[BACK]Return to loncnew CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom

Diff for /loncom/loncnew between versions 1.33 and 1.51

version 1.33, 2003/11/25 10:14:40 version 1.51, 2004/08/26 12:35:10
Line 35 Line 35
 #    - Add ability to create/negotiate lond connections (done).  #    - Add ability to create/negotiate lond connections (done).
 #    - Add general logic for dispatching requests and timeouts. (done).  #    - Add general logic for dispatching requests and timeouts. (done).
 #    - Add support for the lonc/lond requests.          (done).  #    - Add support for the lonc/lond requests.          (done).
 #    - Add logging/status monitoring.  #    - Add logging/status monitoring.                    (done)
 #    - Add Signal handling - HUP restarts. USR1 status report.  #    - Add Signal handling - HUP restarts. USR1 status report. (done)
 #    - Add Configuration file I/O                       (done).  #    - Add Configuration file I/O                       (done).
 #    - Add management/status request interface.  #    - Add management/status request interface.         (done)
 #    - Add deferred request capability.                  (done)  #    - Add deferred request capability.                  (done)
 #    - Detect transmission timeouts.  #    - Detect transmission timeouts.                     (done)
 #  #
   
 use strict;  use strict;
Line 63  use LONCAPA::Configuration; Line 63  use LONCAPA::Configuration;
 use LONCAPA::HashIterator;  use LONCAPA::HashIterator;
   
   
 #  
 #   Disable all signals we might receive from outside for now.  
 #  
   
   
 # Read the httpd configuration file to get perl variables  # Read the httpd configuration file to get perl variables
 # normally set in apache modules:  # normally set in apache modules:
   
Line 87  my $ClientConnection = 0; # Uniquifier f Line 82  my $ClientConnection = 0; # Uniquifier f
   
 my $DebugLevel = 0;  my $DebugLevel = 0;
 my $NextDebugLevel= 2; # So Sigint can toggle this.  my $NextDebugLevel= 2; # So Sigint can toggle this.
 my $IdleTimeout= 3600; # Wait an hour before pruning connections.  my $IdleTimeout= 600; # Wait 10 minutes before pruning connections.
   
   my $LogTransactions = 0; # When True, all transactions/replies get logged.
   
 #  #
 #  The variables below are only used by the child processes.  #  The variables below are only used by the child processes.
Line 105  my $Status          = ""; # Current stat Line 102  my $Status          = ""; # Current stat
 my $RecentLogEntry  = "";  my $RecentLogEntry  = "";
 my $ConnectionRetries=2; # Number of connection retries allowed.  my $ConnectionRetries=2; # Number of connection retries allowed.
 my $ConnectionRetriesLeft=2; # Number of connection retries remaining.  my $ConnectionRetriesLeft=2; # Number of connection retries remaining.
   my $LondVersion     = "unknown"; # Version of lond we talk with.
   my $KeyMode         = "";       # e.g. ssl, local, insecure from last connect.
   
   my $LongTickLength  = 10000000; #Tick Frequency when Idle
   my $ShortTickLength = 1;        #Tick Frequency when Active (many places in
                                   # the code assume this is one)
   my $TickLength      = $ShortTickLength;#number of seconds to wait until ticking
 #  #
 #   The hash below gives the HTML format for log messages  #   The hash below gives the HTML format for log messages
 #   given a severity.  #   given a severity.
 #      #    
 my %LogFormats;  my %LogFormats;
   
 $LogFormats{"CRITICAL"} = "<font color=red>CRITICAL: %s</font>";  $LogFormats{"CRITICAL"} = "<font color='red'>CRITICAL: %s</font>";
 $LogFormats{"SUCCESS"}  = "<font color=green>SUCCESS: %s</font>";  $LogFormats{"SUCCESS"}  = "<font color='green'>SUCCESS: %s</font>";
 $LogFormats{"INFO"}     = "<font color=yellow>INFO: %s</font>";  $LogFormats{"INFO"}     = "<font color='yellow'>INFO: %s</font>";
 $LogFormats{"WARNING"}  = "<font color=blue>WARNING: %s</font>";  $LogFormats{"WARNING"}  = "<font color='blue'>WARNING: %s</font>";
 $LogFormats{"DEFAULT"}  = " %s ";  $LogFormats{"DEFAULT"}  = " %s ";
   
   
Line 158  host and the time will be formatted into Line 161  host and the time will be formatted into
 =cut  =cut
   
 sub Log {  sub Log {
     my $severity = shift;  
     my $message  = shift;      my ($severity, $message) = @_;
      
     if(!$LogFormats{$severity}) {      if(!$LogFormats{$severity}) {
  $severity = "DEFAULT";   $severity = "DEFAULT";
     }      }
Line 195  Returns the name of the host that a sock Line 198  Returns the name of the host that a sock
 =cut  =cut
   
 sub GetPeername {  sub GetPeername {
     my $connection = shift;  
     my $AdrFamily  = shift;  
       my ($connection, $AdrFamily) = @_;
   
     my $peer       = $connection->peername();      my $peer       = $connection->peername();
     my $peerport;      my $peerport;
     my $peerip;      my $peerip;
Line 210  sub GetPeername { Line 215  sub GetPeername {
  return $peerfile;   return $peerfile;
     }      }
 }  }
 #----------------------------- Timer management ------------------------  
 =pod  =pod
   
 =head2 Debug  =head2 Debug
Line 220  Invoked to issue a debug message. Line 224  Invoked to issue a debug message.
 =cut  =cut
   
 sub Debug {  sub Debug {
     my $level   = shift;  
     my $message = shift;      my ($level, $message) = @_;
   
     if ($level <= $DebugLevel) {      if ($level <= $DebugLevel) {
  Log("INFO", "-Debug- $message host = $RemoteHost");   Log("INFO", "-Debug- $message host = $RemoteHost");
     }      }
 }  }
   
 sub SocketDump {  sub SocketDump {
     my $level = shift;  
     my $socket= shift;      my ($level, $socket) = @_;
   
     if($level <= $DebugLevel) {      if($level <= $DebugLevel) {
  $socket->Dump();   $socket->Dump(-1); # Ensure it will get dumped.
     }      }
 }  }
   
Line 262  sub ShowStatus { Line 268  sub ShowStatus {
 =cut  =cut
 sub SocketTimeout {  sub SocketTimeout {
     my $Socket = shift;      my $Socket = shift;
           Log("WARNING", "A socket timeout was detected");
       Debug(0, " SocketTimeout called: ");
       $Socket->Dump(0);
       if(exists($ActiveTransactions{$Socket})) {
    FailTransaction($ActiveTransactions{$Socket});
       }
     KillSocket($Socket); # A transaction timeout also counts as      KillSocket($Socket); # A transaction timeout also counts as
                                 # a connection failure:                                  # a connection failure:
     $ConnectionRetriesLeft--;      $ConnectionRetriesLeft--;
       if($ConnectionRetriesLeft <= 0) {
    Log("CRITICAL", "Host marked dead: ".GetServerHost());
       }
   
 }  }
   #----------------------------- Timer management ------------------------
   
 =pod  =pod
   
Line 281  sub Tick { Line 297  sub Tick {
     my $client;      my $client;
     if($ConnectionRetriesLeft > 0) {      if($ConnectionRetriesLeft > 0) {
  ShowStatus(GetServerHost()." Connection count: ".$ConnectionCount   ShowStatus(GetServerHost()." Connection count: ".$ConnectionCount
    ." Retries remaining: ".$ConnectionRetriesLeft);     ." Retries remaining: ".$ConnectionRetriesLeft
      ." ($KeyMode)");
     } else {      } else {
  ShowStatus(GetServerHost()." >> DEAD <<");   ShowStatus(GetServerHost()." >> DEAD <<");
     }      }
Line 290  sub Tick { Line 307  sub Tick {
   
     if($IdleConnections->Count()  &&       if($IdleConnections->Count()  && 
        ($WorkQueue->Count() == 0)) { # Idle connections and nothing to do?         ($WorkQueue->Count() == 0)) { # Idle connections and nothing to do?
  $IdleSeconds++;   $IdleSeconds+=$TickLength;
  if($IdleSeconds > $IdleTimeout) { # Prune a connection...   if($IdleSeconds > $IdleTimeout) { # Prune a connection...
     my $Socket = $IdleConnections->pop();      my $Socket = $IdleConnections->pop();
     KillSocket($Socket);      KillSocket($Socket);
       if ($IdleConnections->Count() == 0) {
    &SetupTimer($LongTickLength);
       }
  }   }
     } else {      } else {
  $IdleSeconds = 0; # Reset idle count if not idle.   $IdleSeconds = 0; # Reset idle count if not idle.
Line 301  sub Tick { Line 321  sub Tick {
     #      #
     #  For each inflight transaction, tick down its timeout counter.      #  For each inflight transaction, tick down its timeout counter.
     #      #
     foreach my $item (keys %ActiveTransactions) {  
  my $Socket = $ActiveTransactions{$item}->getServer();      foreach my $item (keys %ActiveConnections) {
  $Socket->Tick();   my $State = $ActiveConnections{$item}->data->GetState();
    if ($State ne 'Idle') {
       Debug(5,"Ticking Socket $State $item");
       $ActiveConnections{$item}->data->Tick();
    }
     }      }
     # Do we have work in the queue, but no connections to service them?      # Do we have work in the queue, but no connections to service them?
     # If so, try to make some new connections to get things going again.      # If so, try to make some new connections to get things going again.
Line 322  sub Tick { Line 346  sub Tick {
     if($successCount == 0) { # All connections failed:      if($successCount == 0) { # All connections failed:
  Debug(5,"Work in queue failed to make any connectiouns\n");   Debug(5,"Work in queue failed to make any connectiouns\n");
  EmptyQueue(); # Fail pending transactions with con_lost.   EmptyQueue(); # Fail pending transactions with con_lost.
    CloseAllLondConnections(); # Should all be closed but....
     }      }
  } else {   } else {
     ShowStatus(GetServerHost()." >>> DEAD!!! <<<");      ShowStatus(GetServerHost()." >>> DEAD!!! <<<");
     Debug(5,"Work in queue, but gave up on connections..flushing\n");      Debug(5,"Work in queue, but gave up on connections..flushing\n");
     EmptyQueue(); # Connections can't be established.      EmptyQueue(); # Connections can't be established.
       CloseAllLondConnections(); # Should all already be closed but...
  }   }
                 
     }      }
       if ($ConnectionCount == 0) {
    $KeyMode = ""; 
       }
 }  }
   
 =pod  =pod
Line 348  Trigger disconnections of idle sockets. Line 377  Trigger disconnections of idle sockets.
   
 =cut  =cut
   
   my $timer;
 sub SetupTimer {  sub SetupTimer {
     Debug(6, "SetupTimer");      my ($newLength)=@_;
     Event->timer(interval => 1, cb => \&Tick );      Debug(6, "SetupTimer $TickLength->$newLength");
       $TickLength=$newLength;
       if ($timer) { $timer->cancel; }
       $timer=Event->timer(interval => $TickLength, cb => \&Tick );
 }  }
   
 =pod  =pod
Line 370  long enough, it will be shut down and re Line 403  long enough, it will be shut down and re
   
 sub ServerToIdle {  sub ServerToIdle {
     my $Socket   = shift; # Get the socket.      my $Socket   = shift; # Get the socket.
       $KeyMode = $Socket->{AuthenticationMode};
     delete($ActiveTransactions{$Socket}); # Server has no transaction      delete($ActiveTransactions{$Socket}); # Server has no transaction
   
     &Debug(5, "Server to idle");      &Debug(5, "Server to idle");
Line 502  The transaction that is being completed. Line 536  The transaction that is being completed.
   
 sub CompleteTransaction {  sub CompleteTransaction {
     &Debug(5,"Complete transaction");      &Debug(5,"Complete transaction");
     my $Socket = shift;  
     my $Transaction = shift;      my ($Socket, $Transaction) = @_;
   
     if (!$Transaction->isDeferred()) { # Normal transaction      if (!$Transaction->isDeferred()) { # Normal transaction
  my $data   = $Socket->GetReply(); # Data to send.   my $data   = $Socket->GetReply(); # Data to send.
    if($LogTransactions) {
       Log("SUCCESS", "Reply from lond: '$data'");
    }
  StartClientReply($Transaction, $data);   StartClientReply($Transaction, $data);
     } else { # Delete deferred transaction file.      } else { # Delete deferred transaction file.
  Log("SUCCESS", "A delayed transaction was completed");   Log("SUCCESS", "A delayed transaction was completed");
Line 514  sub CompleteTransaction { Line 551  sub CompleteTransaction {
  unlink $Transaction->getFile();   unlink $Transaction->getFile();
     }      }
 }  }
   
 =pod  =pod
   
 =head1 StartClientReply  =head1 StartClientReply
   
    Initiates a reply to a client where the reply data is a parameter.     Initiates a reply to a client where the reply data is a parameter.
Line 530  sub CompleteTransaction { Line 569  sub CompleteTransaction {
     The data to send to apached client.      The data to send to apached client.
   
 =cut  =cut
   
 sub StartClientReply {  sub StartClientReply {
     my $Transaction   = shift;  
     my $data     = shift;  
   
       my ($Transaction, $data) = @_;
   
     my $Client   = $Transaction->getClient();      my $Client   = $Transaction->getClient();
   
Line 547  sub StartClientReply { Line 586  sub StartClientReply {
       cb       => \&ClientWritable,        cb       => \&ClientWritable,
       data     => $data);        data     => $data);
 }  }
   
 =pod  =pod
   
 =head2 FailTransaction  =head2 FailTransaction
   
   Finishes a transaction with failure because the associated lond socket    Finishes a transaction with failure because the associated lond socket
Line 557  sub StartClientReply { Line 598  sub StartClientReply {
   - The transaction is 'live' in which case we initiate the sending    - The transaction is 'live' in which case we initiate the sending
     of "con_lost" to the client.      of "con_lost" to the client.
   
 Deleting the transaction means killing it from the   Deleting the transaction means killing it from the %ActiveTransactions hash.
 %ActiveTransactions hash.  
   
 Parameters:  Parameters:
   
Line 566  Parameters: Line 606  Parameters:
     
    The LondTransaction we are failing.     The LondTransaction we are failing.
     
   
 =cut  =cut
   
 sub FailTransaction {  sub FailTransaction {
Line 577  sub FailTransaction { Line 618  sub FailTransaction {
  Debug(1," Replying con_lost to ".$transaction->getRequest());   Debug(1," Replying con_lost to ".$transaction->getRequest());
  StartClientReply($transaction, "con_lost\n");   StartClientReply($transaction, "con_lost\n");
     }      }
     if($ConnectionRetriesLeft <= 0) {  
  Log("CRITICAL", "Host marked dead: ".GetServerHost());  
     }  
   
 }  }
   
Line 607  Close all connections open on lond prior Line 645  Close all connections open on lond prior
 =cut  =cut
 sub CloseAllLondConnections {  sub CloseAllLondConnections {
     foreach my $Socket (keys %ActiveConnections) {      foreach my $Socket (keys %ActiveConnections) {
  KillSocket($Socket);        if(exists($ActiveTransactions{$Socket})) {
    FailTransaction($ActiveTransactions{$Socket});
         }
         KillSocket($Socket);
     }      }
 }  }
 =cut  =cut
Line 651  sub KillSocket { Line 692  sub KillSocket {
     }      }
     if(exists($ActiveConnections{$Socket})) {      if(exists($ActiveConnections{$Socket})) {
  delete($ActiveConnections{$Socket});   delete($ActiveConnections{$Socket});
    $ConnectionCount--;
    if ($ConnectionCount < 0) { $ConnectionCount = 0; }
     }      }
     $ConnectionCount--;  
   
     #  If the connection count has gone to zero and there is work in the      #  If the connection count has gone to zero and there is work in the
     #  work queue, the work all gets failed with con_lost.      #  work queue, the work all gets failed with con_lost.
     #      #
     if($ConnectionCount == 0) {      if($ConnectionCount == 0) {
  EmptyQueue();   EmptyQueue();
    CloseAllLondConnections; # Should all already be closed but...
     }      }
 }  }
   
Line 684  The connection must echo the challenge b Line 726  The connection must echo the challenge b
 The challenge has been replied to.  The we are receiveing the   The challenge has been replied to.  The we are receiveing the 
 'ok' from the partner.  'ok' from the partner.
   
   =head3  State=ReadingVersionString
   
   We have requested the lond version and are reading the
   version back.  Upon completion, we'll store the version away
   for future use(?).
   
   =head3 State=HostSet
   
   We have selected the domain name of our peer (multhomed hosts)
   and are getting the reply (presumably ok) back.
   
 =head3 State=RequestingKey  =head3 State=RequestingKey
   
 The ok has been received and we need to send the request for  The ok has been received and we need to send the request for
Line 738  sub LondReadable { Line 791  sub LondReadable {
     &Debug(2, "Socket->Readable returned: $status");      &Debug(2, "Socket->Readable returned: $status");
   
     if($status != 0) {      if($status != 0) {
  # bad return from socket read. Currently this means that   # bad return from socket read. Currently this means that
  # The socket has become disconnected. We fail the transaction.   # The socket has become disconnected. We fail the transaction.
   
  Log("WARNING",   Log("WARNING",
Line 756  sub LondReadable { Line 809  sub LondReadable {
     $State = $Socket->GetState(); # Update in case of transition.      $State = $Socket->GetState(); # Update in case of transition.
     &Debug(6, "After read, state is ".$State);      &Debug(6, "After read, state is ".$State);
   
    if($State eq "Initialized") {      if($State eq "Initialized") {
   
   
     } elsif ($State eq "ChallengeReceived") {      } elsif ($State eq "ChallengeReceived") {
  #  The challenge must be echoed back;  The state machine   #  The challenge must be echoed back;  The state machine
  # in the connection takes care of setting that up.  Just   # in the connection takes care of setting that up.  Just
  # need to transition to writable:   # need to transition to writable:
   
  $Watcher->cb(\&LondWritable);   $Watcher->cb(\&LondWritable);
  $Watcher->poll("w");   $Watcher->poll("w");
   
     } elsif ($State eq "ChallengeReplied") {      } elsif ($State eq "ChallengeReplied") {
   
       } elsif ($State eq "RequestingVersion") {
    # Need to ask for the version... that is writiability:
   
    $Watcher->cb(\&LondWritable);
    $Watcher->poll("w");
   
       } elsif ($State eq "ReadingVersionString") {
    # Read the rest of the version string... 
       } elsif ($State eq "SetHost") {
    # Need to request the actual domain get set...
   
    $Watcher->cb(\&LondWritable);
    $Watcher->poll("w");
       } elsif ($State eq "HostSet") {
    # Reading the 'ok' from the peer.
   
     } elsif ($State eq "RequestingKey") {      } elsif ($State eq "RequestingKey") {
  #  The ok was received.  Now we need to request the key   #  The ok was received.  Now we need to request the key
Line 780  sub LondReadable { Line 848  sub LondReadable {
     } elsif ($State eq "ReceivingKey") {      } elsif ($State eq "ReceivingKey") {
   
     } elsif ($State eq "Idle") {      } elsif ($State eq "Idle") {
      
    # This is as good a spot as any to get the peer version
    # string:
      
    if($LondVersion eq "unknown") {
       $LondVersion = $Socket->PeerVersion();
       Log("INFO", "Connected to lond version: $LondVersion");
    }
  # If necessary, complete a transaction and then go into the   # If necessary, complete a transaction and then go into the
  # idle queue.   # idle queue.
  #  Note that a trasition to idle indicates a live lond   #  Note that a trasition to idle indicates a live lond
Line 809  sub LondReadable { Line 885  sub LondReadable {
   
   
     } else {      } else {
  # Invalid state.   # Invalid state.
  Debug(4, "Invalid state in LondReadable");   Debug(4, "Invalid state in LondReadable");
     }      }
 }  }
Line 891  sub LondWritable { Line 967  sub LondWritable {
   
     SocketDump(6,$Socket);      SocketDump(6,$Socket);
   
     if      ($State eq "Connected")         {      #  If the socket is writable, we must always write.
       # Only by writing will we undergo state transitions.
  if ($Socket->Writable() != 0) {      # Old logic wrote in state specific code below, however
     #  The write resulted in an error.      # That forces us at least through another invocation of
     # We'll treat this as if the socket got disconnected:      # this function after writability is possible again.
     Log("WARNING", "Connection to ".$RemoteHost.      # This logic also factors out common code for handling
  " has been disconnected");      # write failures... in all cases, write failures 
       # Kill the socket.
       #  This logic makes the branches of the >big< if below
       # so that the writing states are actually NO-OPs.
   
       if ($Socket->Writable() != 0) {
    #  The write resulted in an error.
    # We'll treat this as if the socket got disconnected:
    Log("WARNING", "Connection to ".$RemoteHost.
       " has been disconnected");
    if(exists($ActiveTransactions{$Socket})) {
     FailTransaction($ActiveTransactions{$Socket});      FailTransaction($ActiveTransactions{$Socket});
     $Watcher->cancel();  
     KillSocket($Socket);  
     return;  
  }   }
  #  "init" is being sent...   $Watcher->cancel();
    KillSocket($Socket);
    return;
       }
   
   
   
       if      ($State eq "Connected")         {
   
    #  "init" is being sent...
    
     } elsif ($State eq "Initialized")       {      } elsif ($State eq "Initialized")       {
   
  # Now that init was sent, we switch    # Now that init was sent, we switch 
Line 913  sub LondWritable { Line 1004  sub LondWritable {
   
  $Watcher->cb(\&LondReadable);   $Watcher->cb(\&LondReadable);
  $Watcher->poll("r");   $Watcher->poll("r");
   
     } elsif ($State eq "ChallengeReceived") {      } elsif ($State eq "ChallengeReceived") {
  # We received the challenge, now we    # We received the challenge, now we 
  # are echoing it back. This is a no-op,   # are echoing it back. This is a no-op,
  # we're waiting for the state to change   # we're waiting for the state to change
   
  if($Socket->Writable() != 0) {  
   
     $Watcher->cancel();  
     KillSocket($Socket);  
     return;  
  }  
   
     } elsif ($State eq "ChallengeReplied")  {      } elsif ($State eq "ChallengeReplied")  {
  # The echo was sent back, so we switch   # The echo was sent back, so we switch
  # to watching readability.   # to watching readability.
   
  $Watcher->cb(\&LondReadable);   $Watcher->cb(\&LondReadable);
  $Watcher->poll("r");   $Watcher->poll("r");
       } elsif ($State eq "RequestingVersion") {
    # Sending the peer a version request...
   
       } elsif ($State eq "ReadingVersionString") {
    # Transition to read since we have sent the
    # version command and now just need to read the
    # version string from the peer:
         
    $Watcher->cb(\&LondReadable);
    $Watcher->poll("r");
         
       } elsif ($State eq "SetHost") {
    #  Setting the remote domain...
   
       } elsif ($State eq "HostSet") {
    # Back to readable to get the ok.
         
    $Watcher->cb(\&LondReadable);
    $Watcher->poll("r");
         
   
     } elsif ($State eq "RequestingKey")     {      } elsif ($State eq "RequestingKey")     {
  # At this time we're requesting the key.   # At this time we're requesting the key.
  # again, this is essentially a no-op.   # again, this is essentially a no-op.
  # we'll write the next chunk until the  
  # state changes.  
   
  if($Socket->Writable() != 0) {  
     # Write resulted in an error.  
   
     $Watcher->cancel();  
     KillSocket($Socket);  
     return;  
   
  }  
     } elsif ($State eq "ReceivingKey")      {      } elsif ($State eq "ReceivingKey")      {
  # Now we need to wait for the key   # Now we need to wait for the key
  # to come back from the peer:   # to come back from the peer:
Line 955  sub LondWritable { Line 1049  sub LondWritable {
  $Watcher->poll("r");   $Watcher->poll("r");
   
     } elsif ($State eq "SendingRequest")    {      } elsif ($State eq "SendingRequest")    {
    
  # At this time we are sending a request to the   # At this time we are sending a request to the
  # peer... write the next chunk:   # peer... write the next chunk:
   
  if($Socket->Writable() != 0) {  
   
     if(exists($ActiveTransactions{$Socket})) {  
  Debug(3, "Lond connection lost, failing transactions");  
  FailTransaction($ActiveTransactions{$Socket});  
     }  
     $Watcher->cancel();  
     KillSocket($Socket);  
     return;  
       
  }  
   
     } elsif ($State eq "ReceivingReply")    {      } elsif ($State eq "ReceivingReply")    {
  # The send has completed.  Wait for the   # The send has completed.  Wait for the
Line 1100  The text of the request to send. Line 1184  The text of the request to send.
 =cut  =cut
   
 sub StartRequest {  sub StartRequest {
     my $Lond     = shift;  
     my $Request  = shift; # This is a LondTransaction.      my ($Lond, $Request) = @_;
           
     Debug(6, "StartRequest: ".$Request->getRequest());      Debug(6, "StartRequest: ".$Request->getRequest());
   
Line 1157  sub QueueTransaction { Line 1241  sub QueueTransaction {
  Debug(5,"Starting additional lond connection");   Debug(5,"Starting additional lond connection");
  if(MakeLondConnection() == 0) {   if(MakeLondConnection() == 0) {
     EmptyQueue(); # Fail transactions, can't make connection.      EmptyQueue(); # Fail transactions, can't make connection.
       CloseAllLondConnections; # Should all be closed but...
  }   }
    &SetupTimer($ShortTickLength);
     } else {      } else {
  ShowStatus(GetServerHost()." >>> DEAD !!!! <<<");   ShowStatus(GetServerHost()." >>> DEAD !!!! <<<");
  EmptyQueue(); # It's worse than that ... he's dead Jim.   EmptyQueue(); # It's worse than that ... he's dead Jim.
    CloseAllLondConnections; # Should all be closed but..
     }      }
  }   }
     } else { # Can start the request:      } else { # Can start the request:
Line 1203  sub ClientRequest { Line 1290  sub ClientRequest {
     Debug(8,"Data: ".$data." this read: ".$thisread);      Debug(8,"Data: ".$data." this read: ".$thisread);
     $data = $data.$thisread; # Append new data.      $data = $data.$thisread; # Append new data.
     $watcher->data($data);      $watcher->data($data);
     if($data =~ /(.*\n)/) { # Request entirely read.      if($data =~ /\n$/) { # Request entirely read.
  if($data eq "close_connection_exit\n") {   if($data eq "close_connection_exit\n") {
     Log("CRITICAL",      Log("CRITICAL",
  "Request Close Connection ... exiting");   "Request Close Connection ... exiting");
Line 1211  sub ClientRequest { Line 1298  sub ClientRequest {
     exit;      exit;
  }   }
  Debug(8, "Complete transaction received: ".$data);   Debug(8, "Complete transaction received: ".$data);
    if($LogTransactions) {
       Log("SUCCESS", "Transaction: '$data'"); # Transaction has \n.
    }
  my $Transaction = LondTransaction->new($data);   my $Transaction = LondTransaction->new($data);
  $Transaction->SetClient($socket);   $Transaction->SetClient($socket);
  QueueTransaction($Transaction);   QueueTransaction($Transaction);
Line 1319  sub SetupLoncListener { Line 1409  sub SetupLoncListener {
       fd     => $socket);        fd     => $socket);
 }  }
   
   #
   #   Toggle transaction logging.
   #  Implicit inputs:  
   #     LogTransactions
   #  Implicit Outputs:
   #     LogTransactions
   sub ToggleTransactionLogging {
       print STDERR "Toggle transaction logging...\n";
       if(!$LogTransactions) {
    $LogTransactions = 1;
       } else {
    $LogTransactions = 0;
       }
   
   
       Log("SUCCESS", "Toggled transaction logging: $LogTransactions \n");
   }
   
 =pod   =pod 
   
 =head2 ChildStatus  =head2 ChildStatus
Line 1329  into the status file. Line 1437  into the status file.
 We also use this to reset the retries count in order to allow the  We also use this to reset the retries count in order to allow the
 client to retry connections with a previously dead server.  client to retry connections with a previously dead server.
 =cut  =cut
   
 sub ChildStatus {  sub ChildStatus {
     my $event = shift;      my $event = shift;
     my $watcher = $event->w;      my $watcher = $event->w;
Line 1338  sub ChildStatus { Line 1447  sub ChildStatus {
     my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt");      my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt");
     print $fh $$."\t".$RemoteHost."\t".$Status."\t".      print $fh $$."\t".$RemoteHost."\t".$Status."\t".
  $RecentLogEntry."\n";   $RecentLogEntry."\n";
       #
       #  Write out information about each of the connections:
       #
       if ($DebugLevel > 2) {
    print $fh "Active connection statuses: \n";
    my $i = 1;
    print STDERR  "================================= Socket Status Dump:\n";
    foreach my $item (keys %ActiveConnections) {
       my $Socket = $ActiveConnections{$item}->data;
       my $state  = $Socket->GetState();
       print $fh "Connection $i State: $state\n";
       print STDERR "---------------------- Connection $i \n";
       $Socket->Dump(-1); # Ensure it gets dumped..
       $i++;
    }
       }
     $ConnectionRetriesLeft = $ConnectionRetries;      $ConnectionRetriesLeft = $ConnectionRetries;
 }  }
   
Line 1402  sub ChildProcess { Line 1527  sub ChildProcess {
     Event->signal(signal   => "USR1",      Event->signal(signal   => "USR1",
   cb       => \&ChildStatus,    cb       => \&ChildStatus,
   data     => "USR1");    data     => "USR1");
       Event->signal(signal   => "USR2",
     cb       => \&ToggleTransactionLogging);
     Event->signal(signal   => "INT",      Event->signal(signal   => "INT",
   cb       => \&ToggleDebug,    cb       => \&ToggleDebug,
   data     => "INT");    data     => "INT");
   
     SetupTimer();      SetupTimer($LongTickLength);
           
     SetupLoncListener();      SetupLoncListener();
           
Removed from v.1.33  
changed lines
  Added in v.1.51

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>