Annotation of loncom/interface/statistics/lonstathelpers.pm, revision 1.49
1.1 matthew 1: # The LearningOnline Network with CAPA
2: #
1.49 ! albertel 3: # $Id: lonstathelpers.pm,v 1.48 2005/04/07 17:12:09 matthew Exp $
1.1 matthew 4: #
5: # Copyright Michigan State University Board of Trustees
6: #
7: # This file is part of the LearningOnline Network with CAPA (LON-CAPA).
8: #
9: # LON-CAPA is free software; you can redistribute it and/or modify
10: # it under the terms of the GNU General Public License as published by
11: # the Free Software Foundation; either version 2 of the License, or
12: # (at your option) any later version.
13: #
14: # LON-CAPA is distributed in the hope that it will be useful,
15: # but WITHOUT ANY WARRANTY; without even the implied warranty of
16: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: # GNU General Public License for more details.
18: #
19: # You should have received a copy of the GNU General Public License
20: # along with LON-CAPA; if not, write to the Free Software
21: # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22: #
23: # /home/httpd/html/adm/gpl.txt
24: #
25: # http://www.lon-capa.org/
26: #
27: ####################################################
28: ####################################################
29:
30: =pod
31:
32: =head1 NAME
33:
34: Apache::lonstathelpers - helper routines used by statistics
35:
36: =head1 SYNOPSIS
37:
38: This module provides a place to consolidate much of the statistics
39: routines that are needed across multiple statistics functions.
40:
41: =head1 OVERVIEW
42:
43: =over 4
44:
45: =cut
46:
47: ####################################################
48: ####################################################
49: package Apache::lonstathelpers;
50:
51: use strict;
1.46 albertel 52: use Apache::lonnet;
1.1 matthew 53: use Apache::loncommon();
54: use Apache::lonhtmlcommon();
55: use Apache::loncoursedata();
56: use Apache::lonstatistics;
57: use Apache::lonlocal;
58: use HTML::Entities();
59: use Time::Local();
60: use Spreadsheet::WriteExcel();
1.8 matthew 61: use GDBM_File;
62: use Storable qw(freeze thaw);
1.1 matthew 63:
64: ####################################################
65: ####################################################
66:
67: =pod
68:
69: =item &render_resource($resource)
70:
1.42 matthew 71: Input: a navmaps resource
1.1 matthew 72:
73: Retunrs: a scalar containing html for a rendering of the problem
74: within a table.
75:
76: =cut
77:
78: ####################################################
79: ####################################################
80: sub render_resource {
81: my ($resource) = @_;
82: ##
83: ## Render the problem
1.43 matthew 84: my ($base) = ($resource->src =~ m|^(.*/)[^/]*$|);
85: $base="http://".$ENV{'SERVER_NAME'}.$base;
1.40 matthew 86: my ($src,$symb)=($resource->src,&Apache::lonnet::escape($resource->symb));
87: my $rendered_problem = &Apache::lonnet::ssi_body($src.'?symb='.$symb);
1.1 matthew 88: $rendered_problem =~ s/<\s*form\s*/<nop /g;
89: $rendered_problem =~ s|(<\s*/form\s*>)|<\/nop>|g;
90: return '<table bgcolor="ffffff"><tr><td>'.
91: '<base href="'.$base.'" />'.
92: $rendered_problem.
93: '</td></tr></table>';
94: }
1.2 matthew 95:
96: ####################################################
97: ####################################################
98:
99: =pod
100:
1.40 matthew 101: =item &get_resources
102:
103: =cut
104:
105: ####################################################
106: ####################################################
107: sub get_resources {
108: my ($navmap,$sequence) = @_;
109: my @resources = $navmap->retrieveResources($sequence,
110: sub { shift->is_problem(); },
111: 0,0,0);
112: return @resources;
113: }
114:
115: ####################################################
116: ####################################################
117:
118: =pod
119:
120: =item &problem_selector($AcceptedResponseTypes)
1.2 matthew 121:
122: Input: scalar containing regular expression which matches response
123: types to show. '.' will yield all, '(option|radiobutton)' will match
124: all option response and radiobutton problems.
125:
126: Returns: A string containing html for a table which lists the sequences
127: and their contents. A radiobutton is provided for each problem.
1.14 matthew 128: Skips 'survey' problems.
1.2 matthew 129:
130: =cut
131:
132: ####################################################
133: ####################################################
1.40 matthew 134: sub problem_selector {
1.2 matthew 135: my ($AcceptedResponseTypes) = @_;
136: my $Str;
137: $Str = "\n<table>\n";
1.27 matthew 138: my $rb_count =0;
1.40 matthew 139: my ($navmap,@sequences) =
140: &Apache::lonstatistics::selected_sequences_with_assessments('all');
141: return $navmap if (! ref($navmap)); # error
142: foreach my $seq (@sequences) {
1.2 matthew 143: my $seq_str = '';
1.40 matthew 144: foreach my $res (&get_resources($navmap,$seq)) {
145: foreach my $part (@{$res->parts}) {
146: my @response_ids = $res->responseIds($part);
147: my @response_types = $res->responseType($part);
148: for (my $i=0;$i<scalar(@response_types);$i++){
149: my $respid = $response_ids[$i];
150: my $resptype = $response_types[$i];
1.2 matthew 151: if ($resptype =~ m/$AcceptedResponseTypes/) {
1.40 matthew 152: my $value = &make_target_id({symb=>$res->symb,
1.2 matthew 153: part=>$part,
154: respid=>$respid,
155: resptype=>$resptype});
156: my $checked = '';
1.46 albertel 157: if ($env{'form.problemchoice'} eq $value) {
1.2 matthew 158: $checked = 'checked ';
159: }
1.40 matthew 160: my $title = $res->compTitle;
1.2 matthew 161: if (! defined($title) || $title eq '') {
1.40 matthew 162: ($title) = ($res->src =~ m:/([^/]*)$:);
1.2 matthew 163: }
1.27 matthew 164: $seq_str .= '<tr>'.
165: qq{<td><input type="radio" id="$rb_count" name="problemchoice" value="$value" $checked /></td>}.
166: '<td><label for="'.$rb_count.'">'.$resptype.'</label></td>'.
167: '<td><label for="'.$rb_count.'">'.$title.'</label>';
1.40 matthew 168: if (scalar(@response_ids) > 1) {
1.2 matthew 169: $seq_str .= &mt('response').' '.$respid;
170: }
1.41 matthew 171: my $link = $res->src.'?symb='.
1.40 matthew 172: &Apache::lonnet::escape($res->symb);
1.27 matthew 173: $seq_str .= (' 'x2).
1.34 matthew 174: qq{<a target="preview" href="$link">view</a>};
1.2 matthew 175: $seq_str .= "</td></tr>\n";
1.27 matthew 176: $rb_count++;
1.2 matthew 177: }
178: }
179: }
180: }
181: if ($seq_str ne '') {
1.40 matthew 182: $Str .= '<tr><td> </td><td colspan="2"><b>'.$seq->compTitle.'</b></td>'.
1.2 matthew 183: "</tr>\n".$seq_str;
184: }
185: }
186: $Str .= "</table>\n";
187: return $Str;
188: }
189:
190: ####################################################
191: ####################################################
192:
193: =pod
194:
1.24 matthew 195: =item &MultipleProblemSelector($navmap,$selected,$inputname)
1.21 matthew 196:
197: Generate HTML with checkboxes for problem selection.
198:
199: Input:
200:
201: $navmap: a navmap object. If undef, navmaps will be called to create a
202: new object.
203:
204: $selected: Scalar, Array, or hash reference of currently selected items.
205:
206: $inputname: The name of the form elements to use for the checkboxs.
207:
208: Returns: A string containing html for a table which lists the sequences
209: and their contents. A checkbox is provided for each problem.
210:
211: =cut
212:
213: ####################################################
214: ####################################################
215: sub MultipleProblemSelector {
1.23 matthew 216: my ($navmap,$inputname,$formname)=@_;
1.46 albertel 217: my $cid = $env{'request.course.id'};
1.21 matthew 218: my $Str;
219: # Massage the input as needed.
220: if (! defined($navmap)) {
221: $navmap = Apache::lonnavmaps::navmap->new();
222: if (! defined($navmap)) {
223: $Str .=
224: '<h1>'.&mt('Error: cannot process course structure').'</h1>';
225: return $Str;
226: }
227: }
228: my $selected = {map { ($_,1) } (&get_selected_symbs($inputname))};
229: # Header
230: $Str .= <<"END";
1.25 matthew 231: <script language="JavaScript" type="text/javascript">
232: function checkall(value,seqid) {
1.21 matthew 233: for (i=0; i<document.forms.$formname.elements.length; i++) {
234: ele = document.forms.$formname.elements[i];
235: if (ele.name == '$inputname') {
1.25 matthew 236: if (seqid != null) {
237: itemid = document.forms.$formname.elements[i].id;
238: thing = itemid.split(':');
239: if (thing[0] == seqid) {
240: document.forms.$formname.elements[i].checked=value;
241: }
242: } else {
243: document.forms.$formname.elements[i].checked=value;
244: }
1.21 matthew 245: }
246: }
247: }
248: </script>
249: END
250: $Str .=
251: '<a href="javascript:checkall(true)">'.&mt('Select All').'</a>'.
252: (' 'x4).
253: '<a href="javascript:checkall(false)">'.&mt('Unselect All').'</a>';
254: $Str .= $/.'<table>'.$/;
255: my $iterator = $navmap->getIterator(undef, undef, undef, 1);
256: my $sequence_string;
1.25 matthew 257: my $seq_id = 0;
1.46 albertel 258: my @Accumulator = (&new_accumulator($env{'course.'.$cid.'.description'},
1.21 matthew 259: '',
260: '',
1.25 matthew 261: $seq_id++,
1.21 matthew 262: $inputname));
263: my @Sequence_Data;
264: while (my $curRes = $iterator->next()) {
265: if ($curRes == $iterator->END_MAP) {
266: if (ref($Accumulator[-1]) eq 'CODE') {
1.24 matthew 267: my $old_accumulator = pop(@Accumulator);
268: push(@Sequence_Data,&{$old_accumulator}());
1.21 matthew 269: }
270: } elsif ($curRes == $iterator->BEGIN_MAP) {
271: # Not much to do here.
272: }
273: next if (! ref($curRes));
274: if ($curRes->is_map) {
1.24 matthew 275: push(@Accumulator,&new_accumulator($curRes->compTitle,
1.21 matthew 276: $curRes->src,
277: $curRes->symb,
1.25 matthew 278: $seq_id++,
1.21 matthew 279: $inputname));
280: } elsif ($curRes->is_problem) {
281: if (@Accumulator && $Accumulator[-1] ne '') {
282: &{$Accumulator[-1]}($curRes,
283: exists($selected->{$curRes->symb}));
284: }
285: }
286: }
287: my $course_seq = pop(@Sequence_Data);
288: foreach my $seq ($course_seq,@Sequence_Data) {
289: #my $seq = pop(@Sequence_Data);
290: next if (! defined($seq) || ref($seq) ne 'HASH');
291: $Str.= '<tr><td colspan="2">'.
1.25 matthew 292: '<b>'.$seq->{'title'}.'</b>'.(' 'x2).
293: '<a href="javascript:checkall(true,'.$seq->{'id'}.')">'.
294: &mt('Select').'</a>'.(' 'x2).
295: '<a href="javascript:checkall(false,'.$seq->{'id'}.')">'.
296: &mt('Unselect').'</a>'.(' 'x2).
1.21 matthew 297: '</td></tr>'.$/;
298: $Str.= $seq->{'html'};
299: }
300: $Str .= '</table>'.$/;
301: return $Str;
302: }
303:
304: sub new_accumulator {
1.25 matthew 305: my ($title,$src,$symb,$seq_id,$inputname) = @_;
1.21 matthew 306: my $target;
1.25 matthew 307: my $item_id=0;
1.21 matthew 308: return
309: sub {
310: if (@_) {
311: my ($res,$checked) = @_;
1.23 matthew 312: $target.='<tr><td><label>'.
1.21 matthew 313: '<input type="checkbox" name="'.$inputname.'" ';
314: if ($checked) {
315: $target .= 'checked ';
316: }
1.25 matthew 317: $target .= 'id="'.$seq_id.':'.$item_id++.'" ';
1.21 matthew 318: $target.=
319: 'value="'.&Apache::lonnet::escape($res->symb).'" />'.
1.26 matthew 320: ' '.$res->compTitle.'</label>'.
321: (' 'x2).'<a target="preview" '.
1.34 matthew 322: 'href="'.$res->src.'?symb='.
1.39 matthew 323: &Apache::lonnet::escape($res->symb).'">view</a>'.
1.26 matthew 324: '</td></tr>'.$/;
1.21 matthew 325: } else {
326: if (defined($target)) {
327: return { title => $title,
328: symb => $symb,
329: src => $src,
1.25 matthew 330: id => $seq_id,
1.21 matthew 331: html => $target, };
332: }
333: return undef;
334: }
335: };
336: }
337:
338: sub get_selected_symbs {
339: my ($inputfield) = @_;
340: my $field = 'form.'.$inputfield;
1.48 matthew 341: my @symbs = (map {
342: &Apache::lonnet::unescape($_);
343: } &Apache::loncommon::get_env_multiple($field));
344: return @symbs;
1.21 matthew 345: }
346:
347: ####################################################
348: ####################################################
349:
350: =pod
351:
1.2 matthew 352: =item &make_target_id($target)
353:
354: Inputs: Hash ref with the following entries:
355: $target->{'symb'}, $target->{'part'}, $target->{'respid'},
356: $target->{'resptype'}.
357:
358: Returns: A string, suitable for a form parameter, which uniquely identifies
359: the problem, part, and response to do statistical analysis on.
360:
361: Used by Apache::lonstathelpers::ProblemSelector().
362:
363: =cut
364:
365: ####################################################
366: ####################################################
367: sub make_target_id {
368: my ($target) = @_;
369: my $id = &Apache::lonnet::escape($target->{'symb'}).':'.
370: &Apache::lonnet::escape($target->{'part'}).':'.
371: &Apache::lonnet::escape($target->{'respid'}).':'.
372: &Apache::lonnet::escape($target->{'resptype'});
373: return $id;
374: }
375:
376: ####################################################
377: ####################################################
378:
379: =pod
380:
381: =item &get_target_from_id($id)
382:
383: Inputs: $id, a scalar string from Apache::lonstathelpers::make_target_id().
384:
385: Returns: A hash reference, $target, containing the following keys:
386: $target->{'symb'}, $target->{'part'}, $target->{'respid'},
387: $target->{'resptype'}.
388:
389: =cut
390:
391: ####################################################
392: ####################################################
393: sub get_target_from_id {
394: my ($id) = @_;
1.21 matthew 395: if (! ref($id)) {
396: my ($symb,$part,$respid,$resptype) = split(':',$id);
397: return ({ symb => &Apache::lonnet::unescape($symb),
398: part => &Apache::lonnet::unescape($part),
399: respid => &Apache::lonnet::unescape($respid),
400: resptype => &Apache::lonnet::unescape($resptype)});
401: } elsif (ref($id) eq 'ARRAY') {
402: my @Return;
403: foreach my $selected (@$id) {
404: my ($symb,$part,$respid,$resptype) = split(':',$selected);
405: push(@Return,{ symb => &Apache::lonnet::unescape($symb),
406: part => &Apache::lonnet::unescape($part),
407: respid => &Apache::lonnet::unescape($respid),
408: resptype => &Apache::lonnet::unescape($resptype)});
409: }
410: return \@Return;
411: }
1.2 matthew 412: }
413:
414: ####################################################
415: ####################################################
416:
417: =pod
418:
1.13 matthew 419: =item &get_prev_curr_next($target,$AcceptableResponseTypes,$granularity)
1.2 matthew 420:
421: Determine the problem parts or responses preceeding and following the
422: current resource.
423:
424: Inputs: $target (see &Apache::lonstathelpers::get_target_from_id())
425: $AcceptableResponseTypes, regular expression matching acceptable
426: response types,
1.13 matthew 427: $granularity, either 'part', 'response', or 'part_survey'
1.2 matthew 428:
429: Returns: three hash references, $prev, $curr, $next, which refer to the
430: preceeding, current, or following problem parts or responses, depending
431: on the value of $granularity. Values of undef indicate there is no
432: previous or next part/response. A value of undef for all three indicates
433: there was no match found to the current part/resource.
434:
435: The hash references contain the following keys:
436: symb, part, resource
437:
438: If $granularity eq 'response', the following ADDITIONAL keys will be present:
439: respid, resptype
440:
441: =cut
442:
443: ####################################################
444: ####################################################
445: sub get_prev_curr_next {
446: my ($target,$AcceptableResponseTypes,$granularity) = @_;
447: #
448: # Build an array with the data we need to search through
449: my @Resource;
1.40 matthew 450: my ($navmap,@sequences) =
451: &Apache::lonstatistics::selected_sequences_with_assessments('all');
452: return $navmap if (! ref($navmap));
453: foreach my $seq (@sequences) {
454: my @resources = &get_resources($navmap,$seq);
455: foreach my $res (@resources) {
456: foreach my $part (@{$res->parts}) {
457: if ($res->is_survey($part) && ($granularity eq 'part_survey')){
1.20 matthew 458: push (@Resource,
1.40 matthew 459: { symb => $res->symb,
1.20 matthew 460: part => $part,
461: resource => $res,
462: } );
1.13 matthew 463: } elsif ($granularity eq 'part') {
1.2 matthew 464: push (@Resource,
1.40 matthew 465: { symb => $res->symb,
1.2 matthew 466: part => $part,
467: resource => $res,
468: } );
469: } elsif ($granularity eq 'response') {
1.40 matthew 470: my @response_ids = $res->responseIds($part);
471: my @response_types = $res->responseType($part);
1.2 matthew 472: for (my $i=0;
1.40 matthew 473: $i<scalar(@response_ids);
1.2 matthew 474: $i++){
1.40 matthew 475: my $respid = $response_ids[$i];
476: my $resptype = $response_types[$i];
1.2 matthew 477: next if ($resptype !~ m/$AcceptableResponseTypes/);
478: push (@Resource,
1.40 matthew 479: { symb => $res->symb,
1.2 matthew 480: part => $part,
1.40 matthew 481: respid => $respid,
482: resptype => $resptype,
1.2 matthew 483: resource => $res,
484: } );
485: }
486: }
487: }
488: }
489: }
490: #
491: # Get the index of the current situation
492: my $curr_idx;
493: for ($curr_idx=0;$curr_idx<$#Resource;$curr_idx++) {
494: my $curr_item = $Resource[$curr_idx];
1.13 matthew 495: if ($granularity eq 'part' || $granularity eq 'part_survey') {
1.2 matthew 496: if ($curr_item->{'symb'} eq $target->{'symb'} &&
497: $curr_item->{'part'} eq $target->{'part'}) {
498: last;
499: }
500: } elsif ($granularity eq 'response') {
501: if ($curr_item->{'symb'} eq $target->{'symb'} &&
502: $curr_item->{'part'} eq $target->{'part'} &&
503: $curr_item->{'respid'} eq $target->{'respid'} &&
504: $curr_item->{'resptype'} eq $target->{'resptype'}) {
505: last;
506: }
507: }
508: }
509: my $curr_item = $Resource[$curr_idx];
1.13 matthew 510: if ($granularity eq 'part' || $granularity eq 'part_survey') {
1.2 matthew 511: if ($curr_item->{'symb'} ne $target->{'symb'} ||
512: $curr_item->{'part'} ne $target->{'part'}) {
513: # bogus symb - return nothing
514: return (undef,undef,undef);
515: }
516: } elsif ($granularity eq 'response') {
517: if ($curr_item->{'symb'} ne $target->{'symb'} ||
518: $curr_item->{'part'} ne $target->{'part'} ||
519: $curr_item->{'respid'} ne $target->{'respid'} ||
520: $curr_item->{'resptype'} ne $target->{'resptype'}){
521: # bogus symb - return nothing
522: return (undef,undef,undef);
523: }
524: }
525: #
526: # Now just pick up the data we need
527: my ($prev,$curr,$next);
528: if ($curr_idx == 0) {
529: $prev = undef;
530: $curr = $Resource[$curr_idx ];
531: $next = $Resource[$curr_idx+1];
532: } elsif ($curr_idx == $#Resource) {
533: $prev = $Resource[$curr_idx-1];
534: $curr = $Resource[$curr_idx ];
535: $next = undef;
536: } else {
537: $prev = $Resource[$curr_idx-1];
538: $curr = $Resource[$curr_idx ];
539: $next = $Resource[$curr_idx+1];
540: }
1.40 matthew 541: return ($navmap,$prev,$curr,$next);
1.4 matthew 542: }
543:
1.9 matthew 544:
545: #####################################################
546: #####################################################
547:
548: =pod
549:
550: =item GetStudentAnswers($r,$problem,$Students)
551:
552: Determines the correct answer for a set of students on a given problem.
553: The students answers are stored in the student hashes pointed to by the
554: array @$Students under the key 'answer'.
555:
556: Inputs: $r
557: $problem: hash reference containing the keys 'resource', 'part', and 'respid'.
558: $Students: reference to array containing student hashes (need 'username',
559: 'domain').
560:
561: Returns: nothing
562:
563: =cut
564:
565: #####################################################
566: #####################################################
567: sub GetStudentAnswers {
1.12 matthew 568: my ($r,$problem,$Students,$formname,$inputname) = @_;
1.31 matthew 569: my %answers;
1.12 matthew 570: my $status_type;
571: if (defined($formname)) {
572: $status_type = 'inline';
573: } else {
574: $status_type = 'popup';
575: }
1.9 matthew 576: my $c = $r->connection();
577: my %Answers;
578: my ($resource,$partid,$respid) = ($problem->{'resource'},
579: $problem->{'part'},
580: $problem->{'respid'});
581: # Read in the cache (if it exists) before we start timing things.
582: &Apache::lonstathelpers::ensure_proper_cache($resource->{'symb'});
583: # Open progress window
584: my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin
585: ($r,'Student Answer Compilation Status',
1.12 matthew 586: 'Student Answer Compilation Progress', scalar(@$Students),
587: $status_type,undef,$formname,$inputname);
1.9 matthew 588: $r->rflush();
589: foreach my $student (@$Students) {
590: last if ($c->aborted());
591: my $sname = $student->{'username'};
592: my $sdom = $student->{'domain'};
1.30 matthew 593: my $answer = &Apache::lonstathelpers::get_student_answer
1.9 matthew 594: ($resource,$sname,$sdom,$partid,$respid);
595: &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,
596: &mt('last student'));
1.31 matthew 597: $answers{$answer}++;
1.9 matthew 598: $student->{'answer'} = $answer;
599: }
1.29 matthew 600: &Apache::lonstathelpers::write_analysis_cache();
1.9 matthew 601: return if ($c->aborted());
602: $r->rflush();
603: # close progress window
604: &Apache::lonhtmlcommon::Close_PrgWin($r,\%prog_state);
1.31 matthew 605: return \%answers;
1.9 matthew 606: }
1.4 matthew 607:
608: #####################################################
609: #####################################################
610:
611: =pod
612:
613: =item analyze_problem_as_student
614:
1.30 matthew 615: Analyzes a homework problem for a student
1.4 matthew 616:
617: Inputs: $resource: a resource object
618: $sname, $sdom, $partid, $respid
619:
1.30 matthew 620: Returns: the problem analysis hash
1.6 matthew 621:
1.4 matthew 622: =cut
623:
624: #####################################################
625: #####################################################
626: sub analyze_problem_as_student {
1.30 matthew 627: my ($resource,$sname,$sdom) = @_;
1.22 matthew 628: if (ref($resource) ne 'HASH') {
629: my $res = $resource;
630: $resource = { 'src' => $res->src,
631: 'symb' => $res->symb,
632: 'parts' => $res->parts };
633: foreach my $part (@{$resource->{'parts'}}) {
634: $resource->{'partdata'}->{$part}->{'ResponseIds'}=
635: [$res->responseIds($part)];
636: }
637: }
1.4 matthew 638: my $url = $resource->{'src'};
639: my $symb = $resource->{'symb'};
1.29 matthew 640: my $analysis = &get_from_analysis_cache($sname,$sdom,$symb);
641: if (! defined($analysis)) {
1.46 albertel 642: my $courseid = $env{'request.course.id'};
1.29 matthew 643: my $Answ=&Apache::lonnet::ssi($url,('grade_target' => 'analyze',
644: 'grade_domain' => $sdom,
645: 'grade_username' => $sname,
646: 'grade_symb' => $symb,
647: 'grade_courseid' => $courseid));
648: (my $garbage,$analysis)=split(/_HASH_REF__/,$Answ,2);
649: &store_analysis($sname,$sdom,$symb,$analysis);
650: }
651: my %Answer=&Apache::lonnet::str2hash($analysis);
1.6 matthew 652: #
1.30 matthew 653: return \%Answer;
654: }
655:
656: #####################################################
657: #####################################################
658:
659: =pod
660:
661: =item get_student_answer
662:
663: Analyzes a homework problem for a particular student and returns the correct
664: answer. Attempts to put together an answer for problem types
665: that do not natively support it.
666:
667: Inputs: $resource: a resource object (from navmaps or hash from loncoursedata)
668: $sname, $sdom, $partid, $respid
669:
670: Returns: $answer
671:
672: If $partid and $respid are specified, $answer is simply a scalar containing
673: the correct answer for the response.
674:
675: If $partid or $respid are undefined, $answer will be a hash reference with
676: keys $partid.'.'.$respid.'.answer'.
677:
678: =cut
679:
680: #####################################################
681: #####################################################
682: sub get_student_answer {
683: my ($resource,$sname,$sdom,$partid,$respid) = @_;
684: #
685: if (ref($resource) ne 'HASH') {
686: my $res = $resource;
687: $resource = { 'src' => $res->src,
688: 'symb' => $res->symb,
689: 'parts' => $res->parts };
690: foreach my $part (@{$resource->{'parts'}}) {
691: $resource->{'partdata'}->{$part}->{'ResponseIds'}=
692: [$res->responseIds($part)];
693: }
694: }
695: #
696: my $analysis =
697: &analyze_problem_as_student($resource,$sname,$sdom);
1.29 matthew 698: my $answer;
1.8 matthew 699: foreach my $partid (@{$resource->{'parts'}}) {
1.6 matthew 700: my $partdata = $resource->{'partdata'}->{$partid};
701: foreach my $respid (@{$partdata->{'ResponseIds'}}) {
702: my $prefix = $partid.'.'.$respid;
703: my $key = $prefix.'.answer';
1.30 matthew 704: $answer->{$partid}->{$respid} =
705: &get_answer($prefix,$key,%$analysis);
1.6 matthew 706: }
1.8 matthew 707: }
1.30 matthew 708: my $returnvalue;
1.8 matthew 709: if (! defined($partid)) {
710: $returnvalue = $answer;
711: } elsif (! defined($respid)) {
712: $returnvalue = $answer->{$partid};
1.6 matthew 713: } else {
1.8 matthew 714: $returnvalue = $answer->{$partid}->{$respid};
1.6 matthew 715: }
716: return $returnvalue;
717: }
718:
719: sub get_answer {
720: my ($prefix,$key,%Answer) = @_;
721: my $returnvalue;
1.4 matthew 722: if (exists($Answer{$key})) {
723: my $student_answer = $Answer{$key}->[0];
724: if (! defined($student_answer)) {
725: $student_answer = $Answer{$key}->[1];
726: }
727: $returnvalue = $student_answer;
728: } else {
729: if (exists($Answer{$prefix.'.shown'})) {
730: # The response has foils
731: my %values;
732: while (my ($k,$v) = each(%Answer)) {
733: next if ($k !~ /^$prefix\.foil\.(value|area)\.(.*)$/);
734: my $foilname = $2;
735: $values{$foilname}=$v;
736: }
737: foreach my $foil (@{$Answer{$prefix.'.shown'}}) {
738: if (ref($values{$foil}) eq 'ARRAY') {
1.10 albertel 739: $returnvalue.=&HTML::Entities::encode($foil,'<>&"').'='.
740: join(',',map {&HTML::Entities::encode($_,'<>&"')} @{$values{$foil}}).'&';
1.4 matthew 741: } else {
1.10 albertel 742: $returnvalue.=&HTML::Entities::encode($foil,'<>&"').'='.
743: &HTML::Entities::encode($values{$foil},'<>&"').'&';
1.4 matthew 744: }
745: }
746: $returnvalue =~ s/ /\%20/g;
747: chop ($returnvalue);
748: }
749: }
750: return $returnvalue;
751: }
1.8 matthew 752:
753: #####################################################
754: #####################################################
755:
756: =pod
757:
758: =item Caching routines
759:
760: =over 4
761:
1.29 matthew 762: =item &load_analysis_cache($symb)
1.8 matthew 763:
764: Loads the cache for the given symb into memory from disk.
765: Requires the cache filename be set.
766: Only should be called by &ensure_proper_cache.
767:
768: =cut
769:
770: #####################################################
771: #####################################################
772: {
773: my $cache_filename = undef;
774: my $current_symb = undef;
775: my %cache;
776:
1.29 matthew 777: sub load_analysis_cache {
1.8 matthew 778: my ($symb) = @_;
779: return if (! defined($cache_filename));
780: if (! defined($current_symb) || $current_symb ne $symb) {
781: undef(%cache);
782: my $storedstring;
783: my %cache_db;
784: if (tie(%cache_db,'GDBM_File',$cache_filename,&GDBM_READER(),0640)) {
785: $storedstring = $cache_db{&Apache::lonnet::escape($symb)};
786: untie(%cache_db);
787: }
788: if (defined($storedstring)) {
789: %cache = %{thaw($storedstring)};
790: }
791: }
792: return;
793: }
794:
795: #####################################################
796: #####################################################
797:
798: =pod
799:
1.29 matthew 800: =item &get_from_analysis_cache($sname,$sdom,$symb,$partid,$respid)
1.8 matthew 801:
802: Returns the appropriate data from the cache, or undef if no data exists.
803:
804: =cut
805:
806: #####################################################
807: #####################################################
1.29 matthew 808: sub get_from_analysis_cache {
809: my ($sname,$sdom,$symb) = @_;
1.8 matthew 810: &ensure_proper_cache($symb);
811: my $returnvalue;
1.29 matthew 812: if (exists($cache{$sname.':'.$sdom})) {
813: $returnvalue = $cache{$sname.':'.$sdom};
1.8 matthew 814: } else {
815: $returnvalue = undef;
816: }
817: return $returnvalue;
818: }
819:
820: #####################################################
821: #####################################################
822:
823: =pod
824:
1.29 matthew 825: =item &write_analysis_cache($symb)
1.8 matthew 826:
827: Writes the in memory cache to disk so that it can be read in with
1.29 matthew 828: &load_analysis_cache($symb).
1.8 matthew 829:
830: =cut
831:
832: #####################################################
833: #####################################################
1.29 matthew 834: sub write_analysis_cache {
1.8 matthew 835: return if (! defined($current_symb) || ! defined($cache_filename));
836: my %cache_db;
837: my $key = &Apache::lonnet::escape($current_symb);
838: if (tie(%cache_db,'GDBM_File',$cache_filename,&GDBM_WRCREAT(),0640)) {
839: my $storestring = freeze(\%cache);
840: $cache_db{$key}=$storestring;
841: $cache_db{$key.'.time'}=time;
842: untie(%cache_db);
843: }
844: undef(%cache);
845: undef($current_symb);
846: undef($cache_filename);
847: return;
848: }
849:
850: #####################################################
851: #####################################################
852:
853: =pod
854:
855: =item &ensure_proper_cache($symb)
856:
857: Called to make sure we have the proper cache set up. This is called
1.29 matthew 858: prior to every analysis lookup.
1.8 matthew 859:
860: =cut
861:
862: #####################################################
863: #####################################################
864: sub ensure_proper_cache {
865: my ($symb) = @_;
1.46 albertel 866: my $cid = $env{'request.course.id'};
1.8 matthew 867: my $new_filename = '/home/httpd/perl/tmp/'.
1.29 matthew 868: 'problemanalysis_'.$cid.'_analysis_cache.db';
1.8 matthew 869: if (! defined($cache_filename) ||
870: $cache_filename ne $new_filename ||
871: ! defined($current_symb) ||
872: $current_symb ne $symb) {
873: $cache_filename = $new_filename;
874: # Notice: $current_symb is not set to $symb until after the cache is
1.29 matthew 875: # loaded. This is what tells &load_analysis_cache to load in a new
1.8 matthew 876: # symb cache.
1.29 matthew 877: &load_analysis_cache($symb);
1.8 matthew 878: $current_symb = $symb;
879: }
880: }
881:
882: #####################################################
883: #####################################################
884:
885: =pod
886:
1.29 matthew 887: =item &store_analysis($sname,$sdom,$symb,$partid,$respid,$dataset)
1.8 matthew 888:
1.29 matthew 889: Stores the analysis data in the in memory cache.
1.8 matthew 890:
891: =cut
892:
893: #####################################################
894: #####################################################
1.29 matthew 895: sub store_analysis {
896: my ($sname,$sdom,$symb,$dataset) = @_;
1.8 matthew 897: return if ($symb ne $current_symb);
1.29 matthew 898: $cache{$sname.':'.$sdom}=$dataset;
1.8 matthew 899: return;
900: }
901:
902: }
903: #####################################################
904: #####################################################
905:
906: =pod
907:
908: =back
909:
910: =cut
911:
912: #####################################################
913: #####################################################
1.4 matthew 914:
915: ##
916: ## The following is copied from datecalc1.pl, part of the
917: ## Spreadsheet::WriteExcel CPAN module.
918: ##
919: ##
920: ######################################################################
921: #
922: # Demonstration of writing date/time cells to Excel spreadsheets,
923: # using UNIX/Perl time as source of date/time.
924: #
925: # Copyright 2000, Andrew Benham, adsb@bigfoot.com
926: #
927: ######################################################################
928: #
929: # UNIX/Perl time is the time since the Epoch (00:00:00 GMT, 1 Jan 1970)
930: # measured in seconds.
931: #
932: # An Excel file can use exactly one of two different date/time systems.
933: # In these systems, a floating point number represents the number of days
934: # (and fractional parts of the day) since a start point. The floating point
935: # number is referred to as a 'serial'.
936: # The two systems ('1900' and '1904') use different starting points:
937: # '1900'; '1.00' is 1 Jan 1900 BUT 1900 is erroneously regarded as
938: # a leap year - see:
939: # http://support.microsoft.com/support/kb/articles/Q181/3/70.asp
940: # for the excuse^H^H^H^H^H^Hreason.
941: # '1904'; '1.00' is 2 Jan 1904.
942: #
943: # The '1904' system is the default for Apple Macs. Windows versions of
944: # Excel have the option to use the '1904' system.
945: #
946: # Note that Visual Basic's "DateSerial" function does NOT erroneously
947: # regard 1900 as a leap year, and thus its serials do not agree with
948: # the 1900 serials of Excel for dates before 1 Mar 1900.
949: #
950: # Note that StarOffice (at least at version 5.2) does NOT erroneously
951: # regard 1900 as a leap year, and thus its serials do not agree with
952: # the 1900 serials of Excel for dates before 1 Mar 1900.
953: #
954: ######################################################################
955: #
956: # Calculation description
957: # =======================
958: #
959: # 1900 system
960: # -----------
961: # Unix time is '0' at 00:00:00 GMT 1 Jan 1970, i.e. 70 years after 1 Jan 1900.
962: # Of those 70 years, 17 (1904,08,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68)
963: # were leap years with an extra day.
964: # Thus there were 17 + 70*365 days = 25567 days between 1 Jan 1900 and
965: # 1 Jan 1970.
966: # In the 1900 system, '1' is 1 Jan 1900, but as 1900 was not a leap year
967: # 1 Jan 1900 should really be '2', so 1 Jan 1970 is '25569'.
968: #
969: # 1904 system
970: # -----------
971: # Unix time is '0' at 00:00:00 GMT 1 Jan 1970, i.e. 66 years after 1 Jan 1904.
972: # Of those 66 years, 17 (1904,08,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68)
973: # were leap years with an extra day.
974: # Thus there were 17 + 66*365 days = 24107 days between 1 Jan 1904 and
975: # 1 Jan 1970.
976: # In the 1904 system, 2 Jan 1904 being '1', 1 Jan 1970 is '24107'.
977: #
978: ######################################################################
979: #
980: # Copyright (c) 2000, Andrew Benham.
981: # This program is free software. It may be used, redistributed and/or
982: # modified under the same terms as Perl itself.
983: #
984: # Andrew Benham, adsb@bigfoot.com
985: # London, United Kingdom
986: # 11 Nov 2000
987: #
988: ######################################################################
989: #-----------------------------------------------------------
990: # calc_serial()
991: #
992: # Called with (up to) 2 parameters.
993: # 1. Unix timestamp. If omitted, uses current time.
994: # 2. GMT flag. Set to '1' to return serial in GMT.
995: # If omitted, returns serial in appropriate timezone.
996: #
997: # Returns date/time serial according to $DATE_SYSTEM selected
998: #-----------------------------------------------------------
999: sub calc_serial {
1000: # Use 1900 date system on all platforms other than Apple Mac (for which
1001: # use 1904 date system).
1002: my $DATE_SYSTEM = ($^O eq 'MacOS') ? 1 : 0;
1003: my $time = (defined $_[0]) ? $_[0] : time();
1004: my $gmtflag = (defined $_[1]) ? $_[1] : 0;
1005: #
1006: # Divide timestamp by number of seconds in a day.
1007: # This gives a date serial with '0' on 1 Jan 1970.
1008: my $serial = $time / 86400;
1009: #
1010: # Adjust the date serial by the offset appropriate to the
1011: # currently selected system (1900/1904).
1012: if ($DATE_SYSTEM == 0) { # use 1900 system
1013: $serial += 25569;
1014: } else { # use 1904 system
1015: $serial += 24107;
1016: }
1017: #
1018: unless ($gmtflag) {
1019: # Now have a 'raw' serial with the right offset. But this
1020: # gives a serial in GMT, which is false unless the timezone
1021: # is GMT. We need to adjust the serial by the appropriate
1022: # timezone offset.
1023: # Calculate the appropriate timezone offset by seeing what
1024: # the differences between localtime and gmtime for the given
1025: # time are.
1026: #
1027: my @gmtime = gmtime($time);
1028: my @ltime = localtime($time);
1029: #
1030: # For the first 7 elements of the two arrays, adjust the
1031: # date serial where the elements differ.
1032: for (0 .. 6) {
1033: my $diff = $ltime[$_] - $gmtime[$_];
1034: if ($diff) {
1035: $serial += _adjustment($diff,$_);
1036: }
1037: }
1038: }
1039: #
1040: # Perpetuate the error that 1900 was a leap year by decrementing
1041: # the serial if we're using the 1900 system and the date is prior to
1042: # 1 Mar 1900. This has the effect of making serial value '60'
1043: # 29 Feb 1900.
1044: #
1045: # This fix only has any effect if UNIX/Perl time on the platform
1046: # can represent 1900. Many can't.
1047: #
1048: unless ($DATE_SYSTEM) {
1049: $serial-- if ($serial < 61); # '61' is 1 Mar 1900
1050: }
1051: return $serial;
1052: }
1053:
1054: sub _adjustment {
1055: # Based on the difference in the localtime/gmtime array elements
1056: # number, return the adjustment required to the serial.
1057: #
1058: # We only look at some elements of the localtime/gmtime arrays:
1059: # seconds unlikely to be different as all known timezones
1060: # have an offset of integral multiples of 15 minutes,
1061: # but it's easy to do.
1062: # minutes will be different for timezone offsets which are
1063: # not an exact number of hours.
1064: # hours very likely to be different.
1065: # weekday will differ when localtime/gmtime difference
1066: # straddles midnight.
1067: #
1068: # Assume that difference between localtime and gmtime is less than
1069: # 5 days, then don't have to do maths for day of month, month number,
1070: # year number, etc...
1071: #
1072: my ($delta,$element) = @_;
1073: my $adjust = 0;
1074: #
1075: if ($element == 0) { # Seconds
1076: $adjust = $delta/86400; # 60 * 60 * 24
1077: } elsif ($element == 1) { # Minutes
1078: $adjust = $delta/1440; # 60 * 24
1079: } elsif ($element == 2) { # Hours
1080: $adjust = $delta/24; # 24
1081: } elsif ($element == 6) { # Day of week number
1082: # Catch difference straddling Sat/Sun in either direction
1083: $delta += 7 if ($delta < -4);
1084: $delta -= 7 if ($delta > 4);
1085: #
1086: $adjust = $delta;
1087: }
1088: return $adjust;
1089: }
1090:
1091: ###########################################################
1092: ###########################################################
1093:
1094: =pod
1095:
1096: =item get_problem_data
1097:
1098: Returns a data structure describing the problem.
1099:
1100: Inputs: $url
1101:
1102: Returns: %Partdata
1103:
1104: =cut
1105:
1106: ## note: we must force each foil and option to not begin or end with
1107: ## spaces as they are stored without such data.
1108: ##
1109: ###########################################################
1110: ###########################################################
1111: sub get_problem_data {
1112: my ($url) = @_;
1113: my $Answ=&Apache::lonnet::ssi($url,('grade_target' => 'analyze'));
1114: (my $garbage,$Answ)=split(/_HASH_REF__/,$Answ,2);
1115: my %Answer;
1116: %Answer=&Apache::lonnet::str2hash($Answ);
1117: my %Partdata;
1118: foreach my $part (@{$Answer{'parts'}}) {
1119: while (my($key,$value) = each(%Answer)) {
1120: #
1121: # Logging code:
1.7 matthew 1122: if (0) {
1.4 matthew 1123: &Apache::lonnet::logthis($part.' got key "'.$key.'"');
1124: if (ref($value) eq 'ARRAY') {
1125: &Apache::lonnet::logthis(' @'.join(',',@$value));
1126: } else {
1127: &Apache::lonnet::logthis(' '.$value);
1128: }
1129: }
1130: # End of logging code
1131: next if ($key !~ /^$part/);
1132: $key =~ s/^$part\.//;
1133: if (ref($value) eq 'ARRAY') {
1134: if ($key eq 'options') {
1135: $Partdata{$part}->{'_Options'}=$value;
1136: } elsif ($key eq 'concepts') {
1137: $Partdata{$part}->{'_Concepts'}=$value;
1.28 matthew 1138: } elsif ($key eq 'items') {
1139: $Partdata{$part}->{'_Items'}=$value;
1.4 matthew 1140: } elsif ($key =~ /^concept\.(.*)$/) {
1141: my $concept = $1;
1142: foreach my $foil (@$value) {
1143: $Partdata{$part}->{'_Foils'}->{$foil}->{'_Concept'}=
1144: $concept;
1145: }
1.32 matthew 1146: } elsif ($key =~ /^(unit|incorrect|answer|ans_low|ans_high|str_type)$/) {
1.4 matthew 1147: $Partdata{$part}->{$key}=$value;
1148: }
1149: } else {
1150: if ($key=~ /^foil\.text\.(.*)$/) {
1151: my $foil = $1;
1152: $Partdata{$part}->{'_Foils'}->{$foil}->{'name'}=$foil;
1153: $value =~ s/(\s*$|^\s*)//g;
1154: $Partdata{$part}->{'_Foils'}->{$foil}->{'text'}=$value;
1155: } elsif ($key =~ /^foil\.value\.(.*)$/) {
1156: my $foil = $1;
1157: $Partdata{$part}->{'_Foils'}->{$foil}->{'value'}=$value;
1.28 matthew 1158: } elsif ($key eq 'answercomputed') {
1159: $Partdata{$part}->{'answercomputed'} = $value;
1.4 matthew 1160: }
1161: }
1162: }
1163: }
1.28 matthew 1164: # Further debugging code
1165: if (0) {
1166: &Apache::lonnet::logthis('lonstathelpers::get_problem_data');
1167: &log_hash_ref(\%Partdata);
1168: }
1.4 matthew 1169: return %Partdata;
1.5 matthew 1170: }
1171:
1.28 matthew 1172: sub log_array_ref {
1173: my ($arrayref,$prefix) = @_;
1174: return if (ref($arrayref) ne 'ARRAY');
1175: if (! defined($prefix)) { $prefix = ''; };
1176: foreach my $v (@$arrayref) {
1177: if (ref($v) eq 'ARRAY') {
1178: &log_array_ref($v,$prefix.' ');
1179: } elsif (ref($v) eq 'HASH') {
1180: &log_hash_ref($v,$prefix.' ');
1181: } else {
1182: &Apache::lonnet::logthis($prefix.'"'.$v.'"');
1183: }
1184: }
1185: }
1186:
1187: sub log_hash_ref {
1188: my ($hashref,$prefix) = @_;
1189: return if (ref($hashref) ne 'HASH');
1190: if (! defined($prefix)) { $prefix = ''; };
1191: while (my ($k,$v) = each(%$hashref)) {
1192: if (ref($v) eq 'ARRAY') {
1193: &Apache::lonnet::logthis($prefix.'"'.$k.'" = array');
1194: &log_array_ref($v,$prefix.' ');
1195: } elsif (ref($v) eq 'HASH') {
1196: &Apache::lonnet::logthis($prefix.'"'.$k.'" = hash');
1197: &log_hash_ref($v,$prefix.' ');
1198: } else {
1199: &Apache::lonnet::logthis($prefix.'"'.$k.'" => "'.$v.'"');
1200: }
1201: }
1202: }
1.5 matthew 1203: ####################################################
1204: ####################################################
1205:
1206: =pod
1207:
1208: =item &limit_by_time()
1209:
1210: =cut
1211:
1212: ####################################################
1213: ####################################################
1214: sub limit_by_time_form {
1215: my $Starttime_form = '';
1216: my $starttime = &Apache::lonhtmlcommon::get_date_from_form
1217: ('limitby_startdate');
1218: my $endtime = &Apache::lonhtmlcommon::get_date_from_form
1219: ('limitby_enddate');
1220: if (! defined($endtime)) {
1221: $endtime = time;
1222: }
1223: if (! defined($starttime)) {
1224: $starttime = $endtime - 60*60*24*7;
1225: }
1226: my $state;
1227: if (&limit_by_time()) {
1228: $state = '';
1229: } else {
1230: $state = 'disabled';
1231: }
1232: my $startdateform = &Apache::lonhtmlcommon::date_setter
1233: ('Statistics','limitby_startdate',$starttime,undef,undef,$state);
1234: my $enddateform = &Apache::lonhtmlcommon::date_setter
1235: ('Statistics','limitby_enddate',$endtime,undef,undef,$state);
1236: my $Str;
1237: $Str .= '<script language="Javascript" >';
1238: $Str .= 'function toggle_limitby_activity(state) {';
1239: $Str .= ' if (state) {';
1240: $Str .= ' limitby_startdate_enable();';
1241: $Str .= ' limitby_enddate_enable();';
1242: $Str .= ' } else {';
1243: $Str .= ' limitby_startdate_disable();';
1244: $Str .= ' limitby_enddate_disable();';
1245: $Str .= ' }';
1246: $Str .= '}';
1247: $Str .= '</script>';
1248: $Str .= '<fieldset>';
1249: my $timecheckbox = '<input type="checkbox" name="limit_by_time" ';
1250: if (&limit_by_time()) {
1251: $timecheckbox .= ' checked ';
1252: }
1253: $timecheckbox .= 'OnChange="javascript:toggle_limitby_activity(this.checked);" ';
1254: $timecheckbox .= ' />';
1.49 ! albertel 1255: $Str .= '<legend><label>'.&mt('[_1] Limit by time',$timecheckbox).'</label></legend>';
1.5 matthew 1256: $Str .= &mt('Start Time: [_1]',$startdateform).'<br />';
1257: $Str .= &mt(' End Time: [_1]',$enddateform).'<br />';
1258: $Str .= '</fieldset>';
1259: return $Str;
1260: }
1261:
1262: sub limit_by_time {
1.46 albertel 1263: if (exists($env{'form.limit_by_time'}) &&
1264: $env{'form.limit_by_time'} ne '' ) {
1.5 matthew 1265: return 1;
1266: } else {
1267: return 0;
1268: }
1269: }
1270:
1271: sub get_time_limits {
1272: my $starttime = &Apache::lonhtmlcommon::get_date_from_form
1273: ('limitby_startdate');
1274: my $endtime = &Apache::lonhtmlcommon::get_date_from_form
1275: ('limitby_enddate');
1276: return ($starttime,$endtime);
1.11 matthew 1277: }
1278:
1.2 matthew 1279: ####################################################
1280: ####################################################
1281:
1282: =pod
1283:
1.12 matthew 1284: =item &manage_caches
1285:
1286: Inputs: $r, apache request object
1287:
1288: Returns: An array of scalars containing html for buttons.
1289:
1290: =cut
1291:
1292: ####################################################
1293: ####################################################
1294: sub manage_caches {
1.23 matthew 1295: my ($r,$formname,$inputname,$update_message) = @_;
1.12 matthew 1296: &Apache::loncoursedata::clear_internal_caches();
1.16 matthew 1297: my $sectionkey =
1298: join(',',
1299: map {
1300: &Apache::lonnet::escape($_);
1.44 matthew 1301: } sort(&Apache::lonstatistics::get_selected_sections())
1.16 matthew 1302: );
1303: my $statuskey = $Apache::lonstatistics::enrollment_status;
1.46 albertel 1304: if (exists($env{'form.ClearCache'}) ||
1305: exists($env{'form.updatecaches'}) ||
1306: (exists($env{'form.firstrun'}) && $env{'form.firstrun'} ne 'no') ||
1307: (exists($env{'form.prevsection'}) &&
1308: $env{'form.prevsection'} ne $sectionkey) ||
1309: (exists($env{'form.prevenrollstatus'}) &&
1310: $env{'form.prevenrollstatus'} ne $statuskey)
1.16 matthew 1311: ) {
1.23 matthew 1312: if (defined($update_message)) {
1313: $r->print($update_message);
1314: }
1.40 matthew 1315: if (0) {
1316: &Apache::lonnet::logthis('Updating mysql student data caches');
1317: }
1.36 matthew 1318: &gather_full_student_data($r,$formname,$inputname);
1.12 matthew 1319: }
1320: #
1.16 matthew 1321: my @Buttons =
1322: ('<input type="submit" name="ClearCache" '.
1323: 'value="'.&mt('Clear Caches').'" />',
1324: '<input type="submit" name="updatecaches" '.
1.17 matthew 1325: 'value="'.&mt('Update Caches').'" />'.
1326: &Apache::loncommon::help_open_topic('Statistics_Cache'),
1.16 matthew 1327: '<input type="hidden" name="prevsection" value="'.$sectionkey.'" />',
1328: '<input type="hidden" name="prevenrollstatus" value="'.$statuskey.'" />'
1329: );
1330: #
1.46 albertel 1331: if (! exists($env{'form.firstrun'})) {
1.12 matthew 1332: $r->print('<input type="hidden" name="firstrun" value="yes" />');
1333: } else {
1334: $r->print('<input type="hidden" name="firstrun" value="no" />');
1335: }
1336: #
1337: return @Buttons;
1338: }
1339:
1.36 matthew 1340: sub gather_full_student_data {
1341: my ($r,$formname,$inputname) = @_;
1342: my $status_type;
1343: if (defined($formname)) {
1344: $status_type = 'inline';
1345: } else {
1346: $status_type = 'popup';
1347: }
1348: my $c = $r->connection();
1349: #
1350: &Apache::loncoursedata::clear_internal_caches();
1351: #
1352: my @Students = @Apache::lonstatistics::Students;
1353: #
1354: # Open the progress window
1355: my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin
1356: ($r,&mt('Student Data Compilation Status'),
1357: &mt('Student Data Compilation Progress'), scalar(@Students),
1358: $status_type,undef,$formname,$inputname);
1359: #
1360: while (my $student = shift @Students) {
1361: return if ($c->aborted());
1362: my $status = &Apache::loncoursedata::ensure_current_full_data
1363: ($student->{'username'},$student->{'domain'},
1.46 albertel 1364: $env{'request.course.id'});
1.36 matthew 1365: &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,
1366: &mt('last student'));
1367: }
1368: &Apache::lonhtmlcommon::Close_PrgWin($r,\%prog_state);
1369: $r->rflush();
1370: return;
1371: }
1.12 matthew 1372:
1.38 matthew 1373: ####################################################
1374: ####################################################
1375:
1376: =pod
1377:
1378: =item &submission_report_form
1379:
1380: Input: The originating reportSelected value for the current stats page.
1381:
1382: Output: Scalar containing HTML with needed form elements and a link to
1383: the student submission reports page.
1384:
1385: =cut
1386:
1387: ####################################################
1388: ####################################################
1389: sub submission_report_form {
1390: my ($original_report) = @_;
1391: # Note: In the link below we change the reportSelected value. If
1392: # the user hits the 'back' button on the browser after getting their
1393: # student submissions report, this value may still be around. So we
1394: # output a script block to set it properly. If the $original_report
1395: # value is unset, you are just asking for trouble.
1396: if (! defined($original_report)) {
1397: &Apache::lonnet::logthis
1398: ('someone called lonstathelpers::submission_report_form without '.
1399: ' enough input.');
1400: }
1401: my $html = $/.
1402: '<script type="Text/JavaScript">'.
1403: "document.Statistics.reportSelected.value='$original_report';".
1404: '</script>'.
1405: '<input type="hidden" name="correctans" value="true" />'.
1406: '<input type="hidden" name="prob_status" value="true" />'.
1407: '<input type="hidden" name="all_sub" value="true" />';
1408: my $output_selector = $/.'<select name="output">'.$/;
1409: foreach ('HTML','Excel','CSV') {
1410: $output_selector .= ' <option value="'.lc($_).'"';
1.46 albertel 1411: if ($env{'form.output'} eq lc($_)) {
1.38 matthew 1412: $output_selector .= ' selected ';
1413: }
1414: $output_selector .='>'.&mt($_).'</option>'.$/;
1415: }
1416: $output_selector .= '</select>'.$/;
1417: my $link = '<a href="javascript:'.
1418: q{document.Statistics.reportSelected.value='student_submission_reports';}.
1419: 'document.Statistics.submit();">';
1420: $html.= &mt('View data as [_1] [_2]go[_3]',$output_selector,
1421: $link,'</a>').$/;
1422: return $html
1423: }
1.12 matthew 1424:
1425: ####################################################
1426: ####################################################
1427:
1428: =pod
1429:
1.2 matthew 1430: =back
1431:
1432: =cut
1433:
1434: ####################################################
1435: ####################################################
1.1 matthew 1436:
1437: 1;
1438:
1439: __END__
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to lonstathelpers.pm CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / loncom / interface / statistics