Diff for /loncom/lond between versions 1.489.2.4 and 1.489.2.21

version 1.489.2.4, 2013/04/07 17:42:16 version 1.489.2.21, 2016/08/11 16:37:54
Line 55  use LONCAPA::lonssl; Line 55  use LONCAPA::lonssl;
 use Fcntl qw(:flock);  use Fcntl qw(:flock);
 use Apache::lonnet;  use Apache::lonnet;
 use Mail::Send;  use Mail::Send;
   use Crypt::Eksblowfish::Bcrypt;
   use Digest::SHA;
   use Encode;
   
 my $DEBUG = 0;       # Non zero to enable debug log entries.  my $DEBUG = 0;       # Non zero to enable debug log entries.
   
Line 130  my @passwderrors = ("ok", Line 133  my @passwderrors = ("ok",
    "pwchange_failure - lcpasswd Error filename is invalid");     "pwchange_failure - lcpasswd Error filename is invalid");
   
   
 #  The array below are lcuseradd error strings.:  
   
 my $lastadderror = 13;  
 my @adderrors    = ("ok",  
     "User ID mismatch, lcuseradd must run as user www",  
     "lcuseradd Incorrect number of command line parameters must be 3",  
     "lcuseradd Incorrect number of stdinput lines, must be 3",  
     "lcuseradd Too many other simultaneous pwd changes in progress",  
     "lcuseradd User does not exist",  
     "lcuseradd Unable to make www member of users's group",  
     "lcuseradd Unable to su to root",  
     "lcuseradd Unable to set password",  
     "lcuseradd Username has invalid characters",  
     "lcuseradd Password has an invalid character",  
     "lcuseradd User already exists",  
     "lcuseradd Could not add user.",  
     "lcuseradd Password mismatch");  
   
   
 # This array are the errors from lcinstallfile:  # This array are the errors from lcinstallfile:
   
 my @installerrors = ("ok",  my @installerrors = ("ok",
      "Initial user id of client not that of www",       "Initial user id of client not that of www",
      "Usage error, not enough command line arguments",       "Usage error, not enough command line arguments",
      "Source file name does not exist",       "Source filename does not exist",
      "Destination file name does not exist",       "Destination filename does not exist",
      "Some file operation failed",       "Some file operation failed",
      "Invalid table filename."       "Invalid table filename."
      );       );
Line 640  sub ConfigFileFromSelector { Line 624  sub ConfigFileFromSelector {
 #     String to send to client ("ok" or "refused" if bad file).  #     String to send to client ("ok" or "refused" if bad file).
 #  #
 sub PushFile {  sub PushFile {
     my $request = shift;          my $request = shift;
     my ($command, $filename, $contents) = split(":", $request, 3);      my ($command, $filename, $contents) = split(":", $request, 3);
     &Debug("PushFile");      &Debug("PushFile");
           
Line 670  sub PushFile { Line 654  sub PushFile {
   
     if($filename eq "host") {      if($filename eq "host") {
  $contents = AdjustHostContents($contents);   $contents = AdjustHostContents($contents);
       } elsif ($filename eq 'dns_host' || $filename eq 'dns_domain') {
           if ($contents eq '') {
               &logthis('<font color="red"> Pushfile: unable to install '
                       .$tablefile." - no data received from push. </font>");
               return 'error: push had no data';
           }
           if (&Apache::lonnet::get_host_ip($clientname)) {
               my $clienthost = &Apache::lonnet::hostname($clientname);
               if ($managers{$clientip} eq $clientname) {
                   my $clientprotocol = $Apache::lonnet::protocol{$clientname};
                   $clientprotocol = 'http' if ($clientprotocol ne 'https');
                   my $url = '/adm/'.$filename;
                   $url =~ s{_}{/};
                   my $ua=new LWP::UserAgent;
                   $ua->timeout(60);
                   my $request=new HTTP::Request('GET',"$clientprotocol://$clienthost$url");
                   my $response=$ua->request($request);
                   if ($response->is_error()) {
                       &logthis('<font color="red"> Pushfile: unable to install '
                               .$tablefile." - error attempting to pull data. </font>");
                       return 'error: pull failed';
                   } else {
                       my $result = $response->content;
                       chomp($result);
                       unless ($result eq $contents) {
                           &logthis('<font color="red"> Pushfile: unable to install '
                                   .$tablefile." - pushed data and pulled data differ. </font>");
                           my $pushleng = length($contents);
                           my $pullleng = length($result);
                           if ($pushleng != $pullleng) {
                               return "error: $pushleng vs $pullleng bytes";
                           } else {
                               return "error: mismatch push and pull";
                           }
                       }
                   }
               }
           }
     }      }
   
     #  Install the new file:      #  Install the new file:
Line 1704  sub read_lonnet_global { Line 1726  sub read_lonnet_global {
 sub server_devalidatecache_handler {  sub server_devalidatecache_handler {
     my ($cmd,$tail,$client) = @_;      my ($cmd,$tail,$client) = @_;
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
     my ($name,$id) = map { &unescape($_); } split(/:/,$tail);      my $items = &unescape($tail);
     &Apache::lonnet::devalidate_cache_new($name,$id);      my @cached = split(/\&/,$items);
       foreach my $key (@cached) {
           if ($key =~ /:/) {
               my ($name,$id) = map { &unescape($_); } split(/:/,$key);
               &Apache::lonnet::devalidate_cache_new($name,$id);
           }
       }
     my $result = 'ok';      my $result = 'ok';
     &Reply($client,\$result,$userinput);      &Reply($client,\$result,$userinput);
     return 1;      return 1;
Line 1992  sub change_password_handler { Line 2020  sub change_password_handler {
  my ($howpwd,$contentpwd)=split(/:/,$realpasswd);   my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
  if ($howpwd eq 'internal') {   if ($howpwd eq 'internal') {
     &Debug("internal auth");      &Debug("internal auth");
     my $salt=time;              my $ncpass = &hash_passwd($udom,$npass);
     $salt=substr($salt,6,2);  
     my $ncpass=crypt($npass,$salt);  
     if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) {      if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) {
  my $msg="Result of password change for $uname: pwchange_success";   my $msg="Result of password change for $uname: pwchange_success";
                 if ($lonhost) {                  if ($lonhost) {
                     $msg .= " - request originated from: $lonhost";                      $msg .= " - request originated from: $lonhost";
                 }                  }
                 &logthis($msg);                  &logthis($msg);
                   &update_passwd_history($uname,$udom,$howpwd,$context);
  &Reply($client, "ok\n", $userinput);   &Reply($client, "ok\n", $userinput);
     } else {      } else {
  &logthis("Unable to open $uname passwd "                  &logthis("Unable to open $uname passwd "               
Line 2009  sub change_password_handler { Line 2036  sub change_password_handler {
     }      }
  } elsif ($howpwd eq 'unix' && $context ne 'reset_by_email') {   } elsif ($howpwd eq 'unix' && $context ne 'reset_by_email') {
     my $result = &change_unix_password($uname, $npass);      my $result = &change_unix_password($uname, $npass);
               if ($result eq 'ok') {
                   &update_passwd_history($uname,$udom,$howpwd,$context);
               }
     &logthis("Result of password change for $uname: ".      &logthis("Result of password change for $uname: ".
      $result);       $result);
     &Reply($client, \$result, $userinput);      &Reply($client, \$result, $userinput);
Line 2031  sub change_password_handler { Line 2061  sub change_password_handler {
 }  }
 &register_handler("passwd", \&change_password_handler, 1, 1, 0);  &register_handler("passwd", \&change_password_handler, 1, 1, 0);
   
   sub hash_passwd {
       my ($domain,$plainpass,@rest) = @_;
       my ($salt,$cost);
       if (@rest) {
           $cost = $rest[0];
           # salt is first 22 characters, base-64 encoded by bcrypt
           my $plainsalt = substr($rest[1],0,22);
           $salt = Crypt::Eksblowfish::Bcrypt::de_base64($plainsalt);
       } else {
           my $defaultcost;
           my %domconfig =
               &Apache::lonnet::get_dom('configuration',['password'],$domain);
           if (ref($domconfig{'password'}) eq 'HASH') {
               $defaultcost = $domconfig{'password'}{'cost'};
           }
           if (($defaultcost eq '') || ($defaultcost =~ /D/)) {
               $cost = 10;
           } else {
               $cost = $defaultcost;
           }
           # Generate random 16-octet base64 salt
           $salt = "";
           $salt .= pack("C", int rand(256)) for 1..16;
       }
       my $hash = &Crypt::Eksblowfish::Bcrypt::bcrypt_hash({
           key_nul => 1,
           cost    => $cost,
           salt    => $salt,
       }, Digest::SHA::sha512(Encode::encode('UTF-8',$plainpass)));
   
       my $result = join("!", "", "bcrypt", sprintf("%02d",$cost),
                   &Crypt::Eksblowfish::Bcrypt::en_base64($salt).
                   &Crypt::Eksblowfish::Bcrypt::en_base64($hash));
       return $result;
   }
   
 #  #
 #   Create a new user.  User in this case means a lon-capa user.  #   Create a new user.  User in this case means a lon-capa user.
 #   The user must either already exist in some authentication realm  #   The user must either already exist in some authentication realm
Line 2074  sub add_user_handler { Line 2140  sub add_user_handler {
     ."makeuser";      ."makeuser";
     }      }
     unless ($fperror) {      unless ($fperror) {
  my $result=&make_passwd_file($uname,$udom,$umode,$npass, $passfilename);   my $result=&make_passwd_file($uname,$udom,$umode,$npass,
                                                $passfilename,'makeuser');
  &Reply($client,\$result, $userinput);     #BUGBUG - could be fail   &Reply($client,\$result, $userinput);     #BUGBUG - could be fail
     } else {      } else {
  &Failure($client, \$fperror, $userinput);   &Failure($client, \$fperror, $userinput);
Line 2135  sub change_authentication_handler { Line 2202  sub change_authentication_handler {
  my $passfilename = &password_path($udom, $uname);   my $passfilename = &password_path($udom, $uname);
  if ($passfilename) { # Not allowed to create a new user!!   if ($passfilename) { # Not allowed to create a new user!!
     # If just changing the unix passwd. need to arrange to run      # If just changing the unix passwd. need to arrange to run
     # passwd since otherwise make_passwd_file will run      # passwd since otherwise make_passwd_file will fail as 
     # lcuseradd which fails if an account already exists      # creation of unix authenticated users is no longer supported
     # (to prevent an unscrupulous LONCAPA admin from stealing              # except from the command line, when running make_domain_coordinator.pl
     # an existing account by overwriting it as a LonCAPA account).  
   
     if(($oldauth =~/^unix/) && ($umode eq "unix")) {      if(($oldauth =~/^unix/) && ($umode eq "unix")) {
  my $result = &change_unix_password($uname, $npass);   my $result = &change_unix_password($uname, $npass);
  &logthis("Result of password change for $uname: ".$result);   &logthis("Result of password change for $uname: ".$result);
  if ($result eq "ok") {   if ($result eq "ok") {
                       &update_passwd_history($uname,$udom,$umode,'changeuserauth');
     &Reply($client, \$result);      &Reply($client, \$result);
  } else {   } else {
     &Failure($client, \$result);      &Failure($client, \$result);
  }   }
     } else {      } else {
  my $result=&make_passwd_file($uname,$udom,$umode,$npass,$passfilename);   my $result=&make_passwd_file($uname,$udom,$umode,$npass,
                                                $passfilename,'changeuserauth');
  #   #
  #  If the current auth mode is internal, and the old auth mode was   #  If the current auth mode is internal, and the old auth mode was
  #  unix, or krb*,  and the user is an author for this domain,   #  unix, or krb*,  and the user is an author for this domain,
  #  re-run manage_permissions for that role in order to be able   #  re-run manage_permissions for that role in order to be able
  #  to take ownership of the construction space back to www:www   #  to take ownership of the construction space back to www:www
  #   #
   
   
  if( (($oldauth =~ /^unix/) && ($umode eq "internal")) ||  
     (($oldauth =~ /^internal/) && ($umode eq "unix")) ) {   
     if(&is_author($udom, $uname)) {  
  &Debug(" Need to manage author permissions...");  
  &manage_permissions("/$udom/_au", $udom, $uname, "$umode:");  
     }  
  }  
  &Reply($client, \$result, $userinput);   &Reply($client, \$result, $userinput);
     }      }
                 
Line 2177  sub change_authentication_handler { Line 2238  sub change_authentication_handler {
 }  }
 &register_handler("changeuserauth", \&change_authentication_handler, 1,1, 0);  &register_handler("changeuserauth", \&change_authentication_handler, 1,1, 0);
   
   sub update_passwd_history {
       my ($uname,$udom,$umode,$context) = @_;
       my $proname=&propath($udom,$uname);
       my $now = time;
       if (open(my $fh,">>$proname/passwd.log")) {
           print $fh "$now:$umode:$context\n";
           close($fh);
       }
       return;
   }
   
 #  #
 #   Determines if this is the home server for a user.  The home server  #   Determines if this is the home server for a user.  The home server
 #   for a user will have his/her lon-capa passwd file.  Therefore all we need  #   for a user will have his/her lon-capa passwd file.  Therefore all we need
Line 2428  sub remove_user_file_handler { Line 2500  sub remove_user_file_handler {
     if (-e $file) {      if (-e $file) {
  #   #
  #   If the file is a regular file unlink is fine...   #   If the file is a regular file unlink is fine...
  #   However it's possible the client wants a dir.   #   However it's possible the client wants a dir
  #   removed, in which case rmdir is more approprate:   #   removed, in which case rmdir is more appropriate
           #   Note: rmdir will only remove an empty directory.
  #   #
         if (-f $file){          if (-f $file){
     unlink($file);      unlink($file);
                       # for html files remove the associated .bak file
                       # which may have been created by the editor.
                       if ($ufile =~ m{^((docs|supplemental)/(?:\d+|default)/\d+(?:|/.+)/)[^/]+\.x?html?$}i) {
                           my $path = $1;
                           if (-e $file.'.bak') {
                               unlink($file.'.bak');
                           }
                       }
  } elsif(-d $file) {   } elsif(-d $file) {
     rmdir($file);      rmdir($file);
  }   }
Line 2795  sub newput_user_profile_entry { Line 2876  sub newput_user_profile_entry {
     foreach my $pair (@pairs) {      foreach my $pair (@pairs) {
  my ($key,$value)=split(/=/,$pair);   my ($key,$value)=split(/=/,$pair);
  if (exists($hashref->{$key})) {   if (exists($hashref->{$key})) {
               if (!&untie_user_hash($hashref)) {
                   &logthis("error: ".($!+0)." untie (GDBM) failed ".
                            "while attempting newput - early out as key exists");
               }
     &Failure($client, "key_exists: ".$key."\n",$userinput);      &Failure($client, "key_exists: ".$key."\n",$userinput);
     return 1;      return 1;
  }   }
Line 3298  sub dump_with_regexp { Line 3383  sub dump_with_regexp {
 #                          namespace   - Name of the database being modified  #                          namespace   - Name of the database being modified
 #                          rid         - Resource keyword to modify.  #                          rid         - Resource keyword to modify.
 #                          what        - new value associated with rid.  #                          what        - new value associated with rid.
   #                          laststore   - (optional) version=timestamp
   #                                        for most recent transaction for rid
   #                                        in namespace, when cstore was called
 #  #
 #    $client             - Socket open on the client.  #    $client             - Socket open on the client.
 #  #
Line 3306  sub dump_with_regexp { Line 3394  sub dump_with_regexp {
 #      1 (keep on processing).  #      1 (keep on processing).
 #  Side-Effects:  #  Side-Effects:
 #    Writes to the client  #    Writes to the client
   #    Successful storage will cause either 'ok', or, if $laststore was included
   #    in the tail of the request, and the version number for the last transaction
   #    is larger than the version in $laststore, delay:$numtrans , where $numtrans
   #    is the number of store evevnts recorded for rid in namespace since
   #    lonnet::store() was called by the client.
   #
 sub store_handler {  sub store_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
     
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
   
     my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail);      chomp($tail);
       my ($udom,$uname,$namespace,$rid,$what,$laststore) =split(/:/,$tail);
     if ($namespace ne 'roles') {      if ($namespace ne 'roles') {
   
  chomp($what);  
  my @pairs=split(/\&/,$what);   my @pairs=split(/\&/,$what);
  my $hashref  = &tie_user_hash($udom, $uname, $namespace,   my $hashref  = &tie_user_hash($udom, $uname, $namespace,
        &GDBM_WRCREAT(), "S",         &GDBM_WRCREAT(), "S",
        "$rid:$what");         "$rid:$what");
  if ($hashref) {   if ($hashref) {
     my $now = time;      my $now = time;
     my @previouskeys=split(/&/,$hashref->{"keys:$rid"});              my $numtrans;
     my $key;              if ($laststore) {
                   my ($previousversion,$previoustime) = split(/\=/,$laststore);
                   my ($lastversion,$lasttime) = (0,0);
                   $lastversion = $hashref->{"version:$rid"};
                   if ($lastversion) {
                       $lasttime = $hashref->{"$lastversion:$rid:timestamp"};
                   }
                   if (($previousversion) && ($previousversion !~ /\D/)) {
                       if (($lastversion > $previousversion) && ($lasttime >= $previoustime)) {
                           $numtrans = $lastversion - $previousversion;
                       }
                   } elsif ($lastversion) {
                       $numtrans = $lastversion;
                   }
                   if ($numtrans) {
                       $numtrans =~ s/D//g;
                   }
               }
   
     $hashref->{"version:$rid"}++;      $hashref->{"version:$rid"}++;
     my $version=$hashref->{"version:$rid"};      my $version=$hashref->{"version:$rid"};
     my $allkeys='';       my $allkeys=''; 
Line 3335  sub store_handler { Line 3447  sub store_handler {
     $allkeys.='timestamp';      $allkeys.='timestamp';
     $hashref->{"$version:keys:$rid"}=$allkeys;      $hashref->{"$version:keys:$rid"}=$allkeys;
     if (&untie_user_hash($hashref)) {      if (&untie_user_hash($hashref)) {
  &Reply($client, "ok\n", $userinput);                  my $msg = 'ok';
                   if ($numtrans) {
                       $msg = 'delay:'.$numtrans;
                   }
                   &Reply($client, "$msg\n", $userinput);
     } else {      } else {
  &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".   &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
  "while attempting store\n", $userinput);   "while attempting store\n", $userinput);
Line 3851  sub put_course_id_hash_handler { Line 3967  sub put_course_id_hash_handler {
 #                 creationcontext - include courses created in specified context   #                 creationcontext - include courses created in specified context 
 #  #
 #                 domcloner - flag to indicate if user can create CCs in course's domain.  #                 domcloner - flag to indicate if user can create CCs in course's domain.
 #                             If so, ability to clone course is automatic.   #                             If so, ability to clone course is automatic.
   #                 hasuniquecode - filter by courses for which a six character unique code has
   #                                 been set.
 #  #
 #     $client  - The socket open on the client.  #     $client  - The socket open on the client.
 # Returns:  # Returns:
Line 3865  sub dump_course_id_handler { Line 3983  sub dump_course_id_handler {
     my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter,      my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter,
         $typefilter,$regexp_ok,$rtn_as_hash,$selfenrollonly,$catfilter,$showhidden,          $typefilter,$regexp_ok,$rtn_as_hash,$selfenrollonly,$catfilter,$showhidden,
         $caller,$cloner,$cc_clone_list,$cloneonly,$createdbefore,$createdafter,          $caller,$cloner,$cc_clone_list,$cloneonly,$createdbefore,$createdafter,
         $creationcontext,$domcloner) =split(/:/,$tail);          $creationcontext,$domcloner,$hasuniquecode) =split(/:/,$tail);
     my $now = time;      my $now = time;
     my ($cloneruname,$clonerudom,%cc_clone);      my ($cloneruname,$clonerudom,%cc_clone);
     if (defined($description)) {      if (defined($description)) {
Line 3938  sub dump_course_id_handler { Line 4056  sub dump_course_id_handler {
     } else {      } else {
         $creationcontext = '.';          $creationcontext = '.';
     }      }
       unless ($hasuniquecode) {
           $hasuniquecode = '.';
       }
     my $unpack = 1;      my $unpack = 1;
     if ($description eq '.' && $instcodefilter eq '.' && $ownerfilter eq '.' &&       if ($description eq '.' && $instcodefilter eq '.' && $ownerfilter eq '.' && 
         $typefilter eq '.') {          $typefilter eq '.') {
Line 4026  sub dump_course_id_handler { Line 4147  sub dump_course_id_handler {
                 $selfenroll_end = $items->{'selfenroll_end_date'};                  $selfenroll_end = $items->{'selfenroll_end_date'};
                 $created = $items->{'created'};                  $created = $items->{'created'};
                 $context = $items->{'context'};                  $context = $items->{'context'};
                   if ($hasuniquecode ne '.') {
                       next unless ($items->{'uniquecode'});
                   }
                 if ($selfenrollonly) {                  if ($selfenrollonly) {
                     next if (!$selfenroll_types);                      next if (!$selfenroll_types);
                     if (($selfenroll_end > 0) && ($selfenroll_end <= $now)) {                      if (($selfenroll_end > 0) && ($selfenroll_end <= $now)) {
Line 4448  sub get_id_handler { Line 4572  sub get_id_handler {
 }  }
 &register_handler("idget", \&get_id_handler, 0, 1, 0);  &register_handler("idget", \&get_id_handler, 0, 1, 0);
   
   #   Deletes one or more ids in a domain's id database.
   #
   #   Parameters:
   #       $cmd                  - Command keyword (iddel).
   #       $tail                 - Command tail.  In this case a colon
   #                               separated list containing:
   #                               The domain for which we are deleting the id(s).
   #                               &-separated list of id(s) to delete.
   #       $client               - File open on client socket.
   # Returns:
   #     1   - Continue processing
   #     0   - Exit server.
   #
   #
   
   sub del_id_handler {
       my ($cmd,$tail,$client) = @_;
   
       my $userinput = "$cmd:$tail";
   
       my ($udom,$what)=split(/:/,$tail);
       chomp($what);
       my $hashref = &tie_domain_hash($udom, "ids", &GDBM_WRCREAT(),
                                      "D", $what);
       if ($hashref) {
           my @keys=split(/\&/,$what);
           foreach my $key (@keys) {
               delete($hashref->{$key});
           }
           if (&untie_user_hash($hashref)) {
               &Reply($client, "ok\n", $userinput);
           } else {
               &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ".
                       "while attempting iddel\n", $userinput);
           }
       } else {
           &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ".
                    "while attempting iddel\n", $userinput);
       }
       return 1;
   }
   &register_handler("iddel", \&del_id_handler, 0, 1, 0);
   
 #  #
 # Puts broadcast e-mail sent by Domain Coordinator in nohist_dcmail database   # Puts broadcast e-mail sent by Domain Coordinator in nohist_dcmail database 
 #  #
Line 5183  sub retrieve_auto_file_handler { Line 5350  sub retrieve_auto_file_handler {
     my ($filename)   = split(/:/, $tail);      my ($filename)   = split(/:/, $tail);
   
     my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;      my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename;
     if ( (-e $source) && ($filename ne '') ) {      if ($filename =~m{/\.\./}) {
           &Failure($client, "refused\n", $userinput);
       } elsif ( (-e $source) && ($filename ne '') ) {
  my $reply = '';   my $reply = '';
  if (open(my $fh,$source)) {   if (open(my $fh,$source)) {
     while (<$fh>) {      while (<$fh>) {
Line 5215  sub crsreq_checks_handler { Line 5384  sub crsreq_checks_handler {
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
     my $dom = $tail;      my $dom = $tail;
     my $result;      my $result;
     my @reqtypes = ('official','unofficial','community');      my @reqtypes = ('official','unofficial','community','textbook');
     eval {      eval {
         local($SIG{__DIE__})='DEFAULT';          local($SIG{__DIE__})='DEFAULT';
         my %validations;          my %validations;
Line 5242  sub crsreq_checks_handler { Line 5411  sub crsreq_checks_handler {
 sub validate_crsreq_handler {  sub validate_crsreq_handler {
     my ($cmd, $tail, $client) = @_;      my ($cmd, $tail, $client) = @_;
     my $userinput = "$cmd:$tail";      my $userinput = "$cmd:$tail";
     my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist) = split(/:/, $tail);      my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist,$customdata) = split(/:/, $tail);
     $instcode = &unescape($instcode);      $instcode = &unescape($instcode);
     $owner = &unescape($owner);      $owner = &unescape($owner);
     $crstype = &unescape($crstype);      $crstype = &unescape($crstype);
     $inststatuslist = &unescape($inststatuslist);      $inststatuslist = &unescape($inststatuslist);
     $instcode = &unescape($instcode);      $instcode = &unescape($instcode);
     $instseclist = &unescape($instseclist);      $instseclist = &unescape($instseclist);
       my $custominfo = &Apache::lonnet::thaw_unescape($customdata);
     my $outcome;      my $outcome;
     eval {      eval {
         local($SIG{__DIE__})='DEFAULT';          local($SIG{__DIE__})='DEFAULT';
         $outcome = &localenroll::validate_crsreq($dom,$owner,$crstype,          $outcome = &localenroll::validate_crsreq($dom,$owner,$crstype,
                                                  $inststatuslist,$instcode,                                                   $inststatuslist,$instcode,
                                                  $instseclist);                                                   $instseclist,$custominfo);
     };      };
     if (!$@) {      if (!$@) {
         &Reply($client, \$outcome, $userinput);          &Reply($client, \$outcome, $userinput);
Line 5265  sub validate_crsreq_handler { Line 5435  sub validate_crsreq_handler {
 }  }
 &register_handler("autocrsreqvalidation", \&validate_crsreq_handler, 0, 1, 0);  &register_handler("autocrsreqvalidation", \&validate_crsreq_handler, 0, 1, 0);
   
   sub crsreq_update_handler {
       my ($cmd, $tail, $client) = @_;
       my $userinput = "$cmd:$tail";
       my ($cdom,$cnum,$crstype,$action,$ownername,$ownerdomain,$fullname,$title,$code,
           $accessstart,$accessend,$infohashref) =
           split(/:/, $tail);
       $crstype = &unescape($crstype);
       $action = &unescape($action);
       $ownername = &unescape($ownername);
       $ownerdomain = &unescape($ownerdomain);
       $fullname = &unescape($fullname);
       $title = &unescape($title);
       $code = &unescape($code);
       $accessstart = &unescape($accessstart);
       $accessend = &unescape($accessend);
       my $incoming = &Apache::lonnet::thaw_unescape($infohashref);
       my ($result,$outcome);
       eval {
           local($SIG{__DIE__})='DEFAULT';
           my %rtnhash;
           $outcome = &localenroll::crsreq_updates($cdom,$cnum,$crstype,$action,
                                                   $ownername,$ownerdomain,$fullname,
                                                   $title,$code,$accessstart,$accessend,
                                                   $incoming,\%rtnhash);
           if ($outcome eq 'ok') {
               my @posskeys = qw(createdweb createdmsg createdcustomized createdactions queuedweb queuedmsg formitems reviewweb validationjs onload javascript);
               foreach my $key (keys(%rtnhash)) {
                   if (grep(/^\Q$key\E/,@posskeys)) {
                       $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&';
                   }
               }
               $result =~ s/\&$//;
           }
       };
       if (!$@) {
           if ($outcome eq 'ok') {
               &Reply($client, \$result, $userinput);
           } else {
               &Reply($client, "format_error\n", $userinput);
           }
       } else {
           &Failure($client,"unknown_cmd\n",$userinput);
       }
       return 1;
   }
   &register_handler("autocrsrequpdate", \&crsreq_update_handler, 0, 1, 0);
   
 #  #
 #   Read and retrieve institutional code format (for support form).  #   Read and retrieve institutional code format (for support form).
 # Formal Parameters:  # Formal Parameters:
Line 5972  sub lcpasswdstrerror { Line 6189  sub lcpasswdstrerror {
     }      }
 }  }
   
 #  
 # Convert an error return code from lcuseradd to a string value:  
 #  
 sub lcuseraddstrerror {  
     my $ErrorCode = shift;  
     if(($ErrorCode < 0) || ($ErrorCode > $lastadderror)) {  
  return "lcuseradd - Unrecognized error code: ".$ErrorCode;  
     } else {  
  return $adderrors[$ErrorCode];  
     }  
 }  
   
 # grabs exception and records it to log before exiting  # grabs exception and records it to log before exiting
 sub catchexception {  sub catchexception {
     my ($error)=@_;      my ($error)=@_;
Line 6469  sub make_new_child { Line 6674  sub make_new_child {
 #        my $tmpsnum=0;            # Now global  #        my $tmpsnum=0;            # Now global
 #---------------------------------------------------- kerberos 5 initialization  #---------------------------------------------------- kerberos 5 initialization
         &Authen::Krb5::init_context();          &Authen::Krb5::init_context();
  unless (($dist eq 'fedora5') || ($dist eq 'fedora4') ||    
  ($dist eq 'fedora6') || ($dist eq 'suse9.3') ||          my $no_ets;
                 ($dist eq 'suse12.2') || ($dist eq 'suse12.3')) {          if ($dist =~ /^(?:centos|rhes|scientific)(\d+)$/) {
     &Authen::Krb5::init_ets();              if ($1 >= 7) {
  }                  $no_ets = 1;
               }
           } elsif ($dist =~ /^suse(\d+\.\d+)$/) {
               if (($1 eq '9.3') || ($1 >= 12.2)) {
                   $no_ets = 1;
               }
           } elsif ($dist =~ /^sles(\d+)$/) {
               if ($1 > 11) {
                   $no_ets = 1;
               }
           } elsif ($dist =~ /^fedora(\d+)$/) {
               if ($1 < 7) {
                   $no_ets = 1;
               }
           }
           unless ($no_ets) {
               &Authen::Krb5::init_ets();
           }
   
  &status('Accepted connection');   &status('Accepted connection');
 # =============================================================================  # =============================================================================
Line 6856  sub validate_user { Line 7078  sub validate_user {
     }       } 
     if ($howpwd ne 'nouser') {      if ($howpwd ne 'nouser') {
  if($howpwd eq "internal") { # Encrypted is in local password file.   if($howpwd eq "internal") { # Encrypted is in local password file.
     $validated = (crypt($password, $contentpwd) eq $contentpwd);              if (length($contentpwd) == 13) {
                   $validated = (crypt($password,$contentpwd) eq $contentpwd);
                   if ($validated) {
                       my $ncpass = &hash_passwd($domain,$password);
                       if (&rewrite_password_file($domain,$user,"$howpwd:$ncpass")) {
                           &update_passwd_history($user,$domain,$howpwd,'conversion');
                           &logthis("Validated password hashed with bcrypt for $user:$domain");
                       }
                   }
               } else {
                   $validated = &check_internal_passwd($password,$contentpwd,$domain);
               }
  }   }
  elsif ($howpwd eq "unix") { # User is a normal unix user.   elsif ($howpwd eq "unix") { # User is a normal unix user.
     $contentpwd = (getpwnam($user))[1];      $contentpwd = (getpwnam($user))[1];
Line 6924  sub validate_user { Line 7157  sub validate_user {
     return $validated;      return $validated;
 }  }
   
   sub check_internal_passwd {
       my ($plainpass,$stored,$domain) = @_;
       my (undef,$method,@rest) = split(/!/,$stored);
       if ($method eq "bcrypt") {
           my $result = &hash_passwd($domain,$plainpass,@rest);
           if ($result ne $stored) {
               return 0;
           }
           # Upgrade to a larger number of rounds if necessary
           my $defaultcost;
           my %domconfig =
               &Apache::lonnet::get_dom('configuration',['password'],$domain);
           if (ref($domconfig{'password'}) eq 'HASH') {
               $defaultcost = $domconfig{'password'}{'cost'};
           }
           if (($defaultcost eq '') || ($defaultcost =~ /D/)) {
               $defaultcost = 10;
           }
           return 1 unless($rest[0]<$defaultcost);
       }
       return 0;
   }
   
   sub get_last_authchg {
       my ($domain,$user) = @_;
       my $lastmod;
       my $logname = &propath($domain,$user).'/passwd.log';
       if (-e "$logname") {
           $lastmod = (stat("$logname"))[9];
       }
       return $lastmod;
   }
   
 sub krb4_authen {  sub krb4_authen {
     my ($password,$null,$user,$contentpwd) = @_;      my ($password,$null,$user,$contentpwd) = @_;
     my $validated = 0;      my $validated = 0;
Line 7239  sub change_unix_password { Line 7505  sub change_unix_password {
   
   
 sub make_passwd_file {  sub make_passwd_file {
     my ($uname,$udom,$umode,$npass,$passfilename)=@_;      my ($uname,$udom,$umode,$npass,$passfilename,$action)=@_;
     my $result="ok";      my $result="ok";
     if ($umode eq 'krb4' or $umode eq 'krb5') {      if ($umode eq 'krb4' or $umode eq 'krb5') {
  {   {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     if ($pf) {      if ($pf) {
  print $pf "$umode:$npass\n";   print $pf "$umode:$npass\n";
                   &update_passwd_history($uname,$udom,$umode,$action);
     } else {      } else {
  $result = "pass_file_failed_error";   $result = "pass_file_failed_error";
     }      }
  }   }
     } elsif ($umode eq 'internal') {      } elsif ($umode eq 'internal') {
  my $salt=time;          my $ncpass = &hash_passwd($udom,$npass);
  $salt=substr($salt,6,2);  
  my $ncpass=crypt($npass,$salt);  
  {   {
     &Debug("Creating internal auth");      &Debug("Creating internal auth");
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     if($pf) {      if($pf) {
  print $pf "internal:$ncpass\n";    print $pf "internal:$ncpass\n"; 
                   &update_passwd_history($uname,$udom,$umode,$action);
     } else {      } else {
  $result = "pass_file_failed_error";   $result = "pass_file_failed_error";
     }      }
Line 7268  sub make_passwd_file { Line 7534  sub make_passwd_file {
     my $pf = IO::File->new(">$passfilename");      my $pf = IO::File->new(">$passfilename");
     if($pf) {      if($pf) {
  print $pf "localauth:$npass\n";   print $pf "localauth:$npass\n";
                   &update_passwd_history($uname,$udom,$umode,$action);
     } else {      } else {
  $result = "pass_file_failed_error";   $result = "pass_file_failed_error";
     }      }
  }   }
     } elsif ($umode eq 'unix') {      } elsif ($umode eq 'unix') {
  {   &logthis(">>>Attempt to create unix account blocked -- unix auth not available for new users.");
     #   $result="no_new_unix_accounts";
     #  Don't allow the creation of privileged accounts!!! that would  
     #  be real bad!!!  
     #  
     my $uid = getpwnam($uname);  
     if((defined $uid) && ($uid == 0)) {  
  &logthis(">>>Attempt to create privileged account blocked");  
  return "no_priv_account_error\n";  
     }  
   
     my $execpath       ="$perlvar{'lonDaemons'}/"."lcuseradd";  
   
     my $lc_error_file  = $execdir."/tmp/lcuseradd".$$.".status";  
     {  
  &Debug("Executing external: ".$execpath);  
  &Debug("user  = ".$uname.", Password =". $npass);  
  my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log");  
  print $se "$uname\n";  
                 print $se "$udom\n";  
  print $se "$npass\n";  
  print $se "$npass\n";  
  print $se "$lc_error_file\n"; # Status -> unique file.  
     }  
     if (-r $lc_error_file) {  
  &Debug("Opening error file: $lc_error_file");  
  my $error = IO::File->new("< $lc_error_file");  
  my $useraddok = <$error>;  
  $error->close;  
  unlink($lc_error_file);  
   
  chomp $useraddok;  
   
  if($useraddok > 0) {  
     my $error_text = &lcuseraddstrerror($useraddok);  
     &logthis("Failed lcuseradd: $error_text");  
     $result = "lcuseradd_failed:$error_text";  
  }  else {  
     my $pf = IO::File->new(">$passfilename");  
     if($pf) {  
  print $pf "unix:\n";  
     } else {  
  $result = "pass_file_failed_error";  
     }  
  }  
     }  else {  
  &Debug("Could not locate lcuseradd error: $lc_error_file");  
  $result="bug_lcuseradd_no_output_file";  
     }  
  }  
     } elsif ($umode eq 'none') {      } elsif ($umode eq 'none') {
  {   {
     my $pf = IO::File->new("> $passfilename");      my $pf = IO::File->new("> $passfilename");

Removed from v.1.489.2.4  
changed lines
  Added in v.1.489.2.21


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>