--- loncom/interface/statistics/lonproblemanalysis.pm 2004/01/08 19:20:12 1.53 +++ loncom/interface/statistics/lonproblemanalysis.pm 2004/10/04 19:10:26 1.91 @@ -1,6 +1,6 @@ # The LearningOnline Network with CAPA # -# $Id: lonproblemanalysis.pm,v 1.53 2004/01/08 19:20:12 matthew Exp $ +# $Id: lonproblemanalysis.pm,v 1.91 2004/10/04 19:10:26 matthew Exp $ # # Copyright Michigan State University Board of Trustees # @@ -33,6 +33,8 @@ use Apache::lonhtmlcommon(); use Apache::loncoursedata(); use Apache::lonstatistics; use Apache::lonlocal; +use Apache::lonstathelpers(); +use Apache::lonstudentsubmissions(); use HTML::Entities(); use Time::Local(); use Spreadsheet::WriteExcel(); @@ -42,41 +44,24 @@ my $plotcolors = ['#33ff00', '#66ccff', '#ff9999', '#cccc33', '#660000', '#33cc66', ]; -my @SubmitButtons = ({ name => 'ProblemAnalyis', +my @SubmitButtons = ({ name => 'PrevProblemAnalysis', + text => 'Previous Problem' }, + { name => 'ProblemAnalysis', text => 'Analyze Problem Again' }, - { name => 'ClearCache', - text => 'Clear Caches' }, - { name => 'updatecaches', - text => 'Update Student Data' }, + { name => 'NextProblemAnalysis', + text => 'Next Problem' }, + { name => 'break'}, { name => 'SelectAnother', text => 'Choose a different Problem' }, { name => 'ExcelOutput', text => 'Produce Excel Output' }); -sub render_resource { - my ($resource) = @_; - ## - ## Render the problem - my $base; - ($base,undef) = ($resource->{'src'} =~ m|(.*/)[^/]*$|); - $base = "http://".$ENV{'SERVER_NAME'}.$base; - my $rendered_problem = - &Apache::lonnet::ssi_body($resource->{'src'}); - $rendered_problem =~ s/<\s*form\s*/)|<\/nop>|g; - return '
'. - ''. - $rendered_problem. - '
'; -} - sub BuildProblemAnalysisPage { my ($r,$c)=@_; # my %Saveable_Parameters = ('Status' => 'scalar', 'Section' => 'array', 'NumPlots' => 'scalar', - 'AnalyzeAs' => 'scalar', 'AnalyzeOver' => 'scalar', ); &Apache::loncommon::store_course_settings('problem_analysis', @@ -86,61 +71,98 @@ sub BuildProblemAnalysisPage { # &Apache::lonstatistics::PrepareClasslist(); # - $r->print('

'.&mt('Option Response Problem Analysis').'

'); $r->print(&CreateInterface()); # my @Students = @Apache::lonstatistics::Students; # - if (@Students < 1) { + if (@Students < 1 && exists($ENV{'form.firstrun'})) { $r->print('

There are no students in the sections selected

'); } # - &Apache::loncoursedata::clear_internal_caches(); - if (exists($ENV{'form.ClearCache'}) || - exists($ENV{'form.updatecaches'}) || - (exists($ENV{'form.firstanalysis'}) && - $ENV{'form.firstanalysis'} ne 'no')) { - &Apache::lonstatistics::Gather_Full_Student_Data($r); - } - if (! exists($ENV{'form.firstanalysis'})) { - $r->print(''); - } else { - $r->print(''); - } + my @CacheButtonHTML = + &Apache::lonstathelpers::manage_caches($r,'Statistics','stats_status'); $r->rflush(); # + # Support for numerical and radio response isn't complete enough to + # include in 1.2 release. + # my $problem_types = '(option|radiobutton|numerical)'; + my $problem_types = '(option)'; if (exists($ENV{'form.problemchoice'}) && ! exists($ENV{'form.SelectAnother'})) { foreach my $button (@SubmitButtons) { - $r->print(''); - $r->print(' 'x5); + if ($button->{'name'} eq 'break') { + $r->print("
\n"); + } else { + $r->print(''); + $r->print(' 'x5); + } + } + foreach my $html (@CacheButtonHTML) { + $r->print($html.(' 'x5)); } - $r->print(''); # $r->print('
'); - # - my ($symb,$part,$resid,$resptype) = &get_problem_symb( - &Apache::lonnet::unescape($ENV{'form.problemchoice'})); $r->rflush(); # - my $resource = &get_resource_from_symb($symb); - if (! defined($resource) || ! defined($resptype)) { + # Determine which problem we are to analyze + my $current_problem = &Apache::lonstathelpers::get_target_from_id + ($ENV{'form.problemchoice'}); + # + my ($prev,$curr,$next) = + &Apache::lonstathelpers::get_prev_curr_next($current_problem, + $problem_types, + 'response', + ); + if (exists($ENV{'form.PrevProblemAnalysis'}) && defined($prev)) { + $current_problem = $prev; + } elsif (exists($ENV{'form.NextProblemAnalysis'}) && defined($next)) { + $current_problem = $next; + } else { + $current_problem = $curr; + } + # + # Store the current problem choice and send it out in the form + $ENV{'form.problemchoice'} = + &Apache::lonstathelpers::make_target_id($current_problem); + $r->print(''); + # + if (! defined($current_problem->{'resource'})) { $r->print('resource is undefined'); } else { + my $resource = $current_problem->{'resource'}; $r->print('

'.$resource->{'title'}.'

'); $r->print('

'.$resource->{'src'}.'

'); - $r->print(&render_resource($resource)); + if ($ENV{'form.show_prob'} eq 'true') { + $r->print(&Apache::lonstathelpers::render_resource($resource)); + } $r->rflush(); - my %Data = &get_problem_data($resource->{'src'}); - my $ProblemData = $Data{$part.'.'.$resid}; - if ($resptype eq 'option') { - &OptionResponseAnalysis($r,$resource,$resid,$ProblemData, + my %Data = &Apache::lonstathelpers::get_problem_data + ($resource->{'src'}); + my $problem_data = $Data{$current_problem->{'part'}. + '.'. + $current_problem->{'respid'}}; + if ($current_problem->{'resptype'} eq 'option') { + &OptionResponseAnalysis($r,$current_problem, + $problem_data, \@Students); - } elsif ($resptype eq 'radiobutton') { - &RadioResponseAnalysis($r,$resource,$part,$resid,$ProblemData, + } elsif ($current_problem->{'resptype'} eq 'radiobutton') { + &RadioResponseAnalysis($r,$current_problem, + $problem_data, \@Students); + } elsif ($current_problem->{'resptype'} eq 'numerical') { + ## + ## analyze all responses of a problem at once + my $res = $current_problem->{'resource'}; + foreach my $partid (@{$res->{'parts'}}) { + $current_problem->{'part'} = $partid; + foreach my $respid (@{$res->{'partdata'}->{$partid}->{'ResponseIds'}}) { + $current_problem->{'respid'}=$respid; + &NumericalResponseAnalysis($r,$current_problem, + $problem_data,\@Students); + } + } } else { $r->print('

This analysis is not supported

'); } @@ -151,13 +173,201 @@ sub BuildProblemAnalysisPage { &mt('Analyze Problem').'" />'); $r->print(' 'x5); $r->print('

'.&mt('Please select a problem to analyze').'

'); - $r->print(&ProblemSelector()); + $r->print(&Apache::lonstathelpers::ProblemSelector + ($problem_types)); } } -=pod -Removed code: +######################################################### +######################################################### +## +## Numerical Response Routines +## +######################################################### +######################################################### +sub NumericalResponseAnalysis { + my ($r,$problem,$problem_data,$Students) = @_; + my $c = $r->connection(); + my ($resource,$partid,$respid) = ($problem->{'resource'}, + $problem->{'part'}, + $problem->{'respid'}); + # + if (scalar(@{$resource->{'parts'}})>1) { + if (@{$resource->{'partdata'}->{$partid}->{'ResponseIds'}}>1) { + $r->print('

'. + &mt('Part [_1], response [_2].',$partid,$respid). + '

'); + } else { + $r->print('

'. + &mt('Part [_1]',$partid,$respid). + '

'); + } + } elsif (@{$resource->{'partdata'}->{$partid}->{'ResponseIds'}}>1) { + $r->print('

'.&mt('Response [_1]',$respid).'

'); + } + # + my $analysis_html; + my $PerformanceData = &Apache::loncoursedata::get_response_data + (\@Apache::lonstatistics::SelectedSections, + $Apache::lonstatistics::enrollment_status, + $resource->{'symb'},$respid); + if (! defined($PerformanceData) || + ref($PerformanceData) ne 'ARRAY' ) { + $analysis_html = '

'. + &mt('There is no submission data for this resource'). + '

'; + $r->print($analysis_html); + return; + } + # + # This next call causes all the waiting around that people complain about + my ($max,$min) = + &Apache::lonstathelpers::GetStudentAnswers($r,$problem,$Students, + 'Statistics', + 'stats_status'); + return if ($c->aborted()); + # + # Collate the data + my %Data; + foreach my $student (@$Students) { + my $answer = $student->{'answer'}; + $Data{$answer}++; + } + my @Labels = sort {$a <=> $b } keys(%Data); + my @PlotData = @Data{@Labels}; + # + my $width = 500; + my $height = 100; + my $plot = &one_dimensional_plot($r,500,100,scalar(@$Students), + \@Labels,\@PlotData); + $r->print($plot); + return; +} + +sub one_dimensional_plot { + my ($r,$width,$height,$N,$Labels,$Data)=@_; + # + # Compute data -> image scaling factors + my $min = $Labels->[0]; + my $max = $Labels->[-1]; + if ($max == $min) { + $max =$min+1; + } + my $h_scale = ($width-10)/($max-$min); + # + my $max_y = 0; + foreach (@$Data) { + $max_y = $_ if ($max_y < $_); + } + my $ticscale = 5; + if ($max_y * $ticscale > $height/2) { + $ticscale = int($height/2/$max_y); + $ticscale = 1 if ($ticscale < 1); + } + # + # Create the plot + my $plot = + qq{}; + for (my $idx=0;$idx[$idx] - $min); + my $top = $height/2-$Data->[$idx]*$ticscale; + my $bottom = $height/2+$Data->[$idx]*$ticscale; + $plot .= + &line($xloc,$top,$xloc,$bottom,'888888',1); + } + # + # Put the scale on last to ensure it is on top of the data. + if ($min < 0 && $max > 0) { + my $circle_x = 5+$h_scale*abs($min); # '0' in data coordinates + my $r = 4; + $plot .= &line(5,$height/2,$circle_x-$r,$height/2,'000000',1); + $plot .= &circle($circle_x,$height/2,$r+1,'000000'); + $plot .= &line($circle_x+$r,$height/2,$width-5,$height/2,'000000',1); + } else { + $plot .= &line(5,$height/2,$width-5,$height/2,'000000',1); + } + $plot .= ''; + my $plotresult = &Apache::lonxml::xmlparse($r,'web',$plot); + + my $title = 'Distribution of correct answers'; + my $result = ''. + ''. + ''. + ''. + ''. + ''. + ''. + ''. + '
'. + ''.$title.' (N='.$N.')'. + ''. + '
'.$min.''.$plotresult.''.$max.'
'. + 'Maximum Number of Coinciding Values: '.$max_y. + '
'; + return $result; +} + +## +## Helper subroutines for . +## These should probably go somewhere more suitable soon. +sub line { + my ($x1,$y1,$x2,$y2,$color,$thickness) = @_; + return qq{$/}; +} + +sub text { + my ($x,$y,$color,$text,$font,$direction) = @_; + if (! defined($font) || $font !~ /^(tiny|small|medium|large|giant)$/) { + $font = 'medium'; + } + if (! defined($direction) || $direction ne 'vertical') { + $direction = ''; + } + return qq{$text}; +} + +sub rectangle { + my ($x1,$y1,$x2,$y2,$color,$thickness,$filled) = @_; + return qq{}; +} + +sub arc { + my ($x,$y,$width,$height,$start,$end,$color,$thickness,$filled)=@_; + return qq{}; +} + +sub circle { + my ($x,$y,$radius,$color,$thickness,$filled)=@_; + return &arc($x,$y,$radius,$radius,0,360,$color,$thickness,$filled); +} + +sub build_student_data_worksheet { + my ($workbook,$format) = @_; + my $rows_output = 3; + my $cols_output = 0; + my $worksheet = $workbook->addworksheet('Student Data'); + $worksheet->write($rows_output++,0,'Student Data',$format->{'h3'}); + my @Headers = ('full name','username','domain','section', + "student\nnumber",'identifier'); + $worksheet->write_row($rows_output++,0,\@Headers,$format->{'header'}); + my @Students = @Apache::lonstatistics::Students; + my $studentrows = &Apache::loncoursedata::get_student_data(\@Students); + my %ids; + foreach my $row (@$studentrows) { + my ($mysqlid,$student) = @$row; + $ids{$student}=$mysqlid; + } + foreach my $student (@Students) { + my $name_domain = $student->{'username'}.':'.$student->{'domain'}; + $worksheet->write_row($rows_output++,0, + [$student->{'fullname'}, + $student->{'username'},$student->{'domain'}, + $student->{'section'},$student->{'id'}, + $ids{$name_domain}]); + } + return $worksheet; +} ######################################################### ######################################################### @@ -167,11 +377,14 @@ Removed code: ######################################################### ######################################################### sub RadioResponseAnalysis { - my ($r,$resource,$part,$respid,$ProblemData,$Students) = @_; + my ($r,$problem,$problem_data,$Students) = @_; + my ($resource,$respid) = ($problem->{'resource'}, + $problem->{'respid'}); my $analysis_html; - my $PerformanceData = - &Apache::loncoursedata::get_response_data - ($Students,$resource->{'symb'},$respid); + my $PerformanceData = &Apache::loncoursedata::get_response_data + (\@Apache::lonstatistics::SelectedSections, + $Apache::lonstatistics::enrollment_status, + $resource->{'symb'},$respid); if (! defined($PerformanceData) || ref($PerformanceData) ne 'ARRAY' ) { $analysis_html = '

'. @@ -181,52 +394,43 @@ sub RadioResponseAnalysis { return; } if (exists($ENV{'form.ExcelOutput'})) { - $analysis_html .= &RR_Excel_output($r,$resource,$PerformanceData, - $ProblemData); + $analysis_html .= &RR_Excel_output($r,$problem->{'resource'}, + $PerformanceData,$problem_data); } elsif ($ENV{'form.AnalyzeOver'} eq 'Tries') { - $analysis_html .= &RR_Tries_Analysis($r,$resource,$PerformanceData, - $ProblemData); + $analysis_html .= &RR_Tries_Analysis($r,$problem->{'resource'}, + $PerformanceData,$problem_data); } elsif ($ENV{'form.AnalyzeOver'} eq 'Time') { - $analysis_html .= &RR_Time_Analysis($r,$resource,$PerformanceData, - $ProblemData); + $analysis_html .= &RR_Time_Analysis($r,$problem->{'resource'}, + $PerformanceData,$problem_data); } else { $analysis_html .= '

'. &mt('The analysis you have selected is not supported at this time'). - '

'; + ''; } $r->print($analysis_html); } - sub RR_Excel_output { - my ($r,$PerformanceData,$ProblemData) = @_; + my ($r,$PerformanceData,$problem_data) = @_; return '

No!

'; } sub RR_Tries_Analysis { - my ($r,$resource,$PerformanceData,$ProblemData) = @_; + my ($r,$resource,$PerformanceData,$problem_data) = @_; my $analysis_html; my $mintries = 1; my $maxtries = $ENV{'form.NumPlots'}; - my ($table,$Foils,$Concepts) = &build_foil_index($ProblemData); - if ((@$Concepts < 2) && ($ENV{'form.AnalyzeAs'} ne 'Foils')) { + my ($table,$Foils,$Concepts) = &build_foil_index($problem_data); + if ((! defined($Concepts)) || (@$Concepts < 2)) { $table = '

'. &mt('Not enough data for concept analysis. '. 'Performing Foil Analysis'). '

'.$table; - $ENV{'form.AnalyzeAs'} = 'Foils'; } $analysis_html .= $table; my @TryData = &RR_tries_data_analysis($r,$PerformanceData); - if ($ENV{'form.AnalyzeAs'} eq 'Foils') { - $analysis_html = &RR_Tries_Foil_Analysis($mintries,$maxtries,$Foils, - \@TryData,$ProblemData); - } else { - $analysis_html = &RR_Tries_Concept_Analysis($mintries,$maxtries, - $Concepts, - \@TryData, - $ProblemData); - } + $analysis_html .= &RR_Tries_Foil_Analysis($mintries,$maxtries,$Foils, + \@TryData,$problem_data); return $analysis_html; } @@ -242,13 +446,13 @@ sub RR_tries_data_analysis { } sub RR_Time_Analysis { - my ($r,$PerformanceData,$ProblemData) = @_; + my ($r,$PerformanceData,$problem_data) = @_; my $html; return $html; } sub RR_Tries_Foil_Analysis { - my ($min,$max,$Foils,$TryData,$ProblemData) = @_; + my ($min,$max,$Foils,$TryData,$problem_data) = @_; my $html; # # Compute the data neccessary to make the plots @@ -256,8 +460,8 @@ sub RR_Tries_Foil_Analysis { my @PlotData_Correct; my @PlotData_Incorrect; next if ($try > scalar(@{$TryData})); - next if (! defined($TryData->[$try-1])); - my %DataSet = %{$TryData->[$try-1]}; + next if (! defined($TryData->[$try])); + my %DataSet = %{$TryData->[$try]}; my $total = 0; foreach my $foilid (@$Foils) { $total += $DataSet{$foilid}; @@ -267,7 +471,7 @@ sub RR_Tries_Foil_Analysis { push (@PlotData_Correct,0); push (@PlotData_Incorrect,0); } else { - if ($ProblemData->{'_Foils'}->{$foilid}->{'value'} eq 'true') { + if ($problem_data->{'_Foils'}->{$foilid}->{'value'} eq 'true') { push (@PlotData_Correct, int(100*$DataSet{$foilid}/$total)); push (@PlotData_Incorrect,0); @@ -278,47 +482,45 @@ sub RR_Tries_Foil_Analysis { } } } - my $title='Attempt '.$try; - my $xlabel = $total.' Submissions'; + my $title='Attempt '.$try.' (N='.$total.')'; + my $xlabel = 'Foil Chosen'; $html.= &Apache::loncommon::DrawBarGraph($title, $xlabel, 'Percent Choosing', 100, ['#33ff00','#ff3300'], + undef, \@PlotData_Correct, \@PlotData_Incorrect); } - &Apache::lonnet::logthis('plot = '.$html); return $html; } sub RR_Tries_Concept_Analysis { - my ($min,$max,$Concepts,$ResponseData,$ProblemData) = @_; + my ($min,$max,$Concepts,$ResponseData,$problem_data) = @_; my $html; return $html; } sub RR_Time_Foil_Analysis { - my ($min,$max,$Foils,$ResponseData,$ProblemData) = @_; + my ($min,$max,$Foils,$ResponseData,$problem_data) = @_; my $html; return $html; } sub RR_Time_Concept_Analysis { - my ($min,$max,$Concepts,$ResponseData,$ProblemData) = @_; + my ($min,$max,$Concepts,$ResponseData,$problem_data) = @_; my $html; return $html; } - sub get_Radio_problem_data { my ($url) = @_; my $Answ=&Apache::lonnet::ssi($url,('grade_target' => 'analyze')); (my $garbage,$Answ)=split('_HASH_REF__',$Answ,2); my %Answer = &Apache::lonnet::str2hash($Answ); my %Partdata; - &Apache::lonnet::logthis('url = '.$url); foreach my $part (@{$Answer{'parts'}}) { while (my($key,$value) = each(%Answer)) { # if (ref($value) eq 'ARRAY') { @@ -344,9 +546,6 @@ sub get_Radio_problem_data { return %Partdata; } -=cut - - ######################################################### ######################################################### ## @@ -355,10 +554,14 @@ sub get_Radio_problem_data { ######################################################### ######################################################### sub OptionResponseAnalysis { - my ($r,$resource,$resid,$ProblemData,$Students) = @_; - my $PerformanceData = - &Apache::loncoursedata::get_response_data - ($Students,$resource->{'symb'},$resid); + my ($r,$problem,$problem_data,$Students) = @_; + my ($resource,$respid) = ($problem->{'resource'}, + $problem->{'respid'}); + # Note: part data is not needed. + my $PerformanceData = &Apache::loncoursedata::get_response_data + (\@Apache::lonstatistics::SelectedSections, + $Apache::lonstatistics::enrollment_status, + $resource->{'symb'},$respid); if (! defined($PerformanceData) || ref($PerformanceData) ne 'ARRAY' ) { $r->print('

'. @@ -367,21 +570,21 @@ sub OptionResponseAnalysis { } else { $r->rflush(); if (exists($ENV{'form.ExcelOutput'})) { - my $result = &prepare_optionresponse_excel_sheet($r,$resource, - $PerformanceData, - $ProblemData); + my $result = &OR_excel_sheet($r,$resource, + $PerformanceData, + $problem_data); $r->print($result); $r->rflush(); } else { if ($ENV{'form.AnalyzeOver'} eq 'Tries') { - my $analysis_html = &tries_analysis($r, + my $analysis_html = &OR_tries_analysis($r, $PerformanceData, - $ProblemData); + $problem_data); $r->print($analysis_html); $r->rflush(); } elsif ($ENV{'form.AnalyzeOver'} eq 'Time') { - my $analysis_html = &time_analysis($PerformanceData, - $ProblemData); + my $analysis_html = &OR_time_analysis($PerformanceData, + $problem_data); $r->print($analysis_html); $r->rflush(); } else { @@ -399,180 +602,154 @@ sub OptionResponseAnalysis { # Option Response: Tries Analysis # ######################################################### -sub tries_analysis { +sub OR_tries_analysis { my ($r,$PerformanceData,$ORdata) = @_; my $mintries = 1; my $maxtries = $ENV{'form.NumPlots'}; my ($table,$Foils,$Concepts) = &build_foil_index($ORdata); - if ((@$Concepts < 2) && ($ENV{'form.AnalyzeAs'} ne 'Foils')) { - $table = '

'. - &mt('Not enough data for concept analysis. '. - 'Performing Foil Analysis'). - '

'.$table; - $ENV{'form.AnalyzeAs'} = 'Foils'; - } - my %ResponseData = &analyze_option_data_by_tries($r,$PerformanceData, + my %response_data = &OR_analyze_by_tries($r,$PerformanceData, $mintries,$maxtries); my $analysis = ''; - if ($ENV{'form.AnalyzeAs'} eq 'Foils') { - $analysis = &Tries_Foil_Analysis($mintries,$maxtries,$Foils, - \%ResponseData,$ORdata); - } else { - $analysis = &Tries_Concept_Analysis($mintries,$maxtries, - $Concepts,\%ResponseData,$ORdata); - } - $table .= $analysis; - return $table; -} - -sub Tries_Foil_Analysis { - my ($mintries,$maxtries,$Foils,$respdat,$ORdata) = @_; - my %ResponseData = %$respdat; # - # Compute the data neccessary to make the plots - my @PlotData; - foreach my $foilid (@$Foils) { - for (my $i=$mintries;$i<=$maxtries;$i++) { - if ($ResponseData{$foilid}->[$i]->{'_total'} == 0) { - push(@{$PlotData[$i]->{'_correct'}},0); - } else { - push(@{$PlotData[$i]->{'_correct'}}, - 100*$ResponseData{$foilid}->[$i]->{'_correct'}/ - $ResponseData{$foilid}->[$i]->{'_total'}); - } - foreach my $option (@{$ORdata->{'_Options'}}) { - push(@{$PlotData[$i]->{'_total'}}, - $ResponseData{$foilid}->[$i]->{'_total'}); - if ($ResponseData{$foilid}->[$i]->{'_total'} == 0) { - push (@{$PlotData[$i]->{$option}},0); + # Compute the data necessary to make the plots + my @foil_plot; + my @concept_data; + for (my $j=0;$j<=scalar(@$Concepts);$j++) { + my $concept = $Concepts->[$j]; + foreach my $foilid (@{$concept->{'foils'}}) { + for (my $try=$mintries;$try<=$maxtries;$try++) { + # concept analysis data + $concept_data[$j]->{'_correct'} += + $response_data{$foilid}->[$try]->{'_correct'}; + $concept_data[$j]->{'_total'} += + $response_data{$foilid}->[$try]->{'_total'}; + # + # foil analysis data + if ($response_data{$foilid}->[$try]->{'_total'} == 0) { + push(@{$foil_plot[$try]->{'_correct'}},0); } else { - if ($ResponseData{$foilid}->[$i]->{'_total'} == - $ResponseData{$foilid}->[$i]->{'_correct'}) { - push(@{$PlotData[$i]->{$option}},0); + push(@{$foil_plot[$try]->{'_correct'}}, + 100*$response_data{$foilid}->[$try]->{'_correct'}/ + $response_data{$foilid}->[$try]->{'_total'}); + } + foreach my $option (@{$ORdata->{'_Options'}}) { + push(@{$foil_plot[$try]->{'_total'}}, + $response_data{$foilid}->[$try]->{'_total'}); + if ($response_data{$foilid}->[$try]->{'_total'} == 0) { + push (@{$foil_plot[$try]->{$option}},0); } else { - push (@{$PlotData[$i]->{$option}}, - 100 * $ResponseData{$foilid}->[$i]->{$option} / - ($ResponseData{$foilid}->[$i]->{'_total'} - - $ResponseData{$foilid}->[$i]->{'_correct'})); + if ($response_data{$foilid}->[$try]->{'_total'} == + $response_data{$foilid}->[$try]->{'_correct'}) { + push(@{$foil_plot[$try]->{$option}},0); + } else { + push (@{$foil_plot[$try]->{$option}}, + 100 * + $response_data{$foilid}->[$try]->{$option} / + ($response_data{$foilid}->[$try]->{'_total'} + - + $response_data{$foilid}->[$try]->{'_correct'} + )); + } } - } + } # End of foreach my $option } - } - } + } # End of foreach my $foilid + } # End of concept loops # # Build a table for the plots my $analysis_html = "\n"; - my $foilkey = &build_option_index($ORdata); - for (my $i=$mintries;$i<=$maxtries;$i++) { - my $count = $ResponseData{'_total'}->[$i]; - if ($count == 0) { - $count = 'no submissions'; - } elsif ($count == 1) { - $count = '1 submission'; - } else { - $count = $count.' submissions'; + my $optionkey = &build_option_index($ORdata); + my $num_concepts = 1; + if (defined($Concepts)) { $num_concepts = scalar(@$Concepts); } + # + for (my $try=$mintries;$try<=$maxtries;$try++) { + my $concept_graph=''; + if ($num_concepts > 1) { + # + # Create concept plot + my @concept_plot_data; + for (my $j=0;$j<=$#concept_data;$j++) { + my $total = $concept_data[$j]->{'_total'}; + if ($total == 0) { + $concept_plot_data[$j] = 0; + } else { + $concept_plot_data[$j] = 100 * + sprintf('%0.3f', + $concept_data[$j]->{'_correct'} / $total); + } + } + # + my $title; + my $count = $response_data{'_total'}->[$try]; + $title = 'Attempt '.$try.' (N='.$count.')'; + $concept_graph = &Apache::loncommon::DrawBarGraph + ($title,'Concept Number','Percent Correct', + 100,$plotcolors,undef,\@concept_plot_data); } - my $title = 'Attempt '.$i.', '.$count; + # + # Create Foil Plots + my $count = $response_data{'_total'}->[$try]; + my $title = 'Attempt '.$try.' (N='.$count.')'; my @Datasets; foreach my $option ('_correct',@{$ORdata->{'_Options'}}) { - next if (! exists($PlotData[$i]->{$option})); - push(@Datasets,$PlotData[$i]->{$option}); - } - my $correctgraph = &Apache::loncommon::DrawBarGraph - ($title,'Foil Number','Percent Correct', - 100,$plotcolors,$Datasets[0]); - $analysis_html.= ''; - ## - ## - for (my $i=0; $i< scalar(@{$Datasets[0]});$i++) { - $Datasets[0]->[$i]=0; - } - $count = $ResponseData{'_total'}->[$i]-$ResponseData{'_correct'}->[$i]; - if ($count == 0) { - $count = 'no submissions'; - } elsif ($count == 1) { - $count = '1 submission'; - } else { - $count = $count.' submissions'; + next if (! exists($foil_plot[$try]->{$option})); + push(@Datasets,$foil_plot[$try]->{$option}); } - $title = 'Attempt '.$i.', '.$count; - my $incorrectgraph = &Apache::loncommon::DrawBarGraph - ($title,'Foil Number','% Option Chosen Incorrectly', - 100,$plotcolors,@Datasets); - $analysis_html.= ''; - $analysis_html.= '\n"; - } - $analysis_html .= "
'.$correctgraph.''.$incorrectgraph.''.$foilkey."
\n"; - return $analysis_html; -} - -sub Tries_Concept_Analysis { - my ($mintries,$maxtries,$Concepts,$respdat,$ORdata) = @_; - my %ResponseData = %$respdat; - my $analysis_html = "\n"; - # - # Compute the data neccessary to make the plots - my @PlotData; - # Concept analysis - # - # Note: we do not bother with characterizing the students incorrect - # answers at the concept level because an incorrect answer for one foil - # may be a correct answer for another foil. - my %ConceptData; - foreach my $concept (@{$Concepts}) { - for (my $i=$mintries;$i<=$maxtries;$i++) { - # - # Gather the per-attempt data - my $cdata = $ConceptData{$concept}->[$i]; - foreach my $foilid (@{$concept->{'foils'}}) { - $cdata->{'_correct'} += - $ResponseData{$foilid}->[$i]->{'_correct'}; - $cdata->{'_total'} += - $ResponseData{$foilid}->[$i]->{'_total'}; - } - push (@{$PlotData[$i]->{'_total'}},$cdata->{'_total'}); - if ($cdata->{'_total'} == 0) { - push (@{$PlotData[$i]->{'_correct'}},0); - } else { - push (@{$PlotData[$i]->{'_correct'}}, - 100*$cdata->{'_correct'}/$cdata->{'_total'}); + # + # Put a blank in the data set between concepts + for (my $set =0;$set<=$#Datasets;$set++) { + my @Data = @{$Datasets[$set]}; + my $idx = 0; + foreach my $concept (@{$Concepts}) { + foreach my $foilid (@{$concept->{'foils'}}) { + $Datasets[$set]->[$idx++]=shift(@Data); + } + if ($concept->{'name'} ne $Concepts->[-1]->{'name'}) { + $Datasets[$set]->[$idx++] = 0; } - } - } - # Build a table for the plots - for (my $i=$mintries;$i<=$maxtries;$i++) { - my $minstu = $PlotData[$i]->{'_total'}->[0]; - my $maxstu = $PlotData[$i]->{'_total'}->[0]; - foreach my $count (@{$PlotData[$i]->{'_total'}}) { - if ($minstu > $count) { - $minstu = $count; } - if ($maxstu < $count) { - $maxstu = $count; + } + # + # Set up the labels needed for the bar graph + my @Labels; + my $idx = 1; + foreach my $concept (@{$Concepts}) { + foreach my $foilid (@{$concept->{'foils'}}) { + push(@Labels,$idx++); } + push(@Labels,''); } - $maxstu = 0 if (! defined($maxstu)); - $minstu = 0 if (! defined($minstu)); - my $title; - my $count = $ResponseData{'_total'}->[$i]; - if ($count == 0) { - $count = 'no submissions'; - } elsif ($count == 1) { - $count = '1 submission'; - } else { - $count = $count.' submissions'; + # + my $correct_graph = &Apache::loncommon::DrawBarGraph + ($title,'Foil Number','Percent Correct', + 100,$plotcolors,\@Labels,$Datasets[0]); + + # + # + next if (! defined($Datasets[0])); + for (my $i=0; $i< scalar(@{$Datasets[0]});$i++) { + $Datasets[0]->[$i]=0; } - $title = 'Attempt '.$i.', '.$count; - my $graphlink = &Apache::loncommon::DrawBarGraph - ($title,'Concept Number','Percent Correct', - 100,$plotcolors,$PlotData[$i]->{'_correct'}); - $analysis_html.= '\n"; + $count = $response_data{'_total'}->[$try] - + $response_data{'_correct'}->[$try]; + $title = 'Attempt '.$try.' (N='.$count.')'; + my $incorrect_graph = &Apache::loncommon::DrawBarGraph + ($title,'Foil Number','% Option Chosen Incorrectly', + 100,$plotcolors,\@Labels,@Datasets); + $analysis_html.= + ''. + ''. + ''. + ''. + ''.$/; } $analysis_html .= "
'.$graphlink."
'.$concept_graph.''.$correct_graph.''.$incorrect_graph.''.$optionkey.''. + '
\n"; - return $analysis_html; + $table .= $analysis_html; + return $table; } -sub analyze_option_data_by_tries { +sub OR_analyze_by_tries { my ($r,$PerformanceData,$mintries,$maxtries) = @_; my %Trydata; $mintries = 1 if (! defined($mintries) || $mintries < 1); @@ -600,18 +777,22 @@ sub analyze_option_data_by_tries { # Option Response: Time Analysis # ######################################################### -sub time_analysis { - my ($PerformanceData,$ORdata) = @_; +sub OR_time_analysis { + my ($performance_data,$ORdata) = @_; my ($table,$Foils,$Concepts) = &build_foil_index($ORdata); - if ((@$Concepts < 2) && ($ENV{'form.AnalyzeAs'} ne 'Foils')) { + my $foilkey = &build_option_index($ORdata); + my $num_concepts = 1; + if (defined($Concepts)) { $num_concepts = scalar(@$Concepts); } + # + if ($num_concepts < 2) { $table = '

'. &mt('Not enough data for concept analysis. '. 'Performing Foil Analysis'). - '

'.$table; - $ENV{'form.AnalyzeAs'} = 'Foils'; + ''.$table; } + # my $num_plots = $ENV{'form.NumPlots'}; - my $num_data = scalar(@$PerformanceData)-1; + my $num_data = scalar(@$performance_data)-1; my $percent = sprintf('%2f',100/$num_plots); # $table .= "\n"; @@ -623,16 +804,20 @@ sub time_analysis { ('enddate_'.$i); if (! defined($starttime) || ! defined($endtime)) { my $sec_in_day = 86400; - my $last_sub_time = &get_time_from_row($PerformanceData->[-1]); + my $last_sub_time = &get_time_from_row($performance_data->[-1]); my ($sday,$smon,$syear); (undef,undef,undef,$sday,$smon,$syear) = localtime($last_sub_time - $sec_in_day*$i); $starttime = &Time::Local::timelocal(0,0,0,$sday,$smon,$syear); $endtime = $starttime + $sec_in_day; if ($i == ($num_plots -1 )) { - $starttime = &get_time_from_row($PerformanceData->[0]); + $starttime = &get_time_from_row($performance_data->[0]); } } + $table .= ''.$/; my $startdateform = &Apache::lonhtmlcommon::date_setter ('Statistics','startdate_'.$i,$starttime); my $enddateform = &Apache::lonhtmlcommon::date_setter @@ -641,13 +826,17 @@ sub time_analysis { my $begin_index; my $end_index; my $j; - while (++$j < scalar(@$PerformanceData)) { - last if (&get_time_from_row($PerformanceData->[$j]) + while (++$j < scalar(@$performance_data)) { + last if (&get_time_from_row($performance_data->[$j]) > $starttime); } $begin_index = $j; - while (++$j < scalar(@$PerformanceData)) { - last if (&get_time_from_row($PerformanceData->[$j]) > $endtime); + while ($j < scalar(@$performance_data)) { + if (&get_time_from_row($performance_data->[$j]) > $endtime) { + last; + } else { + $j++; + } } $end_index = $j; ## @@ -657,29 +846,44 @@ sub time_analysis { startdateform => $startdateform, enddateform => $enddateform, }; - if ($ENV{'form.AnalyzeAs'} eq 'Foils') { - $table .= &Foil_Time_Analysis($PerformanceData,$ORdata,$Foils, + my $concept_correct_plot = ''; + if ($num_concepts > 1) { + $concept_correct_plot = + &OR_Concept_Time_Analysis($performance_data, + $ORdata,$Concepts, $interval); - } else { - $table .= &Concept_Time_Analysis($PerformanceData,$ORdata, - $Concepts,$interval); } + my ($foil_correct_plot,$foil_incorrect_plot) = + &OR_Foil_Time_Analysis($performance_data,$ORdata, + $Foils,$Concepts,$interval); + $table .= ''. + ''. + ''. + ''. + ''.$/; + $table .= ''.$/; + $table.= ''.$/; } + $table .= '
'. + &mt('Data from [_1] to [_2]', + &Apache::lonlocal::locallocaltime($starttime), + &Apache::lonlocal::locallocaltime($endtime)).'
'.$concept_correct_plot.''.$foil_correct_plot.''.$foil_incorrect_plot.''.$foilkey.'
'. + &mt('Start time: [_1]', + $interval->{'startdateform'}).'
'. + &mt('End time: [_1]', + $interval->{'enddateform'}). + '
 
'; # return $table; } -sub Foil_Time_Analysis { - my ($PerformanceData,$ORdata,$Foils,$interval) = @_; +sub OR_Foil_Time_Analysis { + my ($performance_data,$ORdata,$Foils,$Concepts,$interval) = @_; my $analysis_html; - my $foilkey = &build_option_index($ORdata); my ($begin_index,$end_index) = ($interval->{'begin_index'}, $interval->{'end_index'}); my %TimeData; # # Compute the number getting the foils correct or incorrects for (my $j=$begin_index;$j<=$end_index;$j++) { - my $row = $PerformanceData->[$j]; + my $row = $performance_data->[$j]; next if (! defined($row)); my %Row = &Process_OR_Row($row); while (my ($foilid,$href) = each(%Row)) { @@ -692,81 +896,80 @@ sub Foil_Time_Analysis { } } } - my @Plotdata; - foreach my $foil (@$Foils) { - my $total = $TimeData{$foil}->{'_total'}; - if ($total == 0) { - push(@{$Plotdata[0]},0); - } else { - push(@{$Plotdata[0]}, - 100 * $TimeData{$foil}->{'_correct'} / $total); - } - my $total_incorrect = $total - $TimeData{$foil}->{'_correct'}; - my $optionidx = 1; - foreach my $option (@{$ORdata->{'_Options'}}) { - if ($total_incorrect == 0) { - push(@{$Plotdata[$optionidx]},0); + my @plotdata; + my @labels; + foreach my $concept (@{$Concepts}) { + foreach my $foil (@{$concept->{'foils'}}) { + push(@labels,scalar(@labels)+1); + my $total = $TimeData{$foil}->{'_total'}; + if ($total == 0) { + push(@{$plotdata[0]},0); } else { - push(@{$Plotdata[$optionidx]}, - 100 * $TimeData{$foil}->{$option} / $total_incorrect); + push(@{$plotdata[0]}, + 100 * $TimeData{$foil}->{'_correct'} / $total); } - } continue { - $optionidx++; + my $total_incorrect = $total - $TimeData{$foil}->{'_correct'}; + for (my $i=0;$i{'_Options'}});$i++) { + my $option = $ORdata->{'_Options'}->[$i]; + if ($total_incorrect == 0) { + push(@{$plotdata[$i+1]},0); + } else { + push(@{$plotdata[$i+1]}, + 100 * $TimeData{$foil}->{$option} / $total_incorrect); + } + } + } + # Put in a blank one + push(@labels,''); + push(@{$plotdata[0]},0); + for (my $i=0;$i{'_Options'}});$i++) { + push(@{$plotdata[$i+1]},0); } } # # Create the plot my $count = $end_index-$begin_index; + return ('No data','') if ($count <= 0); my $title; if ($count == 0) { $title = 'no submissions'; } elsif ($count == 1) { $title = 'one submission'; - } else { + } elsif ($count > 1) { $title = $count.' submissions'; } - my $correctplot = &Apache::loncommon::DrawBarGraph($title, + my $correct_plot = &Apache::loncommon::DrawBarGraph($title, 'Foil Number', 'Percent Correct', 100, $plotcolors, - $Plotdata[0]); - for (my $j=0; $j< scalar(@{$Plotdata[0]});$j++) { - $Plotdata[0]->[$j]=0; + undef, + $plotdata[0]); + for (my $j=0; $j< scalar(@{$plotdata[0]});$j++) { + $plotdata[0]->[$j]=0; } $count = $end_index-$begin_index-$TimeData{'_correct'}; if ($count == 0) { $title = 'no submissions'; + } elsif ($count < 0) { + return ($correct_plot,''); } elsif ($count == 1) { $title = 'one submission'; } else { $title = $count.' submissions'; } - my $incorrectplot = &Apache::loncommon::DrawBarGraph($title, + my $incorrect_plot = &Apache::loncommon::DrawBarGraph($title, 'Foil Number', 'Incorrect Option Choice', 100, $plotcolors, - @Plotdata); - $analysis_html.=''. - ''.$correctplot.''. - ''.$incorrectplot.''. - ''.$foilkey.''."\n"; - $analysis_html.= ''.''. - 'Start Time:'. - '  '.$interval->{'startdateform'}.'
'. - 'End Time  : '. - ' '.$interval->{'enddateform'}.'
'. -# 'Plot Title  :'. -# (" "x3).$interval->{'titleform'}. - ''. - "\n"; - return $analysis_html; + undef, + @plotdata); + return ($correct_plot,$incorrect_plot); } -sub Concept_Time_Analysis { - my ($PerformanceData,$ORdata,$Concepts,$interval) = @_; - my $analysis_html; +sub OR_Concept_Time_Analysis { + my ($performance_data,$ORdata,$Concepts,$interval) = @_; ## ## Determine starttime, endtime, startindex, endindex my ($begin_index,$end_index) = ($interval->{'begin_index'}, @@ -775,7 +978,7 @@ sub Concept_Time_Analysis { # # Compute the number getting the foils correct or incorrects for (my $j=$begin_index;$j<=$end_index;$j++) { - my $row = $PerformanceData->[$j]; + my $row = $performance_data->[$j]; next if (! defined($row)); my %Row = &Process_OR_Row($row); while (my ($foilid,$href) = each(%Row)) { @@ -790,7 +993,7 @@ sub Concept_Time_Analysis { } # # Put the data in plottable form - my @Plotdata; + my @plotdata; foreach my $concept (@$Concepts) { my ($total,$correct); foreach my $foil (@{$concept->{'foils'}}) { @@ -798,31 +1001,21 @@ sub Concept_Time_Analysis { $correct += $TimeData{$foil}->{'_correct'}; } if ($total == 0) { - push(@Plotdata,0); + push(@plotdata,0); } else { - push(@Plotdata,100 * $correct / $total); + push(@plotdata,100 * $correct / $total); } } # # Create the plot my $title = ($end_index - $begin_index).' submissions'; - my $correctplot = &Apache::loncommon::DrawBarGraph($title, - 'Concept Number', - 'Percent Correct', - 100, - $plotcolors, - \@Plotdata); - $analysis_html.=''. - ''.$correctplot.''. - ''. - 'Start Time:  '.$interval->{'startdateform'}.'
'. - 'End Time  : '. - ' '.$interval->{'enddateform'}.'
'. -# 'Plot Title  :'.(" "x3). -# $interval->{'titleform'}. - ''. - "\n"; - return $analysis_html; + return &Apache::loncommon::DrawBarGraph($title, + 'Concept Number', + 'Percent Correct', + 100, + $plotcolors, + undef, + \@plotdata); } ######################################################### @@ -832,8 +1025,8 @@ sub Concept_Time_Analysis { ## ######################################################### ######################################################### -sub prepare_optionresponse_excel_sheet { - my ($r,$resource,$PerformanceData,$ORdata) = @_; +sub OR_excel_sheet { + my ($r,$resource,$performance_data,$ORdata) = @_; my $response = ''; my (undef,$Foils,$Concepts) = &build_foil_index($ORdata); # @@ -852,22 +1045,11 @@ sub prepare_optionresponse_excel_sheet { } # $workbook->set_tempdir('/home/httpd/perl/tmp'); - # - # Define some potentially useful formats - my $format; - $format->{'header'} = $workbook->add_format(bold => 1, - bottom => 1, - align => 'center'); - $format->{'bold'} = $workbook->add_format(bold=>1); - $format->{'h1'} = $workbook->add_format(bold=>1, size=>18); - $format->{'h2'} = $workbook->add_format(bold=>1, size=>16); - $format->{'h3'} = $workbook->add_format(bold=>1, size=>14); - $format->{'date'} = $workbook->add_format(num_format=> - 'mmm d yyyy hh:mm AM/PM'); + my $format = &Apache::loncommon::define_excel_formats($workbook); # # Create and populate main worksheets my $problem_data_sheet = $workbook->addworksheet('Problem Data'); - my $student_data_sheet = $workbook->addworksheet('Student Data'); + my $student_data_sheet = &build_student_data_worksheet($workbook,$format); my $response_data_sheet = $workbook->addworksheet('Response Data'); foreach my $sheet ($problem_data_sheet,$student_data_sheet, $response_data_sheet) { @@ -876,17 +1058,13 @@ sub prepare_optionresponse_excel_sheet { } # my $result; - $result = &build_problem_data_worksheet($problem_data_sheet,$format, + $result = &OR_build_problem_data_worksheet($problem_data_sheet,$format, $Concepts,$ORdata); if ($result ne 'okay') { # Do something useful } - $result = &build_student_data_worksheet($student_data_sheet,$format); - if ($result ne 'okay') { - # Do something useful - } - $result = &build_response_data_worksheet($response_data_sheet,$format, - $PerformanceData,$Foils, + $result = &OR_build_response_data_worksheet($response_data_sheet,$format, + $performance_data,$Foils, $ORdata); if ($result ne 'okay') { # Do something useful @@ -904,7 +1082,7 @@ sub prepare_optionresponse_excel_sheet { return $result; } -sub build_problem_data_worksheet { +sub OR_build_problem_data_worksheet { my ($worksheet,$format,$Concepts,$ORdata) = @_; my $rows_output = 3; my $cols_output = 0; @@ -973,34 +1151,8 @@ sub build_problem_data_worksheet { return 'okay'; } -sub build_student_data_worksheet { - my ($worksheet,$format) = @_; - my $rows_output = 3; - my $cols_output = 0; - $worksheet->write($rows_output++,0,'Student Data',$format->{'h3'}); - my @Headers = ('full name','username','domain','section', - "student\nnumber",'identifier'); - $worksheet->write_row($rows_output++,0,\@Headers,$format->{'header'}); - my @Students = @Apache::lonstatistics::Students; - my $studentrows = &Apache::loncoursedata::get_student_data(\@Students); - my %ids; - foreach my $row (@$studentrows) { - my ($mysqlid,$student) = @$row; - $ids{$student}=$mysqlid; - } - foreach my $student (@Students) { - my $name_domain = $student->{'username'}.':'.$student->{'domain'}; - $worksheet->write_row($rows_output++,0, - [$student->{'fullname'}, - $student->{'username'},$student->{'domain'}, - $student->{'section'},$student->{'id'}, - $ids{$name_domain}]); - } - return; -} - -sub build_response_data_worksheet { - my ($worksheet,$format,$PerformanceData,$Foils,$ORdata)=@_; +sub OR_build_response_data_worksheet { + my ($worksheet,$format,$performance_data,$Foils,$ORdata)=@_; my $rows_output = 3; my $cols_output = 0; $worksheet->write($rows_output++,0,'Response Data',$format->{'h3'}); @@ -1013,29 +1165,29 @@ sub build_response_data_worksheet { } $worksheet->write_row($rows_output++,0,\@Headers,$format->{'header'}); # - foreach my $row (@$PerformanceData) { + foreach my $row (@$performance_data) { next if (! defined($row)); my ($student,$award,$grading,$submission,$time,$tries) = @$row; my @Foilgrades = split('&',$grading); my @Foilsubs = split('&',$submission); - my %ResponseData; + my %response_data; for (my $j=0;$j<=$#Foilgrades;$j++) { my ($foilid,$correct) = split('=',$Foilgrades[$j]); my (undef,$submission) = split('=',$Foilsubs[$j]); $submission = &Apache::lonnet::unescape($submission); - $ResponseData{$foilid.' submission'}=$submission; - $ResponseData{$foilid.' award'}=$correct; + $response_data{$foilid.' submission'}=$submission; + $response_data{$foilid.' award'}=$correct; } $worksheet->write($rows_output,$cols_output++,$student); $worksheet->write($rows_output,$cols_output++, - &calc_serial($time),$format->{'date'}); + &Apache::lonstathelpers::calc_serial($time),$format->{'date'}); $worksheet->write($rows_output,$cols_output++,$award); $worksheet->write($rows_output,$cols_output++,$tries); foreach my $foilid (@$Foils) { $worksheet->write($rows_output,$cols_output++, - $ResponseData{$foilid.' submission'}); + $response_data{$foilid.' submission'}); $worksheet->write($rows_output,$cols_output++, - $ResponseData{$foilid.' award'}); + $response_data{$foilid.' award'}); } $rows_output++; $cols_output = 0; @@ -1043,185 +1195,6 @@ sub build_response_data_worksheet { return; } - -## -## The following is copied from datecalc1.pl, part of the -## Spreadsheet::WriteExcel CPAN module. -## -## -###################################################################### -# -# Demonstration of writing date/time cells to Excel spreadsheets, -# using UNIX/Perl time as source of date/time. -# -# Copyright 2000, Andrew Benham, adsb@bigfoot.com -# -###################################################################### -# -# UNIX/Perl time is the time since the Epoch (00:00:00 GMT, 1 Jan 1970) -# measured in seconds. -# -# An Excel file can use exactly one of two different date/time systems. -# In these systems, a floating point number represents the number of days -# (and fractional parts of the day) since a start point. The floating point -# number is referred to as a 'serial'. -# The two systems ('1900' and '1904') use different starting points: -# '1900'; '1.00' is 1 Jan 1900 BUT 1900 is erroneously regarded as -# a leap year - see: -# http://support.microsoft.com/support/kb/articles/Q181/3/70.asp -# for the excuse^H^H^H^H^H^Hreason. -# '1904'; '1.00' is 2 Jan 1904. -# -# The '1904' system is the default for Apple Macs. Windows versions of -# Excel have the option to use the '1904' system. -# -# Note that Visual Basic's "DateSerial" function does NOT erroneously -# regard 1900 as a leap year, and thus its serials do not agree with -# the 1900 serials of Excel for dates before 1 Mar 1900. -# -# Note that StarOffice (at least at version 5.2) does NOT erroneously -# regard 1900 as a leap year, and thus its serials do not agree with -# the 1900 serials of Excel for dates before 1 Mar 1900. -# -###################################################################### -# -# Calculation description -# ======================= -# -# 1900 system -# ----------- -# Unix time is '0' at 00:00:00 GMT 1 Jan 1970, i.e. 70 years after 1 Jan 1900. -# Of those 70 years, 17 (1904,08,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68) -# were leap years with an extra day. -# Thus there were 17 + 70*365 days = 25567 days between 1 Jan 1900 and -# 1 Jan 1970. -# In the 1900 system, '1' is 1 Jan 1900, but as 1900 was not a leap year -# 1 Jan 1900 should really be '2', so 1 Jan 1970 is '25569'. -# -# 1904 system -# ----------- -# Unix time is '0' at 00:00:00 GMT 1 Jan 1970, i.e. 66 years after 1 Jan 1904. -# Of those 66 years, 17 (1904,08,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68) -# were leap years with an extra day. -# Thus there were 17 + 66*365 days = 24107 days between 1 Jan 1904 and -# 1 Jan 1970. -# In the 1904 system, 2 Jan 1904 being '1', 1 Jan 1970 is '24107'. -# -###################################################################### -# -# Copyright (c) 2000, Andrew Benham. -# This program is free software. It may be used, redistributed and/or -# modified under the same terms as Perl itself. -# -# Andrew Benham, adsb@bigfoot.com -# London, United Kingdom -# 11 Nov 2000 -# -###################################################################### - -# Use 1900 date system on all platforms other than Apple Mac (for which -# use 1904 date system). -my $DATE_SYSTEM = ($^O eq 'MacOS') ? 1 : 0; - -#----------------------------------------------------------- -# calc_serial() -# -# Called with (up to) 2 parameters. -# 1. Unix timestamp. If omitted, uses current time. -# 2. GMT flag. Set to '1' to return serial in GMT. -# If omitted, returns serial in appropriate timezone. -# -# Returns date/time serial according to $DATE_SYSTEM selected -#----------------------------------------------------------- -sub calc_serial { - my $time = (defined $_[0]) ? $_[0] : time(); - my $gmtflag = (defined $_[1]) ? $_[1] : 0; - - # Divide timestamp by number of seconds in a day. - # This gives a date serial with '0' on 1 Jan 1970. - my $serial = $time / 86400; - - # Adjust the date serial by the offset appropriate to the - # currently selected system (1900/1904). - if ($DATE_SYSTEM == 0) { # use 1900 system - $serial += 25569; - } else { # use 1904 system - $serial += 24107; - } - - unless ($gmtflag) { - # Now have a 'raw' serial with the right offset. But this - # gives a serial in GMT, which is false unless the timezone - # is GMT. We need to adjust the serial by the appropriate - # timezone offset. - # Calculate the appropriate timezone offset by seeing what - # the differences between localtime and gmtime for the given - # time are. - - my @gmtime = gmtime($time); - my @ltime = localtime($time); - - # For the first 7 elements of the two arrays, adjust the - # date serial where the elements differ. - for (0 .. 6) { - my $diff = $ltime[$_] - $gmtime[$_]; - if ($diff) { - $serial += _adjustment($diff,$_); - } - } - } - - # Perpetuate the error that 1900 was a leap year by decrementing - # the serial if we're using the 1900 system and the date is prior to - # 1 Mar 1900. This has the effect of making serial value '60' - # 29 Feb 1900. - - # This fix only has any effect if UNIX/Perl time on the platform - # can represent 1900. Many can't. - - unless ($DATE_SYSTEM) { - $serial-- if ($serial < 61); # '61' is 1 Mar 1900 - } - return $serial; -} - -sub _adjustment { - # Based on the difference in the localtime/gmtime array elements - # number, return the adjustment required to the serial. - - # We only look at some elements of the localtime/gmtime arrays: - # seconds unlikely to be different as all known timezones - # have an offset of integral multiples of 15 minutes, - # but it's easy to do. - # minutes will be different for timezone offsets which are - # not an exact number of hours. - # hours very likely to be different. - # weekday will differ when localtime/gmtime difference - # straddles midnight. - # - # Assume that difference between localtime and gmtime is less than - # 5 days, then don't have to do maths for day of month, month number, - # year number, etc... - - my ($delta,$element) = @_; - my $adjust = 0; - - if ($element == 0) { # Seconds - $adjust = $delta/86400; # 60 * 60 * 24 - } elsif ($element == 1) { # Minutes - $adjust = $delta/1440; # 60 * 24 - } elsif ($element == 2) { # Hours - $adjust = $delta/24; # 24 - } elsif ($element == 6) { # Day of week number - # Catch difference straddling Sat/Sun in either direction - $delta += 7 if ($delta < -4); - $delta -= 7 if ($delta > 4); - - $adjust = $delta; - } - return $adjust; -} - sub build_foil_index { my ($ORdata) = @_; return if (! exists($ORdata->{'_Foils'})); @@ -1249,16 +1222,24 @@ sub build_foil_index { ten => 10,); my $a1 = lc($a); my $b1 = lc($b); - if (exists($Numbers{$a})) { - $a1 = $Numbers{$a}; + if (exists($Numbers{$a1})) { + $a1 = $Numbers{$a1}; } - if (exists($Numbers{$b})) { - $b1 = $Numbers{$b}; + if (exists($Numbers{$b1})) { + $b1 = $Numbers{$b1}; + } + if (($a1 =~/^\d+$/) && ($b1 =~/^\d+$/)) { + return $a1 <=> $b1; + } else { + return $a1 cmp $b1; } - $a1 cmp $b1; }; my @Concepts; foreach my $concept (sort $sortfunction (keys(%Concepts))) { + if (! defined($Concepts{$concept})) { + $Concepts{$concept}=[]; +# next; + } push(@Concepts,{ name => $concept, foils => [@{$Concepts{$concept}}]}); push(@Foils,(@{$Concepts{$concept}})); @@ -1291,18 +1272,18 @@ sub build_foil_index { if (@Concepts > 1) { $table .= ''. ''.$conceptindex.''. - ''.$concept->{'name'}.''. + ''.&HTML::Entities::encode($concept->{'name'},'<>&"').''. ''.$foilindex++.''. - ''.$Foildata{$firstfoil}->{'name'}.''. + ''.&HTML::Entities::encode($Foildata{$firstfoil}->{'name'},'<>&"').''. ''.$Foildata{$firstfoil}->{'text'}.''. - ''.$Foildata{$firstfoil}->{'value'}.''. + ''.&HTML::Entities::encode($Foildata{$firstfoil}->{'value'},'<>&"').''. "\n"; } else { $table .= ''. ''.$foilindex++.''. - ''.$Foildata{$firstfoil}->{'name'}.''. + ''.&HTML::Entities::encode($Foildata{$firstfoil}->{'name'},'<>&"').''. ''.$Foildata{$firstfoil}->{'text'}.''. - ''.$Foildata{$firstfoil}->{'value'}.''. + ''.&HTML::Entities::encode($Foildata{$firstfoil}->{'value'},'<>&"').''. "\n"; } foreach my $foilid (@FoilsInConcept) { @@ -1311,16 +1292,16 @@ sub build_foil_index { ''. ''. ''.$foilindex.''. - ''.$Foildata{$foilid}->{'name'}.''. + ''.&HTML::Entities::encode($Foildata{$foilid}->{'name'},'<>&"').''. ''.$Foildata{$foilid}->{'text'}.''. - ''.$Foildata{$foilid}->{'value'}.''. + ''.&HTML::Entities::encode($Foildata{$foilid}->{'value'},'<>&"').''. "\n"; } else { $table .= ''. ''.$foilindex.''. - ''.$Foildata{$foilid}->{'name'}.''. + ''.&HTML::Entities::encode($Foildata{$foilid}->{'name'},'<>&"').''. ''.$Foildata{$foilid}->{'text'}.''. - ''.$Foildata{$foilid}->{'value'}.''. + ''.&HTML::Entities::encode($Foildata{$foilid}->{'value'},'<>&"').''. "\n"; } } continue { @@ -1345,7 +1326,7 @@ sub build_option_index { ''. ''. (' 'x4).''. - ''.$option.''. + ''.&HTML::Entities::encode($option,'<>&"').''. "\n"); } shift(@Rows); # Throw away 'correct option chosen' color @@ -1369,6 +1350,8 @@ sub CreateInterface { ## ## Build the menu my $Str = ''; + $Str .= &Apache::lonhtmlcommon::breadcrumbs + (undef,'Detailed Problem Analysis'); $Str .= ''."\n"; $Str .= ''; $Str .= ''; @@ -1400,60 +1383,55 @@ sub CreateInterface { ## ## $Str .= ''; ## ## @@ -1462,95 +1440,6 @@ sub CreateInterface { return $Str; } -sub ProblemSelector { - my $Str; - $Str = "\n
'.&mt('Sections').''; - { # These braces are here to organize the code, not scope it. - { - $Str .= ''.&mt('Analyze Over '); - $Str .= &Apache::loncommon::help_open_topic - ('Analysis_Analyze_Over'); - $Str .=''; - $Str .= '
'; - } - { - $Str .= ''.&mt('Analyze as '); - $Str .= &Apache::loncommon::help_open_topic - ('Analysis_Analyze_as'); - $Str .='
'; - } - { - $Str .= '
'.&mt('Number of Plots:'); - $Str .= &Apache::loncommon::help_open_topic - ('Analysis_num_plots'); - $Str .= ''; - } - } + ## + my $showprob_checkbox = + '
'; + ## + my $analyze_selector = ''; + $Str .= '
'.$/; + ## + my $numplots_selector = '
'; + $Str .= ''; + ## + $Str .= ''; $Str .= '
\n"; - foreach my $seq (&Apache::lonstatistics::Sequences_with_Assess()) { - next if ($seq->{'num_assess'}<1); - my $seq_str = ''; - foreach my $res (@{$seq->{'contents'}}) { - next if ($res->{'type'} ne 'assessment'); - foreach my $part (@{$res->{'parts'}}) { - my $partdata = $res->{'partdata'}->{$part}; -# &Apache::lonnet::logthis('----------------'); -# while (my ($k,$v)=each(%$partdata)) { -# if (ref($v) eq 'ARRAY') { -# &Apache::lonnet::logthis($k.' = '.join(',',@$v)); -# } else { -# &Apache::lonnet::logthis($k.' = '.$v); -# } -# } - if ((! exists($partdata->{'option'}) || - $partdata->{'option'} == 0 ) && - (! exists($partdata->{'radiobutton'}) || - $partdata->{'radiobutton'} == 0)) { - next; - } - for (my $i=0;$i{'ResponseTypes'}});$i++){ - my $respid = $partdata->{'ResponseIds'}->[$i]; - my $resptype = $partdata->{'ResponseTypes'}->[$i]; - if ($resptype eq 'option' ){ -# if ($resptype eq 'option' || $resptype eq 'radiobutton') { - my $value = - &Apache::lonnet::escape($res->{'symb'}.':'.$part. - ':'.$respid.':'.$resptype); - my $checked = ''; - if ($ENV{'form.problemchoice'} eq $value) { - $checked = 'checked '; - } - my $title = $res->{'title'}; - if (! defined($title) || $title eq '') { - ($title) = ($res->{'src'} =~ m:/([^/]*)$:); - } - $seq_str .= '\n"; - } - } - } - } - if ($seq_str ne '') { - $Str .= ''. - "\n".$seq_str; - } - } - $Str .= "
'. - ''. - ''. - ''.$title.' '; -# ''.$resptype.' '.$res->{'title'}.' '; - if ($partdata->{'option'} > 1) { - $seq_str .= &mt('response').' '.$respid; - } - $seq_str .= "
 '.$seq->{'title'}.'
\n"; - return $Str; -} - -######################################################### -######################################################### -## -## Misc functions -## -######################################################### -######################################################### -sub get_problem_symb { - my $problemstring = shift(); - my ($symb,$partid,$resid,$resptype) = - ($problemstring=~ /^(.*):([^:]*):([^:]*):([^:]*)$/); - return ($symb,$partid,$resid,$resptype); -} - -sub get_resource_from_symb { - my ($symb) = @_; - foreach my $seq (&Apache::lonstatistics::Sequences_with_Assess()) { - foreach my $res (@{$seq->{'contents'}}) { - if ($res->{'symb'} eq $symb) { - return $res; - } - } - } - return undef; -} - - ######################################################### ######################################################### ## @@ -1602,6 +1491,7 @@ sub Process_OR_Row { my @Foilsubs = split('&',$submission); for (my $j=0;$j<=$#Foilgrades;$j++) { my ($foilid,$correct) = split('=',$Foilgrades[$j]); + $foilid = &Apache::lonnet::unescape($foilid); my (undef,$submission) = split('=',$Foilsubs[$j]); if ($correct) { $RowData{$foilid}->{'_correct'}++; @@ -1614,58 +1504,6 @@ sub Process_OR_Row { return %RowData; } -## -## get problem data and put it into a useful data structure. -## note: we must force each foil and option to not begin or end with -## spaces as they are stored without such data. -## -sub get_problem_data { - my ($url) = @_; - my $Answ=&Apache::lonnet::ssi($url,('grade_target' => 'analyze')); - (my $garbage,$Answ)=split(/_HASH_REF__/,$Answ,2); - my %Answer; - %Answer=&Apache::lonnet::str2hash($Answ); - my %Partdata; - foreach my $part (@{$Answer{'parts'}}) { - while (my($key,$value) = each(%Answer)) { - next if ($key !~ /^$part/); - $key =~ s/^$part\.//; - if (ref($value) eq 'ARRAY') { - if ($key eq 'options') { - $Partdata{$part}->{'_Options'}=$value; - } elsif ($key eq 'concepts') { - $Partdata{$part}->{'_Concepts'}=$value; - } elsif ($key =~ /^concept\.(.*)$/) { - my $concept = $1; - foreach my $foil (@$value) { - $Partdata{$part}->{'_Foils'}->{$foil}->{'_Concept'}= - $concept; - } - } - } else { - if ($key=~ /^foil\.text\.(.*)$/) { - my $foil = $1; - $Partdata{$part}->{'_Foils'}->{$foil}->{'name'}=$foil; - $value =~ s/(\s*$|^\s*)//g; - $Partdata{$part}->{'_Foils'}->{$foil}->{'text'}=$value; - } elsif ($key =~ /^foil\.value\.(.*)$/) { - my $foil = $1; - $Partdata{$part}->{'_Foils'}->{$foil}->{'value'}=$value; - } - } - } - } - return %Partdata; -} - 1; __END__ - -##### -# partdata{part}->{_Foils}->{foilid}->{'name'} = $ -# ->{'text'} = $ -# ->{'value'} = $ -# ->{'_Concept'} = $ -# partdata{part}->{_Options} = @ -# partdata{part}->{_Concepts} = @