Annotation of loncom/interface/statistics/lonstathelpers.pm, revision 1.31
1.1 matthew 1: # The LearningOnline Network with CAPA
2: #
1.31 ! matthew 3: # $Id: lonstathelpers.pm,v 1.30 2004/11/08 15:14:52 matthew Exp $
1.1 matthew 4: #
5: # Copyright Michigan State University Board of Trustees
6: #
7: # This file is part of the LearningOnline Network with CAPA (LON-CAPA).
8: #
9: # LON-CAPA is free software; you can redistribute it and/or modify
10: # it under the terms of the GNU General Public License as published by
11: # the Free Software Foundation; either version 2 of the License, or
12: # (at your option) any later version.
13: #
14: # LON-CAPA is distributed in the hope that it will be useful,
15: # but WITHOUT ANY WARRANTY; without even the implied warranty of
16: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: # GNU General Public License for more details.
18: #
19: # You should have received a copy of the GNU General Public License
20: # along with LON-CAPA; if not, write to the Free Software
21: # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22: #
23: # /home/httpd/html/adm/gpl.txt
24: #
25: # http://www.lon-capa.org/
26: #
27: ####################################################
28: ####################################################
29:
30: =pod
31:
32: =head1 NAME
33:
34: Apache::lonstathelpers - helper routines used by statistics
35:
36: =head1 SYNOPSIS
37:
38: This module provides a place to consolidate much of the statistics
39: routines that are needed across multiple statistics functions.
40:
41: =head1 OVERVIEW
42:
43: =over 4
44:
45: =cut
46:
47: ####################################################
48: ####################################################
49: package Apache::lonstathelpers;
50:
51: use strict;
52: use Apache::lonnet();
53: use Apache::loncommon();
54: use Apache::lonhtmlcommon();
55: use Apache::loncoursedata();
56: use Apache::lonstatistics;
57: use Apache::lonlocal;
58: use HTML::Entities();
59: use Time::Local();
60: use Spreadsheet::WriteExcel();
1.8 matthew 61: use GDBM_File;
62: use Storable qw(freeze thaw);
1.1 matthew 63:
64: ####################################################
65: ####################################################
66:
67: =pod
68:
69: =item &render_resource($resource)
70:
71: Input: a resource generated from
72: &Apache::loncoursedata::get_sequence_assessment_data().
73:
74: Retunrs: a scalar containing html for a rendering of the problem
75: within a table.
76:
77: =cut
78:
79: ####################################################
80: ####################################################
81: sub render_resource {
82: my ($resource) = @_;
83: ##
84: ## Render the problem
85: my $base;
86: ($base,undef) = ($resource->{'src'} =~ m|(.*/)[^/]*$|);
87: $base = "http://".$ENV{'SERVER_NAME'}.$base;
88: my $rendered_problem =
89: &Apache::lonnet::ssi_body($resource->{'src'});
90: $rendered_problem =~ s/<\s*form\s*/<nop /g;
91: $rendered_problem =~ s|(<\s*/form\s*>)|<\/nop>|g;
92: return '<table bgcolor="ffffff"><tr><td>'.
93: '<base href="'.$base.'" />'.
94: $rendered_problem.
95: '</td></tr></table>';
96: }
1.2 matthew 97:
98: ####################################################
99: ####################################################
100:
101: =pod
102:
103: =item &ProblemSelector($AcceptedResponseTypes)
104:
105: Input: scalar containing regular expression which matches response
106: types to show. '.' will yield all, '(option|radiobutton)' will match
107: all option response and radiobutton problems.
108:
109: Returns: A string containing html for a table which lists the sequences
110: and their contents. A radiobutton is provided for each problem.
1.14 matthew 111: Skips 'survey' problems.
1.2 matthew 112:
113: =cut
114:
115: ####################################################
116: ####################################################
117: sub ProblemSelector {
118: my ($AcceptedResponseTypes) = @_;
119: my $Str;
120: $Str = "\n<table>\n";
1.27 matthew 121: my $rb_count =0;
1.12 matthew 122: foreach my $seq (&Apache::lonstatistics::Sequences_with_Assess('all')) {
1.2 matthew 123: next if ($seq->{'num_assess'}<1);
124: my $seq_str = '';
125: foreach my $res (@{$seq->{'contents'}}) {
126: next if ($res->{'type'} ne 'assessment');
127: foreach my $part (@{$res->{'parts'}}) {
128: my $partdata = $res->{'partdata'}->{$part};
129: for (my $i=0;$i<scalar(@{$partdata->{'ResponseTypes'}});$i++){
130: my $respid = $partdata->{'ResponseIds'}->[$i];
131: my $resptype = $partdata->{'ResponseTypes'}->[$i];
132: if ($resptype =~ m/$AcceptedResponseTypes/) {
133: my $value = &make_target_id({symb=>$res->{'symb'},
134: part=>$part,
135: respid=>$respid,
136: resptype=>$resptype});
137: my $checked = '';
138: if ($ENV{'form.problemchoice'} eq $value) {
139: $checked = 'checked ';
140: }
141: my $title = $res->{'title'};
142: if (! defined($title) || $title eq '') {
143: ($title) = ($res->{'src'} =~ m:/([^/]*)$:);
144: }
1.27 matthew 145: $seq_str .= '<tr>'.
146: qq{<td><input type="radio" id="$rb_count" name="problemchoice" value="$value" $checked /></td>}.
147: '<td><label for="'.$rb_count.'">'.$resptype.'</label></td>'.
148: '<td><label for="'.$rb_count.'">'.$title.'</label>';
1.5 matthew 149: if (scalar(@{$partdata->{'ResponseIds'}}) > 1) {
1.2 matthew 150: $seq_str .= &mt('response').' '.$respid;
151: }
1.27 matthew 152: $seq_str .= (' 'x2).
153: qq{<a target="preview" href="$res->{'src'}">view</a>};
1.2 matthew 154: $seq_str .= "</td></tr>\n";
1.27 matthew 155: $rb_count++;
1.2 matthew 156: }
157: }
158: }
159: }
160: if ($seq_str ne '') {
161: $Str .= '<tr><td> </td><td colspan="2"><b>'.$seq->{'title'}.'</b></td>'.
162: "</tr>\n".$seq_str;
163: }
164: }
165: $Str .= "</table>\n";
166: return $Str;
167: }
168:
169: ####################################################
170: ####################################################
171:
172: =pod
173:
1.24 matthew 174: =item &MultipleProblemSelector($navmap,$selected,$inputname)
1.21 matthew 175:
176: Generate HTML with checkboxes for problem selection.
177:
178: Input:
179:
180: $navmap: a navmap object. If undef, navmaps will be called to create a
181: new object.
182:
183: $selected: Scalar, Array, or hash reference of currently selected items.
184:
185: $inputname: The name of the form elements to use for the checkboxs.
186:
187: Returns: A string containing html for a table which lists the sequences
188: and their contents. A checkbox is provided for each problem.
189:
190: =cut
191:
192: ####################################################
193: ####################################################
194: sub MultipleProblemSelector {
1.23 matthew 195: my ($navmap,$inputname,$formname)=@_;
1.21 matthew 196: my $cid = $ENV{'request.course.id'};
197: my $Str;
198: # Massage the input as needed.
199: if (! defined($navmap)) {
200: $navmap = Apache::lonnavmaps::navmap->new();
201: if (! defined($navmap)) {
202: $Str .=
203: '<h1>'.&mt('Error: cannot process course structure').'</h1>';
204: return $Str;
205: }
206: }
207: my $selected = {map { ($_,1) } (&get_selected_symbs($inputname))};
208: # Header
209: $Str .= <<"END";
1.25 matthew 210: <script language="JavaScript" type="text/javascript">
211: function checkall(value,seqid) {
1.21 matthew 212: for (i=0; i<document.forms.$formname.elements.length; i++) {
213: ele = document.forms.$formname.elements[i];
214: if (ele.name == '$inputname') {
1.25 matthew 215: if (seqid != null) {
216: itemid = document.forms.$formname.elements[i].id;
217: thing = itemid.split(':');
218: if (thing[0] == seqid) {
219: document.forms.$formname.elements[i].checked=value;
220: }
221: } else {
222: document.forms.$formname.elements[i].checked=value;
223: }
1.21 matthew 224: }
225: }
226: }
227: </script>
228: END
229: $Str .=
230: '<a href="javascript:checkall(true)">'.&mt('Select All').'</a>'.
231: (' 'x4).
232: '<a href="javascript:checkall(false)">'.&mt('Unselect All').'</a>';
233: $Str .= $/.'<table>'.$/;
234: my $iterator = $navmap->getIterator(undef, undef, undef, 1);
235: my $sequence_string;
1.25 matthew 236: my $seq_id = 0;
1.21 matthew 237: my @Accumulator = (&new_accumulator($ENV{'course.'.$cid.'.description'},
238: '',
239: '',
1.25 matthew 240: $seq_id++,
1.21 matthew 241: $inputname));
242: my @Sequence_Data;
243: while (my $curRes = $iterator->next()) {
244: if ($curRes == $iterator->END_MAP) {
245: if (ref($Accumulator[-1]) eq 'CODE') {
1.24 matthew 246: my $old_accumulator = pop(@Accumulator);
247: push(@Sequence_Data,&{$old_accumulator}());
1.21 matthew 248: }
249: } elsif ($curRes == $iterator->BEGIN_MAP) {
250: # Not much to do here.
251: }
252: next if (! ref($curRes));
253: if ($curRes->is_map) {
1.24 matthew 254: push(@Accumulator,&new_accumulator($curRes->compTitle,
1.21 matthew 255: $curRes->src,
256: $curRes->symb,
1.25 matthew 257: $seq_id++,
1.21 matthew 258: $inputname));
259: } elsif ($curRes->is_problem) {
260: if (@Accumulator && $Accumulator[-1] ne '') {
261: &{$Accumulator[-1]}($curRes,
262: exists($selected->{$curRes->symb}));
263: }
264: }
265: }
266: my $course_seq = pop(@Sequence_Data);
267: foreach my $seq ($course_seq,@Sequence_Data) {
268: #my $seq = pop(@Sequence_Data);
269: next if (! defined($seq) || ref($seq) ne 'HASH');
270: $Str.= '<tr><td colspan="2">'.
1.25 matthew 271: '<b>'.$seq->{'title'}.'</b>'.(' 'x2).
272: '<a href="javascript:checkall(true,'.$seq->{'id'}.')">'.
273: &mt('Select').'</a>'.(' 'x2).
274: '<a href="javascript:checkall(false,'.$seq->{'id'}.')">'.
275: &mt('Unselect').'</a>'.(' 'x2).
1.21 matthew 276: '</td></tr>'.$/;
277: $Str.= $seq->{'html'};
278: }
279: $Str .= '</table>'.$/;
280: return $Str;
281: }
282:
283: sub get_title {
284: my ($title,$src) = @_;
285: if ($title eq '') {
286: ($title) = ($src =~ m|/([^/]+)$|);
287: } else {
288: $title =~ s/\:/:/g;
289: }
290: return $title;
291: }
292:
293: sub new_accumulator {
1.25 matthew 294: my ($title,$src,$symb,$seq_id,$inputname) = @_;
1.21 matthew 295: my $target;
1.25 matthew 296: my $item_id=0;
1.21 matthew 297: return
298: sub {
299: if (@_) {
300: my ($res,$checked) = @_;
1.23 matthew 301: $target.='<tr><td><label>'.
1.21 matthew 302: '<input type="checkbox" name="'.$inputname.'" ';
303: if ($checked) {
304: $target .= 'checked ';
305: }
1.25 matthew 306: $target .= 'id="'.$seq_id.':'.$item_id++.'" ';
1.21 matthew 307: $target.=
308: 'value="'.&Apache::lonnet::escape($res->symb).'" />'.
1.26 matthew 309: ' '.$res->compTitle.'</label>'.
310: (' 'x2).'<a target="preview" '.
311: 'href="'.$res->src.'">view</a>'.
312: '</td></tr>'.$/;
1.21 matthew 313: } else {
314: if (defined($target)) {
315: return { title => $title,
316: symb => $symb,
317: src => $src,
1.25 matthew 318: id => $seq_id,
1.21 matthew 319: html => $target, };
320: }
321: return undef;
322: }
323: };
324: }
325:
326: sub get_selected_symbs {
327: my ($inputfield) = @_;
328: my $field = 'form.'.$inputfield;
329: my @Symbs;
330: if (exists($ENV{$field})) {
331: if (! ref($ENV{$field})) {
332: @Symbs = (&Apache::lonnet::unescape($ENV{$field}));
333: } else {
334: @Symbs = (map {&Apache::lonnet::unescape($_);} @{$ENV{$field}});
335: }
336: }
337: return @Symbs;
338: }
339:
340: ####################################################
341: ####################################################
342:
343: =pod
344:
1.2 matthew 345: =item &make_target_id($target)
346:
347: Inputs: Hash ref with the following entries:
348: $target->{'symb'}, $target->{'part'}, $target->{'respid'},
349: $target->{'resptype'}.
350:
351: Returns: A string, suitable for a form parameter, which uniquely identifies
352: the problem, part, and response to do statistical analysis on.
353:
354: Used by Apache::lonstathelpers::ProblemSelector().
355:
356: =cut
357:
358: ####################################################
359: ####################################################
360: sub make_target_id {
361: my ($target) = @_;
362: my $id = &Apache::lonnet::escape($target->{'symb'}).':'.
363: &Apache::lonnet::escape($target->{'part'}).':'.
364: &Apache::lonnet::escape($target->{'respid'}).':'.
365: &Apache::lonnet::escape($target->{'resptype'});
366: return $id;
367: }
368:
369: ####################################################
370: ####################################################
371:
372: =pod
373:
374: =item &get_target_from_id($id)
375:
376: Inputs: $id, a scalar string from Apache::lonstathelpers::make_target_id().
377:
378: Returns: A hash reference, $target, containing the following keys:
379: $target->{'symb'}, $target->{'part'}, $target->{'respid'},
380: $target->{'resptype'}.
381:
382: =cut
383:
384: ####################################################
385: ####################################################
386: sub get_target_from_id {
387: my ($id) = @_;
1.21 matthew 388: if (! ref($id)) {
389: my ($symb,$part,$respid,$resptype) = split(':',$id);
390: return ({ symb => &Apache::lonnet::unescape($symb),
391: part => &Apache::lonnet::unescape($part),
392: respid => &Apache::lonnet::unescape($respid),
393: resptype => &Apache::lonnet::unescape($resptype)});
394: } elsif (ref($id) eq 'ARRAY') {
395: my @Return;
396: foreach my $selected (@$id) {
397: my ($symb,$part,$respid,$resptype) = split(':',$selected);
398: push(@Return,{ symb => &Apache::lonnet::unescape($symb),
399: part => &Apache::lonnet::unescape($part),
400: respid => &Apache::lonnet::unescape($respid),
401: resptype => &Apache::lonnet::unescape($resptype)});
402: }
403: return \@Return;
404: }
1.2 matthew 405: }
406:
407: ####################################################
408: ####################################################
409:
410: =pod
411:
1.13 matthew 412: =item &get_prev_curr_next($target,$AcceptableResponseTypes,$granularity)
1.2 matthew 413:
414: Determine the problem parts or responses preceeding and following the
415: current resource.
416:
417: Inputs: $target (see &Apache::lonstathelpers::get_target_from_id())
418: $AcceptableResponseTypes, regular expression matching acceptable
419: response types,
1.13 matthew 420: $granularity, either 'part', 'response', or 'part_survey'
1.2 matthew 421:
422: Returns: three hash references, $prev, $curr, $next, which refer to the
423: preceeding, current, or following problem parts or responses, depending
424: on the value of $granularity. Values of undef indicate there is no
425: previous or next part/response. A value of undef for all three indicates
426: there was no match found to the current part/resource.
427:
428: The hash references contain the following keys:
429: symb, part, resource
430:
431: If $granularity eq 'response', the following ADDITIONAL keys will be present:
432: respid, resptype
433:
434: =cut
435:
436: ####################################################
437: ####################################################
438: sub get_prev_curr_next {
439: my ($target,$AcceptableResponseTypes,$granularity) = @_;
440: #
441: # Build an array with the data we need to search through
442: my @Resource;
1.12 matthew 443: foreach my $seq (&Apache::lonstatistics::Sequences_with_Assess('all')) {
1.2 matthew 444: foreach my $res (@{$seq->{'contents'}}) {
445: next if ($res->{'type'} ne 'assessment');
446: foreach my $part (@{$res->{'parts'}}) {
447: my $partdata = $res->{'partdata'}->{$part};
1.20 matthew 448: if ($partdata->{'Survey'} && ($granularity eq 'part_survey')){
449: push (@Resource,
450: { symb => $res->{symb},
451: part => $part,
452: resource => $res,
453: } );
1.13 matthew 454: } elsif ($granularity eq 'part') {
1.2 matthew 455: push (@Resource,
456: { symb => $res->{symb},
457: part => $part,
458: resource => $res,
459: } );
460: } elsif ($granularity eq 'response') {
461: for (my $i=0;
462: $i<scalar(@{$partdata->{'ResponseTypes'}});
463: $i++){
464: my $respid = $partdata->{'ResponseIds'}->[$i];
465: my $resptype = $partdata->{'ResponseTypes'}->[$i];
466: next if ($resptype !~ m/$AcceptableResponseTypes/);
467: push (@Resource,
468: { symb => $res->{symb},
469: part => $part,
470: respid => $partdata->{'ResponseIds'}->[$i],
471: resource => $res,
472: resptype => $resptype
473: } );
474: }
475: }
476: }
477: }
478: }
479: #
480: # Get the index of the current situation
481: my $curr_idx;
482: for ($curr_idx=0;$curr_idx<$#Resource;$curr_idx++) {
483: my $curr_item = $Resource[$curr_idx];
1.13 matthew 484: if ($granularity eq 'part' || $granularity eq 'part_survey') {
1.2 matthew 485: if ($curr_item->{'symb'} eq $target->{'symb'} &&
486: $curr_item->{'part'} eq $target->{'part'}) {
487: last;
488: }
489: } elsif ($granularity eq 'response') {
490: if ($curr_item->{'symb'} eq $target->{'symb'} &&
491: $curr_item->{'part'} eq $target->{'part'} &&
492: $curr_item->{'respid'} eq $target->{'respid'} &&
493: $curr_item->{'resptype'} eq $target->{'resptype'}) {
494: last;
495: }
496: }
497: }
498: my $curr_item = $Resource[$curr_idx];
1.13 matthew 499: if ($granularity eq 'part' || $granularity eq 'part_survey') {
1.2 matthew 500: if ($curr_item->{'symb'} ne $target->{'symb'} ||
501: $curr_item->{'part'} ne $target->{'part'}) {
502: # bogus symb - return nothing
503: return (undef,undef,undef);
504: }
505: } elsif ($granularity eq 'response') {
506: if ($curr_item->{'symb'} ne $target->{'symb'} ||
507: $curr_item->{'part'} ne $target->{'part'} ||
508: $curr_item->{'respid'} ne $target->{'respid'} ||
509: $curr_item->{'resptype'} ne $target->{'resptype'}){
510: # bogus symb - return nothing
511: return (undef,undef,undef);
512: }
513: }
514: #
515: # Now just pick up the data we need
516: my ($prev,$curr,$next);
517: if ($curr_idx == 0) {
518: $prev = undef;
519: $curr = $Resource[$curr_idx ];
520: $next = $Resource[$curr_idx+1];
521: } elsif ($curr_idx == $#Resource) {
522: $prev = $Resource[$curr_idx-1];
523: $curr = $Resource[$curr_idx ];
524: $next = undef;
525: } else {
526: $prev = $Resource[$curr_idx-1];
527: $curr = $Resource[$curr_idx ];
528: $next = $Resource[$curr_idx+1];
529: }
530: return ($prev,$curr,$next);
1.4 matthew 531: }
532:
1.9 matthew 533:
534: #####################################################
535: #####################################################
536:
537: =pod
538:
539: =item GetStudentAnswers($r,$problem,$Students)
540:
541: Determines the correct answer for a set of students on a given problem.
542: The students answers are stored in the student hashes pointed to by the
543: array @$Students under the key 'answer'.
544:
545: Inputs: $r
546: $problem: hash reference containing the keys 'resource', 'part', and 'respid'.
547: $Students: reference to array containing student hashes (need 'username',
548: 'domain').
549:
550: Returns: nothing
551:
552: =cut
553:
554: #####################################################
555: #####################################################
556: sub GetStudentAnswers {
1.12 matthew 557: my ($r,$problem,$Students,$formname,$inputname) = @_;
1.31 ! matthew 558: my %answers;
1.12 matthew 559: my $status_type;
560: if (defined($formname)) {
561: $status_type = 'inline';
562: } else {
563: $status_type = 'popup';
564: }
1.9 matthew 565: my $c = $r->connection();
566: my %Answers;
567: my ($resource,$partid,$respid) = ($problem->{'resource'},
568: $problem->{'part'},
569: $problem->{'respid'});
570: # Read in the cache (if it exists) before we start timing things.
571: &Apache::lonstathelpers::ensure_proper_cache($resource->{'symb'});
572: # Open progress window
573: my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin
574: ($r,'Student Answer Compilation Status',
1.12 matthew 575: 'Student Answer Compilation Progress', scalar(@$Students),
576: $status_type,undef,$formname,$inputname);
1.9 matthew 577: $r->rflush();
578: foreach my $student (@$Students) {
579: last if ($c->aborted());
580: my $sname = $student->{'username'};
581: my $sdom = $student->{'domain'};
1.30 matthew 582: my $answer = &Apache::lonstathelpers::get_student_answer
1.9 matthew 583: ($resource,$sname,$sdom,$partid,$respid);
584: &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,
585: &mt('last student'));
1.31 ! matthew 586: $answers{$answer}++;
1.9 matthew 587: $student->{'answer'} = $answer;
588: }
1.29 matthew 589: &Apache::lonstathelpers::write_analysis_cache();
1.9 matthew 590: return if ($c->aborted());
591: $r->rflush();
592: # close progress window
593: &Apache::lonhtmlcommon::Close_PrgWin($r,\%prog_state);
1.31 ! matthew 594: return \%answers;
1.9 matthew 595: }
1.4 matthew 596:
597: #####################################################
598: #####################################################
599:
600: =pod
601:
602: =item analyze_problem_as_student
603:
1.30 matthew 604: Analyzes a homework problem for a student
1.4 matthew 605:
606: Inputs: $resource: a resource object
607: $sname, $sdom, $partid, $respid
608:
1.30 matthew 609: Returns: the problem analysis hash
1.6 matthew 610:
1.4 matthew 611: =cut
612:
613: #####################################################
614: #####################################################
615: sub analyze_problem_as_student {
1.30 matthew 616: my ($resource,$sname,$sdom) = @_;
1.22 matthew 617: if (ref($resource) ne 'HASH') {
618: my $res = $resource;
619: $resource = { 'src' => $res->src,
620: 'symb' => $res->symb,
621: 'parts' => $res->parts };
622: foreach my $part (@{$resource->{'parts'}}) {
623: $resource->{'partdata'}->{$part}->{'ResponseIds'}=
624: [$res->responseIds($part)];
625: }
626: }
1.4 matthew 627: my $url = $resource->{'src'};
628: my $symb = $resource->{'symb'};
1.29 matthew 629: my $analysis = &get_from_analysis_cache($sname,$sdom,$symb);
630: if (! defined($analysis)) {
631: my $courseid = $ENV{'request.course.id'};
632: my $Answ=&Apache::lonnet::ssi($url,('grade_target' => 'analyze',
633: 'grade_domain' => $sdom,
634: 'grade_username' => $sname,
635: 'grade_symb' => $symb,
636: 'grade_courseid' => $courseid));
637: (my $garbage,$analysis)=split(/_HASH_REF__/,$Answ,2);
638: &store_analysis($sname,$sdom,$symb,$analysis);
639: }
640: my %Answer=&Apache::lonnet::str2hash($analysis);
1.6 matthew 641: #
1.30 matthew 642: return \%Answer;
643: }
644:
645: #####################################################
646: #####################################################
647:
648: =pod
649:
650: =item get_student_answer
651:
652: Analyzes a homework problem for a particular student and returns the correct
653: answer. Attempts to put together an answer for problem types
654: that do not natively support it.
655:
656: Inputs: $resource: a resource object (from navmaps or hash from loncoursedata)
657: $sname, $sdom, $partid, $respid
658:
659: Returns: $answer
660:
661: If $partid and $respid are specified, $answer is simply a scalar containing
662: the correct answer for the response.
663:
664: If $partid or $respid are undefined, $answer will be a hash reference with
665: keys $partid.'.'.$respid.'.answer'.
666:
667: =cut
668:
669: #####################################################
670: #####################################################
671: sub get_student_answer {
672: my ($resource,$sname,$sdom,$partid,$respid) = @_;
673: #
674: if (ref($resource) ne 'HASH') {
675: my $res = $resource;
676: $resource = { 'src' => $res->src,
677: 'symb' => $res->symb,
678: 'parts' => $res->parts };
679: foreach my $part (@{$resource->{'parts'}}) {
680: $resource->{'partdata'}->{$part}->{'ResponseIds'}=
681: [$res->responseIds($part)];
682: }
683: }
684: #
685: my $analysis =
686: &analyze_problem_as_student($resource,$sname,$sdom);
1.29 matthew 687: my $answer;
1.8 matthew 688: foreach my $partid (@{$resource->{'parts'}}) {
1.6 matthew 689: my $partdata = $resource->{'partdata'}->{$partid};
690: foreach my $respid (@{$partdata->{'ResponseIds'}}) {
691: my $prefix = $partid.'.'.$respid;
692: my $key = $prefix.'.answer';
1.30 matthew 693: $answer->{$partid}->{$respid} =
694: &get_answer($prefix,$key,%$analysis);
1.6 matthew 695: }
1.8 matthew 696: }
1.30 matthew 697: my $returnvalue;
1.8 matthew 698: if (! defined($partid)) {
699: $returnvalue = $answer;
700: } elsif (! defined($respid)) {
701: $returnvalue = $answer->{$partid};
1.6 matthew 702: } else {
1.8 matthew 703: $returnvalue = $answer->{$partid}->{$respid};
1.6 matthew 704: }
705: return $returnvalue;
706: }
707:
708: sub get_answer {
709: my ($prefix,$key,%Answer) = @_;
710: my $returnvalue;
1.4 matthew 711: if (exists($Answer{$key})) {
712: my $student_answer = $Answer{$key}->[0];
713: if (! defined($student_answer)) {
714: $student_answer = $Answer{$key}->[1];
715: }
716: $returnvalue = $student_answer;
717: } else {
718: if (exists($Answer{$prefix.'.shown'})) {
719: # The response has foils
720: my %values;
721: while (my ($k,$v) = each(%Answer)) {
722: next if ($k !~ /^$prefix\.foil\.(value|area)\.(.*)$/);
723: my $foilname = $2;
724: $values{$foilname}=$v;
725: }
726: foreach my $foil (@{$Answer{$prefix.'.shown'}}) {
727: if (ref($values{$foil}) eq 'ARRAY') {
1.10 albertel 728: $returnvalue.=&HTML::Entities::encode($foil,'<>&"').'='.
729: join(',',map {&HTML::Entities::encode($_,'<>&"')} @{$values{$foil}}).'&';
1.4 matthew 730: } else {
1.10 albertel 731: $returnvalue.=&HTML::Entities::encode($foil,'<>&"').'='.
732: &HTML::Entities::encode($values{$foil},'<>&"').'&';
1.4 matthew 733: }
734: }
735: $returnvalue =~ s/ /\%20/g;
736: chop ($returnvalue);
737: }
738: }
739: return $returnvalue;
740: }
1.8 matthew 741:
742: #####################################################
743: #####################################################
744:
745: =pod
746:
747: =item Caching routines
748:
749: =over 4
750:
1.29 matthew 751: =item &load_analysis_cache($symb)
1.8 matthew 752:
753: Loads the cache for the given symb into memory from disk.
754: Requires the cache filename be set.
755: Only should be called by &ensure_proper_cache.
756:
757: =cut
758:
759: #####################################################
760: #####################################################
761: {
762: my $cache_filename = undef;
763: my $current_symb = undef;
764: my %cache;
765:
1.29 matthew 766: sub load_analysis_cache {
1.8 matthew 767: my ($symb) = @_;
768: return if (! defined($cache_filename));
769: if (! defined($current_symb) || $current_symb ne $symb) {
770: undef(%cache);
771: my $storedstring;
772: my %cache_db;
773: if (tie(%cache_db,'GDBM_File',$cache_filename,&GDBM_READER(),0640)) {
774: $storedstring = $cache_db{&Apache::lonnet::escape($symb)};
775: untie(%cache_db);
776: }
777: if (defined($storedstring)) {
778: %cache = %{thaw($storedstring)};
779: }
780: }
781: return;
782: }
783:
784: #####################################################
785: #####################################################
786:
787: =pod
788:
1.29 matthew 789: =item &get_from_analysis_cache($sname,$sdom,$symb,$partid,$respid)
1.8 matthew 790:
791: Returns the appropriate data from the cache, or undef if no data exists.
792:
793: =cut
794:
795: #####################################################
796: #####################################################
1.29 matthew 797: sub get_from_analysis_cache {
798: my ($sname,$sdom,$symb) = @_;
1.8 matthew 799: &ensure_proper_cache($symb);
800: my $returnvalue;
1.29 matthew 801: if (exists($cache{$sname.':'.$sdom})) {
802: $returnvalue = $cache{$sname.':'.$sdom};
1.8 matthew 803: } else {
804: $returnvalue = undef;
805: }
806: return $returnvalue;
807: }
808:
809: #####################################################
810: #####################################################
811:
812: =pod
813:
1.29 matthew 814: =item &write_analysis_cache($symb)
1.8 matthew 815:
816: Writes the in memory cache to disk so that it can be read in with
1.29 matthew 817: &load_analysis_cache($symb).
1.8 matthew 818:
819: =cut
820:
821: #####################################################
822: #####################################################
1.29 matthew 823: sub write_analysis_cache {
1.8 matthew 824: return if (! defined($current_symb) || ! defined($cache_filename));
825: my %cache_db;
826: my $key = &Apache::lonnet::escape($current_symb);
827: if (tie(%cache_db,'GDBM_File',$cache_filename,&GDBM_WRCREAT(),0640)) {
828: my $storestring = freeze(\%cache);
829: $cache_db{$key}=$storestring;
830: $cache_db{$key.'.time'}=time;
831: untie(%cache_db);
832: }
833: undef(%cache);
834: undef($current_symb);
835: undef($cache_filename);
836: return;
837: }
838:
839: #####################################################
840: #####################################################
841:
842: =pod
843:
844: =item &ensure_proper_cache($symb)
845:
846: Called to make sure we have the proper cache set up. This is called
1.29 matthew 847: prior to every analysis lookup.
1.8 matthew 848:
849: =cut
850:
851: #####################################################
852: #####################################################
853: sub ensure_proper_cache {
854: my ($symb) = @_;
855: my $cid = $ENV{'request.course.id'};
856: my $new_filename = '/home/httpd/perl/tmp/'.
1.29 matthew 857: 'problemanalysis_'.$cid.'_analysis_cache.db';
1.8 matthew 858: if (! defined($cache_filename) ||
859: $cache_filename ne $new_filename ||
860: ! defined($current_symb) ||
861: $current_symb ne $symb) {
862: $cache_filename = $new_filename;
863: # Notice: $current_symb is not set to $symb until after the cache is
1.29 matthew 864: # loaded. This is what tells &load_analysis_cache to load in a new
1.8 matthew 865: # symb cache.
1.29 matthew 866: &load_analysis_cache($symb);
1.8 matthew 867: $current_symb = $symb;
868: }
869: }
870:
871: #####################################################
872: #####################################################
873:
874: =pod
875:
1.29 matthew 876: =item &store_analysis($sname,$sdom,$symb,$partid,$respid,$dataset)
1.8 matthew 877:
1.29 matthew 878: Stores the analysis data in the in memory cache.
1.8 matthew 879:
880: =cut
881:
882: #####################################################
883: #####################################################
1.29 matthew 884: sub store_analysis {
885: my ($sname,$sdom,$symb,$dataset) = @_;
1.8 matthew 886: return if ($symb ne $current_symb);
1.29 matthew 887: $cache{$sname.':'.$sdom}=$dataset;
1.8 matthew 888: return;
889: }
890:
891: }
892: #####################################################
893: #####################################################
894:
895: =pod
896:
897: =back
898:
899: =cut
900:
901: #####################################################
902: #####################################################
1.4 matthew 903:
904: ##
905: ## The following is copied from datecalc1.pl, part of the
906: ## Spreadsheet::WriteExcel CPAN module.
907: ##
908: ##
909: ######################################################################
910: #
911: # Demonstration of writing date/time cells to Excel spreadsheets,
912: # using UNIX/Perl time as source of date/time.
913: #
914: # Copyright 2000, Andrew Benham, adsb@bigfoot.com
915: #
916: ######################################################################
917: #
918: # UNIX/Perl time is the time since the Epoch (00:00:00 GMT, 1 Jan 1970)
919: # measured in seconds.
920: #
921: # An Excel file can use exactly one of two different date/time systems.
922: # In these systems, a floating point number represents the number of days
923: # (and fractional parts of the day) since a start point. The floating point
924: # number is referred to as a 'serial'.
925: # The two systems ('1900' and '1904') use different starting points:
926: # '1900'; '1.00' is 1 Jan 1900 BUT 1900 is erroneously regarded as
927: # a leap year - see:
928: # http://support.microsoft.com/support/kb/articles/Q181/3/70.asp
929: # for the excuse^H^H^H^H^H^Hreason.
930: # '1904'; '1.00' is 2 Jan 1904.
931: #
932: # The '1904' system is the default for Apple Macs. Windows versions of
933: # Excel have the option to use the '1904' system.
934: #
935: # Note that Visual Basic's "DateSerial" function does NOT erroneously
936: # regard 1900 as a leap year, and thus its serials do not agree with
937: # the 1900 serials of Excel for dates before 1 Mar 1900.
938: #
939: # Note that StarOffice (at least at version 5.2) does NOT erroneously
940: # regard 1900 as a leap year, and thus its serials do not agree with
941: # the 1900 serials of Excel for dates before 1 Mar 1900.
942: #
943: ######################################################################
944: #
945: # Calculation description
946: # =======================
947: #
948: # 1900 system
949: # -----------
950: # Unix time is '0' at 00:00:00 GMT 1 Jan 1970, i.e. 70 years after 1 Jan 1900.
951: # Of those 70 years, 17 (1904,08,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68)
952: # were leap years with an extra day.
953: # Thus there were 17 + 70*365 days = 25567 days between 1 Jan 1900 and
954: # 1 Jan 1970.
955: # In the 1900 system, '1' is 1 Jan 1900, but as 1900 was not a leap year
956: # 1 Jan 1900 should really be '2', so 1 Jan 1970 is '25569'.
957: #
958: # 1904 system
959: # -----------
960: # Unix time is '0' at 00:00:00 GMT 1 Jan 1970, i.e. 66 years after 1 Jan 1904.
961: # Of those 66 years, 17 (1904,08,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68)
962: # were leap years with an extra day.
963: # Thus there were 17 + 66*365 days = 24107 days between 1 Jan 1904 and
964: # 1 Jan 1970.
965: # In the 1904 system, 2 Jan 1904 being '1', 1 Jan 1970 is '24107'.
966: #
967: ######################################################################
968: #
969: # Copyright (c) 2000, Andrew Benham.
970: # This program is free software. It may be used, redistributed and/or
971: # modified under the same terms as Perl itself.
972: #
973: # Andrew Benham, adsb@bigfoot.com
974: # London, United Kingdom
975: # 11 Nov 2000
976: #
977: ######################################################################
978: #-----------------------------------------------------------
979: # calc_serial()
980: #
981: # Called with (up to) 2 parameters.
982: # 1. Unix timestamp. If omitted, uses current time.
983: # 2. GMT flag. Set to '1' to return serial in GMT.
984: # If omitted, returns serial in appropriate timezone.
985: #
986: # Returns date/time serial according to $DATE_SYSTEM selected
987: #-----------------------------------------------------------
988: sub calc_serial {
989: # Use 1900 date system on all platforms other than Apple Mac (for which
990: # use 1904 date system).
991: my $DATE_SYSTEM = ($^O eq 'MacOS') ? 1 : 0;
992: my $time = (defined $_[0]) ? $_[0] : time();
993: my $gmtflag = (defined $_[1]) ? $_[1] : 0;
994: #
995: # Divide timestamp by number of seconds in a day.
996: # This gives a date serial with '0' on 1 Jan 1970.
997: my $serial = $time / 86400;
998: #
999: # Adjust the date serial by the offset appropriate to the
1000: # currently selected system (1900/1904).
1001: if ($DATE_SYSTEM == 0) { # use 1900 system
1002: $serial += 25569;
1003: } else { # use 1904 system
1004: $serial += 24107;
1005: }
1006: #
1007: unless ($gmtflag) {
1008: # Now have a 'raw' serial with the right offset. But this
1009: # gives a serial in GMT, which is false unless the timezone
1010: # is GMT. We need to adjust the serial by the appropriate
1011: # timezone offset.
1012: # Calculate the appropriate timezone offset by seeing what
1013: # the differences between localtime and gmtime for the given
1014: # time are.
1015: #
1016: my @gmtime = gmtime($time);
1017: my @ltime = localtime($time);
1018: #
1019: # For the first 7 elements of the two arrays, adjust the
1020: # date serial where the elements differ.
1021: for (0 .. 6) {
1022: my $diff = $ltime[$_] - $gmtime[$_];
1023: if ($diff) {
1024: $serial += _adjustment($diff,$_);
1025: }
1026: }
1027: }
1028: #
1029: # Perpetuate the error that 1900 was a leap year by decrementing
1030: # the serial if we're using the 1900 system and the date is prior to
1031: # 1 Mar 1900. This has the effect of making serial value '60'
1032: # 29 Feb 1900.
1033: #
1034: # This fix only has any effect if UNIX/Perl time on the platform
1035: # can represent 1900. Many can't.
1036: #
1037: unless ($DATE_SYSTEM) {
1038: $serial-- if ($serial < 61); # '61' is 1 Mar 1900
1039: }
1040: return $serial;
1041: }
1042:
1043: sub _adjustment {
1044: # Based on the difference in the localtime/gmtime array elements
1045: # number, return the adjustment required to the serial.
1046: #
1047: # We only look at some elements of the localtime/gmtime arrays:
1048: # seconds unlikely to be different as all known timezones
1049: # have an offset of integral multiples of 15 minutes,
1050: # but it's easy to do.
1051: # minutes will be different for timezone offsets which are
1052: # not an exact number of hours.
1053: # hours very likely to be different.
1054: # weekday will differ when localtime/gmtime difference
1055: # straddles midnight.
1056: #
1057: # Assume that difference between localtime and gmtime is less than
1058: # 5 days, then don't have to do maths for day of month, month number,
1059: # year number, etc...
1060: #
1061: my ($delta,$element) = @_;
1062: my $adjust = 0;
1063: #
1064: if ($element == 0) { # Seconds
1065: $adjust = $delta/86400; # 60 * 60 * 24
1066: } elsif ($element == 1) { # Minutes
1067: $adjust = $delta/1440; # 60 * 24
1068: } elsif ($element == 2) { # Hours
1069: $adjust = $delta/24; # 24
1070: } elsif ($element == 6) { # Day of week number
1071: # Catch difference straddling Sat/Sun in either direction
1072: $delta += 7 if ($delta < -4);
1073: $delta -= 7 if ($delta > 4);
1074: #
1075: $adjust = $delta;
1076: }
1077: return $adjust;
1078: }
1079:
1080: ###########################################################
1081: ###########################################################
1082:
1083: =pod
1084:
1085: =item get_problem_data
1086:
1087: Returns a data structure describing the problem.
1088:
1089: Inputs: $url
1090:
1091: Returns: %Partdata
1092:
1093: =cut
1094:
1095: ## note: we must force each foil and option to not begin or end with
1096: ## spaces as they are stored without such data.
1097: ##
1098: ###########################################################
1099: ###########################################################
1100: sub get_problem_data {
1101: my ($url) = @_;
1102: my $Answ=&Apache::lonnet::ssi($url,('grade_target' => 'analyze'));
1103: (my $garbage,$Answ)=split(/_HASH_REF__/,$Answ,2);
1104: my %Answer;
1105: %Answer=&Apache::lonnet::str2hash($Answ);
1106: my %Partdata;
1107: foreach my $part (@{$Answer{'parts'}}) {
1108: while (my($key,$value) = each(%Answer)) {
1109: #
1110: # Logging code:
1.7 matthew 1111: if (0) {
1.4 matthew 1112: &Apache::lonnet::logthis($part.' got key "'.$key.'"');
1113: if (ref($value) eq 'ARRAY') {
1114: &Apache::lonnet::logthis(' @'.join(',',@$value));
1115: } else {
1116: &Apache::lonnet::logthis(' '.$value);
1117: }
1118: }
1119: # End of logging code
1120: next if ($key !~ /^$part/);
1121: $key =~ s/^$part\.//;
1122: if (ref($value) eq 'ARRAY') {
1123: if ($key eq 'options') {
1124: $Partdata{$part}->{'_Options'}=$value;
1125: } elsif ($key eq 'concepts') {
1126: $Partdata{$part}->{'_Concepts'}=$value;
1.28 matthew 1127: } elsif ($key eq 'items') {
1128: $Partdata{$part}->{'_Items'}=$value;
1.4 matthew 1129: } elsif ($key =~ /^concept\.(.*)$/) {
1130: my $concept = $1;
1131: foreach my $foil (@$value) {
1132: $Partdata{$part}->{'_Foils'}->{$foil}->{'_Concept'}=
1133: $concept;
1134: }
1.28 matthew 1135: } elsif ($key =~ /^(incorrect|answer|ans_low|ans_high|str_type)$/) {
1.4 matthew 1136: $Partdata{$part}->{$key}=$value;
1137: }
1138: } else {
1139: if ($key=~ /^foil\.text\.(.*)$/) {
1140: my $foil = $1;
1141: $Partdata{$part}->{'_Foils'}->{$foil}->{'name'}=$foil;
1142: $value =~ s/(\s*$|^\s*)//g;
1143: $Partdata{$part}->{'_Foils'}->{$foil}->{'text'}=$value;
1144: } elsif ($key =~ /^foil\.value\.(.*)$/) {
1145: my $foil = $1;
1146: $Partdata{$part}->{'_Foils'}->{$foil}->{'value'}=$value;
1.28 matthew 1147: } elsif ($key eq 'answercomputed') {
1148: $Partdata{$part}->{'answercomputed'} = $value;
1.4 matthew 1149: }
1150: }
1151: }
1152: }
1.28 matthew 1153: # Further debugging code
1154: if (0) {
1155: &Apache::lonnet::logthis('lonstathelpers::get_problem_data');
1156: &log_hash_ref(\%Partdata);
1157: }
1.4 matthew 1158: return %Partdata;
1.5 matthew 1159: }
1160:
1.28 matthew 1161: sub log_array_ref {
1162: my ($arrayref,$prefix) = @_;
1163: return if (ref($arrayref) ne 'ARRAY');
1164: if (! defined($prefix)) { $prefix = ''; };
1165: foreach my $v (@$arrayref) {
1166: if (ref($v) eq 'ARRAY') {
1167: &log_array_ref($v,$prefix.' ');
1168: } elsif (ref($v) eq 'HASH') {
1169: &log_hash_ref($v,$prefix.' ');
1170: } else {
1171: &Apache::lonnet::logthis($prefix.'"'.$v.'"');
1172: }
1173: }
1174: }
1175:
1176: sub log_hash_ref {
1177: my ($hashref,$prefix) = @_;
1178: return if (ref($hashref) ne 'HASH');
1179: if (! defined($prefix)) { $prefix = ''; };
1180: while (my ($k,$v) = each(%$hashref)) {
1181: if (ref($v) eq 'ARRAY') {
1182: &Apache::lonnet::logthis($prefix.'"'.$k.'" = array');
1183: &log_array_ref($v,$prefix.' ');
1184: } elsif (ref($v) eq 'HASH') {
1185: &Apache::lonnet::logthis($prefix.'"'.$k.'" = hash');
1186: &log_hash_ref($v,$prefix.' ');
1187: } else {
1188: &Apache::lonnet::logthis($prefix.'"'.$k.'" => "'.$v.'"');
1189: }
1190: }
1191: }
1.5 matthew 1192: ####################################################
1193: ####################################################
1194:
1195: =pod
1196:
1197: =item &limit_by_time()
1198:
1199: =cut
1200:
1201: ####################################################
1202: ####################################################
1203: sub limit_by_time_form {
1204: my $Starttime_form = '';
1205: my $starttime = &Apache::lonhtmlcommon::get_date_from_form
1206: ('limitby_startdate');
1207: my $endtime = &Apache::lonhtmlcommon::get_date_from_form
1208: ('limitby_enddate');
1209: if (! defined($endtime)) {
1210: $endtime = time;
1211: }
1212: if (! defined($starttime)) {
1213: $starttime = $endtime - 60*60*24*7;
1214: }
1215: my $state;
1216: if (&limit_by_time()) {
1217: $state = '';
1218: } else {
1219: $state = 'disabled';
1220: }
1221: my $startdateform = &Apache::lonhtmlcommon::date_setter
1222: ('Statistics','limitby_startdate',$starttime,undef,undef,$state);
1223: my $enddateform = &Apache::lonhtmlcommon::date_setter
1224: ('Statistics','limitby_enddate',$endtime,undef,undef,$state);
1225: my $Str;
1226: $Str .= '<script language="Javascript" >';
1227: $Str .= 'function toggle_limitby_activity(state) {';
1228: $Str .= ' if (state) {';
1229: $Str .= ' limitby_startdate_enable();';
1230: $Str .= ' limitby_enddate_enable();';
1231: $Str .= ' } else {';
1232: $Str .= ' limitby_startdate_disable();';
1233: $Str .= ' limitby_enddate_disable();';
1234: $Str .= ' }';
1235: $Str .= '}';
1236: $Str .= '</script>';
1237: $Str .= '<fieldset>';
1238: my $timecheckbox = '<input type="checkbox" name="limit_by_time" ';
1239: if (&limit_by_time()) {
1240: $timecheckbox .= ' checked ';
1241: }
1242: $timecheckbox .= 'OnChange="javascript:toggle_limitby_activity(this.checked);" ';
1243: $timecheckbox .= ' />';
1244: $Str .= '<legend>'.&mt('[_1] Limit by time',$timecheckbox).'</legend>';
1245: $Str .= &mt('Start Time: [_1]',$startdateform).'<br />';
1246: $Str .= &mt(' End Time: [_1]',$enddateform).'<br />';
1247: $Str .= '</fieldset>';
1248: return $Str;
1249: }
1250:
1251: sub limit_by_time {
1252: if (exists($ENV{'form.limit_by_time'}) &&
1253: $ENV{'form.limit_by_time'} ne '' ) {
1254: return 1;
1255: } else {
1256: return 0;
1257: }
1258: }
1259:
1260: sub get_time_limits {
1261: my $starttime = &Apache::lonhtmlcommon::get_date_from_form
1262: ('limitby_startdate');
1263: my $endtime = &Apache::lonhtmlcommon::get_date_from_form
1264: ('limitby_enddate');
1265: return ($starttime,$endtime);
1.11 matthew 1266: }
1267:
1268:
1269:
1270: ####################################################
1271: ####################################################
1272:
1273: =pod
1274:
1275: =item sections_description
1276:
1277: Inputs: @Sections, an array of sections
1278:
1279: Returns: A text description of the sections selected.
1280:
1281: =cut
1282:
1283: ####################################################
1284: ####################################################
1285: sub sections_description {
1286: my @Sections = @_;
1287: my $sectionstring = '';
1288: if (scalar(@Sections) > 1) {
1289: if (scalar(@Sections) > 2) {
1290: my $last = pop(@Sections);
1291: $sectionstring = "Sections ".join(', ',@Sections).', and '.$last;
1292: } else {
1293: $sectionstring = "Sections ".join(' and ',@Sections);
1294: }
1295: } else {
1296: if ($Sections[0] eq 'all') {
1297: $sectionstring = "All sections";
1298: } else {
1299: $sectionstring = "Section ".$Sections[0];
1300: }
1301: }
1302: return $sectionstring;
1.2 matthew 1303: }
1304:
1305: ####################################################
1306: ####################################################
1307:
1308: =pod
1309:
1.12 matthew 1310: =item &manage_caches
1311:
1312: Inputs: $r, apache request object
1313:
1314: Returns: An array of scalars containing html for buttons.
1315:
1316: =cut
1317:
1318: ####################################################
1319: ####################################################
1320: sub manage_caches {
1.23 matthew 1321: my ($r,$formname,$inputname,$update_message) = @_;
1.12 matthew 1322: &Apache::loncoursedata::clear_internal_caches();
1.16 matthew 1323: my $sectionkey =
1324: join(',',
1325: map {
1326: &Apache::lonnet::escape($_);
1327: } sort(@Apache::lonstatistics::SelectedSections)
1328: );
1329: my $statuskey = $Apache::lonstatistics::enrollment_status;
1.12 matthew 1330: if (exists($ENV{'form.ClearCache'}) ||
1.16 matthew 1331: exists($ENV{'form.updatecaches'}) ||
1332: (exists($ENV{'form.firstrun'}) && $ENV{'form.firstrun'} ne 'no') ||
1333: (exists($ENV{'form.prevsection'}) &&
1334: $ENV{'form.prevsection'} ne $sectionkey) ||
1335: (exists($ENV{'form.prevenrollstatus'}) &&
1336: $ENV{'form.prevenrollstatus'} ne $statuskey)
1337: ) {
1.23 matthew 1338: if (defined($update_message)) {
1339: $r->print($update_message);
1340: }
1.12 matthew 1341: &Apache::lonstatistics::Gather_Full_Student_Data($r,$formname,
1342: $inputname);
1.23 matthew 1343:
1.12 matthew 1344: }
1345: #
1.16 matthew 1346: my @Buttons =
1347: ('<input type="submit" name="ClearCache" '.
1348: 'value="'.&mt('Clear Caches').'" />',
1349: '<input type="submit" name="updatecaches" '.
1.17 matthew 1350: 'value="'.&mt('Update Caches').'" />'.
1351: &Apache::loncommon::help_open_topic('Statistics_Cache'),
1.16 matthew 1352: '<input type="hidden" name="prevsection" value="'.$sectionkey.'" />',
1353: '<input type="hidden" name="prevenrollstatus" value="'.$statuskey.'" />'
1354: );
1355: #
1.12 matthew 1356: if (! exists($ENV{'form.firstrun'})) {
1357: $r->print('<input type="hidden" name="firstrun" value="yes" />');
1358: } else {
1359: $r->print('<input type="hidden" name="firstrun" value="no" />');
1360: }
1361: #
1362: return @Buttons;
1363: }
1364:
1365:
1366:
1367:
1368: ####################################################
1369: ####################################################
1370:
1371: =pod
1372:
1.2 matthew 1373: =back
1374:
1375: =cut
1376:
1377: ####################################################
1378: ####################################################
1.1 matthew 1379:
1380: 1;
1381:
1382: __END__
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to lonstathelpers.pm CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / loncom / interface / statistics