loncom/interface/lonprintout.pm - diff

Return to lonprintout.pm CVS log

Up to [LON-CAPA] / loncom / interface

Diff for /loncom/interface/lonprintout.pm between versions 1.559 and 1.642

-version 1.559, 2009/07/23 10:53:03
+version 1.642, 2014/04/24 15:31:39
  Line 26
  #
  #
  package Apache::lonprintout;
  use strict;
  use Apache::Constants qw(:common :http);
  use Apache::lonxml;
- Line 41  use Apache::admannotations;
+ Line 40  use Apache::admannotations;
  use Apache::lonenc;
  use Apache::entities;
  use Apache::londefdef;
+ # use Apache::structurelags;	# for language management.
  use File::Basename;
  use HTTP::Response;
  use LONCAPA::map();
- use POSIX qw(strftime);
  use Apache::lonlocal;
  use Carp;
  use LONCAPA;
  my %perm;
  my %parmhash;
  my $resources_printed;
- Line 74  my $ssi_retry_count = 5; # Some arbitrar
+ Line 73  my $ssi_retry_count = 5; # Some arbitrar
  my $font_size = 'normalsize';	# Default is normalsize...
+ #----------------------------  Helper helpers. -------------------------
+ ##
+ # Filter function to determine if a resource is a printable sequence.
+ #
+ # @param $res -Resource to check.
+ #
+ # @return 1 - printable and a resource
+ #         0 - either notm a sequence or not printable.
+ #
+ sub printable_sequence {
+     my $res = shift;
+     # Non-sequences are not listed:
+     if (!$res->is_sequence()) {
+ 	return 0;
+     }
+     # Person with pav or pfo can always print:
+     if ($perm{'pav'} || $perm{'pfo'}) {
+ 	return 1;
+     }
+     if ($res->is_sequence()) {
+ 	my $symb = $res->symb();
+ 	my $navmap   = $res->{NAV_MAP};
+ 	# Find the first resource in the map:
+ 	my $iterator = $navmap->getIterator($res, undef, undef, 1, 1);
+ 	my $first    = $iterator->next();
+ 	while (1) {
+ 	    if ($first == $iterator->END_ITERATOR) { last; }
+ 	    if (ref($first) && ! $first->is_sequence()) {last; }
+ 	    $first = $iterator->next();
+ 	}
+ 	# Might be an empty map:
+ 	if (!ref($first)) {
+ 	    return 0;
+ 	}
+ 	my $partsref = $first->parts();
+ 	my @parts    = @$partsref;
+ 	my ($open, $close) = $navmap->map_printdates($first, $parts[0]);
+ 	return &printable($open, $close);
+     }
+     return 0;
+ }
+ # BZ5209:
+ #    Create the states needed to run the helper for incomplete problems from
+ #    the current folder for selected students.
+ #    This includes:
+ #    -  A resource selector limited to problems (incompleteness must be
+ #       calculated on a student per student basis.
+ #    -  A student selector.
+ #    -  Tie in to the FORMAT of the print job.
+ #
+ # States:
+ #   CHOOSE_INCOMPLETE_PEOPLE_SEQ      - Resource selection.
+ #   CHOOSE_STUDENTS_INCOMPLETE        - Student selection.
+ #   CHOOSE_STUDENTS_INCOMPLETE_FORMAT - Format selection
+ # Parameters:
+ #    helper - the helper which already contains info about the current folder we can
+ #             purloin.
+ #    url    - Top url of the sequence
+ # Return:
+ #     XML that can be parsed by the helper to drive the state machine.
+ #
+ sub create_incomplete_folder_selstud_helper {
+     my ($helper, $map)  = @_;
+     my $symbFilter = '$res->shown_symb()';
+     my $selFilter   = '$res->is_problem()';
+     my $resource_chooser = &generate_resource_chooser('CHOOSE_INCOMPLETE_PEOPLE_SEQ',
+ 						      'Select problem(s) to print',
+ 						      'multichoice="1" toponly="1" addstatus="1" closeallpages="1"',
+ 						      'RESOURCES',
+ 						      'CHOOSE_STUDENTS_INCOMPLETE',
+ 						      $map,
+ 						      $selFilter,
+ 						      '',
+ 						      $symbFilter,
+ 						      '');
+     my $student_chooser = &generate_student_chooser('CHOOSE_STUDENTS_INCOMPLETE',
+ 						 'student_sort',
+ 						 'STUDENTS',
+ 						 'CHOOSE_STUDENTS_INCOMPLETE_FORMAT');
+     my $format_chooser = &generate_format_selector($helper,
+ 						'Format of the print job',
+ 						'CHOOSE_STUDENTS_INCOMPLETE_FORMAT'); # end state.
+     return $resource_chooser . $student_chooser . $format_chooser;
+ }
+ # BZ 5209
+ #     Create the states needed to run the helper for incomplete problems from
+ #     the current folder for selected students.
+ #     This includes:
+ #     - A resource selector limited to problems.  (incompleteness must be calculated
+ #       on a student per student basis.
+ #     - A student selector.
+ #     - Tie in to format for the print job.
+ # States:
+ #    INCOMPLETE_PROBLEMS_COURSE_RESOURCES - Resource selector.
+ #    INCOMPLETE_PROBLEMS_COURSE_STUDENTS  - Student selector.
+ #    INCOMPLETE_PROBLEMS_COURSE_FORMAT    - Format selection.
+ #
+ # Parameters:
+ #   helper   - Helper we are creating states for.
+ # Returns:
+ #   Text that can be parsed by the helper.
+ #
+ sub create_incomplete_course_helper {
+     my $helper = shift;
+     my $filter = '$res->is_problem() || $res->contains_problem() || $res->is_sequence() || $res->is_practice())';
+     my $symbfilter = '$res->shown_symb()';
+     my $resource_chooser = &generate_resource_chooser('INCOMPLETE_PROBLEMS_COURSE_RESOURCES',
+ 						      'Select problem(s) to print',
+ 						      'multichoice = "1" suppressEmptySequences="0" addstatus="1" closeallpagtes="1"',
+ 						      'RESOURCES',
+ 						      'INCOMPLETE_PROBLEMS_COURSE_STUDENTS',
+ 						      '',
+ 						      $filter,
+ 						      '',
+ 						      $symbfilter,
+ 						      '');
+     my $people_chooser  = &generate_student_chooser('INCOMPLETE_PROBLEMS_COURSE_STUDENTS',
+ 						    'student_sort',
+ 						    'STUDENTS',
+ 						    'INCOMPLETE_PROBLEMS_COURSE_FORMAT');
+     my $format = &generate_format_selector($helper,
+ 					   'Format of the print job',
+ 					   'INCOMPLETE_PROBLEMS_COURSE_FORMAT'); # end state.
+     return $resource_chooser . $people_chooser . $format;
+ }
+ # BZ5209
+ #   Creates the states needed to run the print helper for a student
+ #   that wants to print his incomplete problems from the current folder.
+ # Parameters:
+ #   $helper - helper we are generating states for.
+ #   $map    - The map for which the student wants incomplete problems.
+ # Returns:
+ #   XML that defines the helper states being created.
+ #
+ # States:
+ #   CHOOSE_INCOMPLETE_SEQ  - Resource selector.
+ #
+ sub create_incomplete_folder_helper {
+     my ($helper, $map) = @_;
+     my $filter    = '$res->is_problem()';
+     $filter      .= ' && $res->resprintable() ';
+     $filter      .= ' && $res->is_incomplete() ';
+     my $symfilter = '$res->shown_symb()';
+     my $resource_chooser = &generate_resource_chooser('CHOOSE_INCOMPLETE_SEQ',
+ 						      'Select problem(s) to print',
+ 						      'multichoice="1", toponly ="1", addstatus="1", closeallpages="1"',
+ 						      'RESOURCES',
+ 						      'PAGESIZE',
+ 						      $map,
+ 						      $filter, '',
+ 						      $symfilter,
+ 						      '');
+     return $resource_chooser;
+ }
+ #  Returns the text neded for a student chooser.
+ #  that text must still be parsed by the helper xml parser.
+ # Parameters:
+ #   this_state   - State name of the chooser.
+ #   sort_choice  - variable to hold the sorting choice.
+ #   variable     - Name of variable to hold students.
+ #   next_state   - State after chooser.
+ sub generate_student_chooser {
+     my ($this_state,
+ 	$sort_choice,
+ 	$variable,
+ 	$next_state) = @_;
+     my $result = <<CHOOSE_STUDENTS;
+   <state name="$this_state" title="Select Students and Resources">
+       <message><b>Select sorting order of printout</b> </message>
+     <choices variable="$sort_choice">
+       <choice computer='0'>Sort by section then student</choice>
+       <choice computer='1'>Sort by students across sections.</choice>
+     </choices>
+       <message><br /><hr /><br /> </message>
+       <student multichoice='1'
+                variable="$variable"
+                nextstate="$next_state"
+                coursepersonnel="1" />
+   </state>
+ CHOOSE_STUDENTS
+   return $result;
+ }
+ # Generate the text needed for a resource chooser given the top level of
+ # the sequence/page
+ #
+ # Parameters:
+ #     this_state    - State name of the chooser.
+ #     prompt_text   - Text to use to prompt user.
+ #     resource_options - Resource tag options e.g.
+ #                        "multichoice='1', toponly='1', addstatus='1'"
+ #                     that control the selection and appearance of the
+ #                     resource selector.
+ #     variable      - Name of the variable to hold the choice
+ #     next_state    - Name of the next state the helper should transition
+ #                     to
+ #     top_url       - Top level URL within which to make the selector.
+ #                     If empty the top level sequence is shown.
+ #     filter        - How to filter the resources.
+ #     value_func    - <valuefunc> function.
+ #     choice_func   - If not empty generates a <choicefunc> with this function.
+ #     start_new_option
+ #                   - Fragment appended after valuefunc.
+ #
+ #
+ sub generate_resource_chooser {
+     my ($this_state,
+ 	$prompt_text,
+ 	$resource_options,
+ 	$variable,
+ 	$next_state,
+ 	$top_url,
+ 	$filter,
+ 	$choice_func,
+ 	$value_func,
+ 	$start_new_option)  = @_;
+     my $result = <<CHOOSE_RESOURCES;
+ <state name="$this_state" title="$prompt_text">
+     <resource variable="$variable" $resource_options
+               closeallpages="1">
+       <nextstate>$next_state</nextstate>
+       <filterfunc>return $filter;</filterfunc>
+ CHOOSE_RESOURCES
+     if ($choice_func ne '') {
+ 	$result .= "<choicefunc>return $choice_func;</choicefunc>";
+     }
+     if ($top_url ne '') {
+ 	$result .=  "<mapurl>$top_url</mapurl>";
+     }
+     $result .= <<CHOOSE_RESOURCES;
+       <valuefunc>return $value_func;</valuefunc>
+       $start_new_option
+       </resource>
+     </state>
+ CHOOSE_RESOURCES
+     return $result;
+ }
+ #
+ #   Generate the helper XML for a code choice helper dialog:
+ #
+ # Paramters:
+ #   $helper       - Reference to the helper.
+ #   $state        - Name of the state for the chooser.
+ #   $next_state   - Name fo the state to follow the chooser.
+ #   $bubble_types - Populates the bubble sheet type dropt down.
+ #   $code_selections - Provides set of code choices that have been used
+ #   $saved_codes  - Provides the list of saved codes.
+ #
+ # Returns;
+ #   The Xml of the code chooser.
+ #
+ sub generate_code_selector {
+     my ($helper,
+ 	$state,
+ 	$next_state,
+ 	$bubble_types,
+ 	$code_selections,
+ 	$saved_codes) = @_;	# Unpack the parameters.
+     my $result = <<CHOOSE_ANON1;
+   <state name="$state" title="Specify CODEd Assignments">
+     <nextstate>$next_state</nextstate>
+     <message><h4>Fill out one of the forms below</h4></message>
+     <message><br /><hr /> <br /></message>
+     <message><h3>Generate new CODEd Assignments</h3></message>
+     <message><table><tr><td><b>Number of CODEd assignments to print:</b></td><td></message>
+     <string variable="NUMBER_TO_PRINT_TOTAL" maxlength="5" size="5"  noproceed="1">
+        <validator>
+ 	if (((\$helper->{'VARS'}{'NUMBER_TO_PRINT_TOTAL'}+0) < 1) &&
+ 	    !\$helper->{'VARS'}{'REUSE_OLD_CODES'}                &&
+             !\$helper->{'VARS'}{'SINGLE_CODE'}                    &&
+ 	    !\$helper->{'VARS'}{'CODE_SELECTED_FROM_LIST'} ) {
+ 	    return "You need to specify the number of assignments to print";
+ 	}
+         if (((\$helper->{'VARS'}{'NUMBER_TO_PRINT_TOTAL'}+0) >= 1)  &&
+              (\$helper->{'VARS'}{'SINGLE_CODE'} ne '') ) {
+             return 'Specifying number of codes to print and a specific code is not compatible';
+         }
+ 	return undef;
+        </validator>
+     </string>
+     <message></td></tr><tr><td></message>
+     <message><b>Names to save the CODEs under for later:</b></message>
+     <message></td><td></message>
+     <string variable="ANON_CODE_STORAGE_NAME" maxlength="50" size="20" />
+     <message></td></tr><tr><td></message>
+     <message><b>Bubblesheet type:</b></message>
+     <message></td><td></message>
+     <dropdown variable="CODE_OPTION" multichoice="0" allowempty="0">
+     $bubble_types
+     </dropdown>
+     <message></td></tr><tr><td colspan="2"></td></tr><tr><td></message>
+     <message></td></tr><tr><td></table></message>
+     <message><br /><hr /><h3>Print a Specific CODE </h3><br /><table></message>
+     <message><tr><td><b>Enter a CODE to print:</b></td><td></message>
+     <string variable="SINGLE_CODE" size="10">
+         <validator>
+ 	   if(!\$helper->{'VARS'}{'NUMBER_TO_PRINT_TOTAL'}           &&
+ 	      !\$helper->{'VARS'}{'REUSE_OLD_CODES'}                 &&
+ 	      !\$helper->{'VARS'}{'CODE_SELECTED_FROM_LIST'}) {
+ 	      return &Apache::lonprintout::is_code_valid(\$helper->{'VARS'}{'SINGLE_CODE'},
+ 						      \$helper->{'VARS'}{'CODE_OPTION'});
+ 	  } elsif (\$helper->{'VARS'}{'SINGLE_CODE'} ne ''){
+ 	      return 'Specifying a code name is incompatible with specifying number of codes.';
+ 	   } else {
+ 	       return undef;	# Other forces control us.
+ 	   }
+         </validator>
+     </string>
+     <message></td></tr><tr><td></message>
+         $code_selections
+     <message></td></tr></table></message>
+     <message><hr /><h3>Reprint a Set of Saved CODEs</h3><table><tr><td></message>
+     <message><b>Select saved CODEs:</b></message>
+     <message></td><td></message>
+     <dropdown variable="REUSE_OLD_CODES">
+         $saved_codes
+     </dropdown>
+     <message></td></tr></table></message>
+   </state>
+ CHOOSE_ANON1
+    return $result;
+ }
+ #  Returns the XML for choosing how assignments are to be formatted
+ #  that text must still be parsed by the helper xml parser.
+ # Parameters: 3 (required)
+ #   helper       - The helper; $helper->{'VARS'}->{'PRINT_TYPE'} used
+ #                  to check if splitting PDFs by section can be offered.
+ #   title        - Title for the current state.
+ #   this_state   - State name of the chooser.
+ sub generate_format_selector {
+     my ($helper,$title,$this_state) = @_;
+     my $secpdfoption;
+     unless (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_anon')     ||
+             ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_anon_page') ||
+             ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'resources_for_anon')  ) {
+         $secpdfoption =  '<choice computer="sections">Each PDF contains exactly one section</choice>';
+     }
+     return <<RESOURCE_SELECTOR;
+     <state name="$this_state" title="$title">
+     <message><br /><big><i><b>How should the results be printed?</b></i></big><br /></message>
+     <choices variable="EMPTY_PAGES">
+       <choice computer='0'>Start each student\'s assignment on a new page/column (add a pagefeed after each assignment)</choice>
+       <choice computer='1'>Add one empty page/column after each student\'s assignment</choice>
+       <choice computer='2'>Add two empty pages/column after each student\'s assignment</choice>
+       <choice computer='3'>Add three empty pages/column after each student\'s assignment</choice>
+     </choices>
+     <nextstate>PAGESIZE</nextstate>
+     <message><hr width='33%' /><b>How do you want assignments split into PDF files? </b></message>
+     <choices variable="SPLIT_PDFS">
+        <choice computer="all">All assignments in a single PDF file</choice>
+        $secpdfoption
+        <choice computer="oneper">Each PDF contains exactly one assignment</choice>
+        <choice computer="usenumber" relatedvalue="NUMBER_TO_PRINT">
+             Specify the number of assignments per PDF:</choice>
+     </choices>
+     </state>
+ RESOURCE_SELECTOR
+ }
+ #-----------------------------------------------------------------------
+ # Computes an open and close date from a list of open/close dates for a resource's
+ # parts.
+ #
+ # @param \@opens - reference to an array of open dates.
+ # @param \@closes - reference to an array of close dates.
+ #
+ # @return ($open, $close)
+ #
+ # @note If open/close dates are not defined they will be returned as undef
+ # @note It is possible for there to be no overlap in which case -1,-1
+ #       will be returned.
+ # @note The algorithm used is to take the latest open date and the earliest end date.
+ #
+ sub compute_open_window {
+     my ($opensref, $closesref) = @_;
+     my @opens   = @$opensref;
+     my @closes  = @$closesref;
+     # latest open date:
+     my $latest_open;
+     foreach my $open (@opens) {
+ 	if (!defined($latest_open) || ($open > $latest_open)) {
+ 	    $latest_open = $open;
+ 	}
+     }
+     # Earliest close:
+     my $earliest_close;
+     foreach my $close (@closes) {
+ 	if (!defined($earliest_close) || ($close < $earliest_close)) {
+ 	    $earliest_close = $close;
+ 	}
+     }
+     # If no overlap...both are -1 as promised.
+     if (($earliest_close ne '') && ($latest_open ne '')
+ 	 && ($earliest_close < $latest_open)) {
+ 	$latest_open  = -1;
+ 	$earliest_close = -1;
+     }
+     return ($latest_open, $earliest_close);
+ }
+ ##
+ #  Determines if 'now' is within the set of printable dates.
+ #
+ #  @param $open_date - Starting date/timestamp.
+ #  @param $close_date - Ending date/timestamp.
+ #
+ #  @return 0 - Not open.
+ #  @return 1 - open.
+ #
+ sub printable {
+     my ($open_date, $close_date) = @_;
+     my $now = time();
+     # Have to do a bit of fancy footwork around undefined open/close dates:
+     if ($open_date && ($open_date > $now)) {
+ 	return 0;
+     }
+     if ($close_date && ($close_date < $now)) {
+ 	return 0;
+     }
+     return 1;
+ }
+ ##
+ # Returns the innermost print start/print end dates for a resource.
+ # This is done by looking at the start/end dates for its parts and choosing
+ # the intersection of those dates.
+ #
+ # @param res - lonnvamaps::resource object that represents the resource.
+ #
+ # @return (opendate, closedate)
+ #
+ # @note If open/close dates are not defined they will be returned as undef
+ # @note It is possible for there to be no overlap in which case -1,-1
+ #       will be returned.
+ # @note The algorithm used is to take the latest open date and the earliest end date.
+ #       For consistency with &printable() in lonnavmaps.pm determination of start
+ #       date for printing checks printstartdate param first, then, if not set,
+ #       opendate param, then, if not set, contentopen param.
+ sub get_print_dates {
+     my $res = shift;
+     my $partsref = $res->parts();
+     my @parts;
+     if (ref($partsref) eq 'ARRAY') {
+         @parts   = @{$partsref};
+     }
+     my $open_date;
+     my $close_date;
+     my @open_dates;
+     my @close_dates;
+     if (@parts) {
+ 	foreach my $part (@parts) {
+ 	    my $partopen  = $res->parmval('printstartdate', $part);
+ 	    my $partclose = $res->parmval('printenddate',  $part);
+             if (!$partopen) {
+                 $partopen = $res->parmval('opendate',$part);
+             }
+             if (!$partopen) {
+                 $partopen = $res->parmval('contentopen',$part);
+             }
+             if ($partopen) {
+                 push(@open_dates, $partopen);
+             }
+             if ($partclose) {
+                 push(@close_dates, $partclose);
+             }
+ 	    push(@open_dates, $partopen);
+ 	    push(@close_dates, $partclose);
+ 	}
+     }
+     ($open_date, $close_date)  = &compute_open_window(\@open_dates, \@close_dates);
+     return ($open_date, $close_date);
+ }
+ ##
+ # Get the dates for which a course says a resource can be printed.  This is like
+ # get_print_dates but namvaps::course_print_dates are gotten...and not converted
+ # to times either.
+ #
+ # @param $res - Reference to a resource has from lonnvampas::resource.
+ #
+ # @return (opendate, closedate)
+ #
+ sub course_print_dates {
+     my $res = shift;
+     my $partsref = $res->parts();
+     my @parts    = @$partsref;
+     my $open_date;
+     my $close_date;
+     my @open_dates;
+     my @close_dates;
+     my $navmap = $res->{NAV_MAP}; # Slightly OO dirty.
+     # Don't bother looping over undefined or empty parts arraY;
+     if (@parts) {
+ 	foreach my $part (@parts) {
+ 	    my ($partopen, $partclose) = $navmap->course_printdates($res, $part);
+ 	    push(@open_dates, $partopen);
+ 	    push(@close_dates, $partclose);
+ 	}
+ 	($open_date, $close_date) = &compute_open_window(\@open_dates, \@close_dates);
+     }
+     return ($open_date, $close_date);
+ }
+ ##
+ # Same as above but for the enclosing map:
+ #
+ sub map_print_dates {
+     my $res = shift;
+     my $partsref = $res->parts();
+     my @parts    = @$partsref;
+     my $open_date;
+     my $close_date;
+     my @open_dates;
+     my @close_dates;
+     my $navmap = $res->{NAV_MAP}; # slightly OO dirty.
+     # Don't bother looping over undefined or empty parts arraY;
+     if (@parts) {
+ 	foreach my $part (@parts) {
+ 	    my ($partopen, $partclose) = $navmap->map_printdates($res, $part);
+ 	    push(@open_dates, $partopen);
+ 	    push(@close_dates, $partclose);
+ 	}
+ 	($open_date, $close_date) = &compute_open_window(\@open_dates, \@close_dates);
+     }
+     return ($open_date, $close_date);
+ }
+ # Determine if a resource is incomplete given the map:
+ # Parameters:
+ #   $username - Name of user for whom we are checking.
+ #   $domain   - Domain of user we are checking.
+ #   $map - map name.
+ # Returns:
+ #     0 - map is not incomplete.
+ #     1 - map is incomplete.
+ #
+ sub incomplete {
+     my ($username, $domain, $map) = @_;
+     my $navmap = Apache::lonnavmaps::navmap->new($username, $domain);
+     if (defined($navmap)) {
+ 	my $res = $navmap->getResourceByUrl($map);
+ 	my $result = $res->is_incomplete();
+ 	return $result;
+     } else {
+ 	return 1;
+     }
+ }
+ #
+ #  When printing for students, the resoures and order of the
+ #  resources may need to be altered if there are folders with
+ #  random selectiopn or random ordering (or both) enabled.
+ #  This sub computes the set of resources to print for a student
+ #  modified both by random ordering and selection and filtered
+ #  to only those that are in the original set selcted to be printed.
+ #
+ # Parameters:
+ #   $map - The URL of the folder being printed.
+ #          Used to determine which startResource and finishResource
+ #          to use when using the navmap's getIterator method.
+ #   $seq   - The original set of resources to print.
+ #            (really an array of resource names (array of symb's).
+ #   $who   - Student/domain for whome the sequence will be generated.
+ #   $code  - CODE being printed when printing Problems/Resources
+ #            from folder for CODEd assignments
+ #
+ # Implicit inputs:
+ #   $
+ # Returns:
+ #   reference to an array of resources that can be passed to
+ #   print_resources.
+ #
+ sub master_seq_to_person_seq {
+     my ($map, $seq, $who, $code, $nohidemap) = @_;
+     my ($username, $userdomain, $usersection) = split(/:/, $who);
+     # Toss the sequence up into a hash so that we have O(1) lookup time.
+     # on the items that come out of the user's list of resources.
+     #
+     my %seq_hash = map {$_  => 1} @$seq;
+     my @output_seq;
+     my $unhidden;
+     if ($perm{'pav'} && $perm{'vgr'} && $nohidemap) {
+         $unhidden = &Apache::lonnet::clutter($map);
+     }
+     my $navmap           = Apache::lonnavmaps::navmap->new($username, $userdomain,
+                                                            $code, $unhidden);
+     my ($start,$finish);
+     if ($map) {
+         my $mapres = $navmap->getResourceByUrl($map);
+         if ($mapres->is_map()) {
+             $start = $mapres->map_start();
+             $finish = $mapres->map_finish();
+         }
+     }
+     unless ($start && $finish) {
+         $start = $navmap->firstResource();
+         $finish = $navmap->finishResource();
+     }
+     my $iterator         = $navmap->getIterator($start,$finish,{},1);
+     #  Iterate on the resource..select the items that are randomly selected
+     #  and that are in the seq_has.  Presumably the iterator will take care
+     # of the random ordering part of the deal.
+     #
+     my $curres;
+     while ($curres = $iterator->next()) {
+ 	#
+ 	#  Only process resources..that are not removed by randomout...
+ 	#  and are selected for printint as well.
+ 	#
+         if (ref($curres) && ! $curres->randomout()) {
+             my $currsymb = $curres->symb();
+             if (exists($seq_hash{$currsymb})) {
+                 push(@output_seq, $currsymb);
+ 	    }
+ 	}
+     }
+     return \@output_seq;		# for now.
+ }
  # Fetch the contents of a resource, uninterpreted.
  # This is used here to fetch a latex file to be included
- Line 129  sub set_font_size {
+ Line 836  sub set_font_size {
      my ($text) = @_;
-     $text =~ s/\\begin{document}/\\begin{document}{\\$font_size/;
+     # There appear to be cases where the font directive is empty.. in which
+     # case the first substituion would  insert a spurious \ oh happy day.
+     # as this has been the cause of much mystery and hair pulling _sigh_
+     if ($font_size ne '') {
+ 	$text =~ s/\\begin{document}/\\begin{document}{\\$font_size/;
+     }
      $text =~ s/\\end{document}/}\\end{document}/;
      return $text;
- Line 169  sub include_pdf {
+ Line 883  sub include_pdf {
      # (unlikely).  If it did exist, add the pdf to the set of files/images that
      # need tob e converted for this print job:
-     $file =~ s|(.*)/res/|/home/httpd/html/res/|;
+     my $londocroot = $Apache::lonnet::perlvar{'lonDocRoot'};
+     $file =~ s{(.*)/res/}{$londocroot/res/};
-     open(FILE,">>/home/httpd/prtspool/$env{'user.name'}_$env{'user.domain'}_printout.dat");
+     open(FILE,">>$Apache::lonnet::perlvar{'lonPrtDir'}/$env{'user.name'}_$env{'user.domain'}_printout.dat");
      print FILE ("$file\n");
      close (FILE);
- Line 194  sub include_pdf {
+ Line 909  sub include_pdf {
  }
+ ##
+ #  Collect the various \select_language{language_name}
+ #  latex tags to build a \usepackage[lang-list]{babel} which will
+ #  appear just prior to the \begin{document} at the front of the concatenated
+ #  set of resources:
+ # @param doc - The string of latex to search/replace.
+ # @return string
+ # @retval - the modified document stringt.
+ #
+ sub collect_languages {
+     my $doc = shift;
+     my %languages;
+     while ($doc =~ /\\selectlanguage{(\w+)}/mg) {
+ 	$languages{$1} = 1;	# allows us to request each language exactly once.
+     }
+     my @lang_list = (keys(%languages)); # List of unique languages
+     if (scalar @lang_list) {
+ 	my $babel_header = '\usepackage[' . join(',', @lang_list) .']{babel}'. "\n";
+ 	$doc =~ s/\\begin{document}/$babel_header\\begin{document}/;
+     }
+     return $doc;
+ }
+ #-------------------------------------------------------------------
  #
  #   ssi_with_retries- Does the server side include of a resource.
- Line 241  sub ssi_with_retries {
+ Line 978  sub ssi_with_retries {
  	$ssi_last_error_resource = $resource;
  	$ssi_last_error          = $response->code . " " . $response->message;
          $content='\section*{!!! An error occurred !!!}';
- 	&Apache::lonnet::logthis("Error in SSI resource: $resource Error: $ssi_last_error");
      }
      return $content;
- Line 257  sub get_student_view_with_retries {
+ Line 993  sub get_student_view_with_retries {
          $ssi_last_error_resource = $curresline.' for user '.$username.':'.$userdomain;
          $ssi_last_error          = $response->code . " " . $response->message;
          $content='\section*{!!! An error occurred !!!}';
-         &Apache::lonnet::logthis("Error in SSI (student view) resource: $curresline Error: $ssi_last_error User: $username:$userdomain");
      }
      return $content;
- Line 322  sub printf_style_subst {
+ Line 1057  sub printf_style_subst {
  sub format_page_header {
      my ($width, $format, $assignment, $course, $student, $section) = @_;
      $width = &recalcto_mm($width); # Get width in mm.
+     my $chars_per_line = int($width/1.6);   # Character/textline.
      #  Default format?
      if ($format eq '') {
- Line 337  sub format_page_header {
+ Line 1075  sub format_page_header {
  	#   but only truncate the course.
  	# - Allow the assignment to be 2 lines (wrapped).
  	#
- 	my $chars_per_line = $width/2; # Character/textline.
  	my $name_length    = int($chars_per_line *3 /4);
  	my $sec_length     = int($chars_per_line / 5);
- Line 372  sub format_page_header {
+ Line 1109  sub format_page_header {
      # there is '\\ \\ ' in the page header. That's cause a error in LaTeX
      if($format =~ /\\\\\s\\\\\s/) {
          #TODO find sensible caption for page header
-         my $testPrintout = '\\\\'.&mt('Construction Space').' \\\\'.&mt('Test-Printout ');
+         my $testPrintout = '\\\\'.&mt('Authoring Space').' \\\\'.&mt('Test-Printout ');
          $format =~ s/\\\\\s\\\\\s/$testPrintout/;
      }
+     #
+     #  We're going to trust LaTeX to break lines appropriately, but
+     #  we'll truncate anything that's more than 3 lines worth of
+     # text.  This is also assuming (which will probably end badly)
+     # nobody's going to embed LaTeX control sequences in the title
+     # header or rather that those control sequences won't get broken
+     # by the stuff below.
+     #
+     my $total_length = 3*$chars_per_line;
+     if (length($format) > $total_length) {
+ 	$format = substr($format, 0, $total_length);
+     }
      return $format;
- Line 498  sub is_code_valid {
+ Line 1247  sub is_code_valid {
      }
  }
+ #
+ # Compare two students by section (Used to sort by section).
+ #
+ #  Implicit inputs,
+ #    $a - The first one
+ #    $b - The second one.
+ #
+ #  Returns:
+ #     a-section cmp b-section
+ #
+ sub compare_sections {
+     my ($u1, $d1, $s1, $n1, $stat1) = split(/:/, $a);
+     my ($u2, $d2, $s2, $n2, $stat2) = split(/:/, $b);
+     return $s1 cmp $s2;
+ }
  #   Compare two students by name.  The students are in the form
  #   returned by the helper:
- Line 1086  sub page_format_transformation {
+ Line 1851  sub page_format_transformation {
      if ($selectionmade eq '4') {
  	if ($choice eq 'all_problems') {
- 	    $assignment='Problems from the Whole Course';
+             $assignment=&mt('Problems from the Whole Course');
  	} else {
- 	    $assignment='Resources from the Whole Course';
+             $assignment=&mt('Resources from the Whole Course');
  	}
      } else {
  	$assignment=&Apache::lonxml::latex_special_symbols($assignment,'header');
- Line 1118  sub page_format_transformation {
+ Line 1883  sub page_format_transformation {
  	    $text =~ s/\\pagestyle{fancy}\\rhead{}\\chead{}\s*\\begin{document}/\\textheight = $textheight\\oddsidemargin = $evenoffset\n\\evensidemargin = $evenoffset $topmargintoinsert\\textwidth= $textwidth\\newlength{\\minipagewidth}\n\\setlength{\\minipagewidth}{\\textwidth\/\$number_of_columns-0\.2cm}\\renewcommand{\\ref}{\\keephidden\}\\pagestyle{fancy}\\rhead{}\\chead{}\\usepackage{booktabs}\\begin{document}\\voffset=-0\.8cm\n\\setcounter{page}{1}  \\vskip 5 mm\n /;
  	}
  	if ($papersize eq 'a4') {
- 	    $text =~ s/(\\begin{document})/$1\\special{papersize=210mm,297mm}/;
+ 	    my $papersize_text;
+ 	    if ($perm{'pav'}) {
+ 		$papersize_text = '\\special{papersize=210mm,297mm}';
+ 	    } else {
+ 		$papersize_text = '\special{papersize=210mm,297mm}';
+ 	    }
+ 	    $text =~ s/(\\begin{document})/$1$papersize_text/;
  	}
      }
      if ($tableofcontents eq 'yes') {$text=~s/(\\setcounter\{page\}\{1\})/$1 \\tableofcontents\\newpage /;}
- Line 1300  sub unsupported {
+ Line 2071  sub unsupported {
      my $result.= &print_latex_header($mode);
      if ($currentURL=~m|^(/adm/wrapper/)?ext/|) {
  	$currentURL=~s|^(/adm/wrapper/)?ext/|http://|;
+         $currentURL=~s|^http://https://|https://|;
  	my $title=&Apache::lonnet::gettitle($symb);
  	$title = &Apache::lonxml::latex_special_symbols($title);
  	$result.=' \strut \\\\ '.$title.' \strut \\\\ '.$currentURL.' ';
- Line 1325  sub map_laystyle {
+ Line 2097  sub map_laystyle {
  sub print_page_in_course {
      my ($helper, $rparmhash, $currentURL, $resources) = @_;
      my %parmhash       = %$rparmhash;
      my @page_resources = @$resources;
      my $mode = $helper->{'VARS'}->{'LATEX_TYPE'};
- Line 1343  sub print_page_in_course {
+ Line 2116  sub print_page_in_course {
      if ($mode ne '') {$mode='\\'.$mode}
-     my $result.= &print_latex_header($mode);
+     my $result   =    &print_latex_header($mode);
      if ($currentURL=~m|^(/adm/wrapper/)?ext/|) {
  	$currentURL=~s|^(/adm/wrapper/)?ext/|http://|;
  	my $title=&Apache::lonnet::gettitle($symb);
  	$title = &Apache::lonxml::latex_special_symbols($title);
      } else {
- 	$result.=$currentURL;
+         my $esc_currentURL= $currentURL;
+         $esc_currentURL =~ s/_/\\_/g;
+ 	$result.=$esc_currentURL;
      }
      $result .= '\\\\';
- Line 1362  sub print_page_in_course {
+ Line 2137  sub print_page_in_course {
      # First is the overall page description.  This is then followed by the
      # components of the page. Each of which must be printed independently.
      my $the_page = shift(@page_resources);
      foreach my $resource (@page_resources) {
  	my $resource_src   = $resource->src(); # Essentially the URL of the resource.
  	$result           .= $resource->title() . '\\\\';
- Line 1376  sub print_page_in_course {
+ Line 2151  sub print_page_in_course {
  	    my @page_resources = $navmap->retrieveResources($resource_src);
  	    $result           .= &print_page_in_course($helper, $rparmhash,
  						       $resource_src, \@page_resources);
+         } elsif ($resource->ext()) {
+             $result .= &unsupported($currentURL,$mode,$symb);
  	}
  	# these resources go through the XML transformer:
- 	elsif ($resource_src =~ /\.(problem|exam|quiz|assess|survey|form|library|page|xml|html|htm\xhtml|xhtm)$/)  {
+ 	elsif ($resource_src =~ /\.(problem|exam|quiz|assess|survey|form|library|xml|html|htm|xhtml|xhtm)$/)  {
  	    my $urlp = &Apache::lonnet::clutter($resource_src);
  	    my %form;
  	    my %moreenv;
- Line 1390  sub print_page_in_course {
+ Line 2169  sub print_page_in_course {
  	    $form{'grade_target'}  = 'tex';
  	    $form{'textwidth'}    = &get_textwidth($helper, $LaTeXwidth);
- 	    $form{'pdfFormFiels'} = $pdfFormFields; #
+ 	    $form{'pdfFormFields'} = $pdfFormFields; #
  	    $form{'showallfoils'} = $helper->{'VARS'}->{'showallfoils'};
  	    $form{'problem_split'}=$parmhash{'problem_stream_switch'};
- Line 1413  sub print_page_in_course {
+ Line 2192  sub print_page_in_course {
  	    my $texversion = &ssi_with_retries($urlp, $ssi_retry_count, %form);
- 	    # There seems to be an extraneous \vskip 1mm \\\\ :
- 	    $texversion =~ s/^\\vskip 1mm \\\\\\\\//;
  	    # current document with answers.. no need to encap in minipage
  	    #  since there's only one answer.
- Line 1438  sub print_page_in_course {
+ Line 2214  sub print_page_in_course {
  		if ($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') {
  		    $texversion=~s/(\\keephidden{ENDOFPROBLEM})/$answer$1/;
  		} else {
- 		    $texversion=&print_latex_header($helper->{'VARS'}->{'LATEX_TYPE'});
+ 		    $texversion= &print_latex_header($helper->{'VARS'}->{'LATEX_TYPE'});
  		    if ($helper->{'VARS'}->{'construction'} ne '1') {
  			my $title = &Apache::lonnet::gettitle($helper->{'VARS'}->{'symb'});
  			$title = &Apache::lonxml::latex_special_symbols($title);
  			$texversion.='\vskip 0 mm \noindent\textbf{'.$title.'}\vskip 0 mm ';
  			$texversion.=&path_to_problem($urlp,$LaTeXwidth);
  		    } else {
- 			$texversion.='\vskip 0 mm \noindent\textbf{Prints from construction space - there is no title.}\vskip 0 mm ';
+ 			$texversion.='\vskip 0 mm \noindent\textbf{'.
- 			my $URLpath=$urlp;
+                         &mt("Printing from Authoring Space: No Title").'}\vskip 0 mm ';
- 			$URLpath=~s/~([^\/]+)/public_html\/$1\/$1/;
+ 			$texversion.=&path_to_problem($urlp,$LaTeXwidth);
- 			$texversion.=&path_to_problem($URLpath,$LaTeXwidth);
  		    }
  		    $texversion.='\vskip 1 mm '.$answer.'\end{document}';
  		}
- Line 1473  sub print_page_in_course {
+ Line 2248  sub print_page_in_course {
  		$texversion=~s/(\\addcontentsline\{toc\}\{subsection\}\{[^\}]*\})/$1 URL: \\verb|$currentURL| \\strut\\\\\\strut /;
  	    }
+ 	    $texversion = &latex_header_footer_remove($texversion);
+ 	    # the first remaining line is a comment from londefdef the second
+ 	    # line  seems to be an extraneous \vskip 1mm \\\\ :
+             # (imperfect removal from header_footer_remove?
+ 	    $texversion =~ s/\\vskip 1mm \\\\\\\\//;
  	    $result .= $texversion;
  	    if ($currentURL=~m/\.page\s*$/) {
  		($result,$numberofcolumns) = &page_cleanup($result);
- Line 1489  sub print_page_in_course {
+ Line 2272  sub print_page_in_course {
  # List of recently generated print files
  #
  sub recently_generated {
-     my $r=shift;
+     my ($prtspool) = @_;
-     my $prtspool=$r->dir_config('lonPrtDir');
+     my $output;
      my $zip_result;
      my $pdf_result;
      opendir(DIR,$prtspool);
- Line 1523  sub recently_generated {
+ Line 2306  sub recently_generated {
  	if ($ext eq 'zip') { $zip_result .= $result; }
      }
      if ($zip_result || $pdf_result) {
-         $r->print('<hr />');
+         $output ='<hr />';
      }
      if ($zip_result) {
- 	$r->print('<h3>'.&mt('Recently generated printout zip files')."</h3>\n"
+ 	$output .='<h3>'.&mt('Recently generated printout zip files')."</h3>\n"
                    .&Apache::loncommon::start_data_table()
                    .&Apache::loncommon::start_data_table_header_row()
                    .'<th>'.&mt('Download').'</th>'
- Line 1534  sub recently_generated {
+ Line 2317  sub recently_generated {
                    .'<th>'.&mt('File Size (Bytes)').'</th>'
                    .&Apache::loncommon::end_data_table_header_row()
                    .$zip_result
-                   .&Apache::loncommon::end_data_table()
+                   .&Apache::loncommon::end_data_table();
-         );
      }
      if ($pdf_result) {
- 	$r->print('<h3>'.&mt('Recently generated printouts')."</h3>\n"
+ 	$output .='<h3>'.&mt('Recently generated printouts')."</h3>\n"
                    .&Apache::loncommon::start_data_table()
                    .&Apache::loncommon::start_data_table_header_row()
                    .'<th>'.&mt('Download').'</th>'
- Line 1546  sub recently_generated {
+ Line 2328  sub recently_generated {
                    .'<th>'.&mt('File Size (Bytes)').'</th>'
                    .&Apache::loncommon::end_data_table_header_row()
                    .$pdf_result
-                   .&Apache::loncommon::end_data_table()
+                   .&Apache::loncommon::end_data_table();
-         );
      }
+     return $output;
  }
  #
- Line 1560  sub recently_generated {
+ Line 2342  sub recently_generated {
  #    A reference to a page break hash.
  #
  #
- #use Data::Dumper;
+ # use Data::Dumper;
- #sub dump_helper_vars {
+ # sub dump_helper_vars {
  #    my ($helper) = @_;
  #    my $helpervars = Dumper($helper->{'VARS'});
  #    &Apache::lonnet::logthis("Dump of helper vars:\n $helpervars");
- Line 1576  sub get_page_breaks  {
+ Line 2358  sub get_page_breaks  {
      }
      return %page_breaks;
  }
+ #
+ #   Returns text to insert for any extra vskip prior to the resource.
+ #   Parameters:
+ #     helper   - Reference to the helper object driving the printout.
+ #     resource - Identifies the resource about to be printed.
+ #
+ #   This is done as follows:
+ #    POSSIBLE_RESOURCES has the list of possible resources.
+ #    EXTRASPACE         has the list of extra space values.
+ #    EXTRASPACE_UNITS   is the set of resources for which the units are
+ #                       mm. All others are 'in'.
+ #
+ #    The resource is found in the POSSIBLE_RESOURCES to get the index
+ #    of the EXTRASPACE value.
+ #
+ #   In order to speed this up for lengthy printouts, the first time,
+ #   POSSIBLE_RESOURCES is turned into a look up hash and
+ #   EXTRASPACE is turned into an array.
+ #
+ my %possible_resources;
+ my %extraspace_mm;
+ my @extraspace;
+ my $skips_loaded       = 0;
+ #  Function to load the skips hash and array
+ sub load_skips {
+     my ($helper)  = @_;
+     #  If this is the first time, unrap the resources and extra spaces:
+     if (!$skips_loaded) {
+ 	@extraspace = (split(/\|\|\|/, $helper->{'VARS'}->{'EXTRASPACE'}));
+ 	my @resource_list = (split(/\|\|\|/, $helper->{'VARS'}->{'POSSIBLE_RESOURCES'}));
+ 	my $i = 0;
+ 	foreach my $resource (@resource_list) {
+ 	    $possible_resources{$resource} = $i;
+ 	    $i++;
+ 	}
+ 	foreach my $mm_resource (split(/\|\|\|/, $helper->{'VARS'}->{'EXTRASPACE_UNITS'})) {
+ 	    $extraspace_mm{$mm_resource} = 1;
+ 	}
+ 	$skips_loaded = 1;
+     }
+ }
+ sub get_extra_vspaces {
+     my ($helper, $resource) = @_;
+     &load_skips($helper);
+     #  Lookup the resource in the possible resources hash.. that is the index
+     # into the extraspace array that gives us either an empty string or
+     # the number of mm to skip:
+     my $index = $possible_resources{$resource};
+     my $skip  = $extraspace[$index];
+     my $result = '';
+     if ($skip ne '') {
+ 	my $units = 'in';
+ 	if (defined($extraspace_mm{$resource})) {
+ 	    $units = 'mm';
+ 	}
+ 	$result = '\vskip '.$skip.' '.$units;
+     }
+     return $result;
+ }
+ #
+ #  The resource chooser part of the helper needs more than just
+ #  the value of the extraspaces var to recover the value into a text
+ #  field option.  This sub produces the required format for the saved var:
+ #  specifically
+ #    ||| separated fields of the form resourcename=value
+ #
+ #  Parameters:
+ #    $helper     - Refers to the helper we are configuring
+ #  Implicit input:
+ #     $helper->{'VARS'}->{'EXTRASPACE'}  - the spaces helper var has the text field
+ #                                          value.
+ #     $helper->{'VARS'}->{'EXTRASPACE_UNITS'} - units for the skips (checkboxes).
+ #     $helper->{'VARS'}->{'POSSIBLE_RESOURCES'}  - has the list of resources. |||
+ #                                          separated of course.
+ #  Implicit outputs:
+ #     $env{'form.extraspace'}
+ #     $env{'form.extraspace_units'}
+ #
+ sub set_form_extraspace {
+     my ($helper) = @_;
+     # the most convenient way to do this is to drive from the skips arrays/hash.
+     # may not be the fastest, but this is once per print request so it's not so
+     # speed critical:
+     &load_skips($helper);
+     my $result = '';
+     foreach my $resource (keys(%possible_resources)) {
+ 	my $vskip = $extraspace[$possible_resources{$resource}];
+ 	$result  .= $resource .'=' . $vskip . '|||';
+     }
+     $env{'form.extraspace'}  = $result;
+     $env{'form.extraspace_units'} = $helper->{'VARS'}->{'EXTRASPACE_UNITS'};
+     return $result;
+ }
  #  Output a sequence (recursively if neeed)
  #  from construction space.
- Line 1592  sub get_page_breaks  {
+ Line 2490  sub get_page_breaks  {
  #
  sub print_construction_sequence {
      my ($currentURL, $helper, %form, $LaTeXwidth) = @_;
      my $result;
      my $rndseed=time;
      if ($helper->{'VARS'}->{'curseed'}) {
  	$rndseed=$helper->{'VARS'}->{'curseed'};
      }
-     my $errtext=&LONCAPA::map::mapread($currentURL);
+     my $errtext=&LONCAPA::map::mapread(&Apache::lonnet::filelocation('',$currentURL));
      #
      #  These make this all support recursing for subsequences.
      #
      my @order    = @LONCAPA::map::order;
      my @resources = @LONCAPA::map::resources;
      for (my $member=0;$member<=$#order;$member++) {
  	$resources[$order[$member]]=~/^([^:]*):([^:]*):/;
  	my $urlp=$2;
- Line 1618  sub print_construction_sequence {
+ Line 2519  sub print_construction_sequence {
  	    }
  	    if((($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') ||
  		($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'only')) &&
- 	       ($urlp=~/\.(problem|exam|quiz|assess|survey|form|library|page)$/)) {
+ 	       ($urlp=~/$LONCAPA::assess_page_re/)) {
  		#  Don't permanently modify %$form...
  		my %answerform = %form;
  		$answerform{'grade_target'}='answer';
- Line 1662  sub print_construction_sequence {
+ Line 2563  sub print_construction_sequence {
  	    # IF sequence, recurse:
  	    if ($urlp =~ /\.sequence$/) {
- 		my $sequence_url = $urlp;
+ 		$result .= &print_construction_sequence($urlp,
- 		my $domain       = $env{'user.domain'};	# Constr. space only on local
- 		my $user         = $env{'user.name'};
- 		$sequence_url    =~ s/^\/res\/$domain/\/home/;
- 		$sequence_url    =~ s/^(\/home\/$user)/$1\/public_html/;
- #		$sequence_url    =~ s|\/~([^\/]+)\/|\/home\/$1\/public_html\/|;
- 		$result .= &print_construction_sequence($sequence_url,
  							$helper, %form,
  							$LaTeXwidth);
  	    }
- Line 1693  sub print_construction_sequence {
+ Line 2587  sub print_construction_sequence {
      return $result;
  }
+ #
+ #  Top level for generating print output.
+ #
+ #  May call print_resources if multiple resources will be printed.
+ #
+ #  The main driver is $selectionmade which reflects the type of print out
+ #  requested:
+ #   Value    Print type:
+ #   1        Print resource that's being looked at.
+ #   2        Print problems in a map or in a page.
+ #   3        Print pages in a map or resources in a page.
+ #   4        Print all problems  or all resources.
+ #   5        Print problems for seleted students.
+ #   6        Print selected problems from a folder.
+ #   7        Print print selected resources from some scope.
+ #   8        Print resources for selected students.
+ #
+ #BZ 5209
+ #   2        map_incomplete_problems_seq Print incomplete problems from the current
+ #            folder in student context.
+ #   5      map_incomplete_problems_people_seq Print incomplete problems from the
+ #            current folder in privileged context.
+ #    5      incomplete_problems_selpeople_course Print incomplete problems for
+ #            selected people from the entire course.
+ #
+ #   Item 101 has much the same processing as 8,
+ #
+ #  Differences:  Item 101, 102 require per-student filtering of the resource
+ #  set so that only the incomplete resources are printed.
+ #  For item 100, filtering was done at the helper level.
  sub output_data {
      my ($r,$helper,$rparmhash) = @_;
      my %parmhash = %$rparmhash;
      $ssi_error = 0;		# This will be set nonzero by failing ssi's.
      $resources_printed = '';
      $font_size = $helper->{'VARS'}->{'fontsize'};
+     my $print_type = $helper->{'VARS'}->{'PRINT_TYPE'}; # Allows textual simplification.
      my $do_postprocessing = 1;
      my $js = <<ENDPART;
  <script type="text/javascript">
- Line 1747  ENDPART
+ Line 2674  ENDPART
      # indexed by symb and contains 1's for each break.
      $env{'form.pagebreaks'}  = $helper->{'VARS'}->{'FINISHPAGE'};
-     $env{'form.lastprinttype'} = $helper->{'VARS'}->{'PRINT_TYPE'};
+     &set_form_extraspace($helper);
+     $env{'form.lastprinttype'} = $print_type;
      &Apache::loncommon::store_course_settings('print',
  					      {'pagebreaks'    => 'scalar',
+ 					       'extraspace'    => 'scalar',
+ 					       'extraspace_units' => 'scalar',
  					       'lastprinttype' => 'scalar'});
      my %page_breaks  = &get_page_breaks($helper);
      my $format_from_helper = $helper->{'VARS'}->{'FORMAT'};
- Line 1796  ENDPART
+ Line 2725  ENDPART
  	&Apache::lonnet::delenv('construct.style');
      }
+     if ($print_type eq 'current_document') {
-     if ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'current_document') {
        #-- single document - problem, page, html, xml, ...
  	my ($currentURL,$cleanURL);
- Line 1808  ENDPART
+ Line 2736  ENDPART
  	} else {
              #prints resource from the construction space
- 	    $currentURL='/'.$helper->{'VARS'}->{'filename'};
+ 	    $currentURL=$helper->{'VARS'}->{'filename'};
- 	    if ($currentURL=~/([^?]+)/) {$currentURL=$1;}
  	    $cleanURL=$currentURL;
  	}
  	$selectionmade = 1;
  	if ($cleanURL!~m|^/adm/|
  	    && $cleanURL=~/\.(problem|exam|quiz|assess|survey|form|library|xml|html|htm|xhtml|xhtm)$/) {
  	    my $rndseed=time;
- Line 1852  ENDPART
+ Line 2780  ENDPART
  	    if(($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') ||
  	       ($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'only')) {
  		$form{'problem_split'}=$parmhash{'problem_stream_switch'};
  		$form{'grade_target'}='answer';
  		$form{'answer_output_mode'}='tex';
- Line 1873  ENDPART
+ Line 2802  ENDPART
  			$texversion.='\vskip 0 mm \noindent\textbf{'.$title.'}\vskip 0 mm ';
  			$texversion.=&path_to_problem($cleanURL,$LaTeXwidth);
  		    } else {
- 			$texversion.='\vskip 0 mm \noindent\textbf{Prints from construction space - there is no title.}\vskip 0 mm ';
+ 			$texversion.='\vskip 0 mm \noindent\textbf{'.
- 			my $URLpath=$cleanURL;
+                         &mt("Printing from Authoring Space: No Title").'}\vskip 0 mm ';
- 			$URLpath=~s/~([^\/]+)/public_html\/$1\/$1/;
- 			$texversion.=&path_to_problem($URLpath,$LaTeXwidth);
+ 			$texversion.=&path_to_problem($cleanURL,$LaTeXwidth);
  		    }
  		    $texversion.='\vskip 1 mm '.$answer.'\end{document}';
  		}
- Line 1908  ENDPART
+ Line 2837  ENDPART
  	    }
          } elsif ($cleanURL!~m|^/adm/|
  		 && $currentURL=~/\.(sequence|page)$/ && $helper->{'VARS'}->{'construction'} eq '1') {
-             #printing content of sequence from the construction space
- 	    $currentURL=~s|\/~([^\/]+)\/|\/home\/$1\/public_html\/|;
- #	    $result .= &print_latex_header($helper->{'VARS'}->{'LATEX_TYPE'});
  	    $result .= &print_construction_sequence($currentURL, $helper, %form,
  						    $LaTeXwidth);
  	    $result .= '\end{document}';
- Line 1924  ENDPART
+ Line 2848  ENDPART
  		$form{'latex_type'}=$helper->{'VARS'}->{'LATEX_TYPE'};
  		if ($currentURL=~/\/syllabus$/) {$currentURL=~s/\/res//;}
  		$resources_printed .= $currentURL.':';
- 		my $texversion=&ssi_with_retries($currentURL, $ssi_retry_count, %form);
+ 		my $texversion = &ssi_with_retries($currentURL, $ssi_retry_count, %form);
  		if ($helper->{'VARS'}->{'PRINT_ANNOTATIONS'} eq 'yes') {
  		    my $annotation = &annotate($currentURL);
  		    $texversion    =~ s/(\\end{document})/$annotation$1/;
- Line 1957  ENDPART
+ Line 2881  ENDPART
  	} else {
- 	    &Apache::lonnet::logthis("Unsupported type handler");
  	    $result.=&unsupported($currentURL,$helper->{'VARS'}->{'LATEX_TYPE'},
  				  $helper->{'VARS'}->{'symb'});
  	}
-     } elsif (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'map_problems')       or
+     } elsif (($print_type eq 'map_problems')          or
-              ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'map_problems_pages') or
+ 	     ($print_type eq 'map_problems_in_page')  or
-              ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'all_problems')       or
+ 	     ($print_type eq 'map_resources_in_page') or
- 	     ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'all_resources')      or # BUGBUG
+              ($print_type eq 'map_problems_pages')    or
- 	     ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'select_sequences')
+              ($print_type eq 'all_problems')          or
- 	     ) {
+ 	     ($print_type eq 'all_resources')         or # BUGBUG
+ 	     ($print_type eq 'select_sequences')      or
+ 	     ($print_type eq 'map_incomplete_problems_seq')
+ 	     ) {
          #-- produce an output string
- 	if ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'map_problems') {
+ 	if (($print_type eq 'map_problems')                or
+ 	    ($print_type eq 'map_incomplete_problems_seq') or
+ 	    ($print_type eq 'map_problems_in_page') ) {
  	    $selectionmade = 2;
- 	} elsif ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'map_problems_pages') {
+ 	} elsif (($print_type eq 'map_problems_pages') or
+ 		 ($print_type eq 'map_resources_in_page'))
+ 	{
  	    $selectionmade = 3;
- 	} elsif (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'all_problems')
+ 	} elsif (($print_type eq 'all_problems')
  		 ) {
  	    $selectionmade = 4;
- 	} elsif ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'all_resources') {  #BUGBUG
+ 	} elsif ($print_type eq 'all_resources') {  #BUGBUG
  	    $selectionmade = 4;
- 	} elsif ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'select_sequences') {
+ 	} elsif ($print_type eq 'select_sequences') {
  	    $selectionmade = 7;
  	}
  	$form{'problem_split'}=$parmhash{'problem_stream_switch'};
  	$form{'suppress_tries'}=$parmhash{'suppress_tries'};
  	$form{'latex_type'}=$helper->{'VARS'}->{'LATEX_TYPE'};
- Line 2012  ENDPART
+ Line 2942  ENDPART
  		    $result.="\\newpage\n";
  		}
  	    }
+ 	    $result .= &get_extra_vspaces($helper, $master_seq[$i]);
  	    my ($sequence,$middle_thingy,$urlp)=&Apache::lonnet::decode_symb($master_seq[$i]);
  	    $urlp=&Apache::lonnet::clutter($urlp);
  	    $form{'symb'}=$master_seq[$i];
  	    my $assignment=&Apache::lonxml::latex_special_symbols(&Apache::lonnet::gettitle($sequence),'header'); #title of the assignment which contains this problem
  	    if ($selectionmade==7) {$helper->{VARS}->{'assignment'}=$assignment;}
- Line 2026  ENDPART
+ Line 2956  ENDPART
  		&& $urlp=~/\.(problem|exam|quiz|assess|survey|form|library|page|xml|html|htm|xhtml|xhtm)$/) {
  		$resources_printed .= $urlp.':';
  		&Apache::lonxml::remember_problem_counter();
+ 		if ($flag_latex_header_remove eq 'NO') {
+ 		    $texversion.=&print_latex_header($helper->{'VARS'}->{'LATEX_TYPE'});  # RF
+                     unless (($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'only') ||
+                             (($i==0) &&
+                              (($urlp=~/\.page$/) ||
+                               ($print_type eq 'map_problems_in_page') ||
+                               ($print_type eq 'map_resources_in_page')))) {
+                         $flag_latex_header_remove = 'YES';
+                     }
+ 		}
  		$texversion.=&ssi_with_retries($urlp, $ssi_retry_count, %form);
  		if ($urlp=~/\.page$/) {
  		    ($texversion,my $number_of_columns_page) = &page_cleanup($texversion);
  		    if ($number_of_columns_page > $number_of_columns) {$number_of_columns=$number_of_columns_page;}
  		    $texversion =~ s/\\end{document}\d*/\\end{document}/;
  		    $flag_page_in_sequence = 'YES';
  		}
  		if(($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') ||
  		   ($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'only')) {
- Line 2045  ENDPART
+ Line 2984  ENDPART
  		    &Apache::lonxml::restore_problem_counter();
  		    my $answer=&ssi_with_retries($urlp, $ssi_retry_count, %answerform);
+                     if ($urlp =~ /\.page$/) {
+                         $answer =~ s/\\end{document}(\d*)$//;
+                     }
  		    if ($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') {
- 			$texversion=~s/(\\keephidden{ENDOFPROBLEM})/$answer$1/;
+                         if ($urlp =~ /\.page$/) {
+                             my @probs = split(/\\keephidden{ENDOFPROBLEM}/,$texversion);
+                             my $lastprob = pop(@probs);
+                             $texversion = join('\keephidden{ENDOFPROBLEM}',@probs).
+                             $answer.'\keephidden{ENDOFPROBLEM}'.$lastprob;
+                         } else {
+                             $texversion=~s/(\\keephidden{ENDOFPROBLEM})/$answer$1/;
+                         }
  		    } else {
- 			if ($urlp=~/\.(problem|exam|quiz|assess|survey|form|library)$/) {
+ 			if ($urlp=~/$LONCAPA::assess_page_re/) {
  			    $texversion=&print_latex_header($helper->{'VARS'}->{'LATEX_TYPE'});
- 			    $texversion =~ s/\\begin{document}//;
+ #			    $texversion =~ s/\\begin{document}//; # FIXME
  			    my $title = &Apache::lonnet::gettitle($master_seq[$i]);
  			    $title = &Apache::lonxml::latex_special_symbols($title);
  			    my $body ='\vskip 0 mm \noindent\textbf{'.$title.'}\vskip 0 mm ';
- Line 2087  ENDPART
+ Line 3035  ENDPART
  							  $assignment,
  							  $courseidinfo,
  							  $name);
  		    if ($numberofcolumns eq '1') {
  			$result .='\newpage \noindent\parbox{\minipagewidth}{\noindent\\lhead{'.$header_text.'}} \vskip 5 mm ';
  		    } else {
- Line 2100  ENDPART
+ Line 3047  ENDPART
  		$form{'latex_type'}=$helper->{'VARS'}->{'LATEX_TYPE'};
  		if ($urlp=~/\/syllabus$/) {$urlp=~s/\/res//;}
  		$resources_printed .= $urlp.':';
- 		my $texversion=&ssi_with_retries($urlp, $ssi_retry_count, %form);
+ 		my $texversion = &ssi_with_retries($urlp, $ssi_retry_count, %form);
  		if ($helper->{'VARS'}->{'PRINT_ANNOTATIONS'} eq 'yes') {
  		    my $annotation = &annotate($urlp);
  		    $texversion =~ s/(\\end{document)/$annotation$1/;
- Line 2117  ENDPART
+ Line 3064  ENDPART
  		if ($i > 0) {
  		    $result .= '\cleardoublepage';
  		}
- 		$result .= &include_pdf($urlp);
+                 my $texfrompdf = &include_pdf($urlp);
+                 if ($flag_latex_header_remove ne 'NO') {
+                     $texfrompdf = &latex_header_footer_remove($texfrompdf);
+                 }
+                 $result .= $texfrompdf;
  		if ($i != $#master_seq) {
  		    if ($numberofcolumns eq '1') {
  			$result .= '\newpage';
- Line 2140  ENDPART
+ Line 3091  ENDPART
  		}
  		$result .= $texversion;
  		$flag_latex_header_remove = 'YES';
  	    }
  	    if (&Apache::loncommon::connection_aborted($r)) {
  		last;
  	    }
- Line 2150  ENDPART
+ Line 3101  ENDPART
  	    $result =~ s/\\usepackage{calc}/\\usepackage{calc}\\usepackage{longtable}/;
  	}
  	$result .= '\end{document}';
-      } elsif (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_students') ||
+      } elsif (($print_type eq 'problems_for_students')           ||
- 	      ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'all_problems_students') ||
+ 	      ($print_type eq 'problems_for_students_from_page') ||
- 	      ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'resources_for_students')){
+ 	      ($print_type eq 'all_problems_students')           ||
+ 	      ($print_type eq 'resources_for_students')          ||
+ 	      ($print_type eq 'incomplete_problems_selpeople_course') ||
+ 	      ($print_type eq 'map_incomplete_problems_people_seq')){
       #-- prints assignments for whole class or for selected students
  	 my $type;
- 	 if (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_students') ||
+ 	 if (($print_type eq 'problems_for_students')           ||
- 	     ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'all_problems_students') ) {
+ 	     ($print_type eq 'problems_for_students_from_page') ||
+ 	     ($print_type eq 'all_problems_students')           ||
+ 	     ($print_type eq 'incomplete_problems_selpeople_course') ||
+ 	     ($print_type eq 'map_incomplete_problems_people_seq')) {
  	     $selectionmade=5;
  	     $type='problems';
- 	 } elsif ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'resources_for_students') {
+ 	 } elsif ($print_type eq 'resources_for_students') {
  	     $selectionmade=8;
  	     $type='resources';
  	 }
- Line 2178  ENDPART
+ Line 3135  ENDPART
  	 if (($helper->{'VARS'}->{'student_sort'}    eq 1)  &&
  	     ($helper->{'VARS'}->{'SPLIT_PDFS'} ne "sections")) {
  	     @students = sort compare_names  @students;
+ 	 } else {
+ 	     @students = sort compare_sections @students;
  	 }
  	 &adjust_number_to_print($helper);
- Line 2196  ENDPART
+ Line 3155  ENDPART
  	 }
  	 my @master_seq=split /\|\|\|/, $helper->{'VARS'}->{'RESOURCES'};
+          my $map;
+          if ($helper->{VARS}->{'symb'}) {
+              ($map, my $id, my $resource) =
+                  &Apache::lonnet::decode_symb($helper->{VARS}->{'symb'});
+          }
  	 #loop over students
- 	 my $flag_latex_header_remove = 'NO';
+  	 my $flag_latex_header_remove = 'NO';
  	 my %moreenv;
           $moreenv{'instructor_comments'}='hide';
  	 $moreenv{'textwidth'}=&get_textwidth($helper,$LaTeXwidth);
- Line 2209  ENDPART
+ Line 3175  ENDPART
  	     ($helper->{'VARS'}->{'PRINT_ANNOTATIONS'} eq 'yes')) {
  	     $moreenv{'problem_split'}='yes';
  	 }
- 	 my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin($r,'Print Status','Class Print Status',$#students+1,'inline','75');
+ 	 my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin($r,$#students+1);
  	 my $student_counter=-1;
  	 my $i = 0;
  	 my $last_section = (split(/:/,$students[0]))[2];
  	 foreach my $person (@students) {
               my $duefile="/home/httpd/prtspool/$env{'user.name'}_$env{'user.domain'}_printout.due";
  	     if (-e $duefile) {
  		 my $temp_file = Apache::File->new('>>'.$duefile);
- Line 2230  ENDPART
+ Line 3195  ENDPART
  	     } else {
  		 $i=int($student_counter/$helper->{'VARS'}{'NUMBER_TO_PRINT'});
  	     }
+ 	     my $actual_seq = master_seq_to_person_seq($map, \@master_seq,
+                                                        $person, undef, 1);
  	     my ($output,$fullname, $printed)=&print_resources($r,$helper,
  						     $person,$type,
- 						     \%moreenv,\@master_seq,
+ 						     \%moreenv,  $actual_seq,
  						     $flag_latex_header_remove,
  						     $LaTeXwidth);
  	     $resources_printed .= ":";
  	     $print_array[$i].=$output;
  	     $student_names[$i].=$person.':'.$fullname.'_END_';
- 	     &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,&mt('last student').' '.$fullname);
+ #	     &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,&mt('last student').' '.$fullname);
+ 	     &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,'last student');
  	     $flag_latex_header_remove = 'YES';
  	     if (&Apache::loncommon::connection_aborted($r)) { last; }
  	 }
  	 &Apache::lonhtmlcommon::Close_PrgWin($r,\%prog_state);
  	 $result .= $print_array[0].'  \end{document}';
-      } elsif (($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_for_anon')     ||
+      } elsif (($print_type eq 'problems_for_anon')      ||
- 	      ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'resources_for_anon')  ) {
+ 	      ($print_type eq 'problems_for_anon_page') ||
+ 	      ($print_type eq 'resources_for_anon')  ) {
  	 my $cdom =$env{'course.'.$env{'request.course.id'}.'.domain'};
  	 my $cnum =$env{'course.'.$env{'request.course.id'}.'.num'};
  	 my $num_todo=$helper->{'VARS'}->{'NUMBER_TO_PRINT_TOTAL'};
- Line 2253  ENDPART
+ Line 3222  ENDPART
  	 my $old_name=$helper->{'VARS'}->{'REUSE_OLD_CODES'};
  	 my $single_code = $helper->{'VARS'}->{'SINGLE_CODE'};
  	 my $selected_code = $helper->{'VARS'}->{'CODE_SELECTED_FROM_LIST'};
  	 my $code_option=$helper->{'VARS'}->{'CODE_OPTION'};
           my @lines = &Apache::grades::get_scantronformat_file();
- 	 my ($code_type,$code_length)=('letter',6);
+ 	 my ($code_type,$code_length,$bubbles_per_row)=('letter',6,10);
  	 foreach my $line (@lines) {
- 	     my ($name,$type,$length) = (split(/:/,$line))[0,2,4];
+              chomp($line);
+ 	     my ($name,$type,$length,$bubbles_per_item) =
+                  (split(/:/,$line))[0,2,4,17];
  	     if ($name eq $code_option) {
  		 $code_length=$length;
  		 if ($type eq 'number') { $code_type = 'number'; }
+                  chomp($bubbles_per_item);
+                  if (($bubbles_per_item ne '') && ($bubbles_per_item > 0)) {
+                      $bubbles_per_row = $bubbles_per_item;
+                  }
  	     }
  	 }
+          my ($randomorder,$randompick,$map);
+          if ($helper->{VARS}{'symb'}) {
+              ($map, my $id, my $resource) =
+                  &Apache::lonnet::decode_symb($helper->{VARS}{'symb'});
+              my $navmap = Apache::lonnavmaps::navmap->new();
+              if (defined($navmap)) {
+                  if ($map) {
+                      my $mapres = $navmap->getResourceByUrl($map);
+                      $randomorder = $mapres->randomorder();
+                      $randompick = $mapres->randompick();
+                  }
+              }
+          }
  	 my %moreenv = ('textwidth' => &get_textwidth($helper,$LaTeXwidth));
  	 $moreenv{'problem_split'}    = $parmhash{'problem_stream_switch'};
           $moreenv{'instructor_comments'}='hide';
+          $moreenv{'bubbles_per_row'} = $bubbles_per_row;
  	 my $seed=time+($$<<16)+($$);
  	 my @allcodes;
  	 if ($old_name) {
- Line 2307  ENDPART
+ Line 3295  ENDPART
  	     @allcodes=keys(%allcodes);
  	 }
  	 my @master_seq=split /\|\|\|/, $helper->{'VARS'}->{'RESOURCES'};
- 	 my ($type) = split(/_/,$helper->{'VARS'}->{'PRINT_TYPE'});
+ 	 my ($type) = split(/_/,$print_type);
  	 &adjust_number_to_print($helper);
  	 my $number_per_page=$helper->{'VARS'}->{'NUMBER_TO_PRINT'};
- 	 if ($number_per_page eq '0' || $number_per_page eq 'all') {
+ 	 if ($number_per_page eq '0' || $number_per_page eq 'all'
- 	     $number_per_page=$num_todo;
+ 	     || $number_per_page eq 'section') {
+ 	     $number_per_page=$num_todo > 0 ? $num_todo : 1;
  	 }
  	 my $flag_latex_header_remove = 'NO';
- 	 my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin($r,'Print Status','Class Print Status',$num_todo,'inline','75');
+ 	 my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin($r,$num_todo);
  	 my $count=0;
  	 foreach my $code (sort(@allcodes)) {
  	     my $file_num=int($count/$number_per_page);
- Line 2323  ENDPART
+ Line 3312  ENDPART
  	     } else {
  		 $moreenv{'CODE'}=&num_to_letters($code);
  	     }
+              my $actual_seq = \@master_seq;
+              if ($randomorder || $randompick) {
+                  $env{'form.CODE'} = $moreenv{'CODE'};
+                  $actual_seq = master_seq_to_person_seq($map, \@master_seq,
+                                                         undef,
+                                                         $moreenv{'CODE'}, 1);
+                  delete($env{'form.CODE'});
+              }
  	     my ($output,$fullname, $printed)=
  		 &print_resources($r,$helper,'anonymous',$type,\%moreenv,
- 				  \@master_seq,$flag_latex_header_remove,
+ 				  $actual_seq,$flag_latex_header_remove,
  				  $LaTeXwidth);
  	     $resources_printed .= ":";
  	     $print_array[$file_num].=$output;
- Line 2337  ENDPART
+ Line 3334  ENDPART
  	 }
  	 &Apache::lonhtmlcommon::Close_PrgWin($r,\%prog_state);
  	 $result .= $print_array[0].'  \end{document}';
-      } elsif ($helper->{'VARS'}->{'PRINT_TYPE'} eq 'problems_from_directory') {
+      } elsif ($print_type eq 'problems_from_directory') {
      #prints selected problems from the subdirectory
  	$selectionmade = 6;
          my @list_of_files=split /\|\|\|/, $helper->{'VARS'}->{'FILES'};
- Line 2356  ENDPART
+ Line 3353  ENDPART
  	    if ($urlp=~/\//) {
  		$form{'problem_split'}=$parmhash{'problem_stream_switch'};
  		$form{'rndseed'}=$rndseed;
- 		if ($urlp =~ m|/home/([^/]+)/public_html|) {
+ 		$urlp =~ s|^$Apache::lonnet::perlvar{'lonDocRoot'}||;
- 		    $urlp =~ s|/home/([^/]*)/public_html|/~$1|;
- 		} else {
- 		    $urlp =~ s|^$Apache::lonnet::perlvar{'lonDocRoot'}||;
- 		}
  		$resources_printed .= $urlp.':';
  		my $texversion=&ssi_with_retries($urlp, $ssi_retry_count, %form);
  		if(($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') ||
- Line 2381  ENDPART
+ Line 3374  ENDPART
  			    $texversion.='\vskip 0 mm \noindent ';
  			    $texversion.=&path_to_problem ($urlp,$LaTeXwidth);
  			} else {
- 			    $texversion.='\vskip 0 mm \noindent\textbf{Prints from construction space - there is no title.}\vskip 0 mm ';
+ 			    $texversion.='\vskip 0 mm \noindent\textbf{'.
- 			    my $URLpath=$urlp;
+                                          &mt("Printing from Authoring Space: No Title").'}\vskip 0 mm ';
- 			    $URLpath=~s/~([^\/]+)/public_html\/$1\/$1/;
+ 			    $texversion.=&path_to_problem ($urlp,$LaTeXwidth);
- 			    $texversion.=&path_to_problem ($URLpath,$LaTeXwidth);
  			}
  			$texversion.='\vskip 1 mm '.$answer.'\end{document}';
  		    }
  		}
                  #this chunk is responsible for printing the path to problem
- 		my $newurlp=$urlp;
+ 		my $newurlp=&path_to_problem($urlp,$LaTeXwidth);
- 		if ($newurlp=~/~/) {$newurlp=~s|\/~([^\/]+)\/|\/home\/$1\/public_html\/|;}
- 		$newurlp=&path_to_problem($newurlp,$LaTeXwidth);
  		$texversion =~ s/(\\begin{minipage}{\\textwidth})/$1 $newurlp/;
  		if ($flag_latex_header_remove ne 'NO') {
  		    $texversion = &latex_header_footer_remove($texversion);
- Line 2419  ENDPART
+ Line 3409  ENDPART
      # Only post process if that has not been turned off e.g. by a raw latex resource.
      if ($do_postprocessing) {
- 	$result = &page_format_transformation($papersize,$laystyle,$numberofcolumns,$helper->{'VARS'}->{'PRINT_TYPE'},$result,$helper->{VARS}->{'assignment'},$helper->{'VARS'}->{'TABLE_CONTENTS'},$helper->{'VARS'}->{'TABLE_INDEX'},$selectionmade);
+ 	$result = &page_format_transformation($papersize,
+ 					      $laystyle,$numberofcolumns,
+ 					      $print_type,$result,
+ 					      $helper->{VARS}->{'assignment'},
+ 					      $helper->{'VARS'}->{'TABLE_CONTENTS'},
+ 					      $helper->{'VARS'}->{'TABLE_INDEX'},
+ 					      $selectionmade);
  	$result = &latex_corrections($number_of_columns,$result,$selectionmade,
  				     $helper->{'VARS'}->{'ANSWER_TYPE'});
  	#if ($numberofcolumns == 1) {
- Line 2436  ENDPART
+ Line 3432  ENDPART
      my $URLback=''; #link to original document
      if ($helper->{'VARS'}->{'construction'} eq '1') {
- 	#prints resource from the construction space
+ 	$URLback=$helper->{'VARS'}->{'filename'};
- 	$URLback='/'.$helper->{'VARS'}->{'filename'};
- 	if ($URLback=~/([^?]+)/) {
- 	    $URLback=$1;
- 	    $URLback=~s|^/~|/priv/|;
- 	}
      }
      #
      # Final adjustment of the font size:
- Line 2449  ENDPART
+ Line 3440  ENDPART
      $result = set_font_size($result);
+     # Insert any babel headers required.
+     $result       = &collect_languages($result);
  #-- writing .tex file in prtspool
      my $temp_file;
      my $identifier = &Apache::loncommon::get_cgi_id();
- Line 2576  sub print_resources {
+ Line 3572  sub print_resources {
      my ($username,$userdomain,$usersection) = split /:/,$person;
      my $fullname = &get_name($username,$userdomain);
      my $namepostfix = "\\\\";	# Both anon and not anon should get the same vspace.
-     if ($person =~ 'anon') {
- 	$namepostfix .="Name: ";
+     #
+     # Figure out if we need to filter the output by
+     # the incomplete problems for that person
+     #
+     my $print_type = $helper->{'VARS'}->{'PRINT_TYPE'};
+     my $print_incomplete = 0;
+     if (($print_type eq 'map_incomplete_problems_people_seq')   ||
+ 	($print_type eq 'incomplete_problems_selpeople_course')) {
+ 	$print_incomplete = 1;
+     }
+     if ($person eq 'anonymous') {
+ 	$namepostfix .=&mt('Name:')." ";
  	$fullname = "CODE - ".$moreenv->{'CODE'};
      }
      #  Fullname may have special latex characters that need \ prefixing:
      #
      my $i           = 0;
+     my $actually_printed = 0;	# Count of resources printed.
      #goes through all resources, checks if they are available for
      #current student, and produces output
- Line 2601  sub print_resources {
+ Line 3611  sub print_resources {
      #   postscript.  Each ENDOFSTUDENTSTAMP will go on a line by itself.
      #
+     my $syllabus_first = 0;
+     my $current_assignment = "";
+     my $assignment;
+     my $courseidinfo = &get_course();
      foreach my $curresline (@{$master_seq})  {
  	if (defined $page_breaks{$curresline}) {
- Line 2608  sub print_resources {
+ Line 3622  sub print_resources {
  		$current_output.= "\\newpage\n";
  	    }
  	}
+ 	$current_output .= &get_extra_vspaces($helper, $curresline);
  	$i++;
+ 	my ($map,$id,$res_url) = &Apache::lonnet::decode_symb($curresline);
+ 	# See if we need to emit a new header:
  	if ( !($type eq 'problems' &&
- 	       ($curresline!~ m/\.(problem|exam|quiz|assess|survey|form|library)$/)) ) {
+ 	       ($curresline!~ m/$LONCAPA::assess_page_re/)) ) {
- 	    my ($map,$id,$res_url) = &Apache::lonnet::decode_symb($curresline);
+ 	    if ($print_incomplete && !&incomplete($username, $userdomain, $res_url)) {
+ 		next;
+ 	    }
+ 	    $actually_printed++; # we're going to print one.
  	    if (&Apache::lonnet::allowed('bre',$res_url)) {
  		if ($res_url!~m|^ext/|
  		    && $res_url=~/\.(problem|exam|quiz|assess|survey|form|library|page|xml|html|htm|xhtml|xhtm)$/) {
- Line 2620  sub print_resources {
+ Line 3642  sub print_resources {
  		    &Apache::lonxml::remember_problem_counter();
  		    my $rendered = &get_student_view_with_retries($curresline,$ssi_retry_count,$username,$userdomain,$env{'request.course.id'},'tex',$moreenv);
+                     if ($res_url =~ /\.page$/) {
+                         if ($remove_latex_header eq 'NO') {
+                             if (!($rendered =~ /\\begin\{document\}/)) {
+                                 $rendered = &print_latex_header().$rendered;
+                             }
+                         }
+ ;
+                         if ($remove_latex_header eq 'YES') {
+                             $rendered = &latex_header_footer_remove($rendered);
+                         } else {
+                             $rendered =~ s/\\end{document}\d*//;
+                         }
+                     }
  		    if(($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'no') ||
  		       ($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'only')) {
  			#   Use a copy of the hash so we don't pervert it on future loop passes.
  			my %answerenv = %{$moreenv};
  			$answerenv{'answer_output_mode'}='tex';
  			$answerenv{'latex_type'}=$helper->{'VARS'}->{'LATEX_TYPE'};
  			&Apache::lonxml::restore_problem_counter();
- Line 2638  sub print_resources {
+ Line 3674  sub print_resources {
  			    my $header =&print_latex_header($helper->{'VARS'}->{'LATEX_TYPE'});
- 			    $header =~ s/\\begin{document}//;     #<<<<<
+                             unless ($helper->{'VARS'}->{'ANSWER_TYPE'} eq 'only') {
+                                 $header =~ s/\\begin{document}//;     #<<<<<
+                             }
  			    my $title = &Apache::lonnet::gettitle($curresline);
  			    $title = &Apache::lonxml::latex_special_symbols($title);
  			    my $body   ='\vskip 0 mm \noindent\textbf{'.$title.'}\vskip 0 mm ';
- Line 2648  sub print_resources {
+ Line 3686  sub print_resources {
  			    $rendered = $header.$body;
  			}
  		    }
  		    if ($helper->{'VARS'}->{'PRINT_ANNOTATIONS'} eq 'yes') {
  			my $url = &Apache::lonnet::clutter($res_url);
  			my $annotation = &annotate($url);
  			$rendered =~  s/(\\keephidden{ENDOFPROBLEM})/$annotation$1/;
  		    }
+ 		    my $junk;
  		    if ($remove_latex_header eq 'YES') {
  			$rendered = &latex_header_footer_remove($rendered);
  		    } else {
- Line 2661  sub print_resources {
+ Line 3699  sub print_resources {
  		    }
  		    $current_output .= $rendered;
  		} elsif ($res_url=~/\/(smppg|syllabus|aboutme|bulletinboard)$/) {
+ 		    if ($i == 1) {
+ 			$syllabus_first = 1;
+ 		    }
  		    $printed .= $curresline.':';
  		    my $rendered = &get_student_view_with_retries($curresline,$ssi_retry_count,$username,$userdomain,$env{'request.course.id'},'tex',$moreenv);
  		    if ($helper->{'VARS'}->{'PRINT_ANNOTATIONS'} eq 'yes') {
- Line 2692  sub print_resources {
+ Line 3733  sub print_resources {
  		}
  	    }
  	    $remove_latex_header = 'YES';
  	}
+ 	$assignment = &Apache::lonxml::latex_special_symbols(
+ 	    &Apache::lonnet::gettitle($map), 'header');
+ 	if (($assignment ne $current_assignment) && ($assignment ne "")) {
+ 	    my $header_line = &format_page_header($LaTeXwidth, $parmhash{'print_header_format'},
+ 						  $assignment, $courseidinfo,
+ 						  $fullname, $usersection);
+ 	    my $header_start = ($columns_in_format == 1) ? '\lhead'
+ 		: '\fancyhead[LO]';
+ 	    $header_line = $header_start.'{'.$header_line.'}';
+ 	    $current_output = $current_output . $header_line;
+ 	    $current_assignment = $assignment;
+ 	}
  	if (&Apache::loncommon::connection_aborted($r)) { last; }
      }
+     # If we are printing incomplete it's possible we don't have
+     # anything to print.  The print subsystem is not so good at handling
+     # that so we're going to generate a stub that says there are no
+     # incomplete resources for the person.
+     #
+     if ($actually_printed == 0) {
+ 	$current_output  = &encapsulate_minipage("\\vskip -10mm \nNo incomplete resources\n \\vskip 100 mm { }\n");
+ 	if ($remove_latex_header eq "NO") {
+ 	    $current_output = &print_latex_header() . $current_output;
+ 	} else {
+ 	    $current_output = &latex_header_footer_remove($current_output);
+ 	}
+     }
-     my $courseidinfo = &get_course();
+     if ($syllabus_first) {
+         $current_output =~ s/\\\\ Last updated:/Last updated:/
+     }
      my $currentassignment=&Apache::lonxml::latex_special_symbols($helper->{VARS}->{'assignment'},'header');
      my $header_line =
- 	&format_page_header($LaTeXwidth, $parmhash{'print_header_format'},
+     &format_page_header($LaTeXwidth, $parmhash{'print_header_format'},
- 			    $currentassignment, $courseidinfo, $fullname, $usersection);
+                         $currentassignment, $courseidinfo, $fullname, $usersection);
-     my $header_start = ($columns_in_format == 1) ? '\lhead'
+     my $header_start = ($columns_in_format == 1) ? '\lhead' : '\fancyhead[LO]';
- 	                                         : '\fancyhead[LO]';
+     my $newheader = $header_start.'{'.$header_line.'}';
-     $header_line = $header_start.'{'.$header_line.'}';
      if ($current_output=~/\\documentclass/) {
- 	$current_output =~ s/\\begin{document}/\\setlength{\\topmargin}{1cm} \\begin{document}\\noindent\\parbox{\\minipagewidth}{\\noindent$header_line$namepostfix}\\vskip 5 mm /;
+ 	$current_output =~ s/\\begin{document}/\\setlength{\\topmargin}{1cm} \\begin{document}\\noindent\\parbox{\\minipagewidth}{\\noindent$newheader$namepostfix}\\vskip 5 mm /;
      } else {
  	my $blankpages =
  	    '\clearpage\strut\clearpage'x$helper->{'VARS'}->{'EMPTY_PAGES'};
  	$current_output = '\strut\vspace*{-6 mm}\\newline'.
  	    &copyright_line().' \newpage '.$blankpages.$end_of_student.
  	    '\setcounter{page}{1}\noindent\parbox{\minipagewidth}{\noindent'.
- 	    $header_line.$namepostfix.'} \vskip 5 mm '.$current_output;
+ 	    $newheader.$namepostfix. '} \vskip 5 mm '.$current_output;
      }
      #
      #  Close the student bracketing.
- Line 2723  sub print_resources {
+ Line 3793  sub print_resources {
  }
+ sub printing_blocked {
+     my ($r,$blocktext) = @_;
+     my $title = &mt('Preparing Printout');
+     &Apache::lonhtmlcommon::clear_breadcrumbs();
+     &Apache::lonhtmlcommon::add_breadcrumb({href=>'/adm/printout',
+                                             text=> $title});
+     my $breadcrumbs = &Apache::lonhtmlcommon::breadcrumbs($title);
+     &Apache::loncommon::content_type($r,'text/html');
+     &Apache::loncommon::no_cache($r);
+     $r->send_http_header;
+     $r->print(&Apache::loncommon::start_page('Preparing Printout').
+               $breadcrumbs.
+               $blocktext.
+               &Apache::loncommon::end_page());
+     return;
+ }
  sub handler {
      my $r = shift;
+     if ($env{'request.course.id'}) {
+         my $cdom = $env{'course.'.$env{'request.course.id'}.'.domain'};
+         my $cnum = $env{'course.'.$env{'request.course.id'}.'.num'};
+         my ($blocked,$blocktext) =
+             &Apache::loncommon::blocking_status('printout',$cnum,$cdom);
+         if ($blocked) {
+             my $checkrole = "cm./$cdom/$cnum";
+             if ($env{'request.course.sec'} ne '') {
+                 $checkrole .= "/$env{'request.course.sec'}";
+             }
+             unless ((&Apache::lonnet::allowed('evb',undef,undef,$checkrole)) &&
+                     ($env{'request.role'} !~ m{^st\./$cdom/$cnum})) {
+                 &printing_blocked($r,$blocktext);
+                 return OK;
+             }
+         }
+     }
      &init_perm();
      my $helper = printHelper($r);
      if (!ref($helper)) {
  	return $helper;
- Line 2754  sub handler {
+ Line 3856  sub handler {
      &output_data($r,$helper,\%parmhash);
      return OK;
  }
  use Apache::lonhelper;
- Line 2779  sub init_perm {
+ Line 3881  sub init_perm {
  	$perm{'pfo'}=&Apache::lonnet::allowed('pfo',
  		  $env{'request.course.id'}.'/'.$env{'request.course.sec'});
      }
+     $perm{'vgr'}=&Apache::lonnet::allowed('vgr',$env{'request.course.id'});
+     if (!$perm{'vgr'}) {
+         $perm{'vgr'}=&Apache::lonnet::allowed('vgr',
+                    $env{'request.course.id'}.'/'.$env{'request.course.sec'});
+     }
  }
  sub get_randomly_ordered_warning {
- Line 2794  sub get_randomly_ordered_warning {
+ Line 3901  sub get_randomly_ordered_warning {
  	    my $func =
  	        sub { return ($_[0]->is_map() && $_[0]->randomorder); };
  	    my @matches = $navmap->retrieveResources($res, $func,1,1,1);
- 	    if (@matches) {
- 	        $message = "Some of the items below are in folders set to be randomly ordered. However, when printing the contents of these folders, they will be printed in the original order for all students, not the randomized order.";
- 	    }
-         }
-         if ($message) {
- 	    return '<message type="warning">'.$message.'</message>';
          }
      } else {
          $message = "Retrieval of information about ordering of resources failed.";
- Line 2850  sub printHelper {
+ Line 3952  sub printHelper {
      $helper->declareVar('PRINT_TYPE');
      $helper->declareVar("showallfoils");
      $helper->declareVar("STUDENTS");
+     $helper->declareVar("EXTRASPACE");
-     #  The page breaks can get loaded initially from the course environment:
+     #  The page breaks and extra spaces
+     #  can get loaded initially from the course environment:
      # But we only do this in the initial state so that they are allowed to change.
      #
-     # $helper->{VARS}->{FINISHPAGE} = '';
      &Apache::loncommon::restore_course_settings('print',
  						{'pagebreaks'  => 'scalar',
+ 						 'extraspace'  => 'scalar',
+ 						 'extraspace_units' => 'scalar',
  					         'lastprinttype' => 'scalar'});
      # This will persistently load in the data we want from the
- Line 2872  sub printHelper {
+ Line 3976  sub printHelper {
  	if (!defined ($env{"form.CURRENT_STATE"})) {
  	    $helper->{VARS}->{FINISHPAGE} = $env{'form.pagebreaks'};
+ 	    $helper->{VARS}->{EXTRASPACE} = $env{'form.extraspace'};
+ 	    $helper->{VARS}->{EXTRASPACE_UNITS} = $env{'form.extraspace_units'};
  	} else {
  	    my $state = $env{"form.CURRENT_STATE"};
  	    if ($state eq "START") {
  		$helper->{VARS}->{FINISHPAGE} = $env{'form.pagebreaks'};
+ 		$helper->{VARS}->{EXTRASPACE} = $env{'form.extraspace'};
+ 		$helper->{VARS}->{EXTRASPACE_UNITS} = $env{'form.extraspace_units'};
  	    }
  	}
      }
      # Detect whether we're coming from construction space
-     if ($env{'form.postdata'}=~/^(?:http:\/\/[^\/]+\/|\/|)\~([^\/]+)\/(.*)$/) {
+     if ($env{'form.postdata'}=~m{^/priv}) {
-         $helper->{VARS}->{'filename'} = "~$1/$2";
+         $helper->{VARS}->{'filename'} = $env{'form.postdata'};
          $helper->{VARS}->{'construction'} = 1;
      } else {
          if ($env{'form.postdata'}) {
- Line 2919  sub printHelper {
+ Line 4028  sub printHelper {
      my ($map, $id, $url);
      my $subdir;
      my $is_published=0;		# True when printing from resource space.
+     my $res_printable = 1;	# By default the current resource is printable.
+     my $userCanPrint = ($perm{'pav'} || $perm{'pfo'});
+     my $res_printstartdate;
+     my $res_printenddate;
+     my $map_open = 0;
+     my $map_close = 0xffffffff;
+     my $course_open = 0;
+     my $course_close = 0xffffffff;
      # Get the resource name from construction space
      if ($helper->{VARS}->{'construction'}) {
- Line 2927  sub printHelper {
+ Line 4044  sub printHelper {
          $subdir = substr($helper->{VARS}->{'filename'},
 , rindex($helper->{VARS}->{'filename'}, '/') + 1);
      } else {
+ 	# From course space:
  	if ($symb ne '') {
  	    ($map, $id, $url) = &Apache::lonnet::decode_symb($symb);
  	    $helper->{VARS}->{'postdata'} =
  		&Apache::lonenc::check_encrypt(&Apache::lonnet::clutter($url));
+ 	    my $navmap = Apache::lonnavmaps::navmap->new();
+ 	    my $res   = $navmap->getBySymb($symb);
+ 	    $res_printable  = $res->resprintable() || $userCanPrint; #printability in course context
+ 	    ($res_printstartdate, $res_printenddate) = 	&get_print_dates($res);
+ 	    ($course_open, $course_close) = &course_print_dates($res);
+ 	    ($map_open, $map_close)       = &map_print_dates($res);
  	} else {
+ 	    # Resource space.
  	    $url = $helper->{VARS}->{'postdata'};
  	    $is_published=1;	# From resource space.
  	}
  	$url = &Apache::lonnet::clutter($url);
          if (!$resourceTitle) { # if the resource doesn't have a title, use the filename
              my $postdata = $helper->{VARS}->{'postdata'};
              $resourceTitle = substr($postdata, rindex($postdata, '/') + 1);
          }
          $subdir = &Apache::lonnet::filelocation("", $url);
      }
      if (!$helper->{VARS}->{'curseed'} && $env{'form.curseed'}) {
  	$helper->{VARS}->{'curseed'}=$env{'form.curseed'};
      }
      if (!$helper->{VARS}->{'probstatus'} && $env{'form.problemtype'}) {
  	$helper->{VARS}->{'probstatus'}=$env{'form.problemstatus'};
      }
- Line 2971  sub printHelper {
+ Line 4101  sub printHelper {
      my $printChoices = [];
      my $paramHash;
-     if ($resourceTitle) {
+     # If there is a current resource and it is printable
+     # Give that as a choice.
+     if ($resourceTitle && $res_printable) {
          push @{$printChoices}, ["<b><i>$resourceTitle</i></b> (".&mt('the resource you just saw on the screen').")", 'current_document', 'PAGESIZE'];
      }
      # Useful filter strings
-     my $isProblem = '($res->is_problem()||$res->contains_problem||$res->is_practice()) ';
+     my $isPrintable = ' && $res->resprintable()';
+     my $isProblem = '(($res->is_problem()||$res->contains_problem() ||$res->is_practice()))';
+     $isProblem .= $isPrintable unless $userCanPrint;
      $isProblem .= ' && !$res->randomout()' if !$userCanSeeHidden;
-     my $isProblemOrMap = '$res->is_problem() || $res->contains_problem() || $res->is_sequence() || $res->is_practice()';
+     my $isProblemOrMap = '($res->is_problem() || $res->contains_problem() || $res->is_sequence() || $res->is_practice())';
-     my $isNotMap = '!$res->is_sequence()';
+     $isProblemOrMap .= $isPrintable unless $userCanPrint;
+     my $isNotMap = '(!$res->is_sequence())';
+     $isNotMap .= $isPrintable unless $userCanPrint;
      $isNotMap .= ' && !$res->randomout()' if !$userCanSeeHidden;
      my $isMap = '$res->is_map()';
-     my $symbFilter = '$res->shown_symb()';
+     $isMap .= $isPrintable unless $userCanPrint;
+     my $symbFilter = '$res->shown_symb() ';
      my $urlValue = '$res->link()';
      $helper->declareVar('SEQUENCE');
- Line 2992  sub printHelper {
+ Line 4132  sub printHelper {
      my $start_new_option;
      if ($perm{'pav'}) {
  	$start_new_option =
- 	    "<option text='".&mt('Start new page<br />before selected').
+ 	    "<option text='".&mt('Start new page[_1]before selected','<br />').
- 	    "' variable='FINISHPAGE' />";
+ 	    "' variable='FINISHPAGE' />".
+ 	    "<option text='".&mt('Extra space[_1]before selected','<br />').
+ 	    "' variable='EXTRASPACE' type='text' />" .
+ 	    "<option " .
+ 	    "' variable='POSSIBLE_RESOURCES' type='hidden' />".
+ 	    "<option text='".&mt('Space units[_1]check for mm','<br />').
+ 	    "' variable='EXTRASPACE_UNITS' type='checkbox' />"
+ 	    ;
      }
-     if (($helper->{'VARS'}->{'construction'} ne '1' ) &&
+     # If not construction space user can print the components of a page:
+     my $page_ispage;
+     my $page_title;
+     if (!$helper->{VARS}->{'construction'}) {
+ 	my $varspostdata = $helper->{VARS}->{'postdata'};
+ 	my $varsassignment = $helper->{VARS}->{'assignment'};
+ 	my $page_navmap         = Apache::lonnavmaps::navmap->new();
+ 	if (defined($page_navmap)) {
+ 	    my @page_resources      = $page_navmap->retrieveResources($url);
+ 	    if(defined($page_resources[0])) {
+ 		$page_ispage       = $page_resources[0]->is_page();
+ 		$page_title     = $page_resources[0]->title();
+ 		my $resourcesymb   = $page_resources[0]->symb();
+ 		my ($pagemap, $pageid, $pageurl) = &Apache::lonnet::decode_symb($symb);
+ 		if ($page_ispage) {
+ 		    push @{$printChoices},
+ 		    [&mt('Selected [_1]Problems[_2] from page [_3]', '<b>', '</b>', '<b><i>'.$page_title.'</i></b>'),
+ 		     'map_problems_in_page',
+ 		     'CHOOSE_PROBLEMS_PAGE'];
+ 		    push @{$printChoices},
+ 		    [&mt('Selected [_1]Resources[_2] from page [_3]', '<b>', '</b>', '<b><i>'.$page_title.'</i></b>'),
+ 		     'map_resources_in_page',
+ 		     'CHOOSE_RESOURCES_PAGE'];
+ 		}
+         my $helperFragment = &generate_resource_chooser('CHOOSE_PROBLEMS_PAGE',
+ 							'Select Problem(s) to print',
+ 							"multichoice='1' toponly='1' addstatus='1' closeallpages='1'",
+ 							'RESOURCES',
+ 							'PAGESIZE',
+ 							$url,
+ 							$isProblem, '',  $symbFilter,
+ 							$start_new_option);
+       $helperFragment .= &generate_resource_chooser('CHOOSE_RESOURCES_PAGE',
+ 						    'Select Resource(s) to print',
+ 						    'multichoice="1" toponly="1" addstatus="1" closeallpages="1"',
+ 						    'RESOURCES',
+ 						    'PAGESIZE',
+ 						    $url,
+ 						    $isNotMap, '', $symbFilter,
+ 						    $start_new_option);
+ 	&Apache::lonxml::xmlparse($r, 'helper', $helperFragment);
+ 	    }
+ 	}
+     }
+     if (($helper->{'VAR'}->{'construction'} ne '1' ) &&
  	$helper->{VARS}->{'postdata'} &&
  	$helper->{VARS}->{'assignment'}) {
+ 	# BZ 5209 - Print incomplete problems from sequence:
+ 	# the exact form of this depends on whether or not we are privileged or a mere
+ 	# plebe of s student:
+ 	my $printSelector = 'map_incomplete_problems_seq';
+ 	my $nextState     = 'CHOOSE_INCOMPLETE_SEQ';
+ 	my $textSuffix    = '';
+ 	if ($userCanPrint)  {
+ 	    $printSelector = 'map_incomplete_problems_people_seq';
+ 	    $nextState     = 'CHOOSE_INCOMPLETE_PEOPLE_SEQ';
+ 	    $textSuffix    = ' for selected students';
+ 	    my $helperStates =
+ 		&create_incomplete_folder_selstud_helper($helper, $map);
+ 	    &Apache::lonxml::xmlparse($r, 'helper', $helperStates);
+ 	} else {
+ 	    if (&printable($map_open, $map_close)) {
+ 		my $helperStates = &create_incomplete_folder_helper($helper, $map); # Create needed states for student.
+ 		&Apache::lonxml::xmlparse($r, 'helper', $helperStates);
+ 	    } else {
+ 		# TODO: Figure out how to break the news...this folder is not printable.
+ 	    }
+ 	}
+ 	if ($userCanPrint || &printable($map_open, $map_close)) {
+ 	    push(@{$printChoices},
+ 		 [&mt('Selected  [_1]Incomplete Problems[_2] from folder [_3]' . $textSuffix,
+ 		      '<b>', '</b>',
+ 		      '<b><i>'. $sequenceTitle . '</b></i>'),
+ 		  $printSelector,
+ 		  $nextState]);
+ 	}
          # Allow problems from sequence
-         push @{$printChoices}, [&mt('Selected [_1]Problems[_2] from folder [_3]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>'), 'map_problems', 'CHOOSE_PROBLEMS'];
+ 	if ($userCanPrint || &printable($map_open, $map_close)) {
-         # Allow all resources from sequence
+ 	    push @{$printChoices},
-         push @{$printChoices}, [&mt('Selected [_1]Resources[_2] from folder [_3]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>'), 'map_problems_pages', 'CHOOSE_PROBLEMS_HTML'];
+ 	    [&mt('Selected [_1]Problems[_2] from folder [_3]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>'),
+ 	     'map_problems',
+ 	     'CHOOSE_PROBLEMS'];
+ 	    # Allow all resources from sequence
+ 	    push @{$printChoices}, [&mt('Selected [_1]Resources[_2] from folder [_3]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>'),
+ 				    'map_problems_pages',
+ 				    'CHOOSE_PROBLEMS_HTML'];
+ 	    my $helperFragment = &generate_resource_chooser('CHOOSE_PROBLEMS',
+ 							    'Select Problem(s) to print',
+ 							    'multichoice="1" toponly="1" addstatus="1" closeallpages="1"',
+ 							    'RESOURCES',
+ 							    'PAGESIZE',
+ 							    $map,
+ 							    $isProblem, '',
+ 							    $symbFilter,
+ 							    $start_new_option);
+ 	    $helperFragment .= &generate_resource_chooser('CHOOSE_PROBLEMS_HTML',
+ 							  'Select Resource(s) to print',
+ 							  'multichoice="1" toponly="1" addstatus="1" closeallpages="1"',
+ 							  'RESOURCES',
+ 							  'PAGESIZE',
+ 							  $map,
+ 							  $isNotMap, '',
+ 							  $symbFilter,
+ 							  $start_new_option);
+ 	    &Apache::lonxml::xmlparse($r, 'helper', $helperFragment);
+ 	} else {
+ 	    # TODO: Figure out how to tell them the folder is not printable.
+ 	}
+     }
+ 	# If the user has pfo (print for others) allow them to print all
+ 	# problems and resources  in the entire course, optionally for selected students
+ 	my $post_data = $helper->{VARS}->{'postdata'};
+     if ($perm{'pfo'} &&  !$is_published  &&
+         ($post_data=~/\/res\// || $post_data =~/\/(syllabus|smppg|aboutme|bulletinboard)$/)) {
-         my $helperFragment = <<HELPERFRAGMENT;
+ 	# BZ 5209 - incomplete problems from entire course:
-   <state name="CHOOSE_PROBLEMS" title="Select Problem(s) to print">
-     <resource variable="RESOURCES" multichoice="1" toponly='1' addstatus="1"
-               closeallpages="1">
-       <nextstate>PAGESIZE</nextstate>
-       <filterfunc>return $isProblem;</filterfunc>
-       <mapurl>$map</mapurl>
-       <valuefunc>return $symbFilter;</valuefunc>
-       $start_new_option
-       </resource>
-     </state>
-   <state name="CHOOSE_PROBLEMS_HTML" title="Select Resource(s) to print">
+ 	push(@{$printChoices},
-     <resource variable="RESOURCES" multichoice="1" toponly='1' addstatus="1"
+ 	     [&mtn('Selected <b>Incomplete Problems</b> from <b>entire course</b> for selected people'),
-               closeallpages="1">
+ 	      'incomplete_problems_selpeople_course', 'INCOMPLETE_PROBLEMS_COURSE_RESOURCES']);
-       <nextstate>PAGESIZE</nextstate>
+ 	my $helperFragment = &create_incomplete_course_helper($helper); # Create needed states.
-       <filterfunc>return $isNotMap;</filterfunc>
-       <mapurl>$map</mapurl>
-       <valuefunc>return $symbFilter;</valuefunc>
-       $start_new_option
-       </resource>
-     </state>
- HELPERFRAGMENT
  	&Apache::lonxml::xmlparse($r, 'helper', $helperFragment);
-     }
-     # If the user has pfo (print for others) allow them to print all
+ 	#  Selected problems/resources from entire course:
-     # problems and resources  in the entire course, optionally for selected students
-     if ($perm{'pfo'} &&  !$is_published  &&
-         ($helper->{VARS}->{'postdata'}=~/\/res\// || $helper->{VARS}->{'postdata'}=~/\/(syllabus|smppg|aboutme|bulletinboard)$/)) {
          push @{$printChoices}, [&mtn('Selected <b>Problems</b> from <b>entire course</b>'), 'all_problems', 'ALL_PROBLEMS'];
  	push @{$printChoices}, [&mtn('Selected <b>Resources</b> from <b>entire course</b>'), 'all_resources', 'ALL_RESOURCES'];
  	push @{$printChoices}, [&mtn('Selected <b>Problems</b> from <b>entire course</b> for <b>selected people</b>'), 'all_problems_students', 'ALL_PROBLEMS_STUDENTS'];
-          &Apache::lonxml::xmlparse($r, 'helper', <<ALL_PROBLEMS);
+ my $suffixXml = <<ALL_PROBLEMS;
-   <state name="ALL_PROBLEMS" title="Select Problem(s) to print">
-     <resource variable="RESOURCES" toponly='0' multichoice="1"
- 	suppressEmptySequences='0' addstatus="1" closeallpages="1">
-       <nextstate>PAGESIZE</nextstate>
-       <filterfunc>return $isProblemOrMap;</filterfunc>
-       <choicefunc>return $isNotMap;</choicefunc>
-       <valuefunc>return $symbFilter;</valuefunc>
-       $start_new_option
-     </resource>
-   </state>
-   <state name="ALL_RESOURCES" title="Select Resource(s) to print">
-     <resource variable="RESOURCES" toponly='0' multichoice='1'
-               suppressEmptySequences='0' addstatus='1' closeallpages='1'>
-       <nextstate>PAGESIZE</nextstate>
-       <filterfunc>return $isNotMap; </filterfunc>
-       <valuefunc>return $symbFilter;</valuefunc>
-       $start_new_option
-     </resource>
-   </state>
-   <state name="ALL_PROBLEMS_STUDENTS" title="Select Problem(s) to print">
-     <resource variable="RESOURCES" toponly='0' multichoice="1"
- 	suppressEmptySequences='0' addstatus="1" closeallpages="1">
-       <nextstate>STUDENTS1</nextstate>
-       <filterfunc>return $isProblemOrMap;</filterfunc>
-       <choicefunc>return $isNotMap;</choicefunc>
-       <valuefunc>return $symbFilter;</valuefunc>
-       $start_new_option
-     </resource>
-   </state>
    <state name="STUDENTS1" title="Select People">
        <message><b>Select sorting order of printout</b> </message>
      <choices variable='student_sort'>
- Line 3078  HELPERFRAGMENT
+ Line 4300  HELPERFRAGMENT
        <message><br /><hr /><br /> </message>
        <student multichoice='1' variable="STUDENTS" nextstate="PRINT_FORMATTING" coursepersonnel="1"/>
    </state>
  ALL_PROBLEMS
+          &Apache::lonxml::xmlparse($r, 'helper',
+ 				   &generate_resource_chooser('ALL_PROBLEMS',
+ 							      'Select Problem(s) to print',
+ 							      'multichoice="1" suppressEmptySequences="0" addstatus="1" closeallpages="1"',
+ 							      'RESOURCES',
+ 							      'PAGESIZE',
+ 							      '',
+ 							      $isProblemOrMap, $isNotMap,
+ 							      $symbFilter,
+ 							      $start_new_option) .
+ 				   &generate_resource_chooser('ALL_RESOURCES',
+ 							      'Select Resource(s) to print',
+ 							      " toponly='0' multichoice='1' suppressEmptySequences='0' addstatus='1' closeallpages='1'",
+ 							      'RESOURCES',
+ 							      'PAGESIZE',
+ 							      '',
+ 							      $isNotMap,'',$symbFilter,
+ 							      $start_new_option) .
+ 				   &generate_resource_chooser('ALL_PROBLEMS_STUDENTS',
+ 							      'Select Problem(s) to print',
+ 							      'toponly="0" multichoice="1" suppressEmptySequences="0" addstatus="1" closeallpages="1"',
+ 							      'RESOURCES',
+ 							      'STUDENTS1',
+ 							      '',
+ 							      $isProblemOrMap,'' , $symbFilter,
+ 							      $start_new_option) .
+ 				     $suffixXml
+ 				   );
  	if ($helper->{VARS}->{'assignment'}) {
- 	    push @{$printChoices}, [&mt('Selected [_1]Problems[_2] from folder [_3] for [_4]selected people[_5]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>','<b>','</b>'), 'problems_for_students', 'CHOOSE_STUDENTS'];
- 	    push @{$printChoices}, [&mt('Selected [_1]Problems[_2] from folder [_3] for [_4]CODEd assignments[_5]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>','<b>','</b>'), 'problems_for_anon', 'CHOOSE_ANON1'];
+ 	    # If we were looking at a page, allow a selection of problems from the page
+ 	    # either for selected students or for coded assignments.
+ 	    if ($page_ispage) {
+ 		push @{$printChoices}, [&mt('Selected [_1]Problems[_2] from page [_3] for [_4]selected people[_5]',
+ 					    '<b>', '</b>', '<b><i>'.$page_title.'</i></b>', '<b>', '</b>'),
+ 					'problems_for_students_from_page', 'CHOOSE_TGT_STUDENTS_PAGE'];
+ 		push @{$printChoices}, [&mt('Selected [_1]Problems[_2] from page [_3] for [_4]CODEd assignments[_5]',
+ 					    '<b>', '</b>', '<b><i>'.$page_title.'</i></b>', '<b>', '</b>'),
+ 					'problems_for_anon_page', 'CHOOSE_ANON1_PAGE'];
+ 	    }
+ 	    push @{$printChoices}, [&mt('Selected [_1]Problems[_2] from folder [_3] for [_4]selected people[_5]',
+ 					'<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>','<b>','</b>'),
+ 				    'problems_for_students', 'CHOOSE_STUDENTS'];
+ 	    push @{$printChoices}, [&mt('Selected [_1]Problems[_2] from folder [_3] for [_4]CODEd assignments[_5]',
+ 					'<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>','<b>','</b>'),
+ 				    'problems_for_anon', 'CHOOSE_ANON1'];
  	}
  	my $randomly_ordered_warning =
- 	    &get_randomly_ordered_warning($helper,$map);
+             &get_randomly_ordered_warning($helper, $map);
  	# resource_selector will hold a few states that:
  	#   - Allow resources to be selected for printing.
- Line 3098  ALL_PROBLEMS
+ Line 4363  ALL_PROBLEMS
  	#    with one state, and use REGEXPs at inclusion time to set state names
  	#    and next states for better mix and match capability
  	#
- 	my $resource_selector=<<RESOURCE_SELECTOR;
+ 	my $resource_selector= &generate_resource_chooser('SELECT_PROBLEMS',
-     <state name="SELECT_PROBLEMS" title="Select resources to print">
+ 							  'Select resources to print',
-     $randomly_ordered_warning
+ 							  'multichoice="1" addstatus="1" closeallpages="1"',
+ 							  'RESOURCES',
+ 							  'PRINT_FORMATTING',
+ 							  $map,
+ 							  $isProblem, '', $symbFilter,
+ 							  $start_new_option);
+ 	$resource_selector .=  &generate_format_selector($helper,
+                                                          'How should results be printed?',
+                                                          'PRINT_FORMATTING').
+                                &generate_resource_chooser('CHOOSE_STUDENTS_PAGE',
+ 							'Select Problem(s) to print',
+ 							"multichoice='1' addstatus='1' closeallpages ='1'",
+ 							'RESOURCES',
+ 							'PRINT_FORMATTING',
+ 							$url,
+ 							$isProblem, '',  $symbFilter,
+ 							$start_new_option);
+ # Generate student choosers.
-    <nextstate>PRINT_FORMATTING</nextstate>
-    <message><br /><big><i><b>Select resources for the assignment</b></i></big><br /></message>
-     <resource variable="RESOURCES" multichoice="1" addstatus="1"
-               closeallpages="1">
-       <filterfunc>return $isProblem;</filterfunc>
-       <mapurl>$map</mapurl>
-       <valuefunc>return $symbFilter;</valuefunc>
-       $start_new_option
-       </resource>
-     </state>
-     <state name="PRINT_FORMATTING" title="How should results be printed?">
-     <message><br /><big><i><b>How should the results be printed?</b></i></big><br /></message>
-     <choices variable="EMPTY_PAGES">
-       <choice computer='0'>Start each student\'s assignment on a new page/column (add a pagefeed after each assignment)</choice>
-       <choice computer='1'>Add one empty page/column after each student\'s assignment</choice>
-       <choice computer='2'>Add two empty pages/column after each student\'s assignment</choice>
-       <choice computer='3'>Add three empty pages/column after each student\'s assignment</choice>
-     </choices>
-     <nextstate>PAGESIZE</nextstate>
-     <message><hr width='33%' /><b>How do you want assignments split into PDF files? </b></message>
-     <choices variable="SPLIT_PDFS">
-        <choice computer="all">All assignments in a single PDF file</choice>
-        <choice computer="sections">Each PDF contains exactly one section</choice>
-        <choice computer="oneper">Each PDF contains exactly one assignment</choice>
-        <choice computer="usenumber" relatedvalue="NUMBER_TO_PRINT">
-             Specify the number of assignments per PDF:</choice>
-     </choices>
-     </state>
- RESOURCE_SELECTOR
-         &Apache::lonxml::xmlparse($r, 'helper', <<CHOOSE_STUDENTS);
-   <state name="CHOOSE_STUDENTS" title="Select Students and Resources">
+         &Apache::lonxml::xmlparse($r, 'helper',
-       <message><b>Select sorting order of printout</b> </message>
+ 				  &generate_student_chooser('CHOOSE_TGT_STUDENTS_PAGE',
-     <choices variable='student_sort'>
+ 							    'student_sort',
-       <choice computer='0'>Sort by section then student</choice>
+ 							    'STUDENTS',
-       <choice computer='1'>Sort by students across sections.</choice>
+ 							    'CHOOSE_STUDENTS_PAGE'));
-     </choices>
+ 	&Apache::lonxml::xmlparse($r, 'helper',
-       <message><br /><hr /><br /> </message>
+ 				  &generate_student_chooser('CHOOSE_STUDENTS',
-       <student multichoice='1' variable="STUDENTS" nextstate="SELECT_PROBLEMS" coursepersonnel="1"/>
+ 							    'student_sort',
-   </state>
+ 							    'STUDENTS',
-     $resource_selector
+ 							    'SELECT_PROBLEMS'));
- CHOOSE_STUDENTS
+ 	&Apache::lonxml::xmlparse($r, 'helper', $resource_selector);
  	my $cdom = $env{'course.'.$env{'request.course.id'}.'.domain'};
  	my $cnum = $env{'course.'.$env{'request.course.id'}.'.num'};
- Line 3191  CHOOSE_STUDENTS
+ Line 4446  CHOOSE_STUDENTS
          my @lines = &Apache::grades::get_scantronformat_file();
  	my $codechoice='';
  	foreach my $line (@lines) {
+             next if (($line =~ /^\#/) || ($line eq ''));
  	    my ($name,$description,$code_type,$code_length)=
  		(split(/:/,$line))[0,1,2,4];
  	    if ($code_length > 0 &&
- Line 3201  CHOOSE_STUDENTS
+ Line 4457  CHOOSE_STUDENTS
  	if ($codechoice eq '') {
  	    $codechoice='<choice computer="default">Default</choice>';
  	}
-         &Apache::lonxml::xmlparse($r, 'helper', <<CHOOSE_ANON1);
+ 	my $anon1 = &generate_code_selector($helper,
-   <state name="CHOOSE_ANON1" title="Specify CODEd Assignments">
+ 					    'CHOOSE_ANON1',
-     <nextstate>SELECT_PROBLEMS</nextstate>
+ 					    'SELECT_PROBLEMS',
-     <message><h4>Fill out one of the forms below</h4></message>
+ 					    $codechoice,
-     <message><br /><hr /> <br /></message>
+ 					    $code_selection,
-     <message><h3>Generate new CODEd Assignments</h3></message>
+ 					    $namechoice) . $resource_selector;
-     <message><table><tr><td><b>Number of CODEd assignments to print:</b></td><td></message>
-     <string variable="NUMBER_TO_PRINT_TOTAL" maxlength="5" size="5">
-        <validator>
+         &Apache::lonxml::xmlparse($r, 'helper',$anon1);
- 	if (((\$helper->{'VARS'}{'NUMBER_TO_PRINT_TOTAL'}+0) < 1) &&
- 	    !\$helper->{'VARS'}{'REUSE_OLD_CODES'}                &&
+ 	my $anon_page = &generate_code_selector($helper,
-             !\$helper->{'VARS'}{'SINGLE_CODE'}                    &&
+ 						'CHOOSE_ANON1_PAGE',
- 	    !\$helper->{'VARS'}{'CODE_SELECTED_FROM_LIST'}) {
+ 						'SELECT_PROBLEMS_PAGE',
- 	    return "You need to specify the number of assignments to print";
+ 						$codechoice,
- 	}
+ 						$code_selection,
- 	return undef;
+ 						$namechoice) .
-        </validator>
+ 			&generate_resource_chooser('SELECT_PROBLEMS_PAGE',
-     </string>
+ 						   'Select Problem(s) to print',
-     <message></td></tr><tr><td></message>
+ 						   "multichoice='1' addstatus='1' closeallpages ='1'",
-     <message><b>Names to save the CODEs under for later:</b></message>
+ 						   'RESOURCES',
-     <message></td><td></message>
+ 						   'PRINT_FORMATTING',
-     <string variable="ANON_CODE_STORAGE_NAME" maxlength="50" size="20" />
+ 						   $url,
-     <message></td></tr><tr><td></message>
+ 						   $isProblem, '',  $symbFilter,
-     <message><b>Bubble sheet type:</b></message>
+ 						   $start_new_option);
-     <message></td><td></message>
+ 	&Apache::lonxml::xmlparse($r, 'helper', $anon_page);
-     <dropdown variable="CODE_OPTION" multichoice="0" allowempty="0">
-     $codechoice
-     </dropdown>
-     <message></td></tr><tr><td colspan="2"></td></tr><tr><td></message>
-     <message></td></tr><tr><td></table></message>
-     <message><br /><hr /><h3>Print a Specific CODE </h3><br /><table></message>
-     <message><tr><td><b>Enter a CODE to print:</b></td><td></message>
-     <string variable="SINGLE_CODE" size="10">
-         <validator>
- 	   if(!\$helper->{'VARS'}{'NUMBER_TO_PRINT_TOTAL'}           &&
- 	      !\$helper->{'VARS'}{'REUSE_OLD_CODES'}                 &&
- 	      !\$helper->{'VARS'}{'CODE_SELECTED_FROM_LIST'}) {
- 	      return &Apache::lonprintout::is_code_valid(\$helper->{'VARS'}{'SINGLE_CODE'},
- 						      \$helper->{'VARS'}{'CODE_OPTION'});
- 	   } else {
- 	       return undef;	# Other forces control us.
- 	   }
-         </validator>
-     </string>
-     <message></td></tr><tr><td></message>
-         $code_selection
-     <message></td></tr></table></message>
-     <message><hr /><h3>Reprint a Set of Saved CODEs</h3><table><tr><td></message>
-     <message><b>Select saved CODEs:</b></message>
-     <message></td><td></message>
-     <dropdown variable="REUSE_OLD_CODES">
-         $namechoice
-     </dropdown>
-     <message></td></tr></table></message>
-   </state>
-   $resource_selector
- CHOOSE_ANON1
  	if ($helper->{VARS}->{'assignment'}) {
+ 	    # Assignment printing:
  	    push @{$printChoices}, [&mt('Selected [_1]Resources[_2] from folder [_3] for [_4]selected people[_5]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>','<b>','</b>'), 'resources_for_students', 'CHOOSE_STUDENTS1'];
  	    push @{$printChoices}, [&mt('Selected [_1]Resources[_2] from folder [_3] for [_4]CODEd assignments[_5]','<b>','</b>','<b><i>'.$sequenceTitle.'</i></b>','<b>','</b>'), 'resources_for_anon', 'CHOOSE_ANON2'];
  	}
- Line 3269  CHOOSE_ANON1
+ Line 4496  CHOOSE_ANON1
  	$resource_selector=<<RESOURCE_SELECTOR;
      <state name="SELECT_RESOURCES" title="Select Resources">
      $randomly_ordered_warning
      <nextstate>PRINT_FORMATTING</nextstate>
      <message><br /><big><i><b>Select resources for the assignment</b></i></big><br /></message>
      <resource variable="RESOURCES" multichoice="1" addstatus="1"
- Line 3280  CHOOSE_ANON1
+ Line 4506  CHOOSE_ANON1
        $start_new_option
        </resource>
      </state>
-     <state name="PRINT_FORMATTING" title="Format of the print job">
-     <nextstate>NUMBER_PER_PDF</nextstate>
-     <message><br /><big><i><b>How should the results be printed?</b></i></big><br /></message>
-     <choices variable="EMPTY_PAGES">
-       <choice computer='0'>Start each student\'s assignment on a new page/column (add a pagefeed after each assignment)</choice>
-       <choice computer='1'>Add one empty page/column after each student\'s assignment</choice>
-       <choice computer='2'>Add two empty pages/column after each student\'s assignment</choice>
-       <choice computer='3'>Add three empty pages/column after each student\'s assignment</choice>
-     </choices>
-     <nextstate>PAGESIZE</nextstate>
-     <message><hr width='33%' /><b>How do you want assignments split into PDF files? </b></message>
-     <choices variable="SPLIT_PDFS">
-        <choice computer="all">All assignments in a single PDF file</choice>
-        <choice computer="sections">Each PDF contains exactly one section</choice>
-        <choice computer="oneper">Each PDF contains exactly one assignment</choice>
-        <choice computer="usenumber" relatedvalue="NUMBER_TO_PRINT">
-            Specify the number of assignments per PDF:</choice>
-     </choices>
-     </state>
  RESOURCE_SELECTOR
+         $resource_selector .= &generate_format_selector($helper,
+                                                         'Format of the print job',
+                                                         'PRINT_FORMATTING');
  	&Apache::lonxml::xmlparse($r, 'helper', <<CHOOSE_STUDENTS1);
    <state name="CHOOSE_STUDENTS1" title="Select Students and Resources">
      <choices variable='student_sort'>
- Line 3321  CHOOSE_STUDENTS1
+ Line 4531  CHOOSE_STUDENTS1
      <message><br /><hr /> <br /></message>
      <message><h3>Generate new CODEd Assignments</h3></message>
      <message><table><tr><td><b>Number of CODEd assignments to print:</b></td><td></message>
-     <string variable="NUMBER_TO_PRINT_TOTAL" maxlength="5" size="5">
+     <string variable="NUMBER_TO_PRINT_TOTAL" maxlength="5" size="5"  noproceed="1">
         <validator>
  	if (((\$helper->{'VARS'}{'NUMBER_TO_PRINT_TOTAL'}+0) < 1) &&
  	    !\$helper->{'VARS'}{'REUSE_OLD_CODES'}                &&
- Line 3329  CHOOSE_STUDENTS1
+ Line 4539  CHOOSE_STUDENTS1
  	    !\$helper->{'VARS'}{'CODE_SELECTED_FROM_LIST'}) {
  	    return "You need to specify the number of assignments to print";
  	}
+         if (((\$helper->{'VARS'}{'NUMBER_TO_PRINT_TOTAL'}+0) >= 1)  &&
+              (\$helper->{'VARS'}{'SINGLE_CODE'} ne '') ) {
+             return 'Specifying number of codes to print and a specific code is not compatible';
+         }
  	return undef;
         </validator>
      </string>
- Line 3337  CHOOSE_STUDENTS1
+ Line 4551  CHOOSE_STUDENTS1
      <message></td><td></message>
      <string variable="ANON_CODE_STORAGE_NAME" maxlength="50" size="20" />
      <message></td></tr><tr><td></message>
-     <message><b>Bubble sheet type:</b></message>
+     <message><b>Bubblesheet type:</b></message>
      <message></td><td></message>
      <dropdown variable="CODE_OPTION" multichoice="0" allowempty="0">
      $codechoice
- Line 3352  CHOOSE_STUDENTS1
+ Line 4566  CHOOSE_STUDENTS1
  	      !\$helper->{'VARS'}{'CODE_SELECTED_FROM_LIST'}) {
  	      return &Apache::lonprintout::is_code_valid(\$helper->{'VARS'}{'SINGLE_CODE'},
  						      \$helper->{'VARS'}{'CODE_OPTION'});
+ 	  } elsif (\$helper->{'VARS'}{'SINGLE_CODE'} ne ''){
+ 	      return 'Specifying a code name is incompatible specifying number of codes.';
  	   } else {
  	       return undef;	# Other forces control us.
  	   }
- Line 3419  CHOOSE_FROM_SUBDIR
+ Line 4635  CHOOSE_FROM_SUBDIR
      <message>Select the sequence to print resources from:</message>
      <resource variable="SEQUENCE">
        <nextstate>CHOOSE_FROM_ANY_SEQUENCE</nextstate>
-       <filterfunc>return \$res->is_sequence;</filterfunc>
+       <filterfunc>return &Apache::lonprintout::printable_sequence(\$res);</filterfunc>
        <valuefunc>return $urlValue;</valuefunc>
        <choicefunc>return \$res->hasResource(\$res,sub { return !\$_[0]->is_sequence() },0,0);
  	</choicefunc>
- Line 3441  CHOOSE_FROM_ANY_SEQUENCE
+ Line 4657  CHOOSE_FROM_ANY_SEQUENCE
      # Generate the first state, to select which resources get printed.
      Apache::lonhelper::state->new("START", "Select Printing Options:");
+     if (!$res_printable) {
+         my $now = time;
+         my $shownprintstart = &Apache::lonlocal::locallocaltime($res_printstartdate);
+         my $shownprintend = &Apache::lonlocal::locallocaltime($res_printenddate);
+         my $noprintmsg;
+         if (($res_printenddate) && ($res_printenddate < $now)) {
+                 $noprintmsg = &mt('Printing for current resource no longer available (ended: [_1])',
+                                   $shownprintend);
+         } else {
+             if (($res_printstartdate) && ($res_printstartdate > $now)) {
+                 if (($res_printenddate) && ($res_printenddate > $now) && ($res_printenddate > $res_printstartdate)) {
+                     $noprintmsg = &mt('Printing for current resource is only possible between [_1] and [_2]',
+                                   $shownprintstart,$shownprintend);
+                 } elsif (!$res_printenddate) {
+                     $noprintmsg = &mt('Printing for current resource will only be possible starting [_1]',
+                                       $shownprintstart);
+                 } else {
+                     $noprintmsg = &mt('Printing for current resource is unavailable');
+                 }
+             }
+         }
+         if ($noprintmsg) {
+             $paramHash = Apache::lonhelper::getParamHash();
+ 	    $paramHash->{MESSAGE_TEXT} =
+                 '<p class="LC_info">'.$noprintmsg.'</p>';
+ 	    Apache::lonhelper::message->new();
+         }
+     }
+     $paramHash = Apache::lonhelper::getParamHash();
      $paramHash = Apache::lonhelper::getParamHash();
      $paramHash->{MESSAGE_TEXT} = "";
      Apache::lonhelper::message->new();
- Line 3452  CHOOSE_FROM_ANY_SEQUENCE
+ Line 4698  CHOOSE_FROM_ANY_SEQUENCE
      my $startedTable = 0; # have we started an HTML table yet? (need
                            # to close it later)
-     if (($perm{'pav'} and &Apache::lonnet::allowed('vgr',$env{'request.course.id'})) or
+     if (($perm{'pav'} and $perm{'vgr'}) or
  	($helper->{VARS}->{'construction'} eq '1')) {
  	&addMessage('<br />'
                     .'<h3>'.&mt('Print Options').'</h3>'
- Line 3662  FONT_SELECTION
+ Line 4908  FONT_SELECTION
  		      return "$helper->{VARS}->{'probstatus'}";
                     </defaultvalue>
  		   <choice computer="problem">Homework Problem</choice>
- 		   <choice computer="exam">Exam Problem</choice>
+ 		   <choice computer="exam">Bubblesheet Exam Problem</choice>
  		   <choice computer="survey">Survey question</choice>
+                    ,choice computer="anonsurvey"Anonymous survey question</choice>
  		</dropdown>
  PROBTYPE
              &Apache::lonxml::xmlparse($r, 'helper', $xmlfrag);
- Line 3698  PROBTYPE
+ Line 4945  PROBTYPE
          return $helper;
      }
-     $r->print($helper->display());
+     my $footer;
      if ($helper->{STATE} eq 'START') {
- 	&recently_generated($r);
+         my $prtspool=$r->dir_config('lonPrtDir');
+ 	$footer = &recently_generated($prtspool);
      }
+     $r->print($helper->display($footer));
      &Apache::lonhelper::unregisterHelperTags();
      return OK;
- Line 3777  sub render {
+ Line 5026  sub render {
      my $PaperType=&mt('Paper type');
      my $landscape=&mt('Landscape');
      my $portrait=&mt('Portrait');
-     my $pdfFormLabel=&mt('PDF-Formfields');
+     my $pdfFormLabel=&mt('PDF Form Fields');
-     my $with=&mt('with Formfields');
+     my $with=&mt('with Form Fields');
-     my $without=&mt('without Formfields');
+     my $without=&mt('without Form Fields');
      $result.='<h3>'.&mt('Layout Options').'</h3>'
- Line 4009  sub preprocess {
+ Line 5258  sub preprocess {
  	($papersize)                      = split(/ /, $papersize);
- 	$laystyle = &map_laystyle($laystyle);
+ 	$laystyle = &Apache::lonprintout::map_laystyle($laystyle);
  	#  Figure out some good defaults for the print out and set them:
- Line 4080  sub postprocess {
+ Line 5329  sub postprocess {
      }
  }
  __END__

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>

Removed from v.1.559
changed lines
	Added in v.1.642