--- loncom/homework/functionplotresponse.pm 2011/11/21 19:48:52 1.81 +++ loncom/homework/functionplotresponse.pm 2012/08/17 13:08:11 1.98 @@ -1,7 +1,7 @@ # LearningOnline Network with CAPA # Functionplot responses # -# $Id: functionplotresponse.pm,v 1.81 2011/11/21 19:48:52 www Exp $ +# $Id: functionplotresponse.pm,v 1.98 2012/08/17 13:08:11 www Exp $ # # Copyright Michigan State University Board of Trustees # @@ -32,46 +32,124 @@ use Apache::response(); use Apache::lonlocal; use Apache::lonnet; use Apache::run; +use LONCAPA; BEGIN { &Apache::lonxml::register('Apache::functionplotresponse',('functionplotresponse','backgroundplot','spline', - 'plotobject','plotvector','functionplotvectorrule','functionplotvectorsumrule', + 'plotobject','plotvector', + 'functionplotvectorrule','functionplotvectorsumrule', + 'drawvectorsum', + 'functionplotcustomrule', 'functionplotrule','functionplotruleset', 'functionplotelements')); } # +# Use old Java or HTML5/Javascript for GeoGebra? Depends on browser! +# Return a true value if HTML5 should be used. + +sub useHTML5 { + return 1; +} + +# +# HTML5 version does not understand "_" in IDs +# +sub appid { + my ($id)=@_; + $id=~s/\_/rid/gs; + $id=~s/\W//gs; + return $id; +} + +# +# Routines to start the applet (Java) or the HTML5/JavaScript +# # There can be a number of applets on a page, each called ggbApplet_$id, # where $id is the "_"-concatenated part and responseid # sub geogebra_startcode { + my ($id,$width,$height)=@_; + if (&useHTML5()) { + return &html5_geogebra_startcode(@_); + } else { + return &java_geogebra_startcode(@_). + &java_geogebra_code_param(); + } +} + +sub geogebra_endcode { + if (&useHTML5()) { + return ''; + } else { + return &java_geogebra_endcode(); + } +} + +sub geogebra_default_parameters { my ($id)=@_; + if (&useHTML5()) { + return ''; + } else { + return &java_geogebra_default_parameters($id); + } +} +# === Java code + +sub java_geogebra_startcode { + my ($id,$width,$height)=@_; + my $appid=&appid($id); + $width=int(1.*$width); + $height=int(1.*$height); + unless ($width) { $width=700; } + unless ($height) { $height=400; } return (< + ENDSTARTCODE } -sub geogebra_endcode { +sub java_geogebra_endcode { return &Apache::lonhtmlcommon::java_not_enabled()."\n"; } +sub java_geogebra_code_param { + return ''; +} + +# === HTML5 code + +sub html5_geogebra_startcode { + my ($id,$width,$height)=@_; + my $appid=&appid($id); + $width=int(1.*$width); + $height=int(1.*$height); + unless ($width) { $width=700; } + unless ($height) { $height=400; } + my $code=&geogebra_internal_program(); + return (< +ENDSTARTCODE +} + # # This is the internal GeoGebra bytecode which defines the spline functions # -sub geogebra_spline_program { - return (< -ENDSPLINEPROGRAM +sub geogebra_internal_program { + return +'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'; } # # The standard set of parameters inside # -sub geogebra_default_parameters { +sub java_geogebra_default_parameters { my ($id)=@_; + my $appid=&appid($id); return(< @@ -92,7 +170,7 @@ sub geogebra_default_parameters { - + ENDDEFAULTPARAMETERS } @@ -107,12 +185,18 @@ sub init_script { if ($#Apache::functionplotresponse::callscripts>=0) { my $script=''; foreach my $id (@Apache::functionplotresponse::callscripts) { - $script.="if (param=='applet_$id') { loaded_$id=true; }\n"; + $script.="if (param=='ggbApplet".&appid($id)."') { loaded_$id=true; }\n"; } $script.="if (".join(' && ',map { "loaded_$_" } (@Apache::functionplotresponse::callscripts)). ") { setTimeout('ggbInitAll()',200) }"; my $calls=join("\n",map { "ggbInit_$_();" } (@Apache::functionplotresponse::callscripts)); + my $html5init=''; + if (&useHTML5()) { + $html5init= + ''; + } return (< // // 0)) { $return.=(<0)) { $return.=(<8) { $order=8; } $Apache::functionplotresponse::counter++; my $label='CSpline'.$Apache::functionplotresponse::counter; - my $output='document.ggbApplet_'.$id.'.evalCommand("'.$label.'=Spline'.$order.'['; + my $output='document.ggbApplet'.$appid.'.evalCommand("'.$label.'=Spline'.$order.'['; for (my $i=0;$i<=$#points;$i+=4) { $output.="($points[$i],$points[$i+1]),($points[$i+2],$points[$i+3]),"; } $output=~s/\,$//; $output.=']");'."\n"; for (my $i=2; $i<2*$order; $i+=2) { - $output.='document.ggbApplet_'.$id.'.setColor("'.$label.'_'.($i>=10?'{':'').$i.($i>=10?'}':'').'",0,170,0);'."\n"; + $output.='document.ggbApplet'.$appid.'.setColor("'.$label.'_'.($i>=10?'{':'').$i.($i>=10?'}':'').'",0,170,0);'."\n"; } for (my $i=1; $i<2*$order; $i+=2) { - $output.='document.ggbApplet_'.$id.'.setVisible("'.$label.'_'.($i>=10?'{':'').$i.($i>=10?'}':'').'",false);'."\n"; + $output.='document.ggbApplet'.$appid.'.setVisible("'.$label.'_'.($i>=10?'{':'').$i.($i>=10?'}':'').'",false);'."\n"; } return $output; @@ -461,6 +555,7 @@ sub answer_spline_script { sub generate_spline { my ($id,$label,$xmin,$xmax,$ymin,$ymax,$fixed)=@_; + my $appid=&appid($id); my $result=''; my $order=$Apache::functionplotresponse::splineorder{$label}; my $x=$Apache::functionplotresponse::splineinitx{$label}; @@ -477,7 +572,7 @@ sub generate_spline { $x+=$sx/(2.*($order-1)); push(@coords,$label.'S'.$i); } - $result.='document.ggbApplet_'.$id.'.evalCommand("Spline'.$order.'['.join(',',@coords).']");'."\n"; + $result.='document.ggbApplet'.$appid.'.evalCommand("Spline'.$order.'['.join(',',@coords).']");'."\n"; return $result; } @@ -543,13 +638,19 @@ sub start_plotvector { $label=~s/\W//gs; $label=ucfirst($label); unless ($label) { $label="NewVector"; } + if ($Apache::functionplotresponse::vectorlabels{$label}) { + &Apache::lonxml::warning(&mt('Vector labels must be unique: [_1]',$label)); + } + $Apache::functionplotresponse::vectorlabels{$label}=1; if ($target eq 'web') { my ($xmin,$xmax,$ymin,$ymax)=&boundaries($parstack,$safeeval,-3); unless (defined($tailx)) { $tailx=$xmin; } unless (defined($taily)) { $taily=$ymin; } unless (defined($tipx)) { $tipx=$xmin; } unless (defined($tipy)) { $tipy=$ymin; } - $result.=&plotvector_script($internalid,$label,$tailx,$taily,$tipx,$tipy,$xmin,$xmax); + my $fixed=0; + if ((&Apache::response::show_answer()) || (&Apache::response::check_status()>=2)) { $fixed=1; } + $result.=&plotvector_script($internalid,$label,$tailx,$taily,$tipx,$tipy,$xmin,$xmax,$fixed); } elsif ($target eq 'edit') { $result=&Apache::edit::tag_start($target,$token,'Plot Vector'). &Apache::edit::text_arg('Label on Plot:','label', @@ -582,6 +683,96 @@ sub end_plotvector { } +# +# Vector sum - have GeoGebra draw a sum of specified vectors to help students draw +# + +sub start_drawvectorsum { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + my $internalid = $Apache::inputtags::part.'_'.$Apache::inputtags::response[-1]; + my $internalappid=&appid($internalid); + my $tailx=&Apache::lonxml::get_param('tailx',$parstack,$safeeval); + my $taily=&Apache::lonxml::get_param('taily',$parstack,$safeeval); + my $showvalue=&Apache::lonxml::get_param('showvalue',$parstack,$safeeval); + my $vectorlist=&Apache::lonxml::get_param('vectorlist',$parstack,$safeeval); + my $label=&Apache::lonxml::get_param('label',$parstack,$safeeval); + $label=~s/\W//gs; + $label=ucfirst($label); + unless ($label) { $label="NewVector"; } + if ($target eq 'web') { + my ($xmin,$xmax,$ymin,$ymax)=&boundaries($parstack,$safeeval,-3); + unless (defined($tailx)) { $tailx=$xmin; } + unless (defined($taily)) { $taily=$ymin; } + unless (defined($vectorlist)) { $vectorlist=''; } + my @vectors=split(/\,/,$vectorlist); + if ($#vectors>0) { + my @sumx=(); + my @sumy=(); + foreach my $thisvector (@vectors) { + $thisvector=~s/\W//gs; + $thisvector=ucfirst($thisvector); + unless ($thisvector) { next; } + unless ($Apache::functionplotresponse::vectorlabels{$thisvector}) { + &Apache::lonxml::warning(&mt('Vectors must be defined before using them for drawing vector sums: [_1]',$thisvector)); + next; + } + my $vectorx=$thisvector.'X'; + my $vectory=$thisvector.'Y'; + $result.=(<'. + &Apache::edit::text_arg('Vector List:','vectorlist', + $token,'40'). + &Apache::edit::end_row(); + } elsif ($target eq 'modified') { + $env{'form.'.&Apache::edit::html_element_name('label')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('label')}); + my $constructtag=&Apache::edit::get_new_args($token,$parstack,$safeeval,'label','tailx','taily','showvalue','vectorlist'); + if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); } + } + return $result; +} + + +sub end_drawvectorsum { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + if ($target eq 'edit') { + $result=&Apache::edit::end_table(); + } + return $result; +} + + # # @@ -780,39 +971,17 @@ sub start_functionplotvectorrule { $vector=~s/\W//gs; $vector=ucfirst($vector); - my $attachpoint=&Apache::lonxml::get_param('attachpoint',$parstack,$safeeval); - $attachpoint=~s/\W//gs; - $attachpoint=ucfirst($attachpoint); - - my $notattachpoint=&Apache::lonxml::get_param('notattachpoint',$parstack,$safeeval); - $notattachpoint=~s/\W//gs; - $notattachpoint=ucfirst($notattachpoint); - - my $tailpoint=&Apache::lonxml::get_param('tailpoint',$parstack,$safeeval); - $tailpoint=~s/\W//gs; - $tailpoint=ucfirst($tailpoint); - my $tippoint=&Apache::lonxml::get_param('tippoint',$parstack,$safeeval); - $tippoint=~s/\W//gs; - $tippoint=ucfirst($tippoint); - - my $nottailpoint=&Apache::lonxml::get_param('nottailpoint',$parstack,$safeeval); - $nottailpoint=~s/\W//gs; - $nottailpoint=ucfirst($nottailpoint); - my $nottippoint=&Apache::lonxml::get_param('nottippoint',$parstack,$safeeval); - $nottippoint=~s/\W//gs; - $nottippoint=ucfirst($nottippoint); - push(@Apache::functionplotresponse::functionplotvectorrules,join(':',( $label, 'vector', $internalid, $vector, - $attachpoint, - $notattachpoint, - $tailpoint, - $tippoint, - $nottailpoint, - $nottippoint, + &Apache::lonxml::get_param('attachpoint',$parstack,$safeeval), + &Apache::lonxml::get_param('notattachpoint',$parstack,$safeeval), + &Apache::lonxml::get_param('tailpoint',$parstack,$safeeval), + &Apache::lonxml::get_param('tippoint',$parstack,$safeeval), + &Apache::lonxml::get_param('nottailpoint',$parstack,$safeeval), + &Apache::lonxml::get_param('nottippoint',$parstack,$safeeval), &Apache::lonxml::get_param('length',$parstack,$safeeval), &Apache::lonxml::get_param('angle',$parstack,$safeeval), &Apache::lonxml::get_param('lengtherror',$parstack,$safeeval), @@ -837,22 +1006,16 @@ sub start_functionplotvectorrule { &Apache::edit::text_arg('Tip not attached to object:','nottippoint', $token,'16').'
'. &Apache::edit::text_arg('Length:','length', - $token,'16'). - &Apache::edit::text_arg('Angle:','angle', - $token,'16'). + $token,'30'). &Apache::edit::text_arg('Absolute error length:','lengtherror', - $token,'8'). + $token,'8').'
'. + &Apache::edit::text_arg('Angle:','angle', + $token,'30'). &Apache::edit::text_arg('Absolute error angle:','angleerror', $token,'8'). &Apache::edit::end_row(); } elsif ($target eq 'modified') { $env{'form.'.&Apache::edit::html_element_name('vector')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('vector')}); - $env{'form.'.&Apache::edit::html_element_name('attachpoint')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('attachpoint')}); - $env{'form.'.&Apache::edit::html_element_name('notattachpoint')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('notattachpoint')}); - $env{'form.'.&Apache::edit::html_element_name('tailpoint')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('tailpoint')}); - $env{'form.'.&Apache::edit::html_element_name('tippoint')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('tippoint')}); - $env{'form.'.&Apache::edit::html_element_name('nottailpoint')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('nottailpoint')}); - $env{'form.'.&Apache::edit::html_element_name('nottippoint')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('nottippoint')}); my $constructtag=&Apache::edit::get_new_args($token,$parstack, $safeeval,'index','vector','attachpoint','notattachpoint', 'tailpoint','tippoint','nottailpoint','nottipoint', @@ -894,14 +1057,12 @@ sub start_functionplotvectorsumrule { my $id=$Apache::inputtags::response[-1]; my $partid=$Apache::inputtags::part; my $internalid = $partid.'_'.$id; - my $object=&Apache::lonxml::get_param('object',$parstack,$safeeval); - $object=~s/\W//gs; - $object=ucfirst($object); + my $vectors=&Apache::lonxml::get_param('vectors',$parstack,$safeeval); push(@Apache::functionplotresponse::functionplotvectorrules,join(':',( $label, 'sum', $internalid, - $object, + $vectors, &Apache::lonxml::get_param('length',$parstack,$safeeval), &Apache::lonxml::get_param('angle',$parstack,$safeeval), &Apache::lonxml::get_param('lengtherror',$parstack,$safeeval), @@ -911,24 +1072,23 @@ sub start_functionplotvectorsumrule { $result=&Apache::edit::tag_start($target,$token,'Function Plot Vector Sum Rule'). &Apache::edit::text_arg('Index/Name:','index', $token,'10').' '. - &Apache::edit::text_arg('Vectors attached to object:','object', - $token,'16').'
'. + &Apache::edit::text_arg('Comma-separated list of vectors:','vectors', + $token,'30').'
'. &Apache::edit::text_arg('Sum vector length:','length', - $token,'16'). + $token,'30'). + &Apache::edit::text_arg('Absolute error length:','lengtherror', + $token,'8').'
'. &Apache::edit::text_arg('Sum vector angle:','angle', - $token,'16'). - &Apache::edit::text_arg('Error length:','lengtherror', - $token,'8'). - &Apache::edit::text_arg('Error angle:','angleerror', + $token,'30'). + &Apache::edit::text_arg('Absolute error angle:','angleerror', $token,'8'). &Apache::edit::end_row(); - } elsif ($target eq 'modified') { - $env{'form.'.&Apache::edit::html_element_name('object')}=ucfirst($env{'form.'.&Apache::edit::html_element_name('object')}); - my $constructtag=&Apache::edit::get_new_args($token,$parstack, - $safeeval,'index','object', - 'length','angle', - ,'lengtherror','angleerror'); - if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); } + } elsif ($target eq 'modified') { + my $constructtag=&Apache::edit::get_new_args($token,$parstack, + $safeeval,'index','vectors', + 'length','angle', + 'lengtherror','angleerror'); + if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); } } return $result; } @@ -943,6 +1103,65 @@ sub end_functionplotvectorsumrule { } # +# +# +sub start_functionplotcustomrule { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + my $label=&Apache::lonxml::get_param('index',$parstack,$safeeval); + $Apache::functionplotresponse::counter++; + if ($label=~/\W/) { + &Apache::lonxml::warning(&mt('Rule indices should only contain alphanumeric characters.')); + } + $label=~s/\W//gs; + unless ($label) { + $label='R'.$Apache::functionplotresponse::counter; + } else { + $label='R'.$label; + } + &Apache::lonxml::register('Apache::response',('answer')); + if ($target eq 'edit') { + $result=&Apache::edit::tag_start($target,$token,'Function Plot Custom Rule'). + &Apache::edit::text_arg('Index/Name:','index',$token,'10'). + &Apache::edit::end_row(); + } elsif ($target eq 'modified') { + my $constructtag=&Apache::edit::get_new_args($token,$parstack,$safeeval,'index'); + if ($constructtag) { $result=&Apache::edit::rebuild_tag($token); } + } + return $result; +} + +sub end_functionplotcustomrule { + my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_; + my $result=''; + if ($target eq 'edit') { + $result=&Apache::edit::end_table(); + } elsif ($target eq 'grade') { +# Simply remember - in order - for later + my $label=&Apache::lonxml::get_param('index',$parstack,$safeeval); + $Apache::functionplotresponse::counter++; + if ($label=~/\W/) { + &Apache::lonxml::warning(&mt('Rule indices should only contain alphanumeric characters.')); + } + $label=~s/\W//gs; + unless ($label) { + $label='R'.$Apache::functionplotresponse::counter; + } else { + $label='R'.$label; + } + push(@Apache::functionplotresponse::functionplotvectorrules,join(':',( + $label, + 'custom', + &escape($Apache::response::custom_answer[-1]) + ))); + } + &Apache::lonxml::deregister('Apache::response',('answer')); + return $result; +} + + + +# # # # Unfortunately, GeoGebra seems to want all splines after everything else, so we need to store them @@ -1181,6 +1400,8 @@ sub start_functionplotresponse { undef %Apache::functionplotresponse::previous; $Apache::functionplotresponse::inputfields=''; $Apache::functionplotresponse::counter=0; +# Remember vectors + undef %Apache::functionplotresponse::vectorlabels; # Remember rules undef @Apache::functionplotresponse::functionplotrules; undef @Apache::functionplotresponse::functionplotvectorrules; @@ -1217,7 +1438,11 @@ sub start_functionplotresponse { .&Apache::edit::end_row() .&Apache::edit::start_spanning_row() ."\n"; - $result.=&Apache::edit::text_arg('Label x-axis:','xlabel', + $result.=&Apache::edit::text_arg('Width (pixels):','width', + $token,'6').' '. + &Apache::edit::text_arg('Height (pixels):','height', + $token,'6').'
'. + &Apache::edit::text_arg('Label x-axis:','xlabel', $token,'6').' '. &Apache::edit::text_arg('Minimum x-value:','xmin', $token,'4').' '. @@ -1240,7 +1465,7 @@ sub start_functionplotresponse { &Apache::edit::end_row().&Apache::edit::start_spanning_row(); } elsif ($target eq 'modified') { my $constructtag=&Apache::edit::get_new_args($token,$parstack, - $safeeval,'xlabel','xmin','xmax','ylabel','ymin','ymax', + $safeeval,'width','height','xlabel','xmin','xmax','ylabel','ymin','ymax', 'xaxisvisible','yaxisvisible','gridvisible','answerdisplay'); if ($constructtag) { $result = &Apache::edit::rebuild_tag($token); } @@ -1250,27 +1475,16 @@ sub start_functionplotresponse { ($env{'form.answer_output_mode'} ne 'tex') && ($Apache::lonhomework::viewgrades == 'F')) { my (undef,undef,$udom,$uname)=&Apache::lonnet::whichuser(); - my $windowopen=&Apache::lonhtmlcommon::javascript_docopen(); - my $start_page = &Apache::loncommon::start_page('Rules Log', undef, - {'only_body' => 1, - 'bgcolor' => '#FFFFFF', - 'js_ready' => 1,}); - my $end_page = &Apache::loncommon::end_page({'js_ready' => 1,}); $uname =~s/\W//g; $udom =~s/\W//g; my $function_name = join('_','LONCAPA_scriptvars',$uname,$udom, $env{'form.counter'},$Apache::lonxml::curdepth); - my $rules_var ="".&mt('Rules Log')."
"; - &Apache::lonxml::add_script_result($rules_var); - } - + &Apache::lonxml::add_script_result( + &Apache::loncommon::modal_adhoc_window($function_name,700,500, + '
'.$Apache::functionplotresponse::ruleslog.'
', + &mt('Rules Log'))."
"); + } return $result; } @@ -1358,6 +1572,43 @@ sub fpr_d2fdx2 { $arg)]; } +sub fpr_vectorcoords { + my ($arg)=@_; + $arg=~s/\W//gs; + $arg=ucfirst($arg); + my $id=$Apache::inputtags::response[-1]; + my $partid=$Apache::inputtags::part; + my $internalid = $partid.'_'.$id; + return ($env{'form.HWVAL_'.$internalid.'_'.$arg.'Start_x'}, + $env{'form.HWVAL_'.$internalid.'_'.$arg.'End_x'}, + $env{'form.HWVAL_'.$internalid.'_'.$arg.'Start_y'}, + $env{'form.HWVAL_'.$internalid.'_'.$arg.'End_y'}); +} + +sub fpr_objectcoords { + my ($arg)=@_; + $arg=~s/\W//gs; + $arg=ucfirst($arg); + my $id=$Apache::inputtags::response[-1]; + my $partid=$Apache::inputtags::part; + my $internalid = $partid.'_'.$id; + return ($env{'form.HWVAL_'.$internalid.'_'.$arg.'_x'}, + $env{'form.HWVAL_'.$internalid.'_'.$arg.'_y'}); +} + +sub fpr_vectorlength { + my ($arg)=@_; + my ($xs,$xe,$ys,$ye)=&fpr_vectorcoords($arg); + return sqrt(($xe-$xs)*($xe-$xs)+($ye-$ys)*($ye-$ys)); +} + +sub fpr_vectorangle { + my ($arg)=@_; + my ($xs,$xe,$ys,$ye)=&fpr_vectorcoords($arg); + my $angle=57.2957795*atan2(($ye-$ys),($xe-$xs)); + if ($angle<0) { $angle=360+$angle; } + return $angle; +} sub vectorcoords { my ($id,$label)=@_; @@ -1374,16 +1625,27 @@ sub objectcoords { } sub attached { - my ($id,$vector,$object,$xmin,$xmax,$ymin,$ymax)=@_; + my ($id,$vector,$objects,$xmin,$xmax,$ymin,$ymax)=@_; my ($xs,$xe,$ys,$ye)=&vectorcoords($id,$vector); - my ($xo,$yo)=&objectcoords($id,$object); my $tolx=($xmax-$xmin)/100.; my $toly=($ymax-$ymin)/100.; my $tail=0; my $tip=0; - &addlog("Proximity $vector ($xs,$xe,$ys,$ye) to $object ($xo,$yo)"); - if ((abs($xs-$xo)<$tolx) && (abs($ys-$yo)<$toly)) { $tail=1; } - if ((abs($xe-$xo)<$tolx) && (abs($ye-$yo)<$toly)) { $tip=1; } + foreach my $obj (split(/\s*\,\s*/,$objects)) { + $obj=~s/\W//g; + unless ($obj) { next; } + $obj=ucfirst($obj); + my ($xo,$yo)=&objectcoords($id,$obj); + &addlog("Proximity $vector ($xs,$ys)-($xe,$ye) to $obj ($xo,$yo)"); + if ((abs($xs-$xo)<$tolx) && (abs($ys-$yo)<$toly)) { + $tail=1; + &addlog("Attached tail: $obj"); + } + if ((abs($xe-$xo)<$tolx) && (abs($ye-$yo)<$toly)) { + $tip=1; + &addlog("Attached tip: $obj"); + } + } &addlog("Result tail:$tail tip:$tip"); return($tail,$tip); } @@ -1427,6 +1689,8 @@ sub functionplotvectorrulecheck { return &vectorcheck($rule,$xmin,$xmax,$ymin,$ymax,$safeeval); } elsif ($type eq 'sum') { return &sumcheck($rule,$xmin,$xmax,$ymin,$ymax,$safeeval); + } elsif ($type eq 'custom') { + return &customcheck($rule,$safeeval); } } @@ -1520,9 +1784,58 @@ sub vectorcheck { sub sumcheck { my ($rule,$xmin,$xmax,$ymin,$ymax,$safeeval)=@_; - my ($label,$type,$id,$object,$length,$angle,$lengtherror,$angleerror)=split(/\:/,$rule); - &addlog("Vector Sum Rule $label for vectors attached to ".$object); + my ($label,$type,$id,$vectors,$length,$angle,$lengtherror,$angleerror)=split(/\:/,$rule); + &addlog("Vector Sum Rule $label for vectors ".$vectors); + my $sumx=0; + my $sumy=0; + foreach my $sv (split(/\s*\,\s*/,$vectors)) { + my ($rx,$ry)=&relvector(&vectorcoords($id,$sv)); + $sumx+=$rx; + $sumy+=$ry; + } + &addlog("Sum vector ($sumx,$sumy)"); + if ($length ne '') { + &addlog("Checking length $length with error $lengtherror"); + $length=&Apache::run::run($length,$safeeval); + &addlog("Evaluated to $length"); + my $thislength=&vectorlength($sumx,$sumy); + &addlog("Actual length $thislength"); + if (abs($length-$thislength)>$lengtherror) { + &setfailed($label); + return 0; + } + } + if ($angle ne '') { + &addlog("Checking angle $angle with error $angleerror"); + $angle=&Apache::run::run($angle,$safeeval); + &addlog("Evaluated to $angle"); + my $thisangle=&vectorangle($sumx,$sumy); + &addlog("Actual angle $thisangle"); + my $anglediff=abs($thisangle-$angle); + &addlog("Angle difference: $anglediff"); + if ($anglediff>360.-$anglediff) { + $anglediff=360.-$anglediff; + } + &addlog("Smallest angle difference: $anglediff"); + if ($anglediff>$angleerror) { + &setfailed($label); + return 0; + } + } + &addlog("Rule $label passed."); + return 1; +} +sub customcheck { + my ($rule,$safeeval)=@_; + my ($label,$type,$prg)=split(/\:/,$rule); + &addlog("Custom Rule ".$label); + my $result=&Apache::run::run(&unescape($prg),$safeeval); + &addlog("Algorithm returned $result"); + unless ($result) { + &setfailed($label); + return 0; + } &addlog("Rule $label passed."); return 1; } @@ -1542,7 +1855,7 @@ sub functionplotrulecheck { # # Evaluate the value # - if ($value=~/\D/) { + if (($value=~/\D/) && ($value ne 'undef')) { $Apache::functionplotresponse::fpr_xmin=$xmin; $Apache::functionplotresponse::fpr_xmax=$xmax; $value=&Apache::run::run($value,$safeeval); @@ -1856,9 +2169,9 @@ sub end_functionplotelements { # generate the input fields $result.=$Apache::functionplotresponse::inputfields; # actually start the -tag - $result.=&geogebra_startcode($internalid); -# load the spline bytecode - $result.=&geogebra_spline_program(); + $result.=&geogebra_startcode($internalid, + &Apache::lonxml::get_param('width',$parstack,$safeeval,-2), + &Apache::lonxml::get_param('height',$parstack,$safeeval,-2)); # set default parameters $result.=&geogebra_default_parameters($internalid); # close the -tag