--- loncom/homework/grades.pm 2007/06/15 22:16:13 1.409
+++ loncom/homework/grades.pm 2007/10/31 18:01:34 1.473
@@ -1,7 +1,7 @@
# The LearningOnline Network with CAPA
# The LON-CAPA Grading handler
#
-# $Id: grades.pm,v 1.409 2007/06/15 22:16:13 albertel Exp $
+# $Id: grades.pm,v 1.473 2007/10/31 18:01:34 albertel Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -35,6 +35,7 @@ use Apache::loncommon;
use Apache::lonhtmlcommon;
use Apache::lonnavmaps;
use Apache::lonhomework;
+use Apache::lonpickcode;
use Apache::loncoursedata;
use Apache::lonmsg();
use Apache::Constants qw(:common);
@@ -45,36 +46,104 @@ use LONCAPA;
use POSIX qw(floor);
-my %oldessays=();
+
my %perm=();
+my %bubble_lines_per_response = (); # no. bubble lines for each response.
+ # index is "symb.part_id"
+
+my %first_bubble_line = (); # First bubble line no. for each bubble.
+
+# Save and restore the bubble lines array to the form env.
+
+
+sub save_bubble_lines {
+ foreach my $line (keys(%bubble_lines_per_response)) {
+ $env{"form.scantron.bubblelines.$line"} = $bubble_lines_per_response{$line};
+ $env{"form.scantron.first_bubble_line.$line"} =
+ $first_bubble_line{$line};
+ }
+}
+
+
+sub restore_bubble_lines {
+ my $line = 0;
+ %bubble_lines_per_response = ();
+ while ($env{"form.scantron.bubblelines.$line"}) {
+ my $value = $env{"form.scantron.bubblelines.$line"};
+ $bubble_lines_per_response{$line} = $value;
+ $first_bubble_line{$line} =
+ $env{"form.scantron.first_bubble_line.$line"};
+ $line++;
+ }
+
+}
+
+# Given the parsed scanline, get the response for
+# 'answer' number n:
+
+sub get_response_bubbles {
+ my ($parsed_line, $response) = @_;
+
+
+ my $bubble_line = $first_bubble_line{$response-1} +1;
+ my $bubble_lines= $bubble_lines_per_response{$response-1};
+
+ my $selected = "";
+
+ for (my $bline = 0; $bline < $bubble_lines; $bline++) {
+ $selected .= $$parsed_line{"scantron.$bubble_line.answer"}.":";
+ $bubble_line++;
+ }
+ return $selected;
+}
+
# ----- These first few routines are general use routines.----
+
+# Return the number of occurences of a pattern in a string.
+
+sub occurence_count {
+ my ($string, $pattern) = @_;
+
+ my @matches = ($string =~ /$pattern/g);
+
+ return scalar(@matches);
+}
+
+
+# Take a string known to have digits and convert all the
+# digits into letters in the range J,A..I.
+
+sub digits_to_letters {
+ my ($input) = @_;
+
+ my @alphabet = ('J', 'A'..'I');
+
+ my @input = split(//, $input);
+ my $output ='';
+ for (my $i = 0; $i < scalar(@input); $i++) {
+ if ($input[$i] =~ /\d/) {
+ $output .= $alphabet[$input[$i]];
+ } else {
+ $output .= $input[$i];
+ }
+ }
+ return $output;
+}
+
#
# --- Retrieve the parts from the metadata file.---
sub getpartlist {
my ($symb) = @_;
- my (undef,undef,$url) = &Apache::lonnet::decode_symb($symb);
- my $partorder = &Apache::lonnet::metadata($url, 'partorder');
- my @parts;
- if ($partorder) {
- for my $part (split (/,/,$partorder)) {
- if (!&Apache::loncommon::check_if_partid_hidden($part,$symb)) {
- push(@parts, $part);
- }
- }
- } else {
- my $metadata = &Apache::lonnet::metadata($url, 'packages');
- foreach (split(/\,/,$metadata)) {
- if ($_ =~ /^part_(.*)$/) {
- if (!&Apache::loncommon::check_if_partid_hidden($1,$symb)) {
- push(@parts, $1);
- }
- }
- }
- }
+
+ my $navmap = Apache::lonnavmaps::navmap->new();
+ my $res = $navmap->getBySymb($symb);
+ my $partlist = $res->parts();
+ my $url = $res->src();
+ my @metakeys = split(/,/,&Apache::lonnet::metadata($url,'keys'));
+
my @stores;
- foreach my $part (@parts) {
- my (@metakeys) = split(/,/,&Apache::lonnet::metadata($url,'keys'));
+ foreach my $part (@{ $partlist }) {
foreach my $key (@metakeys) {
if ($key =~ m/^stores_\Q$part\E_/) { push(@stores,$key); }
}
@@ -93,6 +162,7 @@ sub get_symb {
return ();
}
}
+ &Apache::lonenc::check_decrypt(\$symb);
return ($symb);
}
@@ -194,22 +264,54 @@ sub showResourceInfo {
return $result,$responseType,$hdgrade,$partlist,$handgrade;
}
+sub reset_caches {
+ &reset_analyze_cache();
+ &reset_perm();
+}
+
+{
+ my %analyze_cache;
-sub get_order {
- my ($partid,$respid,$symb,$uname,$udom)=@_;
- my (undef,undef,$url)=&Apache::lonnet::decode_symb($symb);
- $url=&Apache::lonnet::clutter($url);
- my $subresult=&Apache::lonnet::ssi($url,
- ('grade_target' => 'analyze'),
- ('grade_domain' => $udom),
- ('grade_symb' => $symb),
- ('grade_courseid' =>
- $env{'request.course.id'}),
- ('grade_username' => $uname));
- (undef,$subresult)=split(/_HASH_REF__/,$subresult,2);
- my %analyze=&Apache::lonnet::str2hash($subresult);
- return ($analyze{"$partid.$respid.shown"});
+ sub reset_analyze_cache {
+ undef(%analyze_cache);
+ }
+
+ sub get_analyze {
+ my ($symb,$uname,$udom)=@_;
+ my $key = "$symb\0$uname\0$udom";
+ return $analyze_cache{$key} if (exists($analyze_cache{$key}));
+
+ my (undef,undef,$url)=&Apache::lonnet::decode_symb($symb);
+ $url=&Apache::lonnet::clutter($url);
+ my $subresult=&Apache::lonnet::ssi($url,
+ ('grade_target' => 'analyze'),
+ ('grade_domain' => $udom),
+ ('grade_symb' => $symb),
+ ('grade_courseid' =>
+ $env{'request.course.id'}),
+ ('grade_username' => $uname));
+ (undef,$subresult)=split(/_HASH_REF__/,$subresult,2);
+ my %analyze=&Apache::lonnet::str2hash($subresult);
+ return $analyze_cache{$key} = \%analyze;
+ }
+
+ sub get_order {
+ my ($partid,$respid,$symb,$uname,$udom)=@_;
+ my $analyze = &get_analyze($symb,$uname,$udom);
+ return $analyze->{"$partid.$respid.shown"};
+ }
+
+ sub get_radiobutton_correct_foil {
+ my ($partid,$respid,$symb,$uname,$udom)=@_;
+ my $analyze = &get_analyze($symb,$uname,$udom);
+ foreach my $foil (@{&get_order($partid,$respid,$symb,$uname,$udom)}) {
+ if ($analyze->{"$partid.$respid.foil.value.$foil"} eq 'true') {
+ return $foil;
+ }
+ }
+ }
}
+
#--- Clean response type for display
#--- Currently filters option/rank/radiobutton/match/essay/Task
# response types only.
@@ -230,8 +332,8 @@ sub cleanRecord {
$bottomrow.='
'.$grayFont.$foil.'
';
}
return '
'.
- '
Answer
'.$toprow.'
'.
- '
'.$grayFont.'Option ID
'.
+ '
'.&mt('Answer').'
'.$toprow.'
'.
+ '
'.$grayFont.&mt('Option ID').'
'.
$grayFont.$bottomrow.'
'.'
';
} elsif ($response eq 'match') {
my %answer=&Apache::lonnet::str2hash($answer);
@@ -250,31 +352,31 @@ sub cleanRecord {
$bottomrow.='
'.$grayFont.$foil.'
';
}
return '
'.
- '
Answer
'.$toprow.'
'.
- '
'.$grayFont.'Item ID
'.
+ '
'.&mt('Answer').'
'.$toprow.'
'.
+ '
'.$grayFont.&mt('Item ID').'
'.
$middlerow.'
'.
- '
'.$grayFont.'Option ID
'.
+ '
'.$grayFont.&mt('Option ID').'
'.
$bottomrow.'
'.'
';
} elsif ($response eq 'radiobutton') {
my %answer=&Apache::lonnet::str2hash($answer);
my ($toprow,$bottomrow);
- my $correct=($order->[0])+1;
- for (my $i=1;$i<=$#$order;$i++) {
- my $foil=$order->[$i];
+ my $correct =
+ &get_radiobutton_correct_foil($partid,$respid,$symb,$uname,$udom);
+ foreach my $foil (@$order) {
if (exists($answer{$foil})) {
- if ($i == $correct) {
- $toprow.='
true
';
+ if ($foil eq $correct) {
+ $toprow.='
'.&mt('true').'
';
} else {
- $toprow.='
true
';
+ $toprow.='
'.&mt('true').'
';
}
} else {
- $toprow.='
false
';
+ $toprow.='
'.&mt('false').'
';
}
$bottomrow.='
'.$grayFont.$foil.'
';
}
return '
'.
- '
Answer
'.$toprow.'
'.
- '
'.$grayFont.'Option ID
'.
+ '
'.&mt('Answer').'
'.$toprow.'
'.
+ '
'.$grayFont.&mt('Option ID').'
'.
$grayFont.$bottomrow.'
'.'
';
} elsif ($response eq 'essay') {
if (! exists ($env{'form.'.$symb})) {
@@ -326,7 +428,10 @@ sub cleanRecord {
$result.='';
return $result;
}
-
+ } elsif ( $response =~ m/(?:numerical|formula)/) {
+ $answer =
+ &Apache::loncommon::format_previous_attempt_value('submission',
+ $answer);
}
return $answer;
}
@@ -370,8 +475,10 @@ COMMONJSFUNCTIONS
#--- Dumps the class list with usernames,list of sections,
#--- section, ids and fullnames for each user.
sub getclasslist {
- my ($getsec,$filterlist) = @_;
+ my ($getsec,$filterlist,$getgroup) = @_;
my @getsec;
+ my @getgroup;
+ my $stu_status = join(':',&Apache::loncommon::get_env_multiple('form.Status'));
if (!ref($getsec)) {
if ($getsec ne '' && $getsec ne 'all') {
@getsec=($getsec);
@@ -380,10 +487,19 @@ sub getclasslist {
@getsec=@{$getsec};
}
if (grep(/^all$/,@getsec)) { undef(@getsec); }
+ if (!ref($getgroup)) {
+ if ($getgroup ne '' && $getgroup ne 'all') {
+ @getgroup=($getgroup);
+ }
+ } else {
+ @getgroup=@{$getgroup};
+ }
+ if (grep(/^all$/,@getgroup)) { undef(@getgroup); }
- my $classlist=&Apache::loncoursedata::get_classlist();
+ my ($classlist,$keylist)=&Apache::loncoursedata::get_classlist();
# Bail out if we were unable to get the classlist
return if (! defined($classlist));
+ &Apache::loncoursedata::get_group_memberships($classlist,$keylist);
#
my %sections;
my %fullnames;
@@ -400,18 +516,40 @@ sub getclasslist {
$classlist->{$student}->[&Apache::loncoursedata::CL_FULLNAME()];
my $status =
$classlist->{$student}->[&Apache::loncoursedata::CL_STATUS()];
+ my $group =
+ $classlist->{$student}->[&Apache::loncoursedata::CL_GROUP()];
# filter students according to status selected
- if ($filterlist && $env{'form.Status'} ne 'Any') {
- if ($env{'form.Status'} ne $status) {
- delete ($classlist->{$student});
+ if ($filterlist && (!($stu_status =~ /Any/))) {
+ if (!($stu_status =~ $status)) {
+ delete($classlist->{$student});
next;
}
}
+ # filter students according to groups selected
+ my @stu_groups = split(/,/,$group);
+ if (@getgroup) {
+ my $exclude = 1;
+ foreach my $grp (@getgroup) {
+ foreach my $stu_group (@stu_groups) {
+ if ($stu_group eq $grp) {
+ $exclude = 0;
+ }
+ }
+ if (($grp eq 'none') && !$group) {
+ $exclude = 0;
+ }
+ }
+ if ($exclude) {
+ delete($classlist->{$student});
+ }
+ }
$section = ($section ne '' ? $section : 'none');
if (&canview($section)) {
if (!@getsec || grep(/^\Q$section\E$/,@getsec)) {
$sections{$section}++;
- $fullnames{$student}=$fullname;
+ if ($classlist->{$student}) {
+ $fullnames{$student}=$fullname;
+ }
} else {
delete($classlist->{$student});
}
@@ -484,6 +622,7 @@ sub student_gradeStatus {
# Shows a student's view of problem and submission
sub jscriptNform {
my ($symb) = @_;
+ my $stu_status = join(':',&Apache::loncommon::get_env_multiple('form.Status'));
my $jscript=''."\n";
$jscript.= ''."\n";
+ 'onClick="javascript:submit();" target="_self" />'."\n";
if (scalar(%$fullname) eq 0) {
my $colspan=3+scalar(@parts);
- $result='There are no students in section "'.$env{'form.section'}.
- '" with enrollment status "'.$env{'form.Status'}.'" to modify or grade.';
+ my $section_display = join (", ",&Apache::loncommon::get_env_multiple('form.section'));
+ my $stu_status = join(' or ',&Apache::loncommon::get_env_multiple('form.Status'));
+ $result=''.
+ &mt('There are no students in section(s) [_1] with enrollment status [_2] to modify or grade',
+ $section_display, $stu_status).
+ '';
}
$result.=&show_grading_menu_form($symb);
return $result;
@@ -3107,7 +3295,7 @@ sub viewstudentgrade {
''.
"\n".$ctr.'
'."\n";
$student=~s/:/_/; # colon doen't work in javascript for names
foreach my $apart (@$parts) {
@@ -3168,9 +3356,10 @@ sub editgrades {
my ($request) = @_;
my $symb=&get_symb($request);
- my $title='
Current Grade Status
';
- $title.='
Current Resource: '.$env{'form.probTitle'}.'
'."\n";
- $title.='
Section: '.$env{'form.section'}.'
'."\n";
+ my $section_display = join (", ",&Apache::loncommon::get_env_multiple('form.section'));
+ my $title='
'.
@@ -3368,7 +3557,7 @@ sub split_part_type {
my ($partstr) = @_;
my ($temp,@allparts)=split(/_/,$partstr);
my $type=pop(@allparts);
- my $part=join('.',@allparts);
+ my $part=join('_',@allparts);
return ($part,$type);
}
@@ -3471,6 +3660,7 @@ sub csvuploadmap_header {
my ($result) = &showResourceInfo($symb,$env{'form.probTitle'});
my $checked=(($env{'form.noFirstLine'})?' checked="checked"':'');
my $ignore=&mt('Ignore First Line');
+ $symb = &Apache::lonenc::check_encrypt($symb);
$request->print(<
Uploading Class Grades
@@ -3565,6 +3755,7 @@ sub upcsvScores_form {
my $upload=&mt("Upload Scores");
my $upfile_select=&Apache::loncommon::upfile_select_html();
my $ignore=&mt('Ignore First Line');
+ $symb = &Apache::lonenc::check_encrypt($symb);
$result.=<
@@ -3750,7 +3941,8 @@ sub csvuploadassign {
if ($wgt) {
$entries{$fields{$dest}}=~s/\s//g;
my $pcr=$entries{$fields{$dest}} / $wgt;
- my $award='correct_by_override';
+ my $award=($pcr == 0) ? 'incorrect_by_override'
+ : 'correct_by_override';
$grades{"resource.$part.awarded"}=$pcr;
$grades{"resource.$part.solved"}=$award;
$points{$part}=1;
@@ -3772,7 +3964,6 @@ sub csvuploadassign {
}
if (! %grades) { push(@skipped,"$username:$domain no data to save"); }
$grades{"resource.regrader"}="$env{'user.name'}:$env{'user.domain'}";
-# &Apache::lonnet::logthis(" storing ".(join('-',%grades)));
my $result=&Apache::lonnet::cstore(\%grades,$symb,
$env{'request.course.id'},
$domain,$username);
@@ -3839,7 +4030,7 @@ LISTJAVASCRIPT
$result.='
'."\n";
$result.=' Problems from:
SCANTRONFORM
}
+
+ # Chunk of the form that prompts to view a scoring office file,
+ # corrected file, skipped records in a file.
+
$r->print(<
');
+ $r->print($grading_menu_button);
return
}
+=pod
+
+=item get_scantron_config
+
+ Parse and return the scantron configuration line selected as a
+ hash of configuration file fields.
+
+ Arguments:
+ which - the name of the configuration to parse from the file.
+
+
+ Returns:
+ If the named configuration is not in the file, an empty
+ hash is returned.
+ a hash with the fields
+ name - internal name for the this configuration setup
+ description - text to display to operator that describes this config
+ CODElocation - if 0 or the string 'none'
+ - no CODE exists for this config
+ if -1 || the string 'letter'
+ - a CODE exists for this config and is
+ a string of letters
+ Unsupported value (but planned for future support)
+ if a positive integer
+ - The CODE exists as the first n items from
+ the question section of the form
+ if the string 'number'
+ - The CODE exists for this config and is
+ a string of numbers
+ CODEstart - (only matter if a CODE exists) column in the line where
+ the CODE starts
+ CODElength - length of the CODE
+ IDstart - column where the student ID number starts
+ IDlength - length of the student ID info
+ Qstart - column where the information from the bubbled
+ 'questions' start
+ Qlength - number of columns comprising a single bubble line from
+ the sheet. (usually either 1 or 10)
+ Qon - either a single character representing the character used
+ to signal a bubble was chosen in the positional setup, or
+ the string 'letter' if the letter of the chosen bubble is
+ in the final, or 'number' if a number representing the
+ chosen bubble is in the file (1->A 0->J)
+ Qoff - the character used to represent that a bubble was
+ left blank
+ PaperID - if the scanning process generates a unique number for each
+ sheet scanned the column that this ID number starts in
+ PaperIDlength - number of columns that comprise the unique ID number
+ for the sheet of paper
+ FirstName - column that the first name starts in
+ FirstNameLength - number of columns that the first name spans
+
+ LastName - column that the last name starts in
+ LastNameLength - number of columns that the last name spans
+
+=cut
+
sub get_scantron_config {
my ($which) = @_;
my $fh=Apache::File->new($Apache::lonnet::perlvar{'lonTabDir'}.'/scantronformat.tab');
@@ -4634,6 +5022,25 @@ sub get_scantron_config {
return %config;
}
+=pod
+
+=item username_to_idmap
+
+ creates a hash keyed by student id with values of the corresponding
+ student username:domain.
+
+ Arguments:
+
+ $classlist - reference to the class list hash. This is a hash
+ keyed by student name:domain whose elements are references
+ to arrays containing various chunks of information
+ about the student. (See loncoursedata for more info).
+
+ Returns
+ %idmap - the constructed hash
+
+=cut
+
sub username_to_idmap {
my ($classlist)= @_;
my %idmap;
@@ -4644,8 +5051,50 @@ sub username_to_idmap {
return %idmap;
}
+=pod
+
+=item scantron_fixup_scanline
+
+ Process a requested correction to a scanline.
+
+ Arguments:
+ $scantron_config - hash from &get_scantron_config()
+ $scan_data - hash of correction information
+ (see &scantron_getfile())
+ $line - existing scanline
+ $whichline - line number of the passed in scanline
+ $field - type of change to process
+ (either
+ 'ID' -> correct the student ID number
+ 'CODE' -> correct the CODE
+ 'answer' -> fixup the submitted answers)
+
+ $args - hash of additional info,
+ - 'ID'
+ 'newid' -> studentID to use in replacement
+ of existing one
+ - 'CODE'
+ 'CODE_ignore_dup' - set to true if duplicates
+ should be ignored.
+ 'CODE' - is new code or 'use_unfound'
+ if the existing unfound code should
+ be used as is
+ - 'answer'
+ 'response' - new answer or 'none' if blank
+ 'question' - the bubble line to change
+
+ Returns:
+ $line - the modified scanline
+
+ Side effects:
+ $scan_data - may be updated
+
+=cut
+
+
sub scantron_fixup_scanline {
my ($scantron_config,$scan_data,$line,$whichline,$field,$args)=@_;
+
if ($field eq 'ID') {
if (length($args->{'newid'}) > $$scantron_config{'IDlength'}) {
return ($line,1,'New value too large');
@@ -4702,6 +5151,25 @@ sub scantron_fixup_scanline {
return $line;
}
+=pod
+
+=item scan_data
+
+ Edit or look up an item in the scan_data hash.
+
+ Arguments:
+ $scan_data - The hash (see scantron_getfile)
+ $key - shorthand of the key to edit (actual key is
+ scantronfilename_key).
+ $data - New value of the hash entry.
+ $delete - If true, the entry is removed from the hash.
+
+ Returns:
+ The new value of the hash table field (undefined if deleted).
+
+=cut
+
+
sub scan_data {
my ($scan_data,$key,$value,$delete)=@_;
my $filename=$env{'form.scantron_selectfile'};
@@ -4712,11 +5180,69 @@ sub scan_data {
return $scan_data->{$filename.'_'.$key};
}
+=pod
+
+=item scantron_parse_scanline
+
+ Decodes a scanline from the selected scantron file
+
+ Arguments:
+ line - The text of the scantron file line to process
+ whichline - Line number
+ scantron_config - Hash describing the format of the scantron lines.
+ scan_data - Hash of extra information about the scanline
+ (see scantron_getfile for more information)
+ just_header - True if should not process question answers but only
+ the stuff to the left of the answers.
+ Returns:
+ Hash containing the result of parsing the scanline
+
+ Keys are all proceeded by the string 'scantron.'
+
+ CODE - the CODE in use for this scanline
+ useCODE - 1 if the CODE is invalid but it usage has been forced
+ by the operator
+ CODE_ignore_dup - 1 if the CODE is a duplicated use when unique
+ CODEs were selected, but the usage has been
+ forced by the operator
+ ID - student ID
+ PaperID - if used, the ID number printed on the sheet when the
+ paper was scanned
+ FirstName - first name from the sheet
+ LastName - last name from the sheet
+
+ if just_header was not true these key may also exist
+
+ missingerror - a list of bubble ranges that are considered to be answers
+ to a single question that don't have any bubbles filled in.
+ Of the form questionnumber:firstbubblenumber:count.
+ doubleerror - a list of bubble ranges that are considered to be answers
+ to a single question that have more than one bubble filled in.
+ Of the form questionnumber::firstbubblenumber:count
+
+ In the above, count is the number of bubble responses in the
+ input line needed to represent the possible answers to the question.
+ e.g. a radioresponse with 15 choices in an answer sheet with 10 choices
+ per line would have count = 2.
+
+ maxquest - the number of the last bubble line that was parsed
+
+ ( starts at 1)
+ .answer - zero or more letters representing the selected
+ letters from the scanline for the bubble line
+ .
+ if blank there was either no bubble or there where
+ multiple bubbles, (consult the keys missingerror and
+ doubleerror if this is an error condition)
+
+=cut
+
sub scantron_parse_scanline {
- my ($line,$whichline,$scantron_config,$scan_data,$justHeader)=@_;
+ my ($line,$whichline,$scantron_config,$scan_data,$just_header)=@_;
+
my %record;
- my $questions=substr($line,$$scantron_config{'Qstart'}-1);
- my $data=substr($line,0,$$scantron_config{'Qstart'}-1);
+ my $questions=substr($line,$$scantron_config{'Qstart'}-1); # Answers
+ my $data=substr($line,0,$$scantron_config{'Qstart'}-1); # earlier stuff
if (!($$scantron_config{'CODElocation'} eq 0 ||
$$scantron_config{'CODElocation'} eq 'none')) {
if ($$scantron_config{'CODElocation'} < 0 ||
@@ -4746,72 +5272,168 @@ sub scantron_parse_scanline {
$record{'scantron.LastName'}=
substr($data,$$scantron_config{'LastName'}-1,
$$scantron_config{'LastNamelength'});
- if ($justHeader) { return \%record; }
+ if ($just_header) { return \%record; }
my @alphabet=('A'..'Z');
my $questnum=0;
- while ($questions) {
+ my $ansnum =1; # Multiple 'answer lines'/question.
+
+ chomp($questions); # Get rid of any trailing \n.
+ $questions =~ s/\r$//; # Get rid of trailing \r too (MAC or Win uploads).
+ while (length($questions)) {
+ my $answers_needed = $bubble_lines_per_response{$questnum};
+ my $answer_length = $$scantron_config{'Qlength'} * $answers_needed;
+
+
+
$questnum++;
- my $currentquest=substr($questions,0,$$scantron_config{'Qlength'});
- substr($questions,0,$$scantron_config{'Qlength'})='';
- if (length($currentquest) < $$scantron_config{'Qlength'}) { next; }
+ my $currentquest = substr($questions,0,$answer_length);
+ $questions = substr($questions,0,$answer_length)='';
+ if (length($currentquest) < $answer_length) { next; }
+
+ # Qon letter implies for each slot in currentquest we have:
+ # ? or * for doubles a letter in A-Z for a bubble and
+ # about anything else (esp. a value of Qoff for missing
+ # bubbles.
+
+
if ($$scantron_config{'Qon'} eq 'letter') {
- if ($currentquest eq '?'
- || $currentquest eq '*') {
+
+ if ($currentquest =~ /\?/
+ || $currentquest =~ /\*/
+ || (&occurence_count($currentquest, "[A-Z]") > 1)) {
push(@{$record{'scantron.doubleerror'}},$questnum);
- $record{"scantron.$questnum.answer"}='';
+ for (my $ans = 0; $ans < $answers_needed; $ans++) {
+ my $bubble = substr($currentquest, $ans, 1);
+ if ($bubble =~ /[A-Z]/ ) {
+ $record{"scantron.$ansnum.answer"} = $bubble;
+ } else {
+ $record{"scantron.$ansnum.answer"}='';
+ }
+ $ansnum++;
+ }
+
} elsif (!defined($currentquest)
- || $currentquest eq $$scantron_config{'Qoff'}
- || $currentquest !~ /^[A-Z]$/) {
- $record{"scantron.$questnum.answer"}='';
+ || (&occurence_count($currentquest, $$scantron_config{'Qoff'}) == length($currentquest))
+ || (&occurence_count($currentquest, "[A-Z]") == 0)) {
+ for (my $ans = 0; $ans < $answers_needed; $ans++ ) {
+ $record{"scantron.$ansnum.answer"}='';
+ $ansnum++;
+
+ }
if (!&scan_data($scan_data,"$whichline.no_bubble.$questnum")) {
push(@{$record{"scantron.missingerror"}},$questnum);
+ # $ansnum += $answers_needed;
}
} else {
- $record{"scantron.$questnum.answer"}=$currentquest;
+ for (my $ans = 0; $ans < $answers_needed; $ans++) {
+ $record{"scantron.$ansnum.answer"} = substr($currentquest, $ans, 1);
+ $ansnum++;
+ }
}
+
+ # Qon 'number' implies each slot gives a digit that indexes the
+ # the bubbles filled or Qoff or a non number for unbubbled lines.
+ # and *? for double bubbles on a line.
+ # these answers are also stored as letters.
+
} elsif ($$scantron_config{'Qon'} eq 'number') {
- if ($currentquest eq '?'
- || $currentquest eq '*') {
+ if ($currentquest =~ /\?/
+ || $currentquest =~ /\*/
+ || (&occurence_count($currentquest, '\d') > 1)) {
push(@{$record{'scantron.doubleerror'}},$questnum);
- $record{"scantron.$questnum.answer"}='';
+ for (my $ans = 0; $ans < $answers_needed; $ans++) {
+ my $bubble = substr($currentquest, $ans, 1);
+ if ($bubble =~ /\d/) {
+ $record{"scantron.$ansnum.answer"} = $alphabet[$bubble];
+ } else {
+ $record{"scantron.$ansnum.answer"}=' ';
+ }
+ $ansnum++;
+ }
+
} elsif (!defined($currentquest)
- || $currentquest eq $$scantron_config{'Qoff'}
- || $currentquest !~ /^\d$/) {
- $record{"scantron.$questnum.answer"}='';
+ || (&occurence_count($currentquest,$$scantron_config{'Qoff'}) == length($currentquest))
+ || (&occurence_count($currentquest, '\d') == 0)) {
+ for (my $ans = 0; $ans < $answers_needed; $ans++ ) {
+ $record{"scantron.$ansnum.answer"}='';
+ $ansnum++;
+
+ }
if (!&scan_data($scan_data,"$whichline.no_bubble.$questnum")) {
push(@{$record{"scantron.missingerror"}},$questnum);
+ $ansnum += $answers_needed;
}
+
} else {
- # wrap zero back to J
- if ($currentquest eq '0') {
- $record{"scantron.$questnum.answer"}=
- $alphabet[9];
- } else {
- $record{"scantron.$questnum.answer"}=
- $alphabet[$currentquest-1];
+ $currentquest = &digits_to_letters($currentquest);
+ for (my $ans =0; $ans < $answers_needed; $ans++) {
+ $record{"scantron.$ansnum.answer"} = substr($currentquest, $ans, 1);
+ $ansnum++;
}
}
} else {
+
+ # Otherwise there's a positional notation;
+ # each bubble line requires Qlength items, and there are filled in
+ # bubbles for each case where there 'Qon' characters.
+ #
+
my @array=split($$scantron_config{'Qon'},$currentquest,-1);
- if (length($array[0]) eq $$scantron_config{'Qlength'}) {
- $record{"scantron.$questnum.answer"}='';
+
+ # If the split only giveas us one element.. the full length of the
+ # answser string, no bubbles are filled in:
+
+ if (length($array[0]) eq $$scantron_config{'Qlength'}*$answers_needed) {
+ for (my $ans = 0; $ans < $answers_needed; $ans++ ) {
+ $record{"scantron.$ansnum.answer"}='';
+ $ansnum++;
+
+ }
if (!&scan_data($scan_data,"$whichline.no_bubble.$questnum")) {
push(@{$record{"scantron.missingerror"}},$questnum);
}
- } else {
- $record{"scantron.$questnum.answer"}=
- $alphabet[length($array[0])];
+ } elsif (scalar(@array) lt 2) {
+
+ my $location = length($array[0]);
+ my $line_num = $location / $$scantron_config{'Qlength'};
+ my $bubble = $alphabet[$location % $$scantron_config{'Qlength'}];
+
+ for (my $ans = 0; $ans < $answers_needed; $ans++) {
+ if ($ans eq $line_num) {
+ $record{"scantron.$ansnum.answer"} = $bubble;
+ } else {
+ $record{"scantron.$ansnum.answer"} = ' ';
+ }
+ $ansnum++;
+ }
}
- if (scalar(@array) gt 2) {
+ # If there's more than one instance of a bubble character
+ # That's a double bubble; with positional notation we can
+ # record all the bubbles filled in as well as the
+ # fact this response consists of multiple bubbles.
+ #
+ else {
push(@{$record{'scantron.doubleerror'}},$questnum);
+
+ my $first_answer = $ansnum;
+ for (my $ans =0; $ans < $answers_needed; $ans++) {
+ my $item = $first_answer+$ans;
+ $record{"scantron.$item.answer"} = '';
+ }
+
my @ans=@array;
- my $i=length($ans[0]);shift(@ans);
+ my $i=0;
+ my $increment = 0;
while ($#ans) {
- $i+=length($ans[0])+1;
- $record{"scantron.$questnum.answer"}.=$alphabet[$i];
+ $i+=length($ans[0]) + $increment;
+ my $line = int($i/$$scantron_config{'Qlength'} + $first_answer);
+ my $bubble = $i%$$scantron_config{'Qlength'};
+ $record{"scantron.$line.answer"}.=$alphabet[$bubble];
shift(@ans);
+ $increment = 1;
}
+ $ansnum += $answers_needed;
}
}
}
@@ -4819,6 +5441,24 @@ sub scantron_parse_scanline {
return \%record;
}
+=pod
+
+=item scantron_add_delay
+
+ Adds an error message that occurred during the grading phase to a
+ queue of messages to be shown after grading pass is complete
+
+ Arguments:
+ $delayqueue - arrary ref of hash ref of error messages
+ $scanline - the scanline that caused the error
+ $errormesage - the error message
+ $errorcode - a numeric code for the error
+
+ Side Effects:
+ updates the $delayqueue to have a new hash ref of the error
+
+=cut
+
sub scantron_add_delay {
my ($delayqueue,$scanline,$errormessage,$errorcode)=@_;
push(@$delayqueue,
@@ -4827,6 +5467,24 @@ sub scantron_add_delay {
);
}
+=pod
+
+=item scantron_find_student
+
+ Finds the username for the current scanline
+
+ Arguments:
+ $scantron_record - hash result from scantron_parse_scanline
+ $scan_data - hash of correction information
+ (see &scantron_getfile() form more information)
+ $idmap - hash from &username_to_idmap()
+ $line - number of current scanline
+
+ Returns:
+ Either 'username:domain' or undef if unknown
+
+=cut
+
sub scantron_find_student {
my ($scantron_record,$scan_data,$idmap,$line)=@_;
my $scanID=$$scantron_record{'scantron.ID'};
@@ -4841,6 +5499,15 @@ sub scantron_find_student {
return undef;
}
+=pod
+
+=item scantron_filter
+
+ Filter sub for lonnavmaps, filters out hidden resources if ignore
+ hidden resources was selected
+
+=cut
+
sub scantron_filter {
my ($curres)=@_;
@@ -4857,6 +5524,15 @@ sub scantron_filter {
return 0;
}
+=pod
+
+=item scantron_process_corrections
+
+ Gets correction information out of submitted form data and corrects
+ the scanline
+
+=cut
+
sub scantron_process_corrections {
my ($r) = @_;
my %scantron_config=&get_scantron_config($env{'form.scantron_format'});
@@ -4914,12 +5590,30 @@ sub scantron_process_corrections {
}
}
+=pod
+
+=item reset_skipping_status
+
+ Forgets the current set of remember skipped scanlines (and thus
+ reverts back to considering all lines in the
+ scantron_skipped_ file)
+
+=cut
+
sub reset_skipping_status {
my ($scanlines,$scan_data)=&scantron_getfile();
&scan_data($scan_data,'remember_skipping',undef,1);
&scantron_putfile(undef,$scan_data);
}
+=pod
+
+=item start_skipping
+
+ Marks a scanline to be skipped.
+
+=cut
+
sub start_skipping {
my ($scan_data,$i)=@_;
my %remembered=split(':',&scan_data($scan_data,'remember_skipping'));
@@ -4931,6 +5625,14 @@ sub start_skipping {
&scan_data($scan_data,'remember_skipping',join(':',%remembered));
}
+=pod
+
+=item should_be_skipped
+
+ Checks whether a scanline should be skipped.
+
+=cut
+
sub should_be_skipped {
my ($scanlines,$scan_data,$i)=@_;
if ($env{'form.scantron_options_redo'} !~ /^redo_/) {
@@ -4946,6 +5648,15 @@ sub should_be_skipped {
return 1;
}
+=pod
+
+=item remember_current_skipped
+
+ Discovers what scanlines are in the scantron_skipped_
+ file and remembers them into scan_data for later use.
+
+=cut
+
sub remember_current_skipped {
my ($scanlines,$scan_data)=&scantron_getfile();
my %to_remember;
@@ -4959,6 +5670,16 @@ sub remember_current_skipped {
&scantron_putfile(undef,$scan_data);
}
+=pod
+
+=item check_for_error
+
+ Checks if there was an error when attempting to remove a specific
+ scantron_.. bubble sheet data file. Prints out an error if
+ something went wrong.
+
+=cut
+
sub check_for_error {
my ($r,$result)=@_;
if ($result ne 'ok' && $result ne 'not_found' ) {
@@ -4966,6 +5687,15 @@ sub check_for_error {
}
}
+=pod
+
+=item scantron_warning_screen
+
+ Interstitial screen to make sure the operator has selected the
+ correct options before we start the validation phase.
+
+=cut
+
sub scantron_warning_screen {
my ($button_text)=@_;
my $title=&Apache::lonnet::gettitle($env{'form.selectpage'});
@@ -4998,6 +5728,15 @@ $CODElist
STUFF
}
+=pod
+
+=item scantron_do_warning
+
+ Check if the operator has picked something for all required
+ fields. Error out if something is missing.
+
+=cut
+
sub scantron_do_warning {
my ($r)=@_;
my ($symb)=&get_symb($r);
@@ -5029,6 +5768,14 @@ STUFF
return '';
}
+=pod
+
+=item scantron_form_start
+
+ html hidden input for remembering all selected grading options
+
+=cut
+
sub scantron_form_start {
my ($max_bubble)=@_;
my $result= <
SCANTRONFORM
+
+ my $line = 0;
+ while (defined($env{"form.scantron.bubblelines.$line"})) {
+ my $chunk =
+ ''."\n";
+ $chunk .=
+ ''."\n";
+ $result .= $chunk;
+ $line++;
+ }
return $result;
}
+=pod
+
+=item scantron_validate_file
+
+ Dispatch routine for doing validation of a bubble sheet data file.
+
+ Also processes any necessary information resets that need to
+ occur before validation begins (ignore previous corrections,
+ restarting the skipped records processing)
+
+=cut
+
sub scantron_validate_file {
my ($r) = @_;
my ($symb)=&get_symb($r);
@@ -5053,7 +5822,7 @@ sub scantron_validate_file {
my $default_form_data=&defaultFormData($symb);
# do the detection of only doing skipped records first befroe we delete
- # them when doing the corrections reset
+ # them when doing the corrections reset
if ($env{'form.scantron_options_redo'} ne 'redo_skipped_ready') {
&reset_skipping_status();
}
@@ -5072,7 +5841,7 @@ sub scantron_validate_file {
if ($env{'form.scantron_corrections'}) {
&scantron_process_corrections($r);
}
- $r->print("
Gathering neccessary info.
");$r->rflush();
+ $r->print("
Gathering necessary info.
");$r->rflush();
#get the student pick code ready
$r->print(&Apache::loncommon::studentbrowser_javascript());
my $max_bubble=&scantron_get_maxbubble();
@@ -5089,6 +5858,7 @@ sub scantron_validate_file {
}
my $currentphase=$env{'form.validatepass'};
+
my $stop=0;
while (!$stop && $currentphase < scalar(@validate_phases)) {
$r->print("
Validating ".$validate_phases[$currentphase]."
");
@@ -5129,6 +5899,17 @@ STUFF
return '';
}
+
+=pod
+
+=item scantron_remove_file
+
+ Removes the requested bubble sheet data file, makes sure that
+ scantron_original_ is never removed
+
+
+=cut
+
sub scantron_remove_file {
my ($which)=@_;
my $cname=$env{'course.'.$env{'request.course.id'}.'.num'};
@@ -5143,6 +5924,18 @@ sub scantron_remove_file {
return &Apache::lonnet::removeuserfile($cname,$cdom,$file);
}
+
+=pod
+
+=item scantron_remove_scan_data
+
+ Removes all scan_data correction for the requested bubble sheet
+ data file. (In the case that both the are doing skipped records we need
+ to remember the old skipped lines for the time being so that element
+ persists for a while.)
+
+=cut
+
sub scantron_remove_scan_data {
my $cname=$env{'course.'.$env{'request.course.id'}.'.num'};
my $cdom=$env{'course.'.$env{'request.course.id'}.'.domain'};
@@ -5165,6 +5958,51 @@ sub scantron_remove_scan_data {
return $result;
}
+
+=pod
+
+=item scantron_getfile
+
+ Fetches the requested bubble sheet data file (all 3 versions), and
+ the scan_data hash
+
+ Arguments:
+ None
+
+ Returns:
+ 2 hash references
+
+ - first one has
+ orig -
+ corrected -
+ skipped - each of which points to an array ref of the specified
+ file broken up into individual lines
+ count - number of scanlines
+
+ - second is the scan_data hash possible keys are
+ ($number refers to scanline numbered $number and thus the key affects
+ only that scanline
+ $bubline refers to the specific bubble line element and the aspects
+ refers to that specific bubble line element)
+
+ $number.user - username:domain to use
+ $number.CODE_ignore_dup
+ - ignore the duplicate CODE error
+ $number.useCODE
+ - use the CODE in the scanline as is
+ $number.no_bubble.$bubline
+ - it is valid that there is no bubbled in bubble
+ at $number $bubline
+ remember_skipping
+ - a frozen hash containing keys of $number and values
+ of either
+ 1 - we are on a 'do skipped records pass' and plan
+ on processing this line
+ 2 - we are on a 'do skipped records pass' and this
+ scanline has been marked to skip yet again
+
+=cut
+
sub scantron_getfile {
#FIXME really would prefer a scantron directory
my $cname=$env{'course.'.$env{'request.course.id'}.'.num'};
@@ -5197,6 +6035,21 @@ sub scantron_getfile {
return (\%scanlines,\%scan_data);
}
+=pod
+
+=item lonnet_putfile
+
+ Wrapper routine to call &Apache::lonnet::finishuserfileupload
+
+ Arguments:
+ $contents - data to store
+ $filename - filename to store $contents into
+
+ Returns:
+ result value from &Apache::lonnet::finishuserfileupload
+
+=cut
+
sub lonnet_putfile {
my ($contents,$filename)=@_;
my $docuname=$env{'course.'.$env{'request.course.id'}.'.num'};
@@ -5206,6 +6059,22 @@ sub lonnet_putfile {
}
+=pod
+
+=item scantron_putfile
+
+ Stores the current version of the bubble sheet data files, and the
+ scan_data hash. (Does not modify the original version only the
+ corrected and skipped versions.
+
+ Arguments:
+ $scanlines - hash ref that looks like the first return value from
+ &scantron_getfile()
+ $scan_data - hash ref that looks like the second return value from
+ &scantron_getfile()
+
+=cut
+
sub scantron_putfile {
my ($scanlines,$scan_data) = @_;
#FIXME really would prefer a scantron directory
@@ -5226,6 +6095,28 @@ sub scantron_putfile {
&Apache::lonnet::put('nohist_scantrondata',$scan_data,$cdom,$cname);
}
+=pod
+
+=item scantron_get_line
+
+ Returns the correct version of the scanline
+
+ Arguments:
+ $scanlines - hash ref that looks like the first return value from
+ &scantron_getfile()
+ $scan_data - hash ref that looks like the second return value from
+ &scantron_getfile()
+ $i - number of the requested line (starts at 0)
+
+ Returns:
+ A scanline, (either the original or the corrected one if it
+ exists), or undef if the requested scanline should be
+ skipped. (Either because it's an skipped scanline, or it's an
+ unskipped scanline and we are not doing a 'do skipped scanlines'
+ pass.
+
+=cut
+
sub scantron_get_line {
my ($scanlines,$scan_data,$i)=@_;
if (&should_be_skipped($scanlines,$scan_data,$i)) { return undef; }
@@ -5234,6 +6125,23 @@ sub scantron_get_line {
return $scanlines->{'orig'}[$i];
}
+=pod
+
+=item scantron_todo_count
+
+ Counts the number of scanlines that need processing.
+
+ Arguments:
+ $scanlines - hash ref that looks like the first return value from
+ &scantron_getfile()
+ $scan_data - hash ref that looks like the second return value from
+ &scantron_getfile()
+
+ Returns:
+ $count - number of scanlines to process
+
+=cut
+
sub get_todo_count {
my ($scanlines,$scan_data)=@_;
my $count=0;
@@ -5245,6 +6153,25 @@ sub get_todo_count {
return $count;
}
+=pod
+
+=item scantron_put_line
+
+ Updates the 'corrected' or 'skipped' versions of the bubble sheet
+ data file.
+
+ Arguments:
+ $scanlines - hash ref that looks like the first return value from
+ &scantron_getfile()
+ $scan_data - hash ref that looks like the second return value from
+ &scantron_getfile()
+ $i - line number to update
+ $newline - contents of the updated scanline
+ $skip - if true make the line for skipping and update the
+ 'skipped' file
+
+=cut
+
sub scantron_put_line {
my ($scanlines,$scan_data,$i,$newline,$skip)=@_;
if ($skip) {
@@ -5255,6 +6182,21 @@ sub scantron_put_line {
$scanlines->{'corrected'}[$i]=$newline;
}
+=pod
+
+=item scantron_clear_skip
+
+ Remove a line from the 'skipped' file
+
+ Arguments:
+ $scanlines - hash ref that looks like the first return value from
+ &scantron_getfile()
+ $scan_data - hash ref that looks like the second return value from
+ &scantron_getfile()
+ $i - line number to update
+
+=cut
+
sub scantron_clear_skip {
my ($scanlines,$scan_data,$i)=@_;
if (exists($scanlines->{'skipped'}[$i])) {
@@ -5264,6 +6206,15 @@ sub scantron_clear_skip {
return 0;
}
+=pod
+
+=item scantron_filter_not_exam
+
+ Filter routine used by &Apache::lonnavmaps::retrieveResources(), to
+ filter out resources that are not marked as 'exam' mode
+
+=cut
+
sub scantron_filter_not_exam {
my ($curres)=@_;
@@ -5280,6 +6231,15 @@ sub scantron_filter_not_exam {
return 0;
}
+=pod
+
+=item scantron_validate_sequence
+
+ Validates the selected sequence, checking for resource that are
+ not set to exam mode.
+
+=cut
+
sub scantron_validate_sequence {
my ($r,$currentphase) = @_;
@@ -5303,6 +6263,15 @@ sub scantron_validate_sequence {
return (0,$currentphase+1);
}
+=pod
+
+=item scantron_validate_ID
+
+ Validates all scanlines in the selected file to not have any
+ invalid or underspecified student IDs
+
+=cut
+
sub scantron_validate_ID {
my ($r,$currentphase) = @_;
@@ -5313,6 +6282,8 @@ sub scantron_validate_ID {
#get scantron line setup
my %scantron_config=&get_scantron_config($env{'form.scantron_format'});
my ($scanlines,$scan_data)=&scantron_getfile();
+
+ &scantron_get_maxbubble(); # parse needs the bubble_lines.. array.
my %found=('ids'=>{},'usernames'=>{});
for (my $i=0;$i<=$scanlines->{'count'};$i++) {
@@ -5365,10 +6336,40 @@ sub scantron_validate_ID {
return (0,$currentphase+1);
}
+=pod
+
+=item scantron_get_correction
+
+ Builds the interface screen to interact with the operator to fix a
+ specific error condition in a specific scanline
+
+ Arguments:
+ $r - Apache request object
+ $i - number of the current scanline
+ $scan_record - hash ref as returned from &scantron_parse_scanline()
+ $scan_config - hash ref as returned from &get_scantron_config()
+ $line - full contents of the current scanline
+ $error - error condition, valid values are
+ 'incorrectCODE', 'duplicateCODE',
+ 'doublebubble', 'missingbubble',
+ 'duplicateID', 'incorrectID'
+ $arg - extra information needed
+ For errors:
+ - duplicateID - paper number that this studentID was seen before on
+ - duplicateCODE - array ref of the paper numbers this CODE was
+ seen on before
+ - incorrectCODE - current incorrect CODE
+ - doublebubble - array ref of the bubble lines that have double
+ bubble errors
+ - missingbubble - array ref of the bubble lines that have missing
+ bubble errors
+
+=cut
+
sub scantron_get_correction {
my ($r,$i,$scan_record,$scan_config,$line,$error,$arg)=@_;
-#FIXME in the case of a duplicated ID the previous line, probaly need
+#FIXME in the case of a duplicated ID the previous line, probably need
#to show both the current line and the previous one and allow skipping
#the previous one or the current one
@@ -5467,8 +6468,10 @@ ENDSCRIPT
$r->print($message);
$r->print("
Please indicate which bubble should be used for grading
");
foreach my $question (@{$arg}) {
- my $selected=$$scan_record{"scantron.$question.answer"};
- &scantron_bubble_selector($r,$scan_config,$question,split('',$selected));
+ my $selected = &get_response_bubbles($scan_record, $question);
+ my @select_array = split(/:/,$selected);
+ &scantron_bubble_selector($r,$scan_config,$question,
+ @select_array);
}
} elsif ($error eq 'missingbubble') {
$r->print("
There have been no bubbles scanned for some question(s)
\n");
@@ -5478,8 +6481,9 @@ ENDSCRIPT
$r->print('');
foreach my $question (@{$arg}) {
- my $selected=$$scan_record{"scantron.$question.answer"};
- &scantron_bubble_selector($r,$scan_config,$question);
+ my $selected = &get_response_bubbles($scan_record, $question);
+ my @select_array = split(/:/,$selected); # ought to be an array of empties.
+ &scantron_bubble_selector($r,$scan_config,$question, @select_array);
}
} else {
$r->print("\n
");
@@ -5488,32 +6492,98 @@ ENDSCRIPT
}
+=pod
+
+=item scantron_bubble_selector
+
+ Generates the html radiobuttons to correct a single bubble line
+ possibly showing the existing the selected bubbles if known
+
+ Arguments:
+ $r - Apache request object
+ $scan_config - hash from &get_scantron_config()
+ $quest - number of the bubble line to make a corrector for
+ @lines - array of answer lines.
+
+=cut
+
sub scantron_bubble_selector {
- my ($r,$scan_config,$quest,@selected)=@_;
+ my ($r,$scan_config,$quest,@lines)=@_;
my $max=$$scan_config{'Qlength'};
+
my $scmode=$$scan_config{'Qon'};
+
+ my $bubble_length = scalar(@lines);
+
+
if ($scmode eq 'number' || $scmode eq 'letter') { $max=10; }
+ my $response = $quest-1;
+ my $lines = $bubble_lines_per_response{$response};
+
+ my $total_lines = $lines*2;
my @alphabet=('A'..'Z');
- $r->print("
$quest
");
- for (my $i=0;$i<$max+1;$i++) {
- $r->print("\n".'
');
- for (my $i=0;$i<$max;$i++) {
- $r->print("\n".
- '
");
- }
- $r->print('
');
+
+ }
+
+ $r->print('
');
+
+ # FIXME: This may have to be a bit more clever for
+ # multiline questions (different values e.g..).
+
+ for (my $i=0;$i<$max;$i++) {
+ $r->print("\n".
+ '
'.$alphabet[$i]."
");
+ }
+ $r->print('
');
+
+
+ }
+ $r->print('
');
}
+=pod
+
+=item num_matches
+
+ Counts the number of characters that are the same between the two arguments.
+
+ Arguments:
+ $orig - CODE from the scanline
+ $code - CODE to match against
+
+ Returns:
+ $count - integer count of the number of same characters between the
+ two arguments
+
+=cut
+
sub num_matches {
my ($orig,$code) = @_;
my @code=split(//,$code);
@@ -5525,6 +6595,26 @@ sub num_matches {
return $same;
}
+=pod
+
+=item scantron_get_closely_matching_CODEs
+
+ Cycles through all CODEs and finds the set that has the greatest
+ number of same characters as the provided CODE
+
+ Arguments:
+ $allcodes - hash ref returned by &get_codes()
+ $CODE - CODE from the current scanline
+
+ Returns:
+ 2 element list
+ - first elements is number of how closely matching the best fit is
+ (5 means best set has 5 matching characters)
+ - second element is an arrary ref containing the set of valid CODEs
+ that best fit the passed in CODE
+
+=cut
+
sub scantron_get_closely_matching_CODEs {
my ($allcodes,$CODE)=@_;
my @CODEs;
@@ -5535,6 +6625,23 @@ sub scantron_get_closely_matching_CODEs
return ($#CODEs,$CODEs[-1]);
}
+=pod
+
+=item get_codes
+
+ Builds a hash which has keys of all of the valid CODEs from the selected
+ set of remembered CODEs.
+
+ Arguments:
+ $old_name - name of the set of remembered CODEs
+ $cdom - domain of the course
+ $cnum - internal course name
+
+ Returns:
+ %allcodes - keys are the valid CODEs, values are all 1
+
+=cut
+
sub get_codes {
my ($old_name, $cdom, $cnum) = @_;
if (!$old_name) {
@@ -5557,6 +6664,16 @@ sub get_codes {
return %allcodes;
}
+=pod
+
+=item scantron_validate_CODE
+
+ Validates all scanlines in the selected file to not have any
+ invalid or underspecified CODEs and that none of the codes are
+ duplicated if this was requested.
+
+=cut
+
sub scantron_validate_CODE {
my ($r,$currentphase) = @_;
my %scantron_config=&get_scantron_config($env{'form.scantron_format'});
@@ -5574,6 +6691,8 @@ sub scantron_validate_CODE {
my %allcodes=&get_codes();
+ &scantron_get_maxbubble(); # parse needs the lines per response array.
+
my ($scanlines,$scan_data)=&scantron_getfile();
for (my $i=0;$i<=$scanlines->{'count'};$i++) {
my $line=&scantron_get_line($scanlines,$scan_data,$i);
@@ -5608,6 +6727,15 @@ sub scantron_validate_CODE {
return (0,$currentphase+1);
}
+=pod
+
+=item scantron_validate_doublebubble
+
+ Validates all scanlines in the selected file to not have any
+ bubble lines with multiple bubbles marked.
+
+=cut
+
sub scantron_validate_doublebubble {
my ($r,$currentphase) = @_;
#get student info
@@ -5617,6 +6745,9 @@ sub scantron_validate_doublebubble {
#get scantron line setup
my %scantron_config=&get_scantron_config($env{'form.scantron_format'});
my ($scanlines,$scan_data)=&scantron_getfile();
+
+ &scantron_get_maxbubble(); # parse needs the bubble line array.
+
for (my $i=0;$i<=$scanlines->{'count'};$i++) {
my $line=&scantron_get_line($scanlines,$scan_data,$i);
if ($line=~/^[\s\cz]*$/) { next; }
@@ -5631,32 +6762,100 @@ sub scantron_validate_doublebubble {
return (0,$currentphase+1);
}
+=pod
+
+=item scantron_get_maxbubble
+
+ Returns the maximum number of bubble lines that are expected to
+ occur. Does this by walking the selected sequence rendering the
+ resource and then checking &Apache::lonxml::get_problem_counter()
+ for what the current value of the problem counter is.
+
+ Caches the results to $env{'form.scantron_maxbubble'},
+ $env{'form.scantron.bubble_lines.n'} and
+ $env{'form.scantron.first_bubble_line.n'}
+ which are the total number of bubble, lines, the number of bubble
+ lines for reponse n and number of the first bubble line for response n.
+
+=cut
+
sub scantron_get_maxbubble {
if (defined($env{'form.scantron_maxbubble'}) &&
$env{'form.scantron_maxbubble'}) {
+ &restore_bubble_lines();
return $env{'form.scantron_maxbubble'};
}
- my $navmap=Apache::lonnavmaps::navmap->new();
- my (undef,undef,$sequence)=
+ my (undef, undef, $sequence) =
&Apache::lonnet::decode_symb($env{'form.selectpage'});
+ my $navmap=Apache::lonnavmaps::navmap->new();
my $map=$navmap->getResourceByUrl($sequence);
my @resources=$navmap->retrieveResources($map,\&scantron_filter,1,0);
&Apache::lonxml::clear_problem_counter();
+ my $uname = $env{'form.student'};
+ my $udom = $env{'form.userdom'};
+ my $cid = $env{'request.course.id'};
+ my $total_lines = 0;
+ %bubble_lines_per_response = ();
+ %first_bubble_line = ();
+
+
+ my $response_number = 0;
+ my $bubble_line = 0;
foreach my $resource (@resources) {
+ my $symb = $resource->symb();
+ &Apache::lonxml::clear_bubble_lines_for_part();
my $result=&Apache::lonnet::ssi($resource->src(),
- ('symb' => $resource->symb()));
+ ('symb' => $resource->symb()),
+ ('grade_target' => 'analyze'),
+ ('grade_courseid' => $cid),
+ ('grade_domain' => $udom),
+ ('grade_username' => $uname));
+ my (undef, $an) =
+ split(/_HASH_REF__/,$result, 2);
+
+ my %analysis = &Apache::lonnet::str2hash($an);
+
+
+
+ foreach my $part_id (@{$analysis{'parts'}}) {
+
+
+ my $lines = $analysis{"$part_id.bubble_lines"};;
+
+ # TODO - make this a persistent hash not an array.
+
+
+ $first_bubble_line{$response_number} = $bubble_line;
+ $bubble_lines_per_response{$response_number} = $lines;
+ $response_number++;
+
+ $bubble_line += $lines;
+ $total_lines += $lines;
+ }
+
}
&Apache::lonnet::delenv('scantron\.');
- $env{'form.scantron_maxbubble'} =
- &Apache::lonxml::get_problem_counter()-1;
+ &save_bubble_lines();
+ $env{'form.scantron_maxbubble'} =
+ $total_lines;
return $env{'form.scantron_maxbubble'};
}
+=pod
+
+=item scantron_validate_missingbubbles
+
+ Validates all scanlines in the selected file to not have any
+ answers that don't have bubbles that have not been verified
+ to be bubble free.
+
+=cut
+
sub scantron_validate_missingbubbles {
my ($r,$currentphase) = @_;
#get student info
@@ -5675,6 +6874,9 @@ sub scantron_validate_missingbubbles {
$scan_data);
if (!defined($$scan_record{'scantron.missingerror'})) { next; }
my @to_correct;
+
+ # Probably here's where the error is...
+
foreach my $missing (@{$$scan_record{'scantron.missingerror'}}) {
if ($missing > $max_bubble) { next; }
push(@to_correct,$missing);
@@ -5689,6 +6891,30 @@ sub scantron_validate_missingbubbles {
return (0,$currentphase+1);
}
+=pod
+
+=item scantron_process_students
+
+ Routine that does the actual grading of the bubble sheet information.
+
+ The parsed scanline hash is added to %env
+
+ Then foreach unskipped scanline it does an &Apache::lonnet::ssi()
+ foreach resource , with the form data of
+
+ 'submitted' =>'scantron'
+ 'grade_target' =>'grade',
+ 'grade_username'=> username of student
+ 'grade_domain' => domain of student
+ 'grade_courseid'=> of course
+ 'grade_symb' => symb of resource to grade
+
+ This triggers a grading pass. The problem grading code takes care
+ of converting the bubbled letter information (now in %env) into a
+ valid submission.
+
+=cut
+
sub scantron_process_students {
my ($r) = @_;
my (undef,undef,$sequence)=&Apache::lonnet::decode_symb($env{'form.selectpage'});
@@ -5723,6 +6949,9 @@ SCANTRONFORM
my $start=&Time::HiRes::time();
my $i=-1;
my ($uname,$udom,$started);
+
+ &scantron_get_maxbubble(); # Need the bubble lines array to parse.
+
while ($i<$scanlines->{'count'}) {
($uname,$udom)=('','');
$i++;
@@ -5773,8 +7002,6 @@ SCANTRONFORM
}
my $result=&Apache::lonnet::ssi($resource->src(),%form);
if ($result ne '') {
- &Apache::lonnet::logthis("scantron grading error -> $result");
- &Apache::lonnet::logthis("scantron grading error info name $uname domain $udom course $env{'request.course.id'} url ".$resource->src());
}
if (&Apache::loncommon::connection_aborted($r)) { last; }
}
@@ -5793,6 +7020,14 @@ SCANTRONFORM
return '';
}
+=pod
+
+=item scantron_upload_scantron_data
+
+ Creates the screen for adding a new bubble sheet data file to a course.
+
+=cut
+
sub scantron_upload_scantron_data {
my ($r)=@_;
$r->print(&Apache::loncommon::coursebrowser_javascript($env{'request.role.domain'}));
@@ -5829,6 +7064,15 @@ UPLOAD
return '';
}
+=pod
+
+=item scantron_upload_scantron_data_save
+
+ Adds a provided bubble information data file to the course if user
+ has the correct privileges to do so.
+
+=cut
+
sub scantron_upload_scantron_data_save {
my($r)=@_;
my ($symb)=&get_symb($r,1);
@@ -5884,6 +7128,14 @@ sub scantron_upload_scantron_data_save {
return '';
}
+=pod
+
+=item valid_file
+
+ Validates that the requested bubble data file exists in the course.
+
+=cut
+
sub valid_file {
my ($requested_file)=@_;
foreach my $filename (sort(&scantron_filenames())) {
@@ -5892,6 +7144,16 @@ sub valid_file {
return 0;
}
+=pod
+
+=item scantron_download_scantron_data
+
+ Shows a list of the three internal files (original, corrected,
+ skipped) for a specific bubble sheet data file that exists in the
+ course.
+
+=cut
+
sub scantron_download_scantron_data {
my ($r)=@_;
my $default_form_data=&defaultFormData(&get_symb($r,1));
@@ -5928,6 +7190,12 @@ DOWNLOAD
return '';
}
+=pod
+
+=back
+
+=cut
+
#-------- end of section for handling grading scantron forms -------
#
#-------------------------------------------------------------------
@@ -5938,7 +7206,7 @@ DOWNLOAD
sub show_grading_menu_form {
my ($symb)=@_;
my $result.='
'."\n".
- ''."\n".
+ ''."\n".
''."\n".
''."\n".
''."\n".
@@ -5958,8 +7226,128 @@ sub savedState {
return \%savedState;
}
-#--- Displays the main menu page -------
-sub gradingmenu {
+sub grading_menu {
+ my ($request) = @_;
+ my ($symb)=&get_symb($request);
+ if (!$symb) {return '';}
+ my $probTitle = &Apache::lonnet::gettitle($symb);
+ my ($table,undef,$hdgrade) = &showResourceInfo($symb,$probTitle);
+
+ $request->print($table);
+ my %fields = ('symb'=>&Apache::lonenc::check_encrypt($symb),
+ 'handgrade'=>$hdgrade,
+ 'probTitle'=>$probTitle,
+ 'command'=>'submit_options',
+ 'saveState'=>"",
+ 'gradingMenu'=>1,
+ 'showgrading'=>"yes");
+ my $url = &Apache::lonhtmlcommon::build_url('grades/',\%fields);
+ my @menu = ({ url => $url,
+ name => &mt('Manual Grading/View Submissions'),
+ short_description =>
+ &mt('Start the process of hand grading submissions.'),
+ });
+ $fields{'command'} = 'csvform';
+ $url = &Apache::lonhtmlcommon::build_url('grades/',\%fields);
+ push (@menu, { url => $url,
+ name => &mt('Upload Scores'),
+ short_description =>
+ &mt('Specify a file containing the class scores for current resource.')});
+ $fields{'command'} = 'processclicker';
+ $url = &Apache::lonhtmlcommon::build_url('grades/',\%fields);
+ push (@menu, { url => $url,
+ name => &mt('Process Clicker'),
+ short_description =>
+ &mt('Specify a file containing the clicker information for this resource.')});
+ $fields{'command'} = 'scantron_selectphase';
+ $url = &Apache::lonhtmlcommon::build_url('grades/',\%fields);
+ push (@menu, { url => $url,
+ name => &mt('Grade/Manage Scantron Forms'),
+ short_description =>
+ &mt('')});
+ $fields{'command'} = 'verify';
+ $url = &Apache::lonhtmlcommon::build_url('grades/',\%fields);
+ push (@menu, { url => "",
+ name => &mt('Verify Receipt'),
+ short_description =>
+ &mt('')});
+ #
+ # Create the menu
+ my $Str;
+ # $Str .= '
+
+ '.
+ &mt('Select individual students to grade and view submissions.').'
+
+
+
+
+ '.
+ &mt('Grade all selected students in a grading table.').'
+
+
+
+
+
+
+
+
+
+
+ '.&mt('Grade Complete Folder for One Student').'
+
+
+
+
+
+ '.
+ &mt('The complete page/sequence/folder: For one student').'
+
+
+
+
+
+
+
+
+
+ ';
return $result;
}
@@ -6136,15 +7539,17 @@ sub gather_clicker_ids {
# Set up a couple variables.
my $username_idx = &Apache::loncoursedata::CL_SNAME();
my $domain_idx = &Apache::loncoursedata::CL_SDOM();
+ my $status_idx = &Apache::loncoursedata::CL_STATUS();
foreach my $student (keys(%$classlist)) {
-
+ if ($classlist->{$student}->[$status_idx] ne 'Active') { next; }
my $username = $classlist->{$student}->[$username_idx];
my $domain = $classlist->{$student}->[$domain_idx];
my $clickers =
(&Apache::lonnet::userenvironment($domain,$username,'clickers'))[1];
foreach my $id (split(/\,/,$clickers)) {
- $id=~s/^0+//;
+ $id=~s/^[\#0]+//;
+ $id=~s/[\-\:]//g;
if (exists($clicker_ids{$id})) {
$clicker_ids{$id}.=','.$username.':'.$domain;
} else {
@@ -6166,7 +7571,8 @@ sub gather_adv_clicker_ids {
my $clickers =
(&Apache::lonnet::userenvironment($pudom,$puname,'clickers'))[1];
foreach my $id (split(/\,/,$clickers)) {
- $id=~s/^0+//;
+ $id=~s/^[\#0]+//;
+ $id=~s/[\-\:]//g;
if (exists($clicker_ids{$id})) {
$clicker_ids{$id}.=','.$puname.':'.$pudom;
} else {
@@ -6178,6 +7584,14 @@ sub gather_adv_clicker_ids {
return %clicker_ids;
}
+sub clicker_grading_parameters {
+ return ('gradingmechanism' => 'scalar',
+ 'upfiletype' => 'scalar',
+ 'specificid' => 'scalar',
+ 'pcorrect' => 'scalar',
+ 'pincorrect' => 'scalar');
+}
+
sub process_clicker {
my ($r)=@_;
my ($symb)=&get_symb($r);
@@ -6191,16 +7605,33 @@ sub process_clicker {
$result.=' '.&mt('Specify a file containing the clicker information for this resource').
'.'."\n";
$result.='
'."\n";
+# Attempt to restore parameters from last session, set defaults if not present
+ my %Saveable_Parameters=&clicker_grading_parameters();
+ &Apache::loncommon::restore_course_settings('grades_clicker',
+ \%Saveable_Parameters);
+ if (!$env{'form.pcorrect'}) { $env{'form.pcorrect'}=100; }
+ if (!$env{'form.pincorrect'}) { $env{'form.pincorrect'}=100; }
+ if (!$env{'form.gradingmechanism'}) { $env{'form.gradingmechanism'}='attendance'; }
+ if (!$env{'form.upfiletype'}) { $env{'form.upfiletype'}='iclicker'; }
+
+ my %checked;
+ foreach my $gradingmechanism ('attendance','personnel','specific') {
+ if ($env{'form.gradingmechanism'} eq $gradingmechanism) {
+ $checked{$gradingmechanism}="checked='checked'";
+ }
+ }
+
my $upload=&mt("Upload File");
my $type=&mt("Type");
my $attendance=&mt("Award points just for participation");
my $personnel=&mt("Correctness determined from response by course personnel");
- my $specific=&mt("Correctness determined from response with clicker ID");
+ my $specific=&mt("Correctness determined from response with clicker ID(s)");
my $pcorrect=&mt("Percentage points for correct solution");
my $pincorrect=&mt("Percentage points for incorrect solution");
- my $selectform=&Apache::loncommon::select_form('iclicker','upfiletype',
- ('iclicker' => 'i>clicker'));
-
+ my $selectform=&Apache::loncommon::select_form($env{'form.upfiletype'},'upfiletype',
+ ('iclicker' => 'i>clicker',
+ 'interwrite' => 'interwrite PRS'));
+ $symb = &Apache::lonenc::check_encrypt($symb);
$result.=<
function sanitycheck() {
@@ -6248,13 +7679,13 @@ function sanitycheck() {
$type: $selectform
- $attendance:
- $personnel:
- $specific:
-
-
- $pcorrect:
- $pincorrect:
+ $attendance
+ $personnel
+ $specific
+
+
+ $pcorrect:
+ $pincorrect:
ENDUPFORM
@@ -6268,6 +7699,11 @@ sub process_clicker_file {
my ($r)=@_;
my ($symb)=&get_symb($r);
if (!$symb) {return '';}
+
+ my %Saveable_Parameters=&clicker_grading_parameters();
+ &Apache::loncommon::store_course_settings('grades_clicker',
+ \%Saveable_Parameters);
+
my ($result) = &showResourceInfo($symb,$env{'form.probTitle'});
if (($env{'form.gradingmechanism'} eq 'specific') && ($env{'form.specificid'}!~/\w/)) {
$result.=''.&mt('You need to specify a clicker ID for the correct answer').'';
@@ -6279,28 +7715,32 @@ sub process_clicker_file {
%correct_ids=&gather_adv_clicker_ids();
}
if ($env{'form.gradingmechanism'} eq 'specific') {
- my $correct_id=$env{'form.specificid'};
- $correct_id=~tr/a-z/A-Z/;
- $correct_id=~s/\s//gs;
- $correct_id=~s/^0+//;
- $correct_ids{$correct_id}='specified';
+ foreach my $correct_id (split(/[\s\,]/,$env{'form.specificid'})) {;
+ $correct_id=~tr/a-z/A-Z/;
+ $correct_id=~s/\s//gs;
+ $correct_id=~s/^[\#0]+//;
+ $correct_id=~s/[\-\:]//g;
+ if ($correct_id) {
+ $correct_ids{$correct_id}='specified';
+ }
+ }
}
if ($env{'form.gradingmechanism'} eq 'attendance') {
$result.=&mt('Score based on attendance only');
} else {
my $number=0;
- $result.='
'.&mt('Correctness determined by the following IDs').'
';
+ $result.='
'.&mt('Correctness determined by the following IDs').'';
foreach my $id (sort(keys(%correct_ids))) {
- $result.=''.$id.' - ';
+ $result.=' '.$id.' - ';
if ($correct_ids{$id} eq 'specified') {
$result.=&mt('specified');
} else {
my ($uname,$udom)=split(/\:/,$correct_ids{$id});
$result.=&Apache::loncommon::plainname($uname,$udom);
}
- $result.=' ';
$number++;
}
+ $result.="
\n";
if ($number==0) {
$result.=''.&mt('No IDs found to determine correct answer').'';
return $result.&show_grading_menu_form($symb);
@@ -6313,6 +7753,25 @@ sub process_clicker_file {
''.&HTML::Entities::encode($env{'form.upfile.filename'},'<>&"').'');
return $result.&show_grading_menu_form($symb);
}
+
+# Were able to get all the info needed, now analyze the file
+
+ $result.=&Apache::loncommon::studentbrowser_javascript();
+ $symb = &Apache::lonenc::check_encrypt($symb);
+ my $heading=&mt('Scanning clicker file');
+ $result.=(<
+
+$heading
+
+
+
+
+
+
+
+
+ENDHEADER
my %responses;
my @questiontitles;
my $errormsg='';
@@ -6320,10 +7779,76 @@ sub process_clicker_file {
if ($env{'form.upfiletype'} eq 'iclicker') {
($errormsg,$number)=&iclicker_eval(\@questiontitles,\%responses);
}
- $result.=' '.&mt('Found [_1] questions',$number).' ';
+ if ($env{'form.upfiletype'} eq 'interwrite') {
+ ($errormsg,$number)=&interwrite_eval(\@questiontitles,\%responses);
+ }
+ $result.=' '.&mt('Found [_1] question(s)',$number).' '.
+ ''.
+ &mt('Awarding [_1] percent for corrion(s)',$number).' '.
+ ''.
+ &mt('Awarding [_1] percent for correct and [_2] percent for incorrect responses',
+ $env{'form.pcorrect'},$env{'form.pincorrect'}).
+ ' ';
+# Remember Question Titles
+# FIXME: Possibly need delimiter other than ":"
+ for (my $i=0;$i<$number;$i++) {
+ $result.='').'" />';
+ }
+ my $correct_count=0;
+ my $student_count=0;
+ my $unknown_count=0;
+# Match answers with usernames
+# FIXME: Possibly need delimiter other than ":"
foreach my $id (keys(%responses)) {
- $result.=' '.$id.' - '.$responses{$id};
+ if ($correct_ids{$id}) {
+ $result.="\n".'';
+ $correct_count++;
+ } elsif ($clicker_ids{$id}) {
+ if ($clicker_ids{$id}=~/\,/) {
+# More than one user with the same clicker!
+ $result.="\n".&mt('Clicker registered more than once').": ".$id." ";
+ $result.="\n".''.
+ "";
+ foreach my $reguser (sort(split(/\,/,$clicker_ids{$id}))) {
+ $result.="';
+ }
+ $result.='';
+ $unknown_count++;
+ } else {
+# Good: found one and only one user with the right clicker
+ $result.="\n".'';
+ $student_count++;
+ }
+ } else {
+ $result.="\n".&mt('Unregistered Clicker')." ".$id." ";
+ $result.="\n".''.
+ "\n".&mt("Username").": ".
+ "\n".&mt("Domain").": ".
+ &Apache::loncommon::select_dom_form($env{'course.'.$env{'request.course.id'}.'.domain'},'udom'.$id).' '.
+ &Apache::loncommon::selectstudent_link('clickeranalysis','uname'.$id,'udom'.$id);
+ $unknown_count++;
+ }
+ }
+ $result.=''.
+ &mt('Found [_1] registered and [_2] unregistered clickers.',$student_count,$unknown_count);
+ if ($env{'form.gradingmechanism'} ne 'attendance') {
+ if ($correct_count==0) {
+ $errormsg.="Found no correct answers answers for grading!";
+ } elsif ($correct_count>1) {
+ $result.=' '.&mt("Found [_1] entries for grading!",$correct_count).'';
+ }
+ }
+ if ($number<1) {
+ $errormsg.="Found no questions.";
}
+ if ($errormsg) {
+ $result.=' '.&mt($errormsg).'';
+ } else {
+ $result.=' ';
+ }
+ $result.='
'."\n".
+ '
'."\n";
return $result.&show_grading_menu_form($symb);
}
@@ -6332,14 +7857,8 @@ sub iclicker_eval {
my $number=0;
my $errormsg='';
foreach my $line (split(/[\n\r]/,$env{'form.upfile'})) {
- chomp($line);
- foreach my $quoted ($line=~/\,\s*\"([^\"]*)\"\s*\,/g) {
- my $replace=$quoted;
- $replace=~s/\,//g;
- &Apache::lonnet::logthis($quoted.' - '.$replace.' ');
- $line=~s/\,\s*\"\Q$quoted\E\"\s*\,/,$replace,/gs;
- }
- my @entries=split(/\,/,$line);
+ my %components=&Apache::loncommon::record_sep($line);
+ my @entries=map {$components{$_}} (sort(keys(%components)));
if ($entries[0] eq 'Question') {
for (my $i=3;$i<$#entries;$i+=6) {
$$questiontitles[$number]=$entries[$i];
@@ -6360,10 +7879,144 @@ sub iclicker_eval {
return ($errormsg,$number);
}
+sub interwrite_eval {
+ my ($questiontitles,$responses)=@_;
+ my $number=0;
+ my $errormsg='';
+ my $skipline=1;
+ my $questionnumber=0;
+ my %idresponses=();
+ foreach my $line (split(/[\n\r]/,$env{'form.upfile'})) {
+ my %components=&Apache::loncommon::record_sep($line);
+ my @entries=map {$components{$_}} (sort(keys(%components)));
+ if ($entries[1] eq 'Time') { $skipline=0; next; }
+ if ($entries[1] eq 'Response') { $skipline=1; }
+ next if $skipline;
+ if ($entries[0]!=$questionnumber) {
+ $questionnumber=$entries[0];
+ $$questiontitles[$number]=&mt('Question [_1]',$questionnumber);
+ $number++;
+ }
+ my $id=$entries[4];
+ $id=~s/^[\#0]+//;
+ $id=~s/^v\d*\://i;
+ $id=~s/[\-\:]//g;
+ $idresponses{$id}[$number]=$entries[6];
+ }
+ foreach my $id (keys %idresponses) {
+ $$responses{$id}=join(',',@{$idresponses{$id}});
+ $$responses{$id}=~s/^\s*\,//;
+ }
+ return ($errormsg,$number);
+}
+
+sub assign_clicker_grades {
+ my ($r)=@_;
+ my ($symb)=&get_symb($r);
+ if (!$symb) {return '';}
+# See which part we are saving to
+ my ($partlist,$handgrade,$responseType) = &response_type($symb);
+# FIXME: This should probably look for the first handgradeable part
+ my $part=$$partlist[0];
+# Start screen output
+ my ($result) = &showResourceInfo($symb,$env{'form.probTitle'});
+
+ my $heading=&mt('Assigning grades based on clicker file');
+ $result.=(<
+
+$heading
+ENDHEADER
+# Get correct result
+# FIXME: Possibly need delimiter other than ":"
+ my @correct=();
+ my $gradingmechanism=$env{'form.gradingmechanism'};
+ my $number=$env{'form.number'};
+ if ($gradingmechanism ne 'attendance') {
+ foreach my $key (keys(%env)) {
+ if ($key=~/^form\.correct\:/) {
+ my @input=split(/\,/,$env{$key});
+ for (my $i=0;$i<=$#input;$i++) {
+ if (($correct[$i]) && ($input[$i]) &&
+ ($correct[$i] ne $input[$i])) {
+ $result.=' '.
+ &mt('More than one correct result given for question "[_1]": [_2] versus [_3].',
+ $env{'form.question:'.$i},$correct[$i],$input[$i]).'';
+ } elsif ($input[$i]) {
+ $correct[$i]=$input[$i];
+ }
+ }
+ }
+ }
+ for (my $i=0;$i<$number;$i++) {
+ if (!$correct[$i]) {
+ $result.=' '.
+ &mt('No correct result given for question "[_1]"!',
+ $env{'form.question:'.$i}).'';
+ }
+ }
+ $result.=' '.&mt("Correct answer: [_1]",join(', ',map { ($_?$_:'-') } @correct));
+ }
+# Start grading
+ my $pcorrect=$env{'form.pcorrect'};
+ my $pincorrect=$env{'form.pincorrect'};
+ my $storecount=0;
+ foreach my $key (keys(%env)) {
+ my $user='';
+ if ($key=~/^form\.student\:(.*)$/) {
+ $user=$1;
+ }
+ if ($key=~/^form\.unknown\:(.*)$/) {
+ my $id=$1;
+ if (($env{'form.uname'.$id}) && ($env{'form.udom'.$id})) {
+ $user=$env{'form.uname'.$id}.':'.$env{'form.udom'.$id};
+ } elsif ($env{'form.multi'.$id}) {
+ $user=$env{'form.multi'.$id};
+ }
+ }
+ if ($user) {
+ my @answer=split(/\,/,$env{$key});
+ my $sum=0;
+ for (my $i=0;$i<$number;$i++) {
+ if ($answer[$i]) {
+ if ($gradingmechanism eq 'attendance') {
+ $sum+=$pcorrect;
+ } else {
+ if ($answer[$i] eq $correct[$i]) {
+ $sum+=$pcorrect;
+ } else {
+ $sum+=$pincorrect;
+ }
+ }
+ }
+ }
+ my $ave=$sum/(100*$number);
+# Store
+ my ($username,$domain)=split(/\:/,$user);
+ my %grades=();
+ $grades{"resource.$part.solved"}='correct_by_override';
+ $grades{"resource.$part.awarded"}=$ave;
+ $grades{"resource.regrader"}="$env{'user.name'}:$env{'user.domain'}";
+ my $returncode=&Apache::lonnet::cstore(\%grades,$symb,
+ $env{'request.course.id'},
+ $domain,$username);
+ if ($returncode ne 'ok') {
+ $result.=" Failed to save student $username:$domain. Message when trying to save was ($returncode)";
+ } else {
+ $storecount++;
+ }
+ }
+ }
+# We are done
+ $result.=' '.&mt('Successfully stored grades for [_1] student(s).',$storecount).
+ '