Annotation of loncom/interface/statistics/lonstathelpers.pm, revision 1.47
1.1 matthew 1: # The LearningOnline Network with CAPA
2: #
1.47 ! albertel 3: # $Id: lonstathelpers.pm,v 1.46 2005/04/07 06:56:24 albertel Exp $
1.1 matthew 4: #
5: # Copyright Michigan State University Board of Trustees
6: #
7: # This file is part of the LearningOnline Network with CAPA (LON-CAPA).
8: #
9: # LON-CAPA is free software; you can redistribute it and/or modify
10: # it under the terms of the GNU General Public License as published by
11: # the Free Software Foundation; either version 2 of the License, or
12: # (at your option) any later version.
13: #
14: # LON-CAPA is distributed in the hope that it will be useful,
15: # but WITHOUT ANY WARRANTY; without even the implied warranty of
16: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: # GNU General Public License for more details.
18: #
19: # You should have received a copy of the GNU General Public License
20: # along with LON-CAPA; if not, write to the Free Software
21: # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22: #
23: # /home/httpd/html/adm/gpl.txt
24: #
25: # http://www.lon-capa.org/
26: #
27: ####################################################
28: ####################################################
29:
30: =pod
31:
32: =head1 NAME
33:
34: Apache::lonstathelpers - helper routines used by statistics
35:
36: =head1 SYNOPSIS
37:
38: This module provides a place to consolidate much of the statistics
39: routines that are needed across multiple statistics functions.
40:
41: =head1 OVERVIEW
42:
43: =over 4
44:
45: =cut
46:
47: ####################################################
48: ####################################################
49: package Apache::lonstathelpers;
50:
51: use strict;
1.46 albertel 52: use Apache::lonnet;
1.1 matthew 53: use Apache::loncommon();
54: use Apache::lonhtmlcommon();
55: use Apache::loncoursedata();
56: use Apache::lonstatistics;
57: use Apache::lonlocal;
58: use HTML::Entities();
59: use Time::Local();
60: use Spreadsheet::WriteExcel();
1.8 matthew 61: use GDBM_File;
62: use Storable qw(freeze thaw);
1.1 matthew 63:
64: ####################################################
65: ####################################################
66:
67: =pod
68:
69: =item &render_resource($resource)
70:
1.42 matthew 71: Input: a navmaps resource
1.1 matthew 72:
73: Retunrs: a scalar containing html for a rendering of the problem
74: within a table.
75:
76: =cut
77:
78: ####################################################
79: ####################################################
80: sub render_resource {
81: my ($resource) = @_;
82: ##
83: ## Render the problem
1.43 matthew 84: my ($base) = ($resource->src =~ m|^(.*/)[^/]*$|);
85: $base="http://".$ENV{'SERVER_NAME'}.$base;
1.40 matthew 86: my ($src,$symb)=($resource->src,&Apache::lonnet::escape($resource->symb));
87: my $rendered_problem = &Apache::lonnet::ssi_body($src.'?symb='.$symb);
1.1 matthew 88: $rendered_problem =~ s/<\s*form\s*/<nop /g;
89: $rendered_problem =~ s|(<\s*/form\s*>)|<\/nop>|g;
90: return '<table bgcolor="ffffff"><tr><td>'.
91: '<base href="'.$base.'" />'.
92: $rendered_problem.
93: '</td></tr></table>';
94: }
1.2 matthew 95:
96: ####################################################
97: ####################################################
98:
99: =pod
100:
1.40 matthew 101: =item &get_resources
102:
103: =cut
104:
105: ####################################################
106: ####################################################
107: sub get_resources {
108: my ($navmap,$sequence) = @_;
109: my @resources = $navmap->retrieveResources($sequence,
110: sub { shift->is_problem(); },
111: 0,0,0);
112: return @resources;
113: }
114:
115: ####################################################
116: ####################################################
117:
118: =pod
119:
120: =item &problem_selector($AcceptedResponseTypes)
1.2 matthew 121:
122: Input: scalar containing regular expression which matches response
123: types to show. '.' will yield all, '(option|radiobutton)' will match
124: all option response and radiobutton problems.
125:
126: Returns: A string containing html for a table which lists the sequences
127: and their contents. A radiobutton is provided for each problem.
1.14 matthew 128: Skips 'survey' problems.
1.2 matthew 129:
130: =cut
131:
132: ####################################################
133: ####################################################
1.40 matthew 134: sub problem_selector {
1.2 matthew 135: my ($AcceptedResponseTypes) = @_;
136: my $Str;
137: $Str = "\n<table>\n";
1.27 matthew 138: my $rb_count =0;
1.40 matthew 139: my ($navmap,@sequences) =
140: &Apache::lonstatistics::selected_sequences_with_assessments('all');
141: return $navmap if (! ref($navmap)); # error
142: foreach my $seq (@sequences) {
1.2 matthew 143: my $seq_str = '';
1.40 matthew 144: foreach my $res (&get_resources($navmap,$seq)) {
145: foreach my $part (@{$res->parts}) {
146: my @response_ids = $res->responseIds($part);
147: my @response_types = $res->responseType($part);
148: for (my $i=0;$i<scalar(@response_types);$i++){
149: my $respid = $response_ids[$i];
150: my $resptype = $response_types[$i];
1.2 matthew 151: if ($resptype =~ m/$AcceptedResponseTypes/) {
1.40 matthew 152: my $value = &make_target_id({symb=>$res->symb,
1.2 matthew 153: part=>$part,
154: respid=>$respid,
155: resptype=>$resptype});
156: my $checked = '';
1.46 albertel 157: if ($env{'form.problemchoice'} eq $value) {
1.2 matthew 158: $checked = 'checked ';
159: }
1.40 matthew 160: my $title = $res->compTitle;
1.2 matthew 161: if (! defined($title) || $title eq '') {
1.40 matthew 162: ($title) = ($res->src =~ m:/([^/]*)$:);
1.2 matthew 163: }
1.27 matthew 164: $seq_str .= '<tr>'.
165: qq{<td><input type="radio" id="$rb_count" name="problemchoice" value="$value" $checked /></td>}.
166: '<td><label for="'.$rb_count.'">'.$resptype.'</label></td>'.
167: '<td><label for="'.$rb_count.'">'.$title.'</label>';
1.40 matthew 168: if (scalar(@response_ids) > 1) {
1.2 matthew 169: $seq_str .= &mt('response').' '.$respid;
170: }
1.41 matthew 171: my $link = $res->src.'?symb='.
1.40 matthew 172: &Apache::lonnet::escape($res->symb);
1.27 matthew 173: $seq_str .= (' 'x2).
1.34 matthew 174: qq{<a target="preview" href="$link">view</a>};
1.2 matthew 175: $seq_str .= "</td></tr>\n";
1.27 matthew 176: $rb_count++;
1.2 matthew 177: }
178: }
179: }
180: }
181: if ($seq_str ne '') {
1.40 matthew 182: $Str .= '<tr><td> </td><td colspan="2"><b>'.$seq->compTitle.'</b></td>'.
1.2 matthew 183: "</tr>\n".$seq_str;
184: }
185: }
186: $Str .= "</table>\n";
187: return $Str;
188: }
189:
190: ####################################################
191: ####################################################
192:
193: =pod
194:
1.24 matthew 195: =item &MultipleProblemSelector($navmap,$selected,$inputname)
1.21 matthew 196:
197: Generate HTML with checkboxes for problem selection.
198:
199: Input:
200:
201: $navmap: a navmap object. If undef, navmaps will be called to create a
202: new object.
203:
204: $selected: Scalar, Array, or hash reference of currently selected items.
205:
206: $inputname: The name of the form elements to use for the checkboxs.
207:
208: Returns: A string containing html for a table which lists the sequences
209: and their contents. A checkbox is provided for each problem.
210:
211: =cut
212:
213: ####################################################
214: ####################################################
215: sub MultipleProblemSelector {
1.23 matthew 216: my ($navmap,$inputname,$formname)=@_;
1.46 albertel 217: my $cid = $env{'request.course.id'};
1.21 matthew 218: my $Str;
219: # Massage the input as needed.
220: if (! defined($navmap)) {
221: $navmap = Apache::lonnavmaps::navmap->new();
222: if (! defined($navmap)) {
223: $Str .=
224: '<h1>'.&mt('Error: cannot process course structure').'</h1>';
225: return $Str;
226: }
227: }
228: my $selected = {map { ($_,1) } (&get_selected_symbs($inputname))};
229: # Header
230: $Str .= <<"END";
1.25 matthew 231: <script language="JavaScript" type="text/javascript">
232: function checkall(value,seqid) {
1.21 matthew 233: for (i=0; i<document.forms.$formname.elements.length; i++) {
234: ele = document.forms.$formname.elements[i];
235: if (ele.name == '$inputname') {
1.25 matthew 236: if (seqid != null) {
237: itemid = document.forms.$formname.elements[i].id;
238: thing = itemid.split(':');
239: if (thing[0] == seqid) {
240: document.forms.$formname.elements[i].checked=value;
241: }
242: } else {
243: document.forms.$formname.elements[i].checked=value;
244: }
1.21 matthew 245: }
246: }
247: }
248: </script>
249: END
250: $Str .=
251: '<a href="javascript:checkall(true)">'.&mt('Select All').'</a>'.
252: (' 'x4).
253: '<a href="javascript:checkall(false)">'.&mt('Unselect All').'</a>';
254: $Str .= $/.'<table>'.$/;
255: my $iterator = $navmap->getIterator(undef, undef, undef, 1);
256: my $sequence_string;
1.25 matthew 257: my $seq_id = 0;
1.46 albertel 258: my @Accumulator = (&new_accumulator($env{'course.'.$cid.'.description'},
1.21 matthew 259: '',
260: '',
1.25 matthew 261: $seq_id++,
1.21 matthew 262: $inputname));
263: my @Sequence_Data;
264: while (my $curRes = $iterator->next()) {
265: if ($curRes == $iterator->END_MAP) {
266: if (ref($Accumulator[-1]) eq 'CODE') {
1.24 matthew 267: my $old_accumulator = pop(@Accumulator);
268: push(@Sequence_Data,&{$old_accumulator}());
1.21 matthew 269: }
270: } elsif ($curRes == $iterator->BEGIN_MAP) {
271: # Not much to do here.
272: }
273: next if (! ref($curRes));
274: if ($curRes->is_map) {
1.24 matthew 275: push(@Accumulator,&new_accumulator($curRes->compTitle,
1.21 matthew 276: $curRes->src,
277: $curRes->symb,
1.25 matthew 278: $seq_id++,
1.21 matthew 279: $inputname));
280: } elsif ($curRes->is_problem) {
281: if (@Accumulator && $Accumulator[-1] ne '') {
282: &{$Accumulator[-1]}($curRes,
283: exists($selected->{$curRes->symb}));
284: }
285: }
286: }
287: my $course_seq = pop(@Sequence_Data);
288: foreach my $seq ($course_seq,@Sequence_Data) {
289: #my $seq = pop(@Sequence_Data);
290: next if (! defined($seq) || ref($seq) ne 'HASH');
291: $Str.= '<tr><td colspan="2">'.
1.25 matthew 292: '<b>'.$seq->{'title'}.'</b>'.(' 'x2).
293: '<a href="javascript:checkall(true,'.$seq->{'id'}.')">'.
294: &mt('Select').'</a>'.(' 'x2).
295: '<a href="javascript:checkall(false,'.$seq->{'id'}.')">'.
296: &mt('Unselect').'</a>'.(' 'x2).
1.21 matthew 297: '</td></tr>'.$/;
298: $Str.= $seq->{'html'};
299: }
300: $Str .= '</table>'.$/;
301: return $Str;
302: }
303:
304: sub new_accumulator {
1.25 matthew 305: my ($title,$src,$symb,$seq_id,$inputname) = @_;
1.21 matthew 306: my $target;
1.25 matthew 307: my $item_id=0;
1.21 matthew 308: return
309: sub {
310: if (@_) {
311: my ($res,$checked) = @_;
1.23 matthew 312: $target.='<tr><td><label>'.
1.21 matthew 313: '<input type="checkbox" name="'.$inputname.'" ';
314: if ($checked) {
315: $target .= 'checked ';
316: }
1.25 matthew 317: $target .= 'id="'.$seq_id.':'.$item_id++.'" ';
1.21 matthew 318: $target.=
319: 'value="'.&Apache::lonnet::escape($res->symb).'" />'.
1.26 matthew 320: ' '.$res->compTitle.'</label>'.
321: (' 'x2).'<a target="preview" '.
1.34 matthew 322: 'href="'.$res->src.'?symb='.
1.39 matthew 323: &Apache::lonnet::escape($res->symb).'">view</a>'.
1.26 matthew 324: '</td></tr>'.$/;
1.21 matthew 325: } else {
326: if (defined($target)) {
327: return { title => $title,
328: symb => $symb,
329: src => $src,
1.25 matthew 330: id => $seq_id,
1.21 matthew 331: html => $target, };
332: }
333: return undef;
334: }
335: };
336: }
337:
338: sub get_selected_symbs {
339: my ($inputfield) = @_;
340: my $field = 'form.'.$inputfield;
1.47 ! albertel 341: my @Symbs = &Apache::loncommon::get_env_multiple($field);
! 342: @Symbs = (map {&Apache::lonnet::unescape($_);} @{$env{$field}});
1.21 matthew 343: return @Symbs;
344: }
345:
346: ####################################################
347: ####################################################
348:
349: =pod
350:
1.2 matthew 351: =item &make_target_id($target)
352:
353: Inputs: Hash ref with the following entries:
354: $target->{'symb'}, $target->{'part'}, $target->{'respid'},
355: $target->{'resptype'}.
356:
357: Returns: A string, suitable for a form parameter, which uniquely identifies
358: the problem, part, and response to do statistical analysis on.
359:
360: Used by Apache::lonstathelpers::ProblemSelector().
361:
362: =cut
363:
364: ####################################################
365: ####################################################
366: sub make_target_id {
367: my ($target) = @_;
368: my $id = &Apache::lonnet::escape($target->{'symb'}).':'.
369: &Apache::lonnet::escape($target->{'part'}).':'.
370: &Apache::lonnet::escape($target->{'respid'}).':'.
371: &Apache::lonnet::escape($target->{'resptype'});
372: return $id;
373: }
374:
375: ####################################################
376: ####################################################
377:
378: =pod
379:
380: =item &get_target_from_id($id)
381:
382: Inputs: $id, a scalar string from Apache::lonstathelpers::make_target_id().
383:
384: Returns: A hash reference, $target, containing the following keys:
385: $target->{'symb'}, $target->{'part'}, $target->{'respid'},
386: $target->{'resptype'}.
387:
388: =cut
389:
390: ####################################################
391: ####################################################
392: sub get_target_from_id {
393: my ($id) = @_;
1.21 matthew 394: if (! ref($id)) {
395: my ($symb,$part,$respid,$resptype) = split(':',$id);
396: return ({ symb => &Apache::lonnet::unescape($symb),
397: part => &Apache::lonnet::unescape($part),
398: respid => &Apache::lonnet::unescape($respid),
399: resptype => &Apache::lonnet::unescape($resptype)});
400: } elsif (ref($id) eq 'ARRAY') {
401: my @Return;
402: foreach my $selected (@$id) {
403: my ($symb,$part,$respid,$resptype) = split(':',$selected);
404: push(@Return,{ symb => &Apache::lonnet::unescape($symb),
405: part => &Apache::lonnet::unescape($part),
406: respid => &Apache::lonnet::unescape($respid),
407: resptype => &Apache::lonnet::unescape($resptype)});
408: }
409: return \@Return;
410: }
1.2 matthew 411: }
412:
413: ####################################################
414: ####################################################
415:
416: =pod
417:
1.13 matthew 418: =item &get_prev_curr_next($target,$AcceptableResponseTypes,$granularity)
1.2 matthew 419:
420: Determine the problem parts or responses preceeding and following the
421: current resource.
422:
423: Inputs: $target (see &Apache::lonstathelpers::get_target_from_id())
424: $AcceptableResponseTypes, regular expression matching acceptable
425: response types,
1.13 matthew 426: $granularity, either 'part', 'response', or 'part_survey'
1.2 matthew 427:
428: Returns: three hash references, $prev, $curr, $next, which refer to the
429: preceeding, current, or following problem parts or responses, depending
430: on the value of $granularity. Values of undef indicate there is no
431: previous or next part/response. A value of undef for all three indicates
432: there was no match found to the current part/resource.
433:
434: The hash references contain the following keys:
435: symb, part, resource
436:
437: If $granularity eq 'response', the following ADDITIONAL keys will be present:
438: respid, resptype
439:
440: =cut
441:
442: ####################################################
443: ####################################################
444: sub get_prev_curr_next {
445: my ($target,$AcceptableResponseTypes,$granularity) = @_;
446: #
447: # Build an array with the data we need to search through
448: my @Resource;
1.40 matthew 449: my ($navmap,@sequences) =
450: &Apache::lonstatistics::selected_sequences_with_assessments('all');
451: return $navmap if (! ref($navmap));
452: foreach my $seq (@sequences) {
453: my @resources = &get_resources($navmap,$seq);
454: foreach my $res (@resources) {
455: foreach my $part (@{$res->parts}) {
456: if ($res->is_survey($part) && ($granularity eq 'part_survey')){
1.20 matthew 457: push (@Resource,
1.40 matthew 458: { symb => $res->symb,
1.20 matthew 459: part => $part,
460: resource => $res,
461: } );
1.13 matthew 462: } elsif ($granularity eq 'part') {
1.2 matthew 463: push (@Resource,
1.40 matthew 464: { symb => $res->symb,
1.2 matthew 465: part => $part,
466: resource => $res,
467: } );
468: } elsif ($granularity eq 'response') {
1.40 matthew 469: my @response_ids = $res->responseIds($part);
470: my @response_types = $res->responseType($part);
1.2 matthew 471: for (my $i=0;
1.40 matthew 472: $i<scalar(@response_ids);
1.2 matthew 473: $i++){
1.40 matthew 474: my $respid = $response_ids[$i];
475: my $resptype = $response_types[$i];
1.2 matthew 476: next if ($resptype !~ m/$AcceptableResponseTypes/);
477: push (@Resource,
1.40 matthew 478: { symb => $res->symb,
1.2 matthew 479: part => $part,
1.40 matthew 480: respid => $respid,
481: resptype => $resptype,
1.2 matthew 482: resource => $res,
483: } );
484: }
485: }
486: }
487: }
488: }
489: #
490: # Get the index of the current situation
491: my $curr_idx;
492: for ($curr_idx=0;$curr_idx<$#Resource;$curr_idx++) {
493: my $curr_item = $Resource[$curr_idx];
1.13 matthew 494: if ($granularity eq 'part' || $granularity eq 'part_survey') {
1.2 matthew 495: if ($curr_item->{'symb'} eq $target->{'symb'} &&
496: $curr_item->{'part'} eq $target->{'part'}) {
497: last;
498: }
499: } elsif ($granularity eq 'response') {
500: if ($curr_item->{'symb'} eq $target->{'symb'} &&
501: $curr_item->{'part'} eq $target->{'part'} &&
502: $curr_item->{'respid'} eq $target->{'respid'} &&
503: $curr_item->{'resptype'} eq $target->{'resptype'}) {
504: last;
505: }
506: }
507: }
508: my $curr_item = $Resource[$curr_idx];
1.13 matthew 509: if ($granularity eq 'part' || $granularity eq 'part_survey') {
1.2 matthew 510: if ($curr_item->{'symb'} ne $target->{'symb'} ||
511: $curr_item->{'part'} ne $target->{'part'}) {
512: # bogus symb - return nothing
513: return (undef,undef,undef);
514: }
515: } elsif ($granularity eq 'response') {
516: if ($curr_item->{'symb'} ne $target->{'symb'} ||
517: $curr_item->{'part'} ne $target->{'part'} ||
518: $curr_item->{'respid'} ne $target->{'respid'} ||
519: $curr_item->{'resptype'} ne $target->{'resptype'}){
520: # bogus symb - return nothing
521: return (undef,undef,undef);
522: }
523: }
524: #
525: # Now just pick up the data we need
526: my ($prev,$curr,$next);
527: if ($curr_idx == 0) {
528: $prev = undef;
529: $curr = $Resource[$curr_idx ];
530: $next = $Resource[$curr_idx+1];
531: } elsif ($curr_idx == $#Resource) {
532: $prev = $Resource[$curr_idx-1];
533: $curr = $Resource[$curr_idx ];
534: $next = undef;
535: } else {
536: $prev = $Resource[$curr_idx-1];
537: $curr = $Resource[$curr_idx ];
538: $next = $Resource[$curr_idx+1];
539: }
1.40 matthew 540: return ($navmap,$prev,$curr,$next);
1.4 matthew 541: }
542:
1.9 matthew 543:
544: #####################################################
545: #####################################################
546:
547: =pod
548:
549: =item GetStudentAnswers($r,$problem,$Students)
550:
551: Determines the correct answer for a set of students on a given problem.
552: The students answers are stored in the student hashes pointed to by the
553: array @$Students under the key 'answer'.
554:
555: Inputs: $r
556: $problem: hash reference containing the keys 'resource', 'part', and 'respid'.
557: $Students: reference to array containing student hashes (need 'username',
558: 'domain').
559:
560: Returns: nothing
561:
562: =cut
563:
564: #####################################################
565: #####################################################
566: sub GetStudentAnswers {
1.12 matthew 567: my ($r,$problem,$Students,$formname,$inputname) = @_;
1.31 matthew 568: my %answers;
1.12 matthew 569: my $status_type;
570: if (defined($formname)) {
571: $status_type = 'inline';
572: } else {
573: $status_type = 'popup';
574: }
1.9 matthew 575: my $c = $r->connection();
576: my %Answers;
577: my ($resource,$partid,$respid) = ($problem->{'resource'},
578: $problem->{'part'},
579: $problem->{'respid'});
580: # Read in the cache (if it exists) before we start timing things.
581: &Apache::lonstathelpers::ensure_proper_cache($resource->{'symb'});
582: # Open progress window
583: my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin
584: ($r,'Student Answer Compilation Status',
1.12 matthew 585: 'Student Answer Compilation Progress', scalar(@$Students),
586: $status_type,undef,$formname,$inputname);
1.9 matthew 587: $r->rflush();
588: foreach my $student (@$Students) {
589: last if ($c->aborted());
590: my $sname = $student->{'username'};
591: my $sdom = $student->{'domain'};
1.30 matthew 592: my $answer = &Apache::lonstathelpers::get_student_answer
1.9 matthew 593: ($resource,$sname,$sdom,$partid,$respid);
594: &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,
595: &mt('last student'));
1.31 matthew 596: $answers{$answer}++;
1.9 matthew 597: $student->{'answer'} = $answer;
598: }
1.29 matthew 599: &Apache::lonstathelpers::write_analysis_cache();
1.9 matthew 600: return if ($c->aborted());
601: $r->rflush();
602: # close progress window
603: &Apache::lonhtmlcommon::Close_PrgWin($r,\%prog_state);
1.31 matthew 604: return \%answers;
1.9 matthew 605: }
1.4 matthew 606:
607: #####################################################
608: #####################################################
609:
610: =pod
611:
612: =item analyze_problem_as_student
613:
1.30 matthew 614: Analyzes a homework problem for a student
1.4 matthew 615:
616: Inputs: $resource: a resource object
617: $sname, $sdom, $partid, $respid
618:
1.30 matthew 619: Returns: the problem analysis hash
1.6 matthew 620:
1.4 matthew 621: =cut
622:
623: #####################################################
624: #####################################################
625: sub analyze_problem_as_student {
1.30 matthew 626: my ($resource,$sname,$sdom) = @_;
1.22 matthew 627: if (ref($resource) ne 'HASH') {
628: my $res = $resource;
629: $resource = { 'src' => $res->src,
630: 'symb' => $res->symb,
631: 'parts' => $res->parts };
632: foreach my $part (@{$resource->{'parts'}}) {
633: $resource->{'partdata'}->{$part}->{'ResponseIds'}=
634: [$res->responseIds($part)];
635: }
636: }
1.4 matthew 637: my $url = $resource->{'src'};
638: my $symb = $resource->{'symb'};
1.29 matthew 639: my $analysis = &get_from_analysis_cache($sname,$sdom,$symb);
640: if (! defined($analysis)) {
1.46 albertel 641: my $courseid = $env{'request.course.id'};
1.29 matthew 642: my $Answ=&Apache::lonnet::ssi($url,('grade_target' => 'analyze',
643: 'grade_domain' => $sdom,
644: 'grade_username' => $sname,
645: 'grade_symb' => $symb,
646: 'grade_courseid' => $courseid));
647: (my $garbage,$analysis)=split(/_HASH_REF__/,$Answ,2);
648: &store_analysis($sname,$sdom,$symb,$analysis);
649: }
650: my %Answer=&Apache::lonnet::str2hash($analysis);
1.6 matthew 651: #
1.30 matthew 652: return \%Answer;
653: }
654:
655: #####################################################
656: #####################################################
657:
658: =pod
659:
660: =item get_student_answer
661:
662: Analyzes a homework problem for a particular student and returns the correct
663: answer. Attempts to put together an answer for problem types
664: that do not natively support it.
665:
666: Inputs: $resource: a resource object (from navmaps or hash from loncoursedata)
667: $sname, $sdom, $partid, $respid
668:
669: Returns: $answer
670:
671: If $partid and $respid are specified, $answer is simply a scalar containing
672: the correct answer for the response.
673:
674: If $partid or $respid are undefined, $answer will be a hash reference with
675: keys $partid.'.'.$respid.'.answer'.
676:
677: =cut
678:
679: #####################################################
680: #####################################################
681: sub get_student_answer {
682: my ($resource,$sname,$sdom,$partid,$respid) = @_;
683: #
684: if (ref($resource) ne 'HASH') {
685: my $res = $resource;
686: $resource = { 'src' => $res->src,
687: 'symb' => $res->symb,
688: 'parts' => $res->parts };
689: foreach my $part (@{$resource->{'parts'}}) {
690: $resource->{'partdata'}->{$part}->{'ResponseIds'}=
691: [$res->responseIds($part)];
692: }
693: }
694: #
695: my $analysis =
696: &analyze_problem_as_student($resource,$sname,$sdom);
1.29 matthew 697: my $answer;
1.8 matthew 698: foreach my $partid (@{$resource->{'parts'}}) {
1.6 matthew 699: my $partdata = $resource->{'partdata'}->{$partid};
700: foreach my $respid (@{$partdata->{'ResponseIds'}}) {
701: my $prefix = $partid.'.'.$respid;
702: my $key = $prefix.'.answer';
1.30 matthew 703: $answer->{$partid}->{$respid} =
704: &get_answer($prefix,$key,%$analysis);
1.6 matthew 705: }
1.8 matthew 706: }
1.30 matthew 707: my $returnvalue;
1.8 matthew 708: if (! defined($partid)) {
709: $returnvalue = $answer;
710: } elsif (! defined($respid)) {
711: $returnvalue = $answer->{$partid};
1.6 matthew 712: } else {
1.8 matthew 713: $returnvalue = $answer->{$partid}->{$respid};
1.6 matthew 714: }
715: return $returnvalue;
716: }
717:
718: sub get_answer {
719: my ($prefix,$key,%Answer) = @_;
720: my $returnvalue;
1.4 matthew 721: if (exists($Answer{$key})) {
722: my $student_answer = $Answer{$key}->[0];
723: if (! defined($student_answer)) {
724: $student_answer = $Answer{$key}->[1];
725: }
726: $returnvalue = $student_answer;
727: } else {
728: if (exists($Answer{$prefix.'.shown'})) {
729: # The response has foils
730: my %values;
731: while (my ($k,$v) = each(%Answer)) {
732: next if ($k !~ /^$prefix\.foil\.(value|area)\.(.*)$/);
733: my $foilname = $2;
734: $values{$foilname}=$v;
735: }
736: foreach my $foil (@{$Answer{$prefix.'.shown'}}) {
737: if (ref($values{$foil}) eq 'ARRAY') {
1.10 albertel 738: $returnvalue.=&HTML::Entities::encode($foil,'<>&"').'='.
739: join(',',map {&HTML::Entities::encode($_,'<>&"')} @{$values{$foil}}).'&';
1.4 matthew 740: } else {
1.10 albertel 741: $returnvalue.=&HTML::Entities::encode($foil,'<>&"').'='.
742: &HTML::Entities::encode($values{$foil},'<>&"').'&';
1.4 matthew 743: }
744: }
745: $returnvalue =~ s/ /\%20/g;
746: chop ($returnvalue);
747: }
748: }
749: return $returnvalue;
750: }
1.8 matthew 751:
752: #####################################################
753: #####################################################
754:
755: =pod
756:
757: =item Caching routines
758:
759: =over 4
760:
1.29 matthew 761: =item &load_analysis_cache($symb)
1.8 matthew 762:
763: Loads the cache for the given symb into memory from disk.
764: Requires the cache filename be set.
765: Only should be called by &ensure_proper_cache.
766:
767: =cut
768:
769: #####################################################
770: #####################################################
771: {
772: my $cache_filename = undef;
773: my $current_symb = undef;
774: my %cache;
775:
1.29 matthew 776: sub load_analysis_cache {
1.8 matthew 777: my ($symb) = @_;
778: return if (! defined($cache_filename));
779: if (! defined($current_symb) || $current_symb ne $symb) {
780: undef(%cache);
781: my $storedstring;
782: my %cache_db;
783: if (tie(%cache_db,'GDBM_File',$cache_filename,&GDBM_READER(),0640)) {
784: $storedstring = $cache_db{&Apache::lonnet::escape($symb)};
785: untie(%cache_db);
786: }
787: if (defined($storedstring)) {
788: %cache = %{thaw($storedstring)};
789: }
790: }
791: return;
792: }
793:
794: #####################################################
795: #####################################################
796:
797: =pod
798:
1.29 matthew 799: =item &get_from_analysis_cache($sname,$sdom,$symb,$partid,$respid)
1.8 matthew 800:
801: Returns the appropriate data from the cache, or undef if no data exists.
802:
803: =cut
804:
805: #####################################################
806: #####################################################
1.29 matthew 807: sub get_from_analysis_cache {
808: my ($sname,$sdom,$symb) = @_;
1.8 matthew 809: &ensure_proper_cache($symb);
810: my $returnvalue;
1.29 matthew 811: if (exists($cache{$sname.':'.$sdom})) {
812: $returnvalue = $cache{$sname.':'.$sdom};
1.8 matthew 813: } else {
814: $returnvalue = undef;
815: }
816: return $returnvalue;
817: }
818:
819: #####################################################
820: #####################################################
821:
822: =pod
823:
1.29 matthew 824: =item &write_analysis_cache($symb)
1.8 matthew 825:
826: Writes the in memory cache to disk so that it can be read in with
1.29 matthew 827: &load_analysis_cache($symb).
1.8 matthew 828:
829: =cut
830:
831: #####################################################
832: #####################################################
1.29 matthew 833: sub write_analysis_cache {
1.8 matthew 834: return if (! defined($current_symb) || ! defined($cache_filename));
835: my %cache_db;
836: my $key = &Apache::lonnet::escape($current_symb);
837: if (tie(%cache_db,'GDBM_File',$cache_filename,&GDBM_WRCREAT(),0640)) {
838: my $storestring = freeze(\%cache);
839: $cache_db{$key}=$storestring;
840: $cache_db{$key.'.time'}=time;
841: untie(%cache_db);
842: }
843: undef(%cache);
844: undef($current_symb);
845: undef($cache_filename);
846: return;
847: }
848:
849: #####################################################
850: #####################################################
851:
852: =pod
853:
854: =item &ensure_proper_cache($symb)
855:
856: Called to make sure we have the proper cache set up. This is called
1.29 matthew 857: prior to every analysis lookup.
1.8 matthew 858:
859: =cut
860:
861: #####################################################
862: #####################################################
863: sub ensure_proper_cache {
864: my ($symb) = @_;
1.46 albertel 865: my $cid = $env{'request.course.id'};
1.8 matthew 866: my $new_filename = '/home/httpd/perl/tmp/'.
1.29 matthew 867: 'problemanalysis_'.$cid.'_analysis_cache.db';
1.8 matthew 868: if (! defined($cache_filename) ||
869: $cache_filename ne $new_filename ||
870: ! defined($current_symb) ||
871: $current_symb ne $symb) {
872: $cache_filename = $new_filename;
873: # Notice: $current_symb is not set to $symb until after the cache is
1.29 matthew 874: # loaded. This is what tells &load_analysis_cache to load in a new
1.8 matthew 875: # symb cache.
1.29 matthew 876: &load_analysis_cache($symb);
1.8 matthew 877: $current_symb = $symb;
878: }
879: }
880:
881: #####################################################
882: #####################################################
883:
884: =pod
885:
1.29 matthew 886: =item &store_analysis($sname,$sdom,$symb,$partid,$respid,$dataset)
1.8 matthew 887:
1.29 matthew 888: Stores the analysis data in the in memory cache.
1.8 matthew 889:
890: =cut
891:
892: #####################################################
893: #####################################################
1.29 matthew 894: sub store_analysis {
895: my ($sname,$sdom,$symb,$dataset) = @_;
1.8 matthew 896: return if ($symb ne $current_symb);
1.29 matthew 897: $cache{$sname.':'.$sdom}=$dataset;
1.8 matthew 898: return;
899: }
900:
901: }
902: #####################################################
903: #####################################################
904:
905: =pod
906:
907: =back
908:
909: =cut
910:
911: #####################################################
912: #####################################################
1.4 matthew 913:
914: ##
915: ## The following is copied from datecalc1.pl, part of the
916: ## Spreadsheet::WriteExcel CPAN module.
917: ##
918: ##
919: ######################################################################
920: #
921: # Demonstration of writing date/time cells to Excel spreadsheets,
922: # using UNIX/Perl time as source of date/time.
923: #
924: # Copyright 2000, Andrew Benham, adsb@bigfoot.com
925: #
926: ######################################################################
927: #
928: # UNIX/Perl time is the time since the Epoch (00:00:00 GMT, 1 Jan 1970)
929: # measured in seconds.
930: #
931: # An Excel file can use exactly one of two different date/time systems.
932: # In these systems, a floating point number represents the number of days
933: # (and fractional parts of the day) since a start point. The floating point
934: # number is referred to as a 'serial'.
935: # The two systems ('1900' and '1904') use different starting points:
936: # '1900'; '1.00' is 1 Jan 1900 BUT 1900 is erroneously regarded as
937: # a leap year - see:
938: # http://support.microsoft.com/support/kb/articles/Q181/3/70.asp
939: # for the excuse^H^H^H^H^H^Hreason.
940: # '1904'; '1.00' is 2 Jan 1904.
941: #
942: # The '1904' system is the default for Apple Macs. Windows versions of
943: # Excel have the option to use the '1904' system.
944: #
945: # Note that Visual Basic's "DateSerial" function does NOT erroneously
946: # regard 1900 as a leap year, and thus its serials do not agree with
947: # the 1900 serials of Excel for dates before 1 Mar 1900.
948: #
949: # Note that StarOffice (at least at version 5.2) does NOT erroneously
950: # regard 1900 as a leap year, and thus its serials do not agree with
951: # the 1900 serials of Excel for dates before 1 Mar 1900.
952: #
953: ######################################################################
954: #
955: # Calculation description
956: # =======================
957: #
958: # 1900 system
959: # -----------
960: # Unix time is '0' at 00:00:00 GMT 1 Jan 1970, i.e. 70 years after 1 Jan 1900.
961: # Of those 70 years, 17 (1904,08,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68)
962: # were leap years with an extra day.
963: # Thus there were 17 + 70*365 days = 25567 days between 1 Jan 1900 and
964: # 1 Jan 1970.
965: # In the 1900 system, '1' is 1 Jan 1900, but as 1900 was not a leap year
966: # 1 Jan 1900 should really be '2', so 1 Jan 1970 is '25569'.
967: #
968: # 1904 system
969: # -----------
970: # Unix time is '0' at 00:00:00 GMT 1 Jan 1970, i.e. 66 years after 1 Jan 1904.
971: # Of those 66 years, 17 (1904,08,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68)
972: # were leap years with an extra day.
973: # Thus there were 17 + 66*365 days = 24107 days between 1 Jan 1904 and
974: # 1 Jan 1970.
975: # In the 1904 system, 2 Jan 1904 being '1', 1 Jan 1970 is '24107'.
976: #
977: ######################################################################
978: #
979: # Copyright (c) 2000, Andrew Benham.
980: # This program is free software. It may be used, redistributed and/or
981: # modified under the same terms as Perl itself.
982: #
983: # Andrew Benham, adsb@bigfoot.com
984: # London, United Kingdom
985: # 11 Nov 2000
986: #
987: ######################################################################
988: #-----------------------------------------------------------
989: # calc_serial()
990: #
991: # Called with (up to) 2 parameters.
992: # 1. Unix timestamp. If omitted, uses current time.
993: # 2. GMT flag. Set to '1' to return serial in GMT.
994: # If omitted, returns serial in appropriate timezone.
995: #
996: # Returns date/time serial according to $DATE_SYSTEM selected
997: #-----------------------------------------------------------
998: sub calc_serial {
999: # Use 1900 date system on all platforms other than Apple Mac (for which
1000: # use 1904 date system).
1001: my $DATE_SYSTEM = ($^O eq 'MacOS') ? 1 : 0;
1002: my $time = (defined $_[0]) ? $_[0] : time();
1003: my $gmtflag = (defined $_[1]) ? $_[1] : 0;
1004: #
1005: # Divide timestamp by number of seconds in a day.
1006: # This gives a date serial with '0' on 1 Jan 1970.
1007: my $serial = $time / 86400;
1008: #
1009: # Adjust the date serial by the offset appropriate to the
1010: # currently selected system (1900/1904).
1011: if ($DATE_SYSTEM == 0) { # use 1900 system
1012: $serial += 25569;
1013: } else { # use 1904 system
1014: $serial += 24107;
1015: }
1016: #
1017: unless ($gmtflag) {
1018: # Now have a 'raw' serial with the right offset. But this
1019: # gives a serial in GMT, which is false unless the timezone
1020: # is GMT. We need to adjust the serial by the appropriate
1021: # timezone offset.
1022: # Calculate the appropriate timezone offset by seeing what
1023: # the differences between localtime and gmtime for the given
1024: # time are.
1025: #
1026: my @gmtime = gmtime($time);
1027: my @ltime = localtime($time);
1028: #
1029: # For the first 7 elements of the two arrays, adjust the
1030: # date serial where the elements differ.
1031: for (0 .. 6) {
1032: my $diff = $ltime[$_] - $gmtime[$_];
1033: if ($diff) {
1034: $serial += _adjustment($diff,$_);
1035: }
1036: }
1037: }
1038: #
1039: # Perpetuate the error that 1900 was a leap year by decrementing
1040: # the serial if we're using the 1900 system and the date is prior to
1041: # 1 Mar 1900. This has the effect of making serial value '60'
1042: # 29 Feb 1900.
1043: #
1044: # This fix only has any effect if UNIX/Perl time on the platform
1045: # can represent 1900. Many can't.
1046: #
1047: unless ($DATE_SYSTEM) {
1048: $serial-- if ($serial < 61); # '61' is 1 Mar 1900
1049: }
1050: return $serial;
1051: }
1052:
1053: sub _adjustment {
1054: # Based on the difference in the localtime/gmtime array elements
1055: # number, return the adjustment required to the serial.
1056: #
1057: # We only look at some elements of the localtime/gmtime arrays:
1058: # seconds unlikely to be different as all known timezones
1059: # have an offset of integral multiples of 15 minutes,
1060: # but it's easy to do.
1061: # minutes will be different for timezone offsets which are
1062: # not an exact number of hours.
1063: # hours very likely to be different.
1064: # weekday will differ when localtime/gmtime difference
1065: # straddles midnight.
1066: #
1067: # Assume that difference between localtime and gmtime is less than
1068: # 5 days, then don't have to do maths for day of month, month number,
1069: # year number, etc...
1070: #
1071: my ($delta,$element) = @_;
1072: my $adjust = 0;
1073: #
1074: if ($element == 0) { # Seconds
1075: $adjust = $delta/86400; # 60 * 60 * 24
1076: } elsif ($element == 1) { # Minutes
1077: $adjust = $delta/1440; # 60 * 24
1078: } elsif ($element == 2) { # Hours
1079: $adjust = $delta/24; # 24
1080: } elsif ($element == 6) { # Day of week number
1081: # Catch difference straddling Sat/Sun in either direction
1082: $delta += 7 if ($delta < -4);
1083: $delta -= 7 if ($delta > 4);
1084: #
1085: $adjust = $delta;
1086: }
1087: return $adjust;
1088: }
1089:
1090: ###########################################################
1091: ###########################################################
1092:
1093: =pod
1094:
1095: =item get_problem_data
1096:
1097: Returns a data structure describing the problem.
1098:
1099: Inputs: $url
1100:
1101: Returns: %Partdata
1102:
1103: =cut
1104:
1105: ## note: we must force each foil and option to not begin or end with
1106: ## spaces as they are stored without such data.
1107: ##
1108: ###########################################################
1109: ###########################################################
1110: sub get_problem_data {
1111: my ($url) = @_;
1112: my $Answ=&Apache::lonnet::ssi($url,('grade_target' => 'analyze'));
1113: (my $garbage,$Answ)=split(/_HASH_REF__/,$Answ,2);
1114: my %Answer;
1115: %Answer=&Apache::lonnet::str2hash($Answ);
1116: my %Partdata;
1117: foreach my $part (@{$Answer{'parts'}}) {
1118: while (my($key,$value) = each(%Answer)) {
1119: #
1120: # Logging code:
1.7 matthew 1121: if (0) {
1.4 matthew 1122: &Apache::lonnet::logthis($part.' got key "'.$key.'"');
1123: if (ref($value) eq 'ARRAY') {
1124: &Apache::lonnet::logthis(' @'.join(',',@$value));
1125: } else {
1126: &Apache::lonnet::logthis(' '.$value);
1127: }
1128: }
1129: # End of logging code
1130: next if ($key !~ /^$part/);
1131: $key =~ s/^$part\.//;
1132: if (ref($value) eq 'ARRAY') {
1133: if ($key eq 'options') {
1134: $Partdata{$part}->{'_Options'}=$value;
1135: } elsif ($key eq 'concepts') {
1136: $Partdata{$part}->{'_Concepts'}=$value;
1.28 matthew 1137: } elsif ($key eq 'items') {
1138: $Partdata{$part}->{'_Items'}=$value;
1.4 matthew 1139: } elsif ($key =~ /^concept\.(.*)$/) {
1140: my $concept = $1;
1141: foreach my $foil (@$value) {
1142: $Partdata{$part}->{'_Foils'}->{$foil}->{'_Concept'}=
1143: $concept;
1144: }
1.32 matthew 1145: } elsif ($key =~ /^(unit|incorrect|answer|ans_low|ans_high|str_type)$/) {
1.4 matthew 1146: $Partdata{$part}->{$key}=$value;
1147: }
1148: } else {
1149: if ($key=~ /^foil\.text\.(.*)$/) {
1150: my $foil = $1;
1151: $Partdata{$part}->{'_Foils'}->{$foil}->{'name'}=$foil;
1152: $value =~ s/(\s*$|^\s*)//g;
1153: $Partdata{$part}->{'_Foils'}->{$foil}->{'text'}=$value;
1154: } elsif ($key =~ /^foil\.value\.(.*)$/) {
1155: my $foil = $1;
1156: $Partdata{$part}->{'_Foils'}->{$foil}->{'value'}=$value;
1.28 matthew 1157: } elsif ($key eq 'answercomputed') {
1158: $Partdata{$part}->{'answercomputed'} = $value;
1.4 matthew 1159: }
1160: }
1161: }
1162: }
1.28 matthew 1163: # Further debugging code
1164: if (0) {
1165: &Apache::lonnet::logthis('lonstathelpers::get_problem_data');
1166: &log_hash_ref(\%Partdata);
1167: }
1.4 matthew 1168: return %Partdata;
1.5 matthew 1169: }
1170:
1.28 matthew 1171: sub log_array_ref {
1172: my ($arrayref,$prefix) = @_;
1173: return if (ref($arrayref) ne 'ARRAY');
1174: if (! defined($prefix)) { $prefix = ''; };
1175: foreach my $v (@$arrayref) {
1176: if (ref($v) eq 'ARRAY') {
1177: &log_array_ref($v,$prefix.' ');
1178: } elsif (ref($v) eq 'HASH') {
1179: &log_hash_ref($v,$prefix.' ');
1180: } else {
1181: &Apache::lonnet::logthis($prefix.'"'.$v.'"');
1182: }
1183: }
1184: }
1185:
1186: sub log_hash_ref {
1187: my ($hashref,$prefix) = @_;
1188: return if (ref($hashref) ne 'HASH');
1189: if (! defined($prefix)) { $prefix = ''; };
1190: while (my ($k,$v) = each(%$hashref)) {
1191: if (ref($v) eq 'ARRAY') {
1192: &Apache::lonnet::logthis($prefix.'"'.$k.'" = array');
1193: &log_array_ref($v,$prefix.' ');
1194: } elsif (ref($v) eq 'HASH') {
1195: &Apache::lonnet::logthis($prefix.'"'.$k.'" = hash');
1196: &log_hash_ref($v,$prefix.' ');
1197: } else {
1198: &Apache::lonnet::logthis($prefix.'"'.$k.'" => "'.$v.'"');
1199: }
1200: }
1201: }
1.5 matthew 1202: ####################################################
1203: ####################################################
1204:
1205: =pod
1206:
1207: =item &limit_by_time()
1208:
1209: =cut
1210:
1211: ####################################################
1212: ####################################################
1213: sub limit_by_time_form {
1214: my $Starttime_form = '';
1215: my $starttime = &Apache::lonhtmlcommon::get_date_from_form
1216: ('limitby_startdate');
1217: my $endtime = &Apache::lonhtmlcommon::get_date_from_form
1218: ('limitby_enddate');
1219: if (! defined($endtime)) {
1220: $endtime = time;
1221: }
1222: if (! defined($starttime)) {
1223: $starttime = $endtime - 60*60*24*7;
1224: }
1225: my $state;
1226: if (&limit_by_time()) {
1227: $state = '';
1228: } else {
1229: $state = 'disabled';
1230: }
1231: my $startdateform = &Apache::lonhtmlcommon::date_setter
1232: ('Statistics','limitby_startdate',$starttime,undef,undef,$state);
1233: my $enddateform = &Apache::lonhtmlcommon::date_setter
1234: ('Statistics','limitby_enddate',$endtime,undef,undef,$state);
1235: my $Str;
1236: $Str .= '<script language="Javascript" >';
1237: $Str .= 'function toggle_limitby_activity(state) {';
1238: $Str .= ' if (state) {';
1239: $Str .= ' limitby_startdate_enable();';
1240: $Str .= ' limitby_enddate_enable();';
1241: $Str .= ' } else {';
1242: $Str .= ' limitby_startdate_disable();';
1243: $Str .= ' limitby_enddate_disable();';
1244: $Str .= ' }';
1245: $Str .= '}';
1246: $Str .= '</script>';
1247: $Str .= '<fieldset>';
1248: my $timecheckbox = '<input type="checkbox" name="limit_by_time" ';
1249: if (&limit_by_time()) {
1250: $timecheckbox .= ' checked ';
1251: }
1252: $timecheckbox .= 'OnChange="javascript:toggle_limitby_activity(this.checked);" ';
1253: $timecheckbox .= ' />';
1254: $Str .= '<legend>'.&mt('[_1] Limit by time',$timecheckbox).'</legend>';
1255: $Str .= &mt('Start Time: [_1]',$startdateform).'<br />';
1256: $Str .= &mt(' End Time: [_1]',$enddateform).'<br />';
1257: $Str .= '</fieldset>';
1258: return $Str;
1259: }
1260:
1261: sub limit_by_time {
1.46 albertel 1262: if (exists($env{'form.limit_by_time'}) &&
1263: $env{'form.limit_by_time'} ne '' ) {
1.5 matthew 1264: return 1;
1265: } else {
1266: return 0;
1267: }
1268: }
1269:
1270: sub get_time_limits {
1271: my $starttime = &Apache::lonhtmlcommon::get_date_from_form
1272: ('limitby_startdate');
1273: my $endtime = &Apache::lonhtmlcommon::get_date_from_form
1274: ('limitby_enddate');
1275: return ($starttime,$endtime);
1.11 matthew 1276: }
1277:
1.2 matthew 1278: ####################################################
1279: ####################################################
1280:
1281: =pod
1282:
1.12 matthew 1283: =item &manage_caches
1284:
1285: Inputs: $r, apache request object
1286:
1287: Returns: An array of scalars containing html for buttons.
1288:
1289: =cut
1290:
1291: ####################################################
1292: ####################################################
1293: sub manage_caches {
1.23 matthew 1294: my ($r,$formname,$inputname,$update_message) = @_;
1.12 matthew 1295: &Apache::loncoursedata::clear_internal_caches();
1.16 matthew 1296: my $sectionkey =
1297: join(',',
1298: map {
1299: &Apache::lonnet::escape($_);
1.44 matthew 1300: } sort(&Apache::lonstatistics::get_selected_sections())
1.16 matthew 1301: );
1302: my $statuskey = $Apache::lonstatistics::enrollment_status;
1.46 albertel 1303: if (exists($env{'form.ClearCache'}) ||
1304: exists($env{'form.updatecaches'}) ||
1305: (exists($env{'form.firstrun'}) && $env{'form.firstrun'} ne 'no') ||
1306: (exists($env{'form.prevsection'}) &&
1307: $env{'form.prevsection'} ne $sectionkey) ||
1308: (exists($env{'form.prevenrollstatus'}) &&
1309: $env{'form.prevenrollstatus'} ne $statuskey)
1.16 matthew 1310: ) {
1.23 matthew 1311: if (defined($update_message)) {
1312: $r->print($update_message);
1313: }
1.40 matthew 1314: if (0) {
1315: &Apache::lonnet::logthis('Updating mysql student data caches');
1316: }
1.36 matthew 1317: &gather_full_student_data($r,$formname,$inputname);
1.12 matthew 1318: }
1319: #
1.16 matthew 1320: my @Buttons =
1321: ('<input type="submit" name="ClearCache" '.
1322: 'value="'.&mt('Clear Caches').'" />',
1323: '<input type="submit" name="updatecaches" '.
1.17 matthew 1324: 'value="'.&mt('Update Caches').'" />'.
1325: &Apache::loncommon::help_open_topic('Statistics_Cache'),
1.16 matthew 1326: '<input type="hidden" name="prevsection" value="'.$sectionkey.'" />',
1327: '<input type="hidden" name="prevenrollstatus" value="'.$statuskey.'" />'
1328: );
1329: #
1.46 albertel 1330: if (! exists($env{'form.firstrun'})) {
1.12 matthew 1331: $r->print('<input type="hidden" name="firstrun" value="yes" />');
1332: } else {
1333: $r->print('<input type="hidden" name="firstrun" value="no" />');
1334: }
1335: #
1336: return @Buttons;
1337: }
1338:
1.36 matthew 1339: sub gather_full_student_data {
1340: my ($r,$formname,$inputname) = @_;
1341: my $status_type;
1342: if (defined($formname)) {
1343: $status_type = 'inline';
1344: } else {
1345: $status_type = 'popup';
1346: }
1347: my $c = $r->connection();
1348: #
1349: &Apache::loncoursedata::clear_internal_caches();
1350: #
1351: my @Students = @Apache::lonstatistics::Students;
1352: #
1353: # Open the progress window
1354: my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin
1355: ($r,&mt('Student Data Compilation Status'),
1356: &mt('Student Data Compilation Progress'), scalar(@Students),
1357: $status_type,undef,$formname,$inputname);
1358: #
1359: while (my $student = shift @Students) {
1360: return if ($c->aborted());
1361: my $status = &Apache::loncoursedata::ensure_current_full_data
1362: ($student->{'username'},$student->{'domain'},
1.46 albertel 1363: $env{'request.course.id'});
1.36 matthew 1364: &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,
1365: &mt('last student'));
1366: }
1367: &Apache::lonhtmlcommon::Close_PrgWin($r,\%prog_state);
1368: $r->rflush();
1369: return;
1370: }
1.12 matthew 1371:
1.38 matthew 1372: ####################################################
1373: ####################################################
1374:
1375: =pod
1376:
1377: =item &submission_report_form
1378:
1379: Input: The originating reportSelected value for the current stats page.
1380:
1381: Output: Scalar containing HTML with needed form elements and a link to
1382: the student submission reports page.
1383:
1384: =cut
1385:
1386: ####################################################
1387: ####################################################
1388: sub submission_report_form {
1389: my ($original_report) = @_;
1390: # Note: In the link below we change the reportSelected value. If
1391: # the user hits the 'back' button on the browser after getting their
1392: # student submissions report, this value may still be around. So we
1393: # output a script block to set it properly. If the $original_report
1394: # value is unset, you are just asking for trouble.
1395: if (! defined($original_report)) {
1396: &Apache::lonnet::logthis
1397: ('someone called lonstathelpers::submission_report_form without '.
1398: ' enough input.');
1399: }
1400: my $html = $/.
1401: '<script type="Text/JavaScript">'.
1402: "document.Statistics.reportSelected.value='$original_report';".
1403: '</script>'.
1404: '<input type="hidden" name="correctans" value="true" />'.
1405: '<input type="hidden" name="prob_status" value="true" />'.
1406: '<input type="hidden" name="all_sub" value="true" />';
1407: my $output_selector = $/.'<select name="output">'.$/;
1408: foreach ('HTML','Excel','CSV') {
1409: $output_selector .= ' <option value="'.lc($_).'"';
1.46 albertel 1410: if ($env{'form.output'} eq lc($_)) {
1.38 matthew 1411: $output_selector .= ' selected ';
1412: }
1413: $output_selector .='>'.&mt($_).'</option>'.$/;
1414: }
1415: $output_selector .= '</select>'.$/;
1416: my $link = '<a href="javascript:'.
1417: q{document.Statistics.reportSelected.value='student_submission_reports';}.
1418: 'document.Statistics.submit();">';
1419: $html.= &mt('View data as [_1] [_2]go[_3]',$output_selector,
1420: $link,'</a>').$/;
1421: return $html
1422: }
1.12 matthew 1423:
1424: ####################################################
1425: ####################################################
1426:
1427: =pod
1428:
1.2 matthew 1429: =back
1430:
1431: =cut
1432:
1433: ####################################################
1434: ####################################################
1.1 matthew 1435:
1436: 1;
1437:
1438: __END__
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to lonstathelpers.pm CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / loncom / interface / statistics