[BACK]Return to loncnew CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom

Diff for /loncom/loncnew between versions 1.16 and 1.22

version 1.16, 2003/07/29 02:33:05 version 1.22, 2003/09/02 10:34:47
Line 7 Line 7
 # Copyright Michigan State University Board of Trustees  # Copyright Michigan State University Board of Trustees
 #  #
 # This file is part of the LearningOnline Network with CAPA (LON-CAPA).  # This file is part of the LearningOnline Network with CAPA (LON-CAPA).
 #  ## LON-CAPA is free software; you can redistribute it and/or modify
 # LON-CAPA is free software; you can redistribute it and/or modify  
 # it under the terms of the GNU General Public License as published by  # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2 of the License, or  # the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.  # (at your option) any later version.
Line 46 Line 45
   
 # Change log:  # Change log:
 #    $Log$  #    $Log$
   #    Revision 1.22  2003/09/02 10:34:47  foxr
   #    - Fix errors in host dead detection logic (too many cases where the
   #      retries left were not getting incremented or just not checked).
   #    - Added some additional status to the ps axuww display:
   #      o Remaining retries on a host.
   #      o >>> DEAD <<< indicator if I've given up on a host.
   #    - Tested the SIGHUP will reset the retries remaining count (thanks to
   #      the above status stuff, and get allow the loncnew to re-try again
   #      on the host (thanks to the log).
   #
   #    Revision 1.21  2003/08/26 09:19:51  foxr
   #    How embarrassing... put in the SocketTimeout function in loncnew and forgot
   #    to actually hook it into the LondTransaction.  Added this to MakeLondConnection
   #    where it belongs... hopefully transactions (not just connection attempts) will
   #    timeout more speedily than the socket errors will catch it.
   #
   #    Revision 1.20  2003/08/25 18:48:11  albertel
   #    - fixing a forgotten ;
   #
   #    Revision 1.19  2003/08/19 09:31:46  foxr
   #    Get socket directory from configuration rather than the old hard coded test
   #    way that I forgot to un-hard code.
   #
   #    Revision 1.18  2003/08/06 09:52:29  foxr
   #    Also needed to remember to fail in-flight transactions if their sends fail.
   #
   #    Revision 1.17  2003/08/03 00:44:31  foxr
   #    1. Correct handling of connection failure: Assume it means the host is
   #       unreachable and fail all of the queued transactions.  Note that the
   #       inflight transactions should fail on their own time due either to timeout
   #       or send/receive failures.
   #    2. Correct handling of logs for forced death signals.  Pull the signal
   #       from the event watcher.
   #
 #    Revision 1.16  2003/07/29 02:33:05  foxr  #    Revision 1.16  2003/07/29 02:33:05  foxr
 #    Add SIGINT processing to child processes to toggle annoying trace mode  #    Add SIGINT processing to child processes to toggle annoying trace mode
 #    on/off.. will try to use this to isolate the compute boud process issue.  #    on/off.. will try to use this to isolate the compute boud process issue.
Line 67 Line 100
 #    Revision 1.10  2003/06/24 02:46:04  foxr  #    Revision 1.10  2003/06/24 02:46:04  foxr
 #    Put a limit on  the number of times we'll retry a connection.  #    Put a limit on  the number of times we'll retry a connection.
 #    Start getting the signal stuff put in as well...note that need to get signals  #    Start getting the signal stuff put in as well...note that need to get signals
 #    going or else 6the client will permanently give up on dead servers.  #    going or else the client will permanently give up on dead servers.
 #  #
 #    Revision 1.9  2003/06/13 02:38:43  foxr  #    Revision 1.9  2003/06/13 02:38:43  foxr
 #    Add logging in 'expected format'  #    Add logging in 'expected format'
Line 136  my $IdleTimeout= 3600;  # Wait an hour b Line 169  my $IdleTimeout= 3600;  # Wait an hour b
 #  The variables below are only used by the child processes.  #  The variables below are only used by the child processes.
 #  #
 my $RemoteHost; # Name of host child is talking to.  my $RemoteHost; # Name of host child is talking to.
 my $UnixSocketDir= "/home/httpd/sockets";   my $UnixSocketDir= $perlvar{'lonSockDir'};
 my $IdleConnections = Stack->new(); # Set of idle connections  my $IdleConnections = Stack->new(); # Set of idle connections
 my %ActiveConnections; # Connections to the remote lond.  my %ActiveConnections; # Connections to the remote lond.
 my %ActiveTransactions; # LondTransactions in flight.  my %ActiveTransactions; # LondTransactions in flight.
Line 306  sub ShowStatus { Line 339  sub ShowStatus {
 sub SocketTimeout {  sub SocketTimeout {
     my $Socket = shift;      my $Socket = shift;
           
     KillSocket($Socket);      KillSocket($Socket); # A transaction timeout also counts as
                                   # a connection failure:
       $ConnectionRetriesLeft--;
 }  }
   
 =pod  =pod
Line 320  Invoked  each timer tick. Line 355  Invoked  each timer tick.
   
 sub Tick {  sub Tick {
     my $client;      my $client;
     ShowStatus(GetServerHost()." Connection count: ".$ConnectionCount);      if($ConnectionRetriesLeft > 0) {
    ShowStatus(GetServerHost()." Connection count: ".$ConnectionCount
      ." Retries remaining: ".$ConnectionRetriesLeft);
       } else {
    ShowStatus(GetServerHost()." >> DEAD <<");
       }
     # Is it time to prune connection count:      # Is it time to prune connection count:
   
   
Line 352  sub Tick { Line 391  sub Tick {
     my $Connections = ($Requests <= $MaxConnectionCount) ?      my $Connections = ($Requests <= $MaxConnectionCount) ?
  $Requests : $MaxConnectionCount;   $Requests : $MaxConnectionCount;
     Debug(1,"Work but no connections, start ".$Connections." of them");      Debug(1,"Work but no connections, start ".$Connections." of them");
       my $successCount = 0;
     for ($i =0; $i < $Connections; $i++) {      for ($i =0; $i < $Connections; $i++) {
  MakeLondConnection();   $successCount += MakeLondConnection();
       }
       if($successCount == 0) { # All connections failed:
    Debug(1,"Work in queue failed to make any connectiouns\n");
    EmptyQueue(); # Fail pending transactions with con_lost.
     }      }
  } else {   } else {
       ShowStatus(GetServerHost()." >>> DEAD!!! <<<");
     Debug(1,"Work in queue, but gave up on connections..flushing\n");      Debug(1,"Work in queue, but gave up on connections..flushing\n");
     EmptyQueue(); # Connections can't be established.      EmptyQueue(); # Connections can't be established.
  }   }
Line 602  Parameters: Line 647  Parameters:
   
 sub FailTransaction {  sub FailTransaction {
     my $transaction = shift;      my $transaction = shift;
       Log("WARNING", "Failing transaction ".$transaction->getRequest());
     Debug(1, "Failing transaction: ".$transaction->getRequest());      Debug(1, "Failing transaction: ".$transaction->getRequest());
     if (!$transaction->isDeferred()) { # If the transaction is deferred we'll get to it.      if (!$transaction->isDeferred()) { # If the transaction is deferred we'll get to it.
  my $client  = $transaction->getClient();   my $client  = $transaction->getClient();
  Debug(1," Replying con_lost to ".$transaction->getRequest());   Debug(1," Replying con_lost to ".$transaction->getRequest());
  StartClientReply($transaction, "con_lost\n");   StartClientReply($transaction, "con_lost\n");
     }      }
       if($ConnectionRetriesLeft <= 0) {
    Log("CRITICAL", "Host marked dead: ".GetServerHost());
       }
   
 }  }
   
Line 619  sub FailTransaction { Line 668  sub FailTransaction {
   
 =cut  =cut
 sub EmptyQueue {  sub EmptyQueue {
       $ConnectionRetriesLeft--; # Counts as connection failure too.
     while($WorkQueue->Count()) {      while($WorkQueue->Count()) {
  my $request = $WorkQueue->dequeue(); # This is a transaction   my $request = $WorkQueue->dequeue(); # This is a transaction
  FailTransaction($request);   FailTransaction($request);
Line 664  nonzero if we are allowed to create a ne Line 714  nonzero if we are allowed to create a ne
 sub KillSocket {  sub KillSocket {
     my $Socket = shift;      my $Socket = shift;
   
       Log("WARNING", "Shutting down a socket");
     $Socket->Shutdown();      $Socket->Shutdown();
   
     #  If the socket came from the active connection set,      #  If the socket came from the active connection set,
Line 684  sub KillSocket { Line 735  sub KillSocket {
     #  work queue, the work all gets failed with con_lost.      #  work queue, the work all gets failed with con_lost.
     #      #
     if($ConnectionCount == 0) {      if($ConnectionCount == 0) {
  EmptyQueue;   EmptyQueue();
     }      }
 }  }
   
Line 760  sub LondReadable { Line 811  sub LondReadable {
   
     SocketDump(6, $Socket);      SocketDump(6, $Socket);
     my $status = $Socket->Readable();      my $status = $Socket->Readable();
   
     &Debug(2, "Socket->Readable returned: $status");      &Debug(2, "Socket->Readable returned: $status");
   
     if($status != 0) {      if($status != 0) {
  # bad return from socket read. Currently this means that   # bad return from socket read. Currently this means that
  # The socket has become disconnected. We fail the transaction.   # The socket has become disconnected. We fail the transaction.
   
    Log("WARNING",
       "Lond connection lost.");
  if(exists($ActiveTransactions{$Socket})) {   if(exists($ActiveTransactions{$Socket})) {
     Debug(3,"Lond connection lost failing transaction");  
     FailTransaction($ActiveTransactions{$Socket});      FailTransaction($ActiveTransactions{$Socket});
  }   }
  $Watcher->cancel();   $Watcher->cancel();
  KillSocket($Socket);   KillSocket($Socket);
    $ConnectionRetriesLeft--;       # Counts as connection failure
  return;   return;
     }      }
     SocketDump(6,$Socket);      SocketDump(6,$Socket);
Line 805  sub LondReadable { Line 859  sub LondReadable {
     } elsif ($State eq "Idle") {      } elsif ($State eq "Idle") {
  # If necessary, complete a transaction and then go into the   # If necessary, complete a transaction and then go into the
  # idle queue.   # idle queue.
    #  Note that a trasition to idle indicates a live lond
    # on the other end so reset the connection retries.
    #
    $ConnectionRetriesLeft = $ConnectionRetries; # success resets the count
  $Watcher->cancel();   $Watcher->cancel();
  if(exists($ActiveTransactions{$Socket})) {   if(exists($ActiveTransactions{$Socket})) {
     Debug(8,"Completing transaction!!");      Debug(8,"Completing transaction!!");
Line 917  sub LondWritable { Line 975  sub LondWritable {
     # We'll treat this as if the socket got disconnected:      # We'll treat this as if the socket got disconnected:
     Log("WARNING", "Connection to ".$RemoteHost.      Log("WARNING", "Connection to ".$RemoteHost.
  " has been disconnected");   " has been disconnected");
       FailTransaction($ActiveTransactions{$Socket});
     $Watcher->cancel();      $Watcher->cancel();
     KillSocket($Socket);      KillSocket($Socket);
     return;      return;
Line 1059  sub MakeLondConnection { Line 1118  sub MakeLondConnection {
  $ConnectionRetriesLeft--;   $ConnectionRetriesLeft--;
  return 0; # Failure.   return 0; # Failure.
     }  else {      }  else {
  $ConnectionRetriesLeft = $ConnectionRetries; # success resets the count  
  # The connection needs to have writability    # The connection needs to have writability 
  # monitored in order to send the init sequence   # monitored in order to send the init sequence
  # that starts the whole authentication/key   # that starts the whole authentication/key
Line 1072  sub MakeLondConnection { Line 1131  sub MakeLondConnection {
     &Debug(9,"MakeLondConnection got socket: ".$Socket);      &Debug(9,"MakeLondConnection got socket: ".$Socket);
  }   }
   
    $Connection->SetTimeoutCallback(\&SocketTimeout);
   
  $event = Event->io(fd       => $Socket,   $event = Event->io(fd       => $Socket,
    poll     => 'w',     poll     => 'w',
    cb       => \&LondWritable,     cb       => \&LondWritable,
Line 1171  sub QueueTransaction { Line 1231  sub QueueTransaction {
  Debug(8,"Must queue...");   Debug(8,"Must queue...");
  $WorkQueue->enqueue($requestData);   $WorkQueue->enqueue($requestData);
  if($ConnectionCount < $MaxConnectionCount) {   if($ConnectionCount < $MaxConnectionCount) {
     Debug(4,"Starting additional lond connection");      if($ConnectionRetriesLeft > 0) {
     MakeLondConnection();   Debug(4,"Starting additional lond connection");
    if(MakeLondConnection() == 0) {
       EmptyQueue(); # Fail transactions, can't make connection.
    }
       } else {
    ShowStatus(GetServerHost()." >>> DEAD !!!! <<<");
    EmptyQueue(); # It's worse than that ... he's dead Jim.
       }
  }   }
     } else { # Can start the request:      } else { # Can start the request:
  Debug(8,"Can start...");   Debug(8,"Can start...");
Line 1337  sub SetupLoncListener { Line 1404  sub SetupLoncListener {
 Child USR1 signal handler to report the most recent status  Child USR1 signal handler to report the most recent status
 into the status file.  into the status file.
   
   We also use this to reset the retries count in order to allow the
   client to retry connections with a previously dead server.
 =cut  =cut
 sub ChildStatus {  sub ChildStatus {
     my $event = shift;      my $event = shift;
Line 1347  sub ChildStatus { Line 1416  sub ChildStatus {
     my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt");      my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt");
     print $fh $$."\t".$RemoteHost."\t".$Status."\t".      print $fh $$."\t".$RemoteHost."\t".$Status."\t".
  $RecentLogEntry."\n";   $RecentLogEntry."\n";
       $ConnectionRetriesLeft = $ConnectionRetries;
 }  }
   
 =pod  =pod
Line 1363  sub SignalledToDeath { Line 1433  sub SignalledToDeath {
     my $watcher= $event->w;      my $watcher= $event->w;
   
     Debug(2,"Signalled to death! via ".$watcher->data);      Debug(2,"Signalled to death! via ".$watcher->data);
     my ($signal) = @_;      my ($signal) = $watcher->data;
     chomp($signal);      chomp($signal);
     Log("CRITICAL", "Abnormal exit.  Child $$ for $RemoteHost "      Log("CRITICAL", "Abnormal exit.  Child $$ for $RemoteHost "
  ."died through "."\"$signal\"");   ."died through "."\"$signal\"");
     LogPerm("F:lonc: $$ on $RemoteHost signalled to death: "      LogPerm("F:lonc: $$ on $RemoteHost signalled to death: "
     ."\"$signal\"");      ."\"$signal\"");
     die("Signal abnormal end");  
     exit 0;      exit 0;
   
 }  }
Line 1445  sub CreateChild { Line 1514  sub CreateChild {
     Log("CRITICAL", "Forking server for ".$host);      Log("CRITICAL", "Forking server for ".$host);
     $pid          = fork;      $pid          = fork;
     if($pid) { # Parent      if($pid) { # Parent
    $RemoteHost = "Parent";
  $ChildHash{$pid} = $RemoteHost;   $ChildHash{$pid} = $RemoteHost;
  sigprocmask(SIG_UNBLOCK, $sigset);   sigprocmask(SIG_UNBLOCK, $sigset);
   
Line 1492  open (PIDSAVE, ">$execdir/logs/lonc.pid" Line 1562  open (PIDSAVE, ">$execdir/logs/lonc.pid"
 print PIDSAVE "$$\n";  print PIDSAVE "$$\n";
 close(PIDSAVE);  close(PIDSAVE);
   
   
   
 if (POSIX::setsid() < 0) {  if (POSIX::setsid() < 0) {
     print "Could not create new session\n";      print "Could not create new session\n";
     exit -1;      exit -1;
Line 1586  sub Restart { Line 1658  sub Restart {
 =head1 KillThemAll  =head1 KillThemAll
   
 Signal handler that kills all children by sending them a   Signal handler that kills all children by sending them a 
 SIGINT.  Responds to sigint and sigterm.  SIGHUP.  Responds to sigint and sigterm.
   
 =cut  =cut
   
Line 1598  sub KillThemAll { Line 1670  sub KillThemAll {
  Debug(2, "Killing lonc for $serving pid = $pid");   Debug(2, "Killing lonc for $serving pid = $pid");
  ShowStatus("Killing lonc for $serving pid = $pid");   ShowStatus("Killing lonc for $serving pid = $pid");
  Log("CRITICAL", "Killing lonc for $serving pid = $pid");   Log("CRITICAL", "Killing lonc for $serving pid = $pid");
  kill('INT', $pid);   kill 'QUIT' => $pid;
  delete($ChildeHash{$pid});   delete($ChildHash{$pid});
     }      }
     my $execdir = $perlvar{'lonDaemons'};      my $execdir = $perlvar{'lonDaemons'};
     unlink("$execdir/logs/lonc.pid");      unlink("$execdir/logs/lonc.pid");
     ShowStatus("Killing the master process");  
     Log("CRITICAL", "Killing the master process.");  
 }  }
   
 =pod  =pod
Line 1617  Terminate the system. Line 1688  Terminate the system.
   
 sub Terminate {  sub Terminate {
     KillThemAll;      KillThemAll;
     exit;      Log("CRITICAL","Master process exiting");
       exit 0;
   
 }  }
 =pod  =pod
Removed from v.1.16  
changed lines
  Added in v.1.22

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>