeburn 186:
187: sub fetch_enrollment {
1.7 matthew 188: my ($dom,$affiliatesref,$replyref) = @_;
189: foreach my $crs (sort keys %{$affiliatesref}) {
190: $$replyref{$crs} = 0;
191: }
192: my $okflag = 0;
193: return $okflag;
1.4 raeburn 194: }
195:
1.32 jms 196: =pod
197:
198: =item get_sections()
199:
200: This is called by the Automated Enrollment Manager interface
201: (lonpopulate.pm) to create an array of valid sections for
202: a specific institutional coursecode.
203: e.g., for MSU coursecode: fs03nop590
204: ("001","601","602") would be returned
205:
206: If the array returned contains at least one element, then
207: the interface offerred to the course coordinator, lists
208: official sections and provides a checkbox to use to
209: select enrollment in the LON-CAPA course from each official section.
210:
211: get_sections takes two arguments - (a) the institutional coursecode
212: (in the MSU case this is a concatenation of semester code, department
213: and course number), and (b) the LON-CAPA domain that contains the course.
214:
215: If there is no access to official course sections at your institution,
216: then an empty array is returned, and the Automated Enrollment Manager
217: interface will allow the course coordinator to enter section numbers
218: in text boxes.
219:
220:
221:
222: =cut
1.4 raeburn 223:
224: sub get_sections {
1.9 raeburn 225: my ($coursecode,$dom) = @_;
1.4 raeburn 226: my @secs = ();
227: return @secs;
1.1 raeburn 228: }
229:
1.32 jms 230: =pod
231:
232: =item new_course()
233:
234: This is called by loncreatecourse.pm and
235: lonpopulate.pm to record that fact that a new course section
236: has been added to LON-CAPA that requires access to institutional data
237: At MSU, this is required, as institutional classlists can only made
238: available to faculty who are officially assigned to a course.
239:
240: The new_course subroutine is used to check that the course owner
241: of the LON-CAPA course is permitted to access the institutional
242: classlist for any course sections and crosslisted classes that
243: the course coordinator wishes to have affiliated with the course.
244:
245: If access is permitted, then 'ok' is returned.
246: The course section or crosslisted course will only be added to the list of
247: affiliates if 'ok' is returned.
248:
1.41 raeburn 249: new_course takes three required arguments -
1.32 jms 250: (a) the institutional courseID (in the MSU case this is a concatenation of
251: semester code, department code, course number, and section number
252: e.g., fs03nop590001).
253: (b) the course owner. This is the LON-CAPA username and domain of the course
254: coordinator assigned to the course when it is first created, in the form
255: username:domain
256: (c) the LON-CAPA domain that contains the course
257:
1.41 raeburn 258: new_course also takes a fourth (optional) argument -
259: (d) the course co-owners, as a comma-separated list of username:domain for
260: any co-owners.
261:
1.32 jms 262: =cut
1.4 raeburn 263:
264: sub new_course {
1.41 raeburn 265: my ($course_id,$owner,$dom,$coowners) = @_;
1.4 raeburn 266: my $outcome = 'ok';
267: return $outcome;
1.1 raeburn 268: }
269:
1.32 jms 270: =pod
271:
272: =item validate_courseID()
273:
274: This is called whenever a new course section or crosslisted course
275: is being affiliated with a LON-CAPA course (i.e., by loncreatecourse.pm
276: and the Automated Enrollment Manager in lonpopulate.pm).
277: A check is made that the courseID that the course coordinator wishes
278: to affiliate with the course is valid according to the institutional
279: schedule of official classes
280:
281: A valid courseID is confirmed by returning 'ok'
282:
283: validate_courseID takes two arguments -
284: (a) the institutional courseID (in the MSU case this is a concatenation of
285: semester code, department code, course number, and section number
286: e.g., fs03nop590001).
287: (b) the LON-CAPA domain that contains the course
288:
289: =cut
1.4 raeburn 290:
291: sub validate_courseID {
1.9 raeburn 292: my ($course_id,$dom) = @_;
1.4 raeburn 293: my $outcome = 'ok';
294: return $outcome;
295: }
1.1 raeburn 296:
1.32 jms 297: =pod
298:
1.36 raeburn 299: =item validate_instcode()
300:
301: This is called when a request is being made for an official course.
302: A check is made that the institutional code for which a course is
303: is being requested is valid according to the institutional
304: schedule of official classes.
305:
306: If the username of the course owner is provided, a more restrictive
307: test is used, namely that the requestor is listed as instructor of
308: record for the course in the institution's course schedule/database.
309:
1.38 raeburn 310: validate_instcode takes three arguments -
1.36 raeburn 311: (a) the LON-CAPA domain that will contain the course
312: (b) the institutional code (in the MSU case this is a concatenation of
313: semester code, department code, and course number, e.g., fs03nop590.
314: (c) an optional institutional username for the course owner.
315:
1.39 raeburn 316: An array is returned containing (a) the result of the check for a valid
1.44 raeburn 317: instcode, (b) an (optional) course description, and (c) the default credits
318: earned by students when completing this course. If no institutional credits
319: value is available, the default credits for the course can be set via the
320: course request form, or via XML in a batch file, of via the web form used
321: by the Domain Coordinator to create new courses one at a time.
322:
1.39 raeburn 323: A valid instcode is confirmed by returning 'valid'.
1.44 raeburn 324:
1.39 raeburn 325: If no course description is available, '' should be set as
326: the value of the second item in the returned array.
327:
1.36 raeburn 328: =cut
329:
330: sub validate_instcode {
1.38 raeburn 331: my ($dom,$instcode,$owner) = @_;
1.36 raeburn 332: my $outcome = '';
1.39 raeburn 333: my $description = '';
1.44 raeburn 334: my $credits = '';
335: return ($outcome,$description,$credits);
1.36 raeburn 336: }
337:
338: =pod
339:
1.38 raeburn 340: =item validate_crsreq()
341:
342: This is used to check whether a course request should be processed
343: automatically, or held in a queue pending administrative action at
344: the institution.
345:
346: Course requests will trigger this check if the process type has been set
347: to 'validate' for the course type (official, unofficial or community) and
348: the requestor's affiliation. Whether "validate" is an available option
349: in the Domain Configuration menu is controlled by auto_courserequest_checks().
350: One scenario is where the request is for an official course, in which case
351: a check could be made that the requestor is listed as instructor of
352: record for the course in the institution's course schedule/database.
353:
354: Other scenarios are possible, and the routine can be customized according
355: to whatever rules a domain wishes to implement to run validations against
356: given the data passed in to the routine.
357:
358: validate_crsreq takes six arguments -
359: (a) the LON-CAPA domain that will contain the course.
360: (b) the username:domain for the course owner.
361: (c) the course type (official, unofficial or community)
362: (d) a comma-separated list of institutional affiliations of
363: the course owner.
364: (e) the institutional code (in the MSU case this is a concatenation of
1.46 ! raeburn 365: semester code, department code, and course number, e.g., fs03nop590).
1.38 raeburn 366: (f) a comma-separated list of institutional sections included in
367: the course request (only applicable to official courses).
1.46 ! raeburn 368: (g) an optional reference to a hash of custom form data.
! 369: The custom form data will come from crsreq_updates().
1.38 raeburn 370:
371: A valid courserequest is confirmed by returning 'process'.
1.46 ! raeburn 372: The following can be returned: process, rejected, pending, approval or
! 373: error (with error condition - no :), followed by a : and then an optional message.
1.38 raeburn 374:
375: (a) process - the requestor is the recorded instructor - create the course
1.40 raeburn 376: (b) rejected - the requestor should never be requesting this course, reject the
1.38 raeburn 377: request permanently
378: (c) pending - the requestor is not the recorded instructor, but could
379: become so after administrative action at the institution. Put the
1.46 ! raeburn 380: request in a queue and, if an official course, check
! 381: localenroll:validate_instcode() periodically until the status changes to
! 382: "valid".
1.38 raeburn 383: (d) approval - the request will be held pending review by a Domain Coordinator.
384: (e) error (followed by the error condition).
385:
386: =cut
387:
388: sub validate_crsreq {
1.46 ! raeburn 389: my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist,$custominfo) = @_;
1.38 raeburn 390: my $outcome = 'approval';
391: return $outcome;
392: }
393:
394: =pod
395:
396: =item crsreq_checks()
397:
398: This is used to determine whether the "validate" option should appear in the
399: possible choices for course request processing in the Domain Configuration
400: menu for Course Requests. Ultimately it is called by domainprefs.pm (via:
401: lonnet -> lond -> localenroll.pm) The domain configuration menu includes
402: a table where columns are course type (official, unofficial or community)
403: and rows are institutional affiliations (e.g., Faculty, Staff, Student etc.).
404:
1.42 raeburn 405: crsreq_checks() takes three arguments: $dom, $reqtypes, $validations.
1.38 raeburn 406: $dom - the domain for which validation options are needed.
407: $reqtypes - ref to an ARRAY of course types (i.e., official, unofficial and community.
408: $validations - ref to a hash of a hash which will determine whether "validate"
409: will be one of the possible choices for each course type (outer hash key),
410: and institutional type (inner hash key).
411:
412: For example to allow validate to be a choice for official classes for Faculty,
413: req_checks would include:
414:
415: $validations{'official'}{'Faculty'} = 1;
416:
417: This routine is closely tied to validate_crsreq(). "Validate" should not be
418: a possible choice in the domain configuration menu for a particular course
419: type/institutional affiliation, unless a corresponding validation code has
420: been implemented in validate_crsreq().
421:
422: For example at MSU, official courses requested by Faculty will be validated
423: against the official schedule of classes to check that the requestor is one
424: of the instructors of record for the course. In this case validate_crsreq()
425: includes a call to validate_instcode().
426:
427: =cut
428:
429: sub crsreq_checks {
430: my ($dom,$reqtypes,$validations) = @_;
431: if ((ref($reqtypes) eq 'ARRAY') && (ref($validations) eq 'HASH')) {
432: my (%usertypes,@order);
433: if (&inst_usertypes($dom,\%usertypes,\@order) eq 'ok') {
434: foreach my $type (@{$reqtypes}) {
435: foreach my $inst_type (@order) {
436: $validations->{$type}{$inst_type} = 0;
437: }
438: }
439: }
440: }
441: return 'ok';
442: }
443:
1.45 raeburn 444: sub crsreq_updates {
445: my ($cdom,$cnum,$crstype,$action,$ownername,$ownerdomain,$fullname,$title,
446: $code,$incoming,$outgoing) = @_;
447: unless (ref($outgoing) eq 'HASH') {
448: return 'fail';
449: }
450: my %extrainfo;
451: if (ref($incoming) eq 'HASH') {
452: %extrainfo = %{$incoming};
453: }
454: if ($action eq 'review') {
455: $outgoing->{'reviewweb'} = '';
1.46 ! raeburn 456: } elsif ($action eq 'prevalidate') {
! 457: $outgoing->{'formitems'} = {}; # key=>value, where key is form element name
! 458: # and value is multiple, if there
! 459: # are multiple form elements with
! 460: # the same name.
1.45 raeburn 461: } elsif ($action eq 'process') {
462: $outgoing->{'formitems'} = {}; # key=>value, where key is form element name
463: # and value is multiple, if there
464: # are multiple form elements with
1.46 ! raeburn 465: # the same name.
1.45 raeburn 466: } elsif ($action eq 'created') {
467: $outgoing->{'createdweb'} = '';
468: $outgoing->{'createdmsg'} = [{
469: mt => '',
470: args => [],
471: }];
472: } elsif ($action eq 'queued') {
1.46 ! raeburn 473: $outgoing->{'queuedmsg'} = [{
! 474: mt => '',
1.45 raeburn 475: args => [],
476: }];
477: $outgoing->{'queuedweb'} = '';
478: }
479: return 'ok'
480: }
481:
1.38 raeburn 482: =pod
483:
1.32 jms 484: =item create_password()
485:
486: This is called when the authentication method set for the automated
487: enrollment process when enrolling new users in the domain is "localauth".
488: This could be signalled for the specific user by the value of localauth
489: for the <authtype> tag from the classlist.xml files, or if this is blank,
490: the default authtype, set by the domain coordinator when creating the course
491: with loncreatecourse.pm.
492:
493: create_password takes three arguments -
494: (a) $authparam - the value of <autharg> from the classlist.xml files,
495: or if this blank, the default autharg, set by the domain coordinator when
496: creating the course with loncreatecourse.pm
497: (b) $dom - the domain of the new user.
498: (c) $username - the username of the new user (currently not actually used)
499:
500: Four values are returned:
501: (a) the value of $authparam - which might have been changed
502: (b) a flag to indicate whether a password had been created
503: 0 means no password created
504: 1 means password created. In this case the calling module - Enrollment.pm
505: will send the LON-CAPA username and password to the new user's e-mail
506: (if one was provided), or to the course owner (if one was not provided and
507: the new user was created by the automated process), or to the active
508: course coordinator (if the new user was created using the 'update roster
509: now' interface included in the Automated Enrollment Manager).
510: (c) a flag to indicate that the authentication method is correct - 'ok'.
511: If $authchk is not set to 'ok' then account creation and enrollment of the
512: new user will not occur.
513: (d) if a password was created it can be sent along. This is the password
514: which will be included in the e-mail sent to the new user, or made available
515: to the course owner/course coordinator if no e-mail address is provided. If
516: you do not wish to send a password, but want to give instructions on obtaining
517: one, you could set $newpasswd as those instructions. (e.g.,
518: $newpasswd = '(Please visit room 212, ACNS Bldg. to obtain your password)';
519: The value of $newpasswd is NOT written in the user's LON-CAPA passwd file in
520: /home/httpd/lonUsers/$dom/a/b/c/abcuser/passwd, which in the case of a user
521: employing localauth will contain 'localauth:$authparam'. If you need to include
522: a parameter in the user's passwd file, you should return it as $authparam,
523: i.e., the first of the variables returned by create_password().
524:
525:
526: =cut
1.4 raeburn 527:
528: sub create_password {
1.13 albertel 529: my ($authparam,$dom,$username) = @_;
1.4 raeburn 530: my $authchk = 'ok';
1.11 raeburn 531: my $newpasswd = '';
1.4 raeburn 532: my $create_passwd = 0;
1.11 raeburn 533: return ($authparam,$create_passwd,$authchk,$newpasswd);
1.1 raeburn 534: }
535:
1.32 jms 536: =pod
537:
538: =item instcode_format()
539:
540: Split coursecodes into constituent parts.
541: e.g., INSTITUTIONALCODE = fs03nop590, LON-CAPA COURSEID: 43551dedcd43febmsul1
542: (MSU's course naming scheme - fs03 = Fall semester 2003, nop =
543: department name, 590 = course number)
544:
545: Incoming data:
546: $dom (domain)
547: $$instcodes{'43551dedcd43febmsul1'} = 'fs03nop590' (hash of courseIDs)
548:
549: fs03nop590 would be split as follows
550: @{$codetitles} = ("year","semester","department","number")
1.33 bisitz 551: $$codes{'year'} = '2003'
1.32 jms 552: $$codes{'semester'} = 'Fall'
553: $$codes{'department'} = 'nop'
554: $$codes{'number'} = '590'
555:
556: requires six arguments:
557: domain ($dom)
558: reference to hash of institutional course IDs ($instcodes)
559: reference to hash of codes ($codes)
560: reference to array of titles ($codetitles)
561: reference to hash of abbreviations used in categories
562: reference to hash of arrays specifying sort order used in category titles
563:
564: e.g., %{$$cat_titles{'Semester'}} = (
565: fs => 'Fall',
566: ss => 'Spring',
567: us => 'Summer');
568:
569: e.g., @{$$cat_order{'Semester'}} = ('ss','us','fs');
570: returns 1 parameter: 'ok' if no processing errors.
1.33 bisitz 571:
572: Detailed help:
573: http://yourloncapaserver/adm/help/Institutional_Integration_Course_Codes.hlp
574:
1.32 jms 575: =cut
576:
1.10 raeburn 577:
578: sub instcode_format () {
579: my ($dom,$instcodes,$codes,$codetitles,$cat_titles,$cat_order) = @_;
580: my $outcome = 'ok';
581: return $outcome;
582: }
583:
1.35 raeburn 584: =pod
585:
586: =item possible_instcodes()
587:
588: Gather acceptable values for institutional categories to use in course creation request form for official courses.
589:
1.40 raeburn 590: requires five arguments:
591:
1.35 raeburn 592: domain ($dom)
593: reference to array of titles ($codetitles)
594: reference to hash of abbreviations used in categories ($cat_titles).
1.40 raeburn 595: reference to hash of arrays specifying sort order used in
596: category titles ($cat_order).
597: reference to array which will contain order of component parts used
598: in institutional code ($code_order).
1.35 raeburn 599:
600: e.g.,
1.40 raeburn 601: @{$codetitles} = ('Year','Semester',"Department','Number');
1.35 raeburn 602:
603: %{$$cat_titles{'Semester'}} = (
604: fs => 'Fall',
605: ss => 'Spring',
606: us => 'Summer');
607:
608: @{$$cat_order{'Semester'}} = ('ss','us','fs');
1.40 raeburn 609: @{$code_order} = ('Semester','Year','Department','Number');
1.35 raeburn 610:
611: returns 1 parameter: 'ok' if no processing errors.
612:
613: =cut
614:
615: sub possible_instcodes {
1.40 raeburn 616: my ($dom,$codetitles,$cat_titles,$cat_order,$code_order) = @_;
1.35 raeburn 617: @{$codetitles} = ();
618: %{$$cat_titles{'Semester'}} = ();
619: @{$$cat_order{'Semester'}} = ('ss','us','fs');
1.40 raeburn 620: @{$code_order} = ();
1.35 raeburn 621: return 'ok';
622: }
623:
624:
1.32 jms 625: =pod
626:
627: =item institutional_photos()
628:
629: Called when automated enrollment manager is used to update student photos.
630:
631: Incoming data: six arguments
632: (a) $dom (domain)
633: (b) $crs (LONCAPA course number)
634: (c) $affiliates: a reference to a hash with the keys set to the
635: institutional course IDs for the course.
636: (d) $result: a reference to a hash which will return usernames
637: of students (& separated) in following categories (the keys):
638: new, update, missing, same, deleted, noid, nouser. The list
639: includes those students for whom the result of the modification
640: process was either addition of a new photo. update of an
641: existing photo, photo was found to be missing from institution's
642: data store, photo used is same as before, or photo was
643: deleted from storage on LON-CAPA server housing student's
1.34 weissno 644: information, no student/employee ID was available.
1.12 raeburn 645:
1.32 jms 646: (e) $action: the type of action needed. (e.g., update, delete);
647: (f) $students: a reference to a hash with the keys set to student
648: usernames and domains in the form username:domain, and values set
649: to the studentID, if action is required for specific students.
650:
651: returns 1 parameter: 'ok' if no processing errors.
652: other course or student specific values can be stored as values
653: in the appropriate referenced hashes.
654:
655: =cut
1.12 raeburn 656:
657: sub institutional_photos {
658: my ($dom,$crs,$affiliates,$result,$action,$students) = @_;
659: my $outcome = 'ok';
660: return $outcome;
661: }
662:
1.32 jms 663: =pod
664:
665: =item photo_permission()
666:
667: Incoming data: three arguments
668: (a) $dom (domain)
669: (b) $perm_reqd: a reference to a a scalar that is either 'yes'
670: if a course owner must indicate acceptance of conditions of use,
671: 'no' otherwise.
672: (c) $conditions: the text of the conditions of use.
673:
674: returns 1 parameter: 'ok' if no processing errors.
675: $$perm_reqd is set to 'yes' or 'no'
676: $$agreement is set to conditions of use - plain text string
677: which will be displayed in a textarea in a web form.
678:
679:
680: =cut
681:
1.12 raeburn 682: sub photo_permission {
683: my ($dom,$perm_reqd,$conditions) = @_;
684: $$perm_reqd = 'no';
685: $$conditions = '';
686: my $outcome = 'ok';
687: return $outcome;
688: }
689:
1.32 jms 690: =pod
691:
692: =item manager_photo_update()
693:
694: Incoming data: one argument
695: (a) $dom (domain)
696:
697: returns 2 parameters: update (0 or 1), and comment.
698: Called by automated enrollment manager, to determine
699: whether "Update Student photos" button will be available,
700: and if so, the message (plain text string) that will be displayed
701: with the button.
1.12 raeburn 702:
1.32 jms 703:
704: =cut
1.12 raeburn 705:
706: sub manager_photo_update {
707: my ($dom) = @_;
708: my $update = 0;
709: my $comment = '';
710: return ($update,$comment);
711: }
712:
1.32 jms 713: =pod
714:
715:
716: =item check_section()
717:
718: Incoming data: three arguments (+ fourth optional argument)
719: (a) $class - institutional class id (coursecode concatanated with section)
720: (b) $owner - course owner (2.2 and later username:domain; pre-2.2 username;
721: 2.6 and later - comma-separated list of
722: username:domain for course owner and co-owners.)
723: (c) $dom - domain of course
724: (d) $dbh - optional database handle
725:
726: returns 1 parameter - $sectioncheck ('ok' or other value).
727: Verifies that at least one of the course owner (or co-owners) have access
728: to classlist for specific class according to institution's SIS
729: 'ok' if access available
730:
731:
732: =cut
1.16 raeburn 733:
734: sub check_section {
735: my ($class,$owner,$dom,$dbh) = @_;
736: my $sectioncheck = 'ok';
737: return $sectioncheck;
738: }
739:
1.32 jms 740: =pod
741:
742: =item instcode_defaults()
743:
744: Incoming data: three arguments
745: (a) $dom - domain
746: (b) $defaults - reference to hash which will contain default regular
747: expression matches for different components of an
748: institutional course code
749: (c) $code_order - reference to array which will contain order of
750: component parts used in institutional code.
751:
752: returns 1 parameter - ('ok' or other value).
753: Used to construct a regular expression to be used when searching for
754: courses based on fragments of an institutional code.
755: $defaults contains defaults to use for each component, and code_order
756: contains keys of hash in order in which they are to be concatenated.
757:
758: e.g., INSTITUTIONALCODE = fs03nop590
759: (MSU's course naming scheme - fs = semester, 03 = year, nop =
760: department name, 590 = course number)
761:
762: %{$defaults} = (
763: 'Year' => '\d{2}',
764: 'Semester' => '^[sfu]s',
765: 'Department' => '\w{2,3}',
766: 'Number' => '\d{3,4}\w?',
767: );
768:
769: @{$code_order} = ('Semester','Year','Department','Number');
770:
1.33 bisitz 771: Detailed help:
772: http://yourloncapaserver/adm/help/Institutional_Integration_Course_Codes.hlp
773:
1.32 jms 774: =cut
1.17 raeburn 775:
776: sub instcode_defaults {
777: my ($dom,$defaults,$code_order) = @_;
778: return 'ok';
779: }
780:
1.32 jms 781:
782: =pod
783:
784: =item allusers_info()
785:
786: Incoming data: three arguments
787: (a) $dom - domain
788: (b) $instusers - reference to hash which will contain hashes,
789: where keys will be usernames and value will be a
790: hash of user information. Keys in the inner hash
791: will be some or all of: lastname,firstname,
792: middlename, generation, id, inststatus -
793: institutional status (e.g., faculty,staff,student)
794: Values are all scalars except inststatus,
795: which is an array.
796: (c) $instids - reference to hash which will contain ID numbers.
797: keys will be unique IDs (student or faculty/staff ID)
798: values will be either: scalar (username) or an array
799: if a single ID matches multiple usernames.
1.43 raeburn 800: (d) $lc_users - reference to hash containing LON-CAPA usernames in
801: in domain $dom, as keys. Needed if institutional
802: data source only allows query by username.
1.32 jms 803: returns 1 parameter - 'ok' if no processing error, or other value
804: if an error occurred.
805: side effects - populates the $instusers and $instids refs to hashes.
806: with information for all users from all available
807: institutional datafeeds.
808:
809:
810: =cut
1.18 raeburn 811:
812: sub allusers_info {
1.43 raeburn 813: my ($dom,$instusers,$instids,$lc_users) = @_;
1.18 raeburn 814: my $outcome = 'ok';
815: return $outcome;
816: }
817:
1.32 jms 818: =pod
819:
820: =item get_userinfo()
821:
822: Incoming data: four required arguments and additional optional arguments
823: Two modes of operation:
824: (1) Retrieves institutional data for a single user either by username
825: if $uname is included as second argument, or by ID if $id is
826: included as a third argument. Either (b) or (c) must be provided.
827: (g), (h) and (i) will be undefined.
828: (2) Retrieves institutional user data from search of an institutional
829: directory based on a search. (g) and (h) are required.
830: (i) is optional. (b) and (c) will be undefined.
831:
832: (a) $dom - domain
833: (b) $uname - username of user
834: (c) $id - student/faculty ID of user
835: (d) $instusers - reference to hash which will contain info for user
836: as key = value; keys will be one or all of:
837: lastname,firstname,middlename,generation,id,inststatus -
838: institutional status (e.g., faculty,staff,student)
839: Values are all scalars except inststatus,
840: which is an array.
841: (e) $instids - reference to hash which will contain ID numbers -
842: keys will be unique IDs (student or faculty/staff ID)
843: values will be either: scalar (username) or an array
844: if a single ID matches multiple usernames.
845: (f) $types - optional reference to array which contains
846: institutional types to check.
847: (g) $srchby - optional if $uname or $id defined, otherwise required.
848: Allowed values include: 1. lastfirst, 2. last, 3. uname
849: corresponding to searches by 1. lastname,firstname;
850: 2. lastname; 3. username
851: (h) $srchterm - optional if $uname or $id defined, otherwise required
852: String to search for.
853: (i) $srchtype - optional. Allowed values: contains, begins (defaults
854: to exact match otherwise).
855:
856: returns 1 parameter - 'ok' if no processing error, or other value
857: if an error occurred.
858: side effects - populates the $instusers and $instids refs to hashes.
859: with information for specified username, or specified
860: id, if fifth argument provided, from all available, or
861: specified (e.g., faculty only) institutional datafeeds,
862: if sixth argument provided.
863:
864: WARNING: You need to set $outcome to 'ok' once you have customized
865: this routine to communicate with an instititional
866: directory data source, otherwise institutional directory
867: searches will always be reported as being unavailable
868: in domain $dom.
869:
870: =cut
1.18 raeburn 871:
872: sub get_userinfo {
1.21 raeburn 873: my ($dom,$uname,$id,$instusers,$instids,$types,
874: $srchby,$srchterm,$srchtype) = @_;
1.24 raeburn 875: my $outcome = 'unavailable';
1.18 raeburn 876: return $outcome;
877: }
878:
1.32 jms 879: =pod
880:
881: =item inst_usertypes()
882:
883: Incoming data: three arguments
884: (a) $dom - domain
885: (b) $usertypes - reference to hash which will contain
886: key = value, where keys are institution
887: affiliation types (e.g., Faculty, Student etc.)
888: and values are titles (e.g., Faculty/Academic Staff)
889: (c) $order - reference to array which will contain the order in
890: which institutional types should be shown
891: when displaying data tables (e.g., default quotas
892: or updateable user fields (see domainprefs.pm)
893: returns 1 parameter - 'ok' if no processing error, or other value
894: if an error occurred.
895:
896:
897: =cut
1.18 raeburn 898:
899: sub inst_usertypes {
900: my ($dom,$usertypes,$order) = @_;
1.20 raeburn 901: @{$order} = ();
902: %{$usertypes} = ();
1.18 raeburn 903: my $outcome = 'ok';
904: return $outcome;
905: }
1.17 raeburn 906:
1.32 jms 907: =pod
908:
909: =item username_rules()
910:
911: Incoming data: three arguments
912: (a) $dom - domain
913: (b) $ruleshash - reference to hash containing rules
914: (a hash of a hash)
915: keys of top level hash are short names
916: (e.g., netid, noncredit)
917: for each key, value is a hash
918: desc => long name for rule
919: rule => description of rule
920: authtype => (krb5,krb4,int, or loc)
921: authentication type for rule
922: authparm => authentication parameter for rule
923: authparmfixed => 1 if authparm used when
924: creating user for rule must be authparm
925: authmsg => Message to display describing
926: authentication to use for this rule
927:
928: (c) $rulesorder - reference to array containing rule names
929: in order to be displayed
930:
931:
932: returns 'ok' if no processing error.
1.25 raeburn 933:
1.32 jms 934: =cut
1.25 raeburn 935:
936: sub username_rules {
937: my ($dom,$ruleshash,$rulesorder) = @_;
938: my $outcome;
939: return $outcome;
940: }
941:
1.32 jms 942: =pod
943:
944: =item id_rules()
945:
946: Incoming data: three arguments
947: (a) $dom - domain
948: (b) $ruleshash - reference to hash containing rules
949: (a hash of a hash)
950: keys of top level hash are short names
951: (e.g., netid, noncredit)
952: for each key, value is a hash
953: desc => long name for rule
954: rule => description of rule
955:
956: (c) $rulesorder - reference to array containing rule names
957: in order to be displayed
958:
959: returns 'ok' if no processing error.
960:
961: =cut
1.27 raeburn 962:
1.30 raeburn 963: sub id_rules {
964: my ($dom,$ruleshash,$rulesorder) = @_;
965: my $outcome;
966: return $outcome;
967: }
968:
1.32 jms 969: =pod
970:
971: =item selfcreate_rules()
972:
973: Incoming data: three arguments
974: (a) $dom - domain
975: (b) $ruleshash - reference to hash containing rules
976: (a hash of a hash)
977: keys of top level hash are short names
978: (e.g., netid)
979: for each key, value is a hash
980: desc => long name for rule
981: rule => description of rule
982:
983: (c) $rulesorder - reference to array containing rule names
984: in order to be displayed
985:
986: returns 'ok' if no processing error.
987:
1.27 raeburn 988:
1.32 jms 989: =cut
1.30 raeburn 990:
1.31 raeburn 991: sub selfcreate_rules {
1.27 raeburn 992: my ($dom,$ruleshash,$rulesorder) = @_;
993: my $outcome;
994: return $outcome;
995: }
996:
1.32 jms 997: =pod
998:
999: =item username_check()
1000:
1001: Incoming data: four arguments
1002: (a) $dom - domain (scalar)
1003: (b) $uname - username to compare against rules (scalar)
1004: (c) $to_check (reference to array of rule names to check)
1005: (d) $resultshash (reference to hash of results)
1006: hash of results for rule checked
1007: - keys are rule names
1008: - values are: 1 or 0 (for matched or unmatched)
1009:
1010: returns 'ok' if no processing error.
1011:
1012:
1013: =cut
1.25 raeburn 1014:
1015: sub username_check {
1016: my ($dom,$uname,$to_check,$resultshash) = @_;
1017: my $outcome;
1018: return $outcome;
1019: }
1020:
1.32 jms 1021: =pod
1022:
1023: =item id_check()
1024:
1025: Incoming data: four arguments
1026: (a) $dom - domain (scalar)
1027: (b) $id - ID to compare against rules (scalar)
1028: (c) $to_check (reference to array of rule names to check)
1029: (d) $resultshash (reference to hash of results)
1030: hash of results for rule checked
1031: - keys are rule names
1032: - values are: 1 or 0 (for matched or unmatched)
1033:
1034: returns 'ok' if no processing error.
1035:
1036:
1037: =cut
1.27 raeburn 1038:
1039: sub id_check {
1040: my ($dom,$id,$to_check,$resultshash) = @_;
1041: my $outcome;
1042: return $outcome;
1043: }
1044:
1.32 jms 1045: =pod
1046:
1047: =item selfcreate_check()
1048:
1049: Incoming data: four arguments
1050: (a) $dom - domain (scalar)
1051: (b) $selfcreatename - e-mail proposed as username (compare against rules - scalar)
1052: (c) $to_check (reference to array of rule names to check)
1053: (d) $resultshash (reference to hash of results)
1054: hash of results for rule checked
1055: - keys are rule names
1056: - values are: 1 or 0 (for matched or unmatched)
1057:
1058: returns 'ok' if no processing error.
1059:
1060:
1061: =cut
1.30 raeburn 1062:
1.31 raeburn 1063: sub selfcreate_check {
1064: my ($dom,$selfcreatename,$to_check,$resultshash) = @_;
1.30 raeburn 1065: my $outcome;
1066: return $outcome;
1067: }
1068:
1.32 jms 1069: =pod
1070:
1071: =item AUTOLOAD()
1072:
1073: Incoming data: none
1074: Returns ''
1075:
1076: Prevents errors when undefined subroutines are called in this package
1077: Will allow new routines added in the future to be called from lond etc.
1078: without the need for customized versions of local*.pm packages to be
1079: modified to include the new subroutines immediately.
1080:
1081: See "Programming Perl" 3rd ed. pp 296-298.
1082:
1083: =back
1084:
1085: =cut
1.14 raeburn 1086:
1087: sub AUTOLOAD {
1088: our $AUTOLOAD;
1089: return '';
1090: }
1091:
1.1 raeburn 1092: 1;
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to localenroll.pm CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / loncom / enrollment