Annotation of loncom/html/adm/help/tex/Clicker_Registration.tex, revision 1.10
1.4 albertel 1: \label{Clicker_Registration}
1.6 riegler 2:
3:
4:
5: LON-CAPA users can register their clickers within LON-CAPA.
6: To register your clicker, do the following:
7:
8: \begin{enumerate}
9:
1.9 raeburn 10: \item Either select \textbf{Preferences} from the dropdown list displayed
11: when you mouseover your name at the top left of the screen or
12: click \textbf{Main Menu} on the Inline Menu and
13: then select \includegraphics[width=0.03\paperwidth]{pref} \textbf{Set user preferences}
14: in the \textbf{My Space} group
1.6 riegler 15: \item At the \textbf{Set User Preferences} screen, select
16: \includegraphics[width=0.03\paperwidth]{network-workgroup}
1.10 ! raeburn 17: \textbf{Register Response Devices (``Clickers'')}.
1.6 riegler 18: \item Type your clicker ID in the text box.
19: Below are instructions on how to find your clicker ID for various clicker models.
20: \item Click the \fbox{Save} button.
21:
22: \end{enumerate}
23:
24:
1.5 felicia 25:
1.1 www 26: {\bf i$>$clicker}: on i$>$clicker devices, the clicker ID is located on a sticker on the back.
27:
28: \begin{figure}
1.8 www 29: \begin{center}\includegraphics[ width=0.30\paperwidth]{iclicker}\end{center}
1.9 raeburn 30: \caption{Location of Label on i$>$clickers}
1.1 www 31: \end{figure}
32:
1.8 www 33: {\bf Turning Technology}: on Turning Technology devices, the clicker ID is located on a sticker on the back.
34:
35: \begin{figure}
36: \begin{center}\includegraphics[ width=0.30\paperwidth]{turning}\end{center}
37: \caption{Location of Label on Turning Technology clickers}
38: \end{figure}
39:
40:
41:
1.1 www 42: {\bf Interwrite RF}: on the RF version of the Interwrite clicker, you need to go through a number of steps. When you first switch it on, it will look for a class. Cancel that by pressing the asterisk key.
43: \begin{figure}
44: \begin{center}\includegraphics[ width=0.50\paperwidth]{interwrite1}\end{center}
45: \caption{Interwrite Step 1}
46: \end{figure}
47:
48: Next, enter the menu by pressing the Left key.
49: \begin{figure}
50: \begin{center}\includegraphics[ width=0.50\paperwidth]{interwrite2}\end{center}
51: \caption{Interwrite Step 2}
52: \end{figure}
53:
54: Scroll, using the Down key, to the entry Diagnostics.
55: \begin{figure}
56: \begin{center}\includegraphics[ width=0.50\paperwidth]{interwrite3}\end{center}
57: \caption{Interwrite Step 3}
58: \end{figure}
59:
60: Press the Enter key to enter Diagnostics.
61: \begin{figure}
62: \begin{center}\includegraphics[ width=0.50\paperwidth]{interwrite4}\end{center}
63: \caption{Interwrite Step 4}
64: \end{figure}
65:
66: The clicker ID is listed.
67: \begin{figure}
68: \begin{center}\includegraphics[ width=0.50\paperwidth]{interwrite5}\end{center}
69: \caption{Interwrite Step 5}
70: \end{figure}
71:
1.2 www 72: {\bf Interwrite IR}: the clicker ID (6 digits) is located on a sticker on the back of the device.
73:
74: {\bf Interwrite Virtual}: The clicker ID is the Media Access Control address (``MAC address'') of your network card. MAC addresses look like this
75:
76: {\tt 01-23-45-67-89-ab}
77:
78: or like this
79:
80: {\tt 01:23:45:67:89:ab}
81:
82: How to locate this depends on your operating system.
83:
84: {\it Windows Vista}
85: \begin{itemize}
86: \item Click the Start Button and select Start Search.
87: \item Type {\tt cmd} in the blank box. Hit Enter.
88: \item In the command prompt window, type {\tt ipconfig /all}
89: \item Locate the number that goes with the adapter you would use in the lecture hall.
90: \end{itemize}
91:
92: {\it Windows NT / 2000 or XP}
93: \begin{itemize}
94: \item After clicking on the Start Button, click on Run.
95: \item Type {\it command} in the blank box. Click on OK.
96: \item Once a small black window appears, type in {\tt winipcfg}
97: \item Locate the number to the right of ``Physical Address.''
98: \end{itemize}
99:
100: {\it Windows 95/98/ME}
101: \begin{itemize}
102: \item After clicking on the Start Button, click on Run.
103: \item Type in {\tt winipcfg} in the blank box. Click on ``OK.''
104: \item Look under the info for the Ethernet adapter you would use in the lecture hall.
105: \item Locate the number next to ``Adapter Address.''
106: \end{itemize}
107:
108: {\it Macintosh (OS X)}
109: \begin{itemize}
1.10 ! raeburn 110: \item Under the Apple menu, select ``System Preferences''.
! 111: \item Select the ``Network'' Pane.
1.2 www 112: \item Doubleclick on the adapter you are using, for example ``Airport'' or ``Built-in Ethernet'' (use the adapter you would use in the lecture hall).
113: \item Click on the ``Airport'' or ``Ethernet'' tab, respectively - the number is displayed.
114: \end{itemize}
115:
116: {\it Linux}
1.3 www 117: Type {\tt /sbin/ifconfig -a} and look up the relevant info. For example:
1.2 www 118: \begin{verbatim}
119: [root@foo bar]# /sbin/ifconfig -a
120: eth0 Link encap:Ethernet HWaddr 01:23:45:67:89:AB
121: ...
122: \end{verbatim}
123: The number is the HWaddr.
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>