[BACK]Return to loncnew CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom

Diff for /loncom/loncnew between versions 1.22 and 1.39

version 1.22, 2003/09/02 10:34:47 version 1.39, 2004/01/13 09:57:18
Line 35 Line 35
 #    - Add ability to create/negotiate lond connections (done).  #    - Add ability to create/negotiate lond connections (done).
 #    - Add general logic for dispatching requests and timeouts. (done).  #    - Add general logic for dispatching requests and timeouts. (done).
 #    - Add support for the lonc/lond requests.          (done).  #    - Add support for the lonc/lond requests.          (done).
 #    - Add logging/status monitoring.  #    - Add logging/status monitoring.                    (done)
 #    - Add Signal handling - HUP restarts. USR1 status report.  #    - Add Signal handling - HUP restarts. USR1 status report. (done)
 #    - Add Configuration file I/O                       (done).  #    - Add Configuration file I/O                       (done).
 #    - Add management/status request interface.  #    - Add management/status request interface.         (done)
 #    - Add deferred request capability.                  (done)  #    - Add deferred request capability.                  (done)
 #    - Detect transmission timeouts.  #    - Detect transmission timeouts.                     (done)
 #  
   
 # Change log:  
 #    $Log$  
 #    Revision 1.22  2003/09/02 10:34:47  foxr  
 #    - Fix errors in host dead detection logic (too many cases where the  
 #      retries left were not getting incremented or just not checked).  
 #    - Added some additional status to the ps axuww display:  
 #      o Remaining retries on a host.  
 #      o >>> DEAD <<< indicator if I've given up on a host.  
 #    - Tested the SIGHUP will reset the retries remaining count (thanks to  
 #      the above status stuff, and get allow the loncnew to re-try again  
 #      on the host (thanks to the log).  
 #  
 #    Revision 1.21  2003/08/26 09:19:51  foxr  
 #    How embarrassing... put in the SocketTimeout function in loncnew and forgot  
 #    to actually hook it into the LondTransaction.  Added this to MakeLondConnection  
 #    where it belongs... hopefully transactions (not just connection attempts) will  
 #    timeout more speedily than the socket errors will catch it.  
 #  
 #    Revision 1.20  2003/08/25 18:48:11  albertel  
 #    - fixing a forgotten ;  
 #  
 #    Revision 1.19  2003/08/19 09:31:46  foxr  
 #    Get socket directory from configuration rather than the old hard coded test  
 #    way that I forgot to un-hard code.  
 #  
 #    Revision 1.18  2003/08/06 09:52:29  foxr  
 #    Also needed to remember to fail in-flight transactions if their sends fail.  
 #  
 #    Revision 1.17  2003/08/03 00:44:31  foxr  
 #    1. Correct handling of connection failure: Assume it means the host is  
 #       unreachable and fail all of the queued transactions.  Note that the  
 #       inflight transactions should fail on their own time due either to timeout  
 #       or send/receive failures.  
 #    2. Correct handling of logs for forced death signals.  Pull the signal  
 #       from the event watcher.  
 #  
 #    Revision 1.16  2003/07/29 02:33:05  foxr  
 #    Add SIGINT processing to child processes to toggle annoying trace mode  
 #    on/off.. will try to use this to isolate the compute boud process issue.  
 #  
 #    Revision 1.15  2003/07/15 02:07:05  foxr  
 #    Added code for lonc/lond transaction timeouts.  Who knows if it works right.  
 #    The intent is for a timeout to fail any transaction in progress and kill  
 #    off the sockt that timed out.  
 #  
 #    Revision 1.14  2003/07/03 02:10:18  foxr  
 #    Get all of the signals to work correctly.  
 #  
 #    Revision 1.13  2003/07/02 01:31:55  foxr  
 #    Added kill -HUP logic (restart).  
 #  
 #    Revision 1.11  2003/06/25 01:54:44  foxr  
 #    Fix more problems with transaction failure.  
 #  
 #    Revision 1.10  2003/06/24 02:46:04  foxr  
 #    Put a limit on  the number of times we'll retry a connection.  
 #    Start getting the signal stuff put in as well...note that need to get signals  
 #    going or else the client will permanently give up on dead servers.  
 #  
 #    Revision 1.9  2003/06/13 02:38:43  foxr  
 #    Add logging in 'expected format'  
 #  
 #    Revision 1.8  2003/06/11 02:04:35  foxr  
 #    Support delayed transactions... this is done uniformly by encapsulating  
 #    transactions in an object ... a LondTransaction that is implemented by  
 #    LondTransaction.pm  
 #  
 #    Revision 1.7  2003/06/03 01:59:39  foxr  
 #    complete coding to support deferred transactions.  
 #  
 #  #
   
   use strict;
 use lib "/home/httpd/lib/perl/";  use lib "/home/httpd/lib/perl/";
 use lib "/home/foxr/newloncapa/types";  
 use Event qw(:DEFAULT );  use Event qw(:DEFAULT );
 use POSIX qw(:signal_h);  use POSIX qw(:signal_h);
 use POSIX;  use POSIX;
Line 138  use LONCAPA::HashIterator; Line 66  use LONCAPA::HashIterator;
 #  #
 #   Disable all signals we might receive from outside for now.  #   Disable all signals we might receive from outside for now.
 #  #
 #$SIG{QUIT}  = IGNORE;  
 #$SIG{HUP}   = IGNORE;  
 #$SIG{USR1}  = IGNORE;  
 #$SIG{INT}   = IGNORE;  
 #$SIG{CHLD}  = IGNORE;  
 #$SIG{__DIE__}  = IGNORE;  
   
   
 # Read the httpd configuration file to get perl variables  # Read the httpd configuration file to get perl variables
Line 156  my %perlvar    = %{$perlvarref}; Line 78  my %perlvar    = %{$perlvarref};
 #  parent and shared variables.  #  parent and shared variables.
   
 my %ChildHash; # by pid -> host.  my %ChildHash; # by pid -> host.
   my %HostToPid; # By host -> pid.
   my %HostHash; # by loncapaname -> IP.
   
   
 my $MaxConnectionCount = 10; # Will get from config later.  my $MaxConnectionCount = 10; # Will get from config later.
 my $ClientConnection = 0; # Uniquifier for client events.  my $ClientConnection = 0; # Uniquifier for client events.
   
 my $DebugLevel = 0;  my $DebugLevel = 0;
 my $NextDebugLevel= 10; # So Sigint can toggle this.  my $NextDebugLevel= 2; # So Sigint can toggle this.
 my $IdleTimeout= 3600; # Wait an hour before pruning connections.  my $IdleTimeout= 3600; # Wait an hour before pruning connections.
   
   my $LogTransactions = 0; # When True, all transactions/replies get logged.
   
 #  #
 #  The variables below are only used by the child processes.  #  The variables below are only used by the child processes.
 #  #
Line 179  my $ConnectionCount = 0; Line 105  my $ConnectionCount = 0;
 my $IdleSeconds     = 0; # Number of seconds idle.  my $IdleSeconds     = 0; # Number of seconds idle.
 my $Status          = ""; # Current status string.  my $Status          = ""; # Current status string.
 my $RecentLogEntry  = "";  my $RecentLogEntry  = "";
 my $ConnectionRetries=5; # Number of connection retries allowed.  my $ConnectionRetries=2; # Number of connection retries allowed.
 my $ConnectionRetriesLeft=5; # Number of connection retries remaining.  my $ConnectionRetriesLeft=2; # Number of connection retries remaining.
   
 #  #
 #   The hash below gives the HTML format for log messages  #   The hash below gives the HTML format for log messages
Line 278  sub GetPeername { Line 204  sub GetPeername {
     my $peerip;      my $peerip;
     if($AdrFamily == AF_INET) {      if($AdrFamily == AF_INET) {
  ($peerport, $peerip) = sockaddr_in($peer);   ($peerport, $peerip) = sockaddr_in($peer);
  my $peername    = gethostbyaddr($iaddr, $AdrFamily);   my $peername    = gethostbyaddr($peerip, $AdrFamily);
  return $peername;   return $peername;
     } elsif ($AdrFamily == AF_UNIX) {      } elsif ($AdrFamily == AF_UNIX) {
  my $peerfile;   my $peerfile;
Line 286  sub GetPeername { Line 212  sub GetPeername {
  return $peerfile;   return $peerfile;
     }      }
 }  }
 #----------------------------- Timer management ------------------------  
 =pod  =pod
   
 =head2 Debug  =head2 Debug
Line 299  sub Debug { Line 224  sub Debug {
     my $level   = shift;      my $level   = shift;
     my $message = shift;      my $message = shift;
     if ($level <= $DebugLevel) {      if ($level <= $DebugLevel) {
  Log("INFO", "-Debug- $message host = $RemotHost");   Log("INFO", "-Debug- $message host = $RemoteHost");
     }      }
 }  }
   
Line 338  sub ShowStatus { Line 263  sub ShowStatus {
 =cut  =cut
 sub SocketTimeout {  sub SocketTimeout {
     my $Socket = shift;      my $Socket = shift;
           Log("WARNING", "A socket timeout was detected");
       Debug(0, " SocketTimeout called: ");
       $Socket->Dump();
     KillSocket($Socket); # A transaction timeout also counts as      KillSocket($Socket); # A transaction timeout also counts as
                                 # a connection failure:                                  # a connection failure:
     $ConnectionRetriesLeft--;      $ConnectionRetriesLeft--;
 }  }
   #----------------------------- Timer management ------------------------
   
 =pod  =pod
   
Line 368  sub Tick { Line 296  sub Tick {
        ($WorkQueue->Count() == 0)) { # Idle connections and nothing to do?         ($WorkQueue->Count() == 0)) { # Idle connections and nothing to do?
  $IdleSeconds++;   $IdleSeconds++;
  if($IdleSeconds > $IdleTimeout) { # Prune a connection...   if($IdleSeconds > $IdleTimeout) { # Prune a connection...
     $Socket = $IdleConnections->pop();      my $Socket = $IdleConnections->pop();
     KillSocket($Socket);      KillSocket($Socket);
  }   }
     } else {      } else {
Line 377  sub Tick { Line 305  sub Tick {
     #      #
     #  For each inflight transaction, tick down its timeout counter.      #  For each inflight transaction, tick down its timeout counter.
     #      #
     foreach $item (keys %ActiveTransactions) {  
  my $Socket = $ActiveTransactions{$item}->getServer();      foreach my $item (keys %ActiveConnections) {
  $Socket->Tick();   my $State = $ActiveConnections{$item}->data->GetState();
    if ($State ne 'Idle') {
       Debug(5,"Ticking Socket $State $item");
       $ActiveConnections{$item}->data->Tick();
    }
     }      }
     # Do we have work in the queue, but no connections to service them?      # Do we have work in the queue, but no connections to service them?
     # If so, try to make some new connections to get things going again.      # If so, try to make some new connections to get things going again.
Line 390  sub Tick { Line 322  sub Tick {
  if ($ConnectionRetriesLeft > 0) {   if ($ConnectionRetriesLeft > 0) {
     my $Connections = ($Requests <= $MaxConnectionCount) ?      my $Connections = ($Requests <= $MaxConnectionCount) ?
  $Requests : $MaxConnectionCount;   $Requests : $MaxConnectionCount;
     Debug(1,"Work but no connections, start ".$Connections." of them");      Debug(5,"Work but no connections, start ".$Connections." of them");
     my $successCount = 0;      my $successCount = 0;
     for ($i =0; $i < $Connections; $i++) {      for (my $i =0; $i < $Connections; $i++) {
  $successCount += MakeLondConnection();   $successCount += MakeLondConnection();
     }      }
     if($successCount == 0) { # All connections failed:      if($successCount == 0) { # All connections failed:
  Debug(1,"Work in queue failed to make any connectiouns\n");   Debug(5,"Work in queue failed to make any connectiouns\n");
  EmptyQueue(); # Fail pending transactions with con_lost.   EmptyQueue(); # Fail pending transactions with con_lost.
     }      }
  } else {   } else {
     ShowStatus(GetServerHost()." >>> DEAD!!! <<<");      ShowStatus(GetServerHost()." >>> DEAD!!! <<<");
     Debug(1,"Work in queue, but gave up on connections..flushing\n");      Debug(5,"Work in queue, but gave up on connections..flushing\n");
     EmptyQueue(); # Connections can't be established.      EmptyQueue(); # Connections can't be established.
  }   }
                 
Line 426  Trigger disconnections of idle sockets. Line 358  Trigger disconnections of idle sockets.
   
 sub SetupTimer {  sub SetupTimer {
     Debug(6, "SetupTimer");      Debug(6, "SetupTimer");
     Event->timer(interval => 1, debug => 1, cb => \&Tick );      Event->timer(interval => 1, cb => \&Tick );
 }  }
   
 =pod  =pod
Line 448  sub ServerToIdle { Line 380  sub ServerToIdle {
     my $Socket   = shift; # Get the socket.      my $Socket   = shift; # Get the socket.
     delete($ActiveTransactions{$Socket}); # Server has no transaction      delete($ActiveTransactions{$Socket}); # Server has no transaction
   
     &Debug(6, "Server to idle");      &Debug(5, "Server to idle");
   
     #  If there's work to do, start the transaction:      #  If there's work to do, start the transaction:
   
     $reqdata = $WorkQueue->dequeue(); # This is a LondTransaction      my $reqdata = $WorkQueue->dequeue(); # This is a LondTransaction
     unless($reqdata eq undef)  {      if ($reqdata ne undef)  {
  Debug(9, "Queue gave request data: ".$reqdata->getRequest());   Debug(5, "Queue gave request data: ".$reqdata->getRequest());
  &StartRequest($Socket,  $reqdata);   &StartRequest($Socket,  $reqdata);
   
     } else {      } else {
   
     #  There's no work waiting, so push the server to idle list.      #  There's no work waiting, so push the server to idle list.
  &Debug(8, "No new work requests, server connection going idle");   &Debug(5, "No new work requests, server connection going idle");
  $IdleConnections->push($Socket);   $IdleConnections->push($Socket);
     }      }
 }  }
Line 506  sub ClientWritable { Line 438  sub ClientWritable {
  # request.   # request.
   
  &Debug(9,"Send result is ".$result." Defined: ".defined($result));   &Debug(9,"Send result is ".$result." Defined: ".defined($result));
  if(defined($result)) {   if($result ne undef) {
     &Debug(9, "send result was defined");      &Debug(9, "send result was defined");
     if($result == length($Data)) { # Entire string sent.      if($result == length($Data)) { # Entire string sent.
  &Debug(9, "ClientWritable data all written");   &Debug(9, "ClientWritable data all written");
Line 577  The transaction that is being completed. Line 509  The transaction that is being completed.
 =cut  =cut
   
 sub CompleteTransaction {  sub CompleteTransaction {
     &Debug(6,"Complete transaction");      &Debug(5,"Complete transaction");
     my $Socket = shift;      my $Socket = shift;
     my $Transaction = shift;      my $Transaction = shift;
   
     if (!$Transaction->isDeferred()) { # Normal transaction      if (!$Transaction->isDeferred()) { # Normal transaction
  my $data   = $Socket->GetReply(); # Data to send.   my $data   = $Socket->GetReply(); # Data to send.
    if($LogTransactions) {
       Log("SUCCESS", "Reply from lond: '$data'");
    }
  StartClientReply($Transaction, $data);   StartClientReply($Transaction, $data);
     } else { # Delete deferred transaction file.      } else { # Delete deferred transaction file.
  Log("SUCCESS", "A delayed transaction was completed");   Log("SUCCESS", "A delayed transaction was completed");
  LogPerm("S:$Client:".$Transaction->getRequest());   LogPerm("S:$Transaction->getClient() :".$Transaction->getRequest());
  unlink $Transaction->getFile();   unlink $Transaction->getFile();
     }      }
 }  }
Line 616  sub StartClientReply { Line 551  sub StartClientReply {
     &Debug(8," Reply was: ".$data);      &Debug(8," Reply was: ".$data);
     my $Serial         = $ActiveClients{$Client};      my $Serial         = $ActiveClients{$Client};
     my $desc           = sprintf("Connection to lonc client %d",      my $desc           = sprintf("Connection to lonc client %d",
   
  $Serial);   $Serial);
     Event->io(fd       => $Client,      Event->io(fd       => $Client,
       poll     => "w",        poll     => "w",
Line 683  Close all connections open on lond prior Line 617  Close all connections open on lond prior
   
 =cut  =cut
 sub CloseAllLondConnections {  sub CloseAllLondConnections {
     foreach $Socket (keys %ActiveConnections) {      foreach my $Socket (keys %ActiveConnections) {
  KillSocket($Socket);   KillSocket($Socket);
     }      }
 }  }
Line 728  sub KillSocket { Line 662  sub KillSocket {
     }      }
     if(exists($ActiveConnections{$Socket})) {      if(exists($ActiveConnections{$Socket})) {
  delete($ActiveConnections{$Socket});   delete($ActiveConnections{$Socket});
    $ConnectionCount--;
    if ($ConnectionCount < 0) { $ConnectionCount = 0; }
     }      }
     $ConnectionCount--;  
   
     #  If the connection count has gone to zero and there is work in the      #  If the connection count has gone to zero and there is work in the
     #  work queue, the work all gets failed with con_lost.      #  work queue, the work all gets failed with con_lost.
     #      #
Line 804  sub LondReadable { Line 738  sub LondReadable {
     my $Socket     = $Watcher->data;      my $Socket     = $Watcher->data;
     my $client     = undef;      my $client     = undef;
   
     &Debug(6,"LondReadable called state = ".$State);      &Debug(6,"LondReadable called state = ".$Socket->GetState());
   
   
     my $State = $Socket->GetState(); # All action depends on the state.      my $State = $Socket->GetState(); # All action depends on the state.
Line 865  sub LondReadable { Line 799  sub LondReadable {
  $ConnectionRetriesLeft = $ConnectionRetries; # success resets the count   $ConnectionRetriesLeft = $ConnectionRetries; # success resets the count
  $Watcher->cancel();   $Watcher->cancel();
  if(exists($ActiveTransactions{$Socket})) {   if(exists($ActiveTransactions{$Socket})) {
     Debug(8,"Completing transaction!!");      Debug(5,"Completing transaction!!");
     CompleteTransaction($Socket,       CompleteTransaction($Socket, 
  $ActiveTransactions{$Socket});   $ActiveTransactions{$Socket});
  } else {   } else {
Line 1075  sub QueueDelayed { Line 1009  sub QueueDelayed {
     Debug(4, "Delayed path: ".$path);      Debug(4, "Delayed path: ".$path);
     opendir(DIRHANDLE, $path);      opendir(DIRHANDLE, $path);
           
     @alldelayed = grep /\.$RemoteHost$/, readdir DIRHANDLE;      my @alldelayed = grep /\.$RemoteHost$/, readdir DIRHANDLE;
     Debug(4, "Got ".$alldelayed." delayed files");  
     closedir(DIRHANDLE);      closedir(DIRHANDLE);
     my $dfname;      my $dfname;
     my $reqfile;      my $reqfile;
Line 1113  sub MakeLondConnection { Line 1046  sub MakeLondConnection {
     my $Connection = LondConnection->new(&GetServerHost(),      my $Connection = LondConnection->new(&GetServerHost(),
  &GetServerPort());   &GetServerPort());
   
     if($Connection == undef) { # Needs to be more robust later.      if($Connection eq undef) { # Needs to be more robust later.
  Log("CRITICAL","Failed to make a connection with lond.");   Log("CRITICAL","Failed to make a connection with lond.");
  $ConnectionRetriesLeft--;   $ConnectionRetriesLeft--;
  return 0; # Failure.   return 0; # Failure.
Line 1125  sub MakeLondConnection { Line 1058  sub MakeLondConnection {
  # exchange underway.   # exchange underway.
  #   #
  my $Socket = $Connection->GetSocket();   my $Socket = $Connection->GetSocket();
  if($Socket == undef) {   if($Socket eq undef) {
     die "did not get a socket from the connection";      die "did not get a socket from the connection";
  } else {   } else {
     &Debug(9,"MakeLondConnection got socket: ".$Socket);      &Debug(9,"MakeLondConnection got socket: ".$Socket);
Line 1133  sub MakeLondConnection { Line 1066  sub MakeLondConnection {
   
  $Connection->SetTimeoutCallback(\&SocketTimeout);   $Connection->SetTimeoutCallback(\&SocketTimeout);
   
  $event = Event->io(fd       => $Socket,   my $event = Event->io(fd       => $Socket,
    poll     => 'w',     poll     => 'w',
    cb       => \&LondWritable,     cb       => \&LondWritable,
    data     => $Connection,     data     => $Connection,
Line 1189  sub StartRequest { Line 1122  sub StartRequest {
     $ActiveTransactions{$Lond} = $Request;      $ActiveTransactions{$Lond} = $Request;
   
     $Lond->InitiateTransaction($Request->getRequest());      $Lond->InitiateTransaction($Request->getRequest());
     $event = Event->io(fd      => $Socket,      my $event = Event->io(fd      => $Socket,
        poll    => "w",         poll    => "w",
        cb      => \&LondWritable,         cb      => \&LondWritable,
        data    => $Lond,         data    => $Lond,
Line 1228  sub QueueTransaction { Line 1161  sub QueueTransaction {
   
     my $LondSocket    = $IdleConnections->pop();      my $LondSocket    = $IdleConnections->pop();
     if(!defined $LondSocket) { # Need to queue request.      if(!defined $LondSocket) { # Need to queue request.
  Debug(8,"Must queue...");   Debug(5,"Must queue...");
  $WorkQueue->enqueue($requestData);   $WorkQueue->enqueue($requestData);
  if($ConnectionCount < $MaxConnectionCount) {   if($ConnectionCount < $MaxConnectionCount) {
     if($ConnectionRetriesLeft > 0) {      if($ConnectionRetriesLeft > 0) {
  Debug(4,"Starting additional lond connection");   Debug(5,"Starting additional lond connection");
  if(MakeLondConnection() == 0) {   if(MakeLondConnection() == 0) {
     EmptyQueue(); # Fail transactions, can't make connection.      EmptyQueue(); # Fail transactions, can't make connection.
  }   }
Line 1270  sub ClientRequest { Line 1203  sub ClientRequest {
     my $rv = $socket->recv($thisread, POSIX::BUFSIZ, 0);      my $rv = $socket->recv($thisread, POSIX::BUFSIZ, 0);
     Debug(8, "rcv:  data length = ".length($thisread)      Debug(8, "rcv:  data length = ".length($thisread)
   ." read =".$thisread);    ." read =".$thisread);
     unless (defined $rv && length($thisread)) {      unless (defined $rv  && length($thisread)) {
  # Likely eof on socket.   # Likely eof on socket.
  Debug(5,"Client Socket closed on lonc for ".$RemoteHost);   Debug(5,"Client Socket closed on lonc for ".$RemoteHost);
  close($socket);   close($socket);
Line 1289  sub ClientRequest { Line 1222  sub ClientRequest {
     exit;      exit;
  }   }
  Debug(8, "Complete transaction received: ".$data);   Debug(8, "Complete transaction received: ".$data);
    if($LogTransactions) {
       Log("SUCCESS", "Transaction: '$data'"); # Transaction has \n.
    }
  my $Transaction = LondTransaction->new($data);   my $Transaction = LondTransaction->new($data);
  $Transaction->SetClient($socket);   $Transaction->SetClient($socket);
  QueueTransaction($Transaction);   QueueTransaction($Transaction);
Line 1397  sub SetupLoncListener { Line 1333  sub SetupLoncListener {
       fd     => $socket);        fd     => $socket);
 }  }
   
   #
   #   Toggle transaction logging.
   #  Implicit inputs:  
   #     LogTransactions
   #  Implicit Outputs:
   #     LogTransactions
   sub ToggleTransactionLogging {
       print STDERR "Toggle transaction logging...\n";
       if(!$LogTransactions) {
    $LogTransactions = 1;
       } else {
    $LogTransactions = 0;
       }
   
   
       Log("SUCCESS", "Toggled transaction logging: $LogTransactions \n");
   }
   
 =pod   =pod 
   
 =head2 ChildStatus  =head2 ChildStatus
Line 1416  sub ChildStatus { Line 1370  sub ChildStatus {
     my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt");      my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt");
     print $fh $$."\t".$RemoteHost."\t".$Status."\t".      print $fh $$."\t".$RemoteHost."\t".$Status."\t".
  $RecentLogEntry."\n";   $RecentLogEntry."\n";
       #
       #  Write out information about each of the connections:
       #
       print $fh "Active connection statuses: \n";
       my $i = 1;
       print STDERR  "================================= Socket Status Dump:\n";
       foreach my $item (keys %ActiveConnections) {
    my $Socket = $ActiveConnections{$item}->data;
    my $state  = $Socket->GetState();
    print $fh "Connection $i State: $state\n";
    print STDERR "---------------------- Connection $i \n";
    $Socket->Dump();
    $i++;
       }
     $ConnectionRetriesLeft = $ConnectionRetries;      $ConnectionRetriesLeft = $ConnectionRetries;
 }  }
   
Line 1480  sub ChildProcess { Line 1448  sub ChildProcess {
     Event->signal(signal   => "USR1",      Event->signal(signal   => "USR1",
   cb       => \&ChildStatus,    cb       => \&ChildStatus,
   data     => "USR1");    data     => "USR1");
       Event->signal(signal   => "USR2",
     cb       => \&ToggleTransactionLogging);
     Event->signal(signal   => "INT",      Event->signal(signal   => "INT",
   cb       => \&ToggleDebug,    cb       => \&ToggleDebug,
   data     => "INT");    data     => "INT");
Line 1512  sub CreateChild { Line 1482  sub CreateChild {
     my $host = shift;      my $host = shift;
     $RemoteHost = $host;      $RemoteHost = $host;
     Log("CRITICAL", "Forking server for ".$host);      Log("CRITICAL", "Forking server for ".$host);
     $pid          = fork;      my $pid          = fork;
     if($pid) { # Parent      if($pid) { # Parent
  $RemoteHost = "Parent";   $RemoteHost = "Parent";
  $ChildHash{$pid} = $RemoteHost;   $ChildHash{$pid} = $host;
    $HostToPid{$host}= $pid;
  sigprocmask(SIG_UNBLOCK, $sigset);   sigprocmask(SIG_UNBLOCK, $sigset);
   
     } else { # child.      } else { # child.
  ShowStatus("Connected to ".$RemoteHost);   ShowStatus("Connected to ".$RemoteHost);
  $SIG{INT} = DEFAULT;   $SIG{INT} = 'DEFAULT';
  sigprocmask(SIG_UNBLOCK, $sigset);   sigprocmask(SIG_UNBLOCK, $sigset);
  ChildProcess; # Does not return.   ChildProcess; # Does not return.
     }      }
Line 1557  if ($childpid != 0) { Line 1528  if ($childpid != 0) {
 #  #
   
 ShowStatus("Parent writing pid file:");  ShowStatus("Parent writing pid file:");
 $execdir = $perlvar{'lonDaemons'};  my $execdir = $perlvar{'lonDaemons'};
 open (PIDSAVE, ">$execdir/logs/lonc.pid");  open (PIDSAVE, ">$execdir/logs/lonc.pid");
 print PIDSAVE "$$\n";  print PIDSAVE "$$\n";
 close(PIDSAVE);  close(PIDSAVE);
Line 1573  ShowStatus("Forking node servers"); Line 1544  ShowStatus("Forking node servers");
   
 Log("CRITICAL", "--------------- Starting children ---------------");  Log("CRITICAL", "--------------- Starting children ---------------");
   
   LondConnection::ReadConfig;               # Read standard config files.
 my $HostIterator = LondConnection::GetHostIterator;  my $HostIterator = LondConnection::GetHostIterator;
 while (! $HostIterator->end()) {  while (! $HostIterator->end()) {
   
     $hostentryref = $HostIterator->get();      my $hostentryref = $HostIterator->get();
     CreateChild($hostentryref->[0]);      CreateChild($hostentryref->[0]);
       $HostHash{$hostentryref->[0]} = $hostentryref->[4];
     $HostIterator->next();      $HostIterator->next();
 }  }
 $RemoteHost = "Parent Server";  $RemoteHost = "Parent Server";
Line 1594  $SIG{INT}  = \&Terminate; Line 1567  $SIG{INT}  = \&Terminate;
 $SIG{TERM} = \&Terminate;   $SIG{TERM} = \&Terminate; 
 $SIG{HUP}  = \&Restart;  $SIG{HUP}  = \&Restart;
 $SIG{USR1} = \&CheckKids;   $SIG{USR1} = \&CheckKids; 
   $SIG{USR2} = \&UpdateKids; # LonManage update request.
   
 while(1) {  while(1) {
     $deadchild = wait();      my $deadchild = wait();
     if(exists $ChildHash{$deadchild}) { # need to restart.      if(exists $ChildHash{$deadchild}) { # need to restart.
  $deadhost = $ChildHash{$deadchild};   my $deadhost = $ChildHash{$deadchild};
    delete($HostToPid{$deadhost});
  delete($ChildHash{$deadchild});   delete($ChildHash{$deadchild});
  Log("WARNING","Lost child pid= ".$deadchild.   Log("WARNING","Lost child pid= ".$deadchild.
       "Connected to host ".$deadhost);        "Connected to host ".$deadhost);
Line 1628  sub CheckKids { Line 1603  sub CheckKids {
     my $now=time;      my $now=time;
     my $local=localtime($now);      my $local=localtime($now);
     print $fh "LONC status $local - parent $$ \n\n";      print $fh "LONC status $local - parent $$ \n\n";
     foreach $pid (keys %ChildHash) {      foreach my $pid (keys %ChildHash) {
  Debug(2, "Sending USR1 -> $pid");   Debug(2, "Sending USR1 -> $pid");
  kill 'USR1' => $pid; # Tell Child to report status.   kill 'USR1' => $pid; # Tell Child to report status.
  sleep 1; # Wait so file doesn't intermix.   sleep 1; # Wait so file doesn't intermix.
Line 1637  sub CheckKids { Line 1612  sub CheckKids {
   
 =pod  =pod
   
   =head1  UpdateKids
   
   parent's SIGUSR2 handler.  This handler:
   
   =item
   
   Rereads the hosts file.
   
   =item
    
   Kills off (via sigint) children for hosts that have disappeared.
   
   =item
   
   QUITs  children for hosts that already exist (this just forces a status display
   and resets the connection retry count for that host.
   
   =item
   
   Starts new children for hosts that have been added to the hosts.tab file since
   the start of the master program and maintains them.
   
   =cut
   
   sub UpdateKids {
   
       Log("INFO", "Updating connections via SIGUSR2");
   
       #  Just in case we need to kill our own lonc, we wait a few seconds to
       #  give it a chance to receive and relay lond's response to the 
       #  re-init command.
       #
   
       sleep(2); # Wait a couple of seconds.
   
       my %hosts;                   # Indexed by loncapa hostname, value=ip.
       
       # Need to re-read  the host table:
       
       
       LondConnection::ReadConfig();
       my $I = LondConnection::GetHostIterator;
       while (! $I->end()) {
    my $item = $I->get();
    $hosts{$item->[0]} = $item->[4];
    $I->next();
       }
   
       #  The logic below is written for clarity not for efficiency.
       #  Since I anticipate that this function is only rarely called, that's
       #  appropriate.  There are certainly ways to combine the loops below,
       #  and anyone wishing to obscure the logic is welcome to go for it.
       #  Note that we don't re-direct sigchild.  Instead we do what's needed
       #  to the data structures that keep track of children to ensure that
       #  when sigchild is honored, no new child is born.
       #
   
       #  For each existing child; if it's host doesn't exist, kill the child.
   
       foreach my $child (keys %ChildHash) {
    my $oldhost = $ChildHash{$child};
    if (!(exists $hosts{$oldhost})) {
       Log("CRITICAL", "Killing child for $oldhost  host no longer exists");
       delete $ChildHash{$child};
       delete $HostToPid{$oldhost};
       kill 'QUIT' => $child;
    }
       }
       # For each remaining existing child; if it's host's ip has changed,
       # Restart the child on the new IP.
   
       foreach my $child (keys %ChildHash) {
    my $oldhost = $ChildHash{$child};
    my $oldip   = $HostHash{$oldhost};
    if ($hosts{$oldhost} ne $oldip) {
   
       # kill the old child.
   
       Log("CRITICAL", "Killing child for $oldhost host ip has changed...");
       delete $ChildHash{$child};
       delete $HostToPid{$oldhost};
       kill 'QUIT' => $child;
   
       # Do the book-keeping needed to start a new child on the
       # new ip.
   
       $HostHash{$oldhost} = $hosts{$oldhost};
       CreateChild($oldhost);
    }
       }
       # Finally, for each new host, not in the host hash, create a
       # enter the host and create a new child.
       # Force a status display of any existing process.
   
       foreach my $host (keys %hosts) {
    if(!(exists $HostHash{$host})) {
       Log("INFO", "New host $host discovered in hosts.tab...");
       $HostHash{$host} = $hosts{$host};
       CreateChild($host);
    } else {
       kill 'HUP' => $HostToPid{$host};    # status display.
    }
       }
   }
   
   
   =pod
   
 =head1 Restart  =head1 Restart
   
 Signal handler for HUP... all children are killed and  Signal handler for HUP... all children are killed and
Line 1646  the config file. Line 1729  the config file.
 =cut  =cut
   
 sub Restart {  sub Restart {
     KillThemAll; # First kill all the children.      &KillThemAll; # First kill all the children.
     Log("CRITICAL", "Restarting");      Log("CRITICAL", "Restarting");
     my $execdir = $perlvar{'lonDaemons'};      my $execdir = $perlvar{'lonDaemons'};
     unlink("$execdir/logs/lonc.pid");      unlink("$execdir/logs/lonc.pid");
     exec("$execdir/lonc");      exec("$execdir/loncnew");
 }  }
   
 =pod  =pod
Line 1665  SIGHUP.  Responds to sigint and sigterm. Line 1748  SIGHUP.  Responds to sigint and sigterm.
 sub KillThemAll {  sub KillThemAll {
     Debug(2, "Kill them all!!");      Debug(2, "Kill them all!!");
     local($SIG{CHLD}) = 'IGNORE';      # Our children >will< die.      local($SIG{CHLD}) = 'IGNORE';      # Our children >will< die.
     foreach $pid (keys %ChildHash) {      foreach my $pid (keys %ChildHash) {
  my $serving = $ChildHash{$pid};   my $serving = $ChildHash{$pid};
  Debug(2, "Killing lonc for $serving pid = $pid");   Debug(2, "Killing lonc for $serving pid = $pid");
  ShowStatus("Killing lonc for $serving pid = $pid");   ShowStatus("Killing lonc for $serving pid = $pid");
Removed from v.1.22  
changed lines
  Added in v.1.39

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>