--- loncom/interface/lonpreferences.pm 2006/06/14 18:56:58 1.88
+++ loncom/interface/lonpreferences.pm 2009/02/19 11:27:52 1.142
@@ -1,7 +1,7 @@
# The LearningOnline Network
# Preferences
#
-# $Id: lonpreferences.pm,v 1.88 2006/06/14 18:56:58 albertel Exp $
+# $Id: lonpreferences.pm,v 1.142 2009/02/19 11:27:52 zhu Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -42,6 +42,7 @@ use Apache::loncommon();
use Apache::lonhtmlcommon();
use Apache::lonlocal;
use Apache::lonnet;
+use LONCAPA();
#
# Write lonnet::passwd to do the call below.
@@ -97,6 +98,12 @@ sub des_decrypt {
sub wysiwygchanger {
my $r = shift;
+ Apache::lonhtmlcommon::add_breadcrumb(
+ { href => '/adm/preferences?action=changewysiwyg',
+ text => 'Change WYSIWYG Preferences'});
+ $r->print(Apache::loncommon::start_page('Change WYSIWYG Preferences'));
+ $r->print(Apache::lonhtmlcommon::breadcrumbs('Change WYSIWYG Preferences'));
+
my %userenv = &Apache::lonnet::get
('environment',['wysiwygeditor']);
my $onselect='checked="checked"';
@@ -107,14 +114,19 @@ sub wysiwygchanger {
}
my $switchoff=&mt('Disable WYSIWYG editor');
my $switchon=&mt('Enable WYSIWYG editor');
+ my $warning='';
+ if ($env{'user.adv'}) {
+ $warning.="
".&mt("The WYSIWYG editor only supports simple HTML and is in many cases unsuited for advanced authoring. In a number of cases, it may destroy advanced authoring involving LaTeX and script function calls.")."
";
+ }
$r->print(<
+$warning
ENDLSCREEN
- $r->print(' ');
+ $r->print(' ');
}
@@ -122,8 +134,10 @@ sub verify_and_change_wysiwyg {
my $r = shift;
my $newsetting=$env{'form.wysiwyg'};
&Apache::lonnet::put('environment',{'wysiwygeditor' => $newsetting});
- &Apache::lonnet::appenv('environment.wysiwygeditor' => $newsetting);
- $r->print('
');
}
################################################################
@@ -131,6 +145,12 @@ sub verify_and_change_wysiwyg {
################################################################
sub languagechanger {
my $r = shift;
+
+ Apache::lonhtmlcommon::add_breadcrumb(
+ { href => '/adm/preferences?action=changelanguages',
+ text => 'Change Language'});
+ $r->print(Apache::loncommon::start_page('Change Language'));
+ $r->print(Apache::lonhtmlcommon::breadcrumbs('Change Language'));
my $user = $env{'user.name'};
my $domain = $env{'user.domain'};
my %userenv = &Apache::lonnet::get
@@ -152,7 +172,7 @@ sub languagechanger {
$pref: $selectionbox
ENDLSCREEN
- $r->print(' ');
+ $r->print(' ');
}
@@ -166,16 +186,18 @@ sub verify_and_change_languages {
my $message='';
if ($newlanguage) {
&Apache::lonnet::put('environment',{'languages' => $newlanguage});
- &Apache::lonnet::appenv('environment.languages' => $newlanguage);
- $message='Set new preferred languages to '.$newlanguage;
+ &Apache::lonnet::appenv({'environment.languages' => $newlanguage});
+ $message=&mt('Set new preferred languages to ').'"'.$newlanguage.'".';
} else {
&Apache::lonnet::del('environment',['languages']);
- &Apache::lonnet::delenv('environment\.languages');
- $message='Reset preferred language';
+ &Apache::lonnet::delenv('environment.languages');
+ $message=&mt('Reset preferred language.');
}
- $r->print(<print(< '/adm/preferences?action=changetexenginepref',
+ text => 'Change How Math Equations Are Displayed'});
+ $r->print(Apache::loncommon::start_page('Change How Math Equations Are Displayed'));
+ $r->print(Apache::lonhtmlcommon::breadcrumbs('Change How Math Equations Are Displayed'));
my $user = $env{'user.name'};
my $domain = $env{'user.domain'};
my %userenv = &Apache::lonnet::get('environment',['texengine']);
my $texengine=$userenv{'texengine'};
- my $pref=&mt('Preferred method to display Math');
my %mathchoices=('' => 'Default',
- 'tth' => 'TeX to HTML',
+ 'tth' => 'tth (TeX to HTML)',
#'ttm' => 'TeX to MathML',
'jsMath' => 'jsMath',
- 'mimetex' => 'Convert to Images'
+ 'mimetex' => 'mimetex (Convert to Images)'
);
my $selectionbox=&Apache::loncommon::select_form($texengine,'texengine',
%mathchoices);
my $jsMath_start=&Apache::lontexconvert::jsMath_header();
- my $change=&mt('Change');
- $r->print(<
+ my %lt=&Apache::lonlocal::texthash(
+ 'headline' => 'Change Math Preferences',
+ 'preftxt' => 'Preferred method to display Math',
+ 'change' => 'Save',
+ 'exmpl' => 'Examples',
+ 'jsmath' => 'jsMath:',
+ 'tth' => 'tth (TeX to HTML):',
+ 'mimetex' => 'mimetex (Convert to Images):',
+ );
+ $r->print(<$lt{'headline'}
-Examples:
-
TeX to HTML
-
+
+$lt{'preftxt'}: $selectionbox
+
+
-
jsMath
+
+
+
+$lt{'exmpl'}
+
+
$lt{'jsmath'}
+
$jsMath_start
-
+
+
+
$lt{'mimetex'}
+
+
-
Convert to Images
-
-
+
+
$lt{'tth'}
+
+
ENDLSCREEN
if ($env{'environment.texengine'} ne 'jsMath') {
@@ -251,27 +294,28 @@ sub verify_and_change_texengine {
my $newtexengine = $env{'form.texengine'};
$newtexengine=~s/[^\-\w]//g;
if ($newtexengine eq 'ttm') {
- &Apache::lonnet::appenv('browser.mathml' => 1);
+ &Apache::lonnet::appenv({'browser.mathml' => 1});
} else {
if ($env{'environment.texengine'} eq 'ttm') {
- &Apache::lonnet::appenv('browser.mathml' => 0);
+ &Apache::lonnet::appenv({'browser.mathml' => 0});
}
}
my $message='';
if ($newtexengine) {
&Apache::lonnet::put('environment',{'texengine' => $newtexengine});
- &Apache::lonnet::appenv('environment.texengine' => $newtexengine);
- $message='Set new preferred math display to '.$newtexengine;
+ &Apache::lonnet::appenv({'environment.texengine' => $newtexengine});
+ $message=&mt('Set new preferred math display to ').'"'.$newtexengine.'".';
} else {
&Apache::lonnet::del('environment',['texengine']);
- &Apache::lonnet::delenv('environment\.texengine');
- $message='Reset preferred math display.';
+ &Apache::lonnet::delenv('environment.texengine');
+ $message=&mt('Reset preferred math display.');
}
- $r->print(<print(< '/adm/preferences?action=changerolespref',
+ text => 'Change '.$role.' Page Pref'});
+ $r->print(Apache::loncommon::start_page('Change '.$role.' Page Pref'));
+ $r->print(Apache::lonhtmlcommon::breadcrumbs('Change '.$role.' Page Pref'));
my $hotlist_flag=$userenv{'recentroles'};
my $hotlist_n=$userenv{'recentrolesn'};
my $checked;
@@ -298,55 +349,158 @@ sub rolesprefchanger {
$options .= "\n";
}
- $r->print(<Some LON-CAPA users have a long list of roles. The Recent Roles Hotlist
-feature keeps track of the last N roles which have been
-visited and places a table of these at the top of the roles page.
-People with very few roles should leave this feature disabled.
-
+# Get list of recent roles and display with checkbox in front
+ my $roles_check_list = '';
+ my $role_key='';
+ if ($env{'environment.recentroles'}) {
+ my %recent_roles =
+ &Apache::lonhtmlcommon::get_recent('roles',$env{'environment.recentrolesn'});
+ my %frozen_roles =
+ &Apache::lonhtmlcommon::get_recent_frozen('roles',$env{'environment.recentrolesn'});
+
+ my %role_text = &rolespref_get_role_text([keys(%recent_roles)]);
+ my @sorted_roles = sort {$role_text{$a} cmp $role_text{$b}} keys(%role_text);
+
+ $roles_check_list .=
+ &Apache::loncommon::start_data_table().
+ &Apache::loncommon::start_data_table_header_row().
+ "
\n".
+ &mt("One or more password fields were blank").
+ "\n
",$caller,$mailtoken);
return;
}
# Get the keys
@@ -746,10 +1475,14 @@ sub verify_and_change_password {
my $tmpinfo = Apache::lonnet::reply('tmpget:'.$logtoken,$lonhost);
if (($tmpinfo=~/^error/) || ($tmpinfo eq 'con_lost')) {
# I do not a have a better idea about how to handle this
+ my $tryagain_text = &mt('Please log out and try again.');
+ if ($caller eq 'reset_by_email') {
+ $tryagain_text = &mt('Please try again later.');
+ }
+ my $unable=&mt("Unable to retrieve saved token for password decryption");
$r->print(<
-ERROR: Unable to retrieve stored token for
-password decryption. Please log out and try again.
+$unable. $tryagain_text
ENDERROR
# Probably should log an error here
@@ -760,19 +1493,36 @@ ENDERROR
$currentpass = &des_decrypt($ckey ,$currentpass);
$newpass1 = &des_decrypt($n1key,$newpass1);
$newpass2 = &des_decrypt($n2key,$newpass2);
- #
+ #
+ if ($caller eq 'reset_by_email') {
+ my %data = &Apache::lonnet::tmpget($mailtoken);
+ if (keys(%data) == 0) {
+ &passwordchanger($r,
+ ''.
+ &mt('Could not verify current authentication.').' '.
+ &mt('Please try again.').'',$caller,$mailtoken);
+ return 1;
+ }
+ if ($currentpass ne $data{'temppasswd'}) {
+ &passwordchanger($r,
+ ''.
+ &mt('Could not verify current authentication.').' '.
+ &mt('Please try again.').'',$caller,$mailtoken);
+ return 1;
+ }
+ }
if ($newpass1 ne $newpass2) {
&passwordchanger($r,
- 'ERROR:'.
- 'The new passwords you entered do not match. '.
- 'Please try again.');
+ ''.
+ &mt('The new passwords you entered do not match.').' '.
+ &mt('Please try again.').'',$caller,$mailtoken);
return 1;
}
if (length($newpass1) < 7) {
&passwordchanger($r,
- 'ERROR:'.
- 'Passwords must be a minimum of 7 characters long. '.
- 'Please try again.');
+ ''.
+ &mt('Passwords must be a minimum of 7 characters long.').' '.
+ &mt('Please try again.').'',$caller,$mailtoken);
return 1;
}
#
@@ -783,31 +1533,35 @@ ENDERROR
}
if ($badpassword) {
# I can't figure out how to enter bad characters on my browser.
- &passwordchanger($r,<ERROR:
-The password you entered contained illegal characters.
-Valid characters are: space and
+ my $errormessage =''.
+ &mt('The password you entered contained illegal characters.').' '.
+ &mt('Valid characters are').(<<"ENDERROR");
+: space and
+
ENDERROR
+ &passwordchanger($r,$errormessage,$caller,$mailtoken);
+ return 1;
}
#
# Change the password (finally)
my $result = &Apache::lonnet::changepass
- ($user,$domain,$currentpass,$newpass1,$homeserver);
+ ($user,$domain,$currentpass,$newpass1,$homeserver,$caller);
# Inform the user the password has (not?) been changed
+ my $message;
if ($result =~ /^ok$/) {
- $r->print(<<"ENDTEXT");
-
The password for $user was successfully changed
-ENDTEXT
+ $message = &mt('The password for [_1] was successfully changed',$user);
+ print_main_menu($r, $message);
+# $r->print("
".&mt('The password for [_1] was successfully changed',$user)."
");
} else {
# error error: run in circles, scream and shout
- $r->print(<The password for $user was not changed
-Please make sure your old password was entered correctly.
-ENDERROR
+ $message = &mt("The password for [_1] was not changed",$user)
+ .&mt('Please make sure your old password was entered correctly.');
+ print_main_menu($r, $message);
+# $r->print("
".&mt("The password for [_1] was not changed",$user)."
".
+# &mt('Please make sure your old password was entered correctly.'));
return 1;
}
return;
@@ -818,6 +1572,11 @@ ENDERROR
################################################################
sub discussionchanger {
my $r = shift;
+ Apache::lonhtmlcommon::add_breadcrumb(
+ { href => '/adm/preferences?action=changediscussions',
+ text => 'Change Discussion Preferences'});
+ $r->print(Apache::loncommon::start_page('Change Discussion Preferences'));
+ $r->print(Apache::lonhtmlcommon::breadcrumbs('Change Discussion Preferences'));
my $user = $env{'user.name'};
my $domain = $env{'user.domain'};
my %userenv = &Apache::lonnet::get
@@ -846,9 +1605,9 @@ sub discussionchanger {
'pref' => 'Display Preference',
'curr' => 'Current setting ',
'actn' => 'Action',
- 'sdpf' => 'Set display preferences for discussion posts for both bulletin boards and individual resources in all your courses.',
+ 'sdpf' => 'Set display preferences for discussion posts for both discussion boards and individual resources in all your courses.',
'prca' => 'Preferences can be set that determine',
- 'whpo' => 'Which posts are displayed when you display a bulletin board or resource, and',
+ 'whpo' => 'Which posts are displayed when you display a discussion board or resource, and',
'unwh' => 'Under what circumstances posts are identfied as "New"',
'allposts' => 'All posts',
'unread' => 'New posts only',
@@ -908,15 +1667,8 @@ END
END
$r->print(&Apache::loncommon::end_data_table_row().
&Apache::loncommon::end_data_table());
- $r->print(<<"END");
-
-
-
-
-
-Note: $lt{'thde'}
-
-END
+
+ $r->print('
'.&mt('Note').': '.$lt{'thde'}.'');
}
sub verify_and_change_discussion {
@@ -927,30 +1679,31 @@ sub verify_and_change_discussion {
if (defined($env{'form.discdisp'}) ) {
my $newdisp = $env{'form.newdisp'};
if ($newdisp eq 'unread') {
- $message .='In discussions: only new posts will be displayed. ';
+ $message .=&mt('In discussions: only new posts will be displayed.').' ';
&Apache::lonnet::put('environment',{'discdisplay' => $newdisp});
- &Apache::lonnet::appenv('environment.discdisplay' => $newdisp);
+ &Apache::lonnet::appenv({'environment.discdisplay' => $newdisp});
} else {
- $message .= 'In discussions: all posts will be displayed. ';
+ $message .= &mt('In discussions: all posts will be displayed.').' ';
&Apache::lonnet::del('environment',['discdisplay']);
- &Apache::lonnet::delenv('environment\.discdisplay');
+ &Apache::lonnet::delenv('environment.discdisplay');
}
}
if (defined($env{'form.discmark'}) ) {
my $newmark = $env{'form.newmark'};
if ($newmark eq 'ondisp') {
- $message.='In discussions: new posts will be cease to be identified as "new" after display. ';
+ $message.=&mt('In discussions: new posts will be cease to be identified as "NEW" after display.').' ';
&Apache::lonnet::put('environment',{'discmarkread' => $newmark});
- &Apache::lonnet::appenv('environment.discmarkread' => $newmark);
+ &Apache::lonnet::appenv({'environment.discmarkread' => $newmark});
} else {
- $message.='In discussions: posts will be identified as "new" until marked as read by the reader. ';
+ $message.=&mt('In discussions: posts will be identified as "NEW" until marked as read by the reader.').' ';
&Apache::lonnet::del('environment',['discmarkread']);
- &Apache::lonnet::delenv('environment\.discmarkread');
+ &Apache::lonnet::delenv('environment.discmarkread');
}
}
- $r->print(<print(< '/adm/preferences?action=changecourseinit',
+ text => 'Change Course Init. Pref.'});
+ $r->print(Apache::loncommon::start_page('Change Course Initialization Preference'));
+ $r->print(Apache::lonhtmlcommon::breadcrumbs('Change Course Init. Pref.'));
my $user = $env{'user.name'};
my $domain = $env{'user.domain'};
my %userenv = &Apache::lonnet::get('environment',['course_init_display']);
@@ -971,14 +1729,21 @@ sub coursedisplaychanger {
$whatsnewselect = '';
}
}
- my %pagenames = (
+ my %pagenames = &Apache::lonlocal::texthash(
firstres => 'First resource',
- whatsnew => "What's new page",
+ whatsnew => "What's New page",
);
- my $whatsnew_off=&mt('Display the [_1] in the course.','first resource');
- my $whatsnew_on=&mt('Display the "[_1]" page - a summary of items in the course which require attention.',"What's New");
+ my $whatsnew_off=&mt('Display the [_1]first resource[_2] in the course.','','');
+ my $whatsnew_on=&mt("Display the [_1]What's New page[_2] - a summary of items in the course which require attention.",'','');
- $r->print(' '.&mt('Set the default page to be displayed when you select a course role').' '.&mt('(Currently: [_1])',$pagenames{$currvalue}).' '.&mt('The global user preference you set for your courses can be overridden in an individual course by setting a course specific setting via the "[_1]" page in the course',"What's New").'
');
+ $r->print(' '
+ .&mt('Set the default page to be displayed when you select a course role')
+ .' '
+ .&mt('(Currently: [_1])',$pagenames{$currvalue})
+ .' '
+ .&mt("The global user preference you set for your courses can be overridden in an individual course by setting a course specific setting via the [_1]What's New page[_2] in the course.",'','')
+ .'