--- loncom/loncnew 2003/11/21 19:27:18 1.32 +++ loncom/loncnew 2004/06/17 22:37:06 1.49 @@ -2,7 +2,7 @@ # The LearningOnline Network with CAPA # lonc maintains the connections to remote computers # -# $Id: loncnew,v 1.32 2003/11/21 19:27:18 albertel Exp $ +# $Id: loncnew,v 1.49 2004/06/17 22:37:06 foxr Exp $ # # Copyright Michigan State University Board of Trustees # @@ -35,12 +35,12 @@ # - Add ability to create/negotiate lond connections (done). # - Add general logic for dispatching requests and timeouts. (done). # - Add support for the lonc/lond requests. (done). -# - Add logging/status monitoring. -# - Add Signal handling - HUP restarts. USR1 status report. +# - Add logging/status monitoring. (done) +# - Add Signal handling - HUP restarts. USR1 status report. (done) # - Add Configuration file I/O (done). -# - Add management/status request interface. +# - Add management/status request interface. (done) # - Add deferred request capability. (done) -# - Detect transmission timeouts. +# - Detect transmission timeouts. (done) # use strict; @@ -63,11 +63,6 @@ use LONCAPA::Configuration; use LONCAPA::HashIterator; -# -# Disable all signals we might receive from outside for now. -# - - # Read the httpd configuration file to get perl variables # normally set in apache modules: @@ -89,6 +84,8 @@ my $DebugLevel = 0; my $NextDebugLevel= 2; # So Sigint can toggle this. my $IdleTimeout= 3600; # Wait an hour before pruning connections. +my $LogTransactions = 0; # When True, all transactions/replies get logged. + # # The variables below are only used by the child processes. # @@ -105,6 +102,8 @@ my $Status = ""; # Current stat my $RecentLogEntry = ""; my $ConnectionRetries=2; # Number of connection retries allowed. my $ConnectionRetriesLeft=2; # Number of connection retries remaining. +my $LondVersion = "unknown"; # Version of lond we talk with. +my $KeyMode = ""; # e.g. ssl, local, insecure from last connect. # # The hash below gives the HTML format for log messages @@ -112,10 +111,10 @@ my $ConnectionRetriesLeft=2; # Number of # my %LogFormats; -$LogFormats{"CRITICAL"} = "CRITICAL: %s"; -$LogFormats{"SUCCESS"} = "SUCCESS: %s"; -$LogFormats{"INFO"} = "INFO: %s"; -$LogFormats{"WARNING"} = "WARNING: %s"; +$LogFormats{"CRITICAL"} = "CRITICAL: %s"; +$LogFormats{"SUCCESS"} = "SUCCESS: %s"; +$LogFormats{"INFO"} = "INFO: %s"; +$LogFormats{"WARNING"} = "WARNING: %s"; $LogFormats{"DEFAULT"} = " %s "; @@ -158,9 +157,9 @@ host and the time will be formatted into =cut sub Log { - my $severity = shift; - my $message = shift; - + + my ($severity, $message) = @_; + if(!$LogFormats{$severity}) { $severity = "DEFAULT"; } @@ -195,8 +194,10 @@ Returns the name of the host that a sock =cut sub GetPeername { - my $connection = shift; - my $AdrFamily = shift; + + + my ($connection, $AdrFamily) = @_; + my $peer = $connection->peername(); my $peerport; my $peerip; @@ -210,7 +211,6 @@ sub GetPeername { return $peerfile; } } -#----------------------------- Timer management ------------------------ =pod =head2 Debug @@ -220,18 +220,20 @@ Invoked to issue a debug message. =cut sub Debug { - my $level = shift; - my $message = shift; + + my ($level, $message) = @_; + if ($level <= $DebugLevel) { Log("INFO", "-Debug- $message host = $RemoteHost"); } } sub SocketDump { - my $level = shift; - my $socket= shift; + + my ($level, $socket) = @_; + if($level <= $DebugLevel) { - $socket->Dump(); + $socket->Dump(-1); # Ensure it will get dumped. } } @@ -262,11 +264,21 @@ sub ShowStatus { =cut sub SocketTimeout { my $Socket = shift; - + Log("WARNING", "A socket timeout was detected"); + Debug(0, " SocketTimeout called: "); + $Socket->Dump(0); + if(exists($ActiveTransactions{$Socket})) { + FailTransaction($ActiveTransactions{$Socket}); + } KillSocket($Socket); # A transaction timeout also counts as # a connection failure: $ConnectionRetriesLeft--; + if($ConnectionRetriesLeft <= 0) { + Log("CRITICAL", "Host marked dead: ".GetServerHost()); + } + } +#----------------------------- Timer management ------------------------ =pod @@ -281,7 +293,8 @@ sub Tick { my $client; if($ConnectionRetriesLeft > 0) { ShowStatus(GetServerHost()." Connection count: ".$ConnectionCount - ." Retries remaining: ".$ConnectionRetriesLeft); + ." Retries remaining: ".$ConnectionRetriesLeft + ." ($KeyMode)"); } else { ShowStatus(GetServerHost()." >> DEAD <<"); } @@ -301,9 +314,13 @@ sub Tick { # # For each inflight transaction, tick down its timeout counter. # - foreach my $item (keys %ActiveTransactions) { - my $Socket = $ActiveTransactions{$item}->getServer(); - $Socket->Tick(); + + foreach my $item (keys %ActiveConnections) { + my $State = $ActiveConnections{$item}->data->GetState(); + if ($State ne 'Idle') { + Debug(5,"Ticking Socket $State $item"); + $ActiveConnections{$item}->data->Tick(); + } } # Do we have work in the queue, but no connections to service them? # If so, try to make some new connections to get things going again. @@ -322,14 +339,19 @@ sub Tick { if($successCount == 0) { # All connections failed: Debug(5,"Work in queue failed to make any connectiouns\n"); EmptyQueue(); # Fail pending transactions with con_lost. + CloseAllLondConnections(); # Should all be closed but.... } } else { ShowStatus(GetServerHost()." >>> DEAD!!! <<<"); Debug(5,"Work in queue, but gave up on connections..flushing\n"); EmptyQueue(); # Connections can't be established. + CloseAllLondConnections(); # Should all already be closed but... } } + if ($ConnectionCount == 0) { + $KeyMode = ""; + } } =pod @@ -350,7 +372,7 @@ Trigger disconnections of idle sockets. sub SetupTimer { Debug(6, "SetupTimer"); - Event->timer(interval => 1, debug => 1, cb => \&Tick ); + Event->timer(interval => 1, cb => \&Tick ); } =pod @@ -370,6 +392,7 @@ long enough, it will be shut down and re sub ServerToIdle { my $Socket = shift; # Get the socket. + $KeyMode = $Socket->{AuthenticationMode}; delete($ActiveTransactions{$Socket}); # Server has no transaction &Debug(5, "Server to idle"); @@ -502,11 +525,14 @@ The transaction that is being completed. sub CompleteTransaction { &Debug(5,"Complete transaction"); - my $Socket = shift; - my $Transaction = shift; + + my ($Socket, $Transaction) = @_; if (!$Transaction->isDeferred()) { # Normal transaction my $data = $Socket->GetReply(); # Data to send. + if($LogTransactions) { + Log("SUCCESS", "Reply from lond: '$data'"); + } StartClientReply($Transaction, $data); } else { # Delete deferred transaction file. Log("SUCCESS", "A delayed transaction was completed"); @@ -514,7 +540,9 @@ sub CompleteTransaction { unlink $Transaction->getFile(); } } + =pod + =head1 StartClientReply Initiates a reply to a client where the reply data is a parameter. @@ -530,10 +558,10 @@ sub CompleteTransaction { The data to send to apached client. =cut + sub StartClientReply { - my $Transaction = shift; - my $data = shift; + my ($Transaction, $data) = @_; my $Client = $Transaction->getClient(); @@ -547,7 +575,9 @@ sub StartClientReply { cb => \&ClientWritable, data => $data); } + =pod + =head2 FailTransaction Finishes a transaction with failure because the associated lond socket @@ -557,8 +587,7 @@ sub StartClientReply { - The transaction is 'live' in which case we initiate the sending of "con_lost" to the client. -Deleting the transaction means killing it from the -%ActiveTransactions hash. +Deleting the transaction means killing it from the %ActiveTransactions hash. Parameters: @@ -566,6 +595,7 @@ Parameters: The LondTransaction we are failing. + =cut sub FailTransaction { @@ -577,9 +607,6 @@ sub FailTransaction { Debug(1," Replying con_lost to ".$transaction->getRequest()); StartClientReply($transaction, "con_lost\n"); } - if($ConnectionRetriesLeft <= 0) { - Log("CRITICAL", "Host marked dead: ".GetServerHost()); - } } @@ -607,7 +634,10 @@ Close all connections open on lond prior =cut sub CloseAllLondConnections { foreach my $Socket (keys %ActiveConnections) { - KillSocket($Socket); + if(exists($ActiveTransactions{$Socket})) { + FailTransaction($ActiveTransactions{$Socket}); + } + KillSocket($Socket); } } =cut @@ -651,14 +681,15 @@ sub KillSocket { } if(exists($ActiveConnections{$Socket})) { delete($ActiveConnections{$Socket}); + $ConnectionCount--; + if ($ConnectionCount < 0) { $ConnectionCount = 0; } } - $ConnectionCount--; - # If the connection count has gone to zero and there is work in the # work queue, the work all gets failed with con_lost. # if($ConnectionCount == 0) { EmptyQueue(); + CloseAllLondConnections; # Should all already be closed but... } } @@ -684,6 +715,17 @@ The connection must echo the challenge b The challenge has been replied to. The we are receiveing the 'ok' from the partner. +=head3 State=ReadingVersionString + +We have requested the lond version and are reading the +version back. Upon completion, we'll store the version away +for future use(?). + +=head3 State=HostSet + +We have selected the domain name of our peer (multhomed hosts) +and are getting the reply (presumably ok) back. + =head3 State=RequestingKey The ok has been received and we need to send the request for @@ -738,7 +780,7 @@ sub LondReadable { &Debug(2, "Socket->Readable returned: $status"); if($status != 0) { - # bad return from socket read. Currently this means that + # bad return from socket read. Currently this means that # The socket has become disconnected. We fail the transaction. Log("WARNING", @@ -756,19 +798,34 @@ sub LondReadable { $State = $Socket->GetState(); # Update in case of transition. &Debug(6, "After read, state is ".$State); - if($State eq "Initialized") { + if($State eq "Initialized") { } elsif ($State eq "ChallengeReceived") { # The challenge must be echoed back; The state machine # in the connection takes care of setting that up. Just # need to transition to writable: - + $Watcher->cb(\&LondWritable); $Watcher->poll("w"); } elsif ($State eq "ChallengeReplied") { + } elsif ($State eq "RequestingVersion") { + # Need to ask for the version... that is writiability: + + $Watcher->cb(\&LondWritable); + $Watcher->poll("w"); + + } elsif ($State eq "ReadingVersionString") { + # Read the rest of the version string... + } elsif ($State eq "SetHost") { + # Need to request the actual domain get set... + + $Watcher->cb(\&LondWritable); + $Watcher->poll("w"); + } elsif ($State eq "HostSet") { + # Reading the 'ok' from the peer. } elsif ($State eq "RequestingKey") { # The ok was received. Now we need to request the key @@ -780,6 +837,14 @@ sub LondReadable { } elsif ($State eq "ReceivingKey") { } elsif ($State eq "Idle") { + + # This is as good a spot as any to get the peer version + # string: + + if($LondVersion eq "unknown") { + $LondVersion = $Socket->PeerVersion(); + Log("INFO", "Connected to lond version: $LondVersion"); + } # If necessary, complete a transaction and then go into the # idle queue. # Note that a trasition to idle indicates a live lond @@ -809,7 +874,7 @@ sub LondReadable { } else { - # Invalid state. + # Invalid state. Debug(4, "Invalid state in LondReadable"); } } @@ -891,21 +956,36 @@ sub LondWritable { SocketDump(6,$Socket); - if ($State eq "Connected") { - - if ($Socket->Writable() != 0) { - # The write resulted in an error. - # We'll treat this as if the socket got disconnected: - Log("WARNING", "Connection to ".$RemoteHost. - " has been disconnected"); + # If the socket is writable, we must always write. + # Only by writing will we undergo state transitions. + # Old logic wrote in state specific code below, however + # That forces us at least through another invocation of + # this function after writability is possible again. + # This logic also factors out common code for handling + # write failures... in all cases, write failures + # Kill the socket. + # This logic makes the branches of the >big< if below + # so that the writing states are actually NO-OPs. + + if ($Socket->Writable() != 0) { + # The write resulted in an error. + # We'll treat this as if the socket got disconnected: + Log("WARNING", "Connection to ".$RemoteHost. + " has been disconnected"); + if(exists($ActiveTransactions{$Socket})) { FailTransaction($ActiveTransactions{$Socket}); - $Watcher->cancel(); - KillSocket($Socket); - return; } - # "init" is being sent... + $Watcher->cancel(); + KillSocket($Socket); + return; + } - + + + if ($State eq "Connected") { + + # "init" is being sent... + } elsif ($State eq "Initialized") { # Now that init was sent, we switch @@ -913,40 +993,43 @@ sub LondWritable { $Watcher->cb(\&LondReadable); $Watcher->poll("r"); - + } elsif ($State eq "ChallengeReceived") { # We received the challenge, now we # are echoing it back. This is a no-op, # we're waiting for the state to change - if($Socket->Writable() != 0) { - - $Watcher->cancel(); - KillSocket($Socket); - return; - } - } elsif ($State eq "ChallengeReplied") { # The echo was sent back, so we switch # to watching readability. $Watcher->cb(\&LondReadable); $Watcher->poll("r"); + } elsif ($State eq "RequestingVersion") { + # Sending the peer a version request... + + } elsif ($State eq "ReadingVersionString") { + # Transition to read since we have sent the + # version command and now just need to read the + # version string from the peer: + + $Watcher->cb(\&LondReadable); + $Watcher->poll("r"); + + } elsif ($State eq "SetHost") { + # Setting the remote domain... + + } elsif ($State eq "HostSet") { + # Back to readable to get the ok. + + $Watcher->cb(\&LondReadable); + $Watcher->poll("r"); + } elsif ($State eq "RequestingKey") { # At this time we're requesting the key. # again, this is essentially a no-op. - # we'll write the next chunk until the - # state changes. - - if($Socket->Writable() != 0) { - # Write resulted in an error. - $Watcher->cancel(); - KillSocket($Socket); - return; - - } } elsif ($State eq "ReceivingKey") { # Now we need to wait for the key # to come back from the peer: @@ -955,20 +1038,10 @@ sub LondWritable { $Watcher->poll("r"); } elsif ($State eq "SendingRequest") { + # At this time we are sending a request to the # peer... write the next chunk: - if($Socket->Writable() != 0) { - - if(exists($ActiveTransactions{$Socket})) { - Debug(3, "Lond connection lost, failing transactions"); - FailTransaction($ActiveTransactions{$Socket}); - } - $Watcher->cancel(); - KillSocket($Socket); - return; - - } } elsif ($State eq "ReceivingReply") { # The send has completed. Wait for the @@ -1100,8 +1173,8 @@ The text of the request to send. =cut sub StartRequest { - my $Lond = shift; - my $Request = shift; # This is a LondTransaction. + + my ($Lond, $Request) = @_; Debug(6, "StartRequest: ".$Request->getRequest()); @@ -1157,10 +1230,12 @@ sub QueueTransaction { Debug(5,"Starting additional lond connection"); if(MakeLondConnection() == 0) { EmptyQueue(); # Fail transactions, can't make connection. + CloseAllLondConnections; # Should all be closed but... } } else { ShowStatus(GetServerHost()." >>> DEAD !!!! <<<"); EmptyQueue(); # It's worse than that ... he's dead Jim. + CloseAllLondConnections; # Should all be closed but.. } } } else { # Can start the request: @@ -1203,7 +1278,7 @@ sub ClientRequest { Debug(8,"Data: ".$data." this read: ".$thisread); $data = $data.$thisread; # Append new data. $watcher->data($data); - if($data =~ /(.*\n)/) { # Request entirely read. + if($data =~ /\n$/) { # Request entirely read. if($data eq "close_connection_exit\n") { Log("CRITICAL", "Request Close Connection ... exiting"); @@ -1211,6 +1286,9 @@ sub ClientRequest { exit; } Debug(8, "Complete transaction received: ".$data); + if($LogTransactions) { + Log("SUCCESS", "Transaction: '$data'"); # Transaction has \n. + } my $Transaction = LondTransaction->new($data); $Transaction->SetClient($socket); QueueTransaction($Transaction); @@ -1319,6 +1397,24 @@ sub SetupLoncListener { fd => $socket); } +# +# Toggle transaction logging. +# Implicit inputs: +# LogTransactions +# Implicit Outputs: +# LogTransactions +sub ToggleTransactionLogging { + print STDERR "Toggle transaction logging...\n"; + if(!$LogTransactions) { + $LogTransactions = 1; + } else { + $LogTransactions = 0; + } + + + Log("SUCCESS", "Toggled transaction logging: $LogTransactions \n"); +} + =pod =head2 ChildStatus @@ -1329,6 +1425,7 @@ into the status file. We also use this to reset the retries count in order to allow the client to retry connections with a previously dead server. =cut + sub ChildStatus { my $event = shift; my $watcher = $event->w; @@ -1338,6 +1435,22 @@ sub ChildStatus { my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt"); print $fh $$."\t".$RemoteHost."\t".$Status."\t". $RecentLogEntry."\n"; + # + # Write out information about each of the connections: + # + if ($DebugLevel > 2) { + print $fh "Active connection statuses: \n"; + my $i = 1; + print STDERR "================================= Socket Status Dump:\n"; + foreach my $item (keys %ActiveConnections) { + my $Socket = $ActiveConnections{$item}->data; + my $state = $Socket->GetState(); + print $fh "Connection $i State: $state\n"; + print STDERR "---------------------- Connection $i \n"; + $Socket->Dump(-1); # Ensure it gets dumped.. + $i++; + } + } $ConnectionRetriesLeft = $ConnectionRetries; } @@ -1402,6 +1515,8 @@ sub ChildProcess { Event->signal(signal => "USR1", cb => \&ChildStatus, data => "USR1"); + Event->signal(signal => "USR2", + cb => \&ToggleTransactionLogging); Event->signal(signal => "INT", cb => \&ToggleDebug, data => "INT");