--- loncom/interface/statistics/lonproblemanalysis.pm 2003/10/10 13:35:43 1.29 +++ loncom/interface/statistics/lonproblemanalysis.pm 2003/10/16 15:24:49 1.41 @@ -1,6 +1,7 @@ # The LearningOnline Network with CAPA # -# $Id: lonproblemanalysis.pm,v 1.29 2003/10/10 13:35:43 matthew Exp $ + +# $Id: lonproblemanalysis.pm,v 1.41 2003/10/16 15:24:49 matthew Exp $ # # Copyright Michigan State University Board of Trustees # @@ -34,6 +35,12 @@ use Apache::lonhtmlcommon(); use Apache::loncoursedata(); use Apache::lonstatistics; use Apache::lonlocal; +use HTML::Entities(); + +my $plotcolors = ['#33ff00', + '#0033cc', '#990000', '#aaaa66', '#663399', '#ff9933', + '#66ccff', '#ff9999', '#cccc33', '#660000', '#33cc66', + ]; sub BuildProblemAnalysisPage { my ($r,$c)=@_; @@ -42,19 +49,44 @@ sub BuildProblemAnalysisPage { # my @Students = @Apache::lonstatistics::Students; # - if (exists($ENV{'form.problemchoice'})) { - $r->print('
'); + if (exists($ENV{'form.ClearCache'}) || + exists($ENV{'form.updatecaches'}) || + (exists($ENV{'form.firstanalysis'}) && + $ENV{'form.firstanalysis'} ne 'no')) { &Apache::lonstatistics::Gather_Full_Student_Data($r); + } + if (! exists($ENV{'form.firstanalysis'})) { + $r->print(''); + } else { + $r->print(''); + } + $r->rflush(); + if (exists($ENV{'form.problemchoice'}) && + ! exists($ENV{'form.SelectAnother'})) { + $r->print(''); + $r->print(' 'x5); + $r->print(''); + $r->print(' 'x5); + $r->print(''); + $r->print(' 'x5); + $r->print(''); + $r->print(''); + $r->print(' 'x5); + # + $r->print('
'); # my ($symb,$part,$resid) = &get_problem_symb( &Apache::lonnet::unescape($ENV{'form.problemchoice'}) ); # -# my ($firsttime,$lasttime) = -# &Apache::loncoursedata::get_timestamp_data($symb,$resid); - # my $resource = &get_resource_from_symb($symb); if (defined($resource)) { + $r->print('

'.$resource->{'src'}.'

'); my %Data = &get_problem_data($resource->{'src'}); my $ORdata = $Data{$part.'.'.$resid}; ## @@ -64,8 +96,8 @@ sub BuildProblemAnalysisPage { $base = "http://".$ENV{'SERVER_NAME'}.$base; my $rendered_problem = &Apache::lonnet::ssi_body($resource->{'src'}); - $rendered_problem =~ s/
/<\/nop>/g; + $rendered_problem =~ s/<\s*form\s*/)|<\/nop>|g; $r->print('']; - for (my $i=$mintries;$i<=$maxtries;$i++) { - push (@{$Rows[0]}, - ''); + undef(@Foils); + # Having gathered the concept information in a hash, we now translate it + # into an array because we need to be consistent about order. + # Also put the foils in order, too. + my $sortfunction = sub { + my %Numbers = (one => 1, + two => 2, + three => 3, + four => 4, + five => 5, + six => 6, + seven => 7, + eight => 8, + nine => 9, + ten => 10,); + my $a1 = $a; + my $b1 = $b; + if (exists($Numbers{lc($a)})) { + $a1 = $Numbers{lc($a)}; + } + if (exists($Numbers{lc($b)})) { + $b1 = $Numbers{lc($b)}; + } + $a1 cmp $b1; + }; + my @Concepts; + foreach my $concept (sort $sortfunction (keys(%Concepts))) { + push(@Concepts,{ name => $concept, + foils => [@{$Concepts{$concept}}]}); + push(@Foils,(@{$Concepts{$concept}})); } - $Rows[1] = ['']; - for (my $i=$mintries;$i<=$maxtries;$i++) { - push (@{$Rows[1]},('', - '', - '', - )); - } - my @PlotData; - my @CumulativePlotData; - my $index = 1; - foreach my $foilid (@Foils) { - my @Data = (''); - for (my $i=$mintries;$i<=$maxtries;$i++) { - push(@Data, - ('', - '', - '')); - # - # Gather the per-attempt data - push (@{$PlotData[$i]->{'good'}}, - $ResponseData{$foilid}->[$i]->{'percent_corr'}); - push (@{$PlotData[$i]->{'bad'}}, - 100-$ResponseData{$foilid}->[$i]->{'percent_corr'}); - } - for (my $i=0;$i<=$maxtries;$i++) { - push (@{$CumulativePlotData[$i]->{'good'}}, - $CumulativePlotData[-1]->{'good'}+ - $ResponseData{$foilid}->[$i]->{'correct'}); - push (@{$CumulativePlotData[$i]->{'bad'}}, - $CumulativePlotData[-1]->{'bad'}+ - $ResponseData{$foilid}->[$i]->{'incorrect'}); + # + # Build up the table of row labels. + my $table = '
'. ''. $rendered_problem. @@ -77,14 +109,14 @@ sub BuildProblemAnalysisPage { (\@Students,$symb,$resid); if (defined($PerformanceData) && ref($PerformanceData) eq 'ARRAY') { - if ($ENV{'form.AnalyzeBy'} eq 'Tries') { - my $analysis_html = &DoTriesAnalysis($PerformanceData, + if ($ENV{'form.AnalyzeOver'} eq 'Tries') { + my $analysis_html = &tries_analysis($PerformanceData, + $ORdata); + $r->print($analysis_html); + } elsif ($ENV{'form.AnalyzeOver'} eq 'Time') { + my $analysis_html = &time_analysis($PerformanceData, $ORdata); $r->print($analysis_html); -# } elsif ($ENV{'form.AnalyzeBy'} eq 'Time') { -# my $analysis_html = &DoTimeAnalysis($PerformanceData, -# $ORdata); -# $r->print($analysis_html); } else { $r->print('

'. &mt('The analysis you have selected is '. @@ -101,113 +133,272 @@ sub BuildProblemAnalysisPage { } $r->print('
'); } else { + $r->print(''); + $r->print(' 'x5); $r->print('

'.&mt('Please select a problem to analyze').'

'); + $r->print(&OptionResponseProblemSelector()); } - # Okay, they asked for data, so make sure we get the latest data. - $r->print(&OptionResponseProblemSelector()); } -sub DoTriesAnalysis { - my ($PerformanceData,$ORdata) = @_; - my $mintries = 1; - my $maxtries = 10; - my %ResponseData = &analyze_option_data_by_tries($PerformanceData, - $mintries,$maxtries); - my @Foils = sort(keys(%ResponseData)); - my %Row_Label; +######################################################### +######################################################### +## +## Misc interface routines use by analysis code +## +######################################################### +######################################################### +sub build_foil_index { + my ($ORdata) = @_; + return if (! exists($ORdata->{'Foils'})); + my %Foildata = %{$ORdata->{'Foils'}}; + my @Foils = sort(keys(%Foildata)); + my %Concepts; foreach my $foilid (@Foils) { - my $value = $ORdata->{'Foiltext'}->{$foilid}; -# &Apache::lonnet::logthis('row label '.$foilid.' = '.$value); - $Row_Label{$foilid} = $ORdata->{'Foiltext'}->{$foilid}; + push(@{$Concepts{$Foildata{$foilid}->{'Concept'}}}, + $foilid); } - my @Rows; - $Rows[0] = ['		 '.&mt('Attempt').' '.$i.''.&mt('Foil').''.&mt('Correct').''.&mt('Incorrect').''.&mt('Percent Correct').''.$index.' '.$Row_Label{$foilid}.''.$ResponseData{$foilid}->[$i]->{'correct'}.''.$ResponseData{$foilid}->[$i]->{'incorrect'}. - ''. - sprintf("%4.2f", - $ResponseData{$foilid}->[$i]->{'percent_corr'}). - '
'."\n"; + if (@Concepts > 1) { + $table .= ''. + ''. + ''. + ''. + ''. + ''. + ''. + "\n"; + } else { + $table .= ''. + ''. + ''. + ''. + ''. + "\n"; + } + my $conceptindex = 1; + my $foilindex = 1; + foreach my $concept (@Concepts) { + my @FoilsInConcept = @{$concept->{'foils'}}; + my $firstfoil = shift(@FoilsInConcept); + if (@Concepts > 1) { + $table .= ''. + ''. + ''. + ''. + ''. + ''. + ''. + "\n"; + } else { + $table .= ''. + ''. + ''. + ''. + ''. + "\n"; + } + foreach my $foilid (@FoilsInConcept) { + if (@Concepts > 1) { + $table .= ''. + ''. + ''. + ''. + ''. + ''. + ''. + "\n"; + } else { + $table .= ''. + ''. + ''. + ''. + ''. + "\n"; + } + } continue { + $foilindex++; } - push(@Rows,\@Data); } continue { - $index++; + $conceptindex++; } - my @Data = (''); + $table .= "
'.&mt('Concept Number').''.&mt('Concept').''.&mt('Foil Number').''.&mt('Foil Name').''.&mt('Foil Text').''.&mt('Correct Value').'
'.&mt('Foil Number').''.&mt('Foil Name').''.&mt('Foil Text').''.&mt('Correct Value').'
'.$conceptindex.''.$concept->{'name'}.''.$foilindex++.''.$Foildata{$firstfoil}->{'name'}.''.$Foildata{$firstfoil}->{'text'}.''.$Foildata{$firstfoil}->{'value'}.'
'.$foilindex++.''.$Foildata{$firstfoil}->{'name'}.''.$Foildata{$firstfoil}->{'text'}.''.$Foildata{$firstfoil}->{'value'}.'
'.$foilindex.''.$Foildata{$foilid}->{'name'}.''.$Foildata{$foilid}->{'text'}.''.$Foildata{$foilid}->{'value'}.'
'.$foilindex.''.$Foildata{$foilid}->{'name'}.''.$Foildata{$foilid}->{'text'}.''.$Foildata{$foilid}->{'value'}.'
\n"; + # + # Build option index with color stuff + return ($table,\@Foils,\@Concepts); +} + +sub build_option_index { + my ($ORdata)= @_; + my $table = "\n"; + my $optionindex = 0; + my @Rows; + foreach my $option (&mt('correct option chosen'),@{$ORdata->{'Options'}}) { + push (@Rows, + ''. + ''. + ''. + "\n"); + } + $table .= join('',reverse(@Rows)); + $table .= "
'. + (' 'x4).''.$option.'
\n"; +} + +######################################################### +######################################################### +## +## Tries Analysis +## +######################################################### +######################################################### +sub tries_analysis { + my ($PerformanceData,$ORdata) = @_; + my $mintries = 1; + my $maxtries = $ENV{'form.NumPlots'}; + my ($table,$Foils,$Concepts) = &build_foil_index($ORdata); + if ((@$Concepts < 2) && ($ENV{'form.AnalyzeAs'} ne 'Foils')) { + $table = '

'. + &mt('Not enough data for concept analysis. '. + 'Performing Foil Analysis'). + '

'.$table; + $ENV{'form.AnalyzeAs'} = 'Foils'; + } + my %ResponseData = &analyze_option_data_by_tries($PerformanceData, + $mintries,$maxtries); + # + # Compute the data neccessary to make the plots + my @PlotData; # Array which holds the data for each plot + # @{$PlotData[$try]->{'datasetname'}} holds the data for + # try $try with respect to 'datasetname'. The array is + # filled either with per-foil or per-concept data. + my ($extrakey,$xlabel,$ylabel); + if ($ENV{'form.AnalyzeAs'} eq 'Foils') { + $extrakey = &build_option_index($ORdata); + $xlabel = 'Foil Number'; + $ylabel = 'Percent Choosing Option'; + foreach my $foilid (@$Foils) { + for (my $i=$mintries;$i<=$maxtries;$i++) { + foreach my $option ('_correct',@{$ORdata->{'Options'}}) { + push(@{$PlotData[$i]->{'_total'}}, + $ResponseData{$foilid}->[$i]->{'_total'}); + if ($ResponseData{$foilid}->[$i]->{'_total'} == 0) { + push (@{$PlotData[$i]->{$option}},0); + } else { + push (@{$PlotData[$i]->{$option}}, + 100 * $ResponseData{$foilid}->[$i]->{$option} / + $ResponseData{$foilid}->[$i]->{'_total'}); + } + } + } + } + } else { + # Concept analysis + # + # Note: we do not bother with characterizing the students incorrect + # answers at the concept level because an incorrect answer for one foil + # may be a correct answer for another foil. + $extrakey = ''; + $xlabel = 'Concept Number'; + $ylabel = 'Percent Correct'; + my %ConceptData; + foreach my $concept (@{$Concepts}) { + for (my $i=$mintries;$i<=$maxtries;$i++) { + # + # Gather the per-attempt data + my $cdata = $ConceptData{$concept}->[$i]; + foreach my $foilid (@{$concept->{'foils'}}) { + $cdata->{'_correct'} += + $ResponseData{$foilid}->[$i]->{'_correct'}; + $cdata->{'_total'} += + $ResponseData{$foilid}->[$i]->{'_total'}; + } + push (@{$PlotData[$i]->{'_total'}},$cdata->{'_total'}); + if ($cdata->{'_total'} == 0) { + push (@{$PlotData[$i]->{'_correct'}},0); + } else { + push (@{$PlotData[$i]->{'_correct'}}, + 100*$cdata->{'_correct'}/$cdata->{'_total'}); + } + } + } + } # End of work to fill @PlotData + # + # Build a table for the plots + $table .= "\n"; + my @Plots; for (my $i=$mintries;$i<=$maxtries;$i++) { - my $minstu = $ResponseData{$Foils[0]}->[$i]->{'total'}; - my $maxstu = $ResponseData{$Foils[0]}->[$i]->{'total'}; - foreach my $foilid (@Foils) { - if ($minstu > $ResponseData{$foilid}->[$i]->{'total'}) { - $minstu = $ResponseData{$foilid}->[$i]->{'total'}; - } - if ($maxstu < $ResponseData{$foilid}->[$i]->{'total'}) { - $maxstu = $ResponseData{$foilid}->[$i]->{'total'}; + my $minstu = $PlotData[$i]->{'_total'}->[0]; + my $maxstu = $PlotData[$i]->{'_total'}->[0]; + foreach my $count (@{$PlotData[$i]->{'_total'}}) { + if ($minstu > $count) { + $minstu = $count; + } + if ($maxstu < $count) { + $maxstu = $count; } } - $maxstu = 0 if (! $maxstu); - $minstu = 0 if (! $minstu); - my $graphlink; + $maxstu = 0 if (! defined($maxstu)); + $minstu = 0 if (! defined($minstu)); + my $title; if ($maxstu == $minstu) { - $graphlink = &Apache::loncommon::DrawGraph - ('Attempt '.$i.', '.$maxstu.' students', - 'Foil Number', - 'Percent Correct', - 100, - $PlotData[$i]->{'good'}, - $PlotData[$i]->{'bad'}); + $title = 'Attempt '.$i.', '.$maxstu.' students'; } else { - $graphlink = &Apache::loncommon::DrawGraph - ('Attempt '.$i.', '.$minstu.'-'.$maxstu. - ' students', - 'Foil Number', - 'Percent Correct', - 100, - $PlotData[$i]->{'good'}, - $PlotData[$i]->{'bad'}); + $title = 'Attempt '.$i.', '.$minstu.'-'.$maxstu.' students'; } - push(@Data,''); + my @Datasets; + foreach my $option ('_correct',@{$ORdata->{'Options'}}) { + next if (! exists($PlotData[$i]->{$option})); + push(@Datasets,$PlotData[$i]->{$option}); + } + my $graphlink = &Apache::loncommon::DrawGraph($title, + $xlabel, + $ylabel, + 100, + $plotcolors, + @Datasets); + push(@Plots,$graphlink); } - push (@Rows,\@Data); - my $table = '
'.$graphlink.'
'."\n"; - for (my $i=0; $i <=$#Rows;$i++) { - $table .= ''.join('',@{$Rows[$i]})."\n"; + # + # Should this be something the user can set? Too many dialogs! + while (my $plotlink = shift(@Plots)) { + $table .= '\n"; } - $table .= '
'.$plotlink.''.$extrakey."
'; + $table .= "\n"; return ($table); } @@ -219,49 +410,186 @@ sub analyze_option_data_by_tries { foreach my $row (@$PerformanceData) { next if (! defined($row)); my ($grading,$submission,$time,$tries) = @$row; + next if ($grading eq 'MISSING_ANSWER'); my @Foilgrades = split('&',$grading); my @Foilsubs = split('&',$submission); for (my $numtries = 1; $numtries <= $maxtries; $numtries++) { if ($tries == $numtries) { - foreach my $foilgrade (@Foilgrades) { - my ($foilid,$correct) = split('=',$foilgrade); + for (my $i=0;$i<=$#Foilgrades;$i++) { + my ($foilid,$correct) = split('=',$Foilgrades[$i]); + my (undef,$submission) = split('=',$Foilsubs[$i]); + $submission = &Apache::lonnet::unescape($submission); if ($correct) { - $Trydata{$foilid}->[$numtries]->{'correct'}++; + $Trydata{$foilid}->[$numtries]->{'_correct'}++; } else { - $Trydata{$foilid}->[$numtries]->{'incorrect'}++; + $Trydata{$foilid}->[$numtries]->{$submission}++; } + $Trydata{$foilid}->[$numtries]->{'_total'}++; } } } } - foreach my $foilid (keys(%Trydata)) { - foreach my $tryhash (@{$Trydata{$foilid}}) { - next if ((! exists($tryhash->{'correct'}) && - ! exists($tryhash->{'incorrect'})) || - ($tryhash->{'correct'} < 1 && - $tryhash->{'incorrect'} < 1)); - $tryhash->{'total'} = $tryhash->{'correct'} + - $tryhash->{'incorrect'}; - $tryhash->{'percent_corr'} = 100 * - ($tryhash->{'correct'} / - ($tryhash->{'correct'} + $tryhash->{'incorrect'}) - ); + return %Trydata; +} + +######################################################### +######################################################### +## +## Time Analysis +## +######################################################### +######################################################### +sub time_analysis { + my ($PerformanceData,$ORdata) = @_; + my $num_plots = $ENV{'form.NumPlots'}; + my ($table,$Foils,$Concepts) = &build_foil_index($ORdata); + my $num_data = scalar(@$PerformanceData)-1; + my $percent = sprintf('%2f',100/$num_plots); + my $extratable = ''; + if ($ENV{'form.AnalyzeAs'} eq 'Foils') { + $extratable = &build_option_index($ORdata); + } + $table .= "\n"; + for (my $i=0;$i<$num_plots;$i++) { + my $starttime = &Apache::lonhtmlcommon::get_date_from_form + ('startdate_'.$i); + my $endtime = &Apache::lonhtmlcommon::get_date_from_form + ('enddate_'.$i); + my ($begin_index,$end_index,$plottitle,$plothtml,$data); + if (! defined($starttime) || ! defined($endtime)) { + $begin_index = $i*int($num_data/$num_plots); + $end_index = ($i+1)*int($num_data/$num_plots); + my $lownum = sprintf('%2.1f',$i*$percent); + $lownum =~ s/(\.0)$//; + my $highnum = sprintf('%2.1f',($i+1)*$percent); + $highnum =~ s/(\.0)$//; + $plottitle = $lownum.'% to '.$highnum.'% of submissions'; + } else { + my $j; + while (++$j < scalar(@$PerformanceData)) { + last if ($PerformanceData->[$j]->[2] > $starttime); + } + $begin_index = $j; + while (++$j < scalar(@$PerformanceData)) { + last if ($PerformanceData->[$j]->[2] > $endtime); + } + $end_index = $j; + $plottitle = $ENV{'form.plottitle_'.$i}; } + ($plothtml,$starttime,$endtime,$data) = + &analyze_option_data_by_time($PerformanceData, + $begin_index,$end_index, + $plottitle,$Foils, + $Concepts,$ORdata); + my $startdateform = &Apache::lonhtmlcommon::date_setter + ('Statistics','startdate_'.$i,$starttime); + my $enddateform = &Apache::lonhtmlcommon::date_setter + ('Statistics','enddate_'.$i,$endtime); + $table.="\n"; } - return %Trydata; + $table .="
".$plothtml.''. + "Start Time:  ".$startdateform."
". + "End Time  : "." ".$enddateform."
". + 'Plot Title  :'.(" "x3). + '
'.$extratable. + "
\n"; + return $table; } -sub get_problem_symb { - my $problemstring = shift(); - my ($symb,$partid,$resid) = ($problemstring=~ /^(.*):([^:]*):([^:]*)$/); - return ($symb,$partid,$resid); +sub analyze_option_data_by_time { + my ($PerformanceData,$begin_index, + $end_index,$description,$Foils,$Concepts,$ORdata) = @_; + my %TimeData; + # + # Get the start and end times for this segment of the plot + my $starttime = $PerformanceData->[$begin_index]->[2]; + my $endtime = $PerformanceData->[$end_index ]->[2]; + # + # Compute the number getting the foils correct or incorrects + for (my $i=$begin_index;$i<=$end_index;$i++) { + my $row = $PerformanceData->[$i]; + next if (! defined($row)); + my ($grading,$submission,$time,$tries) = @$row; + next if ($grading eq 'MISSING_ANSWER'); + my @Foilgrades = split('&',$grading); + my @Foilsubs = split('&',$submission); + for (my $j=0;$j<=$#Foilgrades;$j++) { + my ($foilid,$correct) = split('=',$Foilgrades[$j]); + my (undef,$submission) = split('=',$Foilsubs[$j]); + if ($correct) { + $TimeData{$foilid}->{'_correct'}++; + } else { + $submission = &HTML::Entities::decode($submission); + $submission =~ s/\%20/ /g; + $TimeData{$foilid}->{$submission}++; + } + $TimeData{$foilid}->{'_total'}++; + } + } + # + # Compute the total and percent correct + my @Plotdata; + my ($xlabel,$ylabel); + if ($ENV{'form.AnalyzeAs'} eq 'Foils') { + $xlabel = 'Foil Number'; + $ylabel = 'Option Chosen'; + foreach my $foil (@$Foils) { + my $total = $TimeData{$foil}->{'_total'}; + my $optionidx = 0; + foreach my $option ('_correct',@{$ORdata->{'Options'}}) { + if ($total > 0) { + push(@{$Plotdata[$optionidx]}, + 100 * $TimeData{$foil}->{$option} / $total); + } else { + push(@{$Plotdata[$optionidx]},0); + } + } continue { + $optionidx++; + } + } + } else { + $xlabel = 'Concept Number'; + $ylabel = 'Percent Correct'; + foreach my $concept (@$Concepts) { + my $correct; + my $total; + foreach my $foil (@{$concept->{'foils'}}) { + $correct+=$TimeData{$foil}->{'_correct'}; + $total +=$TimeData{$foil}->{'_total'}; + } + if ($total > 0) { + push(@{$Plotdata[0]},100 * $correct / $total); + } else { + push(@{$Plotdata[0]},0); + } + } + } + # + # Create the plot + my $graphlink = &Apache::loncommon::DrawGraph + ($description,#'Time Interval Analysis', + $xlabel, + $ylabel, + 100, + $plotcolors, + @Plotdata); + # + return ($graphlink,$starttime,$endtime,\%TimeData); } +######################################################### +######################################################### +## +## Interface +## +######################################################### +######################################################### sub CreateInterface { ## ## Environment variable initialization - if (! exists$ENV{'form.AnalyzeBy'}) { - $ENV{'form.AnalyzeBy'} = 'Tries'; + if (! exists$ENV{'form.AnalyzeOver'}) { + $ENV{'form.AnalyzeOver'} = 'Tries'; } ## ## Build the menu @@ -270,10 +598,11 @@ sub CreateInterface { $Str .= ''; $Str .= ''.&mt('Sections').''; $Str .= ''.&mt('Enrollment Status').''; - $Str .= ''.&mt('Sequences and Folders').''; - $Str .= ''.&mt('Analyze By').''; +# $Str .= ''.&mt('Sequences and Folders').''; + $Str .= ' '; $Str .= ''."\n"; - # + ## + ## $Str .= ''."\n"; $Str .= &Apache::lonstatistics::SectionSelect('Section','multiple',5); $Str .= ''; @@ -282,7 +611,7 @@ sub CreateInterface { $Str .= &Apache::lonhtmlcommon::StatusOptions(undef,undef,5); $Str .= ''; # - $Str .= ''; +# $Str .= ''; my $only_seq_with_assessments = sub { my $s=shift; if ($s->{'num_assess'} < 1) { @@ -291,31 +620,63 @@ sub CreateInterface { return 1; } }; - $Str .= &Apache::lonstatistics::MapSelect('Maps','multiple,all',5, + &Apache::lonstatistics::MapSelect('Maps','multiple,all',5, $only_seq_with_assessments); - $Str .= ''; - # + ## + ## $Str .= ''; - $Str .=''; - $Str .=''; + $Str .= '