Return to Clicker_Registration.tex CVS log

Up to [LON-CAPA] / loncom / html / adm / help / tex

Annotation of loncom/html/adm/help/tex/Clicker_Registration.tex, revision 1.5

1.4       albertel    1: \label{Clicker_Registration}
1.5     ! felicia     2: LON-CAPA users can register their clickers by entering their clicker ID into the ``Register Clicker'' section of the Preferences screen which can be accessed from the Main Menu.  Below are instructions on how to find your clicker ID for various clicker models.
        !             3: 
1.1       www         4: {\bf i$>$clicker}: on i$>$clicker devices, the clicker ID is located on a sticker on the back.
                      5: 
                      6: \begin{figure}
                      7: \begin{center}\includegraphics[  width=0.50\paperwidth]{iclicker}\end{center}
                      8: \caption{Location of Label on i>clickers}
                      9: \end{figure}
                     10: 
                     11: {\bf Interwrite RF}: on the RF version of the Interwrite clicker, you need to go through a number of steps. When you first switch it on, it will look for a class. Cancel that by pressing the asterisk key.
                     12: \begin{figure}
                     13: \begin{center}\includegraphics[  width=0.50\paperwidth]{interwrite1}\end{center}
                     14: \caption{Interwrite Step 1}
                     15: \end{figure}
                     16: 
                     17: Next, enter the menu by pressing the Left key.
                     18: \begin{figure}
                     19: \begin{center}\includegraphics[  width=0.50\paperwidth]{interwrite2}\end{center}
                     20: \caption{Interwrite Step 2}
                     21: \end{figure}
                     22: 
                     23: Scroll, using the Down key, to the entry Diagnostics.
                     24: \begin{figure}
                     25: \begin{center}\includegraphics[  width=0.50\paperwidth]{interwrite3}\end{center}
                     26: \caption{Interwrite Step 3}
                     27: \end{figure}
                     28: 
                     29: Press the Enter key to enter Diagnostics.
                     30: \begin{figure}
                     31: \begin{center}\includegraphics[  width=0.50\paperwidth]{interwrite4}\end{center}
                     32: \caption{Interwrite Step 4}
                     33: \end{figure}
                     34: 
                     35: The clicker ID is listed.
                     36: \begin{figure}
                     37: \begin{center}\includegraphics[  width=0.50\paperwidth]{interwrite5}\end{center}
                     38: \caption{Interwrite Step 5}
                     39: \end{figure}
                     40: 
1.2       www        41: {\bf Interwrite IR}: the clicker ID (6 digits) is located on a sticker on the back of the device.
                     42: 
                     43: {\bf Interwrite Virtual}: The clicker ID is the Media Access Control address (``MAC address'') of your network card. MAC addresses look like this
                     44: 
                     45: {\tt 01-23-45-67-89-ab}
                     46: 
                     47: or like this
                     48: 
                     49: {\tt 01:23:45:67:89:ab}
                     50: 
                     51: How to locate this depends on your operating system.
                     52: 
                     53: {\it Windows Vista}
                     54: \begin{itemize}
                     55: \item Click the Start Button and select Start Search.
                     56: \item Type {\tt cmd} in the blank box. Hit Enter.
                     57: \item In the command prompt window, type {\tt ipconfig /all}
                     58: \item Locate the number that goes with the adapter you would use in the lecture hall.
                     59: \end{itemize}
                     60: 
                     61: {\it Windows NT / 2000 or XP}
                     62: \begin{itemize}
                     63: \item After clicking on the Start Button, click on Run.
                     64: \item Type {\it command} in the blank box. Click on OK.
                     65: \item Once a small black window appears, type in {\tt winipcfg}
                     66: \item Locate the number to the right of ``Physical Address.''
                     67: \end{itemize}
                     68: 
                     69: {\it Windows 95/98/ME}
                     70: \begin{itemize}
                     71: \item After clicking on the Start Button, click on Run.
                     72: \item Type in {\tt winipcfg} in the blank box. Click on ``OK.''
                     73: \item Look under the info for the Ethernet adapter you would use in the lecture hall.
                     74: \item Locate the number next to ``Adapter Address.''
                     75: \end{itemize}
                     76: 
                     77: {\it Macintosh (OS X)}
                     78: \begin{itemize} 
                     79: \item Under the Apple menu, select "System Preferences".
                     80: \item Select the "Network" Pane.
                     81: \item Doubleclick on the adapter you are using, for example ``Airport'' or ``Built-in Ethernet'' (use the adapter you would use in the lecture hall).
                     82: \item Click on the ``Airport'' or ``Ethernet'' tab, respectively - the number is displayed.
                     83: \end{itemize}
                     84: 
                     85: {\it Linux}
1.3       www        86: Type {\tt /sbin/ifconfig -a} and look up the relevant info. For example:
1.2       www        87: \begin{verbatim}
                     88: [root@foo bar]# /sbin/ifconfig -a
                     89: eth0 Link encap:Ethernet HWaddr 01:23:45:67:89:AB
                     90: ...
                     91: \end{verbatim}
                     92: The number is the HWaddr.