Annotation of loncom/interface/statistics/lonstathelpers.pm, revision 1.37
1.1 matthew 1: # The LearningOnline Network with CAPA
2: #
1.37 ! matthew 3: # $Id: lonstathelpers.pm,v 1.36 2005/02/01 15:15:28 matthew Exp $
1.1 matthew 4: #
5: # Copyright Michigan State University Board of Trustees
6: #
7: # This file is part of the LearningOnline Network with CAPA (LON-CAPA).
8: #
9: # LON-CAPA is free software; you can redistribute it and/or modify
10: # it under the terms of the GNU General Public License as published by
11: # the Free Software Foundation; either version 2 of the License, or
12: # (at your option) any later version.
13: #
14: # LON-CAPA is distributed in the hope that it will be useful,
15: # but WITHOUT ANY WARRANTY; without even the implied warranty of
16: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: # GNU General Public License for more details.
18: #
19: # You should have received a copy of the GNU General Public License
20: # along with LON-CAPA; if not, write to the Free Software
21: # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22: #
23: # /home/httpd/html/adm/gpl.txt
24: #
25: # http://www.lon-capa.org/
26: #
27: ####################################################
28: ####################################################
29:
30: =pod
31:
32: =head1 NAME
33:
34: Apache::lonstathelpers - helper routines used by statistics
35:
36: =head1 SYNOPSIS
37:
38: This module provides a place to consolidate much of the statistics
39: routines that are needed across multiple statistics functions.
40:
41: =head1 OVERVIEW
42:
43: =over 4
44:
45: =cut
46:
47: ####################################################
48: ####################################################
49: package Apache::lonstathelpers;
50:
51: use strict;
52: use Apache::lonnet();
53: use Apache::loncommon();
54: use Apache::lonhtmlcommon();
55: use Apache::loncoursedata();
56: use Apache::lonstatistics;
57: use Apache::lonlocal;
58: use HTML::Entities();
59: use Time::Local();
60: use Spreadsheet::WriteExcel();
1.8 matthew 61: use GDBM_File;
62: use Storable qw(freeze thaw);
1.1 matthew 63:
64: ####################################################
65: ####################################################
66:
67: =pod
68:
69: =item &render_resource($resource)
70:
71: Input: a resource generated from
72: &Apache::loncoursedata::get_sequence_assessment_data().
73:
74: Retunrs: a scalar containing html for a rendering of the problem
75: within a table.
76:
77: =cut
78:
79: ####################################################
80: ####################################################
81: sub render_resource {
82: my ($resource) = @_;
83: ##
84: ## Render the problem
85: my $base;
86: ($base,undef) = ($resource->{'src'} =~ m|(.*/)[^/]*$|);
87: $base = "http://".$ENV{'SERVER_NAME'}.$base;
88: my $rendered_problem =
1.34 matthew 89: &Apache::lonnet::ssi_body($resource->{'src'}.'?symb='.&Apache::lonnet::escape($resource->{'symb'}));
1.1 matthew 90: $rendered_problem =~ s/<\s*form\s*/<nop /g;
91: $rendered_problem =~ s|(<\s*/form\s*>)|<\/nop>|g;
92: return '<table bgcolor="ffffff"><tr><td>'.
93: '<base href="'.$base.'" />'.
94: $rendered_problem.
95: '</td></tr></table>';
96: }
1.2 matthew 97:
98: ####################################################
99: ####################################################
100:
101: =pod
102:
103: =item &ProblemSelector($AcceptedResponseTypes)
104:
105: Input: scalar containing regular expression which matches response
106: types to show. '.' will yield all, '(option|radiobutton)' will match
107: all option response and radiobutton problems.
108:
109: Returns: A string containing html for a table which lists the sequences
110: and their contents. A radiobutton is provided for each problem.
1.14 matthew 111: Skips 'survey' problems.
1.2 matthew 112:
113: =cut
114:
115: ####################################################
116: ####################################################
117: sub ProblemSelector {
118: my ($AcceptedResponseTypes) = @_;
119: my $Str;
120: $Str = "\n<table>\n";
1.27 matthew 121: my $rb_count =0;
1.12 matthew 122: foreach my $seq (&Apache::lonstatistics::Sequences_with_Assess('all')) {
1.2 matthew 123: next if ($seq->{'num_assess'}<1);
124: my $seq_str = '';
125: foreach my $res (@{$seq->{'contents'}}) {
126: next if ($res->{'type'} ne 'assessment');
127: foreach my $part (@{$res->{'parts'}}) {
128: my $partdata = $res->{'partdata'}->{$part};
129: for (my $i=0;$i<scalar(@{$partdata->{'ResponseTypes'}});$i++){
130: my $respid = $partdata->{'ResponseIds'}->[$i];
131: my $resptype = $partdata->{'ResponseTypes'}->[$i];
132: if ($resptype =~ m/$AcceptedResponseTypes/) {
133: my $value = &make_target_id({symb=>$res->{'symb'},
134: part=>$part,
135: respid=>$respid,
136: resptype=>$resptype});
137: my $checked = '';
138: if ($ENV{'form.problemchoice'} eq $value) {
139: $checked = 'checked ';
140: }
141: my $title = $res->{'title'};
142: if (! defined($title) || $title eq '') {
143: ($title) = ($res->{'src'} =~ m:/([^/]*)$:);
144: }
1.27 matthew 145: $seq_str .= '<tr>'.
146: qq{<td><input type="radio" id="$rb_count" name="problemchoice" value="$value" $checked /></td>}.
147: '<td><label for="'.$rb_count.'">'.$resptype.'</label></td>'.
148: '<td><label for="'.$rb_count.'">'.$title.'</label>';
1.5 matthew 149: if (scalar(@{$partdata->{'ResponseIds'}}) > 1) {
1.2 matthew 150: $seq_str .= &mt('response').' '.$respid;
151: }
1.34 matthew 152: my $link = $res->{'src'}.'?symb='.
153: &Apache::lonnet::escape($res->{'symb'});
1.27 matthew 154: $seq_str .= (' 'x2).
1.34 matthew 155: qq{<a target="preview" href="$link">view</a>};
1.2 matthew 156: $seq_str .= "</td></tr>\n";
1.27 matthew 157: $rb_count++;
1.2 matthew 158: }
159: }
160: }
161: }
162: if ($seq_str ne '') {
163: $Str .= '<tr><td> </td><td colspan="2"><b>'.$seq->{'title'}.'</b></td>'.
164: "</tr>\n".$seq_str;
165: }
166: }
167: $Str .= "</table>\n";
168: return $Str;
169: }
170:
171: ####################################################
172: ####################################################
173:
174: =pod
175:
1.24 matthew 176: =item &MultipleProblemSelector($navmap,$selected,$inputname)
1.21 matthew 177:
178: Generate HTML with checkboxes for problem selection.
179:
180: Input:
181:
182: $navmap: a navmap object. If undef, navmaps will be called to create a
183: new object.
184:
185: $selected: Scalar, Array, or hash reference of currently selected items.
186:
187: $inputname: The name of the form elements to use for the checkboxs.
188:
189: Returns: A string containing html for a table which lists the sequences
190: and their contents. A checkbox is provided for each problem.
191:
192: =cut
193:
194: ####################################################
195: ####################################################
196: sub MultipleProblemSelector {
1.23 matthew 197: my ($navmap,$inputname,$formname)=@_;
1.21 matthew 198: my $cid = $ENV{'request.course.id'};
199: my $Str;
200: # Massage the input as needed.
201: if (! defined($navmap)) {
202: $navmap = Apache::lonnavmaps::navmap->new();
203: if (! defined($navmap)) {
204: $Str .=
205: '<h1>'.&mt('Error: cannot process course structure').'</h1>';
206: return $Str;
207: }
208: }
209: my $selected = {map { ($_,1) } (&get_selected_symbs($inputname))};
210: # Header
211: $Str .= <<"END";
1.25 matthew 212: <script language="JavaScript" type="text/javascript">
213: function checkall(value,seqid) {
1.21 matthew 214: for (i=0; i<document.forms.$formname.elements.length; i++) {
215: ele = document.forms.$formname.elements[i];
216: if (ele.name == '$inputname') {
1.25 matthew 217: if (seqid != null) {
218: itemid = document.forms.$formname.elements[i].id;
219: thing = itemid.split(':');
220: if (thing[0] == seqid) {
221: document.forms.$formname.elements[i].checked=value;
222: }
223: } else {
224: document.forms.$formname.elements[i].checked=value;
225: }
1.21 matthew 226: }
227: }
228: }
229: </script>
230: END
231: $Str .=
232: '<a href="javascript:checkall(true)">'.&mt('Select All').'</a>'.
233: (' 'x4).
234: '<a href="javascript:checkall(false)">'.&mt('Unselect All').'</a>';
235: $Str .= $/.'<table>'.$/;
236: my $iterator = $navmap->getIterator(undef, undef, undef, 1);
237: my $sequence_string;
1.25 matthew 238: my $seq_id = 0;
1.21 matthew 239: my @Accumulator = (&new_accumulator($ENV{'course.'.$cid.'.description'},
240: '',
241: '',
1.25 matthew 242: $seq_id++,
1.21 matthew 243: $inputname));
244: my @Sequence_Data;
245: while (my $curRes = $iterator->next()) {
246: if ($curRes == $iterator->END_MAP) {
247: if (ref($Accumulator[-1]) eq 'CODE') {
1.24 matthew 248: my $old_accumulator = pop(@Accumulator);
249: push(@Sequence_Data,&{$old_accumulator}());
1.21 matthew 250: }
251: } elsif ($curRes == $iterator->BEGIN_MAP) {
252: # Not much to do here.
253: }
254: next if (! ref($curRes));
255: if ($curRes->is_map) {
1.24 matthew 256: push(@Accumulator,&new_accumulator($curRes->compTitle,
1.21 matthew 257: $curRes->src,
258: $curRes->symb,
1.25 matthew 259: $seq_id++,
1.21 matthew 260: $inputname));
261: } elsif ($curRes->is_problem) {
262: if (@Accumulator && $Accumulator[-1] ne '') {
263: &{$Accumulator[-1]}($curRes,
264: exists($selected->{$curRes->symb}));
265: }
266: }
267: }
268: my $course_seq = pop(@Sequence_Data);
269: foreach my $seq ($course_seq,@Sequence_Data) {
270: #my $seq = pop(@Sequence_Data);
271: next if (! defined($seq) || ref($seq) ne 'HASH');
272: $Str.= '<tr><td colspan="2">'.
1.25 matthew 273: '<b>'.$seq->{'title'}.'</b>'.(' 'x2).
274: '<a href="javascript:checkall(true,'.$seq->{'id'}.')">'.
275: &mt('Select').'</a>'.(' 'x2).
276: '<a href="javascript:checkall(false,'.$seq->{'id'}.')">'.
277: &mt('Unselect').'</a>'.(' 'x2).
1.21 matthew 278: '</td></tr>'.$/;
279: $Str.= $seq->{'html'};
280: }
281: $Str .= '</table>'.$/;
282: return $Str;
283: }
284:
285: sub new_accumulator {
1.25 matthew 286: my ($title,$src,$symb,$seq_id,$inputname) = @_;
1.21 matthew 287: my $target;
1.25 matthew 288: my $item_id=0;
1.21 matthew 289: return
290: sub {
291: if (@_) {
292: my ($res,$checked) = @_;
1.23 matthew 293: $target.='<tr><td><label>'.
1.21 matthew 294: '<input type="checkbox" name="'.$inputname.'" ';
295: if ($checked) {
296: $target .= 'checked ';
297: }
1.25 matthew 298: $target .= 'id="'.$seq_id.':'.$item_id++.'" ';
1.21 matthew 299: $target.=
300: 'value="'.&Apache::lonnet::escape($res->symb).'" />'.
1.26 matthew 301: ' '.$res->compTitle.'</label>'.
302: (' 'x2).'<a target="preview" '.
1.34 matthew 303: 'href="'.$res->src.'?symb='.
304: &Apache::lonnet::escape($res->{'symb'}).'">view</a>'.
1.26 matthew 305: '</td></tr>'.$/;
1.21 matthew 306: } else {
307: if (defined($target)) {
308: return { title => $title,
309: symb => $symb,
310: src => $src,
1.25 matthew 311: id => $seq_id,
1.21 matthew 312: html => $target, };
313: }
314: return undef;
315: }
316: };
317: }
318:
319: sub get_selected_symbs {
320: my ($inputfield) = @_;
321: my $field = 'form.'.$inputfield;
322: my @Symbs;
323: if (exists($ENV{$field})) {
324: if (! ref($ENV{$field})) {
325: @Symbs = (&Apache::lonnet::unescape($ENV{$field}));
326: } else {
327: @Symbs = (map {&Apache::lonnet::unescape($_);} @{$ENV{$field}});
328: }
329: }
330: return @Symbs;
331: }
332:
333: ####################################################
334: ####################################################
335:
336: =pod
337:
1.2 matthew 338: =item &make_target_id($target)
339:
340: Inputs: Hash ref with the following entries:
341: $target->{'symb'}, $target->{'part'}, $target->{'respid'},
342: $target->{'resptype'}.
343:
344: Returns: A string, suitable for a form parameter, which uniquely identifies
345: the problem, part, and response to do statistical analysis on.
346:
347: Used by Apache::lonstathelpers::ProblemSelector().
348:
349: =cut
350:
351: ####################################################
352: ####################################################
353: sub make_target_id {
354: my ($target) = @_;
355: my $id = &Apache::lonnet::escape($target->{'symb'}).':'.
356: &Apache::lonnet::escape($target->{'part'}).':'.
357: &Apache::lonnet::escape($target->{'respid'}).':'.
358: &Apache::lonnet::escape($target->{'resptype'});
359: return $id;
360: }
361:
362: ####################################################
363: ####################################################
364:
365: =pod
366:
367: =item &get_target_from_id($id)
368:
369: Inputs: $id, a scalar string from Apache::lonstathelpers::make_target_id().
370:
371: Returns: A hash reference, $target, containing the following keys:
372: $target->{'symb'}, $target->{'part'}, $target->{'respid'},
373: $target->{'resptype'}.
374:
375: =cut
376:
377: ####################################################
378: ####################################################
379: sub get_target_from_id {
380: my ($id) = @_;
1.21 matthew 381: if (! ref($id)) {
382: my ($symb,$part,$respid,$resptype) = split(':',$id);
383: return ({ symb => &Apache::lonnet::unescape($symb),
384: part => &Apache::lonnet::unescape($part),
385: respid => &Apache::lonnet::unescape($respid),
386: resptype => &Apache::lonnet::unescape($resptype)});
387: } elsif (ref($id) eq 'ARRAY') {
388: my @Return;
389: foreach my $selected (@$id) {
390: my ($symb,$part,$respid,$resptype) = split(':',$selected);
391: push(@Return,{ symb => &Apache::lonnet::unescape($symb),
392: part => &Apache::lonnet::unescape($part),
393: respid => &Apache::lonnet::unescape($respid),
394: resptype => &Apache::lonnet::unescape($resptype)});
395: }
396: return \@Return;
397: }
1.2 matthew 398: }
399:
400: ####################################################
401: ####################################################
402:
403: =pod
404:
1.13 matthew 405: =item &get_prev_curr_next($target,$AcceptableResponseTypes,$granularity)
1.2 matthew 406:
407: Determine the problem parts or responses preceeding and following the
408: current resource.
409:
410: Inputs: $target (see &Apache::lonstathelpers::get_target_from_id())
411: $AcceptableResponseTypes, regular expression matching acceptable
412: response types,
1.13 matthew 413: $granularity, either 'part', 'response', or 'part_survey'
1.2 matthew 414:
415: Returns: three hash references, $prev, $curr, $next, which refer to the
416: preceeding, current, or following problem parts or responses, depending
417: on the value of $granularity. Values of undef indicate there is no
418: previous or next part/response. A value of undef for all three indicates
419: there was no match found to the current part/resource.
420:
421: The hash references contain the following keys:
422: symb, part, resource
423:
424: If $granularity eq 'response', the following ADDITIONAL keys will be present:
425: respid, resptype
426:
427: =cut
428:
429: ####################################################
430: ####################################################
431: sub get_prev_curr_next {
432: my ($target,$AcceptableResponseTypes,$granularity) = @_;
433: #
434: # Build an array with the data we need to search through
435: my @Resource;
1.12 matthew 436: foreach my $seq (&Apache::lonstatistics::Sequences_with_Assess('all')) {
1.2 matthew 437: foreach my $res (@{$seq->{'contents'}}) {
438: next if ($res->{'type'} ne 'assessment');
439: foreach my $part (@{$res->{'parts'}}) {
440: my $partdata = $res->{'partdata'}->{$part};
1.20 matthew 441: if ($partdata->{'Survey'} && ($granularity eq 'part_survey')){
442: push (@Resource,
443: { symb => $res->{symb},
444: part => $part,
445: resource => $res,
446: } );
1.13 matthew 447: } elsif ($granularity eq 'part') {
1.2 matthew 448: push (@Resource,
449: { symb => $res->{symb},
450: part => $part,
451: resource => $res,
452: } );
453: } elsif ($granularity eq 'response') {
454: for (my $i=0;
455: $i<scalar(@{$partdata->{'ResponseTypes'}});
456: $i++){
457: my $respid = $partdata->{'ResponseIds'}->[$i];
458: my $resptype = $partdata->{'ResponseTypes'}->[$i];
459: next if ($resptype !~ m/$AcceptableResponseTypes/);
460: push (@Resource,
461: { symb => $res->{symb},
462: part => $part,
463: respid => $partdata->{'ResponseIds'}->[$i],
464: resource => $res,
465: resptype => $resptype
466: } );
467: }
468: }
469: }
470: }
471: }
472: #
473: # Get the index of the current situation
474: my $curr_idx;
475: for ($curr_idx=0;$curr_idx<$#Resource;$curr_idx++) {
476: my $curr_item = $Resource[$curr_idx];
1.13 matthew 477: if ($granularity eq 'part' || $granularity eq 'part_survey') {
1.2 matthew 478: if ($curr_item->{'symb'} eq $target->{'symb'} &&
479: $curr_item->{'part'} eq $target->{'part'}) {
480: last;
481: }
482: } elsif ($granularity eq 'response') {
483: if ($curr_item->{'symb'} eq $target->{'symb'} &&
484: $curr_item->{'part'} eq $target->{'part'} &&
485: $curr_item->{'respid'} eq $target->{'respid'} &&
486: $curr_item->{'resptype'} eq $target->{'resptype'}) {
487: last;
488: }
489: }
490: }
491: my $curr_item = $Resource[$curr_idx];
1.13 matthew 492: if ($granularity eq 'part' || $granularity eq 'part_survey') {
1.2 matthew 493: if ($curr_item->{'symb'} ne $target->{'symb'} ||
494: $curr_item->{'part'} ne $target->{'part'}) {
495: # bogus symb - return nothing
496: return (undef,undef,undef);
497: }
498: } elsif ($granularity eq 'response') {
499: if ($curr_item->{'symb'} ne $target->{'symb'} ||
500: $curr_item->{'part'} ne $target->{'part'} ||
501: $curr_item->{'respid'} ne $target->{'respid'} ||
502: $curr_item->{'resptype'} ne $target->{'resptype'}){
503: # bogus symb - return nothing
504: return (undef,undef,undef);
505: }
506: }
507: #
508: # Now just pick up the data we need
509: my ($prev,$curr,$next);
510: if ($curr_idx == 0) {
511: $prev = undef;
512: $curr = $Resource[$curr_idx ];
513: $next = $Resource[$curr_idx+1];
514: } elsif ($curr_idx == $#Resource) {
515: $prev = $Resource[$curr_idx-1];
516: $curr = $Resource[$curr_idx ];
517: $next = undef;
518: } else {
519: $prev = $Resource[$curr_idx-1];
520: $curr = $Resource[$curr_idx ];
521: $next = $Resource[$curr_idx+1];
522: }
523: return ($prev,$curr,$next);
1.4 matthew 524: }
525:
1.9 matthew 526:
527: #####################################################
528: #####################################################
529:
530: =pod
531:
532: =item GetStudentAnswers($r,$problem,$Students)
533:
534: Determines the correct answer for a set of students on a given problem.
535: The students answers are stored in the student hashes pointed to by the
536: array @$Students under the key 'answer'.
537:
538: Inputs: $r
539: $problem: hash reference containing the keys 'resource', 'part', and 'respid'.
540: $Students: reference to array containing student hashes (need 'username',
541: 'domain').
542:
543: Returns: nothing
544:
545: =cut
546:
547: #####################################################
548: #####################################################
549: sub GetStudentAnswers {
1.12 matthew 550: my ($r,$problem,$Students,$formname,$inputname) = @_;
1.31 matthew 551: my %answers;
1.12 matthew 552: my $status_type;
553: if (defined($formname)) {
554: $status_type = 'inline';
555: } else {
556: $status_type = 'popup';
557: }
1.9 matthew 558: my $c = $r->connection();
559: my %Answers;
560: my ($resource,$partid,$respid) = ($problem->{'resource'},
561: $problem->{'part'},
562: $problem->{'respid'});
563: # Read in the cache (if it exists) before we start timing things.
564: &Apache::lonstathelpers::ensure_proper_cache($resource->{'symb'});
565: # Open progress window
566: my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin
567: ($r,'Student Answer Compilation Status',
1.12 matthew 568: 'Student Answer Compilation Progress', scalar(@$Students),
569: $status_type,undef,$formname,$inputname);
1.9 matthew 570: $r->rflush();
571: foreach my $student (@$Students) {
572: last if ($c->aborted());
573: my $sname = $student->{'username'};
574: my $sdom = $student->{'domain'};
1.30 matthew 575: my $answer = &Apache::lonstathelpers::get_student_answer
1.9 matthew 576: ($resource,$sname,$sdom,$partid,$respid);
577: &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,
578: &mt('last student'));
1.31 matthew 579: $answers{$answer}++;
1.9 matthew 580: $student->{'answer'} = $answer;
581: }
1.29 matthew 582: &Apache::lonstathelpers::write_analysis_cache();
1.9 matthew 583: return if ($c->aborted());
584: $r->rflush();
585: # close progress window
586: &Apache::lonhtmlcommon::Close_PrgWin($r,\%prog_state);
1.31 matthew 587: return \%answers;
1.9 matthew 588: }
1.4 matthew 589:
590: #####################################################
591: #####################################################
592:
593: =pod
594:
595: =item analyze_problem_as_student
596:
1.30 matthew 597: Analyzes a homework problem for a student
1.4 matthew 598:
599: Inputs: $resource: a resource object
600: $sname, $sdom, $partid, $respid
601:
1.30 matthew 602: Returns: the problem analysis hash
1.6 matthew 603:
1.4 matthew 604: =cut
605:
606: #####################################################
607: #####################################################
608: sub analyze_problem_as_student {
1.30 matthew 609: my ($resource,$sname,$sdom) = @_;
1.22 matthew 610: if (ref($resource) ne 'HASH') {
611: my $res = $resource;
612: $resource = { 'src' => $res->src,
613: 'symb' => $res->symb,
614: 'parts' => $res->parts };
615: foreach my $part (@{$resource->{'parts'}}) {
616: $resource->{'partdata'}->{$part}->{'ResponseIds'}=
617: [$res->responseIds($part)];
618: }
619: }
1.4 matthew 620: my $url = $resource->{'src'};
621: my $symb = $resource->{'symb'};
1.29 matthew 622: my $analysis = &get_from_analysis_cache($sname,$sdom,$symb);
623: if (! defined($analysis)) {
624: my $courseid = $ENV{'request.course.id'};
625: my $Answ=&Apache::lonnet::ssi($url,('grade_target' => 'analyze',
626: 'grade_domain' => $sdom,
627: 'grade_username' => $sname,
628: 'grade_symb' => $symb,
629: 'grade_courseid' => $courseid));
630: (my $garbage,$analysis)=split(/_HASH_REF__/,$Answ,2);
631: &store_analysis($sname,$sdom,$symb,$analysis);
632: }
633: my %Answer=&Apache::lonnet::str2hash($analysis);
1.6 matthew 634: #
1.30 matthew 635: return \%Answer;
636: }
637:
638: #####################################################
639: #####################################################
640:
641: =pod
642:
643: =item get_student_answer
644:
645: Analyzes a homework problem for a particular student and returns the correct
646: answer. Attempts to put together an answer for problem types
647: that do not natively support it.
648:
649: Inputs: $resource: a resource object (from navmaps or hash from loncoursedata)
650: $sname, $sdom, $partid, $respid
651:
652: Returns: $answer
653:
654: If $partid and $respid are specified, $answer is simply a scalar containing
655: the correct answer for the response.
656:
657: If $partid or $respid are undefined, $answer will be a hash reference with
658: keys $partid.'.'.$respid.'.answer'.
659:
660: =cut
661:
662: #####################################################
663: #####################################################
664: sub get_student_answer {
665: my ($resource,$sname,$sdom,$partid,$respid) = @_;
666: #
667: if (ref($resource) ne 'HASH') {
668: my $res = $resource;
669: $resource = { 'src' => $res->src,
670: 'symb' => $res->symb,
671: 'parts' => $res->parts };
672: foreach my $part (@{$resource->{'parts'}}) {
673: $resource->{'partdata'}->{$part}->{'ResponseIds'}=
674: [$res->responseIds($part)];
675: }
676: }
677: #
678: my $analysis =
679: &analyze_problem_as_student($resource,$sname,$sdom);
1.29 matthew 680: my $answer;
1.8 matthew 681: foreach my $partid (@{$resource->{'parts'}}) {
1.6 matthew 682: my $partdata = $resource->{'partdata'}->{$partid};
683: foreach my $respid (@{$partdata->{'ResponseIds'}}) {
684: my $prefix = $partid.'.'.$respid;
685: my $key = $prefix.'.answer';
1.30 matthew 686: $answer->{$partid}->{$respid} =
687: &get_answer($prefix,$key,%$analysis);
1.6 matthew 688: }
1.8 matthew 689: }
1.30 matthew 690: my $returnvalue;
1.8 matthew 691: if (! defined($partid)) {
692: $returnvalue = $answer;
693: } elsif (! defined($respid)) {
694: $returnvalue = $answer->{$partid};
1.6 matthew 695: } else {
1.8 matthew 696: $returnvalue = $answer->{$partid}->{$respid};
1.6 matthew 697: }
698: return $returnvalue;
699: }
700:
701: sub get_answer {
702: my ($prefix,$key,%Answer) = @_;
703: my $returnvalue;
1.4 matthew 704: if (exists($Answer{$key})) {
705: my $student_answer = $Answer{$key}->[0];
706: if (! defined($student_answer)) {
707: $student_answer = $Answer{$key}->[1];
708: }
709: $returnvalue = $student_answer;
710: } else {
711: if (exists($Answer{$prefix.'.shown'})) {
712: # The response has foils
713: my %values;
714: while (my ($k,$v) = each(%Answer)) {
715: next if ($k !~ /^$prefix\.foil\.(value|area)\.(.*)$/);
716: my $foilname = $2;
717: $values{$foilname}=$v;
718: }
719: foreach my $foil (@{$Answer{$prefix.'.shown'}}) {
720: if (ref($values{$foil}) eq 'ARRAY') {
1.10 albertel 721: $returnvalue.=&HTML::Entities::encode($foil,'<>&"').'='.
722: join(',',map {&HTML::Entities::encode($_,'<>&"')} @{$values{$foil}}).'&';
1.4 matthew 723: } else {
1.10 albertel 724: $returnvalue.=&HTML::Entities::encode($foil,'<>&"').'='.
725: &HTML::Entities::encode($values{$foil},'<>&"').'&';
1.4 matthew 726: }
727: }
728: $returnvalue =~ s/ /\%20/g;
729: chop ($returnvalue);
730: }
731: }
732: return $returnvalue;
733: }
1.8 matthew 734:
735: #####################################################
736: #####################################################
737:
738: =pod
739:
740: =item Caching routines
741:
742: =over 4
743:
1.29 matthew 744: =item &load_analysis_cache($symb)
1.8 matthew 745:
746: Loads the cache for the given symb into memory from disk.
747: Requires the cache filename be set.
748: Only should be called by &ensure_proper_cache.
749:
750: =cut
751:
752: #####################################################
753: #####################################################
754: {
755: my $cache_filename = undef;
756: my $current_symb = undef;
757: my %cache;
758:
1.29 matthew 759: sub load_analysis_cache {
1.8 matthew 760: my ($symb) = @_;
761: return if (! defined($cache_filename));
762: if (! defined($current_symb) || $current_symb ne $symb) {
763: undef(%cache);
764: my $storedstring;
765: my %cache_db;
766: if (tie(%cache_db,'GDBM_File',$cache_filename,&GDBM_READER(),0640)) {
767: $storedstring = $cache_db{&Apache::lonnet::escape($symb)};
768: untie(%cache_db);
769: }
770: if (defined($storedstring)) {
771: %cache = %{thaw($storedstring)};
772: }
773: }
774: return;
775: }
776:
777: #####################################################
778: #####################################################
779:
780: =pod
781:
1.29 matthew 782: =item &get_from_analysis_cache($sname,$sdom,$symb,$partid,$respid)
1.8 matthew 783:
784: Returns the appropriate data from the cache, or undef if no data exists.
785:
786: =cut
787:
788: #####################################################
789: #####################################################
1.29 matthew 790: sub get_from_analysis_cache {
791: my ($sname,$sdom,$symb) = @_;
1.8 matthew 792: &ensure_proper_cache($symb);
793: my $returnvalue;
1.29 matthew 794: if (exists($cache{$sname.':'.$sdom})) {
795: $returnvalue = $cache{$sname.':'.$sdom};
1.8 matthew 796: } else {
797: $returnvalue = undef;
798: }
799: return $returnvalue;
800: }
801:
802: #####################################################
803: #####################################################
804:
805: =pod
806:
1.29 matthew 807: =item &write_analysis_cache($symb)
1.8 matthew 808:
809: Writes the in memory cache to disk so that it can be read in with
1.29 matthew 810: &load_analysis_cache($symb).
1.8 matthew 811:
812: =cut
813:
814: #####################################################
815: #####################################################
1.29 matthew 816: sub write_analysis_cache {
1.8 matthew 817: return if (! defined($current_symb) || ! defined($cache_filename));
818: my %cache_db;
819: my $key = &Apache::lonnet::escape($current_symb);
820: if (tie(%cache_db,'GDBM_File',$cache_filename,&GDBM_WRCREAT(),0640)) {
821: my $storestring = freeze(\%cache);
822: $cache_db{$key}=$storestring;
823: $cache_db{$key.'.time'}=time;
824: untie(%cache_db);
825: }
826: undef(%cache);
827: undef($current_symb);
828: undef($cache_filename);
829: return;
830: }
831:
832: #####################################################
833: #####################################################
834:
835: =pod
836:
837: =item &ensure_proper_cache($symb)
838:
839: Called to make sure we have the proper cache set up. This is called
1.29 matthew 840: prior to every analysis lookup.
1.8 matthew 841:
842: =cut
843:
844: #####################################################
845: #####################################################
846: sub ensure_proper_cache {
847: my ($symb) = @_;
848: my $cid = $ENV{'request.course.id'};
849: my $new_filename = '/home/httpd/perl/tmp/'.
1.29 matthew 850: 'problemanalysis_'.$cid.'_analysis_cache.db';
1.8 matthew 851: if (! defined($cache_filename) ||
852: $cache_filename ne $new_filename ||
853: ! defined($current_symb) ||
854: $current_symb ne $symb) {
855: $cache_filename = $new_filename;
856: # Notice: $current_symb is not set to $symb until after the cache is
1.29 matthew 857: # loaded. This is what tells &load_analysis_cache to load in a new
1.8 matthew 858: # symb cache.
1.29 matthew 859: &load_analysis_cache($symb);
1.8 matthew 860: $current_symb = $symb;
861: }
862: }
863:
864: #####################################################
865: #####################################################
866:
867: =pod
868:
1.29 matthew 869: =item &store_analysis($sname,$sdom,$symb,$partid,$respid,$dataset)
1.8 matthew 870:
1.29 matthew 871: Stores the analysis data in the in memory cache.
1.8 matthew 872:
873: =cut
874:
875: #####################################################
876: #####################################################
1.29 matthew 877: sub store_analysis {
878: my ($sname,$sdom,$symb,$dataset) = @_;
1.8 matthew 879: return if ($symb ne $current_symb);
1.29 matthew 880: $cache{$sname.':'.$sdom}=$dataset;
1.8 matthew 881: return;
882: }
883:
884: }
885: #####################################################
886: #####################################################
887:
888: =pod
889:
890: =back
891:
892: =cut
893:
894: #####################################################
895: #####################################################
1.4 matthew 896:
897: ##
898: ## The following is copied from datecalc1.pl, part of the
899: ## Spreadsheet::WriteExcel CPAN module.
900: ##
901: ##
902: ######################################################################
903: #
904: # Demonstration of writing date/time cells to Excel spreadsheets,
905: # using UNIX/Perl time as source of date/time.
906: #
907: # Copyright 2000, Andrew Benham, adsb@bigfoot.com
908: #
909: ######################################################################
910: #
911: # UNIX/Perl time is the time since the Epoch (00:00:00 GMT, 1 Jan 1970)
912: # measured in seconds.
913: #
914: # An Excel file can use exactly one of two different date/time systems.
915: # In these systems, a floating point number represents the number of days
916: # (and fractional parts of the day) since a start point. The floating point
917: # number is referred to as a 'serial'.
918: # The two systems ('1900' and '1904') use different starting points:
919: # '1900'; '1.00' is 1 Jan 1900 BUT 1900 is erroneously regarded as
920: # a leap year - see:
921: # http://support.microsoft.com/support/kb/articles/Q181/3/70.asp
922: # for the excuse^H^H^H^H^H^Hreason.
923: # '1904'; '1.00' is 2 Jan 1904.
924: #
925: # The '1904' system is the default for Apple Macs. Windows versions of
926: # Excel have the option to use the '1904' system.
927: #
928: # Note that Visual Basic's "DateSerial" function does NOT erroneously
929: # regard 1900 as a leap year, and thus its serials do not agree with
930: # the 1900 serials of Excel for dates before 1 Mar 1900.
931: #
932: # Note that StarOffice (at least at version 5.2) does NOT erroneously
933: # regard 1900 as a leap year, and thus its serials do not agree with
934: # the 1900 serials of Excel for dates before 1 Mar 1900.
935: #
936: ######################################################################
937: #
938: # Calculation description
939: # =======================
940: #
941: # 1900 system
942: # -----------
943: # Unix time is '0' at 00:00:00 GMT 1 Jan 1970, i.e. 70 years after 1 Jan 1900.
944: # Of those 70 years, 17 (1904,08,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68)
945: # were leap years with an extra day.
946: # Thus there were 17 + 70*365 days = 25567 days between 1 Jan 1900 and
947: # 1 Jan 1970.
948: # In the 1900 system, '1' is 1 Jan 1900, but as 1900 was not a leap year
949: # 1 Jan 1900 should really be '2', so 1 Jan 1970 is '25569'.
950: #
951: # 1904 system
952: # -----------
953: # Unix time is '0' at 00:00:00 GMT 1 Jan 1970, i.e. 66 years after 1 Jan 1904.
954: # Of those 66 years, 17 (1904,08,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68)
955: # were leap years with an extra day.
956: # Thus there were 17 + 66*365 days = 24107 days between 1 Jan 1904 and
957: # 1 Jan 1970.
958: # In the 1904 system, 2 Jan 1904 being '1', 1 Jan 1970 is '24107'.
959: #
960: ######################################################################
961: #
962: # Copyright (c) 2000, Andrew Benham.
963: # This program is free software. It may be used, redistributed and/or
964: # modified under the same terms as Perl itself.
965: #
966: # Andrew Benham, adsb@bigfoot.com
967: # London, United Kingdom
968: # 11 Nov 2000
969: #
970: ######################################################################
971: #-----------------------------------------------------------
972: # calc_serial()
973: #
974: # Called with (up to) 2 parameters.
975: # 1. Unix timestamp. If omitted, uses current time.
976: # 2. GMT flag. Set to '1' to return serial in GMT.
977: # If omitted, returns serial in appropriate timezone.
978: #
979: # Returns date/time serial according to $DATE_SYSTEM selected
980: #-----------------------------------------------------------
981: sub calc_serial {
982: # Use 1900 date system on all platforms other than Apple Mac (for which
983: # use 1904 date system).
984: my $DATE_SYSTEM = ($^O eq 'MacOS') ? 1 : 0;
985: my $time = (defined $_[0]) ? $_[0] : time();
986: my $gmtflag = (defined $_[1]) ? $_[1] : 0;
987: #
988: # Divide timestamp by number of seconds in a day.
989: # This gives a date serial with '0' on 1 Jan 1970.
990: my $serial = $time / 86400;
991: #
992: # Adjust the date serial by the offset appropriate to the
993: # currently selected system (1900/1904).
994: if ($DATE_SYSTEM == 0) { # use 1900 system
995: $serial += 25569;
996: } else { # use 1904 system
997: $serial += 24107;
998: }
999: #
1000: unless ($gmtflag) {
1001: # Now have a 'raw' serial with the right offset. But this
1002: # gives a serial in GMT, which is false unless the timezone
1003: # is GMT. We need to adjust the serial by the appropriate
1004: # timezone offset.
1005: # Calculate the appropriate timezone offset by seeing what
1006: # the differences between localtime and gmtime for the given
1007: # time are.
1008: #
1009: my @gmtime = gmtime($time);
1010: my @ltime = localtime($time);
1011: #
1012: # For the first 7 elements of the two arrays, adjust the
1013: # date serial where the elements differ.
1014: for (0 .. 6) {
1015: my $diff = $ltime[$_] - $gmtime[$_];
1016: if ($diff) {
1017: $serial += _adjustment($diff,$_);
1018: }
1019: }
1020: }
1021: #
1022: # Perpetuate the error that 1900 was a leap year by decrementing
1023: # the serial if we're using the 1900 system and the date is prior to
1024: # 1 Mar 1900. This has the effect of making serial value '60'
1025: # 29 Feb 1900.
1026: #
1027: # This fix only has any effect if UNIX/Perl time on the platform
1028: # can represent 1900. Many can't.
1029: #
1030: unless ($DATE_SYSTEM) {
1031: $serial-- if ($serial < 61); # '61' is 1 Mar 1900
1032: }
1033: return $serial;
1034: }
1035:
1036: sub _adjustment {
1037: # Based on the difference in the localtime/gmtime array elements
1038: # number, return the adjustment required to the serial.
1039: #
1040: # We only look at some elements of the localtime/gmtime arrays:
1041: # seconds unlikely to be different as all known timezones
1042: # have an offset of integral multiples of 15 minutes,
1043: # but it's easy to do.
1044: # minutes will be different for timezone offsets which are
1045: # not an exact number of hours.
1046: # hours very likely to be different.
1047: # weekday will differ when localtime/gmtime difference
1048: # straddles midnight.
1049: #
1050: # Assume that difference between localtime and gmtime is less than
1051: # 5 days, then don't have to do maths for day of month, month number,
1052: # year number, etc...
1053: #
1054: my ($delta,$element) = @_;
1055: my $adjust = 0;
1056: #
1057: if ($element == 0) { # Seconds
1058: $adjust = $delta/86400; # 60 * 60 * 24
1059: } elsif ($element == 1) { # Minutes
1060: $adjust = $delta/1440; # 60 * 24
1061: } elsif ($element == 2) { # Hours
1062: $adjust = $delta/24; # 24
1063: } elsif ($element == 6) { # Day of week number
1064: # Catch difference straddling Sat/Sun in either direction
1065: $delta += 7 if ($delta < -4);
1066: $delta -= 7 if ($delta > 4);
1067: #
1068: $adjust = $delta;
1069: }
1070: return $adjust;
1071: }
1072:
1073: ###########################################################
1074: ###########################################################
1075:
1076: =pod
1077:
1078: =item get_problem_data
1079:
1080: Returns a data structure describing the problem.
1081:
1082: Inputs: $url
1083:
1084: Returns: %Partdata
1085:
1086: =cut
1087:
1088: ## note: we must force each foil and option to not begin or end with
1089: ## spaces as they are stored without such data.
1090: ##
1091: ###########################################################
1092: ###########################################################
1093: sub get_problem_data {
1094: my ($url) = @_;
1095: my $Answ=&Apache::lonnet::ssi($url,('grade_target' => 'analyze'));
1096: (my $garbage,$Answ)=split(/_HASH_REF__/,$Answ,2);
1097: my %Answer;
1098: %Answer=&Apache::lonnet::str2hash($Answ);
1099: my %Partdata;
1100: foreach my $part (@{$Answer{'parts'}}) {
1101: while (my($key,$value) = each(%Answer)) {
1102: #
1103: # Logging code:
1.7 matthew 1104: if (0) {
1.4 matthew 1105: &Apache::lonnet::logthis($part.' got key "'.$key.'"');
1106: if (ref($value) eq 'ARRAY') {
1107: &Apache::lonnet::logthis(' @'.join(',',@$value));
1108: } else {
1109: &Apache::lonnet::logthis(' '.$value);
1110: }
1111: }
1112: # End of logging code
1113: next if ($key !~ /^$part/);
1114: $key =~ s/^$part\.//;
1115: if (ref($value) eq 'ARRAY') {
1116: if ($key eq 'options') {
1117: $Partdata{$part}->{'_Options'}=$value;
1118: } elsif ($key eq 'concepts') {
1119: $Partdata{$part}->{'_Concepts'}=$value;
1.28 matthew 1120: } elsif ($key eq 'items') {
1121: $Partdata{$part}->{'_Items'}=$value;
1.4 matthew 1122: } elsif ($key =~ /^concept\.(.*)$/) {
1123: my $concept = $1;
1124: foreach my $foil (@$value) {
1125: $Partdata{$part}->{'_Foils'}->{$foil}->{'_Concept'}=
1126: $concept;
1127: }
1.32 matthew 1128: } elsif ($key =~ /^(unit|incorrect|answer|ans_low|ans_high|str_type)$/) {
1.4 matthew 1129: $Partdata{$part}->{$key}=$value;
1130: }
1131: } else {
1132: if ($key=~ /^foil\.text\.(.*)$/) {
1133: my $foil = $1;
1134: $Partdata{$part}->{'_Foils'}->{$foil}->{'name'}=$foil;
1135: $value =~ s/(\s*$|^\s*)//g;
1136: $Partdata{$part}->{'_Foils'}->{$foil}->{'text'}=$value;
1137: } elsif ($key =~ /^foil\.value\.(.*)$/) {
1138: my $foil = $1;
1139: $Partdata{$part}->{'_Foils'}->{$foil}->{'value'}=$value;
1.28 matthew 1140: } elsif ($key eq 'answercomputed') {
1141: $Partdata{$part}->{'answercomputed'} = $value;
1.4 matthew 1142: }
1143: }
1144: }
1145: }
1.28 matthew 1146: # Further debugging code
1147: if (0) {
1148: &Apache::lonnet::logthis('lonstathelpers::get_problem_data');
1149: &log_hash_ref(\%Partdata);
1150: }
1.4 matthew 1151: return %Partdata;
1.5 matthew 1152: }
1153:
1.28 matthew 1154: sub log_array_ref {
1155: my ($arrayref,$prefix) = @_;
1156: return if (ref($arrayref) ne 'ARRAY');
1157: if (! defined($prefix)) { $prefix = ''; };
1158: foreach my $v (@$arrayref) {
1159: if (ref($v) eq 'ARRAY') {
1160: &log_array_ref($v,$prefix.' ');
1161: } elsif (ref($v) eq 'HASH') {
1162: &log_hash_ref($v,$prefix.' ');
1163: } else {
1164: &Apache::lonnet::logthis($prefix.'"'.$v.'"');
1165: }
1166: }
1167: }
1168:
1169: sub log_hash_ref {
1170: my ($hashref,$prefix) = @_;
1171: return if (ref($hashref) ne 'HASH');
1172: if (! defined($prefix)) { $prefix = ''; };
1173: while (my ($k,$v) = each(%$hashref)) {
1174: if (ref($v) eq 'ARRAY') {
1175: &Apache::lonnet::logthis($prefix.'"'.$k.'" = array');
1176: &log_array_ref($v,$prefix.' ');
1177: } elsif (ref($v) eq 'HASH') {
1178: &Apache::lonnet::logthis($prefix.'"'.$k.'" = hash');
1179: &log_hash_ref($v,$prefix.' ');
1180: } else {
1181: &Apache::lonnet::logthis($prefix.'"'.$k.'" => "'.$v.'"');
1182: }
1183: }
1184: }
1.5 matthew 1185: ####################################################
1186: ####################################################
1187:
1188: =pod
1189:
1190: =item &limit_by_time()
1191:
1192: =cut
1193:
1194: ####################################################
1195: ####################################################
1196: sub limit_by_time_form {
1197: my $Starttime_form = '';
1198: my $starttime = &Apache::lonhtmlcommon::get_date_from_form
1199: ('limitby_startdate');
1200: my $endtime = &Apache::lonhtmlcommon::get_date_from_form
1201: ('limitby_enddate');
1202: if (! defined($endtime)) {
1203: $endtime = time;
1204: }
1205: if (! defined($starttime)) {
1206: $starttime = $endtime - 60*60*24*7;
1207: }
1208: my $state;
1209: if (&limit_by_time()) {
1210: $state = '';
1211: } else {
1212: $state = 'disabled';
1213: }
1214: my $startdateform = &Apache::lonhtmlcommon::date_setter
1215: ('Statistics','limitby_startdate',$starttime,undef,undef,$state);
1216: my $enddateform = &Apache::lonhtmlcommon::date_setter
1217: ('Statistics','limitby_enddate',$endtime,undef,undef,$state);
1218: my $Str;
1219: $Str .= '<script language="Javascript" >';
1220: $Str .= 'function toggle_limitby_activity(state) {';
1221: $Str .= ' if (state) {';
1222: $Str .= ' limitby_startdate_enable();';
1223: $Str .= ' limitby_enddate_enable();';
1224: $Str .= ' } else {';
1225: $Str .= ' limitby_startdate_disable();';
1226: $Str .= ' limitby_enddate_disable();';
1227: $Str .= ' }';
1228: $Str .= '}';
1229: $Str .= '</script>';
1230: $Str .= '<fieldset>';
1231: my $timecheckbox = '<input type="checkbox" name="limit_by_time" ';
1232: if (&limit_by_time()) {
1233: $timecheckbox .= ' checked ';
1234: }
1235: $timecheckbox .= 'OnChange="javascript:toggle_limitby_activity(this.checked);" ';
1236: $timecheckbox .= ' />';
1237: $Str .= '<legend>'.&mt('[_1] Limit by time',$timecheckbox).'</legend>';
1238: $Str .= &mt('Start Time: [_1]',$startdateform).'<br />';
1239: $Str .= &mt(' End Time: [_1]',$enddateform).'<br />';
1240: $Str .= '</fieldset>';
1241: return $Str;
1242: }
1243:
1244: sub limit_by_time {
1245: if (exists($ENV{'form.limit_by_time'}) &&
1246: $ENV{'form.limit_by_time'} ne '' ) {
1247: return 1;
1248: } else {
1249: return 0;
1250: }
1251: }
1252:
1253: sub get_time_limits {
1254: my $starttime = &Apache::lonhtmlcommon::get_date_from_form
1255: ('limitby_startdate');
1256: my $endtime = &Apache::lonhtmlcommon::get_date_from_form
1257: ('limitby_enddate');
1258: return ($starttime,$endtime);
1.11 matthew 1259: }
1260:
1261:
1262:
1263: ####################################################
1264: ####################################################
1265:
1266: =pod
1267:
1268: =item sections_description
1269:
1270: Inputs: @Sections, an array of sections
1271:
1272: Returns: A text description of the sections selected.
1273:
1274: =cut
1275:
1276: ####################################################
1277: ####################################################
1278: sub sections_description {
1279: my @Sections = @_;
1280: my $sectionstring = '';
1281: if (scalar(@Sections) > 1) {
1282: if (scalar(@Sections) > 2) {
1283: my $last = pop(@Sections);
1284: $sectionstring = "Sections ".join(', ',@Sections).', and '.$last;
1285: } else {
1286: $sectionstring = "Sections ".join(' and ',@Sections);
1287: }
1288: } else {
1289: if ($Sections[0] eq 'all') {
1290: $sectionstring = "All sections";
1291: } else {
1292: $sectionstring = "Section ".$Sections[0];
1293: }
1294: }
1295: return $sectionstring;
1.2 matthew 1296: }
1297:
1298: ####################################################
1299: ####################################################
1300:
1301: =pod
1302:
1.12 matthew 1303: =item &manage_caches
1304:
1305: Inputs: $r, apache request object
1306:
1307: Returns: An array of scalars containing html for buttons.
1308:
1309: =cut
1310:
1311: ####################################################
1312: ####################################################
1313: sub manage_caches {
1.23 matthew 1314: my ($r,$formname,$inputname,$update_message) = @_;
1.12 matthew 1315: &Apache::loncoursedata::clear_internal_caches();
1.16 matthew 1316: my $sectionkey =
1317: join(',',
1318: map {
1319: &Apache::lonnet::escape($_);
1320: } sort(@Apache::lonstatistics::SelectedSections)
1321: );
1322: my $statuskey = $Apache::lonstatistics::enrollment_status;
1.12 matthew 1323: if (exists($ENV{'form.ClearCache'}) ||
1.16 matthew 1324: exists($ENV{'form.updatecaches'}) ||
1325: (exists($ENV{'form.firstrun'}) && $ENV{'form.firstrun'} ne 'no') ||
1326: (exists($ENV{'form.prevsection'}) &&
1327: $ENV{'form.prevsection'} ne $sectionkey) ||
1328: (exists($ENV{'form.prevenrollstatus'}) &&
1329: $ENV{'form.prevenrollstatus'} ne $statuskey)
1330: ) {
1.23 matthew 1331: if (defined($update_message)) {
1332: $r->print($update_message);
1333: }
1.36 matthew 1334: &gather_full_student_data($r,$formname,$inputname);
1.12 matthew 1335: }
1336: #
1.16 matthew 1337: my @Buttons =
1338: ('<input type="submit" name="ClearCache" '.
1339: 'value="'.&mt('Clear Caches').'" />',
1340: '<input type="submit" name="updatecaches" '.
1.17 matthew 1341: 'value="'.&mt('Update Caches').'" />'.
1342: &Apache::loncommon::help_open_topic('Statistics_Cache'),
1.16 matthew 1343: '<input type="hidden" name="prevsection" value="'.$sectionkey.'" />',
1344: '<input type="hidden" name="prevenrollstatus" value="'.$statuskey.'" />'
1345: );
1346: #
1.12 matthew 1347: if (! exists($ENV{'form.firstrun'})) {
1348: $r->print('<input type="hidden" name="firstrun" value="yes" />');
1349: } else {
1350: $r->print('<input type="hidden" name="firstrun" value="no" />');
1351: }
1352: #
1353: return @Buttons;
1354: }
1355:
1.36 matthew 1356: sub gather_full_student_data {
1357: my ($r,$formname,$inputname) = @_;
1358: my $status_type;
1359: if (defined($formname)) {
1360: $status_type = 'inline';
1361: } else {
1362: $status_type = 'popup';
1363: }
1364: my $c = $r->connection();
1365: #
1366: &Apache::loncoursedata::clear_internal_caches();
1367: #
1368: my @Students = @Apache::lonstatistics::Students;
1369: #
1370: # Open the progress window
1371: my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin
1372: ($r,&mt('Student Data Compilation Status'),
1373: &mt('Student Data Compilation Progress'), scalar(@Students),
1374: $status_type,undef,$formname,$inputname);
1375: #
1376: while (my $student = shift @Students) {
1377: return if ($c->aborted());
1378: my $status = &Apache::loncoursedata::ensure_current_full_data
1379: ($student->{'username'},$student->{'domain'},
1380: $ENV{'request.course.id'});
1381: &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,
1382: &mt('last student'));
1383: }
1384: &Apache::lonhtmlcommon::Close_PrgWin($r,\%prog_state);
1385: $r->rflush();
1386: return;
1387: }
1.12 matthew 1388:
1389:
1390: ####################################################
1391: ####################################################
1392:
1393: =pod
1394:
1.2 matthew 1395: =back
1396:
1397: =cut
1398:
1399: ####################################################
1400: ####################################################
1.1 matthew 1401:
1402: 1;
1403:
1404: __END__
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to lonstathelpers.pm CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / loncom / interface / statistics