--- loncom/homework/grades.pm 2007/11/06 10:12:27 1.481
+++ loncom/homework/grades.pm 2009/06/17 18:41:31 1.528.2.14
@@ -1,7 +1,7 @@
# The LearningOnline Network with CAPA
# The LON-CAPA Grading handler
#
-# $Id: grades.pm,v 1.481 2007/11/06 10:12:27 foxr Exp $
+# $Id: grades.pm,v 1.528.2.14 2009/06/17 18:41:31 raeburn Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -47,88 +47,89 @@ use LONCAPA;
use POSIX qw(floor);
-my %perm=();
-my %bubble_lines_per_response = (); # no. bubble lines for each response.
- # index is "symb.part_id"
-
-my %first_bubble_line = (); # First bubble line no. for each bubble.
-
-# Save and restore the bubble lines array to the form env.
-
-
-sub save_bubble_lines {
- foreach my $line (keys(%bubble_lines_per_response)) {
- $env{"form.scantron.bubblelines.$line"} = $bubble_lines_per_response{$line};
- $env{"form.scantron.first_bubble_line.$line"} =
- $first_bubble_line{$line};
- }
-}
+my %perm=();
-sub restore_bubble_lines {
- my $line = 0;
- %bubble_lines_per_response = ();
- while ($env{"form.scantron.bubblelines.$line"}) {
- my $value = $env{"form.scantron.bubblelines.$line"};
- $bubble_lines_per_response{$line} = $value;
- $first_bubble_line{$line} =
- $env{"form.scantron.first_bubble_line.$line"};
- $line++;
- }
-
-}
+# These variables are used to recover from ssi errors
-# Given the parsed scanline, get the response for
-# 'answer' number n:
+my $ssi_retries = 5;
+my $ssi_error;
+my $ssi_error_resource;
+my $ssi_error_message;
-sub get_response_bubbles {
- my ($parsed_line, $response) = @_;
+# Do an ssi with retries:
+# While I'd love to factor out this with the vesrion in lonprintout,
+# that would either require a data coupling between modules, which I refuse to perpetuate
+# (there's quite enough of that already), or would require the invention of another infrastructure
+# I'm not quite ready to invent (e.g. an ssi_with_retry object).
+#
+# At least the logic that drives this has been pulled out into loncommon.
- my $bubble_line = $first_bubble_line{$response-1} +1;
- my $bubble_lines= $bubble_lines_per_response{$response-1};
-
- my $selected = "";
- for (my $bline = 0; $bline < $bubble_lines; $bline++) {
- $selected .= $$parsed_line{"scantron.$bubble_line.answer"}.":";
- $bubble_line++;
+#
+# ssi_with_retries - Does the server side include of a resource.
+# if the ssi call returns an error we'll retry it up to
+# the number of times requested by the caller.
+# If we still have a proble, no text is appended to the
+# output and we set some global variables.
+# to indicate to the caller an SSI error occurred.
+# All of this is supposed to deal with the issues described
+# in LonCAPA BZ 5631 see:
+# http://bugs.lon-capa.org/show_bug.cgi?id=5631
+# by informing the user that this happened.
+#
+# Parameters:
+# resource - The resource to include. This is passed directly, without
+# interpretation to lonnet::ssi.
+# form - The form hash parameters that guide the interpretation of the resource
+#
+# retries - Number of retries allowed before giving up completely.
+# Returns:
+# On success, returns the rendered resource identified by the resource parameter.
+# Side Effects:
+# The following global variables can be set:
+# ssi_error - If an unrecoverable error occurred this becomes true.
+# It is up to the caller to initialize this to false
+# if desired.
+# ssi_error_resource - If an unrecoverable error occurred, this is the value
+# of the resource that could not be rendered by the ssi
+# call.
+# ssi_error_message - The error string fetched from the ssi response
+# in the event of an error.
+#
+sub ssi_with_retries {
+ my ($resource, $retries, %form) = @_;
+ my ($content, $response) = &Apache::loncommon::ssi_with_retries($resource, $retries, %form);
+ if ($response->is_error) {
+ $ssi_error = 1;
+ $ssi_error_resource = $resource;
+ $ssi_error_message = $response->code . " " . $response->message;
}
- return $selected;
-}
-
-# ----- These first few routines are general use routines.----
-
-# Return the number of occurences of a pattern in a string.
+ return $content;
-sub occurence_count {
- my ($string, $pattern) = @_;
-
- my @matches = ($string =~ /$pattern/g);
-
- return scalar(@matches);
}
+#
+# Prodcuces an ssi retry failure error message to the user:
+#
-
-# Take a string known to have digits and convert all the
-# digits into letters in the range J,A..I.
-
-sub digits_to_letters {
- my ($input) = @_;
-
- my @alphabet = ('J', 'A'..'I');
-
- my @input = split(//, $input);
- my $output ='';
- for (my $i = 0; $i < scalar(@input); $i++) {
- if ($input[$i] =~ /\d/) {
- $output .= $alphabet[$input[$i]];
- } else {
- $output .= $input[$i];
- }
- }
- return $output;
+sub ssi_print_error {
+ my ($r) = @_;
+ my $helpurl = &Apache::loncommon::top_nav_help('Helpdesk');
+ $r->print('
+
+
+'.&mt('Unable to retrieve a resource from a server:').'
+'.&mt('Resource:').' '.$ssi_error_resource.'
+'.&mt('Error:').' '.$ssi_error_message.'
+
+
'.
+&mt('It is recommended that you try again later, as this error may mean the server was just temporarily unavailable, or is down for maintenance.').' '.
+&mt('If the error persists, please contact the [_1] for assistance.',$helpurl).
+'
');
+ return;
}
#
@@ -171,7 +172,7 @@ sub get_symb {
sub nameUserString {
my ($type,$fullname,$uname,$udom) = @_;
if ($type eq 'header') {
- return ' Fullname (Username)';
+ return ' '.&mt('Fullname').' ('.&mt('Username').')';
} else {
return ' '.$fullname.' ('.$uname.
($env{'user.domain'} eq $udom ? '' : ' ('.$udom.')').')';
@@ -239,8 +240,8 @@ sub showResourceInfo {
my %resptype = ();
my $hdgrade='no';
my %partsseen;
- foreach my $partID (sort keys(%$responseType)) {
- foreach my $resID (sort keys(%{ $responseType->{$partID} })) {
+ foreach my $partID (sort(keys(%$responseType))) {
+ foreach my $resID (sort(keys(%{ $responseType->{$partID} }))) {
my $handgrade=$$handgrade{$partID.'_'.$resID};
my $responsetype = $responseType->{$partID}->{$resID};
$hdgrade = $handgrade if ($handgrade eq 'yes');
@@ -254,10 +255,10 @@ sub showResourceInfo {
$partsseen{$partID}=1;
}
my $display_part=&get_display_part($partID,$symb);
- $result.='
Part: '.$display_part.' '.
- $resID.'
'.
- '
Type: '.$responsetype.'
';
-# '
Handgrade: '.$handgrade.'
';
+ $result.='
'.&mt('Part').': '.$display_part.
+ ' '.$resID.'
'.
+ '
'.&mt('Type').': '.$responsetype.'
';
+# '
'.&mt('Handgrade: [_1]',$handgrade).'
';
}
}
$result.=''."\n";
@@ -277,38 +278,42 @@ sub reset_caches {
}
sub get_analyze {
- my ($symb,$uname,$udom)=@_;
+ my ($symb,$uname,$udom,$no_increment)=@_;
my $key = "$symb\0$uname\0$udom";
return $analyze_cache{$key} if (exists($analyze_cache{$key}));
my (undef,undef,$url)=&Apache::lonnet::decode_symb($symb);
$url=&Apache::lonnet::clutter($url);
- my $subresult=&Apache::lonnet::ssi($url,
- ('grade_target' => 'analyze'),
- ('grade_domain' => $udom),
- ('grade_symb' => $symb),
- ('grade_courseid' =>
- $env{'request.course.id'}),
- ('grade_username' => $uname));
+ my $subresult=&ssi_with_retries($url, $ssi_retries,
+ ('grade_target' => 'analyze',
+ 'grade_domain' => $udom,
+ 'grade_symb' => $symb,
+ 'grade_courseid' =>
+ $env{'request.course.id'},
+ 'grade_username' => $uname,
+ 'grade_noincrement' => $no_increment));
(undef,$subresult)=split(/_HASH_REF__/,$subresult,2);
my %analyze=&Apache::lonnet::str2hash($subresult);
return $analyze_cache{$key} = \%analyze;
}
sub get_order {
- my ($partid,$respid,$symb,$uname,$udom)=@_;
- my $analyze = &get_analyze($symb,$uname,$udom);
+ my ($partid,$respid,$symb,$uname,$udom,$no_increment)=@_;
+ my $analyze = &get_analyze($symb,$uname,$udom,$no_increment);
return $analyze->{"$partid.$respid.shown"};
}
sub get_radiobutton_correct_foil {
my ($partid,$respid,$symb,$uname,$udom)=@_;
my $analyze = &get_analyze($symb,$uname,$udom);
- foreach my $foil (@{&get_order($partid,$respid,$symb,$uname,$udom)}) {
- if ($analyze->{"$partid.$respid.foil.value.$foil"} eq 'true') {
- return $foil;
- }
- }
+ my $foils = &get_order($partid,$respid,$symb,$uname,$udom);
+ if (ref($foils) eq 'ARRAY') {
+ foreach my $foil (@{$foils}) {
+ if ($analyze->{"$partid.$respid.foil.value.$foil"} eq 'true') {
+ return $foil;
+ }
+ }
+ }
}
}
@@ -733,9 +738,12 @@ sub verifyreceipt {
$receipt =~ s/[^\-\d]//g;
my ($symb) = &get_symb($request);
- my $title.='
'.
@@ -763,28 +786,23 @@ sub verifyreceipt {
if ($receiptparts) {
$contents.='
'.$part.'
';
}
- $contents.='
'."\n";
+ $contents.=
+ &Apache::loncommon::end_data_table_row()."\n";
$matches++;
}
}
}
if ($matches == 0) {
- $string = $title.'No match found for the above receipt.';
+ $string = $title.&mt('No match found for the above receipt.');
} else {
$string = &jscriptNform($symb).$title.
- 'The above receipt matches the following student'.
- ($matches <= 1 ? '.' : 's.')."\n".
- '
'."\n".
- '
'."\n".
- '
Fullname
'."\n".
- '
Username
'."\n".
- '
Domain
';
- if ($receiptparts) {
- $string.='
Problem Part
';
- }
- $string.='
'."\n".$contents.
- '
'."\n";
+ '
'.
+ &mt('The above receipt matches the following [numerate,_1,student].',$matches).
+ '
'.$viewgrade.
- ' Submissions for a Student or a Group of Students
';
+ my $result='
'.
+ &mt("$viewgrade Submissions for a Student or a Group of Students")
+ .'
';
my ($table,undef,$hdgrade,$partlist,$handgrade) = &showResourceInfo($symb,$env{'form.probTitle'},($env{'form.showgrading'} eq 'yes'));
+ my %lt = &Apache::lonlocal::texthash (
+ 'multiple' => 'Please select a student or group of students before clicking on the Next button.',
+ 'single' => 'Please select the student before clicking on the Next button.',
+ );
$request->print(<
function checkSelect(checkBox) {
@@ -822,15 +845,15 @@ sub listStudents {
ctr++;
}
}
- sense = "a student or group of students";
+ sense = '$lt{'multiple'}';
} else {
if (checkBox.checked) {
ctr = 1;
}
- sense = "the student";
+ sense = '$lt{'single'}';
}
if (ctr == 0) {
- alert("Please select "+sense+" before clicking on the Next button.");
+ alert(sense);
return false;
}
document.gradesub.submit();
@@ -850,30 +873,45 @@ LISTJAVASCRIPT
my $checkhdgrade = ($env{'form.handgrade'} eq 'yes' && scalar(@$partlist) > 1 ) ? 'checked="checked"' : '';
my $checklastsub = $checkhdgrade eq '' ? 'checked="checked"' : '';
my $gradeTable=''."\n";
+ 'value="'.&mt('Next').' →" />'."\n";
if ($ctr == 0) {
my $num_students=(scalar(keys(%$fullname)));
if ($num_students eq 0) {
- $gradeTable=' There are no students currently enrolled.';
+ $gradeTable=' '.&mt('There are no students currently enrolled.').'';
} else {
my $submissions='submissions';
if ($submitonly eq 'incorrect') { $submissions = 'incorrect submissions'; }
if ($submitonly eq 'graded' ) { $submissions = 'ungraded submissions'; }
if ($submitonly eq 'queued' ) { $submissions = 'queued submissions'; }
$gradeTable=' '.
- 'No '.$submissions.' found for this resource for any students. ('.$num_students.
- ' students checked for '.$submissions.') ';
+ &mt('No '.$submissions.' found for this resource for any students. ([_1] students checked for '.$submissions.')',
+ $num_students).
+ ' ';
}
} elsif ($ctr == 1) {
$gradeTable =~ s/type="checkbox"/type="checkbox" checked="checked"/;
@@ -1079,9 +1118,9 @@ sub check_script {
}
sub check_buttons {
- my $buttons.='';
- $buttons.=' ';
- $buttons.='';
+ my $buttons.='';
+ $buttons.=' ';
+ $buttons.='';
$buttons.=' ';
return $buttons;
}
@@ -1112,6 +1151,7 @@ sub processGroup {
#--- Javascript to handle the submission page functionality ---
sub sub_page_js {
my $request = shift;
+ my $alertmsg = &mt('A number equal or greater than 0 is expected. Entered value = ');
$request->print(<
function updateRadio(formname,id,weight) {
@@ -1122,7 +1162,7 @@ sub sub_page_js {
gradeBox.value = pts;
var resetbox = false;
if (isNaN(pts) || pts < 0) {
- alert("A number equal or greater than 0 is expected. Entered value = "+pts);
+ alert("$alertmsg"+pts);
for (var i=0; iprint(<
@@ -1399,7 +1440,7 @@ INNERJS
else return;
var cleantxt = txt.replace(new RegExp('([\\f\\n\\r\\t\\v ])+', 'g')," ");
if (cleantxt=="") {
- alert("Please select a word or group of words from document and then click this link.");
+ alert("$alertmsg");
return;
}
var nret = prompt("Add selection to keyword list? Edit if desired.",cleantxt);
@@ -1616,8 +1657,7 @@ sub get_increment {
sub gradeBox {
my ($request,$symb,$uname,$udom,$counter,$partid,$record) = @_;
my $checkIcon = '';
+ '" src="'.&Apache::loncommon::lonhttpdurl($request->dir_config('lonIconsURL').'/check.gif').'" height="16" border="0" />';
my $wgt = &Apache::lonnet::EXT('resource.'.$partid.'.weight',$symb,$udom,$uname);
my $wgtmsg = ($wgt > 0) ? &mt('(problem weight)')
: ''.&mt('problem weight assigned by computer').'';
@@ -1632,41 +1672,46 @@ sub gradeBox {
if ($last_resets{$partid}) {
$aggtries = &get_num_tries($record,$last_resets{$partid},$partid);
}
- $result.='
'.
- 'Part: '.$display_part.' Points:
'."\n";
+ $result.='
';
my $ctr = 0;
my $thisweight = 0;
my $increment = &get_increment();
- $result.='
'."\n"; # display radio buttons in a nice table 10 across
+
+ my $radio.='
'."\n"; # display radio buttons in a nice table 10 across
while ($thisweight<=$wgt) {
- $result.= '
'."\n";
$result.=&handback_box($symb,$uname,$udom,$counter,$partid,$record);
return $result;
}
@@ -1707,7 +1751,7 @@ sub handback_box {
''.$file_disp.'');
$result.=''."\n";
$result.=' ';
- $result.='(File will be uploaded when you click on Save & Next below.) ';
+ $result.='('.&mt('File will be uploaded when you click on Save & Next below.').') ';
$file_counter++;
}
}
@@ -1796,9 +1840,9 @@ sub download_all_link {
join("\n",&Apache::loncommon::get_env_multiple('form.vPart'));
my $identifier = &Apache::loncommon::get_cgi_id();
- &Apache::lonnet::appenv('cgi.'.$identifier.'.students' => $all_students,
- 'cgi.'.$identifier.'.symb' => $symb,
- 'cgi.'.$identifier.'.parts' => $parts,);
+ &Apache::lonnet::appenv({'cgi.'.$identifier.'.students' => $all_students,
+ 'cgi.'.$identifier.'.symb' => $symb,
+ 'cgi.'.$identifier.'.parts' => $parts,});
$r->print(''.
&mt('Download All Submitted Documents').'');
return
@@ -1853,8 +1897,8 @@ sub submission {
if ($env{'form.handgrade'} eq 'yes' && &files_exist($request, $symb)) {
&download_all_link($request, $symb);
}
- $request->print('
Submission Record
'."\n".
- '
Resource: '.$env{'form.probTitle'}.'
'."\n");
+ $request->print('
'.&mt('Submission Record').'
'."\n".
+ '
'.&mt('Resource: [_1]',$env{'form.probTitle'}).'
'."\n");
# option to display problem, only once else it cause problems
# with the form later since the problem has a form.
@@ -2047,7 +2091,7 @@ KEYWORDS
$lastsubonly.="\n".'
Part: '.
$display_part.' ( ID '.$respid.
' ) '.
- ''.&mt('Nothing submitted - no attempts').'
';
+ ''.&mt('Nothing submitted - no attempts.').'
';
next;
}
foreach my $submission (@$string) {
@@ -2088,7 +2132,7 @@ KEYWORDS
' ) ';
my $files=&get_submitted_files($udom,$uname,$partid,$respid,\%record);
if (@$files) {
- $lastsubonly.=' '.&mt('Like all files provided by users, this file may contain virusses').' ';
+ $lastsubonly.=' '.&mt('Like all files provided by users, this file may contain viruses').' ';
my $file_counter = 0;
foreach my $file (@$files) {
$file_counter++;
@@ -2099,7 +2143,7 @@ KEYWORDS
}
$lastsubonly.=''.&mt('Submitted Answer:').' '.
&cleanRecord($subval,$responsetype,$symb,$partid,
- $respid,\%record,$order);
+ $respid,\%record,$order,undef,$uname,$udom);
if ($similar) {$lastsubonly.="
$similar\n";}
$lastsubonly.='';
}
@@ -2179,8 +2223,8 @@ KEYWORDS
$seen{$partid}++;
next if ($$handgrade{$part_resp} ne 'yes'
&& $env{'form.lastSub'} eq 'hdgrade');
- push @partlist,$partid;
- push @gradePartRespid,$partid.'.'.$respid;
+ push(@partlist,$partid);
+ push(@gradePartRespid,$partid.'.'.$respid);
$request->print(&gradeBox($request,$symb,$uname,$udom,$counter,$partid,\%record));
}
$request->print('');
@@ -2219,7 +2263,7 @@ KEYWORDS
# print end of form
if ($counter == $total) {
my $endform='
'."\n";
- $endform.=' '."\n";
my $ntstu =''.
@@ -2228,15 +2272,15 @@ KEYWORDS
''."\n";
my $nsel = ($env{'form.NTSTU'} ne '' ? $env{'form.NTSTU'} : '1');
$ntstu =~ s/
';
+ $endform.='';
$endform.=&show_grading_menu_form($symb);
$request->print($endform);
}
@@ -2311,7 +2355,7 @@ sub get_last_submission {
$$returnhash{$version.':keys'}))) {
$lasthash{$key}=$$returnhash{$version.':'.$key};
$timestamp =
- scalar(localtime($$returnhash{$version.':timestamp'}));
+ &Apache::lonlocal::locallocaltime($$returnhash{$version.':timestamp'});
}
}
foreach my $key (keys(%lasthash)) {
@@ -2507,7 +2551,7 @@ sub processHandGrade {
my (@parsedlist,@nextlist);
my ($nextflg) = 0;
- foreach (sort
+ foreach my $item (sort
{
if (lc($$fullname{$a}) ne lc($$fullname{$b})) {
return (lc($$fullname{$a}) cmp lc($$fullname{$b}));
@@ -2515,12 +2559,12 @@ sub processHandGrade {
return $a cmp $b;
} (keys(%$fullname))) {
if ($nextflg == 1 && $button =~ /Next$/) {
- push @parsedlist,$_;
+ push(@parsedlist,$item);
}
- $nextflg = 1 if ($_ eq $laststu);
+ $nextflg = 1 if ($item eq $laststu);
if ($button eq 'Previous') {
- last if ($_ eq $firststu);
- push @parsedlist,$_;
+ last if ($item eq $firststu);
+ push(@parsedlist,$item);
}
}
$ctr = 0;
@@ -2543,11 +2587,11 @@ sub processHandGrade {
my $submitted = 0;
my $ungraded = 0;
my $incorrect = 0;
- foreach (keys(%status)) {
- $submitted = 1 if ($status{$_} ne 'nothing');
- $ungraded = 1 if ($status{$_} =~ /^ungraded/);
- $incorrect = 1 if ($status{$_} =~ /^incorrect/);
- my ($foo,$partid,$foo1) = split(/\./,$_);
+ foreach my $item (keys(%status)) {
+ $submitted = 1 if ($status{$item} ne 'nothing');
+ $ungraded = 1 if ($status{$item} =~ /^ungraded/);
+ $incorrect = 1 if ($status{$item} =~ /^incorrect/);
+ my ($foo,$partid,$foo1) = split(/\./,$item);
if ($status{'resource.'.$partid.'.submitted_by'} ne '') {
$submitted = 0;
}
@@ -2558,7 +2602,7 @@ sub processHandGrade {
next if (!$ungraded && ($submitonly eq 'graded'));
next if (!$incorrect && $submitonly eq 'incorrect');
}
- push @nextlist,$student if ($ctr < $ntstu);
+ push(@nextlist,$student) if ($ctr < $ntstu);
last if ($ctr == $ntstu);
$ctr++;
}
@@ -2566,7 +2610,7 @@ sub processHandGrade {
$ctr = 0;
my $total = scalar(@nextlist)-1;
- foreach (sort @nextlist) {
+ foreach (sort(@nextlist)) {
my ($uname,$udom,$submitter) = split(/:/);
$env{'form.student'} = $uname;
$env{'form.userdom'} = $udom;
@@ -2575,9 +2619,9 @@ sub processHandGrade {
$ctr++;
}
if ($total < 0) {
- my $the_end = '
LON-CAPA User Message
'."\n";
- $the_end.='Message: No more students for this section or class.
'."\n";
- $the_end.='Click on the button below to return to the grading menu.
'."\n";
+ my $the_end = '
'.&mt('LON-CAPA User Message').'
'."\n";
+ $the_end.=&mt('Message: No more students for this section or class.').'
'."\n";
+ $the_end.=&mt('Click on the button below to return to the grading menu.').'
'."\n";
$the_end.=&show_grading_menu_form($symb);
$request->print($the_end);
}
@@ -2612,7 +2656,7 @@ sub saveHandGrade {
}
} elsif ($dropMenu eq 'reset status'
&& exists($record{'resource.'.$new_part.'.solved'})) { #don't bother if no old records -> no attempts
- foreach my $key (keys (%record)) {
+ foreach my $key (keys(%record)) {
if ($key=~/^resource\.\Q$new_part\E\./) { $newrecord{$key} = ''; }
}
$newrecord{'resource.'.$new_part.'.regrader'}=
@@ -2647,7 +2691,7 @@ sub saveHandGrade {
&handback_files($request,$symb,$stuname,$domain,$newflg,$new_part,\%newrecord);
next;
} else {
- push @parts_graded, $new_part;
+ push(@parts_graded,$new_part);
}
if ($record{'resource.'.$new_part.'.awarded'} ne $partial) {
$newrecord{'resource.'.$new_part.'.awarded'} = $partial;
@@ -2674,7 +2718,7 @@ sub saveHandGrade {
$record{'resource.'.$new_part.'.solved'} eq 'incorrect_by_override' ||
$dropMenu eq 'reset status')
{
- push (@version_parts,$new_part);
+ push(@version_parts,$new_part);
}
}
my $cdom = $env{'course.'.$env{'request.course.id'}.'.domain'};
@@ -2722,7 +2766,7 @@ sub check_and_remove_from_queue {
sub handback_files {
my ($request,$symb,$stuname,$domain,$newflg,$new_part,$newrecord) = @_;
- my $portfolio_root = &propath($domain,$stuname).'/userfiles/portfolio';
+ my $portfolio_root = '/userfiles/portfolio';
my ($partlist,$handgrade,$responseType) = &response_type($symb);
my @part_response_id = &flatten_responseType($responseType);
@@ -2740,7 +2784,8 @@ sub handback_files {
my ($answer_name,$answer_ver,$answer_ext) =
&file_name_version_ext($answer_file);
my ($portfolio_path) = ($directory =~ /^.+$stuname\/portfolio(.*)/);
- my @dir_list = &Apache::lonnet::dirlist($portfolio_path,$domain,$stuname,$portfolio_root);
+ my $getpropath = 1;
+ my @dir_list = &Apache::lonnet::dirlist($portfolio_root.$portfolio_path,$domain,$stuname,$getpropath);
my $version = &get_next_version($answer_name, $answer_ext, \@dir_list);
# fix file name
my ($save_file_name) = (($directory.$answer_name.".$version.".$answer_ext) =~ /^.+\/${stuname}\/(.*)/);
@@ -2748,8 +2793,10 @@ sub handback_files {
$newflg.'_'.$part_resp.'_returndoc'.$file_counter,
$save_file_name);
if ($result !~ m|^/uploaded/|) {
- $request->print('An error occurred ('.$result.
- ') while trying to upload '.$newflg.'_'.$part_resp.'_returndoc'.$file_counter.' ');
+ $request->print(' '.
+ &mt('An error occurred ([_1]) while trying to upload [_2].',
+ $result,$newflg.'_'.$part_resp.'_returndoc'.$file_counter).
+ '');
} else {
# mark the file as read only
my @files = ($save_file_name);
@@ -2846,7 +2893,7 @@ sub decrement_aggs {
if ($aggtries == $totaltries) {
$decrement{'users'} = 1;
}
- foreach my $type (keys (%decrement)) {
+ foreach my $type (keys(%decrement)) {
$$aggregate{$symb."\0".$part."\0".$type} = -$decrement{$type};
}
return;
@@ -2876,8 +2923,7 @@ sub version_portfiles {
my $version_parts = join('|',@$v_flag);
my @returned_keys;
my $parts = join('|', @$parts_graded);
- my $portfolio_root = &propath($domain,$stu_name).
- '/userfiles/portfolio';
+ my $portfolio_root = '/userfiles/portfolio';
foreach my $key (keys(%$record)) {
my $new_portfiles;
if ($key =~ /^resource\.($version_parts)\./ && $key =~ /\.portfiles$/ ) {
@@ -2888,7 +2934,8 @@ sub version_portfiles {
my ($directory,$answer_file) =($file =~ /^(.*?)([^\/]*)$/);
my ($answer_name,$answer_ver,$answer_ext) =
&file_name_version_ext($answer_file);
- my @dir_list = &Apache::lonnet::dirlist($directory,$domain,$stu_name,$portfolio_root);
+ my $getpropath = 1;
+ my @dir_list = &Apache::lonnet::dirlist($portfolio_root.$directory,$domain,$stu_name,$getpropath);
my $version = &get_next_version($answer_name, $answer_ext, \@dir_list);
my $new_answer = &version_selected_portfile($domain, $stu_name, $directory, $answer_file, $version);
if ($new_answer ne 'problem getting file') {
@@ -2968,6 +3015,7 @@ sub file_name_version_ext {
sub viewgrades_js {
my ($request) = shift;
+ my $alertmsg = &mt('A number equal or greater than 0 is expected. Entered value = ');
$request->print(<
function writePoint(partid,weight,point) {
@@ -2976,7 +3024,7 @@ sub viewgrades_js {
if (point == "textval") {
point = document.classgrade["TEXTVAL_"+partid].value;
if (isNaN(point) || parseFloat(point) < 0) {
- alert("A number equal or greater than 0 is expected. Entered value = "+parseFloat(point));
+ alert("$alertmsg"+parseFloat(point));
var resetbox = false;
for (var i=0; i'.&mt('Manual Grading').'';
- $result.='
'."\n";
#view individual student submission form - called using Javascript viewOneStudent
$result.=&jscriptNform($symb);
@@ -3163,17 +3211,19 @@ sub viewgrades {
''."\n".
''."\n";
- my $sectionClass;
- my $section_display = join (", ",&Apache::loncommon::get_env_multiple('form.section'));
+ my ($common_header,$specific_header);
if ($env{'form.section'} eq 'all') {
- $sectionClass='Class ';
+ $common_header = &mt('Assign Common Grade to Class');
+ $specific_header = &mt('Assign Grade to Specific Students in Class');
} elsif ($env{'form.section'} eq 'none') {
- $sectionClass=&mt('Students in no Section').'';
+ $common_header = &mt('Assign Common Grade to Students in no Section');
+ $specific_header = &mt('Assign Grade to Specific Students in no Section');
} else {
- $sectionClass=&mt('Students in Section(s) [_1]',$section_display).'';
+ my $section_display = join (", ",&Apache::loncommon::get_env_multiple('form.section'));
+ $common_header = &mt('Assign Common Grade to Students in Section(s) [_1]',$section_display);
+ $specific_header = &mt('Assign Grade to Specific Students in Section(s) [_1]',$section_display);
}
- $result.='
'.&mt('Assign Common Grade To [_1]',$sectionClass);
- $result.= &Apache::loncommon::start_data_table();
+ $result.= '
'.$common_header.'
'.&Apache::loncommon::start_data_table();
#radio buttons/text box for assigning points for a section or class.
#handles different parts of a problem
my ($partlist,$handgrade,$responseType) = &response_type($symb);
@@ -3190,67 +3240,78 @@ sub viewgrades {
my $wgt = &Apache::lonnet::EXT('resource.'.$partid.'.weight',$symb);
$weight{$partid} = $wgt eq '' ? '1' : $wgt;
- $result.=&Apache::loncommon::start_data_table_row().'
'.
+ &Apache::loncommon::end_data_table_row()."\n";
$ctsparts++;
}
$result.=&Apache::loncommon::end_data_table()."\n".
'';
- $result.='';
#table listing all the students in a section/class
#header of table
- $result.= '
Assign Grade to Specific Students in '.$sectionClass;
- $result.= &Apache::loncommon::start_data_table().
- &Apache::loncommon::start_data_table_header_row().
- '
\n";
my (@parts) = sort(&getpartlist($symb));
my (undef,undef,$url)=&Apache::lonnet::decode_symb($symb);
my @partids = ();
foreach my $part (@parts) {
my $display=&Apache::lonnet::metadata($url,$part.'.display');
- $display =~ s|^Number of Attempts|Tries |; # makes the column narrower
+ my $narrowtext = &mt('Tries').' ';
+ $display =~ s{^Number of Attempts}{$narrowtext}; # makes the column narrower
if (!$display) { $display = &Apache::lonnet::metadata($url,$part.'.name'); }
my ($partid) = &split_part_type($part);
- push(@partids, $partid);
+ push(@partids,$partid);
my $display_part=&get_display_part($partid,$symb);
if ($display =~ /^Partial Credit Factor/) {
- $result.='
'."\n";
}
$result.=&Apache::loncommon::end_data_table_header_row();
@@ -3275,14 +3336,14 @@ sub viewgrades {
}
$result.=&Apache::loncommon::end_data_table();
$result.=''."\n";
- $result.=''."\n";
if (scalar(%$fullname) eq 0) {
my $colspan=3+scalar(@parts);
my $section_display = join (", ",&Apache::loncommon::get_env_multiple('form.section'));
my $stu_status = join(' or ',&Apache::loncommon::get_env_multiple('form.Status'));
$result=''.
- &mt('There are no students in section(s) [_1] with enrollment status [_2] to modify or grade',
+ &mt('There are no students in section(s) [_1] with enrollment status [_2] to modify or grade.',
$section_display, $stu_status).
'';
}
@@ -3338,9 +3399,9 @@ sub viewstudentgrade {
$result.=' '."\n";
- $result.= (($status eq 'excused') ? ''
- : '')."\n";
- $result.='';
+ $result.= (($status eq 'excused') ? ''
+ : '')."\n";
+ $result.='';
$result.=" \n";
} else {
$result.=''.&mt('Old '.$display).''.
- '
';
$columns{$partid}+=2;
}
}
@@ -3747,11 +3809,12 @@ ENDPICK
}
sub checkforfile_js {
+ my $alertmsg = &mt('Please use the browse button to select a file from your local directory.');
my $result =<
function checkUpload(formname) {
if (formname.upfile.value == "") {
- alert("Please use the browse button to select a file from your local directory.");
+ alert("$alertmsg");
return false;
}
formname.submit();
@@ -3771,7 +3834,7 @@ sub upcsvScores_form {
$result.=$table;
$result.='
'."\n";
$result.='
'."\n";
- $result.=' '.&mt('Specify a file containing the class scores for current resource').
+ $result.=' '.&mt('Specify a file containing the class scores for current resource.').
'.
'."\n";
$result.='
'."\n";
my $upload=&mt("Upload Scores");
@@ -3984,31 +4047,31 @@ sub csvuploadassign {
$grades{$store_key}=$entries{$fields{$dest}};
}
}
- if (! %grades) { push(@skipped,"$username:$domain no data to save"); }
- $grades{"resource.regrader"}="$env{'user.name'}:$env{'user.domain'}";
- my $result=&Apache::lonnet::cstore(\%grades,$symb,
+ if (! %grades) {
+ push(@skipped,&mt("[_1]: no data to save","$username:$domain"));
+ } else {
+ $grades{"resource.regrader"}="$env{'user.name'}:$env{'user.domain'}";
+ my $result=&Apache::lonnet::cstore(\%grades,$symb,
$env{'request.course.id'},
$domain,$username);
- if ($result eq 'ok') {
- $request->print('.');
- } else {
- $request->print("
-
- Failed to save student $username:$domain.
- Message when trying to save was ($result)
-
-
';
+ $studentTable.=' '.&mt('Note: Problems graded correct by the computer are marked with a [_1] symbol.',$checkIcon)."\n".
+ &Apache::loncommon::start_data_table().
+ &Apache::loncommon::start_data_table_header_row().
+ '
'."\n";
$request->print($result);
@@ -4441,7 +4524,7 @@ sub updateGradeByPage {
my ($mapUrl, $id, $resUrl) = &Apache::lonnet::decode_symb( $env{'form.page'});
my $map = $navmap->getResourceByUrl($resUrl); # add to navmaps
if (!$map) {
- $request->print('Unable to grade requested sequence. ('.$resUrl.')');
+ $request->print(''.&mt('Unable to grade requested sequence ([_1]).',$resUrl).'');
my ($symb)=&get_symb($request);
$request->print(&show_grading_menu_form($symb));
return;
@@ -4449,12 +4532,14 @@ sub updateGradeByPage {
my $iterator = $navmap->getIterator($map->map_start(),
$map->map_finish());
- my $studentTable='
'.
- '
'.
- '
Prob.
'.
- '
Title
'.
- '
Previous Score
'.
- '
New Score
';
+ my $studentTable=
+ &Apache::loncommon::start_data_table().
+ &Apache::loncommon::start_data_table_header_row().
+ '
'.&mt('Prob.').'
'.
+ '
'.&mt('Title').'
'.
+ '
'.&mt('Previous Score').'
'.
+ '
'.&mt('New Score').'
'.
+ &Apache::loncommon::end_data_table_header_row();
$iterator->next(); # skip the first BEGIN_MAP
my $curRes = $iterator->next(); # for "current resource"
@@ -4467,8 +4552,12 @@ sub updateGradeByPage {
my $parts = $curRes->parts();
my $title = $curRes->compTitle();
my $symbx = $curRes->symb();
- $studentTable.='
';
+ $studentTable.=&Apache::loncommon::end_data_table();
$studentTable.=&show_grading_menu_form($env{'form.symb'});
- my $grademsg=($changeflag == 0 ? 'No score was changed or updated.' :
- 'The scores were changed for '.
- $changeflag.' problem'.($changeflag == 1 ? '.' : 's.'));
+ my $grademsg=($changeflag == 0 ? &mt('No score was changed or updated.') :
+ &mt('The scores were changed for [quant,_1,problem].',
+ $changeflag));
$request->print($grademsg.$studentTable);
return '';
@@ -4675,6 +4764,69 @@ sub getSequenceDropDown {
return $result;
}
+my %bubble_lines_per_response; # no. bubble lines for each response.
+ # index is "symb.part_id"
+
+my %first_bubble_line; # First bubble line no. for each bubble.
+
+my %subdivided_bubble_lines; # no. bubble lines for optionresponse,
+ # matchresponse or rankresponse, where
+ # an individual response can have multiple
+ # lines
+
+my %responsetype_per_response; # responsetype for each response
+
+# Save and restore the bubble lines array to the form env.
+
+
+sub save_bubble_lines {
+ foreach my $line (keys(%bubble_lines_per_response)) {
+ $env{"form.scantron.bubblelines.$line"} = $bubble_lines_per_response{$line};
+ $env{"form.scantron.first_bubble_line.$line"} =
+ $first_bubble_line{$line};
+ $env{"form.scantron.sub_bubblelines.$line"} =
+ $subdivided_bubble_lines{$line};
+ $env{"form.scantron.responsetype.$line"} =
+ $responsetype_per_response{$line};
+ }
+}
+
+
+sub restore_bubble_lines {
+ my $line = 0;
+ %bubble_lines_per_response = ();
+ while ($env{"form.scantron.bubblelines.$line"}) {
+ my $value = $env{"form.scantron.bubblelines.$line"};
+ $bubble_lines_per_response{$line} = $value;
+ $first_bubble_line{$line} =
+ $env{"form.scantron.first_bubble_line.$line"};
+ $subdivided_bubble_lines{$line} =
+ $env{"form.scantron.sub_bubblelines.$line"};
+ $responsetype_per_response{$line} =
+ $env{"form.scantron.responsetype.$line"};
+ $line++;
+ }
+
+}
+
+# Given the parsed scanline, get the response for
+# 'answer' number n:
+
+sub get_response_bubbles {
+ my ($parsed_line, $response) = @_;
+
+
+ my $bubble_line = $first_bubble_line{$response-1} +1;
+ my $bubble_lines= $bubble_lines_per_response{$response-1};
+
+ my $selected = "";
+
+ for (my $bline = 0; $bline < $bubble_lines; $bline++) {
+ $selected .= $$parsed_line{"scantron.$bubble_line.answer"}.":";
+ $bubble_line++;
+ }
+ return $selected;
+}
=pod
@@ -4687,8 +4839,9 @@ sub getSequenceDropDown {
sub scantron_filenames {
my $cdom=$env{'course.'.$env{'request.course.id'}.'.domain'};
my $cname=$env{'course.'.$env{'request.course.id'}.'.num'};
+ my $getpropath = 1;
my @files=&Apache::lonnet::dirlist('userfiles',$cdom,$cname,
- &propath($cdom,$cname));
+ $getpropath);
my @possiblenames;
foreach my $filename (sort(@files)) {
($filename)=split(/&/,$filename);
@@ -4731,19 +4884,76 @@ sub scantron_uploads {
=cut
sub scantron_scantab {
- my $fh=Apache::File->new($Apache::lonnet::perlvar{'lonTabDir'}.'/scantronformat.tab');
my $result=''."\n";
$result.=''."\n";
- foreach my $line (<$fh>) {
- my ($name,$descrip)=split(/:/,$line);
- if ($name =~ /^\#/) { next; }
- $result.=''."\n";
+ my @lines = &get_scantronformat_file();
+ if (@lines > 0) {
+ foreach my $line (@lines) {
+ next if (($line =~ /^\#/) || ($line eq ''));
+ my ($name,$descrip)=split(/:/,$line);
+ $result.=''."\n";
+ }
}
$result.=''."\n";
-
return $result;
}
+=pod
+
+=item get_scantronformat_file
+
+ Returns an array containing lines from the scantron format file for
+ the domain of the course.
+
+ If a url for a custom.tab file is listed in domain's configuration.db,
+ lines are from this file.
+
+ Otherwise, if a default.tab has been published in RES space by the
+ domainconfig user, lines are from this file.
+
+ Otherwise, fall back to getting lines from the legacy file on the
+ local server: /home/httpd/lonTabs/default_scantronformat.tab
+
+=cut
+
+sub get_scantronformat_file {
+ my $cdom= $env{'course.'.$env{'request.course.id'}.'.domain'};
+ my %domconfig = &Apache::lonnet::get_dom('configuration',['scantron'],$cdom);
+ my $gottab = 0;
+ my @lines;
+ if (ref($domconfig{'scantron'}) eq 'HASH') {
+ if ($domconfig{'scantron'}{'scantronformat'} ne '') {
+ my $formatfile = &Apache::lonnet::getfile($Apache::lonnet::perlvar{'lonDocRoot'}.$domconfig{'scantron'}{'scantronformat'});
+ if ($formatfile ne '-1') {
+ @lines = split("\n",$formatfile,-1);
+ $gottab = 1;
+ }
+ }
+ }
+ if (!$gottab) {
+ my $confname = $cdom.'-domainconfig';
+ my $default = $Apache::lonnet::perlvar{'lonDocRoot'}.'/res/'.$cdom.'/'.$confname.'/default.tab';
+ my $formatfile = &Apache::lonnet::getfile($default);
+ if ($formatfile ne '-1') {
+ @lines = split("\n",$formatfile,-1);
+ $gottab = 1;
+ }
+ }
+ if (!$gottab) {
+ my @domains = &Apache::lonnet::current_machine_domains();
+ if (grep(/^\Q$cdom\E$/,@domains)) {
+ my $fh=Apache::File->new($Apache::lonnet::perlvar{'lonTabDir'}.'/scantronformat.tab');
+ @lines = <$fh>;
+ close($fh);
+ } else {
+ my $fh=Apache::File->new($Apache::lonnet::perlvar{'lonTabDir'}.'/default_scantronformat.tab');
+ @lines = <$fh>;
+ close($fh);
+ }
+ }
+ return @lines;
+}
+
=pod
=item scantron_CODElist
@@ -4776,11 +4986,11 @@ sub scantron_CODElist {
=cut
sub scantron_CODEunique {
- my $result='
+ my $result=''.&mt('Yes').'
-
+ '.&mt('No').' ';
@@ -4817,54 +5027,52 @@ sub scantron_selectphase {
my $CODE_unique=&scantron_CODEunique();
my $result;
+ $ssi_error = 0;
+
# Chunk of form to prompt for a file to grade and how:
- $result.= <
-
-
-
-SCANTRONFORM
+ '.&Apache::loncommon::end_data_table_row().'
+ '.&Apache::loncommon::end_data_table().'
+
+';
$r->print($result);
@@ -4873,86 +5081,105 @@ SCANTRONFORM
# Chunk of form to prompt for a scantron file upload.
- $r->print(<
-
-SCANTRONFORM
+');
my $default_form_data=&defaultFormData(&get_symb($r,1));
my $cdom= $env{'course.'.$env{'request.course.id'}.'.domain'};
my $cnum= $env{'course.'.$env{'request.course.id'}.'.num'};
- $r->print(<print('
-
-SCANTRONFORM
+ '.&Apache::loncommon::end_data_table_row().'
+ '.&Apache::loncommon::end_data_table().'
+');
}
# Chunk of the form that prompts to view a scoring office file,
# corrected file, skipped records in a file.
- $r->print(<
-
');
$r->print($grading_menu_button);
- return
+ return;
}
=pod
@@ -5014,10 +5241,10 @@ SCANTRONFORM
sub get_scantron_config {
my ($which) = @_;
- my $fh=Apache::File->new($Apache::lonnet::perlvar{'lonTabDir'}.'/scantronformat.tab');
+ my @lines = &get_scantronformat_file();
my %config;
#FIXME probably should move to XML it has already gotten a bit much now
- foreach my $line (<$fh>) {
+ foreach my $line (@lines) {
my ($name,$descrip)=split(/:/,$line);
if ($name ne $which ) { next; }
chomp($line);
@@ -5030,7 +5257,7 @@ sub get_scantron_config {
$config{'IDstart'}=$config[5];
$config{'IDlength'}=$config[6];
$config{'Qstart'}=$config[7];
- $config{'Qlength'}=$config[8];
+ $config{'Qlength'}=$config[8];
$config{'Qoff'}=$config[9];
$config{'Qon'}=$config[10];
$config{'PaperID'}=$config[11];
@@ -5104,6 +5331,8 @@ sub username_to_idmap {
- 'answer'
'response' - new answer or 'none' if blank
'question' - the bubble line to change
+ 'questionnum' - the question identifier,
+ may include subquestion.
Returns:
$line - the modified scanline
@@ -5116,8 +5345,6 @@ sub username_to_idmap {
sub scantron_fixup_scanline {
my ($scantron_config,$scan_data,$line,$whichline,$field,$args)=@_;
-
-
if ($field eq 'ID') {
if (length($args->{'newid'}) > $$scantron_config{'IDlength'}) {
return ($line,1,'New value too large');
@@ -5148,52 +5375,28 @@ sub scantron_fixup_scanline {
$$scantron_config{'CODElength'})=$args->{'CODE'};
}
} elsif ($field eq 'answer') {
- &scantron_get_maxbubble(); # Need the bubble counter info.
my $length=$scantron_config->{'Qlength'};
my $off=$scantron_config->{'Qoff'};
my $on=$scantron_config->{'Qon'};
my $answer=${off}x$length;
- my $question_number = $args->{'question'} -1;
- my $first_position = $first_bubble_line{$question_number};
- my $bubble_count = $bubble_lines_per_response{$question_number};
- my $bubbles_per_line= $$scantron_config{'Qlength'};
- my $final_answer;
- if ($$scantron_config{'Qon'} eq 'letter' ||
- $$scantron_config{'Qon'} eq 'number') {
- $bubbles_per_line = 10;
- }
- if (defined $args->{'response'}) {
-
- if ($args->{'response'} eq 'none') {
- &scan_data($scan_data,
- "$whichline.no_bubble.".$args->{'question'},'1');
+ if ($args->{'response'} eq 'none') {
+ &scan_data($scan_data,
+ "$whichline.no_bubble.".$args->{'questionnum'},'1');
+ } else {
+ if ($on eq 'letter') {
+ my @alphabet=('A'..'Z');
+ $answer=$alphabet[$args->{'response'}];
+ } elsif ($on eq 'number') {
+ $answer=$args->{'response'}+1;
+ if ($answer == 10) { $answer = '0'; }
} else {
- my ($bubble_line, $bubble_number) = split(/:/,$args->{'response'});
- if ($on eq 'letter') {
- my @alphabet=('A'..'Z');
- $answer=$alphabet[$bubble_number];
- } elsif ($on eq 'number') {
- $answer=$args->{$bubble_number+1};
- if ($answer == 10) { $answer = '0'; }
- } else {
- substr($answer,$args->{'response'},1)=$on;
- }
- &scan_data($scan_data,
- "$whichline.no_bubble.".$args->{'question'},undef,'1');
- for (my $l = 0; $l < $bubble_count; $l++) {
- if ($l eq $bubble_line) {
- $final_answer .= $answer;
- } else {
- $final_answer .= ' ';
- }
- }
+ substr($answer,$args->{'response'},1)=$on;
}
- # $where=$length*($args->{'question'}-1)+$scantron_config->{'Qstart'};
- #substr($line,$where-1,$length)=$answer;
- substr($line,
- $scantron_config->{'Qstart'}+$first_position-1,
- $bubbles_per_line) = $final_answer;
+ &scan_data($scan_data,
+ "$whichline.no_bubble.".$args->{'questionnum'},undef,'1');
}
+ my $where=$length*($args->{'question'}-1)+$scantron_config->{'Qstart'};
+ substr($line,$where-1,$length)=$answer;
}
return $line;
}
@@ -5227,6 +5430,39 @@ sub scan_data {
return $scan_data->{$filename.'_'.$key};
}
+# ----- These first few routines are general use routines.----
+
+# Return the number of occurences of a pattern in a string.
+
+sub occurence_count {
+ my ($string, $pattern) = @_;
+
+ my @matches = ($string =~ /$pattern/g);
+
+ return scalar(@matches);
+}
+
+
+# Take a string known to have digits and convert all the
+# digits into letters in the range J,A..I.
+
+sub digits_to_letters {
+ my ($input) = @_;
+
+ my @alphabet = ('J', 'A'..'I');
+
+ my @input = split(//, $input);
+ my $output ='';
+ for (my $i = 0; $i < scalar(@input); $i++) {
+ if ($input[$i] =~ /\d/) {
+ $output .= $alphabet[$input[$i]];
+ } else {
+ $output .= $input[$i];
+ }
+ }
+ return $output;
+}
+
=pod
=item scantron_parse_scanline
@@ -5288,7 +5524,8 @@ sub scantron_parse_scanline {
my ($line,$whichline,$scantron_config,$scan_data,$just_header)=@_;
my %record;
- my $questions=substr($line,$$scantron_config{'Qstart'}-1); # Answers
+ my $lastpos = $env{'form.scantron_maxbubble'}*$$scantron_config{'Qlength'};
+ my $questions=substr($line,$$scantron_config{'Qstart'}-1,$lastpos); # Answers
my $data=substr($line,0,$$scantron_config{'Qstart'}-1); # earlier stuff
if (!($$scantron_config{'CODElocation'} eq 0 ||
$$scantron_config{'CODElocation'} eq 'none')) {
@@ -5329,163 +5566,218 @@ sub scantron_parse_scanline {
$questions =~ s/\r$//; # Get rid of trailing \r too (MAC or Win uploads).
while (length($questions)) {
my $answers_needed = $bubble_lines_per_response{$questnum};
- my $answer_length = $$scantron_config{'Qlength'} * $answers_needed;
-
-
-
- $questnum++;
- my $currentquest = substr($questions,0,$answer_length);
- $questions = substr($questions,0,$answer_length)='';
- if (length($currentquest) < $answer_length) { next; }
-
- # Qon letter implies for each slot in currentquest we have:
- # ? or * for doubles a letter in A-Z for a bubble and
- # about anything else (esp. a value of Qoff for missing
- # bubbles.
-
-
- if ($$scantron_config{'Qon'} eq 'letter') {
-
- if ($currentquest =~ /\?/
- || $currentquest =~ /\*/
- || (&occurence_count($currentquest, "[A-Z]") > 1)) {
- push(@{$record{'scantron.doubleerror'}},$questnum);
- for (my $ans = 0; $ans < $answers_needed; $ans++) {
- my $bubble = substr($currentquest, $ans, 1);
- if ($bubble =~ /[A-Z]/ ) {
- $record{"scantron.$ansnum.answer"} = $bubble;
- } else {
- $record{"scantron.$ansnum.answer"}='';
- }
- $ansnum++;
- }
-
- } elsif (!defined($currentquest)
- || (&occurence_count($currentquest, $$scantron_config{'Qoff'}) == length($currentquest))
- || (&occurence_count($currentquest, "[A-Z]") == 0)) {
- for (my $ans = 0; $ans < $answers_needed; $ans++ ) {
- $record{"scantron.$ansnum.answer"}='';
- $ansnum++;
-
- }
- if (!&scan_data($scan_data,"$whichline.no_bubble.$questnum")) {
- push(@{$record{"scantron.missingerror"}},$questnum);
- # $ansnum += $answers_needed;
- }
- } else {
- for (my $ans = 0; $ans < $answers_needed; $ans++) {
- $record{"scantron.$ansnum.answer"} = substr($currentquest, $ans, 1);
- $ansnum++;
- }
- }
-
- # Qon 'number' implies each slot gives a digit that indexes the
- # the bubbles filled or Qoff or a non number for unbubbled lines.
- # and *? for double bubbles on a line.
- # these answers are also stored as letters.
-
- } elsif ($$scantron_config{'Qon'} eq 'number') {
- if ($currentquest =~ /\?/
- || $currentquest =~ /\*/
- || (&occurence_count($currentquest, '\d') > 1)) {
- push(@{$record{'scantron.doubleerror'}},$questnum);
- for (my $ans = 0; $ans < $answers_needed; $ans++) {
- my $bubble = substr($currentquest, $ans, 1);
- if ($bubble =~ /\d/) {
- $record{"scantron.$ansnum.answer"} = $alphabet[$bubble];
- } else {
- $record{"scantron.$ansnum.answer"}=' ';
- }
- $ansnum++;
- }
-
- } elsif (!defined($currentquest)
- || (&occurence_count($currentquest,$$scantron_config{'Qoff'}) == length($currentquest))
- || (&occurence_count($currentquest, '\d') == 0)) {
- for (my $ans = 0; $ans < $answers_needed; $ans++ ) {
- $record{"scantron.$ansnum.answer"}='';
- $ansnum++;
+ my $answer_length = ($$scantron_config{'Qlength'} * $answers_needed)
+ || 1;
+ $questnum++;
+ my $quest_id = $questnum;
+ my $currentquest = substr($questions,0,$answer_length);
+ $questions = substr($questions,$answer_length);
+ if (length($currentquest) < $answer_length) { next; }
+
+ if ($subdivided_bubble_lines{$questnum-1} =~ /,/) {
+ my $subquestnum = 1;
+ my $subquestions = $currentquest;
+ my @subanswers_needed =
+ split(/,/,$subdivided_bubble_lines{$questnum-1});
+ foreach my $subans (@subanswers_needed) {
+ my $subans_length =
+ ($$scantron_config{'Qlength'} * $subans) || 1;
+ my $currsubquest = substr($subquestions,0,$subans_length);
+ $subquestions = substr($subquestions,$subans_length);
+ $quest_id = "$questnum.$subquestnum";
+ if (($$scantron_config{'Qon'} eq 'letter') ||
+ ($$scantron_config{'Qon'} eq 'number')) {
+ $ansnum = &scantron_validator_lettnum($ansnum,
+ $questnum,$quest_id,$subans,$currsubquest,$whichline,
+ \@alphabet,\%record,$scantron_config,$scan_data);
+ } else {
+ $ansnum = &scantron_validator_positional($ansnum,
+ $questnum,$quest_id,$subans,$currsubquest,$whichline, \@alphabet,\%record,$scantron_config,$scan_data);
+ }
+ $subquestnum ++;
+ }
+ } else {
+ if (($$scantron_config{'Qon'} eq 'letter') ||
+ ($$scantron_config{'Qon'} eq 'number')) {
+ $ansnum = &scantron_validator_lettnum($ansnum,$questnum,
+ $quest_id,$answers_needed,$currentquest,$whichline,
+ \@alphabet,\%record,$scantron_config,$scan_data);
+ } else {
+ $ansnum = &scantron_validator_positional($ansnum,$questnum,
+ $quest_id,$answers_needed,$currentquest,$whichline,
+ \@alphabet,\%record,$scantron_config,$scan_data);
+ }
+ }
+ }
+ $record{'scantron.maxquest'}=$questnum;
+ return \%record;
+}
- }
- if (!&scan_data($scan_data,"$whichline.no_bubble.$questnum")) {
- push(@{$record{"scantron.missingerror"}},$questnum);
- $ansnum += $answers_needed;
- }
+sub scantron_validator_lettnum {
+ my ($ansnum,$questnum,$quest_id,$answers_needed,$currquest,$whichline,
+ $alphabet,$record,$scantron_config,$scan_data) = @_;
+
+ # Qon 'letter' implies for each slot in currquest we have:
+ # ? or * for doubles, a letter in A-Z for a bubble, and
+ # about anything else (esp. a value of Qoff) for missing
+ # bubbles.
+ #
+ # Qon 'number' implies each slot gives a digit that indexes the
+ # bubbles filled, or Qoff, or a non-number for unbubbled lines,
+ # and * or ? for double bubbles on a single line.
+ #
- } else {
- $currentquest = &digits_to_letters($currentquest);
- for (my $ans =0; $ans < $answers_needed; $ans++) {
- $record{"scantron.$ansnum.answer"} = substr($currentquest, $ans, 1);
- $ansnum++;
- }
- }
- } else {
+ my $matchon;
+ if ($$scantron_config{'Qon'} eq 'letter') {
+ $matchon = '[A-Z]';
+ } elsif ($$scantron_config{'Qon'} eq 'number') {
+ $matchon = '\d';
+ }
+ my $occurrences = 0;
+ if (($responsetype_per_response{$questnum-1} eq 'essayresponse') ||
+ ($responsetype_per_response{$questnum-1} eq 'formularesponse') ||
+ ($responsetype_per_response{$questnum-1} eq 'stringresponse') ||
+ ($responsetype_per_response{$questnum-1} eq 'imageresponse') ||
+ ($responsetype_per_response{$questnum-1} eq 'reactionresponse') ||
+ ($responsetype_per_response{$questnum-1} eq 'organicresponse')) {
+ my @singlelines = split('',$currquest);
+ foreach my $entry (@singlelines) {
+ $occurrences = &occurence_count($entry,$matchon);
+ if ($occurrences > 1) {
+ last;
+ }
+ }
+ } else {
+ $occurrences = &occurence_count($currquest,$matchon);
+ }
+ if (($currquest =~ /\?/ || $currquest =~ /\*/) || ($occurrences > 1)) {
+ push(@{$record->{'scantron.doubleerror'}},$quest_id);
+ for (my $ans=0; $ans<$answers_needed; $ans++) {
+ my $bubble = substr($currquest,$ans,1);
+ if ($bubble =~ /$matchon/ ) {
+ if ($$scantron_config{'Qon'} eq 'number') {
+ if ($bubble == 0) {
+ $bubble = 10;
+ }
+ $record->{"scantron.$ansnum.answer"} =
+ $alphabet->[$bubble-1];
+ } else {
+ $record->{"scantron.$ansnum.answer"} = $bubble;
+ }
+ } else {
+ $record->{"scantron.$ansnum.answer"}='';
+ }
+ $ansnum++;
+ }
+ } elsif (!defined($currquest)
+ || (&occurence_count($currquest, $$scantron_config{'Qoff'}) == length($currquest))
+ || (&occurence_count($currquest,$matchon) == 0)) {
+ for (my $ans=0; $ans<$answers_needed; $ans++ ) {
+ $record->{"scantron.$ansnum.answer"}='';
+ $ansnum++;
+ }
+ if (!&scan_data($scan_data,"$whichline.no_bubble.$quest_id")) {
+ push(@{$record->{'scantron.missingerror'}},$quest_id);
+ }
+ } else {
+ if ($$scantron_config{'Qon'} eq 'number') {
+ $currquest = &digits_to_letters($currquest);
+ }
+ for (my $ans=0; $ans<$answers_needed; $ans++) {
+ my $bubble = substr($currquest,$ans,1);
+ $record->{"scantron.$ansnum.answer"} = $bubble;
+ $ansnum++;
+ }
+ }
+ return $ansnum;
+}
- # Otherwise there's a positional notation;
- # each bubble line requires Qlength items, and there are filled in
- # bubbles for each case where there 'Qon' characters.
- #
+sub scantron_validator_positional {
+ my ($ansnum,$questnum,$quest_id,$answers_needed,$currquest,
+ $whichline,$alphabet,$record,$scantron_config,$scan_data) = @_;
- my @array=split($$scantron_config{'Qon'},$currentquest,-1);
+ # Otherwise there's a positional notation;
+ # each bubble line requires Qlength items, and there are filled in
+ # bubbles for each case where there 'Qon' characters.
+ #
- # If the split only giveas us one element.. the full length of the
- # answser string, no bubbles are filled in:
+ my @array=split($$scantron_config{'Qon'},$currquest,-1);
- if (length($array[0]) eq $$scantron_config{'Qlength'}*$answers_needed) {
- for (my $ans = 0; $ans < $answers_needed; $ans++ ) {
- $record{"scantron.$ansnum.answer"}='';
- $ansnum++;
+ # If the split only gives us one element.. the full length of the
+ # answer string, no bubbles are filled in:
- }
- if (!&scan_data($scan_data,"$whichline.no_bubble.$questnum")) {
- push(@{$record{"scantron.missingerror"}},$questnum);
- }
- } elsif (scalar(@array) lt 2) {
+ if ($answers_needed eq '') {
+ return;
+ }
- my $location = length($array[0]);
- my $line_num = $location / $$scantron_config{'Qlength'};
- my $bubble = $alphabet[$location % $$scantron_config{'Qlength'}];
+ if (length($array[0]) eq $$scantron_config{'Qlength'}*$answers_needed) {
+ for (my $ans=0; $ans<$answers_needed; $ans++ ) {
+ $record->{"scantron.$ansnum.answer"}='';
+ $ansnum++;
+ }
+ if (!&scan_data($scan_data,"$whichline.no_bubble.$quest_id")) {
+ push(@{$record->{"scantron.missingerror"}},$quest_id);
+ }
+ } elsif (scalar(@array) == 2) {
+ my $location = length($array[0]);
+ my $line_num = int($location / $$scantron_config{'Qlength'});
+ my $bubble = $alphabet->[$location % $$scantron_config{'Qlength'}];
+ for (my $ans=0; $ans<$answers_needed; $ans++) {
+ if ($ans eq $line_num) {
+ $record->{"scantron.$ansnum.answer"} = $bubble;
+ } else {
+ $record->{"scantron.$ansnum.answer"} = ' ';
+ }
+ $ansnum++;
+ }
+ } else {
+ # If there's more than one instance of a bubble character
+ # That's a double bubble; with positional notation we can
+ # record all the bubbles filled in as well as the
+ # fact this response consists of multiple bubbles.
+ #
+ if (($responsetype_per_response{$questnum-1} eq 'essayresponse') ||
+ ($responsetype_per_response{$questnum-1} eq 'formularesponse') ||
+ ($responsetype_per_response{$questnum-1} eq 'stringresponse') ||
+ ($responsetype_per_response{$questnum-1} eq 'imageresponse') ||
+ ($responsetype_per_response{$questnum-1} eq 'reactionresponse') ||
+ ($responsetype_per_response{$questnum-1} eq 'organicresponse')) {
+ my $doubleerror = 0;
+ while (($currquest >= $$scantron_config{'Qlength'}) &&
+ (!$doubleerror)) {
+ my $currline = substr($currquest,0,$$scantron_config{'Qlength'});
+ $currquest = substr($currquest,$$scantron_config{'Qlength'});
+ my @currarray = split($$scantron_config{'Qon'},$currline,-1);
+ if (length(@currarray) > 2) {
+ $doubleerror = 1;
+ }
+ }
+ if ($doubleerror) {
+ push(@{$record->{'scantron.doubleerror'}},$quest_id);
+ }
+ } else {
+ push(@{$record->{'scantron.doubleerror'}},$quest_id);
+ }
+ my $item = $ansnum;
+ for (my $ans=0; $ans<$answers_needed; $ans++) {
+ $record->{"scantron.$item.answer"} = '';
+ $item ++;
+ }
- for (my $ans = 0; $ans < $answers_needed; $ans++) {
- if ($ans eq $line_num) {
- $record{"scantron.$ansnum.answer"} = $bubble;
- } else {
- $record{"scantron.$ansnum.answer"} = ' ';
- }
- $ansnum++;
- }
- }
- # If there's more than one instance of a bubble character
- # That's a double bubble; with positional notation we can
- # record all the bubbles filled in as well as the
- # fact this response consists of multiple bubbles.
- #
- else {
- push(@{$record{'scantron.doubleerror'}},$questnum);
-
- my $first_answer = $ansnum;
- for (my $ans =0; $ans < $answers_needed; $ans++) {
- my $item = $first_answer+$ans;
- $record{"scantron.$item.answer"} = '';
- }
-
- my @ans=@array;
- my $i=0;
- my $increment = 0;
- while ($#ans) {
- $i+=length($ans[0]) + $increment;
- my $line = int($i/$$scantron_config{'Qlength'} + $first_answer);
- my $bubble = $i%$$scantron_config{'Qlength'};
- $record{"scantron.$line.answer"}.=$alphabet[$bubble];
- shift(@ans);
- $increment = 1;
- }
- $ansnum += $answers_needed;
- }
- }
+ my @ans=@array;
+ my $i=0;
+ my $increment = 0;
+ while ($#ans) {
+ $i+=length($ans[0]) + $increment;
+ my $line = int($i/$$scantron_config{'Qlength'} + $ansnum);
+ my $bubble = $i%$$scantron_config{'Qlength'};
+ $record->{"scantron.$line.answer"}.=$alphabet->[$bubble];
+ shift(@ans);
+ $increment = 1;
+ }
+ $ansnum += $answers_needed;
}
- $record{'scantron.maxquest'}=$questnum;
- return \%record;
+ return $ansnum;
}
=pod
@@ -5625,7 +5917,8 @@ sub scantron_process_corrections {
&scantron_fixup_scanline(\%scantron_config,$scan_data,$line,
$which,'answer',
{ 'question'=>$question,
- 'response'=>$env{"form.scantron_correct_Q_$question"}});
+ 'response'=>$env{"form.scantron_correct_Q_$question"},
+ 'questionnum'=>$env{"form.scantron_questionnum_Q_$question"}});
if ($err) { last; }
}
}
@@ -5730,7 +6023,7 @@ sub remember_current_skipped {
sub check_for_error {
my ($r,$result)=@_;
if ($result ne 'ok' && $result ne 'not_found' ) {
- $r->print("An error occurred ($result) when trying to Remove the existing corrections.");
+ $r->print(&mt("An error occurred ([_1]) when trying to remove the existing corrections.",$result));
}
}
@@ -5754,25 +6047,25 @@ sub scantron_warning_screen {
$CODElist=$env{'form.scantron_CODElist'};
if ($env{'form.scantron_CODElist'} eq '') { $CODElist='None'; }
$CODElist=
- '
List of CODES to validate against:
'.
+ '
'.&mt('List of CODES to validate against:').'
'.
$env{'form.scantron_CODElist'}.'
';
}
- return (<
-Please double check the information
- below before clicking on '$button_text'
+
+'.&mt('Please double check the information below before clicking on \'[_1]\'',&mt($button_text)).'
-
Sequence to be Graded:
$title
-
Data File that will be used:
$env{'form.scantron_selectfile'}
-$CODElist
+
'.&mt('Sequence to be Graded:').'
'.$title.'
+
'.&mt('Data File that will be used:').'
'.$env{'form.scantron_selectfile'}.'
+'.$CODElist.'
-
If this information is correct, please click on '$button_text'.
-
If something is incorrect, please click the 'Grading Menu' button to start over.
+
'.&mt('If this information is correct, please click on \'[_1]\'.',&mt($button_text)).'
+
'.&mt('If something is incorrect, please click the \'Grading Menu\' button to start over.').'
');$r->rflush();
#get the student pick code ready
$r->print(&Apache::loncommon::studentbrowser_javascript());
my $max_bubble=&scantron_get_maxbubble();
@@ -5908,7 +6205,7 @@ sub scantron_validate_file {
my $stop=0;
while (!$stop && $currentphase < scalar(@validate_phases)) {
- $r->print("
Validating ".$validate_phases[$currentphase]."
");
+ $r->print(&mt('Validating '.$validate_phases[$currentphase]).' ');
$r->rflush();
my $which="scantron_validate_".$validate_phases[$currentphase];
{
@@ -5917,29 +6214,37 @@ sub scantron_validate_file {
}
}
if (!$stop) {
- my $warning=&scantron_warning_screen('Start Grading');
- $r->print(<
-$warning
-
-
-STUFF
-
+ my $warning=&scantron_warning_screen('Start Grading');
+ $r->print(&mt('Validation process complete.').' '.
+ $warning.
+ &mt('Perform verification for each student after storage of submissions?').
+ ' '.
+ ''.&mt('Yes').''.
+ (' 'x3).''.
+ ''.&mt('No').
+ ' '.
+ &mt('Grading will take longer if you use verification.').' '. &mt("Alternatively, the 'Review scantron data' utility (see grading menu) can be used for all students after grading is complete.").'
".&mt("Or click the 'Grading Menu' button to start over.")."
");
} else {
- $r->print('');
- $r->print(' using corrected info ');
- $r->print("");
- $r->print(" this scanline saving it for later.");
+ if ($validate_phases[$currentphase] eq 'doublebubble' || $validate_phases[$currentphase] eq 'missingbubbles') {
+ $r->print('');
+ } else {
+ $r->print('');
+ }
+ $r->print(' '.&mt('using corrected info').' ');
+ $r->print("");
+ $r->print(" ".&mt("this scanline saving it for later."));
}
}
$r->print(" ".&show_grading_menu_form($symb));
@@ -6000,7 +6305,10 @@ sub scantron_remove_scan_data {
}
my $result;
if (@todelete) {
- $result=&Apache::lonnet::del('nohist_scantrondata',\@todelete,$cdom,$cname);
+ $result = &Apache::lonnet::del('nohist_scantrondata',
+ \@todelete,$cdom,$cname);
+ } else {
+ $result = 'ok';
}
return $result;
}
@@ -6415,35 +6723,40 @@ sub scantron_validate_ID {
sub scantron_get_correction {
my ($r,$i,$scan_record,$scan_config,$line,$error,$arg)=@_;
-
#FIXME in the case of a duplicated ID the previous line, probably need
#to show both the current line and the previous one and allow skipping
#the previous one or the current one
- $r->print("
An error was detected ($error)");
if ( $$scan_record{'scantron.PaperID'} =~ /\S/) {
- $r->print(" for PaperID ".
- $$scan_record{'scantron.PaperID'}." \n");
+ $r->print("
".&mt("An error was detected ($error)".
+ " for PaperID [_1]",
+ $$scan_record{'scantron.PaperID'})."
\n");
} else {
- $r->print(" in scanline $i
".
- $line."
\n");
- }
- my $message="
The ID on the form is ".
- $$scan_record{'scantron.ID'}." \n".
- "The name on the paper is ".
- $$scan_record{'scantron.LastName'}.",".
- $$scan_record{'scantron.FirstName'}."
";
+ $r->print("
".&mt("An error was detected ($error)".
+ " in scanline [_1]
[_2]
",
+ $i,$line)." \n");
+ }
+ my $message="
".&mt("The ID on the form is [_1] ".
+ "The name on the paper is [_2],[_3]",
+ $$scan_record{'scantron.ID'},
+ $$scan_record{'scantron.LastName'},
+ $$scan_record{'scantron.FirstName'})."
";
$r->print(''."\n");
$r->print(''."\n");
+ # Array populated for doublebubble or
+ my @lines_to_correct; # missingbubble errors to build javascript
+ # to validate radio button checking
+
if ($error =~ /ID$/) {
if ($error eq 'incorrectID') {
- $r->print("The encoded ID is not in the classlist\n");
+ $r->print("
".&mt("The encoded ID is not in the classlist").
+ "
\n");
} elsif ($error eq 'duplicateID') {
- $r->print("The encoded ID has also been used by a previous paper $arg\n");
+ $r->print("
".&mt("The encoded ID has also been used by a previous paper [_1]",$arg)."
\n");
}
$r->print($message);
- $r->print("
How should I handle this? \n");
+ $r->print("
".&mt("How should I handle this?")." \n");
$r->print("\n
");
#FIXME it would be nice if this sent back the user ID and
#could do partial userID matches
@@ -6456,14 +6769,14 @@ sub scantron_get_correction {
$r->print('
The encoded CODE has also been used by a previous paper ".join(', ',@{$arg}).", and CODEs are supposed to be unique
\n");
+ $r->print("
".&mt("The encoded CODE has also been used by a previous paper [_1], and CODEs are supposed to be unique.",join(', ',@{$arg}))."
\n");
}
- $r->print("
The CODE on the form is '".
- $$scan_record{'scantron.CODE'}."' \n");
+ $r->print("
".&mt("The CODE on the form is '[_1]'",
+ $$scan_record{'scantron.CODE'})." \n");
$r->print($message);
- $r->print("
How should I handle this? \n");
+ $r->print("
".&mt("How should I handle this?")." \n");
$r->print("\n ");
my $i=0;
if ($error eq 'incorrectCODE'
@@ -6473,7 +6786,13 @@ sub scantron_get_correction {
foreach my $testcode (@{$closest}) {
my $checked='';
if (!$i) { $checked=' checked="checked" '; }
- $r->print(" Use the similar CODE ".$testcode." instead.");
+ $r->print("
+
+
+ ".&mt("Use the similar CODE [_1] instead.",
+ "".$testcode."")."
+
+ ");
$r->print("\n ");
$i++;
}
@@ -6481,7 +6800,12 @@ sub scantron_get_correction {
}
if ($$scan_record{'scantron.CODE'}=~/\S/ ) {
my $checked; if (!$i) { $checked=' checked="checked" '; }
- $r->print(" Use the CODE ".$$scan_record{'scantron.CODE'}." that is was on the paper, ignoring the error.");
+ $r->print("
+
+
+ ".&mt("Use the CODE [_1] that is was on the paper, ignoring the error.",
+ "".$$scan_record{'scantron.CODE'}."")."
+ ");
$r->print("\n ");
}
@@ -6503,118 +6827,274 @@ ENDSCRIPT
"&curCODE=".&escape($$scan_record{'scantron.CODE'}).
"&scantron_selectfile=".&escape($env{'form.scantron_selectfile'});
if ($env{'form.scantron_CODElist'} =~ /\S/) {
- $r->print("Select a CODE from the list of all CODEs and use it. Selected CODE is ");
+ $r->print("
+
+
+ ".&mt("[_1]Select[_2] a CODE from the list of all CODEs and use it.",
+ "","")."
+
+ ".&mt('Selected CODE is [_1]',''));
$r->print("\n ");
}
- $r->print(" Use as the CODE.");
+ $r->print("
+
+
+ ".&mt("Use [_1] as the CODE.",
+ ""));
$r->print("\n
There have been multiple bubbles scanned for a some question(s)
\n");
+ $r->print("
".&mt("There have been multiple bubbles scanned for some question(s)")."
\n");
+
+ # The form field scantron_questions is acutally a list of line numbers.
+ # represented by this form so:
+
+ my $line_list = &questions_to_line_list($arg);
+
$r->print('');
+ $line_list.'" />');
$r->print($message);
- $r->print("
Please indicate which bubble should be used for grading
");
+ $r->print("
".&mt("Please indicate which bubble should be used for grading")."
There have been no bubbles scanned for some question(s)
\n");
+ $r->print("
".&mt("There have been no bubbles scanned for some question(s)")."
\n");
$r->print($message);
- $r->print("
Please indicate which bubble should be used for grading
");
- $r->print("Some questions have no scanned bubbles\n");
+ $r->print("
".&mt("Please indicate which bubble should be used for grading.")."
");
+ $r->print(&mt("Some questions have no scanned bubbles.")."\n");
+
+ # The form field scantron_questions is actually a list of line numbers not
+ # a list of question numbers. Therefore:
+ #
+
+ my $line_list = &questions_to_line_list($arg);
+
$r->print('');
+ $line_list.'" />');
foreach my $question (@{$arg}) {
- my $selected = &get_response_bubbles($scan_record, $question);
- my @select_array = split(/:/,$selected); # ought to be an array of empties.
- &scantron_bubble_selector($r,$scan_config,$question, @select_array);
+ my @linenums = &prompt_for_corrections($r,$question,$scan_config,
+ $scan_record, $error);
+ push(@lines_to_correct,@linenums);
}
+ $r->print(&verify_bubbles_checked(@lines_to_correct));
} else {
$r->print("\n
");
}
$r->print("\n
");
+}
+sub verify_bubbles_checked {
+ my (@ansnums) = @_;
+ my $ansnumstr = join('","',@ansnums);
+ my $warning = &mt("A bubble or 'No bubble' selection has not been made for one or more lines.");
+ my $output = (<
+function verify_bubble_radio(form) {
+ var ansnumArray = new Array ("$ansnumstr");
+ var need_bubble_count = 0;
+ for (var i=0; i 1) {
+ var bubble_picked = 0;
+ for (var j=0; j
+ENDSCRIPT
+ return $output;
}
=pod
-=item scantron_bubble_selector
-
- Generates the html radiobuttons to correct a single bubble line
- possibly showing the existing the selected bubbles if known
+=item questions_to_line_list
- Arguments:
- $r - Apache request object
- $scan_config - hash from &get_scantron_config()
- $quest - number of the bubble line to make a corrector for
- @lines - array of answer lines.
+Converts a list of questions into a string of comma separated
+line numbers in the answer sheet used by the questions. This is
+used to fill in the scantron_questions form field.
-=cut
+ Arguments:
+ questions - Reference to an array of questions.
-sub scantron_bubble_selector {
- my ($r,$scan_config,$quest,@lines)=@_;
- my $max=$$scan_config{'Qlength'};
+=cut
- my $scmode=$$scan_config{'Qon'};
+sub questions_to_line_list {
+ my ($questions) = @_;
+ my @lines;
+
+ foreach my $item (@{$questions}) {
+ my $question = $item;
+ my ($first,$count,$last);
+ if ($item =~ /^(\d+)\.(\d+)$/) {
+ $question = $1;
+ my $subquestion = $2;
+ $first = $first_bubble_line{$question-1} + 1;
+ my @subans = split(/,/,$subdivided_bubble_lines{$question-1});
+ my $subcount = 1;
+ while ($subcount<$subquestion) {
+ $first += $subans[$subcount-1];
+ $subcount ++;
+ }
+ $count = $subans[$subquestion-1];
+ } else {
+ $first = $first_bubble_line{$question-1} + 1;
+ $count = $bubble_lines_per_response{$question-1};
+ }
+ $last = $first+$count-1;
+ push(@lines, ($first..$last));
+ }
+ return join(',', @lines);
+}
- my $bubble_length = scalar(@lines);
+=pod
+=item prompt_for_corrections
- if ($scmode eq 'number' || $scmode eq 'letter') { $max=10; }
+Prompts for a potentially multiline correction to the
+user's bubbling (factors out common code from scantron_get_correction
+for multi and missing bubble cases).
- my $response = $quest-1;
- my $lines = $bubble_lines_per_response{$response};
+ Arguments:
+ $r - Apache request object.
+ $question - The question number to prompt for.
+ $scan_config - The scantron file configuration hash.
+ $scan_record - Reference to the hash that has the the parsed scanlines.
+ $error - Type of error
+
+ Implicit inputs:
+ %bubble_lines_per_response - Starting line numbers for each question.
+ Numbered from 0 (but question numbers are from
+ 1.
+ %first_bubble_line - Starting bubble line for each question.
+ %subdivided_bubble_lines - optionresponse, matchresponse and rankresponse
+ type problems render as separate sub-questions,
+ in exam mode. This hash contains a
+ comma-separated list of the lines per
+ sub-question.
+ %responsetype_per_response - essayresponse, formularesponse,
+ stringresponse, imageresponse, reactionresponse,
+ and organicresponse type problem parts can have
+ multiple lines per response if the weight
+ assigned exceeds 10. In this case, only
+ one bubble per line is permitted, but more
+ than one line might contain bubbles, e.g.
+ bubbling of: line 1 - J, line 2 - J,
+ line 3 - B would assign 22 points.
- my $total_lines = $lines*2;
- my @alphabet=('A'..'Z');
+=cut
- $r->print("
$quest
");
+sub prompt_for_corrections {
+ my ($r, $question, $scan_config, $scan_record, $error) = @_;
+ my ($current_line,$lines);
+ my @linenums;
+ my $questionnum = $question;
+ if ($question =~ /^(\d+)\.(\d+)$/) {
+ $question = $1;
+ $current_line = $first_bubble_line{$question-1} + 1 ;
+ my $subquestion = $2;
+ my @subans = split(/,/,$subdivided_bubble_lines{$question-1});
+ my $subcount = 1;
+ while ($subcount<$subquestion) {
+ $current_line += $subans[$subcount-1];
+ $subcount ++;
+ }
+ $lines = $subans[$subquestion-1];
+ } else {
+ $current_line = $first_bubble_line{$question-1} + 1 ;
+ $lines = $bubble_lines_per_response{$question-1};
+ }
+ if ($lines > 1) {
+ $r->print(&mt('The group of bubble lines below responds to a single question.').' ');
+ if (($responsetype_per_response{$question-1} eq 'essayresponse') ||
+ ($responsetype_per_response{$question-1} eq 'formularesponse') ||
+ ($responsetype_per_response{$question-1} eq 'stringresponse') ||
+ ($responsetype_per_response{$question-1} eq 'imageresponse') ||
+ ($responsetype_per_response{$question-1} eq 'reactionresponse') ||
+ ($responsetype_per_response{$question-1} eq 'organicresponse')) {
+ $r->print(&mt("Although this particular question type requires handgrading, the instructions for this question in the exam directed students to leave [quant,_1,line] blank on their scantron sheets.",$lines).'
'.&mt('A non-zero score can be assigned to the student during scantron grading by selecting a bubble in at least one line.').' '.&mt('The score for this question will be a sum of the numeric values for the selected bubbles from each line, where A=1 point, B=2 points etc.').' '.&mt("To assign a score of zero for this question, mark all lines as 'No bubble'.").'
');
+ } else {
+ $r->print(&mt("Select at most one bubble in a single line and select 'No Bubble' in all the other lines. ")." ");
+ }
+ }
+ for (my $i =0; $i < $lines; $i++) {
+ my $selected = $$scan_record{"scantron.$current_line.answer"};
+ &scantron_bubble_selector($r,$scan_config,$current_line,
+ $questionnum,$error,split('', $selected));
+ push(@linenums,$current_line);
+ $current_line++;
+ }
+ if ($lines > 1) {
+ $r->print(" ");
+ }
+ return @linenums;
+}
- for (my $l = 0; $l < $lines; $l++) {
- if ($l != 0) {
- $r->print('
');
- }
- my @selected = split(//,$lines[$l]);
- for (my $i=0;$i<$max;$i++) {
- $r->print("\n".'
');
-
- }
+=pod
- if ($l == 0) {
- my $lspan = $total_lines * 2; # 2 table rows per bubble line.
+=item scantron_bubble_selector
+
+ Generates the html radiobuttons to correct a single bubble line
+ possibly showing the existing the selected bubbles if known
- $r->print('
No bubble
');
-
- }
+ Arguments:
+ $r - Apache request object
+ $scan_config - hash from &get_scantron_config()
+ $line - Number of the line being displayed.
+ $questionnum - Question number (may include subquestion)
+ $error - Type of error.
+ @selected - Array of bubbles picked on this line.
- $r->print('
');
+=cut
- # FIXME: This may have to be a bit more clever for
- # multiline questions (different values e.g..).
+sub scantron_bubble_selector {
+ my ($r,$scan_config,$line,$questionnum,$error,@selected)=@_;
+ my $max=$$scan_config{'Qlength'};
- for (my $i=0;$i<$max;$i++) {
- my $value = "$l:$i"; # Relative bubble line #: Bubble in line.
- $r->print("\n".
- '
'."\n".
+ &Apache::loncommon::end_data_table_row().
+ &Apache::loncommon::end_data_table().'');
+ } else {
+ $r->print(' '.
+ &mt('A second grading pass was needed for user: [_1] with ID: [_2], because a mismatch was seen on the first pass.',$uname.':'.$udom,$scan_record->{'scantron.ID'}).' '.
+ &mt("As a consequence, this user's submission history records two tries.").
+ ' ');
+ }
+ }
+ }
if (&Apache::loncommon::connection_aborted($r)) { last; }
} continue {
&Apache::lonxml::clear_problem_counter();
- &Apache::lonnet::delenv('scantron\.');
+ &Apache::lonnet::delenv('scantron.');
}
&Apache::lonhtmlcommon::Close_PrgWin($r,\%prog_state);
+ &Apache::lonnet::remove_lock($lock);
# my $lasttime = &Time::HiRes::time()-$start;
# $r->print("
took $lasttime
");
@@ -7069,6 +7712,23 @@ SCANTRONFORM
return '';
}
+sub grade_student_bubbles {
+ my ($r,$uname,$udom,$scan_record,$scancode,@resources) = @_;
+ foreach my $resource (@resources) {
+ my %form = ('submitted' => 'scantron',
+ 'grade_target' => 'grade',
+ 'grade_username'=> $uname,
+ 'grade_domain' => $udom,
+ 'grade_courseid'=> $env{'request.course.id'},
+ 'grade_symb' => $resource->symb(),
+ 'CODE' => $scancode);
+ my $result=&ssi_with_retries($resource->src(),$ssi_retries,%form);
+ return 'ssi_error' if ($ssi_error);
+ last if (&Apache::loncommon::connection_aborted($r));
+ }
+ return;
+}
+
=pod
=item scantron_upload_scantron_data
@@ -7086,30 +7746,34 @@ sub scantron_upload_scantron_data {
my $domsel=&Apache::loncommon::select_dom_form($env{'request.role.domain'},
'domainid');
my $default_form_data=&defaultFormData(&get_symb($r,1));
- $r->print(<print('
-
-$default_form_data
+
+'.$default_form_data.'
-
$select_link
-
Course ID:
-
Course Name:
-
Domain:
$domsel
-
File to upload:
+
'.$select_link.'
+
'.&mt('Course ID:').'
+
+
'.&mt('Course Name:').'
+
+
'.&mt('Domain:').'
+
'.$domsel.'
+
'.&mt('File to upload:').'
+
-
-
+
+
-UPLOAD
+');
return '';
}
@@ -7128,12 +7792,12 @@ sub scantron_upload_scantron_data_save {
my $doanotherupload=
'
'."\n".
''."\n".
- ''."\n".
+ ''."\n".
'
'."\n";
if (!&Apache::lonnet::allowed('usc',$env{'form.domainid'}) &&
!&Apache::lonnet::allowed('usc',
$env{'form.domainid'}.'_'.$env{'form.courseid'})) {
- $r->print("You are not allowed to upload Scantron data to the requested course. ");
+ $r->print(&mt("You are not allowed to upload Scantron data to the requested course.")." ");
if ($symb) {
$r->print(&show_grading_menu_form($symb));
} else {
@@ -7142,7 +7806,7 @@ sub scantron_upload_scantron_data_save {
return '';
}
my %coursedata=&Apache::lonnet::coursedescription($env{'form.domainid'}.'_'.$env{'form.courseid'});
- $r->print("Doing upload to ".$coursedata{'description'}." ");
+ $r->print(&mt("Doing upload to [_1]",$coursedata{'description'})." ");
my $fname=$env{'form.upfile.filename'};
#FIXME
#copied from lonnet::userfileupload()
@@ -7160,13 +7824,18 @@ sub scantron_upload_scantron_data_save {
my $uploadedfile=$fname;
$fname='scantron_orig_'.$fname;
if (length($env{'form.upfile'}) < 2) {
- $r->print("Error: The file you attempted to upload, ".&HTML::Entities::encode($env{'form.upfile.filename'},'<>&"').", contained no information. Please check that you entered the correct filename.");
+ $r->print(&mt("Error: The file you attempted to upload, [_1] contained no information. Please check that you entered the correct filename.",''.&HTML::Entities::encode($env{'form.upfile.filename'},'<>&"').""));
} else {
my $result=&Apache::lonnet::finishuserfileupload($env{'form.courseid'},$env{'form.domainid'},'upfile',$fname);
if ($result =~ m|^/uploaded/|) {
- $r->print("Success: Successfully uploaded ".(length($env{'form.upfile'})-1)." bytes of data into location ".$result."");
+ $r->print(&mt("Success: Successfully uploaded [_1] bytes of data into location [_2]",
+ (length($env{'form.upfile'})-1),
+ ''.$result.""));
} else {
- $r->print("Error: An error (".$result.") occurred when attempting to upload the file, ".&HTML::Entities::encode($env{'form.upfile.filename'},'<>&"')."");
+ $r->print(&mt("Error: An error ([_1]) occurred when attempting to upload the file, [_2]",
+ $result,
+ ''.&HTML::Entities::encode($env{'form.upfile.filename'},'<>&"').""));
+
}
}
if ($symb) {
@@ -7210,11 +7879,11 @@ sub scantron_download_scantron_data {
my $cdom=$env{'course.'.$env{'request.course.id'}.'.domain'};
my $file=$env{'form.scantron_selectfile'};
if (! &valid_file($file)) {
- $r->print(<print('
- The requested file name was invalid.
+ '.&mt('The requested file name was invalid.').'
- Original file as uploaded by the scantron office.
+ '.&mt('[_1]Original[_2] file as uploaded by the scantron office.',
+ '','').'
- Corrections, a file of corrected records that were used in grading.
+ '.&mt('[_1]Corrections[_2], a file of corrected records that were used in grading.',
+ '','').'
- Skipped, a file of records that were skipped.
+ '.&mt('[_1]Skipped[_2], a file of records that were skipped.',
+ '','').'
-DOWNLOAD
+');
$r->print(&show_grading_menu_form(&get_symb($r,1)));
return '';
}
+sub checkscantron_results {
+ my ($r) = @_;
+ my ($symb)=&get_symb($r);
+ if (!$symb) {return '';}
+ my $grading_menu_button=&show_grading_menu_form($symb);
+ my $cid = $env{'request.course.id'};
+ my %lettdig = &letter_to_digits();
+ my $numletts = scalar(keys(%lettdig));
+ my $cnum = $env{'course.'.$cid.'.num'};
+ my $cdom = $env{'course.'.$cid.'.domain'};
+ my (undef, undef, $sequence) = &Apache::lonnet::decode_symb($env{'form.selectpage'});
+ my %record;
+ my %scantron_config =
+ &Apache::grades::get_scantron_config($env{'form.scantron_format'});
+ my ($scanlines,$scan_data)=&Apache::grades::scantron_getfile();
+ my $classlist=&Apache::loncoursedata::get_classlist();
+ my %idmap=&Apache::grades::username_to_idmap($classlist);
+ my $navmap=Apache::lonnavmaps::navmap->new();
+ my $map=$navmap->getResourceByUrl($sequence);
+ my @resources=$navmap->retrieveResources($map,undef,1,0);
+ my ($uname,$udom,%partids_by_symb);
+ foreach my $resource (@resources) {
+ my $ressymb = $resource->symb();
+ my ($analysis,$parts) =
+ &scantron_partids_tograde($resource,$env{'request.course.id'},$uname,$udom);
+ $partids_by_symb{$ressymb} = $parts;
+ }
+ my (%scandata,%lastname,%bylast);
+ $r->print('
+
'."\n");
+
+ my @delayqueue;
+ my %completedstudents;
+
+ my $count=&Apache::grades::get_todo_count($scanlines,$scan_data);
+ my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin($r,'Scantron/Submissions Comparison Status',
+ 'Progress of Scantron Data/Submission Records Comparison',$count,
+ 'inline',undef,'checkscantron');
+ my ($username,$domain,$started);
+
+ &Apache::grades::scantron_get_maxbubble(); # Need the bubble lines array to parse.
+
+ &Apache::lonhtmlcommon::Update_PrgWin($r,\%prog_state,
+ 'Processing first student');
+ my $start=&Time::HiRes::time();
+ my $i=-1;
+
+ while ($i<$scanlines->{'count'}) {
+ ($username,$domain,$uname)=('','','');
+ $i++;
+ my $line=&Apache::grades::scantron_get_line($scanlines,$scan_data,$i);
+ if ($line=~/^[\s\cz]*$/) { next; }
+ if ($started) {
+ &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,
+ 'last student');
+ }
+ $started=1;
+ my $scan_record=
+ &Apache::grades::scantron_parse_scanline($line,$i,\%scantron_config,
+ $scan_data);
+ unless ($uname=&Apache::grades::scantron_find_student($scan_record,$scan_data,
+ \%idmap,$i)) {
+ &Apache::grades::scantron_add_delay(\@delayqueue,$line,
+ 'Unable to find a student that matches',1);
+ next;
+ }
+ if (exists $completedstudents{$uname}) {
+ &Apache::grades::scantron_add_delay(\@delayqueue,$line,
+ 'Student '.$uname.' has multiple sheets',2);
+ next;
+ }
+ my $pid = $scan_record->{'scantron.ID'};
+ $lastname{$pid} = $scan_record->{'scantron.LastName'};
+ push(@{$bylast{$lastname{$pid}}},$pid);
+ my $lastpos = $env{'form.scantron_maxbubble'}*$scantron_config{'Qlength'};
+ $scandata{$pid} = substr($line,$scantron_config{'Qstart'}-1,$lastpos);
+ chomp($scandata{$pid});
+ $scandata{$pid} =~ s/\r$//;
+ ($username,$domain)=split(/:/,$uname);
+ my $counter = -1;
+ foreach my $resource (@resources) {
+ ($counter,my $recording) =
+ &verify_scantron_grading($resource,$domain,$username,$cid,$counter,
+ $scandata{$pid},\%partids_by_symb,
+ \%scantron_config,\%lettdig,$numletts);
+ $record{$pid} .= $recording;
+ }
+ }
+ &Apache::lonhtmlcommon::Close_PrgWin($r,\%prog_state);
+ $r->print(' ');
+ my ($okstudents,$badstudents,$numstudents,$passed,$failed);
+ $passed = 0;
+ $failed = 0;
+ $numstudents = 0;
+ foreach my $last (sort(keys(%bylast))) {
+ if (ref($bylast{$last}) eq 'ARRAY') {
+ foreach my $pid (sort(@{$bylast{$last}})) {
+ my $showscandata = $scandata{$pid};
+ my $showrecord = $record{$pid};
+ $showscandata =~ s/\s/ /g;
+ $showrecord =~ s/\s/ /g;
+ if ($scandata{$pid} eq $record{$pid}) {
+ my $css_class = ($passed % 2)?'LC_odd_row':'LC_even_row';
+ $okstudents .= '
'.&mt('Comparison of scantron data (including corrections) with corresponding submission records (most recent submission) for [quant,_1,student] ([_2] scantron lines/student).',$numstudents,$env{'form.scantron_maxbubble'}).'
');
+ $r->print('
'.&mt('Exact matches for [quant,_1,student].',$passed).' '.&mt('Discrepancies detected for [quant,_1,student].',$failed).'
');
+ if ($passed) {
+ $r->print(&mt('Students with exact correspondence between scantron data and submissions are as follows:').'
'.
+ &Apache::loncommon::end_data_table_header_row()."\n".
+ $okstudents."\n".
+ &Apache::loncommon::end_data_table().' ');
+ }
+ if ($failed) {
+ $r->print(&mt('Students with differences between scantron data and submissions are as follows:').'
'.
+ &Apache::loncommon::end_data_table_header_row()."\n".
+ $badstudents."\n".
+ &Apache::loncommon::end_data_table()).' '.
+ &mt('Differences can occur if submissions were modified using manual grading after a scantron grading pass.').' '.&mt('If unexpected discrepancies were detected, it is recommended that you inspect the original scantron sheets.');
+ }
+ $r->print('
'.$grading_menu_button);
+ return;
+}
+
+sub verify_scantron_grading {
+ my ($resource,$domain,$username,$cid,$counter,$scandata,$partids_by_symb,
+ $scantron_config,$lettdig,$numletts) = @_;
+ my ($record,%expected,%startpos);
+ return ($counter,$record) if (!ref($resource));
+ return ($counter,$record) if (!$resource->is_problem());
+ my $symb = $resource->symb();
+ return ($counter,$record) if (ref($partids_by_symb) ne 'HASH');
+ return ($counter,$record) if (ref($partids_by_symb->{$symb}) ne 'ARRAY');
+ foreach my $part_id (@{$partids_by_symb->{$symb}}) {
+ $counter ++;
+ $expected{$part_id} = 0;
+ if ($env{"form.scantron.sub_bubblelines.$counter"}) {
+ my @sub_lines = split(/,/,$env{"form.scantron.sub_bubblelines.$counter"});
+ foreach my $item (@sub_lines) {
+ $expected{$part_id} += $item;
+ }
+ } else {
+ $expected{$part_id} = $env{"form.scantron.bubblelines.$counter"};
+ }
+ $startpos{$part_id} = $env{"form.scantron.first_bubble_line.$counter"};
+ }
+ if ($symb) {
+ my %recorded;
+ my (%returnhash) = &Apache::lonnet::restore($symb,$cid,$domain,$username);
+ if ($returnhash{'version'}) {
+ my %lasthash=();
+ my $version;
+ for ($version=1;$version<=$returnhash{'version'};$version++) {
+ foreach my $key (sort(split(/\:/,$returnhash{$version.':keys'}))) {
+ $lasthash{$key}=$returnhash{$version.':'.$key};
+ }
+ }
+ foreach my $key (keys(%lasthash)) {
+ if ($key =~ /\.scantron$/) {
+ my $value = &unescape($lasthash{$key});
+ my ($part_id) = ($key =~ /^resource\.(.+)\.scantron$/);
+ if ($value eq '') {
+ for (my $i=0; $i<$expected{$part_id}; $i++) {
+ for (my $j=0; $j<$scantron_config->{'length'}; $j++) {
+ $recorded{$part_id} .= $scantron_config->{'Qoff'};
+ }
+ }
+ } else {
+ my @tocheck;
+ my @items = split(//,$value);
+ if (($scantron_config->{'Qon'} eq 'letter') ||
+ ($scantron_config->{'Qon'} eq 'number')) {
+ if (@items < $expected{$part_id}) {
+ my $fragment = substr($scandata,$startpos{$part_id},$expected{$part_id});
+ my @singles = split(//,$fragment);
+ foreach my $pos (@singles) {
+ if ($pos eq ' ') {
+ push(@tocheck,$pos);
+ } else {
+ my $next = shift(@items);
+ push(@tocheck,$next);
+ }
+ }
+ } else {
+ @tocheck = @items;
+ }
+ foreach my $letter (@tocheck) {
+ if ($scantron_config->{'Qon'} eq 'letter') {
+ if ($letter !~ /^[A-J]$/) {
+ $letter = $scantron_config->{'Qoff'};
+ }
+ $recorded{$part_id} .= $letter;
+ } elsif ($scantron_config->{'Qon'} eq 'number') {
+ my $digit;
+ if ($letter !~ /^[A-J]$/) {
+ $digit = $scantron_config->{'Qoff'};
+ } else {
+ $digit = $lettdig->{$letter};
+ }
+ $recorded{$part_id} .= $digit;
+ }
+ }
+ } else {
+ @tocheck = @items;
+ for (my $i=0; $i<$expected{$part_id}; $i++) {
+ my $curr_sub = shift(@tocheck);
+ my $digit;
+ if ($curr_sub =~ /^[A-J]$/) {
+ $digit = $lettdig->{$curr_sub}-1;
+ }
+ if ($curr_sub eq 'J') {
+ $digit += scalar($numletts);
+ }
+ for (my $j=0; $j<$scantron_config->{'Qlength'}; $j++) {
+ if ($j == $digit) {
+ $recorded{$part_id} .= $scantron_config->{'Qon'};
+ } else {
+ $recorded{$part_id} .= $scantron_config->{'Qoff'};
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ foreach my $part_id (@{$partids_by_symb->{$symb}}) {
+ if ($recorded{$part_id} eq '') {
+ for (my $i=0; $i<$expected{$part_id}; $i++) {
+ for (my $j=0; $j<$scantron_config->{'Qlength'}; $j++) {
+ $recorded{$part_id} .= $scantron_config->{'Qoff'};
+ }
+ }
+ }
+ $record .= $recorded{$part_id};
+ }
+ }
+ return ($counter,$record);
+}
+
+sub letter_to_digits {
+ my %lettdig = (
+ A => 1,
+ B => 2,
+ C => 3,
+ D => 4,
+ E => 5,
+ F => 6,
+ G => 7,
+ H => 8,
+ I => 9,
+ J => 0,
+ );
+ return %lettdig;
+}
+
=pod
=back
@@ -7298,25 +8249,25 @@ sub grading_menu {
});
$fields{'command'} = 'csvform';
$url = &Apache::lonhtmlcommon::build_url('grades/',\%fields);
- push (@menu, { url => $url,
+ push(@menu, { url => $url,
name => &mt('Upload Scores'),
short_description =>
&mt('Specify a file containing the class scores for current resource.')});
$fields{'command'} = 'processclicker';
$url = &Apache::lonhtmlcommon::build_url('grades/',\%fields);
- push (@menu, { url => $url,
+ push(@menu, { url => $url,
name => &mt('Process Clicker'),
short_description =>
&mt('Specify a file containing the clicker information for this resource.')});
$fields{'command'} = 'scantron_selectphase';
$url = &Apache::lonhtmlcommon::build_url('grades/',\%fields);
- push (@menu, { url => $url,
- name => &mt('Grade/Manage Scantron Forms'),
+ push(@menu, { url => $url,
+ name => &mt('Grade/Manage/Review Scantron Forms'),
short_description =>
- &mt('')});
+ &mt('Grade scantron exams, upload/download scantron data files, and review previously graded scantron exams.')});
$fields{'command'} = 'verify';
$url = &Apache::lonhtmlcommon::build_url('grades/',\%fields);
- push (@menu, { url => "",
+ push(@menu, { url => "",
name => &mt('Verify Receipt'),
short_description =>
&mt('')});
@@ -7341,18 +8292,18 @@ sub grading_menu {
$menudata->{'url'}.'" >'.
$menudata->{'name'}."\n";
} else {
- $Str .='
';
- $Str .= (' 'x8).
- ' receipt: '.&Apache::lonnet::recprefix($env{'request.course.id'}).
+ ' /> '.
+ &Apache::lonnet::recprefix($env{'request.course.id'}).
'-';
}
$Str .= ' '.(' 'x8).$menudata->{'short_description'}.
"\n";
}
$Str .="\n";
+ my $receiptalert = &mt("Please enter a receipt number given by a student in the receipt box.");
$request->print(<
function checkChoice(formname,val,cmdx) {
@@ -7380,7 +8331,7 @@ sub grading_menu {
if (nospace == "OK" && isNaN(receiptNo)) {checkOpt = true;}
if (nospace == "notOK" && (isNaN(receiptNo) || receiptNo == "")) {checkOpt = true;}
if (checkOpt) {
- alert("Please enter a receipt number given by a student in the receipt box.");
+ alert("$receiptalert$receiptalert");
formname.receipt.value = "";
formname.receipt.focus();
return false;
@@ -7401,6 +8352,7 @@ sub submit_options {
if (!$symb) {return '';}
my $probTitle = &Apache::lonnet::gettitle($symb);
+ my $receiptalert = &mt("Please enter a receipt number given by a student in the receipt box.");
$request->print(<
function checkChoice(formname,val,cmdx) {
@@ -7428,7 +8380,7 @@ sub submit_options {
if (nospace == "OK" && isNaN(receiptNo)) {checkOpt = true;}
if (nospace == "notOK" && (isNaN(receiptNo) || receiptNo == "")) {checkOpt = true;}
if (checkOpt) {
- alert("Please enter a receipt number given by a student in the receipt box.");
+ alert("$receiptalert");
formname.receipt.value = "";
formname.receipt.focus();
return false;
@@ -7473,7 +8425,7 @@ GRADINGMENUJS
'."\n";
if (ref($sections)) {
- foreach my $section (sort (@$sections)) {
+ foreach my $section (sort(@$sections)) {
$result.=''."\n";
}
@@ -7528,7 +8480,7 @@ GRADINGMENUJS
'."\n";
- $result.=' '.&mt('Specify a file containing the clicker information for this resource').
+ $result.=' '.&mt('Specify a file containing the clicker information for this resource.').
'.
'."\n";
$result.='
'."\n";
# Attempt to restore parameters from last session, set defaults if not present
@@ -7663,7 +8616,7 @@ sub process_clicker {
if (!$env{'form.upfiletype'}) { $env{'form.upfiletype'}='iclicker'; }
my %checked;
- foreach my $gradingmechanism ('attendance','personnel','specific') {
+ foreach my $gradingmechanism ('attendance','personnel','specific','given') {
if ($env{'form.gradingmechanism'} eq $gradingmechanism) {
$checked{$gradingmechanism}="checked='checked'";
}
@@ -7674,6 +8627,8 @@ sub process_clicker {
my $attendance=&mt("Award points just for participation");
my $personnel=&mt("Correctness determined from response by course personnel");
my $specific=&mt("Correctness determined from response with clicker ID(s)");
+ my $given=&mt("Correctness determined from given list of answers").' '.
+ '('.&mt("Provide comma-separated list. Use '*' for any answer correct, '-' for skip").')';
my $pcorrect=&mt("Percentage points for correct solution");
my $pincorrect=&mt("Percentage points for incorrect solution");
my $selectform=&Apache::loncommon::select_form($env{'form.upfiletype'},'upfiletype',
@@ -7731,6 +8686,9 @@ function sanitycheck() {
$personnel $specific
+ $given
+
+
$pcorrect: $pincorrect:
@@ -7757,6 +8715,19 @@ sub process_clicker_file {
$result.=''.&mt('You need to specify a clicker ID for the correct answer').'';
return $result.&show_grading_menu_form($symb);
}
+ if (($env{'form.gradingmechanism'} eq 'given') && ($env{'form.givenanswer'}!~/\S/)) {
+ $result.=''.&mt('You need to specify the correct answer').'';
+ return $result.&show_grading_menu_form($symb);
+ }
+ my $foundgiven=0;
+ if ($env{'form.gradingmechanism'} eq 'given') {
+ $env{'form.givenanswer'}=~s/^\s*//gs;
+ $env{'form.givenanswer'}=~s/\s*$//gs;
+ $env{'form.givenanswer'}=~s/[^a-zA-Z0-9\.\*\-]+/\,/g;
+ $env{'form.givenanswer'}=uc($env{'form.givenanswer'});
+ my @answers=split(/\,/,$env{'form.givenanswer'});
+ $foundgiven=$#answers+1;
+ }
my %clicker_ids=&gather_clicker_ids();
my %correct_ids;
if ($env{'form.gradingmechanism'} eq 'personnel') {
@@ -7775,6 +8746,8 @@ sub process_clicker_file {
}
if ($env{'form.gradingmechanism'} eq 'attendance') {
$result.=&mt('Score based on attendance only');
+ } elsif ($env{'form.gradingmechanism'} eq 'given') {
+ $result.=&mt('Score based on [_1] ([_2] answers)',''.$env{'form.givenanswer'}.'',$foundgiven);
} else {
my $number=0;
$result.='
'.&mt('Correctness determined by the following IDs').'';
@@ -7820,6 +8793,9 @@ sub process_clicker_file {
ENDHEADER
+ if ($env{'form.gradingmechanism'} eq 'given') {
+ $result.='';
+ }
my %responses;
my @questiontitles;
my $errormsg='';
@@ -7832,11 +8808,13 @@ ENDHEADER
}
$result.=' '.&mt('Found [_1] question(s)',$number).' '.
''.
- &mt('Awarding [_1] percent for corrion(s)',$number).' '.
- ''.
&mt('Awarding [_1] percent for correct and [_2] percent for incorrect responses',
$env{'form.pcorrect'},$env{'form.pincorrect'}).
' ';
+ if (($env{'form.gradingmechanism'} eq 'given') && ($number!=$foundgiven)) {
+ $result.=''.&mt('Number of given answers does not agree with number of questions in file.').'';
+ return $result.&show_grading_menu_form($symb);
+ }
# Remember Question Titles
# FIXME: Possibly need delimiter other than ":"
for (my $i=0;$i<$number;$i++) {
@@ -7880,7 +8858,7 @@ ENDHEADER
}
$result.='
'.
&mt('Found [_1] registered and [_2] unregistered clickers.',$student_count,$unknown_count);
- if ($env{'form.gradingmechanism'} ne 'attendance') {
+ if (($env{'form.gradingmechanism'} ne 'attendance') && ($env{'form.gradingmechanism'} ne 'given')) {
if ($correct_count==0) {
$errormsg.="Found no correct answers answers for grading!";
} elsif ($correct_count>1) {
@@ -7951,7 +8929,7 @@ sub interwrite_eval {
$id=~s/[\-\:]//g;
$idresponses{$id}[$number]=$entries[6];
}
- foreach my $id (keys %idresponses) {
+ foreach my $id (keys(%idresponses)) {
$$responses{$id}=join(',',@{$idresponses{$id}});
$$responses{$id}=~s/^\s*\,//;
}
@@ -8025,10 +9003,15 @@ ENDHEADER
if ($user) {
my @answer=split(/\,/,$env{$key});
my $sum=0;
+ my $realnumber=$number;
for (my $i=0;$i<$number;$i++) {
if ($answer[$i]) {
if ($gradingmechanism eq 'attendance') {
$sum+=$pcorrect;
+ } elsif ($answer[$i] eq '*') {
+ $sum+=$pcorrect;
+ } elsif ($answer[$i] eq '-') {
+ $realnumber--;
} else {
if ($answer[$i] eq $correct[$i]) {
$sum+=$pcorrect;
@@ -8038,7 +9021,7 @@ ENDHEADER
}
}
}
- my $ave=$sum/(100*$number);
+ my $ave=$sum/(100*$realnumber);
# Store
my ($username,$domain)=split(/\:/,$user);
my %grades=();
@@ -8056,7 +9039,7 @@ ENDHEADER
}
}
# We are done
- $result.=' '.&mt('Successfully stored grades for [_1] student(s).',$storecount).
+ $result.=' '.&mt('Successfully stored grades for [quant,_1,student].',$storecount).
'