--- loncom/lond 2002/09/03 02:02:50 1.90.2.1
+++ loncom/lond 2003/01/15 19:34:02 1.107
@@ -2,7 +2,7 @@
# The LearningOnline Network
# lond "LON Daemon" Server (port "LOND" 5663)
#
-# $Id: lond,v 1.90.2.1 2002/09/03 02:02:50 albertel Exp $
+# $Id: lond,v 1.107 2003/01/15 19:34:02 matthew Exp $
#
# Copyright Michigan State University Board of Trustees
#
@@ -54,13 +54,13 @@
# 02/19 Matthew Hall
# 02/25 Gerd Kortemeyer
# 05/11 Scott Harrison
+# 01/xx/2003 Ron Fox.. Remove preforking. This makes the general daemon
+# logic simpler (and there were problems maintaining the preforked
+# population). Since the time averaged connection rate is close to zero
+# because lonc's purpose is to maintain near continuous connnections,
+# preforking is not really needed.
###
-# based on "Perl Cookbook" ISBN 1-56592-243-3
-# preforker - server who forks first
-# runs as a daemon
-# HUPs
-# uses IDEA encryption
use lib '/home/httpd/lib/perl/';
use LONCAPA::Configuration;
@@ -74,6 +74,7 @@ use Crypt::IDEA;
use LWP::UserAgent();
use GDBM_File;
use Authen::Krb4;
+use Authen::Krb5;
use lib '/home/httpd/lib/perl/';
use localauth;
@@ -82,6 +83,68 @@ my $DEBUG = 0; # Non zero to ena
my $status='';
my $lastlog='';
+#
+# The array below are password error strings."
+#
+my $lastpwderror = 13; # Largest error number from lcpasswd.
+my @passwderrors = ("ok",
+ "lcpasswd must be run as user 'www'",
+ "lcpasswd got incorrect number of arguments",
+ "lcpasswd did not get the right nubmer of input text lines",
+ "lcpasswd too many simultaneous pwd changes in progress",
+ "lcpasswd User does not exist.",
+ "lcpasswd Incorrect current passwd",
+ "lcpasswd Unable to su to root.",
+ "lcpasswd Cannot set new passwd.",
+ "lcpasswd Username has invalid characters",
+ "lcpasswd Invalid characters in password",
+ "11", "12",
+ "lcpasswd Password mismatch");
+
+
+# The array below are lcuseradd error strings.:
+
+my $lastadderror = 13;
+my @adderrors = ("ok",
+ "User ID mismatch, lcuseradd must run as user www",
+ "lcuseradd Incorrect number of command line parameters must be 3",
+ "lcuseradd Incorrect number of stdinput lines, must be 3",
+ "lcuseradd Too many other simultaneous pwd changes in progress",
+ "lcuseradd User does not exist",
+ "lcuseradd Unabel to mak ewww member of users's group",
+ "lcuseradd Unable to su to root",
+ "lcuseradd Unable to set password",
+ "lcuseradd Usrname has invbalid charcters",
+ "lcuseradd Password has an invalid character",
+ "lcuseradd User already exists",
+ "lcuseradd Could not add user.",
+ "lcuseradd Password mismatch");
+
+
+#
+# Convert an error return code from lcpasswd to a string value.
+#
+sub lcpasswdstrerror {
+ my $ErrorCode = shift;
+ if(($ErrorCode < 0) || ($ErrorCode > $lastpwderror)) {
+ return "lcpasswd Unrecognized error return value ".$ErrorCode;
+ } else {
+ return $passwderrors[$ErrorCode];
+ }
+}
+
+#
+# Convert an error return code from lcuseradd to a string value:
+#
+sub lcuseraddstrerror {
+ my $ErrorCode = shift;
+ if(($ErrorCode < 0) || ($ErrorCode > $lastadderror)) {
+ return "lcuseradd - Unrecognized error code: ".$ErrorCode;
+ } else {
+ return $adderrors[$ErrorCode];
+ }
+}
+
# grabs exception and records it to log before exiting
sub catchexception {
my ($error)=@_;
@@ -106,9 +169,8 @@ $SIG{'QUIT'}=\&catchexception;
$SIG{__DIE__}=\&catchexception;
# ---------------------------------- Read loncapa_apache.conf and loncapa.conf
-&status("Read loncapa_apache.conf and loncapa.conf");
-my $perlvarref=LONCAPA::Configuration::read_conf('loncapa_apache.conf',
- 'loncapa.conf');
+&status("Read loncapa.conf and loncapa_apache.conf");
+my $perlvarref=LONCAPA::Configuration::read_conf('loncapa.conf');
my %perlvar=%{$perlvarref};
undef $perlvarref;
@@ -278,6 +340,7 @@ sub status {
my $now=time;
my $local=localtime($now);
$status=$local.': '.$what;
+ $0='lond: '.$what.' '.$local;
}
# -------------------------------------------------------- Escape Special Chars
@@ -428,37 +491,35 @@ close(PIDSAVE);
&logthis("CRITICAL: ---------- Starting ----------");
&status('Starting');
-# ------------------------------------------------------- Now we are on our own
-
-# Fork off our children.
-for (1 .. $PREFORK) {
- make_new_child();
-}
+
# ----------------------------------------------------- Install signal handlers
-&status('Forked children');
$SIG{CHLD} = \&REAPER;
$SIG{INT} = $SIG{TERM} = \&HUNTSMAN;
$SIG{HUP} = \&HUPSMAN;
$SIG{USR1} = \&checkchildren;
-# And maintain the population.
+
+
+# --------------------------------------------------------------
+# Accept connections. When a connection comes in, it is validated
+# and if good, a child process is created to process transactions
+# along the connection.
+
while (1) {
- &status('Sleeping');
- sleep; # wait for a signal (i.e., child's death)
- &logthis('Woke up');
- &status('Woke up');
- for ($i = $children; $i < $PREFORK; $i++) {
- make_new_child(); # top up the child pool
- }
+ $client = $server->accept() or next;
+ make_new_child($client);
}
sub make_new_child {
+ my $client;
my $pid;
my $cipher;
my $sigset;
+
+ $client = shift;
&logthis("Attempting to start child");
# block signal for fork
$sigset = POSIX::SigSet->new(SIGINT);
@@ -488,11 +549,10 @@ sub make_new_child {
or die "Can't unblock SIGINT for fork: $!\n";
$tmpsnum=0;
-
- # handle connections until we've reached $MAX_CLIENTS_PER_CHILD
- for ($i=0; $i < $MAX_CLIENTS_PER_CHILD; $i++) {
- &status('Idle, waiting for connection');
- $client = $server->accept() or last;
+#---------------------------------------------------- kerberos 5 initialization
+ &Authen::Krb5::init_context();
+ &Authen::Krb5::init_ets();
+
&status('Accepted connection');
# =============================================================================
# do something with the connection
@@ -500,7 +560,7 @@ sub make_new_child {
$client->sockopt(SO_KEEPALIVE, 1);# Enable monitoring of
# connection liveness.
# see if we know client and check for spoof IP by challenge
- my $caller=getpeername($client);
+ my $caller = getpeername($client);
my ($port,$iaddr)=unpack_sockaddr_in($caller);
my $clientip=inet_ntoa($iaddr);
my $clientrec=($hostid{$clientip} ne undef);
@@ -630,15 +690,22 @@ sub make_new_child {
my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
my $pwdcorrect=0;
if ($howpwd eq 'internal') {
+ &Debug("Internal auth");
$pwdcorrect=
(crypt($upass,$contentpwd) eq $contentpwd);
} elsif ($howpwd eq 'unix') {
- $contentpwd=(getpwnam($uname))[1];
- my $pwauth_path="/usr/local/sbin/pwauth";
- unless ($contentpwd eq 'x') {
- $pwdcorrect=
- (crypt($upass,$contentpwd) eq $contentpwd);
- }
+ &Debug("Unix auth");
+ if((getpwnam($uname))[1] eq "") { #no such user!
+ $pwdcorrect = 0;
+ } else {
+ $contentpwd=(getpwnam($uname))[1];
+ my $pwauth_path="/usr/local/sbin/pwauth";
+ unless ($contentpwd eq 'x') {
+ $pwdcorrect=
+ (crypt($upass,$contentpwd) eq
+ $contentpwd);
+ }
+
elsif (-e $pwauth_path) {
open PWAUTH, "|$pwauth_path" or
die "Cannot invoke authentication";
@@ -646,14 +713,41 @@ sub make_new_child {
close PWAUTH;
$pwdcorrect=!$?;
}
+ }
} elsif ($howpwd eq 'krb4') {
- $null=pack("C",0);
- unless ($upass=~/$null/) {
- $pwdcorrect=(
- Authen::Krb4::get_pw_in_tkt($uname,"",
- $contentpwd,'krbtgt',$contentpwd,1,
- $upass) == 0);
- } else { $pwdcorrect=0; }
+ $null=pack("C",0);
+ unless ($upass=~/$null/) {
+ my $krb4_error = &Authen::Krb4::get_pw_in_tkt
+ ($uname,"",$contentpwd,'krbtgt',
+ $contentpwd,1,$upass);
+ if (!$krb4_error) {
+ $pwdcorrect = 1;
+ } else {
+ $pwdcorrect=0;
+ # log error if it is not a bad password
+ if ($krb4_error != 62) {
+ &logthis('krb4:'.$uname.','.$contentpwd.','.
+ &Authen::Krb4::get_err_txt($Authen::Krb4::error));
+ }
+ }
+ }
+ } elsif ($howpwd eq 'krb5') {
+ $null=pack("C",0);
+ unless ($upass=~/$null/) {
+ my $krbclient=&Authen::Krb5::parse_name($uname.'@'.$contentpwd);
+ my $krbservice="krbtgt/".$contentpwd."\@".$contentpwd;
+ my $krbserver=&Authen::Krb5::parse_name($krbservice);
+ my $credentials=&Authen::Krb5::cc_default();
+ $credentials->initialize($krbclient);
+ my $krbreturn =
+ &Authen::Krb5::get_in_tkt_with_password(
+ $krbclient,$krbserver,$upass,$credentials);
+# unless ($krbreturn) {
+# &logthis("Krb5 Error: ".
+# &Authen::Krb5::error());
+# }
+ $pwdcorrect = ($krbreturn == 1);
+ } else { $pwdcorrect=0; }
} elsif ($howpwd eq 'localauth') {
$pwdcorrect=&localauth::localauth($uname,$upass,
$contentpwd);
@@ -677,7 +771,7 @@ sub make_new_child {
chomp($npass);
$upass=&unescape($upass);
$npass=&unescape($npass);
- &logthis("Trying to change password for $uname");
+ &Debug("Trying to change password for $uname");
my $proname=propath($udom,$uname);
my $passfilename="$proname/passwd";
if (-e $passfilename) {
@@ -687,6 +781,7 @@ sub make_new_child {
chomp($realpasswd);
my ($howpwd,$contentpwd)=split(/:/,$realpasswd);
if ($howpwd eq 'internal') {
+ &Debug("internal auth");
if (crypt($upass,$contentpwd) eq $contentpwd) {
my $salt=time;
$salt=substr($salt,6,2);
@@ -703,6 +798,7 @@ sub make_new_child {
# one way or another.
# First: Make sure the current password is
# correct
+ &Debug("auth is unix");
$contentpwd=(getpwnam($uname))[1];
my $pwdcorrect = "0";
my $pwauth_path="/usr/local/sbin/pwauth";
@@ -714,16 +810,20 @@ sub make_new_child {
die "Cannot invoke authentication";
print PWAUTH "$uname\n$upass\n";
close PWAUTH;
- $pwdcorrect=!$?;
+ &Debug("exited pwauth with $? ($uname,$upass) ");
+ $pwdcorrect=($? == 0);
}
if ($pwdcorrect) {
my $execdir=$perlvar{'lonDaemons'};
- my $pf = IO::File->new("|$execdir/lcpasswd");
+ &Debug("Opening lcpasswd pipeline");
+ my $pf = IO::File->new("|$execdir/lcpasswd > /home/www/lcpasswd.log");
print $pf "$uname\n$npass\n$npass\n";
close $pf;
- my $result = ($?>0 ? 'pwchange_failure'
+ my $err = $?;
+ my $result = ($err>0 ? 'pwchange_failure'
: 'ok');
- &logthis("Result of password change for $uname: $result");
+ &logthis("Result of password change for $uname: ".
+ &lcpasswdstrerror($?));
print $client "$result\n";
} else {
print $client "non_authorized\n";
@@ -739,7 +839,7 @@ sub make_new_child {
}
# -------------------------------------------------------------------- makeuser
} elsif ($userinput =~ /^makeuser/) {
- Debug("Make user received");
+ &Debug("Make user received");
my $oldumask=umask(0077);
if ($wasenc==1) {
my
@@ -769,53 +869,9 @@ sub make_new_child {
}
}
unless ($fperror) {
- if ($umode eq 'krb4') {
- {
- my $pf = IO::File->new(">$passfilename");
- print $pf "krb4:$npass\n";
- }
- print $client "ok\n";
- } elsif ($umode eq 'internal') {
- my $salt=time;
- $salt=substr($salt,6,2);
- my $ncpass=crypt($npass,$salt);
- {
- &Debug("Creating internal auth");
- my $pf = IO::File->new(">$passfilename");
- print $pf "internal:$ncpass\n";
- }
- print $client "ok\n";
- } elsif ($umode eq 'localauth') {
- {
- my $pf = IO::File->new(">$passfilename");
- print $pf "localauth:$npass\n";
- }
- print $client "ok\n";
- } elsif ($umode eq 'unix') {
- {
- my $execpath="$perlvar{'lonDaemons'}/".
- "lcuseradd";
- {
- &Debug("Executing external: ".
- $execpath);
- my $se = IO::File->new("|$execpath");
- print $se "$uname\n";
- print $se "$npass\n";
- print $se "$npass\n";
- }
- my $pf = IO::File->new(">$passfilename");
- print $pf "unix:\n";
- }
- print $client "ok\n";
- } elsif ($umode eq 'none') {
- {
- my $pf = IO::File->new(">$passfilename");
- print $pf "none:\n";
- }
- print $client "ok\n";
- } else {
- print $client "auth_mode_error\n";
- }
+ my $result=&make_passwd_file($uname, $umode,$npass,
+ $passfilename);
+ print $client $result;
} else {
print $client "$fperror\n";
}
@@ -829,60 +885,19 @@ sub make_new_child {
&Debug("Changing authorization");
if ($wasenc==1) {
my
- ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput);
+ ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput);
chomp($npass);
&Debug("cmd = ".$cmd." domain= ".$udom.
"uname =".$uname." umode= ".$umode);
$npass=&unescape($npass);
- my $proname=propath($udom,$uname);
+ my $proname=&propath($udom,$uname);
my $passfilename="$proname/passwd";
if ($udom ne $perlvar{'lonDefDomain'}) {
print $client "not_right_domain\n";
} else {
- if ($umode eq 'krb4') {
- {
- my $pf = IO::File->new(">$passfilename");
- print $pf "krb4:$npass\n";
- }
- print $client "ok\n";
- } elsif ($umode eq 'internal') {
- my $salt=time;
- $salt=substr($salt,6,2);
- my $ncpass=crypt($npass,$salt);
- {
- my $pf = IO::File->new(">$passfilename");
- print $pf "internal:$ncpass\n";
- }
- print $client "ok\n";
- } elsif ($umode eq 'localauth') {
- {
- my $pf = IO::File->new(">$passfilename");
- print $pf "localauth:$npass\n";
- }
- print $client "ok\n";
- } elsif ($umode eq 'unix') {
- {
- my $execpath="$perlvar{'lonDaemons'}/".
- "lcuseradd";
- {
- my $se = IO::File->new("|$execpath");
- print $se "$uname\n";
- print $se "$npass\n";
- print $se "$npass\n";
- }
- my $pf = IO::File->new(">$passfilename");
- print $pf "unix:\n";
- }
- print $client "ok\n";
- } elsif ($umode eq 'none') {
- {
- my $pf = IO::File->new(">$passfilename");
- print $pf "none:\n";
- }
- print $client "ok\n";
- } else {
- print $client "auth_mode_error\n";
- }
+ my $result=&make_passwd_file($uname, $umode,$npass,
+ $passfilename);
+ print $client $result;
}
} else {
print $client "refused\n";
@@ -1004,6 +1019,10 @@ sub make_new_child {
# ------------------------------------------------------------------- subscribe
} elsif ($userinput =~ /^sub/) {
print $client &subscribe($userinput,$clientip);
+# ------------------------------------------------------------- current version
+ } elsif ($userinput =~ /^currentversion/) {
+ my ($cmd,$fname)=split(/:/,$userinput);
+ print $client ¤tversion($fname)."\n";
# ------------------------------------------------------------------------- log
} elsif ($userinput =~ /^log/) {
my ($cmd,$udom,$uname,$what)=split(/:/,$userinput);
@@ -1202,6 +1221,47 @@ sub make_new_child {
} else {
print $client "error:$!\n";
}
+# ----------------------------------------------------------------- dumpcurrent
+ } elsif ($userinput =~ /^currentdump/) {
+ my ($cmd,$udom,$uname,$namespace)
+ =split(/:/,$userinput);
+ $namespace=~s/\//\_/g;
+ $namespace=~s/\W//g;
+ my $qresult='';
+ my $proname=propath($udom,$uname);
+ if (tie(%hash,'GDBM_File',
+ "$proname/$namespace.db",
+ &GDBM_READER(),0640)) {
+ # Structure of %data:
+ # $data{$symb}->{$parameter}=$value;
+ # $data{$symb}->{'v.'.$parameter}=$version;
+ # since $parameter will be unescaped, we do not
+ # have to worry about silly parameter names...
+ my %data = ();
+ while (my ($key,$value) = each(%hash)) {
+ my ($v,$symb,$param) = split(/:/,$key);
+ next if ($v eq 'version' || $symb eq 'keys');
+ next if (exists($data{$symb}) &&
+ exists($data{$symb}->{$param}) &&
+ $data{$symb}->{'v.'.$param} > $v);
+ $data{$symb}->{$param}=$value;
+ $data{$symb}->{'v.'.$param}=$v;
+ }
+ if (untie(%hash)) {
+ while (my ($symb,$param_hash) = each(%data)) {
+ while(my ($param,$value) = each (%$param_hash)){
+ next if ($param =~ /^v\./);
+ $qresult.=$symb.':'.$param.'='.$value.'&';
+ }
+ }
+ chop($qresult);
+ print $client "$qresult\n";
+ } else {
+ print $client "error:$!\n";
+ }
+ } else {
+ print $client "error:$!\n";
+ }
# ------------------------------------------------------------------------ dump
} elsif ($userinput =~ /^dump/) {
my ($cmd,$udom,$uname,$namespace,$regexp)
@@ -1213,21 +1273,25 @@ sub make_new_child {
} else {
$regexp='.';
}
- my $proname=propath($udom,$uname);
my $qresult='';
- if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER,0640)) {
+ my $proname=propath($udom,$uname);
+ if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) {
study($regexp);
- foreach $key (keys %hash) {
- my $unescapeKey = &unescape($key);
- if (eval('$unescapeKey=~/$regexp/')) {
- $qresult.="$key=$hash{$key}&";
- }
+ while (($key,$value) = each(%hash)) {
+ if ($regexp eq '.') {
+ $qresult.=$key.'='.$value.'&';
+ } else {
+ my $unescapeKey = &unescape($key);
+ if (eval('$unescapeKey=~/$regexp/')) {
+ $qresult.="$key=$value&";
+ }
+ }
}
- if (untie(%hash)) {
- $qresult=~s/\&$//;
- print $client "$qresult\n";
+ if (untie(%hash)) {
+ chop($qresult);
+ print $client "$qresult\n";
} else {
- print $client "error:$!\n";
+ print $client "error:$!\n";
}
} else {
print $client "error:$!\n";
@@ -1475,21 +1539,19 @@ sub make_new_child {
&logthis("WARNING: "
."Rejected client $clientip, closing connection");
}
- }
+ }
# =============================================================================
&logthis("CRITICAL: "
."Disconnect from $clientip ($hostid{$clientip})");
- # tidy up gracefully and finish
-
- $server->close();
+
# this exit is VERY important, otherwise the child will become
# a producer of more and more children, forking yourself into
# process death.
exit;
- }
+
}
@@ -1541,7 +1603,7 @@ sub GetAuthType
my ($authtype, $contentpwd) = split(/:/, $realpassword);
Debug("Authtype = $authtype, content = $contentpwd\n");
my $availinfo = '';
- if($authtype eq 'krb4') {
+ if($authtype eq 'krb4' or $authtype eq 'krb5') {
$availinfo = $contentpwd;
}
@@ -1632,12 +1694,68 @@ sub unsub {
return $result;
}
+sub currentversion {
+ my $fname=shift;
+ my $version=-1;
+ my $ulsdir='';
+ if ($fname=~/^(.+)\/[^\/]+$/) {
+ $ulsdir=$1;
+ }
+ $fname=~s/\.\d+\.(\w+(?:\.meta)*)$/\.$1/;
+ $fname=~s/\.(\w+(?:\.meta)*)$/\.\(\\d\+\)\.$1\$/;
+
+ if (-e $fname) { $version=1; }
+ if (-e $ulsdir) {
+ if(-d $ulsdir) {
+ if (opendir(LSDIR,$ulsdir)) {
+ while ($ulsfn=readdir(LSDIR)) {
+# see if this is a regular file (ignore links produced earlier)
+ my $thisfile=$ulsdir.'/'.$ulsfn;
+ unless (-l $thisfile) {
+ if ($thisfile=~/$fname/) {
+ if ($1>$version) { $version=$1; }
+ }
+ }
+ }
+ closedir(LSDIR);
+ $version++;
+ }
+ }
+ }
+ return $version;
+}
+
+sub thisversion {
+ my $fname=shift;
+ my $version=-1;
+ if ($fname=~/\.(\d+)\.\w+(?:\.meta)*$/) {
+ $version=$1;
+ }
+ return $version;
+}
+
sub subscribe {
my ($userinput,$clientip)=@_;
my $result;
my ($cmd,$fname)=split(/:/,$userinput);
my $ownership=&ishome($fname);
if ($ownership eq 'owner') {
+# explitly asking for the current version?
+ unless (-e $fname) {
+ my $currentversion=¤tversion($fname);
+ if (&thisversion($fname)==$currentversion) {
+ if ($fname=~/^(.+)\.\d+\.(\w+(?:\.meta)*)$/) {
+ my $root=$1;
+ my $extension=$2;
+ symlink($root.'.'.$extension,
+ $root.'.'.$currentversion.'.'.$extension);
+ unless ($extension=~/\.meta$/) {
+ symlink($root.'.'.$extension.'.meta',
+ $root.'.'.$currentversion.'.'.$extension.'.meta');
+ }
+ }
+ }
+ }
if (-e $fname) {
if (-d $fname) {
$result="directory\n";
@@ -1663,6 +1781,58 @@ sub subscribe {
}
return $result;
}
+
+sub make_passwd_file {
+ my ($uname, $umode,$npass,$passfilename)=@_;
+ my $result="ok\n";
+ if ($umode eq 'krb4' or $umode eq 'krb5') {
+ {
+ my $pf = IO::File->new(">$passfilename");
+ print $pf "$umode:$npass\n";
+ }
+ } elsif ($umode eq 'internal') {
+ my $salt=time;
+ $salt=substr($salt,6,2);
+ my $ncpass=crypt($npass,$salt);
+ {
+ &Debug("Creating internal auth");
+ my $pf = IO::File->new(">$passfilename");
+ print $pf "internal:$ncpass\n";
+ }
+ } elsif ($umode eq 'localauth') {
+ {
+ my $pf = IO::File->new(">$passfilename");
+ print $pf "localauth:$npass\n";
+ }
+ } elsif ($umode eq 'unix') {
+ {
+ my $execpath="$perlvar{'lonDaemons'}/"."lcuseradd";
+ {
+ &Debug("Executing external: ".$execpath);
+ &Debug("user = ".$uname.", Password =". $npass);
+ my $se = IO::File->new("|$execpath > /home/www/lcuseradd.log");
+ print $se "$uname\n";
+ print $se "$npass\n";
+ print $se "$npass\n";
+ }
+ my $useraddok = $?;
+ if($useraddok > 0) {
+ &logthis("Failed lcuseradd: ".&lcuseraddstrerror($useraddok));
+ }
+ my $pf = IO::File->new(">$passfilename");
+ print $pf "unix:\n";
+ }
+ } elsif ($umode eq 'none') {
+ {
+ my $pf = IO::File->new(">$passfilename");
+ print $pf "none:\n";
+ }
+ } else {
+ $result="auth_mode_error\n";
+ }
+ return $result;
+}
+
# ----------------------------------- POD (plain old documentation, CPAN style)
=head1 NAME
@@ -1961,6 +2131,7 @@ Crypt::IDEA
LWP::UserAgent()
GDBM_File
Authen::Krb4
+Authen::Krb5
=head1 COREQUISITES