Annotation of loncom/interface/statistics/lonstathelpers.pm, revision 1.53
1.1 matthew 1: # The LearningOnline Network with CAPA
2: #
1.53 ! www 3: # $Id: lonstathelpers.pm,v 1.52 2006/02/14 16:05:46 albertel Exp $
1.1 matthew 4: #
5: # Copyright Michigan State University Board of Trustees
6: #
7: # This file is part of the LearningOnline Network with CAPA (LON-CAPA).
8: #
9: # LON-CAPA is free software; you can redistribute it and/or modify
10: # it under the terms of the GNU General Public License as published by
11: # the Free Software Foundation; either version 2 of the License, or
12: # (at your option) any later version.
13: #
14: # LON-CAPA is distributed in the hope that it will be useful,
15: # but WITHOUT ANY WARRANTY; without even the implied warranty of
16: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17: # GNU General Public License for more details.
18: #
19: # You should have received a copy of the GNU General Public License
20: # along with LON-CAPA; if not, write to the Free Software
21: # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22: #
23: # /home/httpd/html/adm/gpl.txt
24: #
25: # http://www.lon-capa.org/
26: #
27: ####################################################
28: ####################################################
29:
30: =pod
31:
32: =head1 NAME
33:
34: Apache::lonstathelpers - helper routines used by statistics
35:
36: =head1 SYNOPSIS
37:
38: This module provides a place to consolidate much of the statistics
39: routines that are needed across multiple statistics functions.
40:
41: =head1 OVERVIEW
42:
43: =over 4
44:
45: =cut
46:
47: ####################################################
48: ####################################################
49: package Apache::lonstathelpers;
50:
51: use strict;
1.46 albertel 52: use Apache::lonnet;
1.1 matthew 53: use Apache::loncommon();
54: use Apache::lonhtmlcommon();
55: use Apache::loncoursedata();
56: use Apache::lonstatistics;
57: use Apache::lonlocal;
58: use HTML::Entities();
59: use Time::Local();
60: use Spreadsheet::WriteExcel();
1.8 matthew 61: use GDBM_File;
62: use Storable qw(freeze thaw);
1.53 ! www 63: use lib '/home/httpd/lib/perl/';
! 64: use LONCAPA;
! 65:
1.1 matthew 66:
67: ####################################################
68: ####################################################
69:
70: =pod
71:
72: =item &render_resource($resource)
73:
1.42 matthew 74: Input: a navmaps resource
1.1 matthew 75:
76: Retunrs: a scalar containing html for a rendering of the problem
77: within a table.
78:
79: =cut
80:
81: ####################################################
82: ####################################################
83: sub render_resource {
84: my ($resource) = @_;
85: ##
86: ## Render the problem
1.43 matthew 87: my ($base) = ($resource->src =~ m|^(.*/)[^/]*$|);
88: $base="http://".$ENV{'SERVER_NAME'}.$base;
1.53 ! www 89: my ($src,$symb)=($resource->src,&escape($resource->symb));
1.40 matthew 90: my $rendered_problem = &Apache::lonnet::ssi_body($src.'?symb='.$symb);
1.1 matthew 91: $rendered_problem =~ s/<\s*form\s*/<nop /g;
92: $rendered_problem =~ s|(<\s*/form\s*>)|<\/nop>|g;
93: return '<table bgcolor="ffffff"><tr><td>'.
94: '<base href="'.$base.'" />'.
95: $rendered_problem.
96: '</td></tr></table>';
97: }
1.2 matthew 98:
99: ####################################################
100: ####################################################
101:
102: =pod
103:
1.40 matthew 104: =item &get_resources
105:
106: =cut
107:
108: ####################################################
109: ####################################################
110: sub get_resources {
111: my ($navmap,$sequence) = @_;
112: my @resources = $navmap->retrieveResources($sequence,
113: sub { shift->is_problem(); },
114: 0,0,0);
115: return @resources;
116: }
117:
118: ####################################################
119: ####################################################
120:
121: =pod
122:
123: =item &problem_selector($AcceptedResponseTypes)
1.2 matthew 124:
125: Input: scalar containing regular expression which matches response
126: types to show. '.' will yield all, '(option|radiobutton)' will match
127: all option response and radiobutton problems.
128:
129: Returns: A string containing html for a table which lists the sequences
130: and their contents. A radiobutton is provided for each problem.
1.14 matthew 131: Skips 'survey' problems.
1.2 matthew 132:
133: =cut
134:
135: ####################################################
136: ####################################################
1.40 matthew 137: sub problem_selector {
1.50 matthew 138: my ($AcceptedResponseTypes,$sequence_addendum) = @_;
1.2 matthew 139: my $Str;
140: $Str = "\n<table>\n";
1.27 matthew 141: my $rb_count =0;
1.40 matthew 142: my ($navmap,@sequences) =
143: &Apache::lonstatistics::selected_sequences_with_assessments('all');
144: return $navmap if (! ref($navmap)); # error
145: foreach my $seq (@sequences) {
1.2 matthew 146: my $seq_str = '';
1.40 matthew 147: foreach my $res (&get_resources($navmap,$seq)) {
148: foreach my $part (@{$res->parts}) {
149: my @response_ids = $res->responseIds($part);
150: my @response_types = $res->responseType($part);
151: for (my $i=0;$i<scalar(@response_types);$i++){
152: my $respid = $response_ids[$i];
153: my $resptype = $response_types[$i];
1.2 matthew 154: if ($resptype =~ m/$AcceptedResponseTypes/) {
1.40 matthew 155: my $value = &make_target_id({symb=>$res->symb,
1.2 matthew 156: part=>$part,
157: respid=>$respid,
158: resptype=>$resptype});
159: my $checked = '';
1.46 albertel 160: if ($env{'form.problemchoice'} eq $value) {
1.2 matthew 161: $checked = 'checked ';
162: }
1.40 matthew 163: my $title = $res->compTitle;
1.2 matthew 164: if (! defined($title) || $title eq '') {
1.40 matthew 165: ($title) = ($res->src =~ m:/([^/]*)$:);
1.2 matthew 166: }
1.27 matthew 167: $seq_str .= '<tr>'.
168: qq{<td><input type="radio" id="$rb_count" name="problemchoice" value="$value" $checked /></td>}.
169: '<td><label for="'.$rb_count.'">'.$resptype.'</label></td>'.
170: '<td><label for="'.$rb_count.'">'.$title.'</label>';
1.40 matthew 171: if (scalar(@response_ids) > 1) {
1.2 matthew 172: $seq_str .= &mt('response').' '.$respid;
173: }
1.41 matthew 174: my $link = $res->src.'?symb='.
1.53 ! www 175: &escape($res->symb);
1.27 matthew 176: $seq_str .= (' 'x2).
1.34 matthew 177: qq{<a target="preview" href="$link">view</a>};
1.2 matthew 178: $seq_str .= "</td></tr>\n";
1.27 matthew 179: $rb_count++;
1.2 matthew 180: }
181: }
182: }
183: }
184: if ($seq_str ne '') {
1.50 matthew 185: $Str .= '<tr><td> </td>'.
186: '<td colspan="2"><b>'.$seq->compTitle.'</b></td>'.
1.2 matthew 187: "</tr>\n".$seq_str;
1.50 matthew 188: if (defined($sequence_addendum)) {
189: $Str .= '<tr>'.
190: ('<td> </td>'x2).
191: '<td align="right">'.$sequence_addendum.'</td>'.
192: "</tr>\n";
193: }
1.2 matthew 194: }
195: }
196: $Str .= "</table>\n";
197: return $Str;
198: }
199:
200: ####################################################
201: ####################################################
202:
203: =pod
204:
1.24 matthew 205: =item &MultipleProblemSelector($navmap,$selected,$inputname)
1.21 matthew 206:
207: Generate HTML with checkboxes for problem selection.
208:
209: Input:
210:
211: $navmap: a navmap object. If undef, navmaps will be called to create a
212: new object.
213:
214: $selected: Scalar, Array, or hash reference of currently selected items.
215:
216: $inputname: The name of the form elements to use for the checkboxs.
217:
218: Returns: A string containing html for a table which lists the sequences
219: and their contents. A checkbox is provided for each problem.
220:
221: =cut
222:
223: ####################################################
224: ####################################################
225: sub MultipleProblemSelector {
1.23 matthew 226: my ($navmap,$inputname,$formname)=@_;
1.46 albertel 227: my $cid = $env{'request.course.id'};
1.21 matthew 228: my $Str;
229: # Massage the input as needed.
230: if (! defined($navmap)) {
231: $navmap = Apache::lonnavmaps::navmap->new();
232: if (! defined($navmap)) {
233: $Str .=
234: '<h1>'.&mt('Error: cannot process course structure').'</h1>';
235: return $Str;
236: }
237: }
238: my $selected = {map { ($_,1) } (&get_selected_symbs($inputname))};
239: # Header
240: $Str .= <<"END";
1.25 matthew 241: <script language="JavaScript" type="text/javascript">
242: function checkall(value,seqid) {
1.21 matthew 243: for (i=0; i<document.forms.$formname.elements.length; i++) {
244: ele = document.forms.$formname.elements[i];
245: if (ele.name == '$inputname') {
1.25 matthew 246: if (seqid != null) {
247: itemid = document.forms.$formname.elements[i].id;
248: thing = itemid.split(':');
249: if (thing[0] == seqid) {
250: document.forms.$formname.elements[i].checked=value;
251: }
252: } else {
253: document.forms.$formname.elements[i].checked=value;
254: }
1.21 matthew 255: }
256: }
257: }
258: </script>
259: END
260: $Str .=
261: '<a href="javascript:checkall(true)">'.&mt('Select All').'</a>'.
262: (' 'x4).
263: '<a href="javascript:checkall(false)">'.&mt('Unselect All').'</a>';
264: $Str .= $/.'<table>'.$/;
265: my $iterator = $navmap->getIterator(undef, undef, undef, 1);
266: my $sequence_string;
1.25 matthew 267: my $seq_id = 0;
1.46 albertel 268: my @Accumulator = (&new_accumulator($env{'course.'.$cid.'.description'},
1.21 matthew 269: '',
270: '',
1.25 matthew 271: $seq_id++,
1.21 matthew 272: $inputname));
273: my @Sequence_Data;
274: while (my $curRes = $iterator->next()) {
275: if ($curRes == $iterator->END_MAP) {
276: if (ref($Accumulator[-1]) eq 'CODE') {
1.24 matthew 277: my $old_accumulator = pop(@Accumulator);
278: push(@Sequence_Data,&{$old_accumulator}());
1.21 matthew 279: }
280: } elsif ($curRes == $iterator->BEGIN_MAP) {
281: # Not much to do here.
282: }
283: next if (! ref($curRes));
284: if ($curRes->is_map) {
1.24 matthew 285: push(@Accumulator,&new_accumulator($curRes->compTitle,
1.21 matthew 286: $curRes->src,
287: $curRes->symb,
1.25 matthew 288: $seq_id++,
1.21 matthew 289: $inputname));
290: } elsif ($curRes->is_problem) {
291: if (@Accumulator && $Accumulator[-1] ne '') {
292: &{$Accumulator[-1]}($curRes,
293: exists($selected->{$curRes->symb}));
294: }
295: }
296: }
297: my $course_seq = pop(@Sequence_Data);
298: foreach my $seq ($course_seq,@Sequence_Data) {
299: #my $seq = pop(@Sequence_Data);
300: next if (! defined($seq) || ref($seq) ne 'HASH');
301: $Str.= '<tr><td colspan="2">'.
1.25 matthew 302: '<b>'.$seq->{'title'}.'</b>'.(' 'x2).
303: '<a href="javascript:checkall(true,'.$seq->{'id'}.')">'.
304: &mt('Select').'</a>'.(' 'x2).
305: '<a href="javascript:checkall(false,'.$seq->{'id'}.')">'.
306: &mt('Unselect').'</a>'.(' 'x2).
1.21 matthew 307: '</td></tr>'.$/;
308: $Str.= $seq->{'html'};
309: }
310: $Str .= '</table>'.$/;
311: return $Str;
312: }
313:
314: sub new_accumulator {
1.25 matthew 315: my ($title,$src,$symb,$seq_id,$inputname) = @_;
1.21 matthew 316: my $target;
1.25 matthew 317: my $item_id=0;
1.21 matthew 318: return
319: sub {
320: if (@_) {
321: my ($res,$checked) = @_;
1.23 matthew 322: $target.='<tr><td><label>'.
1.21 matthew 323: '<input type="checkbox" name="'.$inputname.'" ';
324: if ($checked) {
325: $target .= 'checked ';
326: }
1.25 matthew 327: $target .= 'id="'.$seq_id.':'.$item_id++.'" ';
1.21 matthew 328: $target.=
1.53 ! www 329: 'value="'.&escape($res->symb).'" />'.
1.26 matthew 330: ' '.$res->compTitle.'</label>'.
331: (' 'x2).'<a target="preview" '.
1.34 matthew 332: 'href="'.$res->src.'?symb='.
1.53 ! www 333: &escape($res->symb).'">view</a>'.
1.26 matthew 334: '</td></tr>'.$/;
1.21 matthew 335: } else {
336: if (defined($target)) {
337: return { title => $title,
338: symb => $symb,
339: src => $src,
1.25 matthew 340: id => $seq_id,
1.21 matthew 341: html => $target, };
342: }
343: return undef;
344: }
345: };
346: }
347:
348: sub get_selected_symbs {
349: my ($inputfield) = @_;
350: my $field = 'form.'.$inputfield;
1.48 matthew 351: my @symbs = (map {
1.53 ! www 352: &unescape($_);
1.48 matthew 353: } &Apache::loncommon::get_env_multiple($field));
354: return @symbs;
1.21 matthew 355: }
356:
357: ####################################################
358: ####################################################
359:
360: =pod
361:
1.2 matthew 362: =item &make_target_id($target)
363:
364: Inputs: Hash ref with the following entries:
365: $target->{'symb'}, $target->{'part'}, $target->{'respid'},
366: $target->{'resptype'}.
367:
368: Returns: A string, suitable for a form parameter, which uniquely identifies
369: the problem, part, and response to do statistical analysis on.
370:
371: Used by Apache::lonstathelpers::ProblemSelector().
372:
373: =cut
374:
375: ####################################################
376: ####################################################
377: sub make_target_id {
378: my ($target) = @_;
1.53 ! www 379: my $id = &escape($target->{'symb'}).':'.
! 380: &escape($target->{'part'}).':'.
! 381: &escape($target->{'respid'}).':'.
! 382: &escape($target->{'resptype'});
1.2 matthew 383: return $id;
384: }
385:
386: ####################################################
387: ####################################################
388:
389: =pod
390:
391: =item &get_target_from_id($id)
392:
393: Inputs: $id, a scalar string from Apache::lonstathelpers::make_target_id().
394:
395: Returns: A hash reference, $target, containing the following keys:
396: $target->{'symb'}, $target->{'part'}, $target->{'respid'},
397: $target->{'resptype'}.
398:
399: =cut
400:
401: ####################################################
402: ####################################################
403: sub get_target_from_id {
404: my ($id) = @_;
1.21 matthew 405: if (! ref($id)) {
406: my ($symb,$part,$respid,$resptype) = split(':',$id);
1.53 ! www 407: return ({ symb => &unescape($symb),
! 408: part => &unescape($part),
! 409: respid => &unescape($respid),
! 410: resptype => &unescape($resptype)});
1.21 matthew 411: } elsif (ref($id) eq 'ARRAY') {
412: my @Return;
413: foreach my $selected (@$id) {
414: my ($symb,$part,$respid,$resptype) = split(':',$selected);
1.53 ! www 415: push(@Return,{ symb => &unescape($symb),
! 416: part => &unescape($part),
! 417: respid => &unescape($respid),
! 418: resptype => &unescape($resptype)});
1.21 matthew 419: }
420: return \@Return;
421: }
1.2 matthew 422: }
423:
424: ####################################################
425: ####################################################
426:
427: =pod
428:
1.13 matthew 429: =item &get_prev_curr_next($target,$AcceptableResponseTypes,$granularity)
1.2 matthew 430:
431: Determine the problem parts or responses preceeding and following the
432: current resource.
433:
434: Inputs: $target (see &Apache::lonstathelpers::get_target_from_id())
435: $AcceptableResponseTypes, regular expression matching acceptable
436: response types,
1.52 albertel 437: $granularity, either 'part', 'response', 'part_survey', or 'part_task'
1.2 matthew 438:
439: Returns: three hash references, $prev, $curr, $next, which refer to the
440: preceeding, current, or following problem parts or responses, depending
441: on the value of $granularity. Values of undef indicate there is no
442: previous or next part/response. A value of undef for all three indicates
443: there was no match found to the current part/resource.
444:
445: The hash references contain the following keys:
446: symb, part, resource
447:
448: If $granularity eq 'response', the following ADDITIONAL keys will be present:
449: respid, resptype
450:
451: =cut
452:
453: ####################################################
454: ####################################################
455: sub get_prev_curr_next {
456: my ($target,$AcceptableResponseTypes,$granularity) = @_;
457: #
458: # Build an array with the data we need to search through
459: my @Resource;
1.40 matthew 460: my ($navmap,@sequences) =
461: &Apache::lonstatistics::selected_sequences_with_assessments('all');
462: return $navmap if (! ref($navmap));
463: foreach my $seq (@sequences) {
464: my @resources = &get_resources($navmap,$seq);
465: foreach my $res (@resources) {
466: foreach my $part (@{$res->parts}) {
467: if ($res->is_survey($part) && ($granularity eq 'part_survey')){
1.20 matthew 468: push (@Resource,
1.40 matthew 469: { symb => $res->symb,
1.20 matthew 470: part => $part,
471: resource => $res,
472: } );
1.52 albertel 473: } elsif ($res->is_task($part) && ($granularity eq 'part_task')){
474: push (@Resource,
475: { symb => $res->symb,
476: part => $part,
477: resource => $res,
478: } );
1.13 matthew 479: } elsif ($granularity eq 'part') {
1.2 matthew 480: push (@Resource,
1.40 matthew 481: { symb => $res->symb,
1.2 matthew 482: part => $part,
483: resource => $res,
484: } );
485: } elsif ($granularity eq 'response') {
1.40 matthew 486: my @response_ids = $res->responseIds($part);
487: my @response_types = $res->responseType($part);
1.2 matthew 488: for (my $i=0;
1.40 matthew 489: $i<scalar(@response_ids);
1.2 matthew 490: $i++){
1.40 matthew 491: my $respid = $response_ids[$i];
492: my $resptype = $response_types[$i];
1.2 matthew 493: next if ($resptype !~ m/$AcceptableResponseTypes/);
494: push (@Resource,
1.40 matthew 495: { symb => $res->symb,
1.2 matthew 496: part => $part,
1.40 matthew 497: respid => $respid,
498: resptype => $resptype,
1.2 matthew 499: resource => $res,
500: } );
501: }
502: }
503: }
504: }
505: }
506: #
507: # Get the index of the current situation
508: my $curr_idx;
509: for ($curr_idx=0;$curr_idx<$#Resource;$curr_idx++) {
510: my $curr_item = $Resource[$curr_idx];
1.52 albertel 511: if ($granularity =~ /^(part|part_survey|part_task)$/) {
1.2 matthew 512: if ($curr_item->{'symb'} eq $target->{'symb'} &&
513: $curr_item->{'part'} eq $target->{'part'}) {
514: last;
515: }
516: } elsif ($granularity eq 'response') {
517: if ($curr_item->{'symb'} eq $target->{'symb'} &&
518: $curr_item->{'part'} eq $target->{'part'} &&
519: $curr_item->{'respid'} eq $target->{'respid'} &&
520: $curr_item->{'resptype'} eq $target->{'resptype'}) {
521: last;
522: }
523: }
524: }
525: my $curr_item = $Resource[$curr_idx];
1.52 albertel 526: if ($granularity =~ /^(part|part_survey|part_task)$/) {
1.2 matthew 527: if ($curr_item->{'symb'} ne $target->{'symb'} ||
528: $curr_item->{'part'} ne $target->{'part'}) {
529: # bogus symb - return nothing
530: return (undef,undef,undef);
531: }
532: } elsif ($granularity eq 'response') {
533: if ($curr_item->{'symb'} ne $target->{'symb'} ||
534: $curr_item->{'part'} ne $target->{'part'} ||
535: $curr_item->{'respid'} ne $target->{'respid'} ||
536: $curr_item->{'resptype'} ne $target->{'resptype'}){
537: # bogus symb - return nothing
538: return (undef,undef,undef);
539: }
540: }
541: #
542: # Now just pick up the data we need
543: my ($prev,$curr,$next);
544: if ($curr_idx == 0) {
545: $prev = undef;
546: $curr = $Resource[$curr_idx ];
547: $next = $Resource[$curr_idx+1];
548: } elsif ($curr_idx == $#Resource) {
549: $prev = $Resource[$curr_idx-1];
550: $curr = $Resource[$curr_idx ];
551: $next = undef;
552: } else {
553: $prev = $Resource[$curr_idx-1];
554: $curr = $Resource[$curr_idx ];
555: $next = $Resource[$curr_idx+1];
556: }
1.40 matthew 557: return ($navmap,$prev,$curr,$next);
1.4 matthew 558: }
559:
1.9 matthew 560:
561: #####################################################
562: #####################################################
563:
564: =pod
565:
566: =item GetStudentAnswers($r,$problem,$Students)
567:
568: Determines the correct answer for a set of students on a given problem.
569: The students answers are stored in the student hashes pointed to by the
570: array @$Students under the key 'answer'.
571:
572: Inputs: $r
573: $problem: hash reference containing the keys 'resource', 'part', and 'respid'.
574: $Students: reference to array containing student hashes (need 'username',
575: 'domain').
576:
577: Returns: nothing
578:
579: =cut
580:
581: #####################################################
582: #####################################################
583: sub GetStudentAnswers {
1.12 matthew 584: my ($r,$problem,$Students,$formname,$inputname) = @_;
1.31 matthew 585: my %answers;
1.12 matthew 586: my $status_type;
587: if (defined($formname)) {
588: $status_type = 'inline';
589: } else {
590: $status_type = 'popup';
591: }
1.9 matthew 592: my $c = $r->connection();
593: my %Answers;
594: my ($resource,$partid,$respid) = ($problem->{'resource'},
595: $problem->{'part'},
596: $problem->{'respid'});
597: # Read in the cache (if it exists) before we start timing things.
598: &Apache::lonstathelpers::ensure_proper_cache($resource->{'symb'});
599: # Open progress window
600: my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin
601: ($r,'Student Answer Compilation Status',
1.12 matthew 602: 'Student Answer Compilation Progress', scalar(@$Students),
603: $status_type,undef,$formname,$inputname);
1.9 matthew 604: $r->rflush();
605: foreach my $student (@$Students) {
606: last if ($c->aborted());
607: my $sname = $student->{'username'};
608: my $sdom = $student->{'domain'};
1.30 matthew 609: my $answer = &Apache::lonstathelpers::get_student_answer
1.9 matthew 610: ($resource,$sname,$sdom,$partid,$respid);
611: &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,
612: &mt('last student'));
1.31 matthew 613: $answers{$answer}++;
1.9 matthew 614: $student->{'answer'} = $answer;
615: }
1.29 matthew 616: &Apache::lonstathelpers::write_analysis_cache();
1.9 matthew 617: return if ($c->aborted());
618: $r->rflush();
619: # close progress window
620: &Apache::lonhtmlcommon::Close_PrgWin($r,\%prog_state);
1.31 matthew 621: return \%answers;
1.9 matthew 622: }
1.4 matthew 623:
624: #####################################################
625: #####################################################
626:
627: =pod
628:
629: =item analyze_problem_as_student
630:
1.30 matthew 631: Analyzes a homework problem for a student
1.4 matthew 632:
633: Inputs: $resource: a resource object
634: $sname, $sdom, $partid, $respid
635:
1.30 matthew 636: Returns: the problem analysis hash
1.6 matthew 637:
1.4 matthew 638: =cut
639:
640: #####################################################
641: #####################################################
642: sub analyze_problem_as_student {
1.30 matthew 643: my ($resource,$sname,$sdom) = @_;
1.22 matthew 644: if (ref($resource) ne 'HASH') {
645: my $res = $resource;
646: $resource = { 'src' => $res->src,
647: 'symb' => $res->symb,
648: 'parts' => $res->parts };
649: foreach my $part (@{$resource->{'parts'}}) {
650: $resource->{'partdata'}->{$part}->{'ResponseIds'}=
651: [$res->responseIds($part)];
652: }
653: }
1.4 matthew 654: my $url = $resource->{'src'};
655: my $symb = $resource->{'symb'};
1.29 matthew 656: my $analysis = &get_from_analysis_cache($sname,$sdom,$symb);
657: if (! defined($analysis)) {
1.46 albertel 658: my $courseid = $env{'request.course.id'};
1.29 matthew 659: my $Answ=&Apache::lonnet::ssi($url,('grade_target' => 'analyze',
660: 'grade_domain' => $sdom,
661: 'grade_username' => $sname,
662: 'grade_symb' => $symb,
663: 'grade_courseid' => $courseid));
664: (my $garbage,$analysis)=split(/_HASH_REF__/,$Answ,2);
665: &store_analysis($sname,$sdom,$symb,$analysis);
666: }
667: my %Answer=&Apache::lonnet::str2hash($analysis);
1.6 matthew 668: #
1.30 matthew 669: return \%Answer;
670: }
671:
672: #####################################################
673: #####################################################
674:
675: =pod
676:
677: =item get_student_answer
678:
679: Analyzes a homework problem for a particular student and returns the correct
680: answer. Attempts to put together an answer for problem types
681: that do not natively support it.
682:
683: Inputs: $resource: a resource object (from navmaps or hash from loncoursedata)
684: $sname, $sdom, $partid, $respid
685:
686: Returns: $answer
687:
688: If $partid and $respid are specified, $answer is simply a scalar containing
689: the correct answer for the response.
690:
691: If $partid or $respid are undefined, $answer will be a hash reference with
692: keys $partid.'.'.$respid.'.answer'.
693:
694: =cut
695:
696: #####################################################
697: #####################################################
698: sub get_student_answer {
699: my ($resource,$sname,$sdom,$partid,$respid) = @_;
700: #
701: if (ref($resource) ne 'HASH') {
702: my $res = $resource;
703: $resource = { 'src' => $res->src,
704: 'symb' => $res->symb,
705: 'parts' => $res->parts };
706: foreach my $part (@{$resource->{'parts'}}) {
707: $resource->{'partdata'}->{$part}->{'ResponseIds'}=
708: [$res->responseIds($part)];
709: }
710: }
711: #
712: my $analysis =
713: &analyze_problem_as_student($resource,$sname,$sdom);
1.29 matthew 714: my $answer;
1.8 matthew 715: foreach my $partid (@{$resource->{'parts'}}) {
1.6 matthew 716: my $partdata = $resource->{'partdata'}->{$partid};
717: foreach my $respid (@{$partdata->{'ResponseIds'}}) {
718: my $prefix = $partid.'.'.$respid;
719: my $key = $prefix.'.answer';
1.30 matthew 720: $answer->{$partid}->{$respid} =
721: &get_answer($prefix,$key,%$analysis);
1.6 matthew 722: }
1.8 matthew 723: }
1.30 matthew 724: my $returnvalue;
1.8 matthew 725: if (! defined($partid)) {
726: $returnvalue = $answer;
727: } elsif (! defined($respid)) {
728: $returnvalue = $answer->{$partid};
1.6 matthew 729: } else {
1.8 matthew 730: $returnvalue = $answer->{$partid}->{$respid};
1.6 matthew 731: }
732: return $returnvalue;
733: }
734:
735: sub get_answer {
736: my ($prefix,$key,%Answer) = @_;
737: my $returnvalue;
1.4 matthew 738: if (exists($Answer{$key})) {
739: my $student_answer = $Answer{$key}->[0];
740: if (! defined($student_answer)) {
741: $student_answer = $Answer{$key}->[1];
742: }
743: $returnvalue = $student_answer;
744: } else {
745: if (exists($Answer{$prefix.'.shown'})) {
746: # The response has foils
747: my %values;
748: while (my ($k,$v) = each(%Answer)) {
749: next if ($k !~ /^$prefix\.foil\.(value|area)\.(.*)$/);
750: my $foilname = $2;
751: $values{$foilname}=$v;
752: }
753: foreach my $foil (@{$Answer{$prefix.'.shown'}}) {
754: if (ref($values{$foil}) eq 'ARRAY') {
1.10 albertel 755: $returnvalue.=&HTML::Entities::encode($foil,'<>&"').'='.
756: join(',',map {&HTML::Entities::encode($_,'<>&"')} @{$values{$foil}}).'&';
1.4 matthew 757: } else {
1.10 albertel 758: $returnvalue.=&HTML::Entities::encode($foil,'<>&"').'='.
759: &HTML::Entities::encode($values{$foil},'<>&"').'&';
1.4 matthew 760: }
761: }
762: $returnvalue =~ s/ /\%20/g;
763: chop ($returnvalue);
764: }
765: }
766: return $returnvalue;
767: }
1.8 matthew 768:
769: #####################################################
770: #####################################################
771:
772: =pod
773:
774: =item Caching routines
775:
776: =over 4
777:
1.29 matthew 778: =item &load_analysis_cache($symb)
1.8 matthew 779:
780: Loads the cache for the given symb into memory from disk.
781: Requires the cache filename be set.
782: Only should be called by &ensure_proper_cache.
783:
784: =cut
785:
786: #####################################################
787: #####################################################
788: {
789: my $cache_filename = undef;
790: my $current_symb = undef;
791: my %cache;
792:
1.29 matthew 793: sub load_analysis_cache {
1.8 matthew 794: my ($symb) = @_;
795: return if (! defined($cache_filename));
796: if (! defined($current_symb) || $current_symb ne $symb) {
797: undef(%cache);
798: my $storedstring;
799: my %cache_db;
800: if (tie(%cache_db,'GDBM_File',$cache_filename,&GDBM_READER(),0640)) {
1.53 ! www 801: $storedstring = $cache_db{&escape($symb)};
1.8 matthew 802: untie(%cache_db);
803: }
804: if (defined($storedstring)) {
805: %cache = %{thaw($storedstring)};
806: }
807: }
808: return;
809: }
810:
811: #####################################################
812: #####################################################
813:
814: =pod
815:
1.29 matthew 816: =item &get_from_analysis_cache($sname,$sdom,$symb,$partid,$respid)
1.8 matthew 817:
818: Returns the appropriate data from the cache, or undef if no data exists.
819:
820: =cut
821:
822: #####################################################
823: #####################################################
1.29 matthew 824: sub get_from_analysis_cache {
825: my ($sname,$sdom,$symb) = @_;
1.8 matthew 826: &ensure_proper_cache($symb);
827: my $returnvalue;
1.29 matthew 828: if (exists($cache{$sname.':'.$sdom})) {
829: $returnvalue = $cache{$sname.':'.$sdom};
1.8 matthew 830: } else {
831: $returnvalue = undef;
832: }
833: return $returnvalue;
834: }
835:
836: #####################################################
837: #####################################################
838:
839: =pod
840:
1.29 matthew 841: =item &write_analysis_cache($symb)
1.8 matthew 842:
843: Writes the in memory cache to disk so that it can be read in with
1.29 matthew 844: &load_analysis_cache($symb).
1.8 matthew 845:
846: =cut
847:
848: #####################################################
849: #####################################################
1.29 matthew 850: sub write_analysis_cache {
1.8 matthew 851: return if (! defined($current_symb) || ! defined($cache_filename));
852: my %cache_db;
1.53 ! www 853: my $key = &escape($current_symb);
1.8 matthew 854: if (tie(%cache_db,'GDBM_File',$cache_filename,&GDBM_WRCREAT(),0640)) {
855: my $storestring = freeze(\%cache);
856: $cache_db{$key}=$storestring;
857: $cache_db{$key.'.time'}=time;
858: untie(%cache_db);
859: }
860: undef(%cache);
861: undef($current_symb);
862: undef($cache_filename);
863: return;
864: }
865:
866: #####################################################
867: #####################################################
868:
869: =pod
870:
871: =item &ensure_proper_cache($symb)
872:
873: Called to make sure we have the proper cache set up. This is called
1.29 matthew 874: prior to every analysis lookup.
1.8 matthew 875:
876: =cut
877:
878: #####################################################
879: #####################################################
880: sub ensure_proper_cache {
881: my ($symb) = @_;
1.46 albertel 882: my $cid = $env{'request.course.id'};
1.8 matthew 883: my $new_filename = '/home/httpd/perl/tmp/'.
1.29 matthew 884: 'problemanalysis_'.$cid.'_analysis_cache.db';
1.8 matthew 885: if (! defined($cache_filename) ||
886: $cache_filename ne $new_filename ||
887: ! defined($current_symb) ||
888: $current_symb ne $symb) {
889: $cache_filename = $new_filename;
890: # Notice: $current_symb is not set to $symb until after the cache is
1.29 matthew 891: # loaded. This is what tells &load_analysis_cache to load in a new
1.8 matthew 892: # symb cache.
1.29 matthew 893: &load_analysis_cache($symb);
1.8 matthew 894: $current_symb = $symb;
895: }
896: }
897:
898: #####################################################
899: #####################################################
900:
901: =pod
902:
1.29 matthew 903: =item &store_analysis($sname,$sdom,$symb,$partid,$respid,$dataset)
1.8 matthew 904:
1.29 matthew 905: Stores the analysis data in the in memory cache.
1.8 matthew 906:
907: =cut
908:
909: #####################################################
910: #####################################################
1.29 matthew 911: sub store_analysis {
912: my ($sname,$sdom,$symb,$dataset) = @_;
1.8 matthew 913: return if ($symb ne $current_symb);
1.29 matthew 914: $cache{$sname.':'.$sdom}=$dataset;
1.8 matthew 915: return;
916: }
917:
918: }
919: #####################################################
920: #####################################################
921:
922: =pod
923:
924: =back
925:
926: =cut
927:
928: #####################################################
929: #####################################################
1.4 matthew 930:
931: ##
932: ## The following is copied from datecalc1.pl, part of the
933: ## Spreadsheet::WriteExcel CPAN module.
934: ##
935: ##
936: ######################################################################
937: #
938: # Demonstration of writing date/time cells to Excel spreadsheets,
939: # using UNIX/Perl time as source of date/time.
940: #
941: # Copyright 2000, Andrew Benham, adsb@bigfoot.com
942: #
943: ######################################################################
944: #
945: # UNIX/Perl time is the time since the Epoch (00:00:00 GMT, 1 Jan 1970)
946: # measured in seconds.
947: #
948: # An Excel file can use exactly one of two different date/time systems.
949: # In these systems, a floating point number represents the number of days
950: # (and fractional parts of the day) since a start point. The floating point
951: # number is referred to as a 'serial'.
952: # The two systems ('1900' and '1904') use different starting points:
953: # '1900'; '1.00' is 1 Jan 1900 BUT 1900 is erroneously regarded as
954: # a leap year - see:
955: # http://support.microsoft.com/support/kb/articles/Q181/3/70.asp
956: # for the excuse^H^H^H^H^H^Hreason.
957: # '1904'; '1.00' is 2 Jan 1904.
958: #
959: # The '1904' system is the default for Apple Macs. Windows versions of
960: # Excel have the option to use the '1904' system.
961: #
962: # Note that Visual Basic's "DateSerial" function does NOT erroneously
963: # regard 1900 as a leap year, and thus its serials do not agree with
964: # the 1900 serials of Excel for dates before 1 Mar 1900.
965: #
966: # Note that StarOffice (at least at version 5.2) does NOT erroneously
967: # regard 1900 as a leap year, and thus its serials do not agree with
968: # the 1900 serials of Excel for dates before 1 Mar 1900.
969: #
970: ######################################################################
971: #
972: # Calculation description
973: # =======================
974: #
975: # 1900 system
976: # -----------
977: # Unix time is '0' at 00:00:00 GMT 1 Jan 1970, i.e. 70 years after 1 Jan 1900.
978: # Of those 70 years, 17 (1904,08,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68)
979: # were leap years with an extra day.
980: # Thus there were 17 + 70*365 days = 25567 days between 1 Jan 1900 and
981: # 1 Jan 1970.
982: # In the 1900 system, '1' is 1 Jan 1900, but as 1900 was not a leap year
983: # 1 Jan 1900 should really be '2', so 1 Jan 1970 is '25569'.
984: #
985: # 1904 system
986: # -----------
987: # Unix time is '0' at 00:00:00 GMT 1 Jan 1970, i.e. 66 years after 1 Jan 1904.
988: # Of those 66 years, 17 (1904,08,12,16,20,24,28,32,36,40,44,48,52,56,60,64,68)
989: # were leap years with an extra day.
990: # Thus there were 17 + 66*365 days = 24107 days between 1 Jan 1904 and
991: # 1 Jan 1970.
992: # In the 1904 system, 2 Jan 1904 being '1', 1 Jan 1970 is '24107'.
993: #
994: ######################################################################
995: #
996: # Copyright (c) 2000, Andrew Benham.
997: # This program is free software. It may be used, redistributed and/or
998: # modified under the same terms as Perl itself.
999: #
1000: # Andrew Benham, adsb@bigfoot.com
1001: # London, United Kingdom
1002: # 11 Nov 2000
1003: #
1004: ######################################################################
1005: #-----------------------------------------------------------
1006: # calc_serial()
1007: #
1008: # Called with (up to) 2 parameters.
1009: # 1. Unix timestamp. If omitted, uses current time.
1010: # 2. GMT flag. Set to '1' to return serial in GMT.
1011: # If omitted, returns serial in appropriate timezone.
1012: #
1013: # Returns date/time serial according to $DATE_SYSTEM selected
1014: #-----------------------------------------------------------
1015: sub calc_serial {
1016: # Use 1900 date system on all platforms other than Apple Mac (for which
1017: # use 1904 date system).
1018: my $DATE_SYSTEM = ($^O eq 'MacOS') ? 1 : 0;
1019: my $time = (defined $_[0]) ? $_[0] : time();
1020: my $gmtflag = (defined $_[1]) ? $_[1] : 0;
1021: #
1022: # Divide timestamp by number of seconds in a day.
1023: # This gives a date serial with '0' on 1 Jan 1970.
1024: my $serial = $time / 86400;
1025: #
1026: # Adjust the date serial by the offset appropriate to the
1027: # currently selected system (1900/1904).
1028: if ($DATE_SYSTEM == 0) { # use 1900 system
1029: $serial += 25569;
1030: } else { # use 1904 system
1031: $serial += 24107;
1032: }
1033: #
1034: unless ($gmtflag) {
1035: # Now have a 'raw' serial with the right offset. But this
1036: # gives a serial in GMT, which is false unless the timezone
1037: # is GMT. We need to adjust the serial by the appropriate
1038: # timezone offset.
1039: # Calculate the appropriate timezone offset by seeing what
1040: # the differences between localtime and gmtime for the given
1041: # time are.
1042: #
1043: my @gmtime = gmtime($time);
1044: my @ltime = localtime($time);
1045: #
1046: # For the first 7 elements of the two arrays, adjust the
1047: # date serial where the elements differ.
1048: for (0 .. 6) {
1049: my $diff = $ltime[$_] - $gmtime[$_];
1050: if ($diff) {
1051: $serial += _adjustment($diff,$_);
1052: }
1053: }
1054: }
1055: #
1056: # Perpetuate the error that 1900 was a leap year by decrementing
1057: # the serial if we're using the 1900 system and the date is prior to
1058: # 1 Mar 1900. This has the effect of making serial value '60'
1059: # 29 Feb 1900.
1060: #
1061: # This fix only has any effect if UNIX/Perl time on the platform
1062: # can represent 1900. Many can't.
1063: #
1064: unless ($DATE_SYSTEM) {
1065: $serial-- if ($serial < 61); # '61' is 1 Mar 1900
1066: }
1067: return $serial;
1068: }
1069:
1070: sub _adjustment {
1071: # Based on the difference in the localtime/gmtime array elements
1072: # number, return the adjustment required to the serial.
1073: #
1074: # We only look at some elements of the localtime/gmtime arrays:
1075: # seconds unlikely to be different as all known timezones
1076: # have an offset of integral multiples of 15 minutes,
1077: # but it's easy to do.
1078: # minutes will be different for timezone offsets which are
1079: # not an exact number of hours.
1080: # hours very likely to be different.
1081: # weekday will differ when localtime/gmtime difference
1082: # straddles midnight.
1083: #
1084: # Assume that difference between localtime and gmtime is less than
1085: # 5 days, then don't have to do maths for day of month, month number,
1086: # year number, etc...
1087: #
1088: my ($delta,$element) = @_;
1089: my $adjust = 0;
1090: #
1091: if ($element == 0) { # Seconds
1092: $adjust = $delta/86400; # 60 * 60 * 24
1093: } elsif ($element == 1) { # Minutes
1094: $adjust = $delta/1440; # 60 * 24
1095: } elsif ($element == 2) { # Hours
1096: $adjust = $delta/24; # 24
1097: } elsif ($element == 6) { # Day of week number
1098: # Catch difference straddling Sat/Sun in either direction
1099: $delta += 7 if ($delta < -4);
1100: $delta -= 7 if ($delta > 4);
1101: #
1102: $adjust = $delta;
1103: }
1104: return $adjust;
1105: }
1106:
1107: ###########################################################
1108: ###########################################################
1109:
1110: =pod
1111:
1112: =item get_problem_data
1113:
1114: Returns a data structure describing the problem.
1115:
1116: Inputs: $url
1117:
1118: Returns: %Partdata
1119:
1120: =cut
1121:
1122: ## note: we must force each foil and option to not begin or end with
1123: ## spaces as they are stored without such data.
1124: ##
1125: ###########################################################
1126: ###########################################################
1127: sub get_problem_data {
1128: my ($url) = @_;
1129: my $Answ=&Apache::lonnet::ssi($url,('grade_target' => 'analyze'));
1130: (my $garbage,$Answ)=split(/_HASH_REF__/,$Answ,2);
1131: my %Answer;
1132: %Answer=&Apache::lonnet::str2hash($Answ);
1133: my %Partdata;
1134: foreach my $part (@{$Answer{'parts'}}) {
1135: while (my($key,$value) = each(%Answer)) {
1136: #
1137: # Logging code:
1.7 matthew 1138: if (0) {
1.4 matthew 1139: &Apache::lonnet::logthis($part.' got key "'.$key.'"');
1140: if (ref($value) eq 'ARRAY') {
1141: &Apache::lonnet::logthis(' @'.join(',',@$value));
1142: } else {
1143: &Apache::lonnet::logthis(' '.$value);
1144: }
1145: }
1146: # End of logging code
1.51 albertel 1147: next if ($key !~ /^\Q$part\E/);
1148: $key =~ s/^\Q$part\E\.//;
1.4 matthew 1149: if (ref($value) eq 'ARRAY') {
1150: if ($key eq 'options') {
1151: $Partdata{$part}->{'_Options'}=$value;
1152: } elsif ($key eq 'concepts') {
1153: $Partdata{$part}->{'_Concepts'}=$value;
1.28 matthew 1154: } elsif ($key eq 'items') {
1155: $Partdata{$part}->{'_Items'}=$value;
1.4 matthew 1156: } elsif ($key =~ /^concept\.(.*)$/) {
1157: my $concept = $1;
1158: foreach my $foil (@$value) {
1159: $Partdata{$part}->{'_Foils'}->{$foil}->{'_Concept'}=
1160: $concept;
1161: }
1.32 matthew 1162: } elsif ($key =~ /^(unit|incorrect|answer|ans_low|ans_high|str_type)$/) {
1.4 matthew 1163: $Partdata{$part}->{$key}=$value;
1164: }
1165: } else {
1166: if ($key=~ /^foil\.text\.(.*)$/) {
1167: my $foil = $1;
1168: $Partdata{$part}->{'_Foils'}->{$foil}->{'name'}=$foil;
1169: $value =~ s/(\s*$|^\s*)//g;
1170: $Partdata{$part}->{'_Foils'}->{$foil}->{'text'}=$value;
1171: } elsif ($key =~ /^foil\.value\.(.*)$/) {
1172: my $foil = $1;
1173: $Partdata{$part}->{'_Foils'}->{$foil}->{'value'}=$value;
1.28 matthew 1174: } elsif ($key eq 'answercomputed') {
1175: $Partdata{$part}->{'answercomputed'} = $value;
1.4 matthew 1176: }
1177: }
1178: }
1179: }
1.28 matthew 1180: # Further debugging code
1181: if (0) {
1182: &Apache::lonnet::logthis('lonstathelpers::get_problem_data');
1183: &log_hash_ref(\%Partdata);
1184: }
1.4 matthew 1185: return %Partdata;
1.5 matthew 1186: }
1187:
1.28 matthew 1188: sub log_array_ref {
1189: my ($arrayref,$prefix) = @_;
1190: return if (ref($arrayref) ne 'ARRAY');
1191: if (! defined($prefix)) { $prefix = ''; };
1192: foreach my $v (@$arrayref) {
1193: if (ref($v) eq 'ARRAY') {
1194: &log_array_ref($v,$prefix.' ');
1195: } elsif (ref($v) eq 'HASH') {
1196: &log_hash_ref($v,$prefix.' ');
1197: } else {
1198: &Apache::lonnet::logthis($prefix.'"'.$v.'"');
1199: }
1200: }
1201: }
1202:
1203: sub log_hash_ref {
1204: my ($hashref,$prefix) = @_;
1205: return if (ref($hashref) ne 'HASH');
1206: if (! defined($prefix)) { $prefix = ''; };
1207: while (my ($k,$v) = each(%$hashref)) {
1208: if (ref($v) eq 'ARRAY') {
1209: &Apache::lonnet::logthis($prefix.'"'.$k.'" = array');
1210: &log_array_ref($v,$prefix.' ');
1211: } elsif (ref($v) eq 'HASH') {
1212: &Apache::lonnet::logthis($prefix.'"'.$k.'" = hash');
1213: &log_hash_ref($v,$prefix.' ');
1214: } else {
1215: &Apache::lonnet::logthis($prefix.'"'.$k.'" => "'.$v.'"');
1216: }
1217: }
1218: }
1.5 matthew 1219: ####################################################
1220: ####################################################
1221:
1222: =pod
1223:
1224: =item &limit_by_time()
1225:
1226: =cut
1227:
1228: ####################################################
1229: ####################################################
1230: sub limit_by_time_form {
1231: my $Starttime_form = '';
1232: my $starttime = &Apache::lonhtmlcommon::get_date_from_form
1233: ('limitby_startdate');
1234: my $endtime = &Apache::lonhtmlcommon::get_date_from_form
1235: ('limitby_enddate');
1236: if (! defined($endtime)) {
1237: $endtime = time;
1238: }
1239: if (! defined($starttime)) {
1240: $starttime = $endtime - 60*60*24*7;
1241: }
1242: my $state;
1243: if (&limit_by_time()) {
1244: $state = '';
1245: } else {
1246: $state = 'disabled';
1247: }
1248: my $startdateform = &Apache::lonhtmlcommon::date_setter
1249: ('Statistics','limitby_startdate',$starttime,undef,undef,$state);
1250: my $enddateform = &Apache::lonhtmlcommon::date_setter
1251: ('Statistics','limitby_enddate',$endtime,undef,undef,$state);
1252: my $Str;
1253: $Str .= '<script language="Javascript" >';
1254: $Str .= 'function toggle_limitby_activity(state) {';
1255: $Str .= ' if (state) {';
1256: $Str .= ' limitby_startdate_enable();';
1257: $Str .= ' limitby_enddate_enable();';
1258: $Str .= ' } else {';
1259: $Str .= ' limitby_startdate_disable();';
1260: $Str .= ' limitby_enddate_disable();';
1261: $Str .= ' }';
1262: $Str .= '}';
1263: $Str .= '</script>';
1264: $Str .= '<fieldset>';
1265: my $timecheckbox = '<input type="checkbox" name="limit_by_time" ';
1266: if (&limit_by_time()) {
1267: $timecheckbox .= ' checked ';
1268: }
1269: $timecheckbox .= 'OnChange="javascript:toggle_limitby_activity(this.checked);" ';
1270: $timecheckbox .= ' />';
1.49 albertel 1271: $Str .= '<legend><label>'.&mt('[_1] Limit by time',$timecheckbox).'</label></legend>';
1.5 matthew 1272: $Str .= &mt('Start Time: [_1]',$startdateform).'<br />';
1273: $Str .= &mt(' End Time: [_1]',$enddateform).'<br />';
1274: $Str .= '</fieldset>';
1275: return $Str;
1276: }
1277:
1278: sub limit_by_time {
1.46 albertel 1279: if (exists($env{'form.limit_by_time'}) &&
1280: $env{'form.limit_by_time'} ne '' ) {
1.5 matthew 1281: return 1;
1282: } else {
1283: return 0;
1284: }
1285: }
1286:
1287: sub get_time_limits {
1288: my $starttime = &Apache::lonhtmlcommon::get_date_from_form
1289: ('limitby_startdate');
1290: my $endtime = &Apache::lonhtmlcommon::get_date_from_form
1291: ('limitby_enddate');
1292: return ($starttime,$endtime);
1.11 matthew 1293: }
1294:
1.2 matthew 1295: ####################################################
1296: ####################################################
1297:
1298: =pod
1299:
1.12 matthew 1300: =item &manage_caches
1301:
1302: Inputs: $r, apache request object
1303:
1304: Returns: An array of scalars containing html for buttons.
1305:
1306: =cut
1307:
1308: ####################################################
1309: ####################################################
1310: sub manage_caches {
1.23 matthew 1311: my ($r,$formname,$inputname,$update_message) = @_;
1.12 matthew 1312: &Apache::loncoursedata::clear_internal_caches();
1.16 matthew 1313: my $sectionkey =
1314: join(',',
1315: map {
1.53 ! www 1316: &escape($_);
1.44 matthew 1317: } sort(&Apache::lonstatistics::get_selected_sections())
1.16 matthew 1318: );
1319: my $statuskey = $Apache::lonstatistics::enrollment_status;
1.46 albertel 1320: if (exists($env{'form.ClearCache'}) ||
1321: exists($env{'form.updatecaches'}) ||
1322: (exists($env{'form.firstrun'}) && $env{'form.firstrun'} ne 'no') ||
1323: (exists($env{'form.prevsection'}) &&
1324: $env{'form.prevsection'} ne $sectionkey) ||
1325: (exists($env{'form.prevenrollstatus'}) &&
1326: $env{'form.prevenrollstatus'} ne $statuskey)
1.16 matthew 1327: ) {
1.23 matthew 1328: if (defined($update_message)) {
1329: $r->print($update_message);
1330: }
1.40 matthew 1331: if (0) {
1332: &Apache::lonnet::logthis('Updating mysql student data caches');
1333: }
1.36 matthew 1334: &gather_full_student_data($r,$formname,$inputname);
1.12 matthew 1335: }
1336: #
1.16 matthew 1337: my @Buttons =
1338: ('<input type="submit" name="ClearCache" '.
1339: 'value="'.&mt('Clear Caches').'" />',
1340: '<input type="submit" name="updatecaches" '.
1.17 matthew 1341: 'value="'.&mt('Update Caches').'" />'.
1342: &Apache::loncommon::help_open_topic('Statistics_Cache'),
1.16 matthew 1343: '<input type="hidden" name="prevsection" value="'.$sectionkey.'" />',
1344: '<input type="hidden" name="prevenrollstatus" value="'.$statuskey.'" />'
1345: );
1346: #
1.46 albertel 1347: if (! exists($env{'form.firstrun'})) {
1.12 matthew 1348: $r->print('<input type="hidden" name="firstrun" value="yes" />');
1349: } else {
1350: $r->print('<input type="hidden" name="firstrun" value="no" />');
1351: }
1352: #
1353: return @Buttons;
1354: }
1355:
1.36 matthew 1356: sub gather_full_student_data {
1357: my ($r,$formname,$inputname) = @_;
1358: my $status_type;
1359: if (defined($formname)) {
1360: $status_type = 'inline';
1361: } else {
1362: $status_type = 'popup';
1363: }
1364: my $c = $r->connection();
1365: #
1366: &Apache::loncoursedata::clear_internal_caches();
1367: #
1368: my @Students = @Apache::lonstatistics::Students;
1369: #
1370: # Open the progress window
1371: my %prog_state=&Apache::lonhtmlcommon::Create_PrgWin
1372: ($r,&mt('Student Data Compilation Status'),
1373: &mt('Student Data Compilation Progress'), scalar(@Students),
1374: $status_type,undef,$formname,$inputname);
1375: #
1376: while (my $student = shift @Students) {
1377: return if ($c->aborted());
1378: my $status = &Apache::loncoursedata::ensure_current_full_data
1379: ($student->{'username'},$student->{'domain'},
1.46 albertel 1380: $env{'request.course.id'});
1.36 matthew 1381: &Apache::lonhtmlcommon::Increment_PrgWin($r,\%prog_state,
1382: &mt('last student'));
1383: }
1384: &Apache::lonhtmlcommon::Close_PrgWin($r,\%prog_state);
1385: $r->rflush();
1386: return;
1387: }
1.12 matthew 1388:
1.38 matthew 1389: ####################################################
1390: ####################################################
1391:
1392: =pod
1393:
1394: =item &submission_report_form
1395:
1396: Input: The originating reportSelected value for the current stats page.
1397:
1398: Output: Scalar containing HTML with needed form elements and a link to
1399: the student submission reports page.
1400:
1401: =cut
1402:
1403: ####################################################
1404: ####################################################
1405: sub submission_report_form {
1406: my ($original_report) = @_;
1407: # Note: In the link below we change the reportSelected value. If
1408: # the user hits the 'back' button on the browser after getting their
1409: # student submissions report, this value may still be around. So we
1410: # output a script block to set it properly. If the $original_report
1411: # value is unset, you are just asking for trouble.
1412: if (! defined($original_report)) {
1413: &Apache::lonnet::logthis
1414: ('someone called lonstathelpers::submission_report_form without '.
1415: ' enough input.');
1416: }
1417: my $html = $/.
1418: '<script type="Text/JavaScript">'.
1419: "document.Statistics.reportSelected.value='$original_report';".
1420: '</script>'.
1421: '<input type="hidden" name="correctans" value="true" />'.
1422: '<input type="hidden" name="prob_status" value="true" />'.
1423: '<input type="hidden" name="all_sub" value="true" />';
1424: my $output_selector = $/.'<select name="output">'.$/;
1425: foreach ('HTML','Excel','CSV') {
1426: $output_selector .= ' <option value="'.lc($_).'"';
1.46 albertel 1427: if ($env{'form.output'} eq lc($_)) {
1.38 matthew 1428: $output_selector .= ' selected ';
1429: }
1430: $output_selector .='>'.&mt($_).'</option>'.$/;
1431: }
1432: $output_selector .= '</select>'.$/;
1433: my $link = '<a href="javascript:'.
1434: q{document.Statistics.reportSelected.value='student_submission_reports';}.
1435: 'document.Statistics.submit();">';
1436: $html.= &mt('View data as [_1] [_2]go[_3]',$output_selector,
1437: $link,'</a>').$/;
1438: return $html
1439: }
1.12 matthew 1440:
1441: ####################################################
1442: ####################################################
1443:
1444: =pod
1445:
1.2 matthew 1446: =back
1447:
1448: =cut
1449:
1450: ####################################################
1451: ####################################################
1.1 matthew 1452:
1453: 1;
1454:
1455: __END__
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>