--- loncom/interface/statistics/lonproblemanalysis.pm 2003/10/20 20:42:39 1.43 +++ loncom/interface/statistics/lonproblemanalysis.pm 2004/03/22 17:25:27 1.82 @@ -1,6 +1,6 @@ # The LearningOnline Network with CAPA # -# $Id: lonproblemanalysis.pm,v 1.43 2003/10/20 20:42:39 matthew Exp $ +# $Id: lonproblemanalysis.pm,v 1.82 2004/03/22 17:25:27 matthew Exp $ # # Copyright Michigan State University Board of Trustees # @@ -24,7 +24,6 @@ # # http://www.lon-capa.org/ # - package Apache::lonproblemanalysis; use strict; @@ -34,6 +33,8 @@ use Apache::lonhtmlcommon(); use Apache::loncoursedata(); use Apache::lonstatistics; use Apache::lonlocal; +use Apache::lonstathelpers(); +use Apache::lonstudentsubmissions(); use HTML::Entities(); use Time::Local(); use Spreadsheet::WriteExcel(); @@ -43,13 +44,48 @@ my $plotcolors = ['#33ff00', '#66ccff', '#ff9999', '#cccc33', '#660000', '#33cc66', ]; +my @SubmitButtons = ({ name => 'PrevProblemAnalysis', + text => 'Previous Problem' }, + { name => 'ProblemAnalysis', + text => 'Analyze Problem Again' }, + { name => 'NextProblemAnalysis', + text => 'Next Problem' }, + { name => 'break'}, + { name => 'ClearCache', + text => 'Clear Caches' }, + { name => 'updatecaches', + text => 'Update Student Data' }, + { name => 'SelectAnother', + text => 'Choose a different Problem' }, + { name => 'ExcelOutput', + text => 'Produce Excel Output' }); + + sub BuildProblemAnalysisPage { my ($r,$c)=@_; - $r->print('

'.&mt('Option Response Problem Analysis').'

'); + # + my %Saveable_Parameters = ('Status' => 'scalar', + 'Section' => 'array', + 'NumPlots' => 'scalar', + 'AnalyzeAs' => 'scalar', + 'AnalyzeOver' => 'scalar', + ); + &Apache::loncommon::store_course_settings('problem_analysis', + \%Saveable_Parameters); + &Apache::loncommon::restore_course_settings('problem_analysis', + \%Saveable_Parameters); + # + &Apache::lonstatistics::PrepareClasslist(); + # $r->print(&CreateInterface()); # my @Students = @Apache::lonstatistics::Students; # + if (@Students < 1) { + $r->print('

There are no students in the sections selected

'); + } + # + &Apache::loncoursedata::clear_internal_caches(); if (exists($ENV{'form.ClearCache'}) || exists($ENV{'form.updatecaches'}) || (exists($ENV{'form.firstanalysis'}) && @@ -62,89 +98,82 @@ sub BuildProblemAnalysisPage { $r->print(''); } $r->rflush(); + # + my $problem_types = '(option|radiobutton|numerical)'; if (exists($ENV{'form.problemchoice'}) && ! exists($ENV{'form.SelectAnother'})) { - $r->print(''); - $r->print(' 'x5); - $r->print(''); - $r->print(' 'x5); - $r->print(''); - $r->print(' 'x5); - $r->print(''); - $r->print(''); - $r->print(' 'x5); - $r->print(''); - $r->print(' 'x5); + foreach my $button (@SubmitButtons) { + if ($button->{'name'} eq 'break') { + $r->print("
\n"); + } else { + $r->print(''); + $r->print(' 'x5); + } + } # $r->print('
'); - # - my ($symb,$part,$resid) = &get_problem_symb( - &Apache::lonnet::unescape($ENV{'form.problemchoice'}) - ); $r->rflush(); # - my $resource = &get_resource_from_symb($symb); - if (defined($resource)) { + # Determine which problem we are to analyze + my $current_problem = &Apache::lonstathelpers::get_target_from_id + ($ENV{'form.problemchoice'}); + # + my ($prev,$curr,$next) = + &Apache::lonstathelpers::get_prev_curr_next($current_problem, + $problem_types, + 'response', + ); + if (exists($ENV{'form.PrevProblemAnalysis'}) && defined($prev)) { + $current_problem = $prev; + } elsif (exists($ENV{'form.NextProblemAnalysis'}) && defined($next)) { + $current_problem = $next; + } else { + $current_problem = $curr; + } + # + # Store the current problem choice and send it out in the form + $ENV{'form.problemchoice'} = + &Apache::lonstathelpers::make_target_id($current_problem); + $r->print(''); + # + if (! defined($current_problem->{'resource'})) { + $r->print('resource is undefined'); + } else { + my $resource = $current_problem->{'resource'}; + $r->print('

'.$resource->{'title'}.'

'); $r->print('

'.$resource->{'src'}.'

'); - my %Data = &get_problem_data($resource->{'src'}); - my $PerformanceData = - &Apache::loncoursedata::get_optionresponse_data - (\@Students,$symb,$resid); - my $ORdata = $Data{$part.'.'.$resid}; - if (exists($ENV{'form.ExcelOutput'}) && - defined($PerformanceData)) { - my $result = &prepare_excel_sheet($r,$resource, - $PerformanceData,$ORdata); - $r->print($result); - $r->rflush(); - } - ## - ## Render the problem - my $base; - ($base,undef) = ($resource->{'src'} =~ m|(.*/)[^/]*$|); - $base = "http://".$ENV{'SERVER_NAME'}.$base; - my $rendered_problem = - &Apache::lonnet::ssi_body($resource->{'src'}); - $rendered_problem =~ s/<\s*form\s*/)|<\/nop>|g; - $r->print('
'. - ''. - $rendered_problem. - '
'); + $r->print(&Apache::lonstathelpers::render_resource($resource)); $r->rflush(); - ## - ## Analyze the problem - if (defined($PerformanceData) && - ref($PerformanceData) eq 'ARRAY') { - if ($ENV{'form.AnalyzeOver'} eq 'Tries') { - my $analysis_html = &tries_analysis($r,$PerformanceData, - $ORdata); - $r->print($analysis_html); - $r->rflush(); - } elsif ($ENV{'form.AnalyzeOver'} eq 'Time') { - my $analysis_html = &time_analysis($PerformanceData, - $ORdata); - $r->print($analysis_html); - $r->rflush(); - } else { - $r->print('

'. - &mt('The analysis you have selected is '. - 'not supported at this time'). - '

'); + my %Data = &Apache::lonstathelpers::get_problem_data + ($resource->{'src'}); + my $ProblemData = $Data{$current_problem->{'part'}. + '.'. + $current_problem->{'respid'}}; + if ($current_problem->{'resptype'} eq 'option') { + &OptionResponseAnalysis($r,$current_problem, + $ProblemData, + \@Students); + } elsif ($current_problem->{'resptype'} eq 'radiobutton') { + &RadioResponseAnalysis($r,$current_problem, + $ProblemData, + \@Students); + } elsif ($current_problem->{'resptype'} eq 'numerical') { + ## + ## analyze all responses of a problem at once + my $res = $current_problem->{'resource'}; + foreach my $partid (@{$res->{'parts'}}) { + $current_problem->{'part'} = $partid; + foreach my $respid (@{$res->{'partdata'}->{$partid}->{'ResponseIds'}}) { + $current_problem->{'respid'}=$respid; + &NumericalResponseAnalysis($r,$current_problem, + $ProblemData,\@Students); + } } } else { - $r->print('

'. - &mt('There is no student data for this problem.'). - '

'); + $r->print('

This analysis is not supported

'); } - } else { - $r->print('resource is undefined'); } $r->print('
'); } else { @@ -152,263 +181,570 @@ sub BuildProblemAnalysisPage { &mt('Analyze Problem').'" />'); $r->print(' 'x5); $r->print('

'.&mt('Please select a problem to analyze').'

'); - $r->print(&OptionResponseProblemSelector()); + $r->print(&Apache::lonstathelpers::ProblemSelector + ($problem_types)); } } + ######################################################### ######################################################### ## -## Misc interface routines use by analysis code +## Numerical Response Routines ## ######################################################### ######################################################### -sub build_foil_index { - my ($ORdata) = @_; - return if (! exists($ORdata->{'Foils'})); - my %Foildata = %{$ORdata->{'Foils'}}; - my @Foils = sort(keys(%Foildata)); - my %Concepts; - foreach my $foilid (@Foils) { - push(@{$Concepts{$Foildata{$foilid}->{'Concept'}}}, - $foilid); - } - undef(@Foils); - # Having gathered the concept information in a hash, we now translate it - # into an array because we need to be consistent about order. - # Also put the foils in order, too. - my $sortfunction = sub { - my %Numbers = (one => 1, - two => 2, - three => 3, - four => 4, - five => 5, - six => 6, - seven => 7, - eight => 8, - nine => 9, - ten => 10,); - my $a1 = lc($a); - my $b1 = lc($b); - if (exists($Numbers{$a})) { - $a1 = $Numbers{$a}; - } - if (exists($Numbers{$b})) { - $b1 = $Numbers{$b}; +sub NumericalResponseAnalysis { + my ($r,$problem,$ProblemData,$Students) = @_; + my $c = $r->connection(); + my ($resource,$partid,$respid) = ($problem->{'resource'}, + $problem->{'part'}, + $problem->{'respid'}); + # + if (scalar(@{$resource->{'parts'}})>1) { + if (@{$resource->{'partdata'}->{$partid}->{'ResponseIds'}}>1) { + $r->print('

'. + &mt('Part [_1], response [_2].',$partid,$respid). + '

'); + } else { + $r->print('

'. + &mt('Part [_1]',$partid,$respid). + '

'); } - $a1 cmp $b1; - }; - my @Concepts; - foreach my $concept (sort $sortfunction (keys(%Concepts))) { - push(@Concepts,{ name => $concept, - foils => [@{$Concepts{$concept}}]}); - push(@Foils,(@{$Concepts{$concept}})); + } elsif (@{$resource->{'partdata'}->{$partid}->{'ResponseIds'}}>1) { + $r->print('

'.&mt('Response [_1]',$respid).'

'); } # - # Build up the table of row labels. - my $table = ''."\n"; - if (@Concepts > 1) { - $table .= ''. - ''. - ''. - ''. - ''. - ''. - ''. - "\n"; + my $analysis_html; + my $PerformanceData = &Apache::loncoursedata::get_response_data + (\@Apache::lonstatistics::SelectedSections, + $Apache::lonstatistics::enrollment_status, + $resource->{'symb'},$respid); + if (! defined($PerformanceData) || + ref($PerformanceData) ne 'ARRAY' ) { + $analysis_html = '

'. + &mt('There is no submission data for this resource'). + '

'; + $r->print($analysis_html); + return; + } + # + # This next call causes all the waiting around that people complain about + my ($max,$min) = &Apache::lonstathelpers::GetStudentAnswers($r,$problem, + $Students); + return if ($c->aborted()); + # + # Collate the data + my %Data; + foreach my $student (@$Students) { + my $answer = $student->{'answer'}; + $Data{$answer}++; + } + my @Labels = sort {$a <=> $b } keys(%Data); + my @PlotData = @Data{@Labels}; + # + my $width = 500; + my $height = 100; + my $plot = &one_dimensional_plot($r,500,100,scalar(@$Students), + \@Labels,\@PlotData); + $r->print($plot); + return; +} + +sub one_dimensional_plot { + my ($r,$width,$height,$N,$Labels,$Data)=@_; + # + # Compute data -> image scaling factors + my $min = $Labels->[0]; + my $max = $Labels->[-1]; + if ($max == $min) { + $max =$min+1; + } + my $h_scale = ($width-10)/($max-$min); + # + my $max_y = 0; + foreach (@$Data) { + $max_y = $_ if ($max_y < $_); + } + my $ticscale = 5; + if ($max_y * $ticscale > $height/2) { + $ticscale = int($height/2/$max_y); + $ticscale = 1 if ($ticscale < 1); + } + # + # Create the plot + my $plot = + qq{}; + for (my $idx=0;$idx[$idx] - $min); + my $top = $height/2-$Data->[$idx]*$ticscale; + my $bottom = $height/2+$Data->[$idx]*$ticscale; + $plot .= + &line($xloc,$top,$xloc,$bottom,'888888',1); + } + # + # Put the scale on last to ensure it is on top of the data. + if ($min < 0 && $max > 0) { + my $circle_x = 5+$h_scale*abs($min); # '0' in data coordinates + my $r = 4; + $plot .= &line(5,$height/2,$circle_x-$r,$height/2,'000000',1); + $plot .= &circle($circle_x,$height/2,$r+1,'000000'); + $plot .= &line($circle_x+$r,$height/2,$width-5,$height/2,'000000',1); } else { - $table .= ''. - ''. - ''. - ''. - ''. - "\n"; - } - my $conceptindex = 1; - my $foilindex = 1; - foreach my $concept (@Concepts) { - my @FoilsInConcept = @{$concept->{'foils'}}; - my $firstfoil = shift(@FoilsInConcept); - if (@Concepts > 1) { - $table .= ''. - ''. - ''. - ''. - ''. - ''. - ''. - "\n"; - } else { - $table .= ''. - ''. - ''. - ''. - ''. - "\n"; + $plot .= &line(5,$height/2,$width-5,$height/2,'000000',1); + } + $plot .= ''; + my $plotresult = &Apache::lonxml::xmlparse($r,'web',$plot); + + my $title = 'Distribution of correct answers'; + my $result = '
'.&mt('Concept Number').''.&mt('Concept').''.&mt('Foil Number').''.&mt('Foil Name').''.&mt('Foil Text').''.&mt('Correct Value').'
'.&mt('Foil Number').''.&mt('Foil Name').''.&mt('Foil Text').''.&mt('Correct Value').'
'.$conceptindex.''.$concept->{'name'}.''.$foilindex++.''.$Foildata{$firstfoil}->{'name'}.''.$Foildata{$firstfoil}->{'text'}.''.$Foildata{$firstfoil}->{'value'}.'
'.$foilindex++.''.$Foildata{$firstfoil}->{'name'}.''.$Foildata{$firstfoil}->{'text'}.''.$Foildata{$firstfoil}->{'value'}.'
'. + ''. + ''. + ''. + ''. + ''. + ''. + ''. + '
'. + ''.$title.' (N='.$N.')'. + ''. + '
'.$min.''.$plotresult.''.$max.'
'. + 'Maximum Number of Coinciding Values: '.$max_y. + '
'; + return $result; +} + +## +## Helper subroutines for . +## These should probably go somewhere more suitable soon. +sub line { + my ($x1,$y1,$x2,$y2,$color,$thickness) = @_; + return qq{$/}; +} + +sub text { + my ($x,$y,$color,$text,$font,$direction) = @_; + if (! defined($font) || $font !~ /^(tiny|small|medium|large|giant)$/) { + $font = 'medium'; + } + if (! defined($direction) || $direction ne 'vertical') { + $direction = ''; + } + return qq{$text}; +} + +sub rectangle { + my ($x1,$y1,$x2,$y2,$color,$thickness,$filled) = @_; + return qq{}; +} + +sub arc { + my ($x,$y,$width,$height,$start,$end,$color,$thickness,$filled)=@_; + return qq{}; +} + +sub circle { + my ($x,$y,$radius,$color,$thickness,$filled)=@_; + return &arc($x,$y,$radius,$radius,0,360,$color,$thickness,$filled); +} + +sub build_student_data_worksheet { + my ($workbook,$format) = @_; + my $rows_output = 3; + my $cols_output = 0; + my $worksheet = $workbook->addworksheet('Student Data'); + $worksheet->write($rows_output++,0,'Student Data',$format->{'h3'}); + my @Headers = ('full name','username','domain','section', + "student\nnumber",'identifier'); + $worksheet->write_row($rows_output++,0,\@Headers,$format->{'header'}); + my @Students = @Apache::lonstatistics::Students; + my $studentrows = &Apache::loncoursedata::get_student_data(\@Students); + my %ids; + foreach my $row (@$studentrows) { + my ($mysqlid,$student) = @$row; + $ids{$student}=$mysqlid; + } + foreach my $student (@Students) { + my $name_domain = $student->{'username'}.':'.$student->{'domain'}; + $worksheet->write_row($rows_output++,0, + [$student->{'fullname'}, + $student->{'username'},$student->{'domain'}, + $student->{'section'},$student->{'id'}, + $ids{$name_domain}]); + } + return $worksheet; +} + +######################################################### +######################################################### +## +## Radio Response Routines +## +######################################################### +######################################################### +sub RadioResponseAnalysis { + my ($r,$problem,$ProblemData,$Students) = @_; + my ($resource,$respid) = ($problem->{'resource'}, + $problem->{'respid'}); + my $analysis_html; + my $PerformanceData = &Apache::loncoursedata::get_response_data + (\@Apache::lonstatistics::SelectedSections, + $Apache::lonstatistics::enrollment_status, + $resource->{'symb'},$respid); + if (! defined($PerformanceData) || + ref($PerformanceData) ne 'ARRAY' ) { + $analysis_html = '

'. + &mt('There is no submission data for this resource'). + '

'; + $r->print($analysis_html); + return; + } + if (exists($ENV{'form.ExcelOutput'})) { + $analysis_html .= &RR_Excel_output($r,$problem->{'resource'}, + $PerformanceData,$ProblemData); + } elsif ($ENV{'form.AnalyzeOver'} eq 'Tries') { + $analysis_html .= &RR_Tries_Analysis($r,$problem->{'resource'}, + $PerformanceData,$ProblemData); + } elsif ($ENV{'form.AnalyzeOver'} eq 'Time') { + $analysis_html .= &RR_Time_Analysis($r,$problem->{'resource'}, + $PerformanceData,$ProblemData); + } else { + $analysis_html .= '

'. + &mt('The analysis you have selected is not supported at this time'). + '

'; + } + $r->print($analysis_html); +} + +sub RR_Excel_output { + my ($r,$PerformanceData,$ProblemData) = @_; + return '

No!

'; +} + +sub RR_Tries_Analysis { + my ($r,$resource,$PerformanceData,$ProblemData) = @_; + my $analysis_html; + my $mintries = 1; + my $maxtries = $ENV{'form.NumPlots'}; + my ($table,$Foils,$Concepts) = &build_foil_index($ProblemData); + if ((! defined($Concepts)) || ((@$Concepts < 2) && + ($ENV{'form.AnalyzeAs'} ne 'Foils'))) { + $table = '

'. + &mt('Not enough data for concept analysis. '. + 'Performing Foil Analysis'). + '

'.$table; + $ENV{'form.AnalyzeAs'} = 'Foils'; + } + $analysis_html .= $table; + my @TryData = &RR_tries_data_analysis($r,$PerformanceData); +# if ($ENV{'form.AnalyzeAs'} eq 'Foils') { + $analysis_html .= &RR_Tries_Foil_Analysis($mintries,$maxtries,$Foils, + \@TryData,$ProblemData); +# } else { +# $analysis_html = &RR_Tries_Concept_Analysis($mintries,$maxtries, +# $Concepts, +# \@TryData, +# $ProblemData); +# } + return $analysis_html; +} + +sub RR_tries_data_analysis { + my ($r,$Attempt_data) = @_; + my @TryData; + foreach my $attempt (@$Attempt_data) { + my %Attempt = &hashify_attempt($attempt); + my ($answer,undef) = split('=',$Attempt{'submission'}); + $TryData[$Attempt{'tries'}]->{$answer}++; + } + return @TryData; +} + +sub RR_Time_Analysis { + my ($r,$PerformanceData,$ProblemData) = @_; + my $html; + return $html; +} + +sub RR_Tries_Foil_Analysis { + my ($min,$max,$Foils,$TryData,$ProblemData) = @_; + my $html; + # + # Compute the data neccessary to make the plots + for (my $try=$min;$try<=$max;$try++) { + my @PlotData_Correct; + my @PlotData_Incorrect; + next if ($try > scalar(@{$TryData})); + next if (! defined($TryData->[$try])); + my %DataSet = %{$TryData->[$try]}; + my $total = 0; + foreach my $foilid (@$Foils) { + $total += $DataSet{$foilid}; } - foreach my $foilid (@FoilsInConcept) { - if (@Concepts > 1) { - $table .= ''. - ''. - ''. - ''.$foilindex.''. - ''.$Foildata{$foilid}->{'name'}.''. - ''.$Foildata{$foilid}->{'text'}.''. - ''.$Foildata{$foilid}->{'value'}.''. - "\n"; + foreach my $foilid (@$Foils) { + if ($total == 0) { + push (@PlotData_Correct,0); + push (@PlotData_Incorrect,0); } else { - $table .= ''. - ''.$foilindex.''. - ''.$Foildata{$foilid}->{'name'}.''. - ''.$Foildata{$foilid}->{'text'}.''. - ''.$Foildata{$foilid}->{'value'}.''. - "\n"; - } - } continue { - $foilindex++; + if ($ProblemData->{'_Foils'}->{$foilid}->{'value'} eq 'true') { + push (@PlotData_Correct, + int(100*$DataSet{$foilid}/$total)); + push (@PlotData_Incorrect,0); + } else { + push (@PlotData_Correct,0); + push (@PlotData_Incorrect, + int(100*$DataSet{$foilid}/$total)); + } + } } - } continue { - $conceptindex++; + my $title='Attempt '.$try; + my $xlabel = $total.' Submissions'; + $html.= &Apache::loncommon::DrawBarGraph($title, + $xlabel, + 'Percent Choosing', + 100, + ['#33ff00','#ff3300'], + undef, + \@PlotData_Correct, + \@PlotData_Incorrect); } - $table .= "\n"; - # - # Build option index with color stuff - return ($table,\@Foils,\@Concepts); + return $html; } -sub build_option_index { - my ($ORdata)= @_; - my $table = "\n"; - my $optionindex = 0; - my @Rows; - foreach my $option (&mt('correct option chosen'),@{$ORdata->{'Options'}}) { - push (@Rows, - ''. - ''. - ''. - "\n"); +sub RR_Tries_Concept_Analysis { + my ($min,$max,$Concepts,$ResponseData,$ProblemData) = @_; + my $html; + return $html; +} + +sub RR_Time_Foil_Analysis { + my ($min,$max,$Foils,$ResponseData,$ProblemData) = @_; + my $html; + return $html; +} + +sub RR_Time_Concept_Analysis { + my ($min,$max,$Concepts,$ResponseData,$ProblemData) = @_; + my $html; + return $html; +} + + +sub get_Radio_problem_data { + my ($url) = @_; + my $Answ=&Apache::lonnet::ssi($url,('grade_target' => 'analyze')); + (my $garbage,$Answ)=split('_HASH_REF__',$Answ,2); + my %Answer = &Apache::lonnet::str2hash($Answ); + my %Partdata; + foreach my $part (@{$Answer{'parts'}}) { + while (my($key,$value) = each(%Answer)) { +# if (ref($value) eq 'ARRAY') { +# &Apache::lonnet::logthis('is ref part:'.$part.' '.$key.'='.join(',',@$value)); +# } else { +# &Apache::lonnet::logthis('notref part:'.$part.' '.$key.'='.$value); +# } + next if ($key !~ /^$part/); + $key =~ s/^$part\.//; + if ($key eq 'foils') { + $Partdata{$part}->{'_Foils'}=$value; + } elsif ($key eq 'options') { + $Partdata{$part}->{'_Options'}=$value; + } elsif ($key eq 'shown') { + $Partdata{$part}->{'_Shown'}=$value; + } elsif ($key =~ /^foil.value.(.*)$/) { + $Partdata{$part}->{$1}->{'value'}=$value; + } elsif ($key =~ /^foil.text.(.*)$/) { + $Partdata{$part}->{$1}->{'text'}=$value; + } + } } - shift(@Rows); # Throw away 'correct option chosen' color - $table .= join('',reverse(@Rows)); - $table .= "
'. - (' 'x4).''.$option.'
\n"; + return %Partdata; } ######################################################### ######################################################### ## -## Tries Analysis +## Option Response Routines ## ######################################################### ######################################################### -sub tries_analysis { +sub OptionResponseAnalysis { + my ($r,$problem,$ProblemData,$Students) = @_; + my ($resource,$respid) = ($problem->{'resource'}, + $problem->{'respid'}); + # Note: part data is not needed. + my $PerformanceData = &Apache::loncoursedata::get_response_data + (\@Apache::lonstatistics::SelectedSections, + $Apache::lonstatistics::enrollment_status, + $resource->{'symb'},$respid); + if (! defined($PerformanceData) || + ref($PerformanceData) ne 'ARRAY' ) { + $r->print('

'. + &mt('There is no student data for this problem.'). + '

'); + } else { + $r->rflush(); + if (exists($ENV{'form.ExcelOutput'})) { + my $result = &OR_excel_sheet($r,$resource, + $PerformanceData, + $ProblemData); + $r->print($result); + $r->rflush(); + } else { + if ($ENV{'form.AnalyzeOver'} eq 'Tries') { + my $analysis_html = &OR_tries_analysis($r, + $PerformanceData, + $ProblemData); + $r->print($analysis_html); + $r->rflush(); + } elsif ($ENV{'form.AnalyzeOver'} eq 'Time') { + my $analysis_html = &OR_time_analysis($PerformanceData, + $ProblemData); + $r->print($analysis_html); + $r->rflush(); + } else { + $r->print('

'. + &mt('The analysis you have selected is '. + 'not supported at this time'). + '

'); + } + } + } +} + +######################################################### +# +# Option Response: Tries Analysis +# +######################################################### +sub OR_tries_analysis { my ($r,$PerformanceData,$ORdata) = @_; my $mintries = 1; my $maxtries = $ENV{'form.NumPlots'}; my ($table,$Foils,$Concepts) = &build_foil_index($ORdata); - if ((@$Concepts < 2) && ($ENV{'form.AnalyzeAs'} ne 'Foils')) { + if (! defined($Concepts) || + ((@$Concepts < 2) && ($ENV{'form.AnalyzeAs'} ne 'Foils'))) { $table = '

'. &mt('Not enough data for concept analysis. '. 'Performing Foil Analysis'). '

'.$table; $ENV{'form.AnalyzeAs'} = 'Foils'; } - my %ResponseData = &analyze_option_data_by_tries($r,$PerformanceData, + my %ResponseData = &OR_analyze_by_tries($r,$PerformanceData, $mintries,$maxtries); my $analysis = ''; if ($ENV{'form.AnalyzeAs'} eq 'Foils') { - $analysis = &Tries_Foil_Analysis($mintries,$maxtries,$Foils, + $analysis = &OR_Tries_Foil_Analysis($mintries,$maxtries,$Concepts, \%ResponseData,$ORdata); } else { - $analysis = &Tries_Concept_Analysis($mintries,$maxtries, + $analysis = &OR_Tries_Concept_Analysis($mintries,$maxtries, $Concepts,\%ResponseData,$ORdata); } $table .= $analysis; return $table; } -sub Tries_Foil_Analysis { - my ($mintries,$maxtries,$Foils,$respdat,$ORdata) = @_; +sub OR_Tries_Foil_Analysis { + my ($mintries,$maxtries,$Concepts,$respdat,$ORdata) = @_; my %ResponseData = %$respdat; # # Compute the data neccessary to make the plots my @PlotData; - foreach my $foilid (@$Foils) { - for (my $i=$mintries;$i<=$maxtries;$i++) { - if ($ResponseData{$foilid}->[$i]->{'_total'} == 0) { - push(@{$PlotData[$i]->{'_correct'}},0); - } else { - push(@{$PlotData[$i]->{'_correct'}}, - 100*$ResponseData{$foilid}->[$i]->{'_correct'}/ - $ResponseData{$foilid}->[$i]->{'_total'}); - } - foreach my $option (@{$ORdata->{'Options'}}) { - push(@{$PlotData[$i]->{'_total'}}, - $ResponseData{$foilid}->[$i]->{'_total'}); - if ($ResponseData{$foilid}->[$i]->{'_total'} == 0) { - push (@{$PlotData[$i]->{$option}},0); + foreach my $concept (@$Concepts) { + foreach my $foilid (@{$concept->{'foils'}}) { + for (my $try=$mintries;$try<=$maxtries;$try++) { + if ($ResponseData{$foilid}->[$try]->{'_total'} == 0) { + push(@{$PlotData[$try]->{'_correct'}},0); } else { - if ($ResponseData{$foilid}->[$i]->{'_total'} == - $ResponseData{$foilid}->[$i]->{'_correct'}) { - push(@{$PlotData[$i]->{$option}},0); + push(@{$PlotData[$try]->{'_correct'}}, + 100*$ResponseData{$foilid}->[$try]->{'_correct'}/ + $ResponseData{$foilid}->[$try]->{'_total'}); + } + foreach my $option (@{$ORdata->{'_Options'}}) { + push(@{$PlotData[$try]->{'_total'}}, + $ResponseData{$foilid}->[$try]->{'_total'}); + if ($ResponseData{$foilid}->[$try]->{'_total'} == 0) { + push (@{$PlotData[$try]->{$option}},0); } else { - push (@{$PlotData[$i]->{$option}}, - 100 * $ResponseData{$foilid}->[$i]->{$option} / - ($ResponseData{$foilid}->[$i]->{'_total'} - - $ResponseData{$foilid}->[$i]->{'_correct'})); + if ($ResponseData{$foilid}->[$try]->{'_total'} == + $ResponseData{$foilid}->[$try]->{'_correct'}) { + push(@{$PlotData[$try]->{$option}},0); + } else { + push (@{$PlotData[$try]->{$option}}, + 100 * + $ResponseData{$foilid}->[$try]->{$option} / + ($ResponseData{$foilid}->[$try]->{'_total'} + - + $ResponseData{$foilid}->[$try]->{'_correct'} + )); + } } - } + } # End of foreach my $option } - } - } + } # End of foreach my $foilid + } # End of foreach my $concept # # Build a table for the plots my $analysis_html = "\n"; - my $foilkey = &build_option_index($ORdata); - for (my $i=$mintries;$i<=$maxtries;$i++) { - my $count = $ResponseData{'_total'}->[$i]; - if ($count == 0) { - $count = 'no submissions'; - } elsif ($count == 1) { - $count = '1 submission'; - } else { - $count = $count.' submissions'; - } - my $title = 'Attempt '.$i.', '.$count; + my $optionkey = &build_option_index($ORdata); + for (my $try=$mintries;$try<=$maxtries;$try++) { + my $count = $ResponseData{'_total'}->[$try]; + my $title = 'Submission '.$try.' (N='.$count.')'; my @Datasets; - foreach my $option ('_correct',@{$ORdata->{'Options'}}) { - next if (! exists($PlotData[$i]->{$option})); - push(@Datasets,$PlotData[$i]->{$option}); + foreach my $option ('_correct',@{$ORdata->{'_Options'}}) { + next if (! exists($PlotData[$try]->{$option})); + push(@Datasets,$PlotData[$try]->{$option}); } - my $correctgraph = &Apache::loncommon::DrawGraph + # + # Put a blank in the data set between concepts + for (my $set =0;$set<=$#Datasets;$set++) { + my @Data = @{$Datasets[$set]}; + my $idx = 0; + foreach my $concept (@{$Concepts}) { + foreach my $foilid (@{$concept->{'foils'}}) { + $Datasets[$set]->[$idx++]=shift(@Data); + } + if ($concept->{'name'} ne $Concepts->[-1]->{'name'}) { + $Datasets[$set]->[$idx++] = 0; + } + } + } + # + # Set up the labels needed for the bar graph + my @Labels; + my $idx = 1; + foreach my $concept (@{$Concepts}) { + foreach my $foilid (@{$concept->{'foils'}}) { + push(@Labels,$idx++); + } + push(@Labels,''); + } + # + my $correctgraph = &Apache::loncommon::DrawBarGraph ($title,'Foil Number','Percent Correct', - 100,$plotcolors,$Datasets[0]); + 100,$plotcolors,\@Labels,$Datasets[0]); $analysis_html.= ''; - ## - ## + + # + # + next if (! defined($Datasets[0])); for (my $i=0; $i< scalar(@{$Datasets[0]});$i++) { $Datasets[0]->[$i]=0; } - $count = $ResponseData{'_total'}->[$i]-$ResponseData{'_correct'}->[$i]; - if ($count == 0) { - $count = 'no submissions'; - } elsif ($count == 1) { - $count = '1 submission'; - } else { - $count = $count.' submissions'; - } - $title = 'Attempt '.$i.', '.$count; - my $incorrectgraph = &Apache::loncommon::DrawGraph + $count = $ResponseData{'_total'}->[$try] - + $ResponseData{'_correct'}->[$try]; + $title = 'Submission '.$try.' (N='.$count.')'; + my $incorrectgraph = &Apache::loncommon::DrawBarGraph ($title,'Foil Number','% Option Chosen Incorrectly', - 100,$plotcolors,@Datasets); + 100,$plotcolors,\@Labels,@Datasets); $analysis_html.= ''; - $analysis_html.= '\n"; + $analysis_html.= '\n"; } $analysis_html .= "
'.$correctgraph.''.$incorrectgraph.''.$foilkey."
'.$optionkey."
\n"; return $analysis_html; } -sub Tries_Concept_Analysis { +sub OR_Tries_Concept_Analysis { my ($mintries,$maxtries,$Concepts,$respdat,$ORdata) = @_; my %ResponseData = %$respdat; my $analysis_html = "\n"; @@ -465,16 +801,16 @@ sub Tries_Concept_Analysis { $count = $count.' submissions'; } $title = 'Attempt '.$i.', '.$count; - my $graphlink = &Apache::loncommon::DrawGraph + my $graphlink = &Apache::loncommon::DrawBarGraph ($title,'Concept Number','Percent Correct', - 100,$plotcolors,$PlotData[$i]->{'_correct'}); + 100,$plotcolors,undef,$PlotData[$i]->{'_correct'}); $analysis_html.= '\n"; } $analysis_html .= "
'.$graphlink."
\n"; return $analysis_html; } -sub analyze_option_data_by_tries { +sub OR_analyze_by_tries { my ($r,$PerformanceData,$mintries,$maxtries) = @_; my %Trydata; $mintries = 1 if (! defined($mintries) || $mintries < 1); @@ -482,7 +818,7 @@ sub analyze_option_data_by_tries { foreach my $row (@$PerformanceData) { next if (! defined($row)); my $tries = &get_tries_from_row($row); - my %Row = &Process_Row($row); + my %Row = &Process_OR_Row($row); next if (! %Row); while (my ($foilid,$href) = each(%Row)) { if (! ref($href)) { @@ -498,13 +834,11 @@ sub analyze_option_data_by_tries { } ######################################################### +# +# Option Response: Time Analysis +# ######################################################### -## -## Time Analysis -## -######################################################### -######################################################### -sub time_analysis { +sub OR_time_analysis { my ($PerformanceData,$ORdata) = @_; my ($table,$Foils,$Concepts) = &build_foil_index($ORdata); if ((@$Concepts < 2) && ($ENV{'form.AnalyzeAs'} ne 'Foils')) { @@ -546,7 +880,8 @@ sub time_analysis { my $end_index; my $j; while (++$j < scalar(@$PerformanceData)) { - last if (&get_time_from_row($PerformanceData->[$j]) > $starttime); + last if (&get_time_from_row($PerformanceData->[$j]) + > $starttime); } $begin_index = $j; while (++$j < scalar(@$PerformanceData)) { @@ -561,10 +896,10 @@ sub time_analysis { enddateform => $enddateform, }; if ($ENV{'form.AnalyzeAs'} eq 'Foils') { - $table .= &Foil_Time_Analysis($PerformanceData,$ORdata,$Foils, + $table .= &OR_Foil_Time_Analysis($PerformanceData,$ORdata,$Foils, $interval); } else { - $table .= &Concept_Time_Analysis($PerformanceData,$ORdata, + $table .= &OR_Concept_Time_Analysis($PerformanceData,$ORdata, $Concepts,$interval); } } @@ -572,7 +907,7 @@ sub time_analysis { return $table; } -sub Foil_Time_Analysis { +sub OR_Foil_Time_Analysis { my ($PerformanceData,$ORdata,$Foils,$interval) = @_; my $analysis_html; my $foilkey = &build_option_index($ORdata); @@ -584,7 +919,7 @@ sub Foil_Time_Analysis { for (my $j=$begin_index;$j<=$end_index;$j++) { my $row = $PerformanceData->[$j]; next if (! defined($row)); - my %Row = &Process_Row($row); + my %Row = &Process_OR_Row($row); while (my ($foilid,$href) = each(%Row)) { if (! ref($href)) { $TimeData{$foilid} += $href; @@ -606,7 +941,7 @@ sub Foil_Time_Analysis { } my $total_incorrect = $total - $TimeData{$foil}->{'_correct'}; my $optionidx = 1; - foreach my $option (@{$ORdata->{'Options'}}) { + foreach my $option (@{$ORdata->{'_Options'}}) { if ($total_incorrect == 0) { push(@{$Plotdata[$optionidx]},0); } else { @@ -628,12 +963,13 @@ sub Foil_Time_Analysis { } else { $title = $count.' submissions'; } - my $correctplot = &Apache::loncommon::DrawGraph($title, - 'Foil Number', - 'Percent Correct', - 100, - $plotcolors, - $Plotdata[0]); + my $correctplot = &Apache::loncommon::DrawBarGraph($title, + 'Foil Number', + 'Percent Correct', + 100, + $plotcolors, + undef, + $Plotdata[0]); for (my $j=0; $j< scalar(@{$Plotdata[0]});$j++) { $Plotdata[0]->[$j]=0; } @@ -645,11 +981,12 @@ sub Foil_Time_Analysis { } else { $title = $count.' submissions'; } - my $incorrectplot = &Apache::loncommon::DrawGraph($title, + my $incorrectplot = &Apache::loncommon::DrawBarGraph($title, 'Foil Number', 'Incorrect Option Choice', 100, $plotcolors, + undef, @Plotdata); $analysis_html.=''. ''.$correctplot.''. @@ -667,7 +1004,7 @@ sub Foil_Time_Analysis { return $analysis_html; } -sub Concept_Time_Analysis { +sub OR_Concept_Time_Analysis { my ($PerformanceData,$ORdata,$Concepts,$interval) = @_; my $analysis_html; ## @@ -680,7 +1017,7 @@ sub Concept_Time_Analysis { for (my $j=$begin_index;$j<=$end_index;$j++) { my $row = $PerformanceData->[$j]; next if (! defined($row)); - my %Row = &Process_Row($row); + my %Row = &Process_OR_Row($row); while (my ($foilid,$href) = each(%Row)) { if (! ref($href)) { $TimeData{$foilid} += $href; @@ -709,11 +1046,12 @@ sub Concept_Time_Analysis { # # Create the plot my $title = ($end_index - $begin_index).' submissions'; - my $correctplot = &Apache::loncommon::DrawGraph($title, + my $correctplot = &Apache::loncommon::DrawBarGraph($title, 'Concept Number', 'Percent Correct', 100, $plotcolors, + undef, \@Plotdata); $analysis_html.=''. ''.$correctplot.''. @@ -735,10 +1073,9 @@ sub Concept_Time_Analysis { ## ######################################################### ######################################################### - -sub prepare_excel_sheet { +sub OR_excel_sheet { my ($r,$resource,$PerformanceData,$ORdata) = @_; - my $response = '

'.&mt('Excel Spreadsheet Creation').'

'; + my $response = ''; my (undef,$Foils,$Concepts) = &build_foil_index($ORdata); # # Create excel worksheet @@ -756,23 +1093,11 @@ sub prepare_excel_sheet { } # $workbook->set_tempdir('/home/httpd/perl/tmp'); - # - # Define some potentially useful formats - my $format; - $format->{'header'} = $workbook->add_format(bold => 1, - bottom => 1, -# text_wrap => 1, - align => 'center'); - $format->{'bold'} = $workbook->add_format(bold=>1); - $format->{'h1'} = $workbook->add_format(bold=>1, size=>18); - $format->{'h2'} = $workbook->add_format(bold=>1, size=>16); - $format->{'h3'} = $workbook->add_format(bold=>1, size=>14); - $format->{'date'} = $workbook->add_format(num_format=> - 'mmm d yyyy hh:mm AM/PM'); + my $format = &Apache::loncommon::define_excel_formats($workbook); # # Create and populate main worksheets my $problem_data_sheet = $workbook->addworksheet('Problem Data'); - my $student_data_sheet = $workbook->addworksheet('Student Data'); + my $student_data_sheet = &build_student_data_worksheet($workbook,$format); my $response_data_sheet = $workbook->addworksheet('Response Data'); foreach my $sheet ($problem_data_sheet,$student_data_sheet, $response_data_sheet) { @@ -781,33 +1106,31 @@ sub prepare_excel_sheet { } # my $result; - $result = &build_problem_data_worksheet($problem_data_sheet,$format, + $result = &OR_build_problem_data_worksheet($problem_data_sheet,$format, $Concepts,$ORdata); if ($result ne 'okay') { # Do something useful } - $result = &build_student_data_worksheet($student_data_sheet,$format); - if ($result ne 'okay') { - # Do something useful - } - $result = &build_response_data_worksheet($response_data_sheet,$format, + $result = &OR_build_response_data_worksheet($response_data_sheet,$format, $PerformanceData,$Foils, $ORdata); if ($result ne 'okay') { # Do something useful } - $response_data_sheet->activate(); + $response_data_sheet->activate(); # # Close the excel file $workbook->close(); # # Write a link to allow them to download it - $result .= '
'. - 'Your Excel spreadsheet.'."\n"; + $result .= '

'.&mt('Excel Raw Data Output').'

'. + '

'. + &mt('Your Excel spreadsheet.'). + '

'."\n"; return $result; } -sub build_problem_data_worksheet { +sub OR_build_problem_data_worksheet { my ($worksheet,$format,$Concepts,$ORdata) = @_; my $rows_output = 3; my $cols_output = 0; @@ -822,7 +1145,7 @@ sub build_problem_data_worksheet { @Headers = ('Foil Number','FoilName','Foil Text','Correct value'); } $worksheet->write_row($rows_output++,0,\@Headers,$format->{'header'}); - my %Foildata = %{$ORdata->{'Foils'}}; + my %Foildata = %{$ORdata->{'_Foils'}}; my $conceptindex = 1; my $foilindex = 1; foreach my $concept (@$Concepts) { @@ -870,39 +1193,13 @@ sub build_problem_data_worksheet { ## ## Option data output $worksheet->write($rows_output++,0,'Options',$format->{'header'}); - foreach my $string (@{$ORdata->{'Options'}}) { + foreach my $string (@{$ORdata->{'_Options'}}) { $worksheet->write($rows_output++,0,$string); } return 'okay'; } -sub build_student_data_worksheet { - my ($worksheet,$format) = @_; - my $rows_output = 3; - my $cols_output = 0; - $worksheet->write($rows_output++,0,'Student Data',$format->{'h3'}); - my @Headers = ('full name','username','domain','section', - "student\nnumber",'identifier'); - $worksheet->write_row($rows_output++,0,\@Headers,$format->{'header'}); - my @Students = @Apache::lonstatistics::Students; - my $studentrows = &Apache::loncoursedata::get_student_data(\@Students); - my %ids; - foreach my $row (@$studentrows) { - my ($mysqlid,$student) = @$row; - $ids{$student}=$mysqlid; - } - foreach my $student (@Students) { - my $name_domain = $student->{'username'}.':'.$student->{'domain'}; - $worksheet->write_row($rows_output++,0, - [$student->{'fullname'}, - $student->{'username'},$student->{'domain'}, - $student->{'section'},$student->{'id'}, - $ids{$name_domain}]); - } - return; -} - -sub build_response_data_worksheet { +sub OR_build_response_data_worksheet { my ($worksheet,$format,$PerformanceData,$Foils,$ORdata)=@_; my $rows_output = 3; my $cols_output = 0; @@ -931,7 +1228,7 @@ sub build_response_data_worksheet { } $worksheet->write($rows_output,$cols_output++,$student); $worksheet->write($rows_output,$cols_output++, - &calc_serial($time),$format->{'date'}); + &Apache::lonstathelpers::calc_serial($time),$format->{'date'}); $worksheet->write($rows_output,$cols_output++,$award); $worksheet->write($rows_output,$cols_output++,$tries); foreach my $foilid (@$Foils) { @@ -946,189 +1243,149 @@ sub build_response_data_worksheet { return; } - -## -## The following is copied from datecalc1.pl, part of the -## Spreadsheet::WriteExcel CPAN module. -## -## -###################################################################### -# -# Demonstration of writing date/time cells to Excel spreadsheets, -# using UNIX/Perl time as source of date/time. -# -# Copyright 2000, Andrew Benham, adsb@bigfoot.com -# -###################################################################### -# -# UNIX/Perl time is the time since the Epoch (00:00:00 GMT, 1 Jan 1970) -# measured in seconds. -# -# An Excel file can use exactly one of two different date/time systems. -# In these systems, a floating point number represents the number of days -# (and fractional parts of the day) since a start point. The floating point -# number is referred to as a 'serial'. -# The two systems ('1900' and '1904') use different starting points: -# '1900'; '1.00' is 1 Jan 1900 BUT 1900 is erroneously regarded as -# a leap year - see: -# http://support.microsoft.com/support/kb/articles/Q181/3/70.asp -# for the excuse^H^H^H^H^H^Hreason. -# '1904'; '1.00' is 2 Jan 1904. -# -# The '1904' system is the default for Apple Macs. Windows versions of -# Excel have the option to use the '1904' system. -# -# Note that Visual Basic's "DateSerial" function does NOT erroneously -# regard 1900 as a leap year, and thus its serials do not agree with -# the 1900 serials of Excel for dates before 1 Mar 1900. -# -# Note that StarOffice (at least at version 5.2) does NOT erroneously -# regard 1900 as a leap year, and thus its serials do not agree with -# the 1900 serials of Excel for dates before 1 Mar 1900. -# -###################################################################### -# -# Calculation description -# ======================= -# -# 1900 system -# ----------- -# Unix time is '0' at 00:00:00 GMT 1 Jan 1970, i.e. 70 years after 1 Jan 1900. -# Of those 70 years, 17 (1904,08,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68) -# were leap years with an extra day. -# Thus there were 17 + 70*365 days = 25567 days between 1 Jan 1900 and -# 1 Jan 1970. -# In the 1900 system, '1' is 1 Jan 1900, but as 1900 was not a leap year -# 1 Jan 1900 should really be '2', so 1 Jan 1970 is '25569'. -# -# 1904 system -# ----------- -# Unix time is '0' at 00:00:00 GMT 1 Jan 1970, i.e. 66 years after 1 Jan 1904. -# Of those 66 years, 17 (1904,08,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68) -# were leap years with an extra day. -# Thus there were 17 + 66*365 days = 24107 days between 1 Jan 1904 and -# 1 Jan 1970. -# In the 1904 system, 2 Jan 1904 being '1', 1 Jan 1970 is '24107'. -# -###################################################################### -# -# Copyright (c) 2000, Andrew Benham. -# This program is free software. It may be used, redistributed and/or -# modified under the same terms as Perl itself. -# -# Andrew Benham, adsb@bigfoot.com -# London, United Kingdom -# 11 Nov 2000 -# -###################################################################### - -# Use 1900 date system on all platforms other than Apple Mac (for which -# use 1904 date system). -my $DATE_SYSTEM = ($^O eq 'MacOS') ? 1 : 0; - -#----------------------------------------------------------- -# calc_serial() -# -# Called with (up to) 2 parameters. -# 1. Unix timestamp. If omitted, uses current time. -# 2. GMT flag. Set to '1' to return serial in GMT. -# If omitted, returns serial in appropriate timezone. -# -# Returns date/time serial according to $DATE_SYSTEM selected -#----------------------------------------------------------- -sub calc_serial { - my $time = (defined $_[0]) ? $_[0] : time(); - my $gmtflag = (defined $_[1]) ? $_[1] : 0; - - # Divide timestamp by number of seconds in a day. - # This gives a date serial with '0' on 1 Jan 1970. - my $serial = $time / 86400; - - # Adjust the date serial by the offset appropriate to the - # currently selected system (1900/1904). - if ($DATE_SYSTEM == 0) { # use 1900 system - $serial += 25569; - } else { # use 1904 system - $serial += 24107; - } - - unless ($gmtflag) { - # Now have a 'raw' serial with the right offset. But this - # gives a serial in GMT, which is false unless the timezone - # is GMT. We need to adjust the serial by the appropriate - # timezone offset. - # Calculate the appropriate timezone offset by seeing what - # the differences between localtime and gmtime for the given - # time are. - - my @gmtime = gmtime($time); - my @ltime = localtime($time); - - # For the first 7 elements of the two arrays, adjust the - # date serial where the elements differ. - for (0 .. 6) { - my $diff = $ltime[$_] - $gmtime[$_]; - if ($diff) { - $serial += _adjustment($diff,$_); - } - } +sub build_foil_index { + my ($ORdata) = @_; + return if (! exists($ORdata->{'_Foils'})); + my %Foildata = %{$ORdata->{'_Foils'}}; + my @Foils = sort(keys(%Foildata)); + my %Concepts; + foreach my $foilid (@Foils) { + push(@{$Concepts{$Foildata{$foilid}->{'_Concept'}}}, + $foilid); + } + undef(@Foils); + # Having gathered the concept information in a hash, we now translate it + # into an array because we need to be consistent about order. + # Also put the foils in order, too. + my $sortfunction = sub { + my %Numbers = (one => 1, + two => 2, + three => 3, + four => 4, + five => 5, + six => 6, + seven => 7, + eight => 8, + nine => 9, + ten => 10,); + my $a1 = lc($a); + my $b1 = lc($b); + if (exists($Numbers{$a1})) { + $a1 = $Numbers{$a1}; } - - # Perpetuate the error that 1900 was a leap year by decrementing - # the serial if we're using the 1900 system and the date is prior to - # 1 Mar 1900. This has the effect of making serial value '60' - # 29 Feb 1900. - - # This fix only has any effect if UNIX/Perl time on the platform - # can represent 1900. Many can't. - - unless ($DATE_SYSTEM) { - $serial-- if ($serial < 61); # '61' is 1 Mar 1900 - } - return $serial; -} - -sub _adjustment { - # Based on the difference in the localtime/gmtime array elements - # number, return the adjustment required to the serial. - - # We only look at some elements of the localtime/gmtime arrays: - # seconds unlikely to be different as all known timezones - # have an offset of integral multiples of 15 minutes, - # but it's easy to do. - # minutes will be different for timezone offsets which are - # not an exact number of hours. - # hours very likely to be different. - # weekday will differ when localtime/gmtime difference - # straddles midnight. - # - # Assume that difference between localtime and gmtime is less than - # 5 days, then don't have to do maths for day of month, month number, - # year number, etc... - - my ($delta,$element) = @_; - my $adjust = 0; - - if ($element == 0) { # Seconds - $adjust = $delta/86400; # 60 * 60 * 24 - } elsif ($element == 1) { # Minutes - $adjust = $delta/1440; # 60 * 24 - } elsif ($element == 2) { # Hours - $adjust = $delta/24; # 24 - } elsif ($element == 6) { # Day of week number - # Catch difference straddling Sat/Sun in either direction - $delta += 7 if ($delta < -4); - $delta -= 7 if ($delta > 4); - - $adjust = $delta; + if (exists($Numbers{$b1})) { + $b1 = $Numbers{$b1}; } - return $adjust; + if (($a1 =~/^\d+$/) && ($b1 =~/^\d+$/)) { + return $a1 <=> $b1; + } else { + return $a1 cmp $b1; + } + }; + my @Concepts; + foreach my $concept (sort $sortfunction (keys(%Concepts))) { + if (! defined($Concepts{$concept})) { + $Concepts{$concept}=[]; +# next; + } + push(@Concepts,{ name => $concept, + foils => [@{$Concepts{$concept}}]}); + push(@Foils,(@{$Concepts{$concept}})); + } + # + # Build up the table of row labels. + my $table = ''."\n"; + if (@Concepts > 1) { + $table .= ''. + ''. + ''. + ''. + ''. + ''. + ''. + "\n"; + } else { + $table .= ''. + ''. + ''. + ''. + ''. + "\n"; + } + my $conceptindex = 1; + my $foilindex = 1; + foreach my $concept (@Concepts) { + my @FoilsInConcept = @{$concept->{'foils'}}; + my $firstfoil = shift(@FoilsInConcept); + if (@Concepts > 1) { + $table .= ''. + ''. + ''. + ''. + ''. + ''. + ''. + "\n"; + } else { + $table .= ''. + ''. + ''. + ''. + ''. + "\n"; + } + foreach my $foilid (@FoilsInConcept) { + if (@Concepts > 1) { + $table .= ''. + ''. + ''. + ''. + ''. + ''. + ''. + "\n"; + } else { + $table .= ''. + ''. + ''. + ''. + ''. + "\n"; + } + } continue { + $foilindex++; + } + } continue { + $conceptindex++; + } + $table .= "
'.&mt('Concept Number').''.&mt('Concept').''.&mt('Foil Number').''.&mt('Foil Name').''.&mt('Foil Text').''.&mt('Correct Value').'
'.&mt('Foil Number').''.&mt('Foil Name').''.&mt('Foil Text').''.&mt('Correct Value').'
'.$conceptindex.''.&HTML::Entities::encode($concept->{'name'}).''.$foilindex++.''.&HTML::Entities::encode($Foildata{$firstfoil}->{'name'}).''.$Foildata{$firstfoil}->{'text'}.''.&HTML::Entities::encode($Foildata{$firstfoil}->{'value'}).'
'.$foilindex++.''.&HTML::Entities::encode($Foildata{$firstfoil}->{'name'}).''.$Foildata{$firstfoil}->{'text'}.''.&HTML::Entities::encode($Foildata{$firstfoil}->{'value'}).'
'.$foilindex.''.&HTML::Entities::encode($Foildata{$foilid}->{'name'}).''.$Foildata{$foilid}->{'text'}.''.&HTML::Entities::encode($Foildata{$foilid}->{'value'}).'
'.$foilindex.''.&HTML::Entities::encode($Foildata{$foilid}->{'name'}).''.$Foildata{$foilid}->{'text'}.''.&HTML::Entities::encode($Foildata{$foilid}->{'value'}).'
\n"; + # + # Build option index with color stuff + return ($table,\@Foils,\@Concepts); +} + +sub build_option_index { + my ($ORdata)= @_; + my $table = "\n"; + my $optionindex = 0; + my @Rows; + foreach my $option (&mt('correct option chosen'),@{$ORdata->{'_Options'}}) { + push (@Rows, + ''. + ''. + ''. + "\n"); + } + shift(@Rows); # Throw away 'correct option chosen' color + $table .= join('',reverse(@Rows)); + $table .= "
'. + (' 'x4).''.&HTML::Entities::encode($option).'
\n"; } ######################################################### ######################################################### ## -## Interface +## Generic Interface Routines ## ######################################################### ######################################################### @@ -1141,6 +1398,8 @@ sub CreateInterface { ## ## Build the menu my $Str = ''; + $Str .= &Apache::lonhtmlcommon::breadcrumbs + (undef,'Detailed Problem Analysis'); $Str .= ''."\n"; $Str .= ''; $Str .= ''; @@ -1175,6 +1434,8 @@ sub CreateInterface { { # These braces are here to organize the code, not scope it. { $Str .= ''.&mt('Analyze Over '); + $Str .= &Apache::loncommon::help_open_topic + ('Analysis_Analyze_Over'); $Str .='
'; + $Str .= ''; + $Str .= '
'; } { $Str .= ''.&mt('Analyze as '); + $Str .= &Apache::loncommon::help_open_topic + ('Analysis_Analyze_as'); $Str .='\n"; - } - } - } - } - if ($seq_str ne '') { - $Str .= ''. - "\n".$seq_str; - } - } - $Str .= "
'.&mt('Sections').'
'. - ''. - ''. - ''.$res->{'title'}.' '; - if ($partdata->{'option'} > 1) { - $seq_str .= &mt('response').' '.$respid; - } - $seq_str .= "
 '.$seq->{'title'}.'
\n"; - return $Str; -} - ######################################################### ######################################################### ## -## Misc functions +## Misc Option Response functions ## ######################################################### ######################################################### -sub get_problem_symb { - my $problemstring = shift(); - my ($symb,$partid,$resid) = ($problemstring=~ /^(.*):([^:]*):([^:]*)$/); - return ($symb,$partid,$resid); -} - -sub get_resource_from_symb { - my ($symb) = @_; - foreach my $seq (&Apache::lonstatistics::Sequences_with_Assess()) { - foreach my $res (@{$seq->{'contents'}}) { - if ($res->{'symb'} eq $symb) { - return $res; - } - } - } - return undef; -} - sub get_time_from_row { my ($row) = @_; if (ref($row)) { - return $row->[3]; + return $row->[&Apache::loncoursedata::RD_timestamp()]; } return undef; } @@ -1307,15 +1511,30 @@ sub get_time_from_row { sub get_tries_from_row { my ($row) = @_; if (ref($row)) { - return $row->[5]; + return $row->[&Apache::loncoursedata::RD_tries()]; } return undef; } -sub Process_Row { +sub hashify_attempt { + my ($row) = @_; + my %attempt; + $attempt{'tries'} = $row->[&Apache::loncoursedata::RD_tries()]; + $attempt{'submission'} = $row->[&Apache::loncoursedata::RD_submission()]; + $attempt{'award'} = $row->[&Apache::loncoursedata::RD_awarddetail()]; + $attempt{'timestamp'} = $row->[&Apache::loncoursedata::RD_timestamp()]; + return %attempt; +} + +sub Process_OR_Row { my ($row) = @_; my %RowData; - my ($student_id,$award,$grading,$submission,$time,$tries) = @$row; + my $student_id = $row->[&Apache::loncoursedata::RD_student_id()]; + my $award = $row->[&Apache::loncoursedata::RD_awarddetail()]; + my $grading = $row->[&Apache::loncoursedata::RD_response_eval()]; + my $submission = $row->[&Apache::loncoursedata::RD_submission()]; + my $time = $row->[&Apache::loncoursedata::RD_timestamp()]; + my $tries = $row->[&Apache::loncoursedata::RD_tries()]; return undef if ($award eq 'MISSING_ANSWER'); if ($award =~ /(APPROX_ANS|EXACT_ANS)/) { $RowData{'_correct'} = 1; @@ -1325,6 +1544,7 @@ sub Process_Row { my @Foilsubs = split('&',$submission); for (my $j=0;$j<=$#Foilgrades;$j++) { my ($foilid,$correct) = split('=',$Foilgrades[$j]); + $foilid = &Apache::lonnet::unescape($foilid); my (undef,$submission) = split('=',$Foilsubs[$j]); if ($correct) { $RowData{$foilid}->{'_correct'}++; @@ -1337,50 +1557,6 @@ sub Process_Row { return %RowData; } -## -## get problem data and put it into a useful data structure. -## note: we must force each foil and option to not begin or end with -## spaces as they are stored without such data. -## -sub get_problem_data { - my ($url) = @_; - my $Answ=&Apache::lonnet::ssi($url,('grade_target' => 'analyze')); - (my $garbage,$Answ)=split(/_HASH_REF__/,$Answ,2); - my %Answer; - %Answer=&Apache::lonnet::str2hash($Answ); - my %Partdata; - foreach my $part (@{$Answer{'parts'}}) { - while (my($key,$value) = each(%Answer)) { - next if ($key !~ /^$part/); - $key =~ s/^$part\.//; - if (ref($value) eq 'ARRAY') { - if ($key eq 'options') { - $Partdata{$part}->{'Options'}=$value; - } elsif ($key eq 'concepts') { - $Partdata{$part}->{'Concepts'}=$value; - } elsif ($key =~ /^concept\.(.*)$/) { - my $concept = $1; - foreach my $foil (@$value) { - $Partdata{$part}->{'Foils'}->{$foil}->{'Concept'}= - $concept; - } - } - } else { - if ($key=~ /^foil\.text\.(.*)$/) { - my $foil = $1; - $Partdata{$part}->{'Foils'}->{$foil}->{'name'}=$foil; - $value =~ s/(\s*$|^\s*)//g; - $Partdata{$part}->{'Foils'}->{$foil}->{'text'}=$value; - } elsif ($key =~ /^foil\.value\.(.*)$/) { - my $foil = $1; - $Partdata{$part}->{'Foils'}->{$foil}->{'value'}=$value; - } - } - } - } - return %Partdata; -} - 1; __END__