--- loncom/loncnew 2003/10/27 10:09:21 1.30 +++ loncom/loncnew 2005/01/19 21:38:25 1.57.2.1 @@ -2,7 +2,7 @@ # The LearningOnline Network with CAPA # lonc maintains the connections to remote computers # -# $Id: loncnew,v 1.30 2003/10/27 10:09:21 foxr Exp $ +# $Id: loncnew,v 1.57.2.1 2005/01/19 21:38:25 albertel Exp $ # # Copyright Michigan State University Board of Trustees # @@ -35,118 +35,16 @@ # - Add ability to create/negotiate lond connections (done). # - Add general logic for dispatching requests and timeouts. (done). # - Add support for the lonc/lond requests. (done). -# - Add logging/status monitoring. -# - Add Signal handling - HUP restarts. USR1 status report. +# - Add logging/status monitoring. (done) +# - Add Signal handling - HUP restarts. USR1 status report. (done) # - Add Configuration file I/O (done). -# - Add management/status request interface. +# - Add management/status request interface. (done) # - Add deferred request capability. (done) -# - Detect transmission timeouts. +# - Detect transmission timeouts. (done) # -# Change log: -# $Log: loncnew,v $ -# Revision 1.30 2003/10/27 10:09:21 foxr -# Tighten up a few compares to eq and flip a few debug levels around... nothing -# critical -# -# Revision 1.29 2003/10/21 14:24:42 foxr -# Fix little typo that may explain growth of connections -# -# Revision 1.28 2003/10/14 15:36:21 albertel -# - making it easier to run loncnew, -# /etc/init.d/loncontrol startnew -# /etc/init.d/loncontrol restartnew -# will now start loncnew in place of lonc -# -# Revision 1.27 2003/10/07 11:23:03 foxr -# Installed and tested code to process reinit in parent server. -# -# Revision 1.26 2003/09/30 11:11:17 foxr -# Add book-keeping hashes to support the re-init procedure. -# -# Revision 1.25 2003/09/23 11:22:14 foxr -# Tested ability to receive sigusr2 This is now logged and must be -# properly implemented as a re-read of hosts and re-init of appropriate -# children. -# -# Revision 1.24 2003/09/16 09:46:42 foxr -# Added skeletal infrastructure to support SIGUSR2 update hosts request. -# -# Revision 1.23 2003/09/15 09:24:49 foxr -# Add use strict and fix all the fallout from that. -# -# Revision 1.22 2003/09/02 10:34:47 foxr -# - Fix errors in host dead detection logic (too many cases where the -# retries left were not getting incremented or just not checked). -# - Added some additional status to the ps axuww display: -# o Remaining retries on a host. -# o >>> DEAD <<< indicator if I've given up on a host. -# - Tested the SIGHUP will reset the retries remaining count (thanks to -# the above status stuff, and get allow the loncnew to re-try again -# on the host (thanks to the log). -# -# Revision 1.21 2003/08/26 09:19:51 foxr -# How embarrassing... put in the SocketTimeout function in loncnew and forgot -# to actually hook it into the LondTransaction. Added this to MakeLondConnection -# where it belongs... hopefully transactions (not just connection attempts) will -# timeout more speedily than the socket errors will catch it. -# -# Revision 1.20 2003/08/25 18:48:11 albertel -# - fixing a forgotten ; -# -# Revision 1.19 2003/08/19 09:31:46 foxr -# Get socket directory from configuration rather than the old hard coded test -# way that I forgot to un-hard code. -# -# Revision 1.18 2003/08/06 09:52:29 foxr -# Also needed to remember to fail in-flight transactions if their sends fail. -# -# Revision 1.17 2003/08/03 00:44:31 foxr -# 1. Correct handling of connection failure: Assume it means the host is -# unreachable and fail all of the queued transactions. Note that the -# inflight transactions should fail on their own time due either to timeout -# or send/receive failures. -# 2. Correct handling of logs for forced death signals. Pull the signal -# from the event watcher. -# -# Revision 1.16 2003/07/29 02:33:05 foxr -# Add SIGINT processing to child processes to toggle annoying trace mode -# on/off.. will try to use this to isolate the compute boud process issue. -# -# Revision 1.15 2003/07/15 02:07:05 foxr -# Added code for lonc/lond transaction timeouts. Who knows if it works right. -# The intent is for a timeout to fail any transaction in progress and kill -# off the sockt that timed out. -# -# Revision 1.14 2003/07/03 02:10:18 foxr -# Get all of the signals to work correctly. -# -# Revision 1.13 2003/07/02 01:31:55 foxr -# Added kill -HUP logic (restart). -# -# Revision 1.11 2003/06/25 01:54:44 foxr -# Fix more problems with transaction failure. -# -# Revision 1.10 2003/06/24 02:46:04 foxr -# Put a limit on the number of times we'll retry a connection. -# Start getting the signal stuff put in as well...note that need to get signals -# going or else the client will permanently give up on dead servers. -# -# Revision 1.9 2003/06/13 02:38:43 foxr -# Add logging in 'expected format' -# -# Revision 1.8 2003/06/11 02:04:35 foxr -# Support delayed transactions... this is done uniformly by encapsulating -# transactions in an object ... a LondTransaction that is implemented by -# LondTransaction.pm -# -# Revision 1.7 2003/06/03 01:59:39 foxr -# complete coding to support deferred transactions. -# -# use strict; use lib "/home/httpd/lib/perl/"; -use lib "/home/foxr/newloncapa/types"; use Event qw(:DEFAULT ); use POSIX qw(:signal_h); use POSIX; @@ -163,11 +61,7 @@ use LONCAPA::LondConnection; use LONCAPA::LondTransaction; use LONCAPA::Configuration; use LONCAPA::HashIterator; - - -# -# Disable all signals we might receive from outside for now. -# +use Fcntl qw(:flock); # Read the httpd configuration file to get perl variables @@ -189,7 +83,9 @@ my $ClientConnection = 0; # Uniquifier f my $DebugLevel = 0; my $NextDebugLevel= 2; # So Sigint can toggle this. -my $IdleTimeout= 3600; # Wait an hour before pruning connections. +my $IdleTimeout= 600; # Wait 10 minutes before pruning connections. + +my $LogTransactions = 0; # When True, all transactions/replies get logged. # # The variables below are only used by the child processes. @@ -207,6 +103,11 @@ my $Status = ""; # Current stat my $RecentLogEntry = ""; my $ConnectionRetries=2; # Number of connection retries allowed. my $ConnectionRetriesLeft=2; # Number of connection retries remaining. +my $LondVersion = "unknown"; # Version of lond we talk with. +my $KeyMode = ""; # e.g. ssl, local, insecure from last connect. +my $LondConnecting = 0; # True when a connection is being built. + +my $DieWhenIdle = 0; # When true children die when trimmed -> 0. # # The hash below gives the HTML format for log messages @@ -214,13 +115,27 @@ my $ConnectionRetriesLeft=2; # Number of # my %LogFormats; -$LogFormats{"CRITICAL"} = "CRITICAL: %s"; -$LogFormats{"SUCCESS"} = "SUCCESS: %s"; -$LogFormats{"INFO"} = "INFO: %s"; -$LogFormats{"WARNING"} = "WARNING: %s"; +$LogFormats{"CRITICAL"} = "CRITICAL: %s"; +$LogFormats{"SUCCESS"} = "SUCCESS: %s"; +$LogFormats{"INFO"} = "INFO: %s"; +$LogFormats{"WARNING"} = "WARNING: %s"; $LogFormats{"DEFAULT"} = " %s "; +# UpdateStatus; +# Update the idle status display to show how many connections +# are left, retries and other stuff. +# +sub UpdateStatus { + if ($ConnectionRetriesLeft > 0) { + ShowStatus(GetServerHost()." Connection count: ".$ConnectionCount + ." Retries remaining: ".$ConnectionRetriesLeft + ." ($KeyMode)"); + } else { + ShowStatus(GetServerHost()." >> DEAD <<"); + } +} + =pod @@ -260,9 +175,9 @@ host and the time will be formatted into =cut sub Log { - my $severity = shift; - my $message = shift; - + + my ($severity, $message) = @_; + if(!$LogFormats{$severity}) { $severity = "DEFAULT"; } @@ -297,8 +212,10 @@ Returns the name of the host that a sock =cut sub GetPeername { - my $connection = shift; - my $AdrFamily = shift; + + + my ($connection, $AdrFamily) = @_; + my $peer = $connection->peername(); my $peerport; my $peerip; @@ -312,7 +229,6 @@ sub GetPeername { return $peerfile; } } -#----------------------------- Timer management ------------------------ =pod =head2 Debug @@ -322,18 +238,20 @@ Invoked to issue a debug message. =cut sub Debug { - my $level = shift; - my $message = shift; + + my ($level, $message) = @_; + if ($level <= $DebugLevel) { Log("INFO", "-Debug- $message host = $RemoteHost"); } } sub SocketDump { - my $level = shift; - my $socket= shift; + + my ($level, $socket) = @_; + if($level <= $DebugLevel) { - $socket->Dump(); + $socket->Dump(-1); # Ensure it will get dumped. } } @@ -364,11 +282,22 @@ sub ShowStatus { =cut sub SocketTimeout { my $Socket = shift; - + Log("WARNING", "A socket timeout was detected"); + Debug(5, " SocketTimeout called: "); + $Socket->Dump(0); + if(exists($ActiveTransactions{$Socket})) { + FailTransaction($ActiveTransactions{$Socket}); + } KillSocket($Socket); # A transaction timeout also counts as # a connection failure: $ConnectionRetriesLeft--; + if($ConnectionRetriesLeft <= 0) { + Log("CRITICAL", "Host marked DEAD: ".GetServerHost()); + $LondConnecting = 0; + } + } +#----------------------------- Timer management ------------------------ =pod @@ -380,13 +309,12 @@ Invoked each timer tick. sub Tick { + my ($Event) = @_; + my $clock_watcher = $Event->w; + my $client; - if($ConnectionRetriesLeft > 0) { - ShowStatus(GetServerHost()." Connection count: ".$ConnectionCount - ." Retries remaining: ".$ConnectionRetriesLeft); - } else { - ShowStatus(GetServerHost()." >> DEAD <<"); - } + UpdateStatus(); + # Is it time to prune connection count: @@ -396,6 +324,22 @@ sub Tick { if($IdleSeconds > $IdleTimeout) { # Prune a connection... my $Socket = $IdleConnections->pop(); KillSocket($Socket); + $IdleSeconds = 0; # Otherwise all connections get trimmed to fast. + UpdateStatus(); + if(($ConnectionCount == 0) && $DieWhenIdle) { + # + # Create a lock file since there will be a time window + # between our exit and the parent's picking up the listen + # during which no listens will be done on the + # lonnet client socket. + # + my $lock_file = GetLoncSocketPath().".lock"; + open(LOCK,">$lock_file"); + print LOCK "Contents not important"; + close(LOCK); + + exit(0); + } } } else { $IdleSeconds = 0; # Reset idle count if not idle. @@ -403,35 +347,44 @@ sub Tick { # # For each inflight transaction, tick down its timeout counter. # - foreach my $item (keys %ActiveTransactions) { - my $Socket = $ActiveTransactions{$item}->getServer(); - $Socket->Tick(); + + foreach my $item (keys %ActiveConnections) { + my $State = $ActiveConnections{$item}->data->GetState(); + if ($State ne 'Idle') { + Debug(5,"Ticking Socket $State $item"); + $ActiveConnections{$item}->data->Tick(); + } } # Do we have work in the queue, but no connections to service them? # If so, try to make some new connections to get things going again. # - + # Note this code is dead now... + # my $Requests = $WorkQueue->Count(); - if (($ConnectionCount == 0) && ($Requests > 0)) { + if (($ConnectionCount == 0) && ($Requests > 0) && (!$LondConnecting)) { if ($ConnectionRetriesLeft > 0) { - my $Connections = ($Requests <= $MaxConnectionCount) ? - $Requests : $MaxConnectionCount; - Debug(5,"Work but no connections, start ".$Connections." of them"); - my $successCount = 0; - for (my $i =0; $i < $Connections; $i++) { - $successCount += MakeLondConnection(); - } - if($successCount == 0) { # All connections failed: + Debug(5,"Work but no connections, Make a new one"); + my $success; + $success = &MakeLondConnection; + if($success == 0) { # All connections failed: Debug(5,"Work in queue failed to make any connectiouns\n"); EmptyQueue(); # Fail pending transactions with con_lost. + CloseAllLondConnections(); # Should all be closed but.... } } else { + $LondConnecting = 0; ShowStatus(GetServerHost()." >>> DEAD!!! <<<"); Debug(5,"Work in queue, but gave up on connections..flushing\n"); EmptyQueue(); # Connections can't be established. + CloseAllLondConnections(); # Should all already be closed but... } } + if ($ConnectionCount == 0) { + $KeyMode = ""; + $clock_watcher->cancel(); + } + &UpdateStatus(); } =pod @@ -452,7 +405,7 @@ Trigger disconnections of idle sockets. sub SetupTimer { Debug(6, "SetupTimer"); - Event->timer(interval => 1, debug => 1, cb => \&Tick ); + Event->timer(interval => 1, cb => \&Tick ); } =pod @@ -472,6 +425,7 @@ long enough, it will be shut down and re sub ServerToIdle { my $Socket = shift; # Get the socket. + $KeyMode = $Socket->{AuthenticationMode}; delete($ActiveTransactions{$Socket}); # Server has no transaction &Debug(5, "Server to idle"); @@ -551,7 +505,7 @@ sub ClientWritable { } else { # Partial string sent. $Watcher->data(substr($Data, $result)); if($result == 0) { # client hung up on us!! - Log("INFO", "lonc pipe client hung up on us!"); + # Log("INFO", "lonc pipe client hung up on us!"); $Watcher->cancel; $Socket->shutdown(2); $Socket->close(); @@ -604,11 +558,14 @@ The transaction that is being completed. sub CompleteTransaction { &Debug(5,"Complete transaction"); - my $Socket = shift; - my $Transaction = shift; + + my ($Socket, $Transaction) = @_; if (!$Transaction->isDeferred()) { # Normal transaction my $data = $Socket->GetReply(); # Data to send. + if($LogTransactions) { + Log("SUCCESS", "Reply from lond: '$data'"); + } StartClientReply($Transaction, $data); } else { # Delete deferred transaction file. Log("SUCCESS", "A delayed transaction was completed"); @@ -616,7 +573,9 @@ sub CompleteTransaction { unlink $Transaction->getFile(); } } + =pod + =head1 StartClientReply Initiates a reply to a client where the reply data is a parameter. @@ -632,10 +591,10 @@ sub CompleteTransaction { The data to send to apached client. =cut + sub StartClientReply { - my $Transaction = shift; - my $data = shift; + my ($Transaction, $data) = @_; my $Client = $Transaction->getClient(); @@ -649,7 +608,9 @@ sub StartClientReply { cb => \&ClientWritable, data => $data); } + =pod + =head2 FailTransaction Finishes a transaction with failure because the associated lond socket @@ -659,8 +620,7 @@ sub StartClientReply { - The transaction is 'live' in which case we initiate the sending of "con_lost" to the client. -Deleting the transaction means killing it from the -%ActiveTransactions hash. +Deleting the transaction means killing it from the %ActiveTransactions hash. Parameters: @@ -668,20 +628,24 @@ Parameters: The LondTransaction we are failing. + =cut sub FailTransaction { my $transaction = shift; - Log("WARNING", "Failing transaction ".$transaction->getRequest()); + + # If the socket is dead, that's already logged. + + if ($ConnectionRetriesLeft > 0) { + Log("WARNING", "Failing transaction " + .$transaction->getRequest()); + } Debug(1, "Failing transaction: ".$transaction->getRequest()); if (!$transaction->isDeferred()) { # If the transaction is deferred we'll get to it. my $client = $transaction->getClient(); Debug(1," Replying con_lost to ".$transaction->getRequest()); StartClientReply($transaction, "con_lost\n"); } - if($ConnectionRetriesLeft <= 0) { - Log("CRITICAL", "Host marked dead: ".GetServerHost()); - } } @@ -709,7 +673,10 @@ Close all connections open on lond prior =cut sub CloseAllLondConnections { foreach my $Socket (keys %ActiveConnections) { - KillSocket($Socket); + if(exists($ActiveTransactions{$Socket})) { + FailTransaction($ActiveTransactions{$Socket}); + } + KillSocket($Socket); } } =cut @@ -753,14 +720,15 @@ sub KillSocket { } if(exists($ActiveConnections{$Socket})) { delete($ActiveConnections{$Socket}); + $ConnectionCount--; + if ($ConnectionCount < 0) { $ConnectionCount = 0; } } - $ConnectionCount--; - # If the connection count has gone to zero and there is work in the # work queue, the work all gets failed with con_lost. # if($ConnectionCount == 0) { EmptyQueue(); + CloseAllLondConnections; # Should all already be closed but... } } @@ -786,6 +754,17 @@ The connection must echo the challenge b The challenge has been replied to. The we are receiveing the 'ok' from the partner. +=head3 State=ReadingVersionString + +We have requested the lond version and are reading the +version back. Upon completion, we'll store the version away +for future use(?). + +=head3 State=HostSet + +We have selected the domain name of our peer (multhomed hosts) +and are getting the reply (presumably ok) back. + =head3 State=RequestingKey The ok has been received and we need to send the request for @@ -840,13 +819,18 @@ sub LondReadable { &Debug(2, "Socket->Readable returned: $status"); if($status != 0) { - # bad return from socket read. Currently this means that + # bad return from socket read. Currently this means that # The socket has become disconnected. We fail the transaction. Log("WARNING", "Lond connection lost."); if(exists($ActiveTransactions{$Socket})) { FailTransaction($ActiveTransactions{$Socket}); + } else { + # Socket is connecting and failed... need to mark + # no longer connecting. + + $LondConnecting = 0; } $Watcher->cancel(); KillSocket($Socket); @@ -858,19 +842,34 @@ sub LondReadable { $State = $Socket->GetState(); # Update in case of transition. &Debug(6, "After read, state is ".$State); - if($State eq "Initialized") { + if($State eq "Initialized") { } elsif ($State eq "ChallengeReceived") { # The challenge must be echoed back; The state machine # in the connection takes care of setting that up. Just # need to transition to writable: - + $Watcher->cb(\&LondWritable); $Watcher->poll("w"); } elsif ($State eq "ChallengeReplied") { + } elsif ($State eq "RequestingVersion") { + # Need to ask for the version... that is writiability: + + $Watcher->cb(\&LondWritable); + $Watcher->poll("w"); + + } elsif ($State eq "ReadingVersionString") { + # Read the rest of the version string... + } elsif ($State eq "SetHost") { + # Need to request the actual domain get set... + + $Watcher->cb(\&LondWritable); + $Watcher->poll("w"); + } elsif ($State eq "HostSet") { + # Reading the 'ok' from the peer. } elsif ($State eq "RequestingKey") { # The ok was received. Now we need to request the key @@ -882,6 +881,14 @@ sub LondReadable { } elsif ($State eq "ReceivingKey") { } elsif ($State eq "Idle") { + + # This is as good a spot as any to get the peer version + # string: + + if($LondVersion eq "unknown") { + $LondVersion = $Socket->PeerVersion(); + Log("INFO", "Connected to lond version: $LondVersion"); + } # If necessary, complete a transaction and then go into the # idle queue. # Note that a trasition to idle indicates a live lond @@ -898,6 +905,10 @@ sub LondReadable { .$RemoteHost." now ready for action"); } ServerToIdle($Socket); # Next work unit or idle. + + # + $LondConnecting = 0; # Best spot I can think of for this. + # } elsif ($State eq "SendingRequest") { # We need to be writable for this and probably don't belong @@ -911,7 +922,7 @@ sub LondReadable { } else { - # Invalid state. + # Invalid state. Debug(4, "Invalid state in LondReadable"); } } @@ -993,21 +1004,40 @@ sub LondWritable { SocketDump(6,$Socket); - if ($State eq "Connected") { - - if ($Socket->Writable() != 0) { - # The write resulted in an error. - # We'll treat this as if the socket got disconnected: - Log("WARNING", "Connection to ".$RemoteHost. - " has been disconnected"); + # If the socket is writable, we must always write. + # Only by writing will we undergo state transitions. + # Old logic wrote in state specific code below, however + # That forces us at least through another invocation of + # this function after writability is possible again. + # This logic also factors out common code for handling + # write failures... in all cases, write failures + # Kill the socket. + # This logic makes the branches of the >big< if below + # so that the writing states are actually NO-OPs. + + if ($Socket->Writable() != 0) { + # The write resulted in an error. + # We'll treat this as if the socket got disconnected: + Log("WARNING", "Connection to ".$RemoteHost. + " has been disconnected"); + if(exists($ActiveTransactions{$Socket})) { FailTransaction($ActiveTransactions{$Socket}); - $Watcher->cancel(); - KillSocket($Socket); - return; + } else { + # In the process of conneting, so need to turn that off. + + $LondConnecting = 0; } - # "init" is being sent... + $Watcher->cancel(); + KillSocket($Socket); + return; + } - + + + if ($State eq "Connected") { + + # "init" is being sent... + } elsif ($State eq "Initialized") { # Now that init was sent, we switch @@ -1015,40 +1045,43 @@ sub LondWritable { $Watcher->cb(\&LondReadable); $Watcher->poll("r"); - + } elsif ($State eq "ChallengeReceived") { # We received the challenge, now we # are echoing it back. This is a no-op, # we're waiting for the state to change - if($Socket->Writable() != 0) { - - $Watcher->cancel(); - KillSocket($Socket); - return; - } - } elsif ($State eq "ChallengeReplied") { # The echo was sent back, so we switch # to watching readability. $Watcher->cb(\&LondReadable); $Watcher->poll("r"); + } elsif ($State eq "RequestingVersion") { + # Sending the peer a version request... + + } elsif ($State eq "ReadingVersionString") { + # Transition to read since we have sent the + # version command and now just need to read the + # version string from the peer: + + $Watcher->cb(\&LondReadable); + $Watcher->poll("r"); + + } elsif ($State eq "SetHost") { + # Setting the remote domain... + + } elsif ($State eq "HostSet") { + # Back to readable to get the ok. + + $Watcher->cb(\&LondReadable); + $Watcher->poll("r"); + } elsif ($State eq "RequestingKey") { # At this time we're requesting the key. # again, this is essentially a no-op. - # we'll write the next chunk until the - # state changes. - - if($Socket->Writable() != 0) { - # Write resulted in an error. - $Watcher->cancel(); - KillSocket($Socket); - return; - - } } elsif ($State eq "ReceivingKey") { # Now we need to wait for the key # to come back from the peer: @@ -1057,20 +1090,10 @@ sub LondWritable { $Watcher->poll("r"); } elsif ($State eq "SendingRequest") { + # At this time we are sending a request to the # peer... write the next chunk: - if($Socket->Writable() != 0) { - - if(exists($ActiveTransactions{$Socket})) { - Debug(3, "Lond connection lost, failing transactions"); - FailTransaction($ActiveTransactions{$Socket}); - } - $Watcher->cancel(); - KillSocket($Socket); - return; - - } } elsif ($State eq "ReceivingReply") { # The send has completed. Wait for the @@ -1163,7 +1186,9 @@ sub MakeLondConnection { data => $Connection, desc => 'Connection to lond server'); $ActiveConnections{$Connection} = $event; - + if ($ConnectionCount == 0) { + &SetupTimer; # Need to handle timeouts with connections... + } $ConnectionCount++; Debug(4, "Connection count = ".$ConnectionCount); if($ConnectionCount == 1) { # First Connection: @@ -1171,6 +1196,7 @@ sub MakeLondConnection { } Log("SUCESS", "Created connection ".$ConnectionCount ." to host ".GetServerHost()); + $LondConnecting = 1; # Connection in progress. return 1; # Return success. } @@ -1202,8 +1228,8 @@ The text of the request to send. =cut sub StartRequest { - my $Lond = shift; - my $Request = shift; # This is a LondTransaction. + + my ($Lond, $Request) = @_; Debug(6, "StartRequest: ".$Request->getRequest()); @@ -1254,15 +1280,20 @@ sub QueueTransaction { if(!defined $LondSocket) { # Need to queue request. Debug(5,"Must queue..."); $WorkQueue->enqueue($requestData); - if($ConnectionCount < $MaxConnectionCount) { + Debug(5, "Queue Transaction startnew $ConnectionCount $LondConnecting"); + if(($ConnectionCount < $MaxConnectionCount) && (! $LondConnecting)) { + if($ConnectionRetriesLeft > 0) { Debug(5,"Starting additional lond connection"); - if(MakeLondConnection() == 0) { + if(&MakeLondConnection() == 0) { EmptyQueue(); # Fail transactions, can't make connection. + CloseAllLondConnections; # Should all be closed but... } } else { ShowStatus(GetServerHost()." >>> DEAD !!!! <<<"); + $LondConnecting = 0; EmptyQueue(); # It's worse than that ... he's dead Jim. + CloseAllLondConnections; # Should all be closed but.. } } } else { # Can start the request: @@ -1305,7 +1336,7 @@ sub ClientRequest { Debug(8,"Data: ".$data." this read: ".$thisread); $data = $data.$thisread; # Append new data. $watcher->data($data); - if($data =~ /(.*\n)/) { # Request entirely read. + if($data =~ /\n$/) { # Request entirely read. if($data eq "close_connection_exit\n") { Log("CRITICAL", "Request Close Connection ... exiting"); @@ -1313,6 +1344,9 @@ sub ClientRequest { exit; } Debug(8, "Complete transaction received: ".$data); + if($LogTransactions) { + Log("SUCCESS", "Transaction: '$data'"); # Transaction has \n. + } my $Transaction = LondTransaction->new($data); $Transaction->SetClient($socket); QueueTransaction($Transaction); @@ -1411,7 +1445,7 @@ sub SetupLoncListener { my $SocketName = GetLoncSocketPath(); unlink($SocketName); unless ($socket =IO::Socket::UNIX->new(Local => $SocketName, - Listen => 10, + Listen => 250, Type => SOCK_STREAM)) { die "Failed to create a lonc listner socket"; } @@ -1421,6 +1455,24 @@ sub SetupLoncListener { fd => $socket); } +# +# Toggle transaction logging. +# Implicit inputs: +# LogTransactions +# Implicit Outputs: +# LogTransactions +sub ToggleTransactionLogging { + print STDERR "Toggle transaction logging...\n"; + if(!$LogTransactions) { + $LogTransactions = 1; + } else { + $LogTransactions = 0; + } + + + Log("SUCCESS", "Toggled transaction logging: $LogTransactions \n"); +} + =pod =head2 ChildStatus @@ -1431,15 +1483,36 @@ into the status file. We also use this to reset the retries count in order to allow the client to retry connections with a previously dead server. =cut + sub ChildStatus { my $event = shift; my $watcher = $event->w; Debug(2, "Reporting child status because : ".$watcher->data); my $docdir = $perlvar{'lonDocRoot'}; - my $fh = IO::File->new(">>$docdir/lon-status/loncstatus.txt"); - print $fh $$."\t".$RemoteHost."\t".$Status."\t". + + open(LOG,">>$docdir/lon-status/loncstatus.txt"); + flock(LOG,LOCK_EX); + print LOG $$."\t".$RemoteHost."\t".$Status."\t". $RecentLogEntry."\n"; + # + # Write out information about each of the connections: + # + if ($DebugLevel > 2) { + print LOG "Active connection statuses: \n"; + my $i = 1; + print STDERR "================================= Socket Status Dump:\n"; + foreach my $item (keys %ActiveConnections) { + my $Socket = $ActiveConnections{$item}->data; + my $state = $Socket->GetState(); + print LOG "Connection $i State: $state\n"; + print STDERR "---------------------- Connection $i \n"; + $Socket->Dump(-1); # Ensure it gets dumped.. + $i++; + } + } + flock(LOG,LOCK_UN); + close(LOG); $ConnectionRetriesLeft = $ConnectionRetries; } @@ -1504,11 +1577,12 @@ sub ChildProcess { Event->signal(signal => "USR1", cb => \&ChildStatus, data => "USR1"); + Event->signal(signal => "USR2", + cb => \&ToggleTransactionLogging); Event->signal(signal => "INT", cb => \&ToggleDebug, data => "INT"); - SetupTimer(); SetupLoncListener(); @@ -1531,9 +1605,10 @@ sub ChildProcess { # Create a new child for host passed in: sub CreateChild { + my $host = shift; + my $sigset = POSIX::SigSet->new(SIGINT); sigprocmask(SIG_BLOCK, $sigset); - my $host = shift; $RemoteHost = $host; Log("CRITICAL", "Forking server for ".$host); my $pid = fork; @@ -1598,6 +1673,7 @@ ShowStatus("Forking node servers"); Log("CRITICAL", "--------------- Starting children ---------------"); +LondConnection::ReadConfig; # Read standard config files. my $HostIterator = LondConnection::GetHostIterator; while (! $HostIterator->end()) { @@ -1659,7 +1735,6 @@ sub CheckKids { foreach my $pid (keys %ChildHash) { Debug(2, "Sending USR1 -> $pid"); kill 'USR1' => $pid; # Tell Child to report status. - sleep 1; # Wait so file doesn't intermix. } } @@ -1803,17 +1878,33 @@ sub KillThemAll { local($SIG{CHLD}) = 'IGNORE'; # Our children >will< die. foreach my $pid (keys %ChildHash) { my $serving = $ChildHash{$pid}; - Debug(2, "Killing lonc for $serving pid = $pid"); - ShowStatus("Killing lonc for $serving pid = $pid"); - Log("CRITICAL", "Killing lonc for $serving pid = $pid"); + ShowStatus("Nicely Killing lonc for $serving pid = $pid"); + Log("CRITICAL", "Nicely Killing lonc for $serving pid = $pid"); kill 'QUIT' => $pid; - delete($ChildHash{$pid}); } - my $execdir = $perlvar{'lonDaemons'}; - unlink("$execdir/logs/lonc.pid"); + } + +# +# Kill all children via KILL. Just in case the +# first shot didn't get them. + +sub really_kill_them_all_dammit +{ + Debug(2, "Kill them all Dammit"); + local($SIG{CHLD} = 'IGNORE'); # In case some purist reenabled them. + foreach my $pid (keys %ChildHash) { + my $serving = $ChildHash{$pid}; + &ShowStatus("Nastily killing lonc for $serving pid = $pid"); + Log("CRITICAL", "Nastily killing lonc for $serving pid = $pid"); + kill 'KILL' => $pid; + delete($ChildHash{$pid}); + my $execdir = $perlvar{'lonDaemons'}; + unlink("$execdir/logs/lonc.pid"); + } +} =pod =head1 Terminate @@ -1823,7 +1914,15 @@ Terminate the system. =cut sub Terminate { - KillThemAll; + &Log("CRITICAL", "Asked to kill children.. first be nice..."); + &KillThemAll; + # + # By now they really should all be dead.. but just in case + # send them all SIGKILL's after a bit of waiting: + + sleep(4); + &Log("CRITICAL", "Now kill children nasty"); + &really_kill_them_all_dammit; Log("CRITICAL","Master process exiting"); exit 0;