--- loncom/interface/lonpreferences.pm 2004/05/25 22:00:21 1.43
+++ loncom/interface/lonpreferences.pm 2008/07/18 12:36:11 1.125
@@ -1,7 +1,7 @@
# The LearningOnline Network
# Preferences
#
-# $Id: lonpreferences.pm,v 1.43 2004/05/25 22:00:21 raeburn Exp $
+# $Id: lonpreferences.pm,v 1.125 2008/07/18 12:36:11 raeburn Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -33,6 +33,7 @@
package Apache::lonpreferences;
use strict;
+use LONCAPA;
use Apache::Constants qw(:common);
use Apache::File;
use Crypt::DES;
@@ -40,6 +41,8 @@ use DynaLoader; # for Crypt::DES version
use Apache::loncommon();
use Apache::lonhtmlcommon();
use Apache::lonlocal;
+use Apache::lonnet;
+use LONCAPA();
#
# Write lonnet::passwd to do the call below.
@@ -92,10 +95,50 @@ sub des_decrypt {
################################################################
# Language Change Subroutines #
################################################################
+
+sub wysiwygchanger {
+ my $r = shift;
+ my %userenv = &Apache::lonnet::get
+ ('environment',['wysiwygeditor']);
+ my $onselect='checked="checked"';
+ my $offselect='';
+ if ($userenv{'wysiwygeditor'} eq 'on') {
+ $onselect='';
+ $offselect='checked="checked"';
+ }
+ my $switchoff=&mt('Disable WYSIWYG editor');
+ my $switchon=&mt('Enable WYSIWYG editor');
+ my $warning='';
+ if ($env{'user.adv'}) {
+ $warning.="
".&mt("The WYSIWYG editor only supports simple HTML and is in many cases unsuited for advanced authoring. In a number of cases, it may destroy advanced authoring involving LaTeX and script function calls.")."
",
+ $caller,$mailtoken);
+ return 1;
+ }
+ } else {
+ $user = $env{'user.name'};
+ $domain = $env{'user.domain'};
+ $homeserver = $env{'user.home'};
+ }
my $currentauth=&Apache::lonnet::queryauthenticate($user,$domain);
# Check for authentication types that allow changing of the password.
- return if ($currentauth !~ /^(unix|internal):/);
- #
- $r->print(<
-
-LON-CAPA Preferences: Change password for $user
-
-ENDHEADER
+ if ($currentauth !~ /^(unix|internal):/) {
+ if ($caller eq 'reset_by_email') {
+ &passwordchanger($r,"
\n".
+ &mt("Authentication type for this user can not be changed by this mechanism").
+ "\n
",
+ $caller,$mailtoken);
+ return 1;
+ } else {
+ return;
+ }
+ }
#
- my $currentpass = $ENV{'form.currentpass'};
- my $newpass1 = $ENV{'form.newpass_1'};
- my $newpass2 = $ENV{'form.newpass_2'};
- my $logtoken = $ENV{'form.logtoken'};
+ my $currentpass = $env{'form.currentpass'};
+ my $newpass1 = $env{'form.newpass_1'};
+ my $newpass2 = $env{'form.newpass_2'};
+ my $logtoken = $env{'form.logtoken'};
# Check for empty data
unless (defined($currentpass) &&
defined($newpass1) &&
defined($newpass2) ){
- &passwordchanger($r,"
\nERROR".
- "Password data was blank.\n
");
+ &passwordchanger($r,"
\n".
+ &mt("One or more password fields were blank").
+ "\n
",$caller,$mailtoken);
return;
}
# Get the keys
@@ -560,34 +1398,55 @@ ENDHEADER
my $tmpinfo = Apache::lonnet::reply('tmpget:'.$logtoken,$lonhost);
if (($tmpinfo=~/^error/) || ($tmpinfo eq 'con_lost')) {
# I do not a have a better idea about how to handle this
+ my $tryagain_text = &mt('Please log out and try again.');
+ if ($caller eq 'reset_by_email') {
+ $tryagain_text = &mt('Please try again later.');
+ }
+ my $unable=&mt("Unable to retrieve saved token for password decryption");
$r->print(<
-ERROR: Unable to retrieve stored token for
-password decryption. Please log out and try again.
+$unable. $tryagain_text
ENDERROR
# Probably should log an error here
- return;
+ return 1;
}
my ($ckey,$n1key,$n2key)=split(/&/,$tmpinfo);
#
$currentpass = &des_decrypt($ckey ,$currentpass);
$newpass1 = &des_decrypt($n1key,$newpass1);
$newpass2 = &des_decrypt($n2key,$newpass2);
- #
+ #
+ if ($caller eq 'reset_by_email') {
+ my %data = &Apache::lonnet::tmpget($mailtoken);
+ if (keys(%data) == 0) {
+ &passwordchanger($r,
+ ''.
+ &mt('Could not verify current authentication.').' '.
+ &mt('Please try again.').'',$caller,$mailtoken);
+ return 1;
+ }
+ if ($currentpass ne $data{'temppasswd'}) {
+ &passwordchanger($r,
+ ''.
+ &mt('Could not verify current authentication.').' '.
+ &mt('Please try again.').'',$caller,$mailtoken);
+ return 1;
+ }
+ }
if ($newpass1 ne $newpass2) {
&passwordchanger($r,
- 'ERROR:'.
- 'The new passwords you entered do not match. '.
- 'Please try again.');
- return;
+ ''.
+ &mt('The new passwords you entered do not match.').' '.
+ &mt('Please try again.').'',$caller,$mailtoken);
+ return 1;
}
if (length($newpass1) < 7) {
&passwordchanger($r,
- 'ERROR:'.
- 'Passwords must be a minimum of 7 characters long. '.
- 'Please try again.');
- return;
+ ''.
+ &mt('Passwords must be a minimum of 7 characters long.').' '.
+ &mt('Please try again.').'',$caller,$mailtoken);
+ return 1;
}
#
# Check for bad characters
@@ -597,31 +1456,30 @@ ENDERROR
}
if ($badpassword) {
# I can't figure out how to enter bad characters on my browser.
- &passwordchanger($r,<ERROR:
-The password you entered contained illegal characters.
-Valid characters are: space and
+ my $errormessage =''.
+ &mt('The password you entered contained illegal characters.').' '.
+ &mt('Valid characters are').(<<"ENDERROR");
+: space and
+
ENDERROR
+ &passwordchanger($r,$errormessage,$caller,$mailtoken);
+ return 1;
}
#
# Change the password (finally)
my $result = &Apache::lonnet::changepass
- ($user,$domain,$currentpass,$newpass1,$homeserver);
+ ($user,$domain,$currentpass,$newpass1,$homeserver,$caller);
# Inform the user the password has (not?) been changed
if ($result =~ /^ok$/) {
- $r->print(<<"ENDTEXT");
-
The password for $user was successfully changed
-ENDTEXT
+ $r->print("
".&mt('The password for [_1] was successfully changed',$user)."
");
} else {
# error error: run in circles, scream and shout
- $r->print(<The password for $user was not changed
-Please make sure your old password was entered correctly.
-ENDERROR
+ $r->print("
".&mt("The password for [_1] was not changed",$user)."
".
+ &mt('Please make sure your old password was entered correctly.'));
+ return 1;
}
return;
}
@@ -631,8 +1489,8 @@ ENDERROR
################################################################
sub discussionchanger {
my $r = shift;
- my $user = $ENV{'user.name'};
- my $domain = $ENV{'user.domain'};
+ my $user = $env{'user.name'};
+ my $domain = $env{'user.domain'};
my %userenv = &Apache::lonnet::get
('environment',['discdisplay','discmarkread']);
my $discdisp = 'allposts';
@@ -654,7 +1512,7 @@ sub discussionchanger {
my $function = &Apache::loncommon::get_users_function();
my $color = &Apache::loncommon::designparm($function.'.tabbg',
- $ENV{'user.domain'});
+ $env{'user.domain'});
my %lt = &Apache::lonlocal::texthash(
'pref' => 'Display Preference',
'curr' => 'Current setting ',
@@ -690,43 +1548,41 @@ sub discussionchanger {
}
$r->print(<<"END");
-
Note: $lt{'thde'}
@@ -736,39 +1592,117 @@ END
sub verify_and_change_discussion {
my $r = shift;
- my $user = $ENV{'user.name'};
- my $domain = $ENV{'user.domain'};
+ my $user = $env{'user.name'};
+ my $domain = $env{'user.domain'};
my $message='';
- if (defined($ENV{'form.discdisp'}) ) {
- my $newdisp = $ENV{'form.newdisp'};
+ if (defined($env{'form.discdisp'}) ) {
+ my $newdisp = $env{'form.newdisp'};
if ($newdisp eq 'unread') {
- $message .='In discussions: only new posts will be displayed. ';
+ $message .=&mt('In discussions: only new posts will be displayed.').' ';
&Apache::lonnet::put('environment',{'discdisplay' => $newdisp});
- &Apache::lonnet::appenv('environment.discdisplay' => $newdisp);
+ &Apache::lonnet::appenv({'environment.discdisplay' => $newdisp});
} else {
- $message .= 'In discussions: all posts will be displayed. ';
+ $message .= &mt('In discussions: all posts will be displayed.').' ';
&Apache::lonnet::del('environment',['discdisplay']);
&Apache::lonnet::delenv('environment\.discdisplay');
}
}
- if (defined($ENV{'form.discmark'}) ) {
- my $newmark = $ENV{'form.newmark'};
+ if (defined($env{'form.discmark'}) ) {
+ my $newmark = $env{'form.newmark'};
if ($newmark eq 'ondisp') {
- $message.='In discussions: new posts will be cease to be identified as "new" after display. ';
+ $message.=&mt('In discussions: new posts will be cease to be identified as "NEW" after display.').' ';
&Apache::lonnet::put('environment',{'discmarkread' => $newmark});
- &Apache::lonnet::appenv('environment.discmarkread' => $newmark);
+ &Apache::lonnet::appenv({'environment.discmarkread' => $newmark});
} else {
- $message.='In discussions: posts will be identified as "new" until marked as read by the reader. ';
+ $message.=&mt('In discussions: posts will be identified as "NEW" until marked as read by the reader.').' ';
&Apache::lonnet::del('environment',['discmarkread']);
&Apache::lonnet::delenv('environment\.discmarkread');
}
}
$r->print(<
$message
ENDVCSCREEN
}
+################################################################
+# Subroutines for page display on course access (Course Coordinators)
+################################################################
+sub coursedisplaychanger {
+ my $r = shift;
+ my $user = $env{'user.name'};
+ my $domain = $env{'user.domain'};
+ my %userenv = &Apache::lonnet::get('environment',['course_init_display']);
+ my $currvalue = 'whatsnew';
+ my $firstselect = '';
+ my $whatsnewselect = 'checked="checked"';
+ if (exists($userenv{'course_init_display'})) {
+ if ($userenv{'course_init_display'} eq 'firstres') {
+ $currvalue = 'firstres';
+ $firstselect = 'checked="checked"';
+ $whatsnewselect = '';
+ }
+ }
+ my %pagenames = (
+ firstres => 'First resource',
+ whatsnew => "What's new page",
+ );
+ my $whatsnew_off=&mt('Display the [_1] in the course.','first resource');
+ my $whatsnew_on=&mt('Display the "[_1]" page - a summary of items in the course which require attention.',"What's New");
+
+ $r->print(' '.&mt('Set the default page to be displayed when you select a course role').' '.&mt('(Currently: [_1])',$pagenames{$currvalue}).' '.&mt('The global user preference you set for your courses can be overridden in an individual course by setting a course specific setting via the "[_1]" page in the course',"What's New").'