[BACK]Return to lond CVS log [TXT] [DIR] Up to [LON-CAPA] / loncom

Diff for /loncom/lond between versions 1.394.2.1 and 1.424

version 1.394.2.1, 2008/05/30 21:34:27 version 1.424, 2009/08/22 19:52:08
Line 142  my @adderrors    = ("ok", Line 142  my @adderrors    = ("ok",
     "lcuseradd Password mismatch");      "lcuseradd Password mismatch");
   
   
   # This array are the errors from lcinstallfile:
   
   my @installerrors = ("ok",
        "Initial user id of client not that of www",
        "Usage error, not enough command line arguments",
        "Source file name does not exist",
        "Destination file name does not exist",
        "Some file operation failed",
        "Invalid table filename."
        );
   
 #  #
 #   Statistics that are maintained and dislayed in the status line.  #   Statistics that are maintained and dislayed in the status line.
Line 398  sub isClient { Line 408  sub isClient {
 #  #
 sub ReadManagerTable {  sub ReadManagerTable {
   
       &Debug("Reading manager table");
     #   Clean out the old table first..      #   Clean out the old table first..
   
    foreach my $key (keys %managers) {     foreach my $key (keys %managers) {
Line 520  sub AdjustHostContents { Line 531  sub AdjustHostContents {
 }  }
 #  #
 #   InstallFile: Called to install an administrative file:  #   InstallFile: Called to install an administrative file:
 #       - The file is created with <name>.tmp  #       - The file is created int a temp directory called <name>.tmp
 #       - The <name>.tmp file is then mv'd to <name>  #       - lcinstall file is called to install the file.
 #   This lugubrious procedure is done to ensure that we are never without  #         since the web app has no direct write access to the table directory
 #   a valid, even if dated, version of the file regardless of who crashes  
 #   and when the crash occurs.  
 #  #
 #  Parameters:  #  Parameters:
 #       Name of the file  #       Name of the file
Line 532  sub AdjustHostContents { Line 541  sub AdjustHostContents {
 #  Return:  #  Return:
 #      nonzero - success.  #      nonzero - success.
 #      0       - failure and $! has an errno.  #      0       - failure and $! has an errno.
   # Assumptions:
   #    File installtion is a relatively infrequent
 #  #
 sub InstallFile {  sub InstallFile {
   
     my ($Filename, $Contents) = @_;      my ($Filename, $Contents) = @_;
     my $TempFile = $Filename.".tmp";  #     my $TempFile = $Filename.".tmp";
       my $exedir = $perlvar{'lonDaemons'};
       my $tmpdir = $exedir.'/tmp/';
       my $TempFile = $tmpdir."TempTableFile.tmp";
   
     #  Open the file for write:      #  Open the file for write:
   
Line 550  sub InstallFile { Line 564  sub InstallFile {
     print $fh ($Contents);       print $fh ($Contents); 
     $fh->close; # In case we ever have a filesystem w. locking      $fh->close; # In case we ever have a filesystem w. locking
   
     chmod(0660, $TempFile);      chmod(0664, $TempFile); # Everyone can write it.
   
     # Now we can move install the file in position.      # Use lcinstall file to put the file in the table directory...
       
     move($TempFile, $Filename);      &Debug("Opening pipe to $exedir/lcinstallfile $TempFile $Filename");
       my $pf = IO::File->new("| $exedir/lcinstallfile   $TempFile $Filename > $exedir/logs/lcinstallfile.log");
       close $pf;
       my $err = $?;
       &Debug("Status is $err");
       if ($err != 0) {
    my $msg = $err;
    if ($err < @installerrors) {
       $msg = $installerrors[$err];
    }
    &logthis("Install failed for table file $Filename : $msg");
    return 0;
       }
   
       # Remove the temp file:
   
       unlink($TempFile);
   
     return 1;      return 1;
 }  }
Line 562  sub InstallFile { Line 592  sub InstallFile {
   
 #  #
 #   ConfigFileFromSelector: converts a configuration file selector  #   ConfigFileFromSelector: converts a configuration file selector
 #                 (one of host or domain at this point) into a   #                 into a configuration file pathname.
 #                 configuration file pathname.  #                 It's probably no longer necessary to preserve
   #                 special handling of hosts or domain as those
   #                 files have been superceded by dns_hosts, dns_domain.
   #                 The default action is just to prepend the directory
   #                 and append .tab
   #
 #  #
 #  Parameters:  #  Parameters:
 #      selector  - Configuration file selector.  #      selector  - Configuration file selector.
Line 580  sub ConfigFileFromSelector { Line 615  sub ConfigFileFromSelector {
     } elsif ($selector eq "domain") {      } elsif ($selector eq "domain") {
  $tablefile = $tabledir."domain.tab";   $tablefile = $tabledir."domain.tab";
     } else {      } else {
  return undef;   $tablefile =  $tabledir.$selector.'.tab';
     }      }
     return $tablefile;      return $tablefile;
   
Line 603  sub ConfigFileFromSelector { Line 638  sub ConfigFileFromSelector {
 sub PushFile {  sub PushFile {
     my $request = shift;          my $request = shift;    
     my ($command, $filename, $contents) = split(":", $request, 3);      my ($command, $filename, $contents) = split(":", $request, 3);
       &Debug("PushFile");
           
     #  At this point in time, pushes for only the following tables are      #  At this point in time, pushes for only the following tables are
     #  supported:      #  supported:
Line 619  sub PushFile { Line 655  sub PushFile {
     if(! (defined $tablefile)) {      if(! (defined $tablefile)) {
  return "refused";   return "refused";
     }      }
     #  
     # >copy< the old table to the backup table  
     #        don't rename in case system crashes/reboots etc. in the time  
     #        window between a rename and write.  
     #  
     my $backupfile = $tablefile;  
     $backupfile    =~ s/\.tab$/.old/;  
     if(!CopyFile($tablefile, $backupfile)) {  
  &logthis('<font color="green"> CopyFile from '.$tablefile." to ".$backupfile." failed </font>");  
  return "error:$!";  
     }  
     &logthis('<font color="green"> Pushfile: backed up '  
     .$tablefile." to $backupfile</font>");  
       
     #  If the file being pushed is the host file, we adjust the entry for ourself so that the      #  If the file being pushed is the host file, we adjust the entry for ourself so that the
     #  IP will be our current IP as looked up in dns.  Note this is only 99% good as it's possible      #  IP will be our current IP as looked up in dns.  Note this is only 99% good as it's possible
     #  to conceive of conditions where we don't have a DNS entry locally.  This is possible in a       #  to conceive of conditions where we don't have a DNS entry locally.  This is possible in a 
Line 645  sub PushFile { Line 668  sub PushFile {
   
     #  Install the new file:      #  Install the new file:
   
       &logthis("Installing new $tablefile contents:\n$contents");
     if(!InstallFile($tablefile, $contents)) {      if(!InstallFile($tablefile, $contents)) {
  &logthis('<font color="red"> Pushfile: unable to install '   &logthis('<font color="red"> Pushfile: unable to install '
  .$tablefile." $! </font>");   .$tablefile." $! </font>");
Line 1198  sub user_authorization_type { Line 1222  sub user_authorization_type {
 #    a reply is written to the client.  #    a reply is written to the client.
 sub push_file_handler {  sub push_file_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
       &Debug("In push file handler");
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
     # At this time we only know that the IP of our partner is a valid manager      # At this time we only know that the IP of our partner is a valid manager
Line 1206  sub push_file_handler { Line 1230  sub push_file_handler {
     # spoofing).      # spoofing).
   
     my $cert = &GetCertificate($userinput);      my $cert = &GetCertificate($userinput);
     if(&ValidManager($cert)) {       if(&ValidManager($cert)) {
    &Debug("Valid manager: $client");
   
  # Now presumably we have the bona fides of both the peer host and the   # Now presumably we have the bona fides of both the peer host and the
  # process making the request.   # process making the request.
Line 1215  sub push_file_handler { Line 1240  sub push_file_handler {
  &Reply($client, \$reply, $userinput);   &Reply($client, \$reply, $userinput);
   
     } else {      } else {
    &logthis("push_file_handler $client is not valid");
  &Failure( $client, "refused\n", $userinput);   &Failure( $client, "refused\n", $userinput);
     }       } 
     return 1;      return 1;
 }  }
 &register_handler("pushfile", \&push_file_handler, 1, 0, 1);  &register_handler("pushfile", \&push_file_handler, 1, 0, 1);
   
   # The du_handler routine should be considered obsolete and is retained
   # for communication with legacy servers.  Please see the du2_handler.
 #  #
 #   du  - list the disk usuage of a directory recursively.   #   du  - list the disk usage of a directory recursively. 
 #      #    
 #   note: stolen code from the ls file handler  #   note: stolen code from the ls file handler
 #   under construction by Rick Banghart   #   under construction by Rick Banghart 
Line 1272  sub du_handler { Line 1300  sub du_handler {
 }  }
 &register_handler("du", \&du_handler, 0, 1, 0);  &register_handler("du", \&du_handler, 0, 1, 0);
   
   # Please also see the du_handler, which is obsoleted by du2. 
   # du2_handler differs from du_handler in that required path to directory
   # provided by &propath() is prepended in the handler instead of on the 
   # client side.
 #  #
 # The ls_handler routine should be considered obosolete and is retained  #   du2  - list the disk usage of a directory recursively.
 # for communication with legacy servers.  Please see the ls2_handler.  #
   # Parameters:
   #    $cmd        - The command that dispatched us (du).
   #    $tail       - The tail of the request that invoked us.
   #                  $tail is a : separated list of the following:
   #                   - $ududir - directory path to list (before prepending)
   #                   - $getpropath = 1 if &propath() should prepend
   #                   - $uname - username to use for &propath or user dir
   #                   - $udom - domain to use for &propath or user dir
   #                   All are escaped.
   #    $client     - Socket open on the client.
   # Returns:
   #     1 - indicating that the daemon should not disconnect.
   # Side Effects:
   #   The reply is written to $client.
   #
   
   sub du2_handler {
       my ($cmd, $tail, $client) = @_;
       my ($ududir,$getpropath,$uname,$udom) = map { &unescape($_) } (split(/:/, $tail));
       my $userinput = "$cmd:$tail";
       if (($ududir=~/\.\./) || (($ududir!~m|^/home/httpd/|) && (!$getpropath))) {
           &Failure($client,"refused\n","$cmd:$tail");
           return 1;
       }
       if ($getpropath) {
           if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) {
               $ududir = &propath($udom,$uname).'/'.$ududir;
           } else {
               &Failure($client,"refused\n","$cmd:$tail");
               return 1;
           }
       }
       #  Since $ududir could have some nasties in it,
       #  we will require that ududir is a valid
       #  directory.  Just in case someone tries to
       #  slip us a  line like .;(cd /home/httpd rm -rf*)
       #  etc.
       #
       if (-d $ududir) {
           my $total_size=0;
           my $code=sub {
               if ($_=~/\.\d+\./) { return;}
               if ($_=~/\.meta$/) { return;}
               if (-d $_)         { return;}
               $total_size+=(stat($_))[7];
           };
           chdir($ududir);
           find($code,$ududir);
           $total_size=int($total_size/1024);
           &Reply($client,\$total_size,"$cmd:$ududir");
       } else {
           &Failure($client, "bad_directory:$ududir\n","$cmd:$tail");
       }
       return 1;
   }
   &register_handler("du2", \&du2_handler, 0, 1, 0);
   
   #
   # The ls_handler routine should be considered obsolete and is retained
   # for communication with legacy servers.  Please see the ls3_handler.
 #  #
 #   ls  - list the contents of a directory.  For each file in the  #   ls  - list the contents of a directory.  For each file in the
 #    selected directory the filename followed by the full output of  #    selected directory the filename followed by the full output of
Line 1340  sub ls_handler { Line 1432  sub ls_handler {
 }  }
 &register_handler("ls", \&ls_handler, 0, 1, 0);  &register_handler("ls", \&ls_handler, 0, 1, 0);
   
 #  # The ls2_handler routine should be considered obsolete and is retained
 # Please also see the ls_handler, which this routine obosolets.  # for communication with legacy servers.  Please see the ls3_handler.
   # Please also see the ls_handler, which was itself obsoleted by ls2.
 # ls2_handler differs from ls_handler in that it escapes its return   # ls2_handler differs from ls_handler in that it escapes its return 
 # values before concatenating them together with ':'s.  # values before concatenating them together with ':'s.
 #  #
Line 1406  sub ls2_handler { Line 1499  sub ls2_handler {
    return 1;     return 1;
 }  }
 &register_handler("ls2", \&ls2_handler, 0, 1, 0);  &register_handler("ls2", \&ls2_handler, 0, 1, 0);
   #
   #   ls3  - list the contents of a directory.  For each file in the
   #    selected directory the filename followed by the full output of
   #    the stat function is returned.  The returned info for each
   #    file are separated by ':'.  The stat fields are separated by &'s.
   # Parameters:
   #    $cmd        - The command that dispatched us (ls).
   #    $tail       - The tail of the request that invoked us.
   #                  $tail is a : separated list of the following:
   #                   - $ulsdir - directory path to list (before prepending)
   #                   - $getpropath = 1 if &propath() should prepend
   #                   - $getuserdir = 1 if path to user dir in lonUsers should
   #                                     prepend
   #                   - $alternate_root - path to prepend
   #                   - $uname - username to use for &propath or user dir
   #                   - $udom - domain to use for &propath or user dir
   #            All of these except $getpropath and &getuserdir are escaped.    
   #                  no_such_dir.
   #    $client     - Socket open on the client.
   # Returns:
   #     1 - indicating that the daemon should not disconnect.
   # Side Effects:
   #   The reply is written to $client.
   #
   
   sub ls3_handler {
       my ($cmd, $tail, $client) = @_;
       my $userinput = "$cmd:$tail";
       my ($ulsdir,$getpropath,$getuserdir,$alternate_root,$uname,$udom) =
           split(/:/,$tail);
       if (defined($ulsdir)) {
           $ulsdir = &unescape($ulsdir);
       }
       if (defined($alternate_root)) {
           $alternate_root = &unescape($alternate_root);
       }
       if (defined($uname)) {
           $uname = &unescape($uname);
       }
       if (defined($udom)) {
           $udom = &unescape($udom);
       }
   
       my $dir_root = $perlvar{'lonDocRoot'};
       if ($getpropath) {
           if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) {
               $dir_root = &propath($udom,$uname);
               $dir_root =~ s/\/$//;
           } else {
               &Failure($client,"refused\n","$cmd:$tail");
               return 1;
           }
       } elsif ($getuserdir) {
           if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) {
               my $subdir=$uname.'__';
               $subdir =~ s/(.)(.)(.).*/$1\/$2\/$3/;
               $dir_root = $Apache::lonnet::perlvar{'lonUsersDir'}
                          ."/$udom/$subdir/$uname";
           } else {
               &Failure($client,"refused\n","$cmd:$tail");
               return 1;
           }
       } elsif ($alternate_root ne '') {
           $dir_root = $alternate_root;
       }
       if (($dir_root ne '') && ($dir_root ne '/')) {
           if ($ulsdir =~ /^\//) {
               $ulsdir = $dir_root.$ulsdir;
           } else {
               $ulsdir = $dir_root.'/'.$ulsdir;
           }
       }
       my $obs;
       my $rights;
       my $ulsout='';
       my $ulsfn;
       if (-e $ulsdir) {
           if(-d $ulsdir) {
               if (opendir(LSDIR,$ulsdir)) {
                   while ($ulsfn=readdir(LSDIR)) {
                       undef($obs);
                       undef($rights);
                       my @ulsstats=stat($ulsdir.'/'.$ulsfn);
                       #We do some obsolete checking here
                       if(-e $ulsdir.'/'.$ulsfn.".meta") {
                           open(FILE, $ulsdir.'/'.$ulsfn.".meta");
                           my @obsolete=<FILE>;
                           foreach my $obsolete (@obsolete) {
                               if($obsolete =~ m/(<obsolete>)(on|1)/) { $obs = 1; }
                               if($obsolete =~ m|(<copyright>)(default)|) {
                                   $rights = 1;
                               }
                           }
                       }
                       my $tmp = $ulsfn.'&'.join('&',@ulsstats);
                       if ($obs    eq '1') { $tmp.="&1"; } else { $tmp.="&0"; }
                       if ($rights eq '1') { $tmp.="&1"; } else { $tmp.="&0"; }
                       $ulsout.= &escape($tmp).':';
                   }
                   closedir(LSDIR);
               }
           } else {
               my @ulsstats=stat($ulsdir);
               $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':';
           }
       } else {
           $ulsout='no_such_dir';
       }
       if ($ulsout eq '') { $ulsout='empty'; }
       &Reply($client, \$ulsout, $userinput); # This supports debug logging.
       return 1;
   }
   &register_handler("ls3", \&ls3_handler, 0, 1, 0);
   
   sub server_timezone_handler {
       my ($cmd,$tail,$client) = @_;
       my $userinput = "$cmd:$tail";
       my $timezone;
       my $clockfile = '/etc/sysconfig/clock'; # Fedora/CentOS/SuSE
       my $tzfile = '/etc/timezone'; # Debian/Ubuntu
       if (-e $clockfile) {
           if (open(my $fh,"<$clockfile")) {
               while (<$fh>) {
                   next if (/^[\#\s]/);
                   if (/^(?:TIME)?ZONE\s*=\s*['"]?\s*([\w\/]+)/) {
                       $timezone = $1;
                       last;
                   }
               }
               close($fh);
           }
       } elsif (-e $tzfile) {
           if (open(my $fh,"<$tzfile")) {
               $timezone = <$fh>;
               close($fh);
               chomp($timezone);
               if ($timezone =~ m{^Etc/(\w+)$}) {
                   $timezone = $1;
               }
           }
       }
       &Reply($client,\$timezone,$userinput); # This supports debug logging.
       return 1;
   }
   &register_handler("servertimezone", \&server_timezone_handler, 0, 1, 0);
   
   sub server_loncaparev_handler {
       my ($cmd,$tail,$client) = @_;
       my $userinput = "$cmd:$tail";
       &Reply($client,\$perlvar{'lonVersion'},$userinput);
       return 1;
   }
   &register_handler("serverloncaparev", \&server_loncaparev_handler, 0, 1, 0);
   
 #   Process a reinit request.  Reinit requests that either  #   Process a reinit request.  Reinit requests that either
 #   lonc or lond be reinitialized so that an updated   #   lonc or lond be reinitialized so that an updated 
Line 1514  sub authenticate_handler { Line 1760  sub authenticate_handler {
     #  udom    - User's domain.      #  udom    - User's domain.
     #  uname   - Username.      #  uname   - Username.
     #  upass   - User's password.      #  upass   - User's password.
       #  checkdefauth - Pass to validate_user() to try authentication
       #                 with default auth type(s) if no user account.
           
     my ($udom,$uname,$upass)=split(/:/,$tail);      my ($udom, $uname, $upass, $checkdefauth)=split(/:/,$tail);
     &Debug(" Authenticate domain = $udom, user = $uname, password = $upass");      &Debug(" Authenticate domain = $udom, user = $uname, password = $upass,  checkdefauth = $checkdefauth");
     chomp($upass);      chomp($upass);
     $upass=&unescape($upass);      $upass=&unescape($upass);
   
     my $pwdcorrect = &validate_user($udom, $uname, $upass);      my $pwdcorrect = &validate_user($udom,$uname,$upass,$checkdefauth);
     if($pwdcorrect) {      if($pwdcorrect) {
  &Reply( $client, "authorized\n", $userinput);   &Reply( $client, "authorized\n", $userinput);
  #   #
Line 3426  sub put_course_id_hash_handler { Line 3674  sub put_course_id_hash_handler {
 #                            will be returned. Pre-2.2.0 legacy entries from   #                            will be returned. Pre-2.2.0 legacy entries from 
 #                            nohist_courseiddump will only contain usernames.  #                            nohist_courseiddump will only contain usernames.
 #                 type     - optional parameter for selection   #                 type     - optional parameter for selection 
 #                 regexp_ok - if true, allow the supplied institutional code  #                 regexp_ok - if 1 or -1 allow the supplied institutional code
 #                            filter to behave as a regular expression.    #                            filter to behave as a regular expression:
   #                      1 will not exclude the course if the instcode matches the RE 
   #                            -1 will exclude the course if the instcode matches the RE
 #                 rtn_as_hash - whether to return the information available for  #                 rtn_as_hash - whether to return the information available for
 #                            each matched item as a frozen hash of all   #                            each matched item as a frozen hash of all 
 #                            key, value pairs in the item's hash, or as a   #                            key, value pairs in the item's hash, or as a 
 #                            colon-separated list of (in order) description,  #                            colon-separated list of (in order) description,
 #                            institutional code, and course owner.  #                            institutional code, and course owner.
 #      #                 selfenrollonly - filter by courses allowing self-enrollment  
   #                                  now or in the future (selfenrollonly = 1).
   #                 catfilter - filter by course category, assigned to a course 
   #                             using manually defined categories (i.e., not
   #                             self-cataloging based on on institutional code).   
   #                 showhidden - include course in results even if course  
   #                              was set to be excluded from course catalog (DC only).
   #                 caller -  if set to 'coursecatalog', courses set to be hidden
   #                           from course catalog will be excluded from results (unless
   #                           overridden by "showhidden".
   #                 cloner - escaped username:domain of course cloner (if picking course to# 
   #                          clone).
   #                 cc_clone_list - escaped comma separated list of courses for which 
   #                                 course cloner has active CC role (and so can clone
   #                                 automatically).
   #                 cloneonly - filter by courses for which cloner has rights to clone. 
   #
 #     $client  - The socket open on the client.  #     $client  - The socket open on the client.
 # Returns:  # Returns:
 #    1     - Continue processing.  #    1     - Continue processing.
Line 3444  sub dump_course_id_handler { Line 3710  sub dump_course_id_handler {
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
     my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter,      my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter,
         $typefilter,$regexp_ok,$rtn_as_hash) =split(/:/,$tail);          $typefilter,$regexp_ok,$rtn_as_hash,$selfenrollonly,$catfilter,$showhidden,
           $caller,$cloner,$cc_clone_list,$cloneonly) =split(/:/,$tail);
       my $now = time;
       my ($cloneruname,$clonerudom,%cc_clone);
     if (defined($description)) {      if (defined($description)) {
  $description=&unescape($description);   $description=&unescape($description);
     } else {      } else {
Line 3484  sub dump_course_id_handler { Line 3753  sub dump_course_id_handler {
     if (defined($regexp_ok)) {      if (defined($regexp_ok)) {
         $regexp_ok=&unescape($regexp_ok);          $regexp_ok=&unescape($regexp_ok);
     }      }
       if (defined($catfilter)) {
           $catfilter=&unescape($catfilter);
       }
       if (defined($cloner)) {
           $cloner = &unescape($cloner);
           ($cloneruname,$clonerudom) = ($cloner =~ /^($LONCAPA::match_username):($LONCAPA::match_domain)$/); 
       }
       if (defined($cc_clone_list)) {
           $cc_clone_list = &unescape($cc_clone_list);
           my @cc_cloners = split('&',$cc_clone_list);
           foreach my $cid (@cc_cloners) {
               my ($clonedom,$clonenum) = split(':',$cid);
               next if ($clonedom ne $udom); 
               $cc_clone{$clonedom.'_'.$clonenum} = 1;
           } 
       }
       
     my $unpack = 1;      my $unpack = 1;
     if ($description eq '.' && $instcodefilter eq '.' && $coursefilter eq '.' &&       if ($description eq '.' && $instcodefilter eq '.' && $coursefilter eq '.' && 
         $typefilter eq '.') {          $typefilter eq '.') {
Line 3494  sub dump_course_id_handler { Line 3780  sub dump_course_id_handler {
     my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT());      my $hashref = &tie_domain_hash($udom, "nohist_courseids", &GDBM_WRCREAT());
     if ($hashref) {      if ($hashref) {
  while (my ($key,$value) = each(%$hashref)) {   while (my ($key,$value) = each(%$hashref)) {
             my ($unesc_key,$lasttime_key,$lasttime,$is_hash,%val,%unesc_val);              my ($unesc_key,$lasttime_key,$lasttime,$is_hash,%val,
                   %unesc_val,$selfenroll_end,$selfenroll_types);
             $unesc_key = &unescape($key);              $unesc_key = &unescape($key);
             if ($unesc_key =~ /^lasttime:/) {              if ($unesc_key =~ /^lasttime:/) {
                 next;                  next;
Line 3505  sub dump_course_id_handler { Line 3792  sub dump_course_id_handler {
                 $lasttime = $hashref->{$lasttime_key};                  $lasttime = $hashref->{$lasttime_key};
                 next if ($lasttime<$since);                  next if ($lasttime<$since);
             }              }
               my ($canclone,$valchange);
             my $items = &Apache::lonnet::thaw_unescape($value);              my $items = &Apache::lonnet::thaw_unescape($value);
             if (ref($items) eq 'HASH') {              if (ref($items) eq 'HASH') {
                 $is_hash =  1;                  $is_hash =  1;
                   if (defined($clonerudom)) {
                       if ($items->{'cloners'}) {
                           my @cloneable = split(',',$items->{'cloners'});
                           if (@cloneable) {
                               if (grep(/^\*$/,@cloneable))  {
                                   $canclone = 1;
                               } elsif (grep(/^\*:\Q$clonerudom\E$/,@cloneable)) {
                                   $canclone = 1;
                               } elsif (grep(/^\Q$cloneruname\E:\Q$clonerudom\E$/,@cloneable)) {
                                   $canclone = 1;
                               }
                           }
                           unless ($canclone) {
                               if ($cloneruname ne '' && $clonerudom ne '') {
                                   if ($cc_clone{$unesc_key}) {
                                       $canclone = 1;
                                       $items->{'cloners'} .= ','.$cloneruname.':'.
                                                              $clonerudom;
                                       $valchange = 1;
                                   }
                               }
                           }
                       } elsif (defined($cloneruname)) {
                           if ($cc_clone{$unesc_key}) {
                               $canclone = 1;
                               $items->{'cloners'} = $cloneruname.':'.$clonerudom;
                               $valchange = 1;
                           }
                       }
                   }
                 if ($unpack || !$rtn_as_hash) {                  if ($unpack || !$rtn_as_hash) {
                     $unesc_val{'descr'} = $items->{'description'};                      $unesc_val{'descr'} = $items->{'description'};
                     $unesc_val{'inst_code'} = $items->{'inst_code'};                      $unesc_val{'inst_code'} = $items->{'inst_code'};
                     $unesc_val{'owner'} = $items->{'owner'};                      $unesc_val{'owner'} = $items->{'owner'};
                     $unesc_val{'type'} = $items->{'type'};                      $unesc_val{'type'} = $items->{'type'};
                       $unesc_val{'cloners'} = $items->{'cloners'};
                   }
                   $selfenroll_types = $items->{'selfenroll_types'};
                   $selfenroll_end = $items->{'selfenroll_end_date'};
                   if ($selfenrollonly) {
                       next if (!$selfenroll_types);
                       if (($selfenroll_end > 0) && ($selfenroll_end <= $now)) {
                           next;
                       }
                   }
                   if ($catfilter ne '') {
                       next if ($items->{'categories'} eq '');
                       my @categories = split('&',$items->{'categories'}); 
                       next if (@categories == 0);
                       my @subcats = split('&',$catfilter);
                       my $matchcat = 0;
                       foreach my $cat (@categories) {
                           if (grep(/^\Q$cat\E$/,@subcats)) {
                               $matchcat = 1;
                               last;
                           }
                       }
                       next if (!$matchcat);
                   }
                   if ($caller eq 'coursecatalog') {
                       if ($items->{'hidefromcat'} eq 'yes') {
                           next if !$showhidden;
                       }
                 }                  }
             } else {              } else {
                   next if ($catfilter ne '');
                   next if ($selfenrollonly);
                   if ((defined($clonerudom)) && (defined($cloneruname)))  {
                       if ($cc_clone{$unesc_key}) {
                           $canclone = 1;
                           $val{'cloners'} = &escape($cloneruname.':'.$clonerudom);
                       }
                   }
                 $is_hash =  0;                  $is_hash =  0;
                 my @courseitems = split(/:/,$value);                  my @courseitems = split(/:/,$value);
                 $lasttime = pop(@courseitems);                  $lasttime = pop(@courseitems);
Line 3523  sub dump_course_id_handler { Line 3877  sub dump_course_id_handler {
                 }                  }
         ($val{'descr'},$val{'inst_code'},$val{'owner'},$val{'type'}) = @courseitems;          ($val{'descr'},$val{'inst_code'},$val{'owner'},$val{'type'}) = @courseitems;
             }              }
               if ($cloneonly) {
                  next unless ($canclone);
               }
             my $match = 1;              my $match = 1;
     if ($description ne '.') {      if ($description ne '.') {
                 if (!$is_hash) {                  if (!$is_hash) {
Line 3536  sub dump_course_id_handler { Line 3893  sub dump_course_id_handler {
                 if (!$is_hash) {                  if (!$is_hash) {
                     $unesc_val{'inst_code'} = &unescape($val{'inst_code'});                      $unesc_val{'inst_code'} = &unescape($val{'inst_code'});
                 }                  }
                 if ($regexp_ok) {                  if ($regexp_ok == 1) {
                     if (eval{$unesc_val{'inst_code'} !~ /$instcodefilter/}) {                      if (eval{$unesc_val{'inst_code'} !~ /$instcodefilter/}) {
                         $match = 0;                          $match = 0;
                     }                      }
                   } elsif ($regexp_ok == -1) {
                       if (eval{$unesc_val{'inst_code'} =~ /$instcodefilter/}) {
                           $match = 0;
                       }
                 } else {                  } else {
                     if (eval{$unesc_val{'inst_code'} !~ /\Q$instcodefilter\E/i}) {                      if (eval{$unesc_val{'inst_code'} !~ /\Q$instcodefilter\E/i}) {
                         $match = 0;                          $match = 0;
Line 3605  sub dump_course_id_handler { Line 3966  sub dump_course_id_handler {
             if ($match == 1) {              if ($match == 1) {
                 if ($rtn_as_hash) {                  if ($rtn_as_hash) {
                     if ($is_hash) {                      if ($is_hash) {
                         $qresult.=$key.'='.$value.'&';                          if ($valchange) {
                               my $newvalue = &Apache::lonnet::freeze_escape($items);
                               $qresult.=$key.'='.$newvalue.'&';
                           } else {
                               $qresult.=$key.'='.$value.'&';
                           }
                     } else {                      } else {
                         my %rtnhash = ( 'description' => &unescape($val{'descr'}),                          my %rtnhash = ( 'description' => &unescape($val{'descr'}),
                                         'inst_code' => &unescape($val{'inst_code'}),                                          'inst_code' => &unescape($val{'inst_code'}),
                                         'owner'     => &unescape($val{'owner'}),                                          'owner'     => &unescape($val{'owner'}),
                                         'type'      => &unescape($val{'type'}),                                          'type'      => &unescape($val{'type'}),
                                           'cloners'   => &unescape($val{'cloners'}),
                                       );                                        );
                         my $items = &Apache::lonnet::freeze_escape(\%rtnhash);                          my $items = &Apache::lonnet::freeze_escape(\%rtnhash);
                         $qresult.=$key.'='.$items.'&';                          $qresult.=$key.'='.$items.'&';
Line 3685  sub put_domain_handler { Line 4052  sub put_domain_handler {
 }  }
 &register_handler("putdom", \&put_domain_handler, 0, 1, 0);  &register_handler("putdom", \&put_domain_handler, 0, 1, 0);
   
   #
   # Puts a piece of new data in a namespace db file at the domain level 
   # returns error if key already exists
   #
   # Parameters:
   #    $cmd      - The command that got us here.
   #    $tail     - Tail of the command (remaining parameters).
   #    $client   - File descriptor connected to client.
   # Returns
   #     0        - Requested to exit, caller should shut down.
   #     1        - Continue processing.
   #  Side effects:
   #     reply is written to $client.
   #
   sub newput_domain_handler {
       my ($cmd, $tail, $client)  = @_;
   
       my $userinput = "$cmd:$tail";
   
       my ($udom,$namespace,$what) =split(/:/,$tail,3);
       chomp($what);
       my $hashref = &tie_domain_hash($udom, "$namespace", &GDBM_WRCREAT(),
                                      "N", $what);
       if(!$hashref) {
           &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
                     "while attempting newputdom\n", $userinput);
           return 1;
       }
   
       my @pairs=split(/\&/,$what);
       foreach my $pair (@pairs) {
           my ($key,$value)=split(/=/,$pair);
           if (exists($hashref->{$key})) {
               &Failure($client, "key_exists: ".$key."\n",$userinput);
               return 1;
           }
       }
   
       foreach my $pair (@pairs) {
           my ($key,$value)=split(/=/,$pair);
           $hashref->{$key}=$value;
       }
   
       if (&untie_domain_hash($hashref)) {
           &Reply( $client, "ok\n", $userinput);
       } else {
           &Failure($client, "error: ".($!+0)." untie(GDBM) failed ".
                    "while attempting newputdom\n",
                    $userinput);
       }
       return 1;
   }
   &register_handler("newputdom", \&newput_domain_handler, 0, 1, 0);
   
 # Unencrypted get from the namespace database file at the domain level.  # Unencrypted get from the namespace database file at the domain level.
 # This function retrieves a keyed item from a specific named database in the  # This function retrieves a keyed item from a specific named database in the
 # domain directory.  # domain directory.
Line 3734  sub get_domain_handler { Line 4155  sub get_domain_handler {
 }  }
 &register_handler("getdom", \&get_domain_handler, 0, 1, 0);  &register_handler("getdom", \&get_domain_handler, 0, 1, 0);
   
   #
   #   Deletes a key in a user profile database.
   #  
   #   Parameters:
   #       $cmd                  - Command keyword (deldom).
   #       $tail                 - Command tail.  IN this case a colon
   #                               separated list containing:
   #                               the domain to which the database file belongs;  
   #                               the namespace (name of the database file);
   #                               & separated list of keys to delete.
   #       $client              - File open on client socket.
   # Returns:
   #     1   - Continue processing
   #     0   - Exit server.
   #
   #
   sub delete_domain_entry {
       my ($cmd, $tail, $client) = @_;
   
       my $userinput = "cmd:$tail";
   
       my ($udom,$namespace,$what) = split(/:/,$tail);
       chomp($what);
       my $hashref = &tie_domain_hash($udom, $namespace, &GDBM_WRCREAT(),
                                    "D",$what);
       if ($hashref) {
           my @keys=split(/\&/,$what);
           foreach my $key (@keys) {
               delete($hashref->{$key});
           }
           if (&untie_user_hash($hashref)) {
               &Reply($client, "ok\n", $userinput);
           } else {
               &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
                       "while attempting deldom\n", $userinput);
           }
       } else {
           &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
                    "while attempting deldom\n", $userinput);
       }
       return 1;
   }
   &register_handler("deldom", \&delete_domain_entry, 0, 1, 0);
   
 #  #
 #  Puts an id to a domains id database.   #  Puts an id to a domains id database. 
Line 3832  sub get_id_handler { Line 4296  sub get_id_handler {
 }  }
 &register_handler("idget", \&get_id_handler, 0, 1, 0);  &register_handler("idget", \&get_id_handler, 0, 1, 0);
   
   sub dump_dom_with_regexp {
       my ($cmd, $tail, $client) = @_;
       my $userinput = "$cmd:$tail";
       my ($udom,$namespace,$regexp,$range)=split(/:/,$tail);
       if (defined($regexp)) {
           $regexp=&unescape($regexp);
       } else {
           $regexp='.';
       }
       my ($start,$end);
       if (defined($range)) {
           if ($range =~/^(\d+)\-(\d+)$/) {
               ($start,$end) = ($1,$2);
           } elsif ($range =~/^(\d+)$/) {
               ($start,$end) = (0,$1);
           } else {
               undef($range);
           }
       }
       my $hashref = &tie_domain_hash($udom, $namespace, &GDBM_READER());
       if ($hashref) {
           my $qresult='';
           my $count=0;
           while (my ($key,$value) = each(%$hashref)) {
               if ($regexp eq '.') {
                   $count++;
                   if (defined($range) && $count >= $end)   { last; }
                   if (defined($range) && $count <  $start) { next; }
                   $qresult.=$key.'='.$value.'&';
               } else {
                   my $unescapeKey = &unescape($key);
                   if (eval('$unescapeKey=~/$regexp/')) {
                       $count++;
                       if (defined($range) && $count >= $end)   { last; }
                       if (defined($range) && $count <  $start) { next; }
                       $qresult.="$key=$value&";
                   }
               }
           }
           if (&untie_user_hash($hashref)) {
               chop($qresult);
               &Reply($client, \$qresult, $userinput);
           } else {
               &Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ".
                        "while attempting dump\n", $userinput);
           }
       } else {
           &Failure($client, "error: ".($!+0)." tie(GDBM) Failed ".
                   "while attempting dump\n", $userinput);
       }
       return 1;
   }
   &register_handler("dumpdom", \&dump_dom_with_regexp, 0, 1, 0);
   
 #  #
 # Puts broadcast e-mail sent by Domain Coordinator in nohist_dcmail database   # Puts broadcast e-mail sent by Domain Coordinator in nohist_dcmail database 
 #  #
Line 4041  sub dump_domainroles_handler { Line 4559  sub dump_domainroles_handler {
         $rolesfilter=&unescape($rolesfilter);          $rolesfilter=&unescape($rolesfilter);
  @roles = split(/\&/,$rolesfilter);   @roles = split(/\&/,$rolesfilter);
     }      }
                                                                                              
     my $hashref = &tie_domain_hash($udom, "nohist_domainroles", &GDBM_WRCREAT());      my $hashref = &tie_domain_hash($udom, "nohist_domainroles", &GDBM_WRCREAT());
     if ($hashref) {      if ($hashref) {
         my $qresult = '';          my $qresult = '';
         while (my ($key,$value) = each(%$hashref)) {          while (my ($key,$value) = each(%$hashref)) {
             my $match = 1;              my $match = 1;
             my ($start,$end) = split(/:/,&unescape($value));              my ($end,$start) = split(/:/,&unescape($value));
             my ($trole,$uname,$udom,$runame,$rudom,$rsec) = split(/:/,&unescape($key));              my ($trole,$uname,$udom,$runame,$rudom,$rsec) = split(/:/,&unescape($key));
             unless ($startfilter eq '.' || !defined($startfilter)) {              unless (@roles < 1) {
                 if ($start >= $startfilter) {                  unless (grep/^\Q$trole\E$/,@roles) {
                     $match = 0;                      $match = 0;
                       next;
                 }                  }
             }              }
             unless ($endfilter eq '.' || !defined($endfilter)) {              unless ($startfilter eq '.' || !defined($startfilter)) {
                 if ($end <= $endfilter) {                  if ((defined($start)) && ($start >= $startfilter)) {
                     $match = 0;                      $match = 0;
                       next;
                 }                  }
             }              }
             unless (@roles < 1) {              unless ($endfilter eq '.' || !defined($endfilter)) {
                 unless (grep/^\Q$trole\E$/,@roles) {                  if ((defined($end)) && (($end > 0) && ($end <= $endfilter))) {
                     $match = 0;                      $match = 0;
                       next;
                 }                  }
             }              }
             if ($match == 1) {              if ($match == 1) {
Line 4348  sub enrollment_enabled_handler { Line 4869  sub enrollment_enabled_handler {
 }  }
 &register_handler("autorun", \&enrollment_enabled_handler, 0, 1, 0);  &register_handler("autorun", \&enrollment_enabled_handler, 0, 1, 0);
   
   #
   #   Validate an institutional code used for a LON-CAPA course.          
   #
   # Formal Parameters:
   #   $cmd          - The command request that got us dispatched.
   #   $tail         - The tail of the command.  In this case,
   #                   this is a colon separated set of words that will be split
   #                   into:
   #                        $dom      - The domain for which the check of 
   #                                    institutional course code will occur.
   #
   #                        $instcode - The institutional code for the course
   #                                    being requested, or validated for rights
   #                                    to request.
   #
   #                        $owner    - The course requestor (who will be the
   #                                    course owner, in the form username:domain
   #
   #   $client       - Socket open on the client.
   # Returns:
   #    1           - Indicating processing should continue.
   #
   sub validate_instcode_handler {
       my ($cmd, $tail, $client) = @_;
       my $userinput = "$cmd:$tail";
       my ($dom,$instcode,$owner) = split(/:/, $tail);
       $instcode = &unescape($instcode);
       $owner = &unescape($owner);
       my $outcome=&localenroll::validate_instcode($dom,$instcode,$owner);
       &Reply($client, \$outcome, $userinput);
   
       return 1;
   }
   &register_handler("autovalidateinstcode", \&validate_instcode_handler, 0, 1, 0);
   
 #   Get the official sections for which auto-enrollment is possible.  #   Get the official sections for which auto-enrollment is possible.
 #   Since the admin people won't know about 'unofficial sections'   #   Since the admin people won't know about 'unofficial sections' 
 #   we cannot auto-enroll on them.  #   we cannot auto-enroll on them.
Line 4551  sub retrieve_auto_file_handler { Line 5107  sub retrieve_auto_file_handler {
 }  }
 &register_handler("autoretrieve", \&retrieve_auto_file_handler, 0,1,0);  &register_handler("autoretrieve", \&retrieve_auto_file_handler, 0,1,0);
   
   sub crsreq_checks_handler {
       my ($cmd, $tail, $client) = @_;
       my $userinput = "$cmd:$tail";
       my $dom = $tail;
       my $result;
       my @reqtypes = ('official','unofficial','community');
       eval {
           local($SIG{__DIE__})='DEFAULT';
           my %validations;
           my $response = &localenroll::crsreq_checks($dom,\@reqtypes,
                                                      \%validations);
           if ($response eq 'ok') { 
               foreach my $key (keys(%validations)) {
                   $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($validations{$key}).'&';
               }
               $result =~ s/\&$//;
           } else {
               $result = 'error';
           }
       };
       if (!$@) {
           &Reply($client, \$result, $userinput);
       } else {
           &Failure($client,"unknown_cmd\n",$userinput);
       }
       return 1;
   }
   &register_handler("autocrsreqchecks", \&crsreq_checks_handler, 0, 1, 0);
   
   sub validate_crsreq_handler {
       my ($cmd, $tail, $client) = @_;
       my $userinput = "$cmd:$tail";
       my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist) = split(/:/, $tail);
       $instcode = &unescape($instcode);
       $owner = &unescape($owner);
       $crstype = &unescape($crstype);
       $inststatuslist = &unescape($inststatuslist);
       $instcode = &unescape($instcode);
       $instseclist = &unescape($instseclist);
       my $outcome;
       eval {
           local($SIG{__DIE__})='DEFAULT';
           $outcome = &localenroll::validate_crsreq($dom,$owner,$crstype,
                                                    $inststatuslist,$instcode,
                                                    $instseclist);
       };
       if (!$@) {
           &Reply($client, \$outcome, $userinput);
       } else {
           &Failure($client,"unknown_cmd\n",$userinput);
       }
       return 1;
   }
   &register_handler("autocrsreqvalidation", \&validate_crsreq_handler, 0, 1, 0);
   
 #  #
 #   Read and retrieve institutional code format (for support form).  #   Read and retrieve institutional code format (for support form).
 # Formal Parameters:  # Formal Parameters:
Line 4635  sub get_institutional_defaults_handler { Line 5246  sub get_institutional_defaults_handler {
 &register_handler("autoinstcodedefaults",  &register_handler("autoinstcodedefaults",
                   \&get_institutional_defaults_handler,0,1,0);                    \&get_institutional_defaults_handler,0,1,0);
   
   sub get_possible_instcodes_handler {
       my ($cmd, $tail, $client)   = @_;
       my $userinput               = "$cmd:$tail";
   
       my $reply;
       my $cdom = $tail;
       my (@codetitles,%cat_titles,%cat_order,@code_order);
       my $formatreply = &localenroll::possible_instcodes($cdom,
                                                          \@codetitles,
                                                          \%cat_titles,
                                                          \%cat_order,
                                                          \@code_order);
       if ($formatreply eq 'ok') {
           my $result = join('&',map {&escape($_);} (@codetitles)).':';
           $result .= join('&',map {&escape($_);} (@code_order)).':';
           foreach my $key (keys(%cat_titles)) {
               $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($cat_titles{$key}).'&';
           }
           $result =~ s/\&$//;
           $result .= ':';
           foreach my $key (keys(%cat_order)) {
               $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($cat_order{$key}).'&';
           }
           $result =~ s/\&$//;
           &Reply($client,\$result,$userinput);
       } else {
           &Reply($client, "format_error\n", $userinput);
       }
       return 1;
   }
   &register_handler("autopossibleinstcodes",
                     \&get_possible_instcodes_handler,0,1,0);
   
 sub get_institutional_user_rules {  sub get_institutional_user_rules {
     my ($cmd, $tail, $client)   = @_;      my ($cmd, $tail, $client)   = @_;
     my $userinput               = "$cmd:$tail";      my $userinput               = "$cmd:$tail";
Line 4703  sub get_institutional_id_rules { Line 5347  sub get_institutional_id_rules {
 }  }
 &register_handler("instidrules",\&get_institutional_id_rules,0,1,0);  &register_handler("instidrules",\&get_institutional_id_rules,0,1,0);
   
   sub get_institutional_selfcreate_rules {
       my ($cmd, $tail, $client)   = @_;
       my $userinput               = "$cmd:$tail";
       my $dom = &unescape($tail);
       my (%rules_hash,@rules_order);
       my $outcome;
       eval {
           local($SIG{__DIE__})='DEFAULT';
           $outcome = &localenroll::selfcreate_rules($dom,\%rules_hash,\@rules_order);
       };
       if (!$@) {
           if ($outcome eq 'ok') {
               my $result;
               foreach my $key (keys(%rules_hash)) {
                   $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rules_hash{$key}).'&';
               }
               $result =~ s/\&$//;
               $result .= ':';
               if (@rules_order > 0) {
                   foreach my $item (@rules_order) {
                       $result .= &escape($item).'&';
                   }
               }
               $result =~ s/\&$//;
               &Reply($client,\$result,$userinput);
           } else {
               &Reply($client,"error\n", $userinput);
           }
       } else {
           &Failure($client,"unknown_cmd\n",$userinput);
       }
   }
   &register_handler("instemailrules",\&get_institutional_selfcreate_rules,0,1,0);
   
   
 sub institutional_username_check {  sub institutional_username_check {
     my ($cmd, $tail, $client)   = @_;      my ($cmd, $tail, $client)   = @_;
Line 4762  sub institutional_id_check { Line 5440  sub institutional_id_check {
 }  }
 &register_handler("instidrulecheck",\&institutional_id_check,0,1,0);  &register_handler("instidrulecheck",\&institutional_id_check,0,1,0);
   
   sub institutional_selfcreate_check {
       my ($cmd, $tail, $client)   = @_;
       my $userinput               = "$cmd:$tail";
       my %rulecheck;
       my $outcome;
       my ($udom,$email,@rules) = split(/:/,$tail);
       $udom = &unescape($udom);
       $email = &unescape($email);
       @rules = map {&unescape($_);} (@rules);
       eval {
           local($SIG{__DIE__})='DEFAULT';
           $outcome = &localenroll::selfcreate_check($udom,$email,\@rules,\%rulecheck);
       };
       if (!$@) {
           if ($outcome eq 'ok') {
               my $result='';
               foreach my $key (keys(%rulecheck)) {
                   $result.=&escape($key).'='.&Apache::lonnet::freeze_escape($rulecheck{$key}).'&';
               }
               &Reply($client,\$result,$userinput);
           } else {
               &Reply($client,"error\n", $userinput);
           }
       } else {
           &Failure($client,"unknown_cmd\n",$userinput);
       }
   }
   &register_handler("instselfcreatecheck",\&institutional_selfcreate_check,0,1,0);
   
 # Get domain specific conditions for import of student photographs to a course  # Get domain specific conditions for import of student photographs to a course
 #  #
 # Retrieves information from photo_permission subroutine in localenroll.  # Retrieves information from photo_permission subroutine in localenroll.
Line 5654  sub make_new_child { Line 6361  sub make_new_child {
  if ($clientip eq '127.0.0.1') {   if ($clientip eq '127.0.0.1') {
     $outsideip=&Apache::lonnet::get_host_ip($perlvar{'lonHostID'});      $outsideip=&Apache::lonnet::get_host_ip($perlvar{'lonHostID'});
  }   }
    &ReadManagerTable();
  my $clientrec=defined(&Apache::lonnet::get_hosts_from_ip($outsideip));   my $clientrec=defined(&Apache::lonnet::get_hosts_from_ip($outsideip));
  my $ismanager=($managers{$outsideip}    ne undef);   my $ismanager=($managers{$outsideip}    ne undef);
  $clientname  = "[unknonwn]";   $clientname  = "[unknonwn]";
Line 5972  sub get_auth_type Line 6679  sub get_auth_type
 #     0        - The domain,user,password triplet is not a valid user.  #     0        - The domain,user,password triplet is not a valid user.
 #  #
 sub validate_user {  sub validate_user {
     my ($domain, $user, $password) = @_;      my ($domain, $user, $password, $checkdefauth) = @_;
   
   
     # Why negative ~pi you may well ask?  Well this function is about      # Why negative ~pi you may well ask?  Well this function is about
     # authentication, and therefore very important to get right.      # authentication, and therefore very important to get right.
Line 5996  sub validate_user { Line 6702  sub validate_user {
   
     my $null = pack("C",0); # Used by kerberos auth types.      my $null = pack("C",0); # Used by kerberos auth types.
   
       if ($howpwd eq 'nouser') {
           if ($checkdefauth) {
               my %domdefaults = &Apache::lonnet::get_domain_defaults($domain);
               if ($domdefaults{'auth_def'} eq 'localauth') {
                   $howpwd = $domdefaults{'auth_def'};
                   $contentpwd = $domdefaults{'auth_arg_def'};
               } elsif ((($domdefaults{'auth_def'} eq 'krb4') || 
                         ($domdefaults{'auth_def'} eq 'krb5')) &&
                        ($domdefaults{'auth_arg_def'} ne '')) {
                   $howpwd = $domdefaults{'auth_def'};
                   $contentpwd = $domdefaults{'auth_arg_def'}; 
               }
           }
       } 
     if ($howpwd ne 'nouser') {      if ($howpwd ne 'nouser') {
   
  if($howpwd eq "internal") { # Encrypted is in local password file.   if($howpwd eq "internal") { # Encrypted is in local password file.
     $validated = (crypt($password, $contentpwd) eq $contentpwd);      $validated = (crypt($password, $contentpwd) eq $contentpwd);
  }   }
Line 6816  linux Line 7535  linux
 Server/Process  Server/Process
   
 =cut  =cut
   
   
   =pod
   
   =head1 LOG MESSAGES
   
   The messages below can be emitted in the lond log.  This log is located
   in ~httpd/perl/logs/lond.log  Many log messages have HTML encapsulation
   to provide coloring if examined from inside a web page. Some do not.
   Where color is used, the colors are; Red for sometihhng to get excited
   about and to follow up on. Yellow for something to keep an eye on to
   be sure it does not get worse, Green,and Blue for informational items.
   
   In the discussions below, sometimes reference is made to ~httpd
   when describing file locations.  There isn't really an httpd 
   user, however there is an httpd directory that gets installed in the
   place that user home directories go.  On linux, this is usually
   (always?) /home/httpd.
   
   
   Some messages are colorless.  These are usually (not always)
   Green/Blue color level messages.
   
   =over 2
   
   =item (Red)  LocalConnection rejecting non local: <ip> ne 127.0.0.1
   
   A local connection negotiation was attempted by
   a host whose IP address was not 127.0.0.1.
   The socket is closed and the child will exit.
   lond has three ways to establish an encyrption
   key with a client:
   
   =over 2
   
   =item local 
   
   The key is written and read from a file.
   This is only valid for connections from localhost.
   
   =item insecure 
   
   The key is generated by the server and
   transmitted to the client.
   
   =item  ssl (secure)
   
   An ssl connection is negotiated with the client,
   the key is generated by the server and sent to the 
   client across this ssl connection before the
   ssl connectionis terminated and clear text
   transmission resumes.
   
   =back
   
   =item (Red) LocalConnection: caller is insane! init = <init> and type = <type>
   
   The client is local but has not sent an initialization
   string that is the literal "init:local"  The connection
   is closed and the child exits.
   
   =item Red CRITICAL Can't get key file <error>        
   
   SSL key negotiation is being attempted but the call to
   lonssl::KeyFile  failed.  This usually means that the
   configuration file is not correctly defining or protecting
   the directories/files lonCertificateDirectory or
   lonnetPrivateKey
   <error> is a string that describes the reason that
   the key file could not be located.
   
   =item (Red) CRITICAL  Can't get certificates <error>  
   
   SSL key negotiation failed because we were not able to retrives our certificate
   or the CA's certificate in the call to lonssl::CertificateFile
   <error> is the textual reason this failed.  Usual reasons:
   
   =over 2
          
   =item Apache config file for loncapa  incorrect:
    
   one of the variables 
   lonCertificateDirectory, lonnetCertificateAuthority, or lonnetCertificate
   undefined or incorrect
   
   =item Permission error:
   
   The directory pointed to by lonCertificateDirectory is not readable by lond
   
   =item Permission error:
   
   Files in the directory pointed to by lonCertificateDirectory are not readable by lond.
   
   =item Installation error:                         
   
   Either the certificate authority file or the certificate have not
   been installed in lonCertificateDirectory.
   
   =item (Red) CRITICAL SSL Socket promotion failed:  <err> 
   
   The promotion of the connection from plaintext to SSL failed
   <err> is the reason for the failure.  There are two
   system calls involved in the promotion (one of which failed), 
   a dup to produce
   a second fd on the raw socket over which the encrypted data
   will flow and IO::SOcket::SSL->new_from_fd which creates
   the SSL connection on the duped fd.
   
   =item (Blue)   WARNING client did not respond to challenge 
   
   This occurs on an insecure (non SSL) connection negotiation request.
   lond generates some number from the time, the PID and sends it to
   the client.  The client must respond by echoing this information back.
   If the client does not do so, that's a violation of the challenge
   protocols and the connection will be failed.
   
   =item (Red) No manager table. Nobody can manage!!    
   
   lond has the concept of privileged hosts that
   can perform remote management function such
   as update the hosts.tab.   The manager hosts
   are described in the 
   ~httpd/lonTabs/managers.tab file.
   this message is logged if this file is missing.
   
   
   =item (Green) Registering manager <dnsname> as <cluster_name> with <ipaddress>
   
   Reports the successful parse and registration
   of a specific manager. 
   
   =item Green existing host <clustername:dnsname>  
   
   The manager host is already defined in the hosts.tab
   the information in that table, rather than the info in the
   manager table will be used to determine the manager's ip.
   
   =item (Red) Unable to craete <filename>                 
   
   lond has been asked to create new versions of an administrative
   file (by a manager).  When this is done, the new file is created
   in a temp file and then renamed into place so that there are always
   usable administrative files, even if the update fails.  This failure
   message means that the temp file could not be created.
   The update is abandoned, and the old file is available for use.
   
   =item (Green) CopyFile from <oldname> to <newname> failed
   
   In an update of administrative files, the copy of the existing file to a
   backup file failed.  The installation of the new file may still succeed,
   but there will not be a back up file to rever to (this should probably
   be yellow).
   
   =item (Green) Pushfile: backed up <oldname> to <newname>
   
   See above, the backup of the old administrative file succeeded.
   
   =item (Red)  Pushfile: Unable to install <filename> <reason>
   
   The new administrative file could not be installed.  In this case,
   the old administrative file is still in use.
   
   =item (Green) Installed new < filename>.                      
   
   The new administrative file was successfullly installed.                                               
   
   =item (Red) Reinitializing lond pid=<pid>                    
   
   The lonc child process <pid> will be sent a USR2 
   signal.
   
   =item (Red) Reinitializing self                                    
   
   We've been asked to re-read our administrative files,and
   are doing so.
   
   =item (Yellow) error:Invalid process identifier <ident>  
   
   A reinit command was received, but the target part of the 
   command was not valid.  It must be either
   'lond' or 'lonc' but was <ident>
   
   =item (Green) isValideditCommand checking: Command = <command> Key = <key> newline = <newline>
   
   Checking to see if lond has been handed a valid edit
   command.  It is possible the edit command is not valid
   in that case there are no log messages to indicate that.
   
   =item Result of password change for  <username> pwchange_success
   
   The password for <username> was
   successfully changed.
   
   =item Unable to open <user> passwd to change password
   
   Could not rewrite the 
   internal password file for a user
   
   =item Result of password change for <user> : <result>
                                                                        
   A unix password change for <user> was attempted 
   and the pipe returned <result>  
   
   =item LWP GET: <message> for <fname> (<remoteurl>)
   
   The lightweight process fetch for a resource failed
   with <message> the local filename that should
   have existed/been created was  <fname> the
   corresponding URI: <remoteurl>  This is emitted in several
   places.
   
   =item Unable to move <transname> to <destname>     
   
   From fetch_user_file_handler - the user file was replicated but could not
   be mv'd to its final location.
   
   =item Looking for <domain> <username>              
   
   From user_has_session_handler - This should be a Debug call instead
   it indicates lond is about to check whether the specified user has a 
   session active on the specified domain on the local host.
   
   =item Client <ip> (<name>) hanging up: <input>     
   
   lond has been asked to exit by its client.  The <ip> and <name> identify the
   client systemand <input> is the full exit command sent to the server.
   
   =item Red CRITICAL: ABNORMAL EXIT. child <pid> for server <hostname> died through a crass with this error->[<message>].
                                                    
   A lond child terminated.  NOte that this termination can also occur when the
   child receives the QUIT or DIE signals.  <pid> is the process id of the child,
   <hostname> the host lond is working for, and <message> the reason the child died
   to the best of our ability to get it (I would guess that any numeric value
   represents and errno value).  This is immediately followed by
   
   =item  Famous last words: Catching exception - <log> 
   
   Where log is some recent information about the state of the child.
   
   =item Red CRITICAL: TIME OUT <pid>                     
   
   Some timeout occured for server <pid>.  THis is normally a timeout on an LWP
   doing an HTTP::GET.
   
   =item child <pid> died                              
   
   The reaper caught a SIGCHILD for the lond child process <pid>
   This should be modified to also display the IP of the dying child
   $children{$pid}
   
   =item Unknown child 0 died                           
   A child died but the wait for it returned a pid of zero which really should not
   ever happen. 
   
   =item Child <which> - <pid> looks like we missed it's death 
   
   When a sigchild is received, the reaper process checks all children to see if they are
   alive.  If children are dying quite quickly, the lack of signal queuing can mean
   that a signal hearalds the death of more than one child.  If so this message indicates
   which other one died. <which> is the ip of a dead child
   
   =item Free socket: <shutdownretval>                
   
   The HUNTSMAN sub was called due to a SIGINT in a child process.  The socket is being shutdown.
   for whatever reason, <shutdownretval> is printed but in fact shutdown() is not documented
   to return anything. This is followed by: 
   
   =item Red CRITICAL: Shutting down                       
   
   Just prior to exit.
   
   =item Free socket: <shutdownretval>                 
   
   The HUPSMAN sub was called due to a SIGHUP.  all children get killsed, and lond execs itself.
   This is followed by:
   
   =item (Red) CRITICAL: Restarting                         
   
   lond is about to exec itself to restart.
   
   =item (Blue) Updating connections                        
   
   (In response to a USR2).  All the children (except the one for localhost)
   are about to be killed, the hosts tab reread, and Apache reloaded via apachereload.
   
   =item (Blue) UpdateHosts killing child <pid> for ip <ip>   
   
   Due to USR2 as above.
   
   =item (Green) keeping child for ip <ip> (pid = <pid>)    
   
   In response to USR2 as above, the child indicated is not being restarted because
   it's assumed that we'll always need a child for the localhost.
   
   
   =item Going to check on the children                
   
   Parent is about to check on the health of the child processes.
   Note that this is in response to a USR1 sent to the parent lond.
   there may be one or more of the next two messages:
   
   =item <pid> is dead                                 
   
   A child that we have in our child hash as alive has evidently died.
   
   =item  Child <pid> did not respond                   
   
   In the health check the child <pid> did not update/produce a pid_.txt
   file when sent it's USR1 signal.  That process is killed with a 9 signal, as it's
   assumed to be hung in some un-fixable way.
   
   =item Finished checking children                   
    
   Master processs's USR1 processing is cojmplete.
   
   =item (Red) CRITICAL: ------- Starting ------            
   
   (There are more '-'s on either side).  Lond has forked itself off to 
   form a new session and is about to start actual initialization.
   
   =item (Green) Attempting to start child (<client>)       
   
   Started a new child process for <client>.  Client is IO::Socket object
   connected to the child.  This was as a result of a TCP/IP connection from a client.
   
   =item Unable to determine who caller was, getpeername returned nothing
                                                     
   In child process initialization.  either getpeername returned undef or
   a zero sized object was returned.  Processing continues, but in my opinion,
   this should be cause for the child to exit.
   
   =item Unable to determine clientip                  
   
   In child process initialization.  The peer address from getpeername was not defined.
   The client address is stored as "Unavailable" and processing continues.
   
   =item (Yellow) INFO: Connection <ip> <name> connection type = <type>
                                                     
   In child initialization.  A good connectionw as received from <ip>.
   
   =over 2
   
   =item <name> 
   
   is the name of the client from hosts.tab.
   
   =item <type> 
   
   Is the connection type which is either 
   
   =over 2
   
   =item manager 
   
   The connection is from a manager node, not in hosts.tab
   
   =item client  
   
   the connection is from a non-manager in the hosts.tab
   
   =item both
   
   The connection is from a manager in the hosts.tab.
   
   =back
   
   =back
   
   =item (Blue) Certificates not installed -- trying insecure auth
   
   One of the certificate file, key file or
   certificate authority file could not be found for a client attempting
   SSL connection intiation.  COnnection will be attemptied in in-secure mode.
   (this would be a system with an up to date lond that has not gotten a 
   certificate from us).
   
   =item (Green)  Successful local authentication            
   
   A local connection successfully negotiated the encryption key. 
   In this case the IDEA key is in a file (that is hopefully well protected).
   
   =item (Green) Successful ssl authentication with <client>  
   
   The client (<client> is the peer's name in hosts.tab), has successfully
   negotiated an SSL connection with this child process.
   
   =item (Green) Successful insecure authentication with <client>
                                                      
   
   The client has successfully negotiated an  insecure connection withthe child process.
   
   =item (Yellow) Attempted insecure connection disallowed    
   
   The client attempted and failed to successfully negotiate a successful insecure
   connection.  This can happen either because the variable londAllowInsecure is false
   or undefined, or becuse the child did not successfully echo back the challenge
   string.
   
   
   =back
   
   
   =cut
Removed from v.1.394.2.1  
changed lines
  Added in v.1.424

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>