Annotation of loncom/interface/statistics/lonstathelpers.pm, revision 1.28
1.1 matthew 1: # The LearningOnline Network with CAPA
2: #
1.28 ! matthew 3: # $Id: lonstathelpers.pm,v 1.27 2004/09/30 13:44:07 matthew Exp $
1.1 matthew 4: #
5: # Copyright Michigan State University Board of Trustees
6: #
7: # This file is part of the LearningOnline Network with CAPA (LON-CAPA).
8: #
9: # LON-CAPA is free software; you can redistribute it and/or modify
10: # it under the terms of the GNU General Public License as published by
11: # the Free Software Foundation; either version 2 of the License, or
12: # (at your option) any later version.
13: #
14: # LON-CAPA is distributed in the hope that it will be useful,
15: # but WITHOUT ANY WARRANTY; without even the implied warranty of
16: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: # GNU General Public License for more details.
18: #
19: # You should have received a copy of the GNU General Public License
20: # along with LON-CAPA; if not, write to the Free Software
21: # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22: #
23: # /home/httpd/html/adm/gpl.txt
24: #
25: # http://www.lon-capa.org/
26: #
27: ####################################################
28: ####################################################
29:
30: =pod
31:
32: =head1 NAME
33:
34: Apache::lonstathelpers - helper routines used by statistics
35:
36: =head1 SYNOPSIS
37:
38: This module provides a place to consolidate much of the statistics
39: routines that are needed across multiple statistics functions.
40:
41: =head1 OVERVIEW
42:
43: =over 4
44:
45: =cut
46:
47: ####################################################
48: ####################################################
49: package Apache::lonstathelpers;
50:
51: use strict;
52: use Apache::lonnet();
53: use Apache::loncommon();
54: use Apache::lonhtmlcommon();
55: use Apache::loncoursedata();
56: use Apache::lonstatistics;
57: use Apache::lonlocal;
58: use HTML::Entities();
59: use Time::Local();
60: use Spreadsheet::WriteExcel();
1.8 matthew 61: use GDBM_File;
62: use Storable qw(freeze thaw);
1.1 matthew 63:
64: ####################################################
65: ####################################################
66:
67: =pod
68:
69: =item &render_resource($resource)
70:
71: Input: a resource generated from
72: &Apache::loncoursedata::get_sequence_assessment_data().
73:
74: Retunrs: a scalar containing html for a rendering of the problem
75: within a table.
76:
77: =cut
78:
79: ####################################################
80: ####################################################
81: sub render_resource {
82: my ($resource) = @_;
83: ##
84: ## Render the problem
85: my $base;
86: ($base,undef) = ($resource->{'src'} =~ m|(.*/)[^/]*$|);
87: $base = "http://".$ENV{'SERVER_NAME'}.$base;
88: my $rendered_problem =
89: &Apache::lonnet::ssi_body($resource->{'src'});
90: $rendered_problem =~ s/<\s*form\s*/<nop /g;
91: $rendered_problem =~ s|(<\s*/form\s*>)|<\/nop>|g;
92: return '<table bgcolor="ffffff"><tr><td>'.
93: '<base href="'.$base.'" />'.
94: $rendered_problem.
95: '</td></tr></table>';
96: }
1.2 matthew 97:
98: ####################################################
99: ####################################################
100:
101: =pod
102:
103: =item &ProblemSelector($AcceptedResponseTypes)
104:
105: Input: scalar containing regular expression which matches response
106: types to show. '.' will yield all, '(option|radiobutton)' will match
107: all option response and radiobutton problems.
108:
109: Returns: A string containing html for a table which lists the sequences
110: and their contents. A radiobutton is provided for each problem.
1.14 matthew 111: Skips 'survey' problems.
1.2 matthew 112:
113: =cut
114:
115: ####################################################
116: ####################################################
117: sub ProblemSelector {
118: my ($AcceptedResponseTypes) = @_;
119: my $Str;
120: $Str = "\n<table>\n";
1.27 matthew 121: my $rb_count =0;
1.12 matthew 122: foreach my $seq (&Apache::lonstatistics::Sequences_with_Assess('all')) {
1.2 matthew 123: next if ($seq->{'num_assess'}<1);
124: my $seq_str = '';
125: foreach my $res (@{$seq->{'contents'}}) {
126: next if ($res->{'type'} ne 'assessment');
127: foreach my $part (@{$res->{'parts'}}) {
128: my $partdata = $res->{'partdata'}->{$part};
129: for (my $i=0;$i<scalar(@{$partdata->{'ResponseTypes'}});$i++){
130: my $respid = $partdata->{'ResponseIds'}->[$i];
131: my $resptype = $partdata->{'ResponseTypes'}->[$i];
132: if ($resptype =~ m/$AcceptedResponseTypes/) {
133: my $value = &make_target_id({symb=>$res->{'symb'},
134: part=>$part,
135: respid=>$respid,
136: resptype=>$resptype});
137: my $checked = '';
138: if ($ENV{'form.problemchoice'} eq $value) {
139: $checked = 'checked ';
140: }
141: my $title = $res->{'title'};
142: if (! defined($title) || $title eq '') {
143: ($title) = ($res->{'src'} =~ m:/([^/]*)$:);
144: }
1.27 matthew 145: $seq_str .= '<tr>'.
146: qq{<td><input type="radio" id="$rb_count" name="problemchoice" value="$value" $checked /></td>}.
147: '<td><label for="'.$rb_count.'">'.$resptype.'</label></td>'.
148: '<td><label for="'.$rb_count.'">'.$title.'</label>';
1.5 matthew 149: if (scalar(@{$partdata->{'ResponseIds'}}) > 1) {
1.2 matthew 150: $seq_str .= &mt('response').' '.$respid;
151: }
1.27 matthew 152: $seq_str .= (' 'x2).
153: qq{<a target="preview" href="$res->{'src'}">view</a>};
1.2 matthew 154: $seq_str .= "</td></tr>\n";
1.27 matthew 155: $rb_count++;
1.2 matthew 156: }
157: }
158: }
159: }
160: if ($seq_str ne '') {
161: $Str .= '<tr><td> </td><td colspan="2"><b>'.$seq->{'title'}.'</b></td>'.
162: "</tr>\n".$seq_str;
163: }
164: }
165: $Str .= "</table>\n";
166: return $Str;
167: }
168:
169: ####################################################
170: ####################################################
171:
172: =pod
173:
1.24 matthew 174: =item &MultipleProblemSelector($navmap,$selected,$inputname)
1.21 matthew 175:
176: Generate HTML with checkboxes for problem selection.
177:
178: Input:
179:
180: $navmap: a navmap object. If undef, navmaps will be called to create a
181: new object.
182:
183: $selected: Scalar, Array, or hash reference of currently selected items.
184:
185: $inputname: The name of the form elements to use for the checkboxs.
186:
187: Returns: A string containing html for a table which lists the sequences
188: and their contents. A checkbox is provided for each problem.
189:
190: =cut
191:
192: ####################################################
193: ####################################################
194: sub MultipleProblemSelector {
1.23 matthew 195: my ($navmap,$inputname,$formname)=@_;
1.21 matthew 196: my $cid = $ENV{'request.course.id'};
197: my $Str;
198: # Massage the input as needed.
199: if (! defined($navmap)) {
200: $navmap = Apache::lonnavmaps::navmap->new();
201: if (! defined($navmap)) {
202: $Str .=
203: '<h1>'.&mt('Error: cannot process course structure').'</h1>';
204: return $Str;
205: }
206: }
207: my $selected = {map { ($_,1) } (&get_selected_symbs($inputname))};
208: # Header
209: $Str .= <<"END";
1.25 matthew 210: <script language="JavaScript" type="text/javascript">
211: function checkall(value,seqid) {
1.21 matthew 212: for (i=0; i<document.forms.$formname.elements.length; i++) {
213: ele = document.forms.$formname.elements[i];
214: if (ele.name == '$inputname') {
1.25 matthew 215: if (seqid != null) {
216: itemid = document.forms.$formname.elements[i].id;
217: thing = itemid.split(':');
218: if (thing[0] == seqid) {
219: document.forms.$formname.elements[i].checked=value;
220: }
221: } else {
222: document.forms.$formname.elements[i].checked=value;
223: }
1.21 matthew 224: }
225: }
226: }
227: </script>
228: END
229: $Str .=
230: '<a href="javascript:checkall(true)">'.&mt('Select All').'</a>'.
231: (' 'x4).
232: '<a href="javascript:checkall(false)">'.&mt('Unselect All').'</a>';
233: $Str .= $/.'<table>'.$/;
234: my $iterator = $navmap->getIterator(undef, undef, undef, 1);
235: my $sequence_string;
1.25 matthew 236: my $seq_id = 0;
1.21 matthew 237: my @Accumulator = (&new_accumulator($ENV{'course.'.$cid.'.description'},
238: '',
239: '',
1.25 matthew 240: $seq_id++,
1.21 matthew 241: $inputname));
242: my @Sequence_Data;
243: while (my $curRes = $iterator->next()) {
244: if ($curRes == $iterator->END_MAP) {
245: if (ref($Accumulator[-1]) eq 'CODE') {
1.24 matthew 246: my $old_accumulator = pop(@Accumulator);
247: push(@Sequence_Data,&{$old_accumulator}());
1.21 matthew 248: }
249: } elsif ($curRes == $iterator->BEGIN_MAP) {
250: # Not much to do here.
251: }
252: next if (! ref($curRes));
253: if ($curRes->is_map) {
1.24 matthew 254: push(@Accumulator,&new_accumulator($curRes->compTitle,
1.21 matthew 255: $curRes->src,
256: $curRes->symb,
1.25 matthew 257: $seq_id++,
1.21 matthew 258: $inputname));
259: } elsif ($curRes->is_problem) {
260: if (@Accumulator && $Accumulator[-1] ne '') {
261: &{$Accumulator[-1]}($curRes,
262: exists($selected->{$curRes->symb}));
263: }
264: }
265: }
266: my $course_seq = pop(@Sequence_Data);
267: foreach my $seq ($course_seq,@Sequence_Data) {
268: #my $seq = pop(@Sequence_Data);
269: next if (! defined($seq) || ref($seq) ne 'HASH');
270: $Str.= '<tr><td colspan="2">'.
1.25 matthew 271: '<b>'.$seq->{'title'}.'</b>'.(' 'x2).
272: '<a href="javascript:checkall(true,'.$seq->{'id'}.')">'.
273: &mt('Select').'</a>'.(' 'x2).
274: '<a href="javascript:checkall(false,'.$seq->{'id'}.')">'.
275: &mt('Unselect').'</a>'.(' 'x2).
1.21 matthew 276: '</td></tr>'.$/;
277: $Str.= $seq->{'html'};
278: }
279: $Str .= '</table>'.$/;
280: return $Str;
281: }
282:
283: sub get_title {
284: my ($title,$src) = @_;
285: if ($title eq '') {
286: ($title) = ($src =~ m|/([^/]+)$|);
287: } else {
288: $title =~ s/\:/:/g;
289: }
290: return $title;
291: }
292:
293: sub new_accumulator {
1.25 matthew 294: my ($title,$src,$symb,$seq_id,$inputname) = @_;
1.21 matthew 295: my $target;
1.25 matthew 296: my $item_id=0;
1.21 matthew 297: return
298: sub {
299: if (@_) {
300: my ($res,$checked) = @_;
1.23 matthew 301: $target.='<tr><td><label>'.
1.21 matthew 302: '<input type="checkbox" name="'.$inputname.'" ';
303: if ($checked) {
304: $target .= 'checked ';
305: }
1.25 matthew 306: $target .= 'id="'.$seq_id.':'.$item_id++.'" ';
1.21 matthew 307: $target.=
308: 'value="'.&Apache::lonnet::escape($res->symb).'" />'.
1.26 matthew 309: ' '.$res->compTitle.'</label>'.
310: (' 'x2).'<a target="preview" '.
311: 'href="'.$res->src.'">view</a>'.
312: '</td></tr>'.$/;
1.21 matthew 313: } else {
314: if (defined($target)) {
315: return { title => $title,
316: symb => $symb,
317: src => $src,
1.25 matthew 318: id => $seq_id,
1.21 matthew 319: html => $target, };
320: }
321: return undef;
322: }
323: };
324: }
325:
326: sub get_selected_symbs {
327: my ($inputfield) = @_;
328: my $field = 'form.'.$inputfield;
329: my @Symbs;
330: if (exists($ENV{$field})) {
331: if (! ref($ENV{$field})) {
332: @Symbs = (&Apache::lonnet::unescape($ENV{$field}));
333: } else {
334: @Symbs = (map {&Apache::lonnet::unescape($_);} @{$ENV{$field}});
335: }
336: }
337: return @Symbs;
338: }
339:
340: ####################################################
341: ####################################################
342:
343: =pod
344:
1.2 matthew 345: =item &make_target_id($target)
346:
347: Inputs: Hash ref with the following entries:
348: $target->{'symb'}, $target->{'part'}, $target->{'respid'},
349: $target->{'resptype'}.
350:
351: Returns: A string, suitable for a form parameter, which uniquely identifies
352: the problem, part, and response to do statistical analysis on.
353:
354: Used by Apache::lonstathelpers::ProblemSelector().
355:
356: =cut
357:
358: ####################################################
359: ####################################################
360: sub make_target_id {
361: my ($target) = @_;
362: my $id = &Apache::lonnet::escape($target->{'symb'}).':'.
363: &Apache::lonnet::escape($target->{'part'}).':'.
364: &Apache::lonnet::escape($target->{'respid'}).':'.
365: &Apache::lonnet::escape($target->{'resptype'});
366: return $id;
367: }
368:
369: ####################################################
370: ####################################################
371:
372: =pod
373:
374: =item &get_target_from_id($id)
375:
376: Inputs: $id, a scalar string from Apache::lonstathelpers::make_target_id().
377:
378: Returns: A hash reference, $target, containing the following keys:
379: $target->{'symb'}, $target->{'part'}, $target->{'respid'},
380: $target->{'resptype'}.
381:
382: =cut
383:
384: ####################################################
385: ####################################################
386: sub get_target_from_id {
387: my ($id) = @_;
1.21 matthew 388: if (! ref($id)) {
389: my ($symb,$part,$respid,$resptype) = split(':',$id);
390: return ({ symb => &Apache::lonnet::unescape($symb),
391: part => &Apache::lonnet::unescape($part),
392: respid => &Apache::lonnet::unescape($respid),
393: resptype => &Apache::lonnet::unescape($resptype)});
394: } elsif (ref($id) eq 'ARRAY') {
395: my @Return;
396: foreach my $selected (@$id) {
397: my ($symb,$part,$respid,$resptype) = split(':',$selected);
398: push(@Return,{ symb => &Apache::lonnet::unescape($symb),
399: part => &Apache::lonnet::unescape($part),
400: respid => &Apache::lonnet::unescape($respid),
401: resptype => &Apache::lonnet::unescape($resptype)});
402: }
403: return \@Return;
404: }
1.2 matthew 405: }
406:
407: ####################################################
408: ####################################################
409:
410: =pod
411:
1.13 matthew 412: =item &get_prev_curr_next($target,$AcceptableResponseTypes,$granularity)
1.2 matthew 413:
414: Determine the problem parts or responses preceeding and following the
415: current resource.
416:
417: Inputs: $target (see &Apache::lonstathelpers::get_target_from_id())
418: $AcceptableResponseTypes, regular expression matching acceptable
419: response types,
1.13 matthew 420: $granularity, either 'part', 'response', or 'part_survey'
1.2 matthew 421:
422: Returns: three hash references, $prev, $curr, $next, which refer to the
423: preceeding, current, or following problem parts or responses, depending
424: on the value of $granularity. Values of undef indicate there is no
425: previous or next part/response. A value of undef for all three indicates
426: there was no match found to the current part/resource.
427:
428: The hash references contain the following keys:
429: symb, part, resource
430:
431: If $granularity eq 'response', the following ADDITIONAL keys will be present:
432: respid, resptype
433:
434: =cut
435:
436: ####################################################
437: ####################################################
438: sub get_prev_curr_next {
439: my ($target,$AcceptableResponseTypes,$granularity) = @_;
440: #
441: # Build an array with the data we need to search through
442: my @Resource;
1.12 matthew 443: foreach my $seq (&Apache::lonstatistics::Sequences_with_Assess('all')) {
1.2 matthew 444: foreach my $res (@{$seq->{'contents'}}) {
445: next if ($res->{'type'} ne 'assessment');
446: foreach my $part (@{$res->{'parts'}}) {
447: my $partdata = $res->{'partdata'}->{$part};
1.20 matthew 448: if ($partdata->{'Survey'} && ($granularity eq 'part_survey')){
449: push (@Resource,
450: { symb => $res->{symb},
451: part => $part,
452: resource => $res,
453: } );
1.13 matthew 454: } elsif ($granularity eq 'part') {
1.2 matthew 455: push (@Resource,
456: { symb => $res->{symb},
457: part => $part,
458: resource => $res,
459: } );
460: } elsif ($granularity eq 'response') {
461: for (my $i=0;
462: $i<scalar(@{$partdata->{'ResponseTypes'}});
463: $i++){
464: my $respid = $partdata->{'ResponseIds'}->[$i];
465: my $resptype = $partdata->{'ResponseTypes'}->[$i];
466: next if ($resptype !~ m/$AcceptableResponseTypes/);
467: push (@Resource,
468: { symb => $res->{symb},
469: part => $part,
470: respid => $partdata->{'ResponseIds'}->[$i],
471: resource => $res,
472: resptype => $resptype
473: } );
474: }
475: }
476: }
477: }
478: }
479: #
480: # Get the index of the current situation
481: my $curr_idx;
482: for ($curr_idx=0;$curr_idx<$#Resource;$curr_idx++) {
483: my $curr_item = $Resource[$curr_idx];
1.13 matthew 484: if ($granularity eq 'part' || $granularity eq 'part_survey') {
1.2 matthew 485: if ($curr_item->{'symb'} eq $target->{'symb'} &&
486: $curr_item->{'part'} eq $target->{'part'}) {
487: last;
488: }
489: } elsif ($granularity eq 'response') {
490: if ($curr_item->{'symb'} eq $target->{'symb'} &&
491: $curr_item->{'part'} eq $target->{'part'} &&
492: $curr_item->{'respid'} eq $target->{'respid'} &&
493: $curr_item->{'resptype'} eq $target->{'resptype'}) {
494: last;
495: }
496: }
497: }
498: my $curr_item = $Resource[$curr_idx];
1.13 matthew 499: if ($granularity eq 'part' || $granularity eq 'part_survey') {
1.2 matthew 500: if ($curr_item->{'symb'} ne $target->{'symb'} ||
501: $curr_item->{'part'} ne $target->{'part'}) {
502: # bogus symb - return nothing
503: return (undef,undef,undef);
504: }
505: } elsif ($granularity eq 'response') {
506: if ($curr_item->{'symb'} ne $target->{'symb'} ||
507: $curr_item->{'part'} ne $target->{'part'} ||
508: $curr_item->{'respid'} ne $target->{'respid'} ||
509: $curr_item->{'resptype'} ne $target->{'resptype'}){
510: # bogus symb - return nothing
511: return (undef,undef,undef);
512: }
513: }
514: #
515: # Now just pick up the data we need
516: my ($prev,$curr,$next);
517: if ($curr_idx == 0) {
518: $prev = undef;
519: $curr = $Resource[$curr_idx ];
520: $next = $Resource[$curr_idx+1];
521: } elsif ($curr_idx == $#Resource) {
522: $prev = $Resource[$curr_idx-1];
523: $curr = $Resource[$curr_idx ];
524: $next = undef;
525: } else {
526: $prev = $Resource[$curr_idx-1];
527: $curr = $Resource[$curr_idx ];
528: $next = $Resource[$curr_idx+1];
529: }
530: return ($prev,$curr,$next);
1.4 matthew 531: }
532:
1.9 matthew 533:
534: #####################################################
535: #####################################################
536:
537: =pod
538:
539: =item GetStudentAnswers($r,$problem,$Students)
540:
541: Determines the correct answer for a set of students on a given problem.
542: The students answers are stored in the student hashes pointed to by the
543: array @$Students under the key 'answer'.
544:
545: Inputs: $r
546: $problem: hash reference containing the keys 'resource', 'part', and 'respid'.
547: $Students: reference to array containing student hashes (need 'username',
548: 'domain').
549:
550: Returns: nothing
551:
552: =cut
553:
554: #####################################################
555: #####################################################
556: sub GetStudentAnswers {
1.12 matthew 557: my ($r,$problem,$Students,$formname,$inputname) = @_;
558: my $status_type;
559: if (defined($formname)) {
560: $status_type = 'inline';
561: } else {
562: $status_type = 'popup';
563: }
1.9 matthew 564: my $c = $r->connection();
565: my %Answers;
566: my ($resource,$partid,$respid) = ($problem->{'resource'},
567: $problem->{'part'},
568: $problem->{'respid'});
569: # Read in the cache (if it exists) before we start timing things.
570: &Apache::lonstathelpers::ensure_proper_cache($resource->{'symb'});
571: # Open progress window
572: my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin
573: ($r,'Student Answer Compilation Status',
1.12 matthew 574: 'Student Answer Compilation Progress', scalar(@$Students),
575: $status_type,undef,$formname,$inputname);
1.9 matthew 576: $r->rflush();
577: foreach my $student (@$Students) {
578: last if ($c->aborted());
579: my $sname = $student->{'username'};
580: my $sdom = $student->{'domain'};
581: my $answer = &Apache::lonstathelpers::analyze_problem_as_student
582: ($resource,$sname,$sdom,$partid,$respid);
583: &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,
584: &mt('last student'));
585: $student->{'answer'} = $answer;
586: }
587: &Apache::lonstathelpers::write_answer_cache();
588: return if ($c->aborted());
589: $r->rflush();
590: # close progress window
591: &Apache::lonhtmlcommon::Close_PrgWin($r,\%prog_state);
592: return;
593: }
1.4 matthew 594:
595: #####################################################
596: #####################################################
597:
598: =pod
599:
600: =item analyze_problem_as_student
601:
602: Analyzes a homework problem for a student and returns the correct answer
603: for the student. Attempts to put together an answer for problem types
604: that do not natively support it.
605:
606: Inputs: $resource: a resource object
607: $sname, $sdom, $partid, $respid
608:
609: Returns: $answer
610:
1.6 matthew 611: If $partid and $respid are specified, $answer is simply a scalar containing
612: the correct answer for the response.
613:
614: If $partid or $respid are undefined, $answer will be a hash reference with
615: keys $partid.'.'.$respid.'.answer'.
616:
1.4 matthew 617: =cut
618:
619: #####################################################
620: #####################################################
621: sub analyze_problem_as_student {
622: my ($resource,$sname,$sdom,$partid,$respid) = @_;
1.22 matthew 623: if (ref($resource) ne 'HASH') {
624: my $res = $resource;
625: $resource = { 'src' => $res->src,
626: 'symb' => $res->symb,
627: 'parts' => $res->parts };
628: foreach my $part (@{$resource->{'parts'}}) {
629: $resource->{'partdata'}->{$part}->{'ResponseIds'}=
630: [$res->responseIds($part)];
631: }
632: }
1.4 matthew 633: my $returnvalue;
634: my $url = $resource->{'src'};
635: my $symb = $resource->{'symb'};
1.8 matthew 636: my $answer = &get_from_answer_cache($sname,$sdom,$symb,$partid,$respid);
637: if (defined($answer)) {
638: return($answer);
639: }
1.4 matthew 640: my $courseid = $ENV{'request.course.id'};
641: my $Answ=&Apache::lonnet::ssi($url,('grade_target' => 'analyze',
642: 'grade_domain' => $sdom,
643: 'grade_username' => $sname,
644: 'grade_symb' => $symb,
645: 'grade_courseid' => $courseid));
646: (my $garbage,$Answ)=split(/_HASH_REF__/,$Answ,2);
647: my %Answer=&Apache::lonnet::str2hash($Answ);
1.6 matthew 648: #
1.8 matthew 649: undef($answer);
650: foreach my $partid (@{$resource->{'parts'}}) {
1.6 matthew 651: my $partdata = $resource->{'partdata'}->{$partid};
652: foreach my $respid (@{$partdata->{'ResponseIds'}}) {
653: my $prefix = $partid.'.'.$respid;
654: my $key = $prefix.'.answer';
1.8 matthew 655: $answer->{$partid}->{$respid} = &get_answer($prefix,$key,%Answer);
1.6 matthew 656: }
1.8 matthew 657: }
658: &store_answer($sname,$sdom,$symb,undef,undef,$answer);
659: if (! defined($partid)) {
660: $returnvalue = $answer;
661: } elsif (! defined($respid)) {
662: $returnvalue = $answer->{$partid};
1.6 matthew 663: } else {
1.8 matthew 664: $returnvalue = $answer->{$partid}->{$respid};
1.6 matthew 665: }
666: return $returnvalue;
667: }
668:
669: sub get_answer {
670: my ($prefix,$key,%Answer) = @_;
671: my $returnvalue;
1.4 matthew 672: if (exists($Answer{$key})) {
673: my $student_answer = $Answer{$key}->[0];
674: if (! defined($student_answer)) {
675: $student_answer = $Answer{$key}->[1];
676: }
677: $returnvalue = $student_answer;
678: } else {
679: if (exists($Answer{$prefix.'.shown'})) {
680: # The response has foils
681: my %values;
682: while (my ($k,$v) = each(%Answer)) {
683: next if ($k !~ /^$prefix\.foil\.(value|area)\.(.*)$/);
684: my $foilname = $2;
685: $values{$foilname}=$v;
686: }
687: foreach my $foil (@{$Answer{$prefix.'.shown'}}) {
688: if (ref($values{$foil}) eq 'ARRAY') {
1.10 albertel 689: $returnvalue.=&HTML::Entities::encode($foil,'<>&"').'='.
690: join(',',map {&HTML::Entities::encode($_,'<>&"')} @{$values{$foil}}).'&';
1.4 matthew 691: } else {
1.10 albertel 692: $returnvalue.=&HTML::Entities::encode($foil,'<>&"').'='.
693: &HTML::Entities::encode($values{$foil},'<>&"').'&';
1.4 matthew 694: }
695: }
696: $returnvalue =~ s/ /\%20/g;
697: chop ($returnvalue);
698: }
699: }
700: return $returnvalue;
701: }
1.8 matthew 702:
703:
704: #####################################################
705: #####################################################
706:
707: =pod
708:
709: =item Caching routines
710:
711: =over 4
712:
713: =item &load_answer_cache($symb)
714:
715: Loads the cache for the given symb into memory from disk.
716: Requires the cache filename be set.
717: Only should be called by &ensure_proper_cache.
718:
719: =cut
720:
721: #####################################################
722: #####################################################
723: {
724: my $cache_filename = undef;
725: my $current_symb = undef;
726: my %cache;
727:
728: sub load_answer_cache {
729: my ($symb) = @_;
730: return if (! defined($cache_filename));
731: if (! defined($current_symb) || $current_symb ne $symb) {
732: undef(%cache);
733: my $storedstring;
734: my %cache_db;
735: if (tie(%cache_db,'GDBM_File',$cache_filename,&GDBM_READER(),0640)) {
736: $storedstring = $cache_db{&Apache::lonnet::escape($symb)};
737: untie(%cache_db);
738: }
739: if (defined($storedstring)) {
740: %cache = %{thaw($storedstring)};
741: }
742: }
743: return;
744: }
745:
746: #####################################################
747: #####################################################
748:
749: =pod
750:
751: =item &get_from_answer_cache($sname,$sdom,$symb,$partid,$respid)
752:
753: Returns the appropriate data from the cache, or undef if no data exists.
754: If $respid is undefined, a hash ref containing the answers for the given
755: $partid is returned. If $partid is undefined, a hash ref containing answers
756: for all of the parts is returned.
757:
758: =cut
759:
760: #####################################################
761: #####################################################
762: sub get_from_answer_cache {
763: my ($sname,$sdom,$symb,$partid,$respid) = @_;
764: &ensure_proper_cache($symb);
765: my $returnvalue;
766: if (exists($cache{$sname.':'.$sdom}) &&
767: ref($cache{$sname.':'.$sdom}) eq 'HASH') {
768: if (defined($partid) &&
769: exists($cache{$sname.':'.$sdom}->{$partid})) {
770: if (defined($respid) &&
771: exists($cache{$sname.':'.$sdom}->{$partid}->{$respid})) {
772: $returnvalue = $cache{$sname.':'.$sdom}->{$partid}->{$respid};
773: } else {
774: $returnvalue = $cache{$sname.':'.$sdom}->{$partid};
775: }
776: } else {
777: $returnvalue = $cache{$sname.':'.$sdom};
778: }
779: } else {
780: $returnvalue = undef;
781: }
782: return $returnvalue;
783: }
784:
785: #####################################################
786: #####################################################
787:
788: =pod
789:
790: =item &write_answer_cache($symb)
791:
792: Writes the in memory cache to disk so that it can be read in with
793: &load_answer_cache($symb).
794:
795: =cut
796:
797: #####################################################
798: #####################################################
799: sub write_answer_cache {
800: return if (! defined($current_symb) || ! defined($cache_filename));
801: my %cache_db;
802: my $key = &Apache::lonnet::escape($current_symb);
803: if (tie(%cache_db,'GDBM_File',$cache_filename,&GDBM_WRCREAT(),0640)) {
804: my $storestring = freeze(\%cache);
805: $cache_db{$key}=$storestring;
806: $cache_db{$key.'.time'}=time;
807: untie(%cache_db);
808: }
809: undef(%cache);
810: undef($current_symb);
811: undef($cache_filename);
812: return;
813: }
814:
815: #####################################################
816: #####################################################
817:
818: =pod
819:
820: =item &ensure_proper_cache($symb)
821:
822: Called to make sure we have the proper cache set up. This is called
823: prior to every answer lookup.
824:
825: =cut
826:
827: #####################################################
828: #####################################################
829: sub ensure_proper_cache {
830: my ($symb) = @_;
831: my $cid = $ENV{'request.course.id'};
832: my $new_filename = '/home/httpd/perl/tmp/'.
1.18 matthew 833: 'problemanalysis_'.$cid.'_answer_cache.db';
1.8 matthew 834: if (! defined($cache_filename) ||
835: $cache_filename ne $new_filename ||
836: ! defined($current_symb) ||
837: $current_symb ne $symb) {
838: $cache_filename = $new_filename;
839: # Notice: $current_symb is not set to $symb until after the cache is
840: # loaded. This is what tells &load_answer_cache to load in a new
841: # symb cache.
842: &load_answer_cache($symb);
843: $current_symb = $symb;
844: }
845: }
846:
847: #####################################################
848: #####################################################
849:
850: =pod
851:
852: =item &store_answer($sname,$sdom,$symb,$partid,$respid,$dataset)
853:
854: Stores the answer data in the in memory cache.
855:
856: =cut
857:
858: #####################################################
859: #####################################################
860: sub store_answer {
861: my ($sname,$sdom,$symb,$partid,$respid,$dataset) = @_;
862: return if ($symb ne $current_symb);
863: if (defined($partid)) {
864: if (defined($respid)) {
865: $cache{$sname.':'.$sdom}->{$partid}->{$respid} = $dataset;
866: } else {
867: $cache{$sname.':'.$sdom}->{$partid} = $dataset;
868: }
869: } else {
870: $cache{$sname.':'.$sdom}=$dataset;
871: }
872: return;
873: }
874:
875: }
876: #####################################################
877: #####################################################
878:
879: =pod
880:
881: =back
882:
883: =cut
884:
885: #####################################################
886: #####################################################
1.4 matthew 887:
888: ##
889: ## The following is copied from datecalc1.pl, part of the
890: ## Spreadsheet::WriteExcel CPAN module.
891: ##
892: ##
893: ######################################################################
894: #
895: # Demonstration of writing date/time cells to Excel spreadsheets,
896: # using UNIX/Perl time as source of date/time.
897: #
898: # Copyright 2000, Andrew Benham, adsb@bigfoot.com
899: #
900: ######################################################################
901: #
902: # UNIX/Perl time is the time since the Epoch (00:00:00 GMT, 1 Jan 1970)
903: # measured in seconds.
904: #
905: # An Excel file can use exactly one of two different date/time systems.
906: # In these systems, a floating point number represents the number of days
907: # (and fractional parts of the day) since a start point. The floating point
908: # number is referred to as a 'serial'.
909: # The two systems ('1900' and '1904') use different starting points:
910: # '1900'; '1.00' is 1 Jan 1900 BUT 1900 is erroneously regarded as
911: # a leap year - see:
912: # http://support.microsoft.com/support/kb/articles/Q181/3/70.asp
913: # for the excuse^H^H^H^H^H^Hreason.
914: # '1904'; '1.00' is 2 Jan 1904.
915: #
916: # The '1904' system is the default for Apple Macs. Windows versions of
917: # Excel have the option to use the '1904' system.
918: #
919: # Note that Visual Basic's "DateSerial" function does NOT erroneously
920: # regard 1900 as a leap year, and thus its serials do not agree with
921: # the 1900 serials of Excel for dates before 1 Mar 1900.
922: #
923: # Note that StarOffice (at least at version 5.2) does NOT erroneously
924: # regard 1900 as a leap year, and thus its serials do not agree with
925: # the 1900 serials of Excel for dates before 1 Mar 1900.
926: #
927: ######################################################################
928: #
929: # Calculation description
930: # =======================
931: #
932: # 1900 system
933: # -----------
934: # Unix time is '0' at 00:00:00 GMT 1 Jan 1970, i.e. 70 years after 1 Jan 1900.
935: # Of those 70 years, 17 (1904,08,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68)
936: # were leap years with an extra day.
937: # Thus there were 17 + 70*365 days = 25567 days between 1 Jan 1900 and
938: # 1 Jan 1970.
939: # In the 1900 system, '1' is 1 Jan 1900, but as 1900 was not a leap year
940: # 1 Jan 1900 should really be '2', so 1 Jan 1970 is '25569'.
941: #
942: # 1904 system
943: # -----------
944: # Unix time is '0' at 00:00:00 GMT 1 Jan 1970, i.e. 66 years after 1 Jan 1904.
945: # Of those 66 years, 17 (1904,08,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68)
946: # were leap years with an extra day.
947: # Thus there were 17 + 66*365 days = 24107 days between 1 Jan 1904 and
948: # 1 Jan 1970.
949: # In the 1904 system, 2 Jan 1904 being '1', 1 Jan 1970 is '24107'.
950: #
951: ######################################################################
952: #
953: # Copyright (c) 2000, Andrew Benham.
954: # This program is free software. It may be used, redistributed and/or
955: # modified under the same terms as Perl itself.
956: #
957: # Andrew Benham, adsb@bigfoot.com
958: # London, United Kingdom
959: # 11 Nov 2000
960: #
961: ######################################################################
962: #-----------------------------------------------------------
963: # calc_serial()
964: #
965: # Called with (up to) 2 parameters.
966: # 1. Unix timestamp. If omitted, uses current time.
967: # 2. GMT flag. Set to '1' to return serial in GMT.
968: # If omitted, returns serial in appropriate timezone.
969: #
970: # Returns date/time serial according to $DATE_SYSTEM selected
971: #-----------------------------------------------------------
972: sub calc_serial {
973: # Use 1900 date system on all platforms other than Apple Mac (for which
974: # use 1904 date system).
975: my $DATE_SYSTEM = ($^O eq 'MacOS') ? 1 : 0;
976: my $time = (defined $_[0]) ? $_[0] : time();
977: my $gmtflag = (defined $_[1]) ? $_[1] : 0;
978: #
979: # Divide timestamp by number of seconds in a day.
980: # This gives a date serial with '0' on 1 Jan 1970.
981: my $serial = $time / 86400;
982: #
983: # Adjust the date serial by the offset appropriate to the
984: # currently selected system (1900/1904).
985: if ($DATE_SYSTEM == 0) { # use 1900 system
986: $serial += 25569;
987: } else { # use 1904 system
988: $serial += 24107;
989: }
990: #
991: unless ($gmtflag) {
992: # Now have a 'raw' serial with the right offset. But this
993: # gives a serial in GMT, which is false unless the timezone
994: # is GMT. We need to adjust the serial by the appropriate
995: # timezone offset.
996: # Calculate the appropriate timezone offset by seeing what
997: # the differences between localtime and gmtime for the given
998: # time are.
999: #
1000: my @gmtime = gmtime($time);
1001: my @ltime = localtime($time);
1002: #
1003: # For the first 7 elements of the two arrays, adjust the
1004: # date serial where the elements differ.
1005: for (0 .. 6) {
1006: my $diff = $ltime[$_] - $gmtime[$_];
1007: if ($diff) {
1008: $serial += _adjustment($diff,$_);
1009: }
1010: }
1011: }
1012: #
1013: # Perpetuate the error that 1900 was a leap year by decrementing
1014: # the serial if we're using the 1900 system and the date is prior to
1015: # 1 Mar 1900. This has the effect of making serial value '60'
1016: # 29 Feb 1900.
1017: #
1018: # This fix only has any effect if UNIX/Perl time on the platform
1019: # can represent 1900. Many can't.
1020: #
1021: unless ($DATE_SYSTEM) {
1022: $serial-- if ($serial < 61); # '61' is 1 Mar 1900
1023: }
1024: return $serial;
1025: }
1026:
1027: sub _adjustment {
1028: # Based on the difference in the localtime/gmtime array elements
1029: # number, return the adjustment required to the serial.
1030: #
1031: # We only look at some elements of the localtime/gmtime arrays:
1032: # seconds unlikely to be different as all known timezones
1033: # have an offset of integral multiples of 15 minutes,
1034: # but it's easy to do.
1035: # minutes will be different for timezone offsets which are
1036: # not an exact number of hours.
1037: # hours very likely to be different.
1038: # weekday will differ when localtime/gmtime difference
1039: # straddles midnight.
1040: #
1041: # Assume that difference between localtime and gmtime is less than
1042: # 5 days, then don't have to do maths for day of month, month number,
1043: # year number, etc...
1044: #
1045: my ($delta,$element) = @_;
1046: my $adjust = 0;
1047: #
1048: if ($element == 0) { # Seconds
1049: $adjust = $delta/86400; # 60 * 60 * 24
1050: } elsif ($element == 1) { # Minutes
1051: $adjust = $delta/1440; # 60 * 24
1052: } elsif ($element == 2) { # Hours
1053: $adjust = $delta/24; # 24
1054: } elsif ($element == 6) { # Day of week number
1055: # Catch difference straddling Sat/Sun in either direction
1056: $delta += 7 if ($delta < -4);
1057: $delta -= 7 if ($delta > 4);
1058: #
1059: $adjust = $delta;
1060: }
1061: return $adjust;
1062: }
1063:
1064: ###########################################################
1065: ###########################################################
1066:
1067: =pod
1068:
1069: =item get_problem_data
1070:
1071: Returns a data structure describing the problem.
1072:
1073: Inputs: $url
1074:
1075: Returns: %Partdata
1076:
1077: =cut
1078:
1079: ## note: we must force each foil and option to not begin or end with
1080: ## spaces as they are stored without such data.
1081: ##
1082: ###########################################################
1083: ###########################################################
1084: sub get_problem_data {
1085: my ($url) = @_;
1086: my $Answ=&Apache::lonnet::ssi($url,('grade_target' => 'analyze'));
1087: (my $garbage,$Answ)=split(/_HASH_REF__/,$Answ,2);
1088: my %Answer;
1089: %Answer=&Apache::lonnet::str2hash($Answ);
1090: my %Partdata;
1091: foreach my $part (@{$Answer{'parts'}}) {
1092: while (my($key,$value) = each(%Answer)) {
1093: #
1094: # Logging code:
1.7 matthew 1095: if (0) {
1.4 matthew 1096: &Apache::lonnet::logthis($part.' got key "'.$key.'"');
1097: if (ref($value) eq 'ARRAY') {
1098: &Apache::lonnet::logthis(' @'.join(',',@$value));
1099: } else {
1100: &Apache::lonnet::logthis(' '.$value);
1101: }
1102: }
1103: # End of logging code
1104: next if ($key !~ /^$part/);
1105: $key =~ s/^$part\.//;
1106: if (ref($value) eq 'ARRAY') {
1107: if ($key eq 'options') {
1108: $Partdata{$part}->{'_Options'}=$value;
1109: } elsif ($key eq 'concepts') {
1110: $Partdata{$part}->{'_Concepts'}=$value;
1.28 ! matthew 1111: } elsif ($key eq 'items') {
! 1112: $Partdata{$part}->{'_Items'}=$value;
1.4 matthew 1113: } elsif ($key =~ /^concept\.(.*)$/) {
1114: my $concept = $1;
1115: foreach my $foil (@$value) {
1116: $Partdata{$part}->{'_Foils'}->{$foil}->{'_Concept'}=
1117: $concept;
1118: }
1.28 ! matthew 1119: } elsif ($key =~ /^(incorrect|answer|ans_low|ans_high|str_type)$/) {
1.4 matthew 1120: $Partdata{$part}->{$key}=$value;
1121: }
1122: } else {
1123: if ($key=~ /^foil\.text\.(.*)$/) {
1124: my $foil = $1;
1125: $Partdata{$part}->{'_Foils'}->{$foil}->{'name'}=$foil;
1126: $value =~ s/(\s*$|^\s*)//g;
1127: $Partdata{$part}->{'_Foils'}->{$foil}->{'text'}=$value;
1128: } elsif ($key =~ /^foil\.value\.(.*)$/) {
1129: my $foil = $1;
1130: $Partdata{$part}->{'_Foils'}->{$foil}->{'value'}=$value;
1.28 ! matthew 1131: } elsif ($key eq 'answercomputed') {
! 1132: $Partdata{$part}->{'answercomputed'} = $value;
1.4 matthew 1133: }
1134: }
1135: }
1136: }
1.28 ! matthew 1137: # Further debugging code
! 1138: if (0) {
! 1139: &Apache::lonnet::logthis('lonstathelpers::get_problem_data');
! 1140: &log_hash_ref(\%Partdata);
! 1141: }
1.4 matthew 1142: return %Partdata;
1.5 matthew 1143: }
1144:
1.28 ! matthew 1145: sub log_array_ref {
! 1146: my ($arrayref,$prefix) = @_;
! 1147: return if (ref($arrayref) ne 'ARRAY');
! 1148: if (! defined($prefix)) { $prefix = ''; };
! 1149: foreach my $v (@$arrayref) {
! 1150: if (ref($v) eq 'ARRAY') {
! 1151: &log_array_ref($v,$prefix.' ');
! 1152: } elsif (ref($v) eq 'HASH') {
! 1153: &log_hash_ref($v,$prefix.' ');
! 1154: } else {
! 1155: &Apache::lonnet::logthis($prefix.'"'.$v.'"');
! 1156: }
! 1157: }
! 1158: }
! 1159:
! 1160: sub log_hash_ref {
! 1161: my ($hashref,$prefix) = @_;
! 1162: return if (ref($hashref) ne 'HASH');
! 1163: if (! defined($prefix)) { $prefix = ''; };
! 1164: while (my ($k,$v) = each(%$hashref)) {
! 1165: if (ref($v) eq 'ARRAY') {
! 1166: &Apache::lonnet::logthis($prefix.'"'.$k.'" = array');
! 1167: &log_array_ref($v,$prefix.' ');
! 1168: } elsif (ref($v) eq 'HASH') {
! 1169: &Apache::lonnet::logthis($prefix.'"'.$k.'" = hash');
! 1170: &log_hash_ref($v,$prefix.' ');
! 1171: } else {
! 1172: &Apache::lonnet::logthis($prefix.'"'.$k.'" => "'.$v.'"');
! 1173: }
! 1174: }
! 1175: }
1.5 matthew 1176: ####################################################
1177: ####################################################
1178:
1179: =pod
1180:
1181: =item &limit_by_time()
1182:
1183: =cut
1184:
1185: ####################################################
1186: ####################################################
1187: sub limit_by_time_form {
1188: my $Starttime_form = '';
1189: my $starttime = &Apache::lonhtmlcommon::get_date_from_form
1190: ('limitby_startdate');
1191: my $endtime = &Apache::lonhtmlcommon::get_date_from_form
1192: ('limitby_enddate');
1193: if (! defined($endtime)) {
1194: $endtime = time;
1195: }
1196: if (! defined($starttime)) {
1197: $starttime = $endtime - 60*60*24*7;
1198: }
1199: my $state;
1200: if (&limit_by_time()) {
1201: $state = '';
1202: } else {
1203: $state = 'disabled';
1204: }
1205: my $startdateform = &Apache::lonhtmlcommon::date_setter
1206: ('Statistics','limitby_startdate',$starttime,undef,undef,$state);
1207: my $enddateform = &Apache::lonhtmlcommon::date_setter
1208: ('Statistics','limitby_enddate',$endtime,undef,undef,$state);
1209: my $Str;
1210: $Str .= '<script language="Javascript" >';
1211: $Str .= 'function toggle_limitby_activity(state) {';
1212: $Str .= ' if (state) {';
1213: $Str .= ' limitby_startdate_enable();';
1214: $Str .= ' limitby_enddate_enable();';
1215: $Str .= ' } else {';
1216: $Str .= ' limitby_startdate_disable();';
1217: $Str .= ' limitby_enddate_disable();';
1218: $Str .= ' }';
1219: $Str .= '}';
1220: $Str .= '</script>';
1221: $Str .= '<fieldset>';
1222: my $timecheckbox = '<input type="checkbox" name="limit_by_time" ';
1223: if (&limit_by_time()) {
1224: $timecheckbox .= ' checked ';
1225: }
1226: $timecheckbox .= 'OnChange="javascript:toggle_limitby_activity(this.checked);" ';
1227: $timecheckbox .= ' />';
1228: $Str .= '<legend>'.&mt('[_1] Limit by time',$timecheckbox).'</legend>';
1229: $Str .= &mt('Start Time: [_1]',$startdateform).'<br />';
1230: $Str .= &mt(' End Time: [_1]',$enddateform).'<br />';
1231: $Str .= '</fieldset>';
1232: return $Str;
1233: }
1234:
1235: sub limit_by_time {
1236: if (exists($ENV{'form.limit_by_time'}) &&
1237: $ENV{'form.limit_by_time'} ne '' ) {
1238: return 1;
1239: } else {
1240: return 0;
1241: }
1242: }
1243:
1244: sub get_time_limits {
1245: my $starttime = &Apache::lonhtmlcommon::get_date_from_form
1246: ('limitby_startdate');
1247: my $endtime = &Apache::lonhtmlcommon::get_date_from_form
1248: ('limitby_enddate');
1249: return ($starttime,$endtime);
1.11 matthew 1250: }
1251:
1252:
1253:
1254: ####################################################
1255: ####################################################
1256:
1257: =pod
1258:
1259: =item sections_description
1260:
1261: Inputs: @Sections, an array of sections
1262:
1263: Returns: A text description of the sections selected.
1264:
1265: =cut
1266:
1267: ####################################################
1268: ####################################################
1269: sub sections_description {
1270: my @Sections = @_;
1271: my $sectionstring = '';
1272: if (scalar(@Sections) > 1) {
1273: if (scalar(@Sections) > 2) {
1274: my $last = pop(@Sections);
1275: $sectionstring = "Sections ".join(', ',@Sections).', and '.$last;
1276: } else {
1277: $sectionstring = "Sections ".join(' and ',@Sections);
1278: }
1279: } else {
1280: if ($Sections[0] eq 'all') {
1281: $sectionstring = "All sections";
1282: } else {
1283: $sectionstring = "Section ".$Sections[0];
1284: }
1285: }
1286: return $sectionstring;
1.2 matthew 1287: }
1288:
1289: ####################################################
1290: ####################################################
1291:
1292: =pod
1293:
1.12 matthew 1294: =item &manage_caches
1295:
1296: Inputs: $r, apache request object
1297:
1298: Returns: An array of scalars containing html for buttons.
1299:
1300: =cut
1301:
1302: ####################################################
1303: ####################################################
1304: sub manage_caches {
1.23 matthew 1305: my ($r,$formname,$inputname,$update_message) = @_;
1.12 matthew 1306: &Apache::loncoursedata::clear_internal_caches();
1.16 matthew 1307: my $sectionkey =
1308: join(',',
1309: map {
1310: &Apache::lonnet::escape($_);
1311: } sort(@Apache::lonstatistics::SelectedSections)
1312: );
1313: my $statuskey = $Apache::lonstatistics::enrollment_status;
1.12 matthew 1314: if (exists($ENV{'form.ClearCache'}) ||
1.16 matthew 1315: exists($ENV{'form.updatecaches'}) ||
1316: (exists($ENV{'form.firstrun'}) && $ENV{'form.firstrun'} ne 'no') ||
1317: (exists($ENV{'form.prevsection'}) &&
1318: $ENV{'form.prevsection'} ne $sectionkey) ||
1319: (exists($ENV{'form.prevenrollstatus'}) &&
1320: $ENV{'form.prevenrollstatus'} ne $statuskey)
1321: ) {
1.23 matthew 1322: if (defined($update_message)) {
1323: $r->print($update_message);
1324: }
1.12 matthew 1325: &Apache::lonstatistics::Gather_Full_Student_Data($r,$formname,
1326: $inputname);
1.23 matthew 1327:
1.12 matthew 1328: }
1329: #
1.16 matthew 1330: my @Buttons =
1331: ('<input type="submit" name="ClearCache" '.
1332: 'value="'.&mt('Clear Caches').'" />',
1333: '<input type="submit" name="updatecaches" '.
1.17 matthew 1334: 'value="'.&mt('Update Caches').'" />'.
1335: &Apache::loncommon::help_open_topic('Statistics_Cache'),
1.16 matthew 1336: '<input type="hidden" name="prevsection" value="'.$sectionkey.'" />',
1337: '<input type="hidden" name="prevenrollstatus" value="'.$statuskey.'" />'
1338: );
1339: #
1.12 matthew 1340: if (! exists($ENV{'form.firstrun'})) {
1341: $r->print('<input type="hidden" name="firstrun" value="yes" />');
1342: } else {
1343: $r->print('<input type="hidden" name="firstrun" value="no" />');
1344: }
1345: #
1346: return @Buttons;
1347: }
1348:
1349:
1350:
1351:
1352: ####################################################
1353: ####################################################
1354:
1355: =pod
1356:
1.2 matthew 1357: =back
1358:
1359: =cut
1360:
1361: ####################################################
1362: ####################################################
1.1 matthew 1363:
1364: 1;
1365:
1366: __END__
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to lonstathelpers.pm CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / loncom / interface / statistics