--- loncom/lond 2002/08/09 10:05:00 1.87 +++ loncom/lond 2003/10/21 09:14:31 1.158 @@ -2,7 +2,7 @@ # The LearningOnline Network # lond "LON Daemon" Server (port "LOND" 5663) # -# $Id: lond,v 1.87 2002/08/09 10:05:00 www Exp $ +# $Id: lond,v 1.158 2003/10/21 09:14:31 foxr Exp $ # # Copyright Michigan State University Board of Trustees # @@ -31,64 +31,508 @@ # 10/7,10/8,10/9,10/11,10/13,10/15,11/4,11/16, # 12/7,12/15,01/06,01/11,01/12,01/14,2/8, # 03/07,05/31 Gerd Kortemeyer -# 06/26 Scott Harrison # 06/29,06/30,07/14,07/15,07/17,07/20,07/25,09/18 Gerd Kortemeyer -# 12/05 Scott Harrison # 12/05,12/13,12/29 Gerd Kortemeyer # YEAR=2001 -# Jan 01 Scott Harrison # 02/12 Gerd Kortemeyer -# 03/15 Scott Harrison # 03/24 Gerd Kortemeyer -# 04/02 Scott Harrison # 05/11,05/28,08/30 Gerd Kortemeyer -# 9/30,10/22,11/13,11/15,11/16 Scott Harrison # 11/26,11/27 Gerd Kortemeyer -# 12/20 Scott Harrison # 12/22 Gerd Kortemeyer # YEAR=2002 # 01/20/02,02/05 Gerd Kortemeyer # 02/05 Guy Albertelli -# 02/07 Scott Harrison # 02/12 Gerd Kortemeyer # 02/19 Matthew Hall # 02/25 Gerd Kortemeyer -# 05/11 Scott Harrison -### +# 01/xx/2003 Ron Fox.. Remove preforking. This makes the general daemon +# logic simpler (and there were problems maintaining the preforked +# population). Since the time averaged connection rate is close to zero +# because lonc's purpose is to maintain near continuous connnections, +# preforking is not really needed. +# 08/xx/2003 Ron Fox: Add management requests. Management requests +# will be validated via a call to ValidateManager. At present, this +# is done by simple host verification. In the future we can modify +# this function to do a certificate check. +# Management functions supported include: +# - pushing /home/httpd/lonTabs/hosts.tab +# - pushing /home/httpd/lonTabs/domain.tab +# 09/08/2003 Ron Fox: Told lond to take care of change logging so we +# don't have to remember it: +# +# Change Log: +# $Log: lond,v $ +# Revision 1.158 2003/10/21 09:14:31 foxr +# Re-install $Log$ in comment header to support automatic change logging. +# +# -# based on "Perl Cookbook" ISBN 1-56592-243-3 -# preforker - server who forks first -# runs as a daemon -# HUPs -# uses IDEA encryption +use strict; use lib '/home/httpd/lib/perl/'; use LONCAPA::Configuration; use IO::Socket; use IO::File; -use Apache::File; +#use Apache::File; use Symbol; use POSIX; use Crypt::IDEA; use LWP::UserAgent(); use GDBM_File; use Authen::Krb4; +use Authen::Krb5; use lib '/home/httpd/lib/perl/'; use localauth; +use File::Copy; my $DEBUG = 0; # Non zero to enable debug log entries. my $status=''; my $lastlog=''; +my $VERSION='$Revision: 1.158 $'; #' stupid emacs +my $remoteVERSION; +my $currenthostid; +my $currentdomainid; + +my $client; +my $clientip; + +my $server; +my $thisserver; + +my %hostid; +my %hostdom; +my %hostip; +my %managers; # If defined $managers{hostname} is a manager +my %perlvar; # Will have the apache conf defined perl vars. + +# +# The array below are password error strings." +# +my $lastpwderror = 13; # Largest error number from lcpasswd. +my @passwderrors = ("ok", + "lcpasswd must be run as user 'www'", + "lcpasswd got incorrect number of arguments", + "lcpasswd did not get the right nubmer of input text lines", + "lcpasswd too many simultaneous pwd changes in progress", + "lcpasswd User does not exist.", + "lcpasswd Incorrect current passwd", + "lcpasswd Unable to su to root.", + "lcpasswd Cannot set new passwd.", + "lcpasswd Username has invalid characters", + "lcpasswd Invalid characters in password", + "11", "12", + "lcpasswd Password mismatch"); + + +# The array below are lcuseradd error strings.: + +my $lastadderror = 13; +my @adderrors = ("ok", + "User ID mismatch, lcuseradd must run as user www", + "lcuseradd Incorrect number of command line parameters must be 3", + "lcuseradd Incorrect number of stdinput lines, must be 3", + "lcuseradd Too many other simultaneous pwd changes in progress", + "lcuseradd User does not exist", + "lcuseradd Unable to make www member of users's group", + "lcuseradd Unable to su to root", + "lcuseradd Unable to set password", + "lcuseradd Usrname has invalid characters", + "lcuseradd Password has an invalid character", + "lcuseradd User already exists", + "lcuseradd Could not add user.", + "lcuseradd Password mismatch"); + + +# +# GetCertificate: Given a transaction that requires a certificate, +# this function will extract the certificate from the transaction +# request. Note that at this point, the only concept of a certificate +# is the hostname to which we are connected. +# +# Parameter: +# request - The request sent by our client (this parameterization may +# need to change when we really use a certificate granting +# authority. +# +sub GetCertificate { + my $request = shift; + + return $clientip; +} +# +# ReadManagerTable: Reads in the current manager table. For now this is +# done on each manager authentication because: +# - These authentications are not frequent +# - This allows dynamic changes to the manager table +# without the need to signal to the lond. +# + +sub ReadManagerTable { + + # Clean out the old table first.. + + foreach my $key (keys %managers) { + delete $managers{$key}; + } + + my $tablename = $perlvar{'lonTabDir'}."/managers.tab"; + if (!open (MANAGERS, $tablename)) { + logthis('No manager table. Nobody can manage!!'); + return; + } + while(my $host = ) { + chomp($host); + if (!defined $hostip{$host}) { + logthis(' manager '.$host. + " not in hosts.tab, rejected as manager"); + } else { + $managers{$host} = $hostip{$host}; # Whatever for now. + } + } +} + +# +# ValidManager: Determines if a given certificate represents a valid manager. +# in this primitive implementation, the 'certificate' is +# just the connecting loncapa client name. This is checked +# against a valid client list in the configuration. +# +# +sub ValidManager { + my $certificate = shift; + + ReadManagerTable; + + my $hostname = $hostid{$certificate}; + + + if ($hostname ne undef) { + if($managers{$hostname} ne undef) { + &logthis('Authenticating manager'. + " $hostname"); + return 1; + } else { + &logthis('"); + return 0; + } + } else { + &logthis(' Failed manager authentication '. + "$certificate "); + return 0; + } +} +# +# CopyFile: Called as part of the process of installing a +# new configuration file. This function copies an existing +# file to a backup file. +# Parameters: +# oldfile - Name of the file to backup. +# newfile - Name of the backup file. +# Return: +# 0 - Failure (errno has failure reason). +# 1 - Success. +# +sub CopyFile { + my $oldfile = shift; + my $newfile = shift; + + # The file must exist: + + if(-e $oldfile) { + + # Read the old file. + + my $oldfh = IO::File->new("< $oldfile"); + if(!$oldfh) { + return 0; + } + my @contents = <$oldfh>; # Suck in the entire file. + + # write the backup file: + + my $newfh = IO::File->new("> $newfile"); + if(!(defined $newfh)){ + return 0; + } + my $lines = scalar @contents; + for (my $i =0; $i < $lines; $i++) { + print $newfh ($contents[$i]); + } + + $oldfh->close; + $newfh->close; + + chmod(0660, $newfile); + + return 1; + + } else { + return 0; + } +} +# +# Host files are passed out with externally visible host IPs. +# If, for example, we are behind a fire-wall or NAT host, our +# internally visible IP may be different than the externally +# visible IP. Therefore, we always adjust the contents of the +# host file so that the entry for ME is the IP that we believe +# we have. At present, this is defined as the entry that +# DNS has for us. If by some chance we are not able to get a +# DNS translation for us, then we assume that the host.tab file +# is correct. +# BUGBUGBUG - in the future, we really should see if we can +# easily query the interface(s) instead. +# Parameter(s): +# contents - The contents of the host.tab to check. +# Returns: +# newcontents - The adjusted contents. +# +# +sub AdjustHostContents { + my $contents = shift; + my $adjusted; + my $me = $perlvar{'lonHostID'}; + + foreach my $line (split(/\n/,$contents)) { + if(!(($line eq "") || ($line =~ /^ *\#/) || ($line =~ /^ *$/))) { + chomp($line); + my ($id,$domain,$role,$name,$ip,$maxcon,$idleto,$mincon)=split(/:/,$line); + if ($id eq $me) { + open(PIPE, " /usr/bin/host $name |") || die "Cant' make host pipeline"; + my $hostinfo = ; + close PIPE; + + my ($hostname, $has, $address, $ipnew) = split(/ /,$hostinfo); + &logthis(''. + "hostname = $hostname me = $me, name = $name actual ip = $ipnew "); + + if ($hostname eq $name) { # Lookup succeeded.. + &logthis(' look up ok '); + $ip = $ipnew; + } else { + &logthis(' Lookup failed: ' + .$hostname." ne $name "); + } + # Reconstruct the host line and append to adjusted: + + my $newline = "$id:$domain:$role:$name:$ip"; + if($maxcon ne "") { # Not all hosts have loncnew tuning params + $newline .= ":$maxcon:$idleto:$mincon"; + } + $adjusted .= $newline."\n"; + + } else { # Not me, pass unmodified. + $adjusted .= $line."\n"; + } + } else { # Blank or comment never re-written. + $adjusted .= $line."\n"; # Pass blanks and comments as is. + } + } + return $adjusted; +} +# +# InstallFile: Called to install an administrative file: +# - The file is created with .tmp +# - The .tmp file is then mv'd to +# This lugubrious procedure is done to ensure that we are never without +# a valid, even if dated, version of the file regardless of who crashes +# and when the crash occurs. +# +# Parameters: +# Name of the file +# File Contents. +# Return: +# nonzero - success. +# 0 - failure and $! has an errno. +# +sub InstallFile { + my $Filename = shift; + my $Contents = shift; + my $TempFile = $Filename.".tmp"; + + # Open the file for write: + + my $fh = IO::File->new("> $TempFile"); # Write to temp. + if(!(defined $fh)) { + &logthis(' Unable to create '.$TempFile.""); + return 0; + } + # write the contents of the file: + + print $fh ($Contents); + $fh->close; # In case we ever have a filesystem w. locking + + chmod(0660, $TempFile); + + # Now we can move install the file in position. + + move($TempFile, $Filename); + + return 1; +} + +# +# PushFile: Called to do an administrative push of a file. +# - Ensure the file being pushed is one we support. +# - Backup the old file to +# - Separate the contents of the new file out from the +# rest of the request. +# - Write the new file. +# Parameter: +# Request - The entire user request. This consists of a : separated +# string pushfile:tablename:contents. +# NOTE: The contents may have :'s in it as well making things a bit +# more interesting... but not much. +# Returns: +# String to send to client ("ok" or "refused" if bad file). +# +sub PushFile { + my $request = shift; + my ($command, $filename, $contents) = split(":", $request, 3); + + # At this point in time, pushes for only the following tables are + # supported: + # hosts.tab ($filename eq host). + # domain.tab ($filename eq domain). + # Construct the destination filename or reject the request. + # + # lonManage is supposed to ensure this, however this session could be + # part of some elaborate spoof that managed somehow to authenticate. + # + + my $tablefile = $perlvar{'lonTabDir'}.'/'; # need to precede with dir. + if ($filename eq "host") { + $tablefile .= "hosts.tab"; + } elsif ($filename eq "domain") { + $tablefile .= "domain.tab"; + } else { + return "refused"; + } + # + # >copy< the old table to the backup table + # don't rename in case system crashes/reboots etc. in the time + # window between a rename and write. + # + my $backupfile = $tablefile; + $backupfile =~ s/\.tab$/.old/; + if(!CopyFile($tablefile, $backupfile)) { + &logthis(' CopyFile from '.$tablefile." to ".$backupfile." failed "); + return "error:$!"; + } + &logthis(' Pushfile: backed up ' + .$tablefile." to $backupfile"); + + # If the file being pushed is the host file, we adjust the entry for ourself so that the + # IP will be our current IP as looked up in dns. Note this is only 99% good as it's possible + # to conceive of conditions where we don't have a DNS entry locally. This is possible in a + # network sense but it doesn't make much sense in a LonCAPA sense so we ignore (for now) + # that possibilty. + + if($filename eq "host") { + $contents = AdjustHostContents($contents); + } + + # Install the new file: + + if(!InstallFile($tablefile, $contents)) { + &logthis(' Pushfile: unable to install ' + .$tablefile." $! "); + return "error:$!"; + } + else { + &logthis(' Installed new '.$tablefile + .""); + + } + + + # Indicate success: + + return "ok"; + +} + +# +# Called to re-init either lonc or lond. +# +# Parameters: +# request - The full request by the client. This is of the form +# reinit: +# where is allowed to be either of +# lonc or lond +# +# Returns: +# The string to be sent back to the client either: +# ok - Everything worked just fine. +# error:why - There was a failure and why describes the reason. +# +# +sub ReinitProcess { + my $request = shift; + + + # separate the request (reinit) from the process identifier and + # validate it producing the name of the .pid file for the process. + # + # + my ($junk, $process) = split(":", $request); + my $processpidfile = $perlvar{'lonDaemons'}.'/logs/'; + if($process eq 'lonc') { + $processpidfile = $processpidfile."lonc.pid"; + if (!open(PIDFILE, "< $processpidfile")) { + return "error:Open failed for $processpidfile"; + } + my $loncpid = ; + close(PIDFILE); + logthis(' Reinitializing lonc pid='.$loncpid + .""); + kill("USR2", $loncpid); + } elsif ($process eq 'lond') { + logthis(' Reinitializing self (lond) '); + &UpdateHosts; # Lond is us!! + } else { + &logthis('"); + return "error:Invalid process identifier $process"; + } + return 'ok'; +} + +# +# Convert an error return code from lcpasswd to a string value. +# +sub lcpasswdstrerror { + my $ErrorCode = shift; + if(($ErrorCode < 0) || ($ErrorCode > $lastpwderror)) { + return "lcpasswd Unrecognized error return value ".$ErrorCode; + } else { + return $passwderrors[$ErrorCode]; + } +} + +# +# Convert an error return code from lcuseradd to a string value: +# +sub lcuseraddstrerror { + my $ErrorCode = shift; + if(($ErrorCode < 0) || ($ErrorCode > $lastadderror)) { + return "lcuseradd - Unrecognized error code: ".$ErrorCode; + } else { + return $adderrors[$ErrorCode]; + } +} + # grabs exception and records it to log before exiting sub catchexception { my ($error)=@_; $SIG{'QUIT'}='DEFAULT'; $SIG{__DIE__}='DEFAULT'; &logthis("CRITICAL: " - ."ABNORMAL EXIT. Child $$ for server $wasserver died through " + ."ABNORMAL EXIT. Child $$ for server $thisserver died through " ."a crash with this error msg->[$error]"); &logthis('Famous last words: '.$status.' - '.$lastlog); if ($client) { print $client "error: $error\n"; } @@ -106,17 +550,16 @@ $SIG{'QUIT'}=\&catchexception; $SIG{__DIE__}=\&catchexception; # ---------------------------------- Read loncapa_apache.conf and loncapa.conf -&status("Read loncapa_apache.conf and loncapa.conf"); -my $perlvarref=LONCAPA::Configuration::read_conf('loncapa_apache.conf', - 'loncapa.conf'); -my %perlvar=%{$perlvarref}; +&status("Read loncapa.conf and loncapa_apache.conf"); +my $perlvarref=LONCAPA::Configuration::read_conf('loncapa.conf'); +%perlvar=%{$perlvarref}; undef $perlvarref; # ----------------------------- Make sure this process is running from user=www my $wwwid=getpwnam('www'); if ($wwwid!=$<) { - $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}"; - $subj="LON: $perlvar{'lonHostID'} User ID mismatch"; + my $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}"; + my $subj="LON: $currenthostid User ID mismatch"; system("echo 'User ID mismatch. lond must be run as user www.' |\ mailto $emailto -s '$subj' > /dev/null"); exit 1; @@ -133,20 +576,9 @@ if (-e $pidfile) { if (kill 0 => $pide) { die "already running"; } } -$PREFORK=4; # number of children to maintain, at least four spare - # ------------------------------------------------------------- Read hosts file -open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file"; -while ($configline=) { - my ($id,$domain,$role,$name,$ip)=split(/:/,$configline); - chomp($ip); $ip=~s/\D+$//; - $hostid{$ip}=$id; - if ($id eq $perlvar{'lonHostID'}) { $thisserver=$name; } - $PREFORK++; -} -close(CONFIG); # establish SERVER socket, bind and listen. $server = IO::Socket::INET->new(LocalPort => $perlvar{'londPort'}, @@ -160,10 +592,8 @@ $server = IO::Socket::INET->new(LocalPor # global variables -$MAX_CLIENTS_PER_CHILD = 50; # number of clients each child should - # process -%children = (); # keys are current child process IDs -$children = 0; # current number of children +my %children = (); # keys are current child process IDs +my $children = 0; # current number of children sub REAPER { # takes care of dead children $SIG{CHLD} = \&REAPER; @@ -192,16 +622,101 @@ sub HUPSMAN { # sig kill 'INT' => keys %children; &logthis("Free socket: ".shutdown($server,2)); # free up socket &logthis("CRITICAL: Restarting"); - unlink("$execdir/logs/lond.pid"); my $execdir=$perlvar{'lonDaemons'}; + unlink("$execdir/logs/lond.pid"); exec("$execdir/lond"); # here we go again } +# +# Kill off hashes that describe the host table prior to re-reading it. +# Hashes affected are: +# %hostid, %hostdom %hostip +# +sub KillHostHashes { + foreach my $key (keys %hostid) { + delete $hostid{$key}; + } + foreach my $key (keys %hostdom) { + delete $hostdom{$key}; + } + foreach my $key (keys %hostip) { + delete $hostip{$key}; + } +} +# +# Read in the host table from file and distribute it into the various hashes: +# +# - %hostid - Indexed by IP, the loncapa hostname. +# - %hostdom - Indexed by loncapa hostname, the domain. +# - %hostip - Indexed by hostid, the Ip address of the host. +sub ReadHostTable { + + open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file"; + + while (my $configline=) { + my ($id,$domain,$role,$name,$ip)=split(/:/,$configline); + chomp($ip); $ip=~s/\D+$//; + $hostid{$ip}=$id; + $hostdom{$id}=$domain; + $hostip{$id}=$ip; + if ($id eq $perlvar{'lonHostID'}) { $thisserver=$name; } + } + close(CONFIG); +} +# +# Reload the Apache daemon's state. +# This is done by invoking /home/httpd/perl/apachereload +# a setuid perl script that can be root for us to do this job. +# +sub ReloadApache { + my $execdir = $perlvar{'lonDaemons'}; + my $script = $execdir."/apachereload"; + system($script); +} + +# +# Called in response to a USR2 signal. +# - Reread hosts.tab +# - All children connected to hosts that were removed from hosts.tab +# are killed via SIGINT +# - All children connected to previously existing hosts are sent SIGUSR1 +# - Our internal hosts hash is updated to reflect the new contents of +# hosts.tab causing connections from hosts added to hosts.tab to +# now be honored. +# +sub UpdateHosts { + logthis(' Updating connections '); + # + # The %children hash has the set of IP's we currently have children + # on. These need to be matched against records in the hosts.tab + # Any ip's no longer in the table get killed off they correspond to + # either dropped or changed hosts. Note that the re-read of the table + # will take care of new and changed hosts as connections come into being. + + + KillHostHashes; + ReadHostTable; + + foreach my $child (keys %children) { + my $childip = $children{$child}; + if(!$hostid{$childip}) { + logthis(' UpdateHosts killing child ' + ." $child for ip $childip "); + kill('INT', $child); + } else { + logthis(' keeping child for ip ' + ." $childip (pid=$child) "); + } + } + ReloadApache; +} + + sub checkchildren { &initnewstatus(); &logstatus(); &logthis('Going to check on the children'); - $docdir=$perlvar{'lonDocRoot'}; + my $docdir=$perlvar{'lonDocRoot'}; foreach (sort keys %children) { sleep 1; unless (kill 'USR1' => $_) { @@ -210,17 +725,25 @@ sub checkchildren { } } sleep 5; + $SIG{ALRM} = sub { die "timeout" }; + $SIG{__DIE__} = 'DEFAULT'; foreach (sort keys %children) { unless (-e "$docdir/lon-status/londchld/$_.txt") { + eval { + alarm(300); &logthis('Child '.$_.' did not respond'); kill 9 => $_; - $emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}"; - $subj="LON: $perlvar{'lonHostID'} killed lond process $_"; - my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`; - $execdir=$perlvar{'lonDaemons'}; - $result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_` + #$emailto="$perlvar{'lonAdmEMail'},$perlvar{'lonSysEMail'}"; + #$subj="LON: $currenthostid killed lond process $_"; + #my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`; + #$execdir=$perlvar{'lonDaemons'}; + #$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`; + alarm(0); + } } } + $SIG{ALRM} = 'DEFAULT'; + $SIG{__DIE__} = \&catchexception; } # --------------------------------------------------------------------- Logging @@ -248,7 +771,7 @@ sub logstatus { my $docdir=$perlvar{'lonDocRoot'}; { my $fh=IO::File->new(">>$docdir/lon-status/londstatus.txt"); - print $fh $$."\t".$status."\t".$lastlog."\n"; + print $fh $$."\t".$currenthostid."\t".$status."\t".$lastlog."\n"; $fh->close(); } { @@ -265,7 +788,7 @@ sub initnewstatus { my $local=localtime($now); print $fh "LOND status $local - parent $$\n\n"; opendir(DIR,"$docdir/lon-status/londchld"); - while ($filename=readdir(DIR)) { + while (my $filename=readdir(DIR)) { unlink("$docdir/lon-status/londchld/$filename"); } closedir(DIR); @@ -278,6 +801,7 @@ sub status { my $now=time; my $local=localtime($now); $status=$local.': '.$what; + $0='lond: '.$what.' '.$local; } # -------------------------------------------------------- Escape Special Chars @@ -308,13 +832,6 @@ sub reconlonc { if (kill 0 => $loncpid) { &logthis("lonc at pid $loncpid responding, sending USR1"); kill USR1 => $loncpid; - sleep 5; - if (-e "$peerfile") { return; } - &logthis("$peerfile still not there, give it another try"); - sleep 10; - if (-e "$peerfile") { return; } - &logthis( - "WARNING: $peerfile still not there, giving up"); } else { &logthis( "CRITICAL: " @@ -344,12 +861,12 @@ sub subreply { sub reply { my ($cmd,$server)=@_; my $answer; - if ($server ne $perlvar{'lonHostID'}) { + if ($server ne $currenthostid) { $answer=subreply($cmd,$server); if ($answer eq 'con_lost') { $answer=subreply("ping",$server); if ($answer ne $server) { - &logthis("sub reply: answer != server"); + &logthis("sub reply: answer != server answer is $answer, server is $server"); &reconlonc("$perlvar{'lonSockDir'}/$server"); } $answer=subreply($cmd,$server); @@ -413,7 +930,7 @@ sub ishome { # ======================================================= Continue main program # ---------------------------------------------------- Fork once and dissociate -$fpid=fork; +my $fpid=fork; exit if $fpid; die "Couldn't fork: $!" unless defined ($fpid); @@ -421,63 +938,76 @@ POSIX::setsid() or die "Can't start new # ------------------------------------------------------- Write our PID on disk -$execdir=$perlvar{'lonDaemons'}; +my $execdir=$perlvar{'lonDaemons'}; open (PIDSAVE,">$execdir/logs/lond.pid"); print PIDSAVE "$$\n"; close(PIDSAVE); &logthis("CRITICAL: ---------- Starting ----------"); &status('Starting'); -# ------------------------------------------------------- Now we are on our own - -# Fork off our children. -for (1 .. $PREFORK) { - make_new_child(); -} + # ----------------------------------------------------- Install signal handlers -&status('Forked children'); $SIG{CHLD} = \&REAPER; $SIG{INT} = $SIG{TERM} = \&HUNTSMAN; $SIG{HUP} = \&HUPSMAN; $SIG{USR1} = \&checkchildren; +$SIG{USR2} = \&UpdateHosts; + +# Read the host hashes: + +ReadHostTable; + +# -------------------------------------------------------------- +# Accept connections. When a connection comes in, it is validated +# and if good, a child process is created to process transactions +# along the connection. -# And maintain the population. while (1) { - &status('Sleeping'); - sleep; # wait for a signal (i.e., child's death) - &logthis('Woke up'); - &status('Woke up'); - for ($i = $children; $i < $PREFORK; $i++) { - make_new_child(); # top up the child pool - } + $client = $server->accept() or next; + make_new_child($client); } sub make_new_child { my $pid; my $cipher; my $sigset; + + $client = shift; &logthis("Attempting to start child"); # block signal for fork $sigset = POSIX::SigSet->new(SIGINT); sigprocmask(SIG_BLOCK, $sigset) or die "Can't block SIGINT for fork: $!\n"; - + die "fork: $!" unless defined ($pid = fork); + + $client->sockopt(SO_KEEPALIVE, 1); # Enable monitoring of + # connection liveness. + + # + # Figure out who we're talking to so we can record the peer in + # the pid hash. + # + my $caller = getpeername($client); + my ($port,$iaddr)=unpack_sockaddr_in($caller); + $clientip=inet_ntoa($iaddr); if ($pid) { # Parent records the child's birth and returns. sigprocmask(SIG_UNBLOCK, $sigset) or die "Can't unblock SIGINT for fork: $!\n"; - $children{$pid} = 1; + $children{$pid} = $clientip; $children++; &status('Started child '.$pid); return; } else { # Child can *not* return from this subroutine. $SIG{INT} = 'DEFAULT'; # make SIGINT kill us as it did before + $SIG{CHLD} = 'DEFAULT'; #make this default so that pwauth returns + #don't get intercepted $SIG{USR1}= \&logstatus; $SIG{ALRM}= \&timeout; $lastlog='Forked '; @@ -487,31 +1017,29 @@ sub make_new_child { sigprocmask(SIG_UNBLOCK, $sigset) or die "Can't unblock SIGINT for fork: $!\n"; - $tmpsnum=0; - - # handle connections until we've reached $MAX_CLIENTS_PER_CHILD - for ($i=0; $i < $MAX_CLIENTS_PER_CHILD; $i++) { - &status('Idle, waiting for connection'); - $client = $server->accept() or last; + my $tmpsnum=0; +#---------------------------------------------------- kerberos 5 initialization + &Authen::Krb5::init_context(); + &Authen::Krb5::init_ets(); + &status('Accepted connection'); # ============================================================================= # do something with the connection # ----------------------------------------------------------------------------- - # see if we know client and check for spoof IP by challenge - my $caller=getpeername($client); - my ($port,$iaddr)=unpack_sockaddr_in($caller); - my $clientip=inet_ntoa($iaddr); + # see if we know client and check for spoof IP by challenge + my $clientrec=($hostid{$clientip} ne undef); &logthis( -"INFO: Connection $i, $clientip ($hostid{$clientip})" +"INFO: Connection, $clientip ($hostid{$clientip})" ); &status("Connecting $clientip ($hostid{$clientip})"); my $clientok; if ($clientrec) { &status("Waiting for init from $clientip ($hostid{$clientip})"); my $remotereq=<$client>; - $remotereq=~s/\W//g; - if ($remotereq eq 'init') { + $remotereq=~s/[^\w:]//g; + if ($remotereq =~ /^init/) { + &sethost("sethost:$perlvar{'lonHostID'}"); my $challenge="$$".time; print $client "$challenge\n"; &status( @@ -540,9 +1068,15 @@ sub make_new_child { if ($clientok) { # ---------------- New known client connecting, could mean machine online again - &reconlonc("$perlvar{'lonSockDir'}/$hostid{$clientip}"); - &logthis( - "Established connection: $hostid{$clientip}"); + foreach my $id (keys(%hostip)) { + if ($hostip{$id} ne $clientip || + $hostip{$currenthostid} eq $clientip) { + # no need to try to do recon's to myself + next; + } + &reconlonc("$perlvar{'lonSockDir'}/$id"); + } + &logthis("Established connection: $hostid{$clientip}"); &status('Will listen to '.$hostid{$clientip}); # ------------------------------------------------------------ Process requests while (my $userinput=<$client>) { @@ -570,17 +1104,17 @@ sub make_new_child { # ------------------------------------------------------------- Normal commands # ------------------------------------------------------------------------ ping if ($userinput =~ /^ping/) { - print $client "$perlvar{'lonHostID'}\n"; + print $client "$currenthostid\n"; # ------------------------------------------------------------------------ pong - } elsif ($userinput =~ /^pong/) { - $reply=reply("ping",$hostid{$clientip}); - print $client "$perlvar{'lonHostID'}:$reply\n"; + }elsif ($userinput =~ /^pong/) { + my $reply=&reply("ping",$hostid{$clientip}); + print $client "$currenthostid:$reply\n"; # ------------------------------------------------------------------------ ekey } elsif ($userinput =~ /^ekey/) { my $buildkey=time.$$.int(rand 100000); $buildkey=~tr/1-6/A-F/; $buildkey=int(rand 100000).$buildkey.int(rand 100000); - my $key=$perlvar{'lonHostID'}.$hostid{$clientip}; + my $key=$currenthostid.$hostid{$clientip}; $key=~tr/a-z/A-Z/; $key=~tr/G-P/0-9/; $key=~tr/Q-Z/0-9/; @@ -597,8 +1131,16 @@ sub make_new_child { $loadavg=<$loadfile>; } $loadavg =~ s/\s.*//g; - my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'}; + my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'}; print $client "$loadpercent\n"; +# -------------------------------------------------------------------- userload + } elsif ($userinput =~ /^userload/) { + my $userloadpercent=&userload(); + print $client "$userloadpercent\n"; + +# +# Transactions requiring encryption: +# # ----------------------------------------------------------------- currentauth } elsif ($userinput =~ /^currentauth/) { if ($wasenc==1) { @@ -613,6 +1155,33 @@ sub make_new_child { } else { print $client "refused\n"; } +#--------------------------------------------------------------------- pushfile + } elsif($userinput =~ /^pushfile/) { + if($wasenc == 1) { + my $cert = GetCertificate($userinput); + if(ValidManager($cert)) { + my $reply = PushFile($userinput); + print $client "$reply\n"; + } else { + print $client "refused\n"; + } + } else { + print $client "refused\n"; + } +#--------------------------------------------------------------------- reinit + } elsif($userinput =~ /^reinit/) { + if ($wasenc == 1) { + my $cert = GetCertificate($userinput); + if(ValidManager($cert)) { + chomp($userinput); + my $reply = ReinitProcess($userinput); + print $client "$reply\n"; + } else { + print $client "refused\n"; + } + } else { + print $client "refused\n"; + } # ------------------------------------------------------------------------ auth } elsif ($userinput =~ /^auth/) { if ($wasenc==1) { @@ -628,15 +1197,22 @@ sub make_new_child { my ($howpwd,$contentpwd)=split(/:/,$realpasswd); my $pwdcorrect=0; if ($howpwd eq 'internal') { + &Debug("Internal auth"); $pwdcorrect= (crypt($upass,$contentpwd) eq $contentpwd); } elsif ($howpwd eq 'unix') { - $contentpwd=(getpwnam($uname))[1]; - my $pwauth_path="/usr/local/sbin/pwauth"; - unless ($contentpwd eq 'x') { - $pwdcorrect= - (crypt($upass,$contentpwd) eq $contentpwd); - } + &Debug("Unix auth"); + if((getpwnam($uname))[1] eq "") { #no such user! + $pwdcorrect = 0; + } else { + $contentpwd=(getpwnam($uname))[1]; + my $pwauth_path="/usr/local/sbin/pwauth"; + unless ($contentpwd eq 'x') { + $pwdcorrect= + (crypt($upass,$contentpwd) eq + $contentpwd); + } + elsif (-e $pwauth_path) { open PWAUTH, "|$pwauth_path" or die "Cannot invoke authentication"; @@ -644,14 +1220,41 @@ sub make_new_child { close PWAUTH; $pwdcorrect=!$?; } + } } elsif ($howpwd eq 'krb4') { - $null=pack("C",0); - unless ($upass=~/$null/) { - $pwdcorrect=( - Authen::Krb4::get_pw_in_tkt($uname,"", - $contentpwd,'krbtgt',$contentpwd,1, - $upass) == 0); - } else { $pwdcorrect=0; } + my $null=pack("C",0); + unless ($upass=~/$null/) { + my $krb4_error = &Authen::Krb4::get_pw_in_tkt + ($uname,"",$contentpwd,'krbtgt', + $contentpwd,1,$upass); + if (!$krb4_error) { + $pwdcorrect = 1; + } else { + $pwdcorrect=0; + # log error if it is not a bad password + if ($krb4_error != 62) { + &logthis('krb4:'.$uname.','.$contentpwd.','. + &Authen::Krb4::get_err_txt($Authen::Krb4::error)); + } + } + } + } elsif ($howpwd eq 'krb5') { + my $null=pack("C",0); + unless ($upass=~/$null/) { + my $krbclient=&Authen::Krb5::parse_name($uname.'@'.$contentpwd); + my $krbservice="krbtgt/".$contentpwd."\@".$contentpwd; + my $krbserver=&Authen::Krb5::parse_name($krbservice); + my $credentials=&Authen::Krb5::cc_default(); + $credentials->initialize($krbclient); + my $krbreturn = + &Authen::Krb5::get_in_tkt_with_password( + $krbclient,$krbserver,$upass,$credentials); +# unless ($krbreturn) { +# &logthis("Krb5 Error: ". +# &Authen::Krb5::error()); +# } + $pwdcorrect = ($krbreturn == 1); + } else { $pwdcorrect=0; } } elsif ($howpwd eq 'localauth') { $pwdcorrect=&localauth::localauth($uname,$upass, $contentpwd); @@ -675,7 +1278,7 @@ sub make_new_child { chomp($npass); $upass=&unescape($upass); $npass=&unescape($npass); - &logthis("Trying to change password for $uname"); + &Debug("Trying to change password for $uname"); my $proname=propath($udom,$uname); my $passfilename="$proname/passwd"; if (-e $passfilename) { @@ -685,14 +1288,23 @@ sub make_new_child { chomp($realpasswd); my ($howpwd,$contentpwd)=split(/:/,$realpasswd); if ($howpwd eq 'internal') { + &Debug("internal auth"); if (crypt($upass,$contentpwd) eq $contentpwd) { my $salt=time; $salt=substr($salt,6,2); my $ncpass=crypt($npass,$salt); - { my $pf = IO::File->new(">$passfilename"); - print $pf "internal:$ncpass\n"; } - &logthis("Result of password change for $uname: pwchange_success"); - print $client "ok\n"; + { + my $pf; + if ($pf = IO::File->new(">$passfilename")) { + print $pf "internal:$ncpass\n"; + &logthis("Result of password change for $uname: pwchange_success"); + print $client "ok\n"; + } else { + &logthis("Unable to open $uname passwd to change password"); + print $client "non_authorized\n"; + } + } + } else { print $client "non_authorized\n"; } @@ -701,6 +1313,7 @@ sub make_new_child { # one way or another. # First: Make sure the current password is # correct + &Debug("auth is unix"); $contentpwd=(getpwnam($uname))[1]; my $pwdcorrect = "0"; my $pwauth_path="/usr/local/sbin/pwauth"; @@ -712,16 +1325,20 @@ sub make_new_child { die "Cannot invoke authentication"; print PWAUTH "$uname\n$upass\n"; close PWAUTH; - $pwdcorrect=!$?; + &Debug("exited pwauth with $? ($uname,$upass) "); + $pwdcorrect=($? == 0); } if ($pwdcorrect) { my $execdir=$perlvar{'lonDaemons'}; - my $pf = IO::File->new("|$execdir/lcpasswd"); + &Debug("Opening lcpasswd pipeline"); + my $pf = IO::File->new("|$execdir/lcpasswd > $perlvar{'lonDaemons'}/logs/lcpasswd.log"); print $pf "$uname\n$npass\n$npass\n"; close $pf; - my $result = ($?>0 ? 'pwchange_failure' + my $err = $?; + my $result = ($err>0 ? 'pwchange_failure' : 'ok'); - &logthis("Result of password change for $uname: $result"); + &logthis("Result of password change for $uname: ". + &lcpasswdstrerror($?)); print $client "$result\n"; } else { print $client "non_authorized\n"; @@ -737,7 +1354,7 @@ sub make_new_child { } # -------------------------------------------------------------------- makeuser } elsif ($userinput =~ /^makeuser/) { - Debug("Make user received"); + &Debug("Make user received"); my $oldumask=umask(0077); if ($wasenc==1) { my @@ -752,68 +1369,26 @@ sub make_new_child { $passfilename); if (-e $passfilename) { print $client "already_exists\n"; - } elsif ($udom ne $perlvar{'lonDefDomain'}) { + } elsif ($udom ne $currentdomainid) { print $client "not_right_domain\n"; } else { - @fpparts=split(/\//,$proname); - $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2]; - $fperror=''; - for ($i=3;$i<=$#fpparts;$i++) { + my @fpparts=split(/\//,$proname); + my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2]; + my $fperror=''; + for (my $i=3;$i<=$#fpparts;$i++) { $fpnow.='/'.$fpparts[$i]; unless (-e $fpnow) { unless (mkdir($fpnow,0777)) { - $fperror="error:$!"; + $fperror="error: ".($!+0) + ." mkdir failed while attempting " + ."makeuser\n"; } } } unless ($fperror) { - if ($umode eq 'krb4') { - { - my $pf = IO::File->new(">$passfilename"); - print $pf "krb4:$npass\n"; - } - print $client "ok\n"; - } elsif ($umode eq 'internal') { - my $salt=time; - $salt=substr($salt,6,2); - my $ncpass=crypt($npass,$salt); - { - &Debug("Creating internal auth"); - my $pf = IO::File->new(">$passfilename"); - print $pf "internal:$ncpass\n"; - } - print $client "ok\n"; - } elsif ($umode eq 'localauth') { - { - my $pf = IO::File->new(">$passfilename"); - print $pf "localauth:$npass\n"; - } - print $client "ok\n"; - } elsif ($umode eq 'unix') { - { - my $execpath="$perlvar{'lonDaemons'}/". - "lcuseradd"; - { - &Debug("Executing external: ". - $execpath); - my $se = IO::File->new("|$execpath"); - print $se "$uname\n"; - print $se "$npass\n"; - print $se "$npass\n"; - } - my $pf = IO::File->new(">$passfilename"); - print $pf "unix:\n"; - } - print $client "ok\n"; - } elsif ($umode eq 'none') { - { - my $pf = IO::File->new(">$passfilename"); - print $pf "none:\n"; - } - print $client "ok\n"; - } else { - print $client "auth_mode_error\n"; - } + my $result=&make_passwd_file($uname, $umode,$npass, + $passfilename); + print $client $result; } else { print $client "$fperror\n"; } @@ -827,60 +1402,19 @@ sub make_new_child { &Debug("Changing authorization"); if ($wasenc==1) { my - ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput); + ($cmd,$udom,$uname,$umode,$npass)=split(/:/,$userinput); chomp($npass); &Debug("cmd = ".$cmd." domain= ".$udom. "uname =".$uname." umode= ".$umode); $npass=&unescape($npass); - my $proname=propath($udom,$uname); + my $proname=&propath($udom,$uname); my $passfilename="$proname/passwd"; - if ($udom ne $perlvar{'lonDefDomain'}) { + if ($udom ne $currentdomainid) { print $client "not_right_domain\n"; } else { - if ($umode eq 'krb4') { - { - my $pf = IO::File->new(">$passfilename"); - print $pf "krb4:$npass\n"; - } - print $client "ok\n"; - } elsif ($umode eq 'internal') { - my $salt=time; - $salt=substr($salt,6,2); - my $ncpass=crypt($npass,$salt); - { - my $pf = IO::File->new(">$passfilename"); - print $pf "internal:$ncpass\n"; - } - print $client "ok\n"; - } elsif ($umode eq 'localauth') { - { - my $pf = IO::File->new(">$passfilename"); - print $pf "localauth:$npass\n"; - } - print $client "ok\n"; - } elsif ($umode eq 'unix') { - { - my $execpath="$perlvar{'lonDaemons'}/". - "lcuseradd"; - { - my $se = IO::File->new("|$execpath"); - print $se "$uname\n"; - print $se "$npass\n"; - print $se "$npass\n"; - } - my $pf = IO::File->new(">$passfilename"); - print $pf "unix:\n"; - } - print $client "ok\n"; - } elsif ($umode eq 'none') { - { - my $pf = IO::File->new(">$passfilename"); - print $pf "none:\n"; - } - print $client "ok\n"; - } else { - print $client "auth_mode_error\n"; - } + my $result=&make_passwd_file($uname, $umode,$npass, + $passfilename); + print $client $result; } } else { print $client "refused\n"; @@ -905,11 +1439,11 @@ sub make_new_child { $uid,$gid,$rdev,$size, $atime,$mtime,$ctime, $blksize,$blocks)=stat($fname); - $now=time; - $since=$now-$atime; + my $now=time; + my $since=$now-$atime; if ($since>$perlvar{'lonExpire'}) { - $reply= - reply("unsub:$fname","$hostid{$clientip}"); + my $reply= + &reply("unsub:$fname","$hostid{$clientip}"); unlink("$fname"); } else { my $transname="$fname.in.transfer"; @@ -949,47 +1483,53 @@ sub make_new_child { } # -------------------------------------- fetch a user file from a remote server } elsif ($userinput =~ /^fetchuserfile/) { - my ($cmd,$fname)=split(/:/,$userinput); - my ($udom,$uname,$ufile)=split(/\//,$fname); - my $udir=propath($udom,$uname).'/userfiles'; - unless (-e $udir) { mkdir($udir); } + my ($cmd,$fname)=split(/:/,$userinput); + my ($udom,$uname,$ufile)=split(/\//,$fname); + my $udir=propath($udom,$uname).'/userfiles'; + unless (-e $udir) { mkdir($udir,0770); } if (-e $udir) { - $ufile=~s/^[\.\~]+//; - $ufile=~s/\///g; - my $transname=$udir.'/'.$ufile; - my $remoteurl='http://'.$clientip.'/userfiles/'.$fname; - my $response; - { - my $ua=new LWP::UserAgent; - my $request=new HTTP::Request('GET',"$remoteurl"); - $response=$ua->request($request,$transname); - } - if ($response->is_error()) { - unlink($transname); - my $message=$response->status_line; - &logthis( - "LWP GET: $message for $fname ($remoteurl)"); - print $client "failed\n"; - } else { - print $client "ok\n"; - } - } else { - print $client "not_home\n"; - } + $ufile=~s/^[\.\~]+//; + $ufile=~s/\///g; + my $destname=$udir.'/'.$ufile; + my $transname=$udir.'/'.$ufile.'.in.transit'; + my $remoteurl='http://'.$clientip.'/userfiles/'.$fname; + my $response; + { + my $ua=new LWP::UserAgent; + my $request=new HTTP::Request('GET',"$remoteurl"); + $response=$ua->request($request,$transname); + } + if ($response->is_error()) { + unlink($transname); + my $message=$response->status_line; + &logthis("LWP GET: $message for $fname ($remoteurl)"); + print $client "failed\n"; + } else { + if (!rename($transname,$destname)) { + &logthis("Unable to move $transname to $destname"); + unlink($transname); + print $client "failed\n"; + } else { + print $client "ok\n"; + } + } + } else { + print $client "not_home\n"; + } # ------------------------------------------ authenticate access to a user file } elsif ($userinput =~ /^tokenauthuserfile/) { my ($cmd,$fname,$session)=split(/:/,$userinput); chomp($session); - $reply='non_auth'; + my $reply='non_auth'; if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'. - $session.'.id')) { - while ($line=) { - if ($line=~/userfile\.$fname\=/) { $reply='ok'; } - } - close(ENVIN); - print $client $reply."\n"; + $session.'.id')) { + while (my $line=) { + if ($line=~/userfile\.$fname\=/) { $reply='ok'; } + } + close(ENVIN); + print $client $reply."\n"; } else { - print $client "invalid_token\n"; + print $client "invalid_token\n"; } # ----------------------------------------------------------------- unsubscribe } elsif ($userinput =~ /^unsub/) { @@ -1002,6 +1542,10 @@ sub make_new_child { # ------------------------------------------------------------------- subscribe } elsif ($userinput =~ /^sub/) { print $client &subscribe($userinput,$clientip); +# ------------------------------------------------------------- current version + } elsif ($userinput =~ /^currentversion/) { + my ($cmd,$fname)=split(/:/,$userinput); + print $client ¤tversion($fname)."\n"; # ------------------------------------------------------------------------- log } elsif ($userinput =~ /^log/) { my ($cmd,$udom,$uname,$what)=split(/:/,$userinput); @@ -1014,7 +1558,9 @@ sub make_new_child { print $hfh "$now:$hostid{$clientip}:$what\n"; print $client "ok\n"; } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." IO::File->new Failed " + ."while attempting log\n"; } } # ------------------------------------------------------------------------- put @@ -1034,18 +1580,23 @@ sub make_new_child { ) { print $hfh "P:$now:$what\n"; } } my @pairs=split(/\&/,$what); - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT,0640)) { - foreach $pair (@pairs) { - ($key,$value)=split(/=/,$pair); + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); $hash{$key}=$value; } if (untie(%hash)) { print $client "ok\n"; } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." untie(GDBM) failed ". + "while attempting put\n"; } } else { - print $client "error:$!\n"; + print $client "error: ".($!) + ." tie(GDBM) Failed ". + "while attempting put\n"; } } else { print $client "refused\n"; @@ -1072,22 +1623,68 @@ sub make_new_child { } } my @pairs=split(/\&/,$what); - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT,0640)) { - foreach $pair (@pairs) { - ($key,$value)=split(/=/,$pair); + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); &ManagePermissions($key, $udom, $uname, &GetAuthType( $udom, $uname)); $hash{$key}=$value; - } if (untie(%hash)) { print $client "ok\n"; } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting rolesput\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting rolesput\n"; + } + } else { + print $client "refused\n"; + } +# -------------------------------------------------------------------- rolesdel + } elsif ($userinput =~ /^rolesdel/) { + &Debug("rolesdel"); + if ($wasenc==1) { + my ($cmd,$exedom,$exeuser,$udom,$uname,$what) + =split(/:/,$userinput); + &Debug("cmd = ".$cmd." exedom= ".$exedom. + "user = ".$exeuser." udom=".$udom. + "what = ".$what); + my $namespace='roles'; + chomp($what); + my $proname=propath($udom,$uname); + my $now=time; + { + my $hfh; + if ( + $hfh=IO::File->new(">>$proname/$namespace.hist") + ) { + print $hfh "D:$now:$exedom:$exeuser:$what\n"; + } + } + my @rolekeys=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { + foreach my $key (@rolekeys) { + delete $hash{$key}; + } + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting rolesdel\n"; } } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting rolesdel\n"; } } else { print $client "refused\n"; @@ -1102,18 +1699,28 @@ sub make_new_child { my @queries=split(/\&/,$what); my $proname=propath($udom,$uname); my $qresult=''; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER,0640)) { - for ($i=0;$i<=$#queries;$i++) { + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { + for (my $i=0;$i<=$#queries;$i++) { $qresult.="$hash{$queries[$i]}&"; } if (untie(%hash)) { $qresult=~s/\&$//; print $client "$qresult\n"; } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting get\n"; } } else { - print $client "error:$!\n"; + if ($!+0 == 2) { + print $client "error:No such file or ". + "GDBM reported bad block error\n"; + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting get\n"; + } } # ------------------------------------------------------------------------ eget } elsif ($userinput =~ /^eget/) { @@ -1125,8 +1732,9 @@ sub make_new_child { my @queries=split(/\&/,$what); my $proname=propath($udom,$uname); my $qresult=''; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER,0640)) { - for ($i=0;$i<=$#queries;$i++) { + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { + for (my $i=0;$i<=$#queries;$i++) { $qresult.="$hash{$queries[$i]}&"; } if (untie(%hash)) { @@ -1146,10 +1754,14 @@ sub make_new_child { print $client "error:no_key\n"; } } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting eget\n"; } } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting eget\n"; } # ------------------------------------------------------------------------- del } elsif ($userinput =~ /^del/) { @@ -1167,17 +1779,22 @@ sub make_new_child { ) { print $hfh "D:$now:$what\n"; } } my @keys=split(/\&/,$what); - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT,0640)) { - foreach $key (@keys) { + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { + foreach my $key (@keys) { delete($hash{$key}); } if (untie(%hash)) { print $client "ok\n"; } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting del\n"; } } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting del\n"; } # ------------------------------------------------------------------------ keys } elsif ($userinput =~ /^keys/) { @@ -1187,18 +1804,69 @@ sub make_new_child { $namespace=~s/\W//g; my $proname=propath($udom,$uname); my $qresult=''; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER,0640)) { - foreach $key (keys %hash) { + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { + foreach my $key (keys %hash) { $qresult.="$key&"; } if (untie(%hash)) { $qresult=~s/\&$//; print $client "$qresult\n"; } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting keys\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting keys\n"; + } +# ----------------------------------------------------------------- dumpcurrent + } elsif ($userinput =~ /^currentdump/) { + my ($cmd,$udom,$uname,$namespace) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + my $qresult=''; + my $proname=propath($udom,$uname); + my %hash; + if (tie(%hash,'GDBM_File', + "$proname/$namespace.db", + &GDBM_READER(),0640)) { + # Structure of %data: + # $data{$symb}->{$parameter}=$value; + # $data{$symb}->{'v.'.$parameter}=$version; + # since $parameter will be unescaped, we do not + # have to worry about silly parameter names... + my %data = (); + while (my ($key,$value) = each(%hash)) { + my ($v,$symb,$param) = split(/:/,$key); + next if ($v eq 'version' || $symb eq 'keys'); + next if (exists($data{$symb}) && + exists($data{$symb}->{$param}) && + $data{$symb}->{'v.'.$param} > $v); + $data{$symb}->{$param}=$value; + $data{$symb}->{'v.'.$param}=$v; + } + if (untie(%hash)) { + while (my ($symb,$param_hash) = each(%data)) { + while(my ($param,$value) = each (%$param_hash)){ + next if ($param =~ /^v\./); + $qresult.=$symb.':'.$param.'='.$value.'&'; + } + } + chop($qresult); + print $client "$qresult\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting currentdump\n"; } } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting currentdump\n"; } # ------------------------------------------------------------------------ dump } elsif ($userinput =~ /^dump/) { @@ -1211,22 +1879,33 @@ sub make_new_child { } else { $regexp='.'; } - my $proname=propath($udom,$uname); my $qresult=''; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER,0640)) { - foreach $key (keys %hash) { - if (eval('$key=~/$regexp/')) { - $qresult.="$key=$hash{$key}&"; - } + my $proname=propath($udom,$uname); + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { + study($regexp); + while (my ($key,$value) = each(%hash)) { + if ($regexp eq '.') { + $qresult.=$key.'='.$value.'&'; + } else { + my $unescapeKey = &unescape($key); + if (eval('$unescapeKey=~/$regexp/')) { + $qresult.="$key=$value&"; + } + } } - if (untie(%hash)) { - $qresult=~s/\&$//; - print $client "$qresult\n"; + if (untie(%hash)) { + chop($qresult); + print $client "$qresult\n"; } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting dump\n"; } } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting dump\n"; } # ----------------------------------------------------------------------- store } elsif ($userinput =~ /^store/) { @@ -1245,15 +1924,15 @@ sub make_new_child { ) { print $hfh "P:$now:$rid:$what\n"; } } my @pairs=split(/\&/,$what); - - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT,0640)) { + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { my @previouskeys=split(/&/,$hash{"keys:$rid"}); my $key; $hash{"version:$rid"}++; my $version=$hash{"version:$rid"}; my $allkeys=''; - foreach $pair (@pairs) { - ($key,$value)=split(/=/,$pair); + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); $allkeys.=$key.':'; $hash{"$version:$rid:$key"}=$value; } @@ -1263,10 +1942,14 @@ sub make_new_child { if (untie(%hash)) { print $client "ok\n"; } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting store\n"; } } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting store\n"; } } else { print $client "refused\n"; @@ -1280,7 +1963,8 @@ sub make_new_child { chomp($rid); my $proname=propath($udom,$uname); my $qresult=''; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER,0640)) { + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { my $version=$hash{"version:$rid"}; $qresult.="version=$version&"; my $scope; @@ -1297,10 +1981,14 @@ sub make_new_child { $qresult=~s/\&$//; print $client "$qresult\n"; } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting restore\n"; } } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting restore\n"; } # -------------------------------------------------------------------- chatsend } elsif ($userinput =~ /^chatsend/) { @@ -1309,9 +1997,10 @@ sub make_new_child { print $client "ok\n"; # -------------------------------------------------------------------- chatretr } elsif ($userinput =~ /^chatretr/) { - my ($cmd,$cdom,$cnum)=split(/\:/,$userinput); + my + ($cmd,$cdom,$cnum,$udom,$uname)=split(/\:/,$userinput); my $reply=''; - foreach (&getchat($cdom,$cnum)) { + foreach (&getchat($cdom,$cnum,$udom,$uname)) { $reply.=&escape($_).':'; } $reply=~s/\:$//; @@ -1339,8 +2028,77 @@ sub make_new_child { print $client "ok\n"; } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." IO::File->new Failed ". + "while attempting queryreply\n"; + } +# ----------------------------------------------------------------- courseidput + } elsif ($userinput =~ /^courseidput/) { + my ($cmd,$udom,$what)=split(/:/,$userinput); + chomp($what); + $udom=~s/\W//g; + my $proname= + "$perlvar{'lonUsersDir'}/$udom/nohist_courseids"; + my $now=time; + my @pairs=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) { + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + $hash{$key}=$value.':'.$now; + } + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting courseidput\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting courseidput\n"; + } +# ---------------------------------------------------------------- courseiddump + } elsif ($userinput =~ /^courseiddump/) { + my ($cmd,$udom,$since,$description) + =split(/:/,$userinput); + if (defined($description)) { + $description=&unescape($description); + } else { + $description='.'; } + unless (defined($since)) { $since=0; } + my $qresult=''; + my $proname= + "$perlvar{'lonUsersDir'}/$udom/nohist_courseids"; + my %hash; + if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) { + while (my ($key,$value) = each(%hash)) { + my ($descr,$lasttime)=split(/\:/,$value); + if ($lasttime<$since) { next; } + if ($description eq '.') { + $qresult.=$key.'='.$descr.'&'; + } else { + my $unescapeVal = &unescape($descr); + if (eval('$unescapeVal=~/$description/i')) { + $qresult.="$key=$descr&"; + } + } + } + if (untie(%hash)) { + chop($qresult); + print $client "$qresult\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting courseiddump\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting courseiddump\n"; + } # ----------------------------------------------------------------------- idput } elsif ($userinput =~ /^idput/) { my ($cmd,$udom,$what)=split(/:/,$userinput); @@ -1355,18 +2113,23 @@ sub make_new_child { ) { print $hfh "P:$now:$what\n"; } } my @pairs=split(/\&/,$what); - if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT,0640)) { - foreach $pair (@pairs) { - ($key,$value)=split(/=/,$pair); + my %hash; + if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) { + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); $hash{$key}=$value; } if (untie(%hash)) { print $client "ok\n"; } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting idput\n"; } } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting idput\n"; } # ----------------------------------------------------------------------- idget } elsif ($userinput =~ /^idget/) { @@ -1376,18 +2139,23 @@ sub make_new_child { my $proname="$perlvar{'lonUsersDir'}/$udom/ids"; my @queries=split(/\&/,$what); my $qresult=''; - if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER,0640)) { - for ($i=0;$i<=$#queries;$i++) { + my %hash; + if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) { + for (my $i=0;$i<=$#queries;$i++) { $qresult.="$hash{$queries[$i]}&"; } if (untie(%hash)) { - $qresult=~s/\&$//; - print $client "$qresult\n"; + $qresult=~s/\&$//; + print $client "$qresult\n"; } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting idget\n"; } } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting idget\n"; } # ---------------------------------------------------------------------- tmpput } elsif ($userinput =~ /^tmpput/) { @@ -1404,7 +2172,9 @@ sub make_new_child { print $client "$id\n"; } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ."IO::File->new Failed ". + "while attempting tmpput\n"; } # ---------------------------------------------------------------------- tmpget @@ -1420,9 +2190,24 @@ sub make_new_child { close $store; } else { - print $client "error:$!\n"; + print $client "error: ".($!+0) + ."IO::File->new Failed ". + "while attempting tmpget\n"; } +# ---------------------------------------------------------------------- tmpdel + } elsif ($userinput =~ /^tmpdel/) { + my ($cmd,$id)=split(/:/,$userinput); + chomp($id); + $id=~s/\W/\_/g; + my $execdir=$perlvar{'lonDaemons'}; + if (unlink("$execdir/tmp/$id.tmp")) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ."Unlink tmp Failed ". + "while attempting tmpdel\n"; + } # -------------------------------------------------------------------------- ls } elsif ($userinput =~ /^ls/) { my ($cmd,$ulsdir)=split(/:/,$userinput); @@ -1447,6 +2232,19 @@ sub make_new_child { } if ($ulsout eq '') { $ulsout='empty'; } print $client "$ulsout\n"; +# ----------------------------------------------------------------- setannounce + } elsif ($userinput =~ /^setannounce/) { + my ($cmd,$announcement)=split(/:/,$userinput); + chomp($announcement); + $announcement=&unescape($announcement); + if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}. + '/announcement.txt')) { + print $store $announcement; + close $store; + print $client "ok\n"; + } else { + print $client "error: ".($!+0)."\n"; + } # ------------------------------------------------------------------ Hanging up } elsif (($userinput =~ /^exit/) || ($userinput =~ /^init/)) { @@ -1456,6 +2254,10 @@ sub make_new_child { $client->close(); last; # ------------------------------------------------------------- unknown command + } elsif ($userinput =~ /^sethost:/) { + print $client &sethost($userinput)."\n"; + } elsif ($userinput =~/^version:/) { + print $client &version($userinput)."\n"; } else { # unknown command print $client "unknown_cmd\n"; @@ -1471,21 +2273,19 @@ sub make_new_child { &logthis("WARNING: " ."Rejected client $clientip, closing connection"); } - } + } # ============================================================================= &logthis("CRITICAL: " ."Disconnect from $clientip ($hostid{$clientip})"); - # tidy up gracefully and finish - - $server->close(); + # this exit is VERY important, otherwise the child will become # a producer of more and more children, forking yourself into # process death. exit; - } + } @@ -1508,11 +2308,11 @@ sub ManagePermissions my $authtype= shift; # See if the request is of the form /$domain/_au - + &logthis("ruequest is $request"); if($request =~ /^(\/$domain\/_au)$/) { # It's an author rolesput... my $execdir = $perlvar{'lonDaemons'}; my $userhome= "/home/$user" ; - Debug("system $execdir/lchtmldir $userhome $system $authtype"); + &logthis("system $execdir/lchtmldir $userhome $user $authtype"); system("$execdir/lchtmldir $userhome $user $authtype"); } } @@ -1537,7 +2337,7 @@ sub GetAuthType my ($authtype, $contentpwd) = split(/:/, $realpassword); Debug("Authtype = $authtype, content = $contentpwd\n"); my $availinfo = ''; - if($authtype eq 'krb4') { + if($authtype eq 'krb4' or $authtype eq 'krb5') { $availinfo = $contentpwd; } @@ -1555,6 +2355,7 @@ sub addline { my $found=0; my $expr='^'.$hostid.':'.$ip.':'; $expr =~ s/\./\\\./g; + my $sh; if ($sh=IO::File->new("$fname.subscription")) { while (my $subline=<$sh>) { if ($subline !~ /$expr/) {$contents.= $subline;} else {$found=1;} @@ -1569,48 +2370,64 @@ sub addline { } sub getchat { - my ($cdom,$cname)=@_; + my ($cdom,$cname,$udom,$uname)=@_; my %hash; my $proname=&propath($cdom,$cname); my @entries=(); - if - (tie(%hash,'GDBM_File',"$proname/nohist_chatroom.db",&GDBM_READER(),0640)) - { - @entries=map { $_.':'.$hash{$_} } sort keys %hash; - untie %hash; + if (tie(%hash,'GDBM_File',"$proname/nohist_chatroom.db", + &GDBM_READER(),0640)) { + @entries=map { $_.':'.$hash{$_} } sort keys %hash; + untie %hash; + } + my @participants=(); + my $cutoff=time-60; + if (tie(%hash,'GDBM_File',"$proname/nohist_inchatroom.db", + &GDBM_WRCREAT(),0640)) { + $hash{$uname.':'.$udom}=time; + foreach (sort keys %hash) { + if ($hash{$_}>$cutoff) { + $participants[$#participants+1]='active_participant:'.$_; + } + } + untie %hash; } - return @entries; + return (@participants,@entries); } sub chatadd { - my ($cdom,$cname,$newchat)=@_; - my %hash; - my $proname=&propath($cdom,$cname); - my @entries=(); - if - (tie(%hash,'GDBM_File',"$proname/nohist_chatroom.db",&GDBM_WRCREAT(),0640)) - { - @entries=map { $_.':'.$hash{$_} } sort keys %hash; + my ($cdom,$cname,$newchat)=@_; + my %hash; + my $proname=&propath($cdom,$cname); + my @entries=(); my $time=time; - my ($lastid)=($entries[$#entries]=~/^(\w+)\:/); - my ($thentime,$idnum)=split(/\_/,$lastid); - my $newid=$time.'_000000'; - if ($thentime==$time) { - $idnum=~s/^0+//; - $idnum++; - $idnum=substr('000000'.$idnum,-6,6); - $newid=$time.'_'.$idnum; - } - $hash{$newid}=$newchat; - my $expired=$time-3600; - foreach (keys %hash) { - my ($thistime)=($_=~/(\d+)\_/); - if ($thistime<$expired) { - undef $hash{$_}; - } + if (tie(%hash,'GDBM_File',"$proname/nohist_chatroom.db", + &GDBM_WRCREAT(),0640)) { + @entries=map { $_.':'.$hash{$_} } sort keys %hash; + my ($lastid)=($entries[$#entries]=~/^(\w+)\:/); + my ($thentime,$idnum)=split(/\_/,$lastid); + my $newid=$time.'_000000'; + if ($thentime==$time) { + $idnum=~s/^0+//; + $idnum++; + $idnum=substr('000000'.$idnum,-6,6); + $newid=$time.'_'.$idnum; + } + $hash{$newid}=$newchat; + my $expired=$time-3600; + foreach (keys %hash) { + my ($thistime)=($_=~/(\d+)\_/); + if ($thistime<$expired) { + delete $hash{$_}; + } + } + untie %hash; + } + { + my $hfh; + if ($hfh=IO::File->new(">>$proname/chatroom.log")) { + print $hfh "$time:".&unescape($newchat)."\n"; + } } - untie %hash; - } } sub unsub { @@ -1630,18 +2447,80 @@ sub unsub { return $result; } +sub currentversion { + my $fname=shift; + my $version=-1; + my $ulsdir=''; + if ($fname=~/^(.+)\/[^\/]+$/) { + $ulsdir=$1; + } + my ($fnamere1,$fnamere2); + # remove version if already specified + $fname=~s/\.\d+\.(\w+(?:\.meta)*)$/\.$1/; + # get the bits that go before and after the version number + if ( $fname=~/^(.*\.)(\w+(?:\.meta)*)$/ ) { + $fnamere1=$1; + $fnamere2='.'.$2; + } + if (-e $fname) { $version=1; } + if (-e $ulsdir) { + if(-d $ulsdir) { + if (opendir(LSDIR,$ulsdir)) { + my $ulsfn; + while ($ulsfn=readdir(LSDIR)) { +# see if this is a regular file (ignore links produced earlier) + my $thisfile=$ulsdir.'/'.$ulsfn; + unless (-l $thisfile) { + if ($thisfile=~/\Q$fnamere1\E(\d+)\Q$fnamere2\E/) { + if ($1>$version) { $version=$1; } + } + } + } + closedir(LSDIR); + $version++; + } + } + } + return $version; +} + +sub thisversion { + my $fname=shift; + my $version=-1; + if ($fname=~/\.(\d+)\.\w+(?:\.meta)*$/) { + $version=$1; + } + return $version; +} + sub subscribe { my ($userinput,$clientip)=@_; my $result; my ($cmd,$fname)=split(/:/,$userinput); my $ownership=&ishome($fname); if ($ownership eq 'owner') { +# explitly asking for the current version? + unless (-e $fname) { + my $currentversion=¤tversion($fname); + if (&thisversion($fname)==$currentversion) { + if ($fname=~/^(.+)\.\d+\.(\w+(?:\.meta)*)$/) { + my $root=$1; + my $extension=$2; + symlink($root.'.'.$extension, + $root.'.'.$currentversion.'.'.$extension); + unless ($extension=~/\.meta$/) { + symlink($root.'.'.$extension.'.meta', + $root.'.'.$currentversion.'.'.$extension.'.meta'); + } + } + } + } if (-e $fname) { if (-d $fname) { $result="directory\n"; } else { if (-e "$fname.$hostid{$clientip}") {&unsub($fname,$clientip);} - $now=time; + my $now=time; my $found=&addline($fname,$hostid{$clientip},$clientip, "$hostid{$clientip}:$clientip:$now\n"); if ($found) { $result="$fname\n"; } @@ -1661,6 +2540,103 @@ sub subscribe { } return $result; } + +sub make_passwd_file { + my ($uname, $umode,$npass,$passfilename)=@_; + my $result="ok\n"; + if ($umode eq 'krb4' or $umode eq 'krb5') { + { + my $pf = IO::File->new(">$passfilename"); + print $pf "$umode:$npass\n"; + } + } elsif ($umode eq 'internal') { + my $salt=time; + $salt=substr($salt,6,2); + my $ncpass=crypt($npass,$salt); + { + &Debug("Creating internal auth"); + my $pf = IO::File->new(">$passfilename"); + print $pf "internal:$ncpass\n"; + } + } elsif ($umode eq 'localauth') { + { + my $pf = IO::File->new(">$passfilename"); + print $pf "localauth:$npass\n"; + } + } elsif ($umode eq 'unix') { + { + my $execpath="$perlvar{'lonDaemons'}/"."lcuseradd"; + { + &Debug("Executing external: ".$execpath); + &Debug("user = ".$uname.", Password =". $npass); + my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log"); + print $se "$uname\n"; + print $se "$npass\n"; + print $se "$npass\n"; + } + my $useraddok = $?; + if($useraddok > 0) { + &logthis("Failed lcuseradd: ".&lcuseraddstrerror($useraddok)); + } + my $pf = IO::File->new(">$passfilename"); + print $pf "unix:\n"; + } + } elsif ($umode eq 'none') { + { + my $pf = IO::File->new(">$passfilename"); + print $pf "none:\n"; + } + } else { + $result="auth_mode_error\n"; + } + return $result; +} + +sub sethost { + my ($remotereq) = @_; + my (undef,$hostid)=split(/:/,$remotereq); + if (!defined($hostid)) { $hostid=$perlvar{'lonHostID'}; } + if ($hostip{$perlvar{'lonHostID'}} eq $hostip{$hostid}) { + $currenthostid=$hostid; + $currentdomainid=$hostdom{$hostid}; + &logthis("Setting hostid to $hostid, and domain to $currentdomainid"); + } else { + &logthis("Requested host id $hostid not an alias of ". + $perlvar{'lonHostID'}." refusing connection"); + return 'unable_to_set'; + } + return 'ok'; +} + +sub version { + my ($userinput)=@_; + $remoteVERSION=(split(/:/,$userinput))[1]; + return "version:$VERSION"; +} + +#There is a copy of this in lonnet.pm +sub userload { + my $numusers=0; + { + opendir(LONIDS,$perlvar{'lonIDsDir'}); + my $filename; + my $curtime=time; + while ($filename=readdir(LONIDS)) { + if ($filename eq '.' || $filename eq '..') {next;} + my ($mtime)=(stat($perlvar{'lonIDsDir'}.'/'.$filename))[9]; + if ($curtime-$mtime < 3600) { $numusers++; } + } + closedir(LONIDS); + } + my $userloadpercent=0; + my $maxuserload=$perlvar{'lonUserLoadLim'}; + if ($maxuserload) { + $userloadpercent=100*$numusers/$maxuserload; + } + $userloadpercent=sprintf("%.2f",$userloadpercent); + return $userloadpercent; +} + # ----------------------------------- POD (plain old documentation, CPAN style) =head1 NAME @@ -1770,6 +2746,17 @@ each connection is logged. =item * +SIGUSR2 + +Parent Signal assignment: + $SIG{USR2} = \&UpdateHosts + +Child signal assignment: + NONE + + +=item * + SIGCHLD Parent signal assignment: @@ -1930,6 +2917,17 @@ Send along temporarily stored informatio List part of a user's directory. +=item pushtable + +Pushes a file in /home/httpd/lonTab directory. Currently limited to: +hosts.tab and domain.tab. The old file is copied to *.tab.backup but +must be restored manually in case of a problem with the new table file. +pushtable requires that the request be encrypted and validated via +ValidateManager. The form of the command is: +enc:pushtable tablename \n +where pushtable, tablename and will be encrypted, but \n is a +cleartext newline. + =item Hanging up (exit or init) What to do when a client tells the server that they (the client) @@ -1940,6 +2938,7 @@ are leaving the network. If B is sent an unknown command (not in the list above), it replys to the client "unknown_cmd". + =item UNKNOWN CLIENT If the anti-spoofing algorithm cannot verify the client, @@ -1959,6 +2958,7 @@ Crypt::IDEA LWP::UserAgent() GDBM_File Authen::Krb4 +Authen::Krb5 =head1 COREQUISITES