--- loncom/homework/grades.pm 2013/06/16 16:46:48 1.690
+++ loncom/homework/grades.pm 2013/06/16 16:59:29 1.691
@@ -1,7 +1,7 @@
# The LearningOnline Network with CAPA
# The LON-CAPA Grading handler
#
-# $Id: grades.pm,v 1.690 2013/06/16 16:46:48 raeburn Exp $
+# $Id: grades.pm,v 1.691 2013/06/16 16:59:29 raeburn Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -5142,6 +5142,11 @@ my %subdivided_bubble_lines; # no.
my %responsetype_per_response; # responsetype for each response
+my %masterseq_id_responsenum; # src_id (e.g., 12.3_0.11 etc.) for each
+ # numbered response. Needed when randomorder
+ # or randompick are in use. Key is ID, value
+ # is response number.
+
# Save and restore the bubble lines array to the form env.
@@ -5155,12 +5160,17 @@ sub save_bubble_lines {
$env{"form.scantron.responsetype.$line"} =
$responsetype_per_response{$line};
}
+ foreach my $resid (keys(%masterseq_id_responsenum)) {
+ my $line = $masterseq_id_responsenum{$resid};
+ $env{"form.scantron.residpart.$line"} = $resid;
+ }
}
sub restore_bubble_lines {
my $line = 0;
%bubble_lines_per_response = ();
+ %masterseq_id_responsenum = ();
while ($env{"form.scantron.bubblelines.$line"}) {
my $value = $env{"form.scantron.bubblelines.$line"};
$bubble_lines_per_response{$line} = $value;
@@ -5170,6 +5180,8 @@ sub restore_bubble_lines {
$env{"form.scantron.sub_bubblelines.$line"};
$responsetype_per_response{$line} =
$env{"form.scantron.responsetype.$line"};
+ my $id = $env{"form.scantron.residpart.$line"};
+ $masterseq_id_responsenum{$id} = $line;
$line++;
}
}
@@ -5834,6 +5846,27 @@ sub digits_to_letters {
(see scantron_getfile for more information)
just_header - True if should not process question answers but only
the stuff to the left of the answers.
+ randomorder - True if randomorder in use
+ randompick - True if randompick in use
+ sequence - Exam folder URL
+ master_seq - Ref to array containing symbs in exam folder
+ symb_to_resource - Ref to hash of symbs for resources in exam folder
+ (corresponding values are resource objects)
+ partids_by_symb - Ref to hash of symb -> array ref of partIDs
+ orderedforcode - Ref to hash of arrays. keys are CODEs and values
+ are refs to an array of resource objects, ordered
+ according to order used for CODE, when randomorder
+ and or randompick are in use.
+ respnumlookup - Ref to hash mapping question numbers in bubble lines
+ for current line to question number used for same question
+ in "Master Sequence" (as seen by Course Coordinator).
+ startline - Ref to hash where key is question number (0 is first)
+ and value is number of first bubble line for current
+ student or code-based randompick and/or randomorder.
+ totalref - Ref of scalar used to score total number of bubble
+ lines needed for responses in a scan line (used when
+ randompick in use.
+
Returns:
Hash containing the result of parsing the scanline
@@ -5878,12 +5911,12 @@ sub digits_to_letters {
=cut
sub scantron_parse_scanline {
- my ($line,$whichline,$scantron_config,$scan_data,$just_header)=@_;
+ my ($line,$whichline,$scantron_config,$scan_data,$just_header,$idmap,
+ $randomorder,$randompick,$sequence,$master_seq,$symb_to_resource,
+ $partids_by_symb,$orderedforcode,$respnumlookup,$startline,$totalref)=@_;
my %record;
- my $lastpos = $env{'form.scantron_maxbubble'}*$$scantron_config{'Qlength'};
- my $questions=substr($line,$$scantron_config{'Qstart'}-1,$lastpos); # Answers
- my $data=substr($line,0,$$scantron_config{'Qstart'}-1); # earlier stuff
+ my $data=substr($line,0,$$scantron_config{'Qstart'}-1); # stuff before answers
if (!($$scantron_config{'CODElocation'} eq 0 ||
$$scantron_config{'CODElocation'} eq 'none')) {
if ($$scantron_config{'CODElocation'} < 0 ||
@@ -5919,10 +5952,29 @@ sub scantron_parse_scanline {
my $questnum=0;
my $ansnum =1; # Multiple 'answer lines'/question.
+ my $lastpos = $env{'form.scantron_maxbubble'}*$$scantron_config{'Qlength'};
+ if ($randompick || $randomorder) {
+ my $total = &get_respnum_lookups($sequence,$scan_data,$idmap,$line,\%record,
+ $master_seq,$symb_to_resource,
+ $partids_by_symb,$orderedforcode,
+ $respnumlookup,$startline);
+ if ($total) {
+ $lastpos = $total*$$scantron_config{'Qlength'};
+ }
+ if (ref($totalref)) {
+ $$totalref = $total;
+ }
+ }
+ my $questions=substr($line,$$scantron_config{'Qstart'}-1,$lastpos); # Answers
chomp($questions); # Get rid of any trailing \n.
$questions =~ s/\r$//; # Get rid of trailing \r too (MAC or Win uploads).
while (length($questions)) {
- my $answers_needed = $bubble_lines_per_response{$questnum};
+ my $answers_needed;
+ if (($randompick || $randomorder) && (ref($respnumlookup) eq 'HASH')) {
+ $answers_needed = $bubble_lines_per_response{$respnumlookup->{$questnum}};
+ } else {
+ $answers_needed = $bubble_lines_per_response{$questnum};
+ }
my $answer_length = ($$scantron_config{'Qlength'} * $answers_needed)
|| 1;
$questnum++;
@@ -5931,11 +5983,16 @@ sub scantron_parse_scanline {
$questions = substr($questions,$answer_length);
if (length($currentquest) < $answer_length) { next; }
- if ($subdivided_bubble_lines{$questnum-1} =~ /,/) {
+ my $subdivided;
+ if (($randompick || $randomorder) && (ref($respnumlookup) eq 'HASH')) {
+ $subdivided = $subdivided_bubble_lines{$respnumlookup->{$questnum-1}};
+ } else {
+ $subdivided = $subdivided_bubble_lines{$questnum-1};
+ }
+ if ($subdivided =~ /,/) {
my $subquestnum = 1;
my $subquestions = $currentquest;
- my @subanswers_needed =
- split(/,/,$subdivided_bubble_lines{$questnum-1});
+ my @subanswers_needed = split(/,/,$subdivided);
foreach my $subans (@subanswers_needed) {
my $subans_length =
($$scantron_config{'Qlength'} * $subans) || 1;
@@ -5946,10 +6003,13 @@ sub scantron_parse_scanline {
($$scantron_config{'Qon'} eq 'number')) {
$ansnum = &scantron_validator_lettnum($ansnum,
$questnum,$quest_id,$subans,$currsubquest,$whichline,
- \@alphabet,\%record,$scantron_config,$scan_data);
+ \@alphabet,\%record,$scantron_config,$scan_data,
+ $randomorder,$randompick,$respnumlookup);
} else {
$ansnum = &scantron_validator_positional($ansnum,
- $questnum,$quest_id,$subans,$currsubquest,$whichline, \@alphabet,\%record,$scantron_config,$scan_data);
+ $questnum,$quest_id,$subans,$currsubquest,$whichline,
+ \@alphabet,\%record,$scantron_config,$scan_data,
+ $randomorder,$randompick,$respnumlookup);
}
$subquestnum ++;
}
@@ -5958,11 +6018,13 @@ sub scantron_parse_scanline {
($$scantron_config{'Qon'} eq 'number')) {
$ansnum = &scantron_validator_lettnum($ansnum,$questnum,
$quest_id,$answers_needed,$currentquest,$whichline,
- \@alphabet,\%record,$scantron_config,$scan_data);
+ \@alphabet,\%record,$scantron_config,$scan_data,
+ $randomorder,$randompick,$respnumlookup);
} else {
$ansnum = &scantron_validator_positional($ansnum,$questnum,
$quest_id,$answers_needed,$currentquest,$whichline,
- \@alphabet,\%record,$scantron_config,$scan_data);
+ \@alphabet,\%record,$scantron_config,$scan_data,
+ $randomorder,$randompick,$respnumlookup);
}
}
}
@@ -5970,9 +6032,66 @@ sub scantron_parse_scanline {
return \%record;
}
+sub get_master_seq {
+ my ($resources,$master_seq,$symb_to_resource) = @_;
+ return unless ((ref($resources) eq 'ARRAY') && (ref($master_seq) eq 'ARRAY') &&
+ (ref($symb_to_resource) eq 'HASH'));
+ my $resource_error;
+ foreach my $resource (@{$resources}) {
+ my $ressymb;
+ if (ref($resource)) {
+ $ressymb = $resource->symb();
+ push(@{$master_seq},$ressymb);
+ $symb_to_resource->{$ressymb} = $resource;
+ } else {
+ $resource_error = 1;
+ last;
+ }
+ }
+ return $resource_error;
+}
+
+sub get_respnum_lookups {
+ my ($sequence,$scan_data,$idmap,$line,$record,$master_seq,$symb_to_resource,
+ $partids_by_symb,$orderedforcode,$respnumlookup,$startline) = @_;
+ return unless ((ref($record) eq 'HASH') && (ref($master_seq) eq 'ARRAY') &&
+ (ref($symb_to_resource) eq 'HASH') && (ref($partids_by_symb) eq 'HASH') &&
+ (ref($orderedforcode) eq 'HASH') && (ref($respnumlookup) eq 'HASH') &&
+ (ref($startline) eq 'HASH'));
+ my ($user,$scancode);
+ if ((exists($record->{'scantron.CODE'})) &&
+ (&Apache::lonnet::validCODE($record->{'scantron.CODE'}))) {
+ $scancode = $record->{'scantron.CODE'};
+ } else {
+ $user = &scantron_find_student($record,$scan_data,$idmap,$line);
+ }
+ my @mapresources =
+ &users_order($user,$scancode,$sequence,$master_seq,$symb_to_resource,
+ $orderedforcode);
+ my $total = 0;
+ my $count = 0;
+ foreach my $resource (@mapresources) {
+ my $id = $resource->id();
+ my $symb = $resource->symb();
+ if (ref($partids_by_symb->{$symb}) eq 'ARRAY') {
+ foreach my $partid (@{$partids_by_symb->{$symb}}) {
+ my $respnum = $masterseq_id_responsenum{$id.'_'.$partid};
+ if ($respnum ne '') {
+ $respnumlookup->{$count} = $respnum;
+ $startline->{$count} = $total;
+ $total += $bubble_lines_per_response{$respnum};
+ $count ++;
+ }
+ }
+ }
+ }
+ return $total;
+}
+
sub scantron_validator_lettnum {
my ($ansnum,$questnum,$quest_id,$answers_needed,$currquest,$whichline,
- $alphabet,$record,$scantron_config,$scan_data) = @_;
+ $alphabet,$record,$scantron_config,$scan_data,$randomorder,
+ $randompick,$respnumlookup) = @_;
# Qon 'letter' implies for each slot in currquest we have:
# ? or * for doubles, a letter in A-Z for a bubble, and
@@ -5991,19 +6110,23 @@ sub scantron_validator_lettnum {
$matchon = '\d';
}
my $occurrences = 0;
- if (($responsetype_per_response{$questnum-1} eq 'essayresponse') ||
- ($responsetype_per_response{$questnum-1} eq 'formularesponse') ||
- ($responsetype_per_response{$questnum-1} eq 'stringresponse') ||
- ($responsetype_per_response{$questnum-1} eq 'imageresponse') ||
- ($responsetype_per_response{$questnum-1} eq 'reactionresponse') ||
- ($responsetype_per_response{$questnum-1} eq 'organicresponse')) {
+ my $responsenum = $questnum-1;
+ if (($randompick || $randomorder) && (ref($respnumlookup) eq 'HASH')) {
+ $responsenum = $respnumlookup->{$questnum-1}
+ }
+ if (($responsetype_per_response{$responsenum} eq 'essayresponse') ||
+ ($responsetype_per_response{$responsenum} eq 'formularesponse') ||
+ ($responsetype_per_response{$responsenum} eq 'stringresponse') ||
+ ($responsetype_per_response{$responsenum} eq 'imageresponse') ||
+ ($responsetype_per_response{$responsenum} eq 'reactionresponse') ||
+ ($responsetype_per_response{$responsenum} eq 'organicresponse')) {
my @singlelines = split('',$currquest);
foreach my $entry (@singlelines) {
$occurrences = &occurence_count($entry,$matchon);
if ($occurrences > 1) {
last;
}
- }
+ }
} else {
$occurrences = &occurence_count($currquest,$matchon);
}
@@ -6051,7 +6174,8 @@ sub scantron_validator_lettnum {
sub scantron_validator_positional {
my ($ansnum,$questnum,$quest_id,$answers_needed,$currquest,
- $whichline,$alphabet,$record,$scantron_config,$scan_data) = @_;
+ $whichline,$alphabet,$record,$scantron_config,$scan_data,
+ $randomorder,$randompick,$respnumlookup) = @_;
# Otherwise there's a positional notation;
# each bubble line requires Qlength items, and there are filled in
@@ -6093,12 +6217,16 @@ sub scantron_validator_positional {
# record all the bubbles filled in as well as the
# fact this response consists of multiple bubbles.
#
- if (($responsetype_per_response{$questnum-1} eq 'essayresponse') ||
- ($responsetype_per_response{$questnum-1} eq 'formularesponse') ||
- ($responsetype_per_response{$questnum-1} eq 'stringresponse') ||
- ($responsetype_per_response{$questnum-1} eq 'imageresponse') ||
- ($responsetype_per_response{$questnum-1} eq 'reactionresponse') ||
- ($responsetype_per_response{$questnum-1} eq 'organicresponse')) {
+ my $responsenum = $questnum-1;
+ if (($randompick || $randomorder) && (ref($respnumlookup) eq 'HASH')) {
+ $responsenum = $respnumlookup->{$questnum-1}
+ }
+ if (($responsetype_per_response{$responsenum} eq 'essayresponse') ||
+ ($responsetype_per_response{$responsenum} eq 'formularesponse') ||
+ ($responsetype_per_response{$responsenum} eq 'stringresponse') ||
+ ($responsetype_per_response{$responsenum} eq 'imageresponse') ||
+ ($responsetype_per_response{$responsenum} eq 'reactionresponse') ||
+ ($responsetype_per_response{$responsenum} eq 'organicresponse')) {
my $doubleerror = 0;
while (($currquest >= $$scantron_config{'Qlength'}) &&
(!$doubleerror)) {
@@ -6503,9 +6631,11 @@ SCANTRONFORM
''."\n";
$chunk .=
''."\n";
+ $chunk .=
+ ''."\n";
$result .= $chunk;
$line++;
- }
+ }
return $result;
}
@@ -6577,6 +6707,7 @@ sub scantron_validate_file {
while (!$stop && $currentphase < scalar(@validate_phases)) {
$r->print(&mt('Validating '.$validate_phases[$currentphase]).'
');
$r->rflush();
+
my $which="scantron_validate_".$validate_phases[$currentphase];
{
no strict 'refs';
@@ -7072,7 +7203,8 @@ sub scantron_validate_ID {
sub scantron_get_correction {
- my ($r,$i,$scan_record,$scan_config,$line,$error,$arg)=@_;
+ my ($r,$i,$scan_record,$scan_config,$line,$error,$arg,
+ $randomorder,$randompick,$respnumlookup,$startline)=@_;
#FIXME in the case of a duplicated ID the previous line, probably need
#to show both the current line and the previous one and allow skipping
#the previous one or the current one
@@ -7206,7 +7338,8 @@ ENDSCRIPT
# The form field scantron_questions is acutally a list of line numbers.
# represented by this form so:
- my $line_list = &questions_to_line_list($arg);
+ my $line_list = &questions_to_line_list($arg,$randomorder,$randompick,
+ $respnumlookup,$startline);
$r->print('');
@@ -7214,7 +7347,9 @@ ENDSCRIPT
$r->print("
".&mt("Please indicate which bubble should be used for grading")."
"); foreach my $question (@{$arg}) { my @linenums = &prompt_for_corrections($r,$question,$scan_config, - $scan_record, $error); + $scan_record, $error, + $randomorder,$randompick, + $respnumlookup,$startline); push(@lines_to_correct,@linenums); } $r->print(&verify_bubbles_checked(@lines_to_correct)); @@ -7227,14 +7362,17 @@ ENDSCRIPT # The form field scantron_questions is actually a list of line numbers not # a list of question numbers. Therefore: # - - my $line_list = &questions_to_line_list($arg); + + my $line_list = &questions_to_line_list($arg,$randomorder,$randompick, + $respnumlookup,$startline); $r->print(''); foreach my $question (@{$arg}) { my @linenums = &prompt_for_corrections($r,$question,$scan_config, - $scan_record, $error); + $scan_record, $error, + $randomorder,$randompick, + $respnumlookup,$startline); push(@lines_to_correct,@linenums); } $r->print(&verify_bubbles_checked(@lines_to_correct)); @@ -7285,12 +7423,19 @@ used to fill in the scantron_questions f Arguments: questions - Reference to an array of questions. - + randomorder - True if randomorder in use. + randompick - True if randompick in use. + respnumlookup - Reference to HASH mapping question numbers in bubble lines + for current line to question number used for same question + in "Master Seqence" (as seen by Course Coordinator). + startline - Reference to hash where key is question number (0 is first) + and key is number of first bubble line for current student + or code-based randompick and/or randomorder. =cut sub questions_to_line_list { - my ($questions) = @_; + my ($questions,$randomorder,$randompick,$respnumlookup,$startline) = @_; my @lines; foreach my $item (@{$questions}) { @@ -7299,8 +7444,16 @@ sub questions_to_line_list { if ($item =~ /^(\d+)\.(\d+)$/) { $question = $1; my $subquestion = $2; - $first = $first_bubble_line{$question-1} + 1; - my @subans = split(/,/,$subdivided_bubble_lines{$question-1}); + my $responsenum = $question-1; + if (($randomorder || $randompick) && (ref($respnumlookup) eq 'HASH')) { + $responsenum = $respnumlookup->{$question-1}; + if (ref($startline) eq 'HASH') { + $first = $startline->{$question-1} + 1; + } + } else { + $first = $first_bubble_line{$responsenum} + 1; + } + my @subans = split(/,/,$subdivided_bubble_lines{$responsenum}); my $subcount = 1; while ($subcount<$subquestion) { $first += $subans[$subcount-1]; @@ -7308,8 +7461,16 @@ sub questions_to_line_list { } $count = $subans[$subquestion-1]; } else { - $first = $first_bubble_line{$question-1} + 1; - $count = $bubble_lines_per_response{$question-1}; + my $responsenum = $question-1; + if (($randomorder || $randompick) && (ref($respnumlookup) eq 'HASH')) { + $responsenum = $respnumlookup->{$question-1}; + if (ref($startline) eq 'HASH') { + $first = $startline->{$question-1} + 1; + } + } else { + $first = $first_bubble_line{$responsenum} + 1; + } + $count = $bubble_lines_per_response{$responsenum}; } $last = $first+$count-1; push(@lines, ($first..$last)); @@ -7331,6 +7492,15 @@ for multi and missing bubble cases). $scan_config - The scantron file configuration hash. $scan_record - Reference to the hash that has the the parsed scanlines. $error - Type of error + $randomorder - True if randomorder in use. + $randompick - True if randompick in use. + $respnumlookup - Reference to HASH mapping question numbers in bubble lines + for current line to question number used for same question + in "Master Seqence" (as seen by Course Coordinator). + $startline - Reference to hash where key is question number (0 is first) + and value is number of first bubble line for current student + or code-based randompick and/or randomorder. + Implicit inputs: %bubble_lines_per_response - Starting line numbers for each question. @@ -7355,15 +7525,26 @@ for multi and missing bubble cases). =cut sub prompt_for_corrections { - my ($r, $question, $scan_config, $scan_record, $error) = @_; + my ($r, $question, $scan_config, $scan_record, $error, $randomorder, + $randompick, $respnumlookup, $startline) = @_; my ($current_line,$lines); my @linenums; my $questionnum = $question; + my ($first,$responsenum); if ($question =~ /^(\d+)\.(\d+)$/) { $question = $1; - $current_line = $first_bubble_line{$question-1} + 1 ; my $subquestion = $2; - my @subans = split(/,/,$subdivided_bubble_lines{$question-1}); + if (($randomorder || $randompick) && (ref($respnumlookup) eq 'HASH')) { + $responsenum = $respnumlookup->{$question-1}; + if (ref($startline) eq 'HASH') { + $first = $startline->{$question-1}; + } + } else { + $responsenum = $question-1; + $first = $first_bubble_line{$responsenum} + 1; + } + $current_line = $first + 1 ; + my @subans = split(/,/,$subdivided_bubble_lines{$responsenum}); my $subcount = 1; while ($subcount<$subquestion) { $current_line += $subans[$subcount-1]; @@ -7371,17 +7552,26 @@ sub prompt_for_corrections { } $lines = $subans[$subquestion-1]; } else { - $current_line = $first_bubble_line{$question-1} + 1 ; - $lines = $bubble_lines_per_response{$question-1}; + if (($randomorder || $randompick) && (ref($respnumlookup) eq 'HASH')) { + $responsenum = $respnumlookup->{$question-1}; + if (ref($startline) eq 'HASH') { + $first = $startline->{$question-1}; + } + } else { + $responsenum = $question-1; + $first = $first_bubble_line{$responsenum}; + } + $current_line = $first + 1; + $lines = $bubble_lines_per_response{$responsenum}; } if ($lines > 1) { $r->print(&mt('The group of bubble lines below responds to a single question.').'