--- loncom/lond 2004/02/23 10:25:52 1.178.2.2 +++ loncom/lond 2004/08/10 22:55:31 1.228 @@ -2,7 +2,7 @@ # The LearningOnline Network # lond "LON Daemon" Server (port "LOND" 5663) # -# $Id: lond,v 1.178.2.2 2004/02/23 10:25:52 foxr Exp $ +# $Id: lond,v 1.228 2004/08/10 22:55:31 foxr Exp $ # # Copyright Michigan State University Board of Trustees # @@ -20,7 +20,7 @@ # # You should have received a copy of the GNU General Public License # along with LON-CAPA; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # # /home/httpd/html/adm/gpl.txt # @@ -45,28 +45,35 @@ use Authen::Krb4; use Authen::Krb5; use lib '/home/httpd/lib/perl/'; use localauth; +use localenroll; use File::Copy; use LONCAPA::ConfigFileEdit; +use LONCAPA::lonlocal; +use LONCAPA::lonssl; +use Fcntl qw(:flock); -my $DEBUG = 1; # Non zero to enable debug log entries. +my $DEBUG = 0; # Non zero to enable debug log entries. my $status=''; my $lastlog=''; -my $VERSION='$Revision: 1.178.2.2 $'; #' stupid emacs +my $VERSION='$Revision: 1.228 $'; #' stupid emacs my $remoteVERSION; -my $currenthostid; +my $currenthostid="default"; my $currentdomainid; my $client; -my $clientip; -my $clientname; - -my $cipher; # Cipher key negotiated with client. -my $tmpsnum = 0;; # Id of tmpputs. +my $clientip; # IP address of client. +my $clientdns; # DNS name of client. +my $clientname; # LonCAPA name of client. my $server; -my $thisserver; +my $thisserver; # DNS of us. + +my $keymode; + +my $cipher; # Cipher key negotiated with client +my $tmpsnum = 0; # Id of tmpputs. # # Connection type is: @@ -77,9 +84,10 @@ my $thisserver; my $ConnectionType; -my %hostid; -my %hostdom; -my %hostip; +my %hostid; # ID's for hosts in cluster by ip. +my %hostdom; # LonCAPA domain for hosts in cluster. +my %hostip; # IPs for hosts in cluster. +my %hostdns; # ID's of hosts looked up by DNS name. my %managers; # Ip -> manager names @@ -98,6 +106,7 @@ my $CLIENT_OK = 1; my $MANAGER_OK = 2; my %Dispatcher; + # # The array below are password error strings." # @@ -113,8 +122,10 @@ my @passwderrors = ("ok", "lcpasswd Cannot set new passwd.", "lcpasswd Username has invalid characters", "lcpasswd Invalid characters in password", - "11", "12", - "lcpasswd Password mismatch"); + "lcpasswd User already exists", + "lcpasswd Something went wrong with user addition.", + "lcpasswd Password mismatch", + "lcpasswd Error filename is invalid"); # The array below are lcuseradd error strings.: @@ -135,11 +146,13 @@ my @adderrors = ("ok", "lcuseradd Could not add user.", "lcuseradd Password mismatch"); + + # # Statistics that are maintained and dislayed in the status line. # -my $Transactions; # Number of attempted transactions. -my $Failures; # Number of transcations failed. +my $Transactions = 0; # Number of attempted transactions. +my $Failures = 0; # Number of transcations failed. # ResetStatistics: # Resets the statistics counters: @@ -149,2504 +162,176 @@ sub ResetStatistics { $Failures = 0; } +#------------------------------------------------------------------------ # -# Return true if client is a manager. -# -sub isManager { - return (($ConnectionType eq "manager") || ($ConnectionType eq "both")); -} -# -# Return tru if client can do client functions -# -sub isClient { - return (($ConnectionType eq "client") || ($ConnectionType eq "both")); -} - - -# -# Get a Request: -# Gets a Request message from the client. The transaction -# is defined as a 'line' of text. We remove the new line -# from the text line. -# -sub GetRequest { - my $input = <$client>; - chomp($input); - - Debug("Request = $input\n"); - - &status('Processing '.$clientname.':'.$input); - - return $input; -} -# -# Decipher encoded traffic -# Parameters: -# input - Encoded data. -# Returns: -# Decoded data or undef if encryption key was not yet negotiated. -# Implicit input: -# cipher - This global holds the negotiated encryption key. -# -sub Decipher { - my $input = shift; - my $output = ''; - - - if($cipher) { - my($enc, $enclength, $encinput) = split(/:/, $input); - for(my $encidx = 0; $encidx < length($encinput); $encidx += 16) { - $output .= - $cipher->decrypt(pack("H16", substr($encinput, $encidx, 16))); - } - return substr($output, 0, $enclength); - } else { - return undef; - } - -} - -# -# Register a command processor. This function is invoked to register a sub -# to process a request. Once registered, the ProcessRequest sub can automatically -# dispatch requests to an appropriate sub, and do the top level validity checking -# as well: -# - Is the keyword recognized. -# - Is the proper client type attempting the request. -# - Is the request encrypted if it has to be. -# Parameters: -# $RequestName - Name of the request being registered. -# This is the command request that will match -# against the hash keywords to lookup the information -# associated with the dispatch information. -# $Procedure - Reference to a sub to call to process the request. -# All subs get called as follows: -# Procedure($cmd, $tail, $replyfd, $key) -# $cmd - the actual keyword that invoked us. -# $tail - the tail of the request that invoked us. -# $replyfd- File descriptor connected to the client -# $MustEncode - True if the request must be encoded to be good. -# $ClientOk - True if it's ok for a client to request this. -# $ManagerOk - True if it's ok for a manager to request this. -# Side effects: -# - On success, the Dispatcher hash has an entry added for the key $RequestName -# - On failure, the program will die as it's a bad internal bug to try to -# register a duplicate command handler. -# -sub RegisterHandler { - my $RequestName = shift; - my $Procedure = shift; - my $MustEncode = shift; - my $ClientOk = shift; - my $ManagerOk = shift; - - # Don't allow duplication# - - if (defined $Dispatcher{$RequestName}) { - die "Attempting to define a duplicate request handler for $RequestName\n"; - } - # Build the client type mask: - - my $ClientTypeMask = 0; - if($ClientOk) { - $ClientTypeMask |= $CLIENT_OK; - } - if($ManagerOk) { - $ClientTypeMask |= $MANAGER_OK; - } - - # Enter the hash: - - my @entry = ($Procedure, $MustEncode, $ClientTypeMask); - - $Dispatcher{$RequestName} = \@entry; - - -} - -#--------------------- Request Handlers -------------------------------------------- -# -# By convention each request handler registers itself prior to the sub declaration: -# - -# Handles ping requests. -# Parameters: -# $cmd - the actual keyword that invoked us. -# $tail - the tail of the request that invoked us. -# $replyfd- File descriptor connected to the client -# Implicit Inputs: -# $currenthostid - Global variable that carries the name of the host we are -# known as. -# Returns: -# 1 - Ok to continue processing. -# 0 - Program should exit. -# Side effects: -# Reply information is sent to the client. - -sub PingHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - Reply( $client,"$currenthostid\n","$cmd:$tail"); - - return 1; -} -RegisterHandler("ping", \&PingHandler, 0, 1, 1); # Ping unencoded, client or manager. -# -# Handles pong reequests: -# Parameters: -# $cmd - the actual keyword that invoked us. -# $tail - the tail of the request that invoked us. -# $replyfd- File descriptor connected to the client -# Implicit Inputs: -# $currenthostid - Global variable that carries the name of the host we are -# connected to. -# Returns: -# 1 - Ok to continue processing. -# 0 - Program should exit. -# Side effects: -# Reply information is sent to the client. - -sub PongHandler { - my $cmd = shift; - my $tail = shift; - my $replyfd = shift; - - my $reply=&reply("ping",$clientname); - Reply( $replyfd, "$currenthostid:$reply\n", "$cmd:$tail"); - return 1; -} -RegisterHandler("pong", \&PongHandler, 0, 1, 1); # Pong unencoded, client or manager - -# -# EstablishKeyHandler: -# Called to establish an encrypted session key with the remote client. -# -# Parameters: -# $cmd - the actual keyword that invoked us. -# $tail - the tail of the request that invoked us. -# $replyfd- File descriptor connected to the client -# Implicit Inputs: -# $currenthostid - Global variable that carries the name of the host -# known as. -# $clientname - Global variable that carries the name of the hsot we're connected to. -# Returns: -# 1 - Ok to continue processing. -# 0 - Program should exit. -# Implicit Outputs: -# Reply information is sent to the client. -# $cipher is set with a reference to a new IDEA encryption object. -# -sub EstablishKeyHandler { - my $cmd = shift; - my $tail = shift; - my $replyfd = shift; - - my $buildkey=time.$$.int(rand 100000); - $buildkey=~tr/1-6/A-F/; - $buildkey=int(rand 100000).$buildkey.int(rand 100000); - my $key=$currenthostid.$clientname; - $key=~tr/a-z/A-Z/; - $key=~tr/G-P/0-9/; - $key=~tr/Q-Z/0-9/; - $key=$key.$buildkey.$key.$buildkey.$key.$buildkey; - $key=substr($key,0,32); - my $cipherkey=pack("H32",$key); - $cipher=new IDEA $cipherkey; - Reply($replyfd, "$buildkey\n", "$cmd:$tail"); - - return 1; - -} -RegisterHandler("ekey", \&EstablishKeyHandler, 0, 1,1); - -# LoadHandler: -# Handler for the load command. Returns the current system load average -# to the requestor. -# -# Parameters: -# $cmd - the actual keyword that invoked us. -# $tail - the tail of the request that invoked us. -# $replyfd- File descriptor connected to the client -# Implicit Inputs: -# $currenthostid - Global variable that carries the name of the host -# known as. -# $clientname - Global variable that carries the name of the hsot we're connected to. -# Returns: -# 1 - Ok to continue processing. -# 0 - Program should exit. -# Side effects: -# Reply information is sent to the client. -sub LoadHandler { - my $cmd = shift; - my $tail = shift; - my $replyfd = shift; - - # Get the load average from /proc/loadavg and calculate it as a percentage of - # the allowed load limit as set by the perl global variable lonLoadLim - - my $loadavg; - my $loadfile=IO::File->new('/proc/loadavg'); - - $loadavg=<$loadfile>; - $loadavg =~ s/\s.*//g; # Extract the first field only. - - my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'}; - - Reply( $replyfd, "$loadpercent\n", "$cmd:$tail"); - - return 1; -} -RegisterHandler("load", \&LoadHandler, 0, 1, 0); - - -# -# Process the userload request. This sub returns to the client the current -# user load average. It can be invoked either by clients or managers. -# -# Parameters: -# $cmd - the actual keyword that invoked us. -# $tail - the tail of the request that invoked us. -# $replyfd- File descriptor connected to the client -# Implicit Inputs: -# $currenthostid - Global variable that carries the name of the host -# known as. -# $clientname - Global variable that carries the name of the hsot we're connected to. -# Returns: -# 1 - Ok to continue processing. -# 0 - Program should exit -# Implicit inputs: -# whatever the userload() function requires. -# Implicit outputs: -# the reply is written to the client. -# -sub UserLoadHandler { - my $cmd = shift; - my $tail = shift; - my $replyfd = shift; - - my $userloadpercent=&userload(); - Reply($replyfd, "$userloadpercent\n", "$cmd:$tail"); - - return 1; -} -RegisterHandler("userload", \&UserLoadHandler, 0, 1, 0); - -# Process a request for the authorization type of a user: -# (userauth). -# -# Parameters: -# $cmd - the actual keyword that invoked us. -# $tail - the tail of the request that invoked us. -# $replyfd- File descriptor connected to the client -# Returns: -# 1 - Ok to continue processing. -# 0 - Program should exit -# Implicit outputs: -# The user authorization type is written to the client. -# -sub UserAuthorizationType { - my $cmd = shift; - my $tail = shift; - my $replyfd = shift; - - my $userinput = "$cmd:$tail"; - - # Pull the domain and username out of the command tail. - # and call GetAuthType to determine the authentication type. - - my ($udom,$uname)=split(/:/,$tail); - my $result = GetAuthType($udom, $uname); - if($result eq "nouser") { - Failure( $replyfd, "unknown_user\n", $userinput); - } else { - Reply( $replyfd, "$result\n", $userinput); - } - - return 1; -} -RegisterHandler("currentauth", \&UserAuthorizationType, 1, 1, 0); -# -# Process a request by a manager to push a hosts or domain table -# to us. We pick apart the command and pass it on to the subs -# that already exist to do this. -# -# Parameters: -# $cmd - the actual keyword that invoked us. -# $tail - the tail of the request that invoked us. -# $client - File descriptor connected to the client -# Returns: -# 1 - Ok to continue processing. -# 0 - Program should exit -# Implicit Output: -# a reply is written to the client. - -sub PushFileHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - # At this time we only know that the IP of our partner is a valid manager - # the code below is a hook to do further authentication (e.g. to resolve - # spoofing). - - my $cert = GetCertificate($userinput); - if(ValidManager($cert)) { - - # Now presumably we have the bona fides of both the peer host and the - # process making the request. - - my $reply = PushFile($userinput); - Reply($client, "$reply\n", $userinput); - - } else { - Failure( $client, "refused\n", $userinput); - } -} -RegisterHandler("pushfile", \&PushFileHandler, 1, 0, 1); - - - -# Process a reinit request. Reinit requests that either -# lonc or lond be reinitialized so that an updated -# host.tab or domain.tab can be processed. -# -# Parameters: -# $cmd - the actual keyword that invoked us. -# $tail - the tail of the request that invoked us. -# $client - File descriptor connected to the client -# Returns: -# 1 - Ok to continue processing. -# 0 - Program should exit -# Implicit output: -# a reply is sent to the client. -# -sub ReinitProcessHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my $cert = GetCertificate($userinput); - if(ValidManager($cert)) { - chomp($userinput); - my $reply = ReinitProcess($userinput); - Reply( $client, "$reply\n", $userinput); - } else { - Failure( $client, "refused\n", $userinput); - } - return 1; -} - -RegisterHandler("reinit", \&ReinitProcessHandler, 1, 0, 1); - -# Process the editing script for a table edit operation. -# the editing operation must be encrypted and requested by -# a manager host. -# -# Parameters: -# $cmd - the actual keyword that invoked us. -# $tail - the tail of the request that invoked us. -# $client - File descriptor connected to the client -# Returns: -# 1 - Ok to continue processing. -# 0 - Program should exit -# Implicit output: -# a reply is sent to the client. -# -sub EditTableHandler { - my $command = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$command:$tail"; - - my $cert = GetCertificate($userinput); - if(ValidManager($cert)) { - my($filetype, $script) = split(/:/, $tail); - if (($filetype eq "hosts") || - ($filetype eq "domain")) { - if($script ne "") { - Reply($client, # BUGBUG - EditFile - EditFile($userinput), # could fail. - $userinput); - } else { - Failure($client,"refused\n",$userinput); - } - } else { - Failure($client,"refused\n",$userinput); - } - } else { - Failure($client,"refused\n",$userinput); - } - return 1; -} -RegisterHandler("edit", \&EditTableHandler, 1, 0, 1); - - -# -# Authenticate a user against the LonCAPA authentication -# database. Note that there are several authentication -# possibilities: -# - unix - The user can be authenticated against the unix -# password file. -# - internal - The user can be authenticated against a purely -# internal per user password file. -# - kerberos - The user can be authenticated against either a kerb4 or kerb5 -# ticket granting authority. -# - user - The person tailoring LonCAPA can supply a user authentication mechanism -# that is per system. +# LocalConnection +# Completes the formation of a locally authenticated connection. +# This function will ensure that the 'remote' client is really the +# local host. If not, the connection is closed, and the function fails. +# If so, initcmd is parsed for the name of a file containing the +# IDEA session key. The fie is opened, read, deleted and the session +# key returned to the caller. # # Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -# Implicit inputs: -# The authentication systems describe above have their own forms of implicit -# input into the authentication process that are described above. +# $Socket - Socket open on client. +# $initcmd - The full text of the init command. # -sub AuthenticateHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - # Regenerate the full input line - - my $userinput = $cmd.":".$tail; - - # udom - User's domain. - # uname - Username. - # upass - User's password. - - my ($udom,$uname,$upass)=split(/:/,$tail); - Debug(" Authenticate domain = $udom, user = $uname, password = $upass"); - chomp($upass); - $upass=unescape($upass); - my $proname=propath($udom,$uname); - my $passfilename="$proname/passwd"; - - # The user's 'personal' loncapa passworrd file describes how to authenticate: - - if (-e $passfilename) { - Debug("Located password file: $passfilename"); - - my $pf = IO::File->new($passfilename); - my $realpasswd=<$pf>; - chomp($realpasswd); - my ($howpwd,$contentpwd)=split(/:/,$realpasswd); - my $pwdcorrect=0; - # - # Authenticate against password stored in the internal file. - # - Debug("Authenticating via $howpwd"); - if ($howpwd eq 'internal') { - &Debug("Internal auth"); - $pwdcorrect= (crypt($upass,$contentpwd) eq $contentpwd); - # - # Authenticate against the unix password file. - # - } elsif ($howpwd eq 'unix') { - &Debug("Unix auth"); - if((getpwnam($uname))[1] eq "") { #no such user! - $pwdcorrect = 0; - } else { - $contentpwd=(getpwnam($uname))[1]; - my $pwauth_path="/usr/local/sbin/pwauth"; - unless ($contentpwd eq 'x') { - $pwdcorrect= (crypt($upass,$contentpwd) eq $contentpwd); - } elsif (-e $pwauth_path) { - open PWAUTH, "|$pwauth_path" or - die "Cannot invoke authentication"; - print PWAUTH "$uname\n$upass\n"; - close PWAUTH; - $pwdcorrect=!$?; - } - } - # - # Authenticate against a Kerberos 4 server: - # - } elsif ($howpwd eq 'krb4') { - my $null=pack("C",0); - unless ($upass=~/$null/) { - my $krb4_error = &Authen::Krb4::get_pw_in_tkt($uname, - "", - $contentpwd, - 'krbtgt', - $contentpwd, - 1, - $upass); - if (!$krb4_error) { - $pwdcorrect = 1; - } else { - $pwdcorrect=0; - # log error if it is not a bad password - if ($krb4_error != 62) { - &logthis('krb4:'.$uname.','.$contentpwd.','. - &Authen::Krb4::get_err_txt($Authen::Krb4::error)); - } - } - } - # - # Authenticate against a Kerberos 5 server: - # - } elsif ($howpwd eq 'krb5') { - my $null=pack("C",0); - unless ($upass=~/$null/) { - my $krbclient=&Authen::Krb5::parse_name($uname.'@'.$contentpwd); - my $krbservice="krbtgt/".$contentpwd."\@".$contentpwd; - my $krbserver=&Authen::Krb5::parse_name($krbservice); - my $credentials=&Authen::Krb5::cc_default(); - $credentials->initialize($krbclient); - my $krbreturn = &Authen::Krb5::get_in_tkt_with_password( - $krbclient, - $krbserver, - $upass, - $credentials); - $pwdcorrect = ($krbreturn == 1); - } else { - $pwdcorrect=0; - } - # - # Finally, the user may have written in an authentication module. - # in that case, if requested, authenticate against it. - # - } elsif ($howpwd eq 'localauth') { - $pwdcorrect=&localauth::localauth($uname,$upass,$contentpwd); - } - # - # Successfully authorized. - # - if ($pwdcorrect) { - Reply( $client, "authorized\n", $userinput); - # - # Bad credentials: Failed to authorize - # - } else { - Failure( $client, "non_authorized\n", $userinput); - } - # - # User bad... note it may be bad security practice to differntiate to the - # caller a bad user from a bad passwd... since that supplies covert channel - # information (you have a good user but bad password e.g.) to guessers. - # - } else { - Failure( $client, "unknown_user\n", $userinput); - } - return 1; -} -RegisterHandler("auth", \&AuthenticateHandler, 1, 1, 0); - -# -# Change a user's password. Note that this function is complicated by -# the fact that a user may be authenticated in more than one way: -# At present, we are not able to change the password for all types of -# authentication methods. Only for: -# unix - unix password or shadow passoword style authentication. -# local - Locally written authentication mechanism. -# For now, kerb4 and kerb5 password changes are not supported and result -# in an error. -# FUTURE WORK: -# Support kerberos passwd changes? -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. # Implicit inputs: -# The authentication systems describe above have their own forms of implicit -# input into the authentication process that are described above. -sub ChangePasswordHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = $cmd.":".$tail; # Reconstruct client's string. - - # - # udom - user's domain. - # uname - Username. - # upass - Current password. - # npass - New password. - - my ($udom,$uname,$upass,$npass)=split(/:/,$tail); - chomp($npass); - $upass=&unescape($upass); - $npass=&unescape($npass); - &Debug("Trying to change password for $uname"); - my $proname=propath($udom,$uname); - my $passfilename="$proname/passwd"; - if (-e $passfilename) { - my $realpasswd; - { - my $pf = IO::File->new($passfilename); - $realpasswd=<$pf>; - } - chomp($realpasswd); - my ($howpwd,$contentpwd)=split(/:/,$realpasswd); - if ($howpwd eq 'internal') { - &Debug("internal auth"); - if (crypt($upass,$contentpwd) eq $contentpwd) { - my $salt=time; - $salt=substr($salt,6,2); - my $ncpass=crypt($npass,$salt); - { - my $pf = IO::File->new(">$passfilename"); - if ($pf) { - print $pf "internal:$ncpass\n"; - &logthis("Result of password change for " - ."$uname: pwchange_success"); - Reply($client, "ok\n", $userinput); - } else { - &logthis("Unable to open $uname passwd " - ."to change password"); - Failure( $client, "non_authorized\n",$userinput); - } - } - } else { - Failure($client, "non_authorized\n", $userinput); - } - } elsif ($howpwd eq 'unix') { - # Unix means we have to access /etc/password - # one way or another. - # First: Make sure the current password is - # correct - &Debug("auth is unix"); - $contentpwd=(getpwnam($uname))[1]; - my $pwdcorrect = "0"; - my $pwauth_path="/usr/local/sbin/pwauth"; - unless ($contentpwd eq 'x') { - $pwdcorrect= (crypt($upass,$contentpwd) eq $contentpwd); - } elsif (-e $pwauth_path) { - open PWAUTH, "|$pwauth_path" or - die "Cannot invoke authentication"; - print PWAUTH "$uname\n$upass\n"; - close PWAUTH; - &Debug("exited pwauth with $? ($uname,$upass) "); - $pwdcorrect=($? == 0); - } - if ($pwdcorrect) { - my $execdir=$perlvar{'lonDaemons'}; - &Debug("Opening lcpasswd pipeline"); - my $pf = IO::File->new("|$execdir/lcpasswd > " - ."$perlvar{'lonDaemons'}" - ."/logs/lcpasswd.log"); - print $pf "$uname\n$npass\n$npass\n"; - close $pf; - my $err = $?; - my $result = ($err>0 ? 'pwchange_failure' : 'ok'); - &logthis("Result of password change for $uname: ". - &lcpasswdstrerror($?)); - Reply($client, "$result\n", $userinput); - } else { - Reply($client, "non_authorized\n", $userinput); - } - } else { - Reply( $client, "auth_mode_error\n", $userinput); - } - } else { - Reply( $client, "unknown_user\n", $userinput); - } - return 1; -} -RegisterHandler("passwd", \&ChangePasswordHandler, 1, 1, 0); - -# -# Create a new user. User in this case means a lon-capa user. -# The user must either already exist in some authentication realm -# like kerberos or the /etc/passwd. If not, a user completely local to -# this loncapa system is created. +# $clientdns - The DNS name of the remote client. +# $thisserver - Our DNS name. # -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -# Implicit inputs: -# The authentication systems describe above have their own forms of implicit -# input into the authentication process that are described above. -sub AddUserHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = $cmd.":".$tail; - - my $oldumask=umask(0077); - my ($udom,$uname,$umode,$npass)=split(/:/,$tail); - &Debug("cmd =".$cmd." $udom =".$udom." uname=".$uname); - chomp($npass); - $npass=&unescape($npass); - my $proname=propath($udom,$uname); - my $passfilename="$proname/passwd"; - &Debug("Password file created will be:".$passfilename); - if (-e $passfilename) { - Failure( $client, "already_exists\n", $userinput); - } elsif ($udom ne $currentdomainid) { - Failure($client, "not_right_domain\n", $userinput); - } else { - my @fpparts=split(/\//,$proname); - my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2]; - my $fperror=''; - for (my $i=3;$i<=$#fpparts;$i++) { - $fpnow.='/'.$fpparts[$i]; - unless (-e $fpnow) { - unless (mkdir($fpnow,0777)) { - $fperror="error: ".($!+0)." mkdir failed while attempting " - ."makeuser"; - } - } - } - unless ($fperror) { - my $result=&make_passwd_file($uname, $umode,$npass, $passfilename); - Reply($client, $result, $userinput); #BUGBUG - could be fail - } else { - Failure($client, "$fperror\n", $userinput); - } - } - umask($oldumask); - return 1; - -} -RegisterHandler("makeuser", \&AddUserHandler, 1, 1, 0); - -# -# Change the authentication method of a user. Note that this may -# also implicitly change the user's password if, for example, the user is -# joining an existing authentication realm. Known authentication realms at -# this time are: -# internal - Purely internal password file (only loncapa knows this user) -# local - Institutionally written authentication module. -# unix - Unix user (/etc/passwd with or without /etc/shadow). -# kerb4 - kerberos version 4 -# kerb5 - kerberos version 5 -# -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -# Implicit inputs: -# The authentication systems describe above have their own forms of implicit -# input into the authentication process that are described above. -# -sub ChangeAuthenticationHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; # Reconstruct user input. - - my ($udom,$uname,$umode,$npass)=split(/:/,$tail); - chomp($npass); - &Debug("cmd = ".$cmd." domain= ".$udom."uname =".$uname." umode= ".$umode); - $npass=&unescape($npass); - my $proname=&propath($udom,$uname); - my $passfilename="$proname/passwd"; - if ($udom ne $currentdomainid) { - Failure( $client, "not_right_domain\n", $client); - } else { - my $result=&make_passwd_file($uname, $umode,$npass,$passfilename); - Reply($client, $result, $userinput); - } - return 1; -} -RegisterHandler("changeuserauth", \&ChangeAuthenticationHandler, 1,1, 0); - -# -# Determines if this is the home server for a user. The home server -# for a user will have his/her lon-capa passwd file. Therefore all we need -# to do is determine if this file exists. -# -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -# Implicit inputs: -# The authentication systems describe above have their own forms of implicit -# input into the authentication process that are described above. -# -sub IsHomeHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($udom,$uname)=split(/:/,$tail); - chomp($uname); - my $proname=propath($udom,$uname); - if (-e $proname) { - Reply( $client, "found\n", $userinput); - } else { - Failure($client, "not_found\n", $userinput); - } - return 1; -} -RegisterHandler("home", \&IsHomeHandler, 0,1,0); -# -# Process an update request for a resource?? I think what's going on here is -# that a resource has been modified that we hold a subscription to. -# If the resource is not local, then we must update, or at least invalidate our -# cached copy of the resource. -# FUTURE WORK: -# I need to look at this logic carefully. My druthers would be to follow -# typical caching logic, and simple invalidate the cache, drop any subscription -# an let the next fetch start the ball rolling again... however that may -# actually be more difficult than it looks given the complex web of -# proxy servers. -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -# Implicit inputs: -# The authentication systems describe above have their own forms of implicit -# input into the authentication process that are described above. -# -sub UpdateResourceHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my $fname=$tail; - my $ownership=ishome($fname); - if ($ownership eq 'not_owner') { - if (-e $fname) { - my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, - $atime,$mtime,$ctime,$blksize,$blocks)=stat($fname); - my $now=time; - my $since=$now-$atime; - if ($since>$perlvar{'lonExpire'}) { - my $reply=&reply("unsub:$fname","$clientname"); - unlink("$fname"); - } else { - my $transname="$fname.in.transfer"; - my $remoteurl=&reply("sub:$fname","$clientname"); - my $response; - alarm(120); - { - my $ua=new LWP::UserAgent; - my $request=new HTTP::Request('GET',"$remoteurl"); - $response=$ua->request($request,$transname); - } - alarm(0); - if ($response->is_error()) { - unlink($transname); - my $message=$response->status_line; - &logthis("LWP GET: $message for $fname ($remoteurl)"); - } else { - if ($remoteurl!~/\.meta$/) { - alarm(120); - { - my $ua=new LWP::UserAgent; - my $mrequest=new HTTP::Request('GET',$remoteurl.'.meta'); - my $mresponse=$ua->request($mrequest,$fname.'.meta'); - if ($mresponse->is_error()) { - unlink($fname.'.meta'); - } - } - alarm(0); - } - rename($transname,$fname); - } - } - Reply( $client, "ok\n", $userinput); - } else { - Failure($client, "not_found\n", $userinput); - } - } else { - Failure($client, "rejected\n", $userinput); - } - return 1; -} -RegisterHandler("update", \&UpdateResourceHandler, 0 ,1, 0); - -# -# Fetch a user file from a remote server: -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -# -sub FetchUserFileHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - my $fname = $tail; - my ($udom,$uname,$ufile)=split(/\//,$fname); - my $udir=propath($udom,$uname).'/userfiles'; - unless (-e $udir) { - mkdir($udir,0770); - } - if (-e $udir) { - $ufile=~s/^[\.\~]+//; - $ufile=~s/\///g; - my $destname=$udir.'/'.$ufile; - my $transname=$udir.'/'.$ufile.'.in.transit'; - my $remoteurl='http://'.$clientip.'/userfiles/'.$fname; - my $response; - alarm(120); - { - my $ua=new LWP::UserAgent; - my $request=new HTTP::Request('GET',"$remoteurl"); - $response=$ua->request($request,$transname); - } - alarm(0); - if ($response->is_error()) { - unlink($transname); - my $message=$response->status_line; - &logthis("LWP GET: $message for $fname ($remoteurl)"); - Failure($client, "failed\n", $userinput); - } else { - if (!rename($transname,$destname)) { - &logthis("Unable to move $transname to $destname"); - unlink($transname); - Failure($client, "failed\n", $userinput); - } else { - Reply($client, "ok\n", $userinput); - } - } - } else { - Failure($client, "not_home\n", $userinput); - } - return 1; -} -RegisterHandler("fetchuserfile", \&FetchUserFileHandler, 0, 1, 0); -# -# Authenticate access to a user file. Question? The token for athentication -# is allowed to be sent as cleartext is this really what we want? This token -# represents the user's session id. Once it is forged does this allow too much access?? -# -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -sub AuthenticateUserFileAccess { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; - - my ($fname,$session)=split(/:/,$tail); - chomp($session); - my $reply='non_auth'; - if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'.$session.'.id')) { - while (my $line=) { - if ($line=~/userfile\.$fname\=/) { - $reply='ok'; - } - } - close(ENVIN); - Reply($client, $reply."\n", $userinput); - } else { - Failure($client, "invalid_token\n", $userinput); - } - return 1; - -} -RegisterHandler("tokenauthuserfile", \&AuthenticateUserFileAccess, 0, 1, 0); -# -# Unsubscribe from a resource. -# -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -# -sub UnsubscribeHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput= "$cmd:$tail"; - - my $fname = $tail; - if (-e $fname) { - Reply($client, &unsub($client,$fname,$clientip), $userinput); - } else { - Failure($client, "not_found\n", $userinput); - } - return 1; -} -RegisterHandler("unusb", \&UnsubscribeHandler, 0, 1, 0); - -# Subscribe to a resource. -# -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -# -sub SubscribeHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; - - Reply( $client, &subscribe($userinput,$clientip), $userinput); - - return 1; -} -RegisterHandler("sub", \&SubscribeHandler, 0, 1, 0); - -# -# Determine the version of a resource (?) Or is it return -# the top version of the resource? Not yet clear from the -# code in currentversion. -# -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -# -sub CurrentVersionHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput= "$cmd:$tail"; - - my $fname = $tail; - Reply( $client, ¤tversion($fname)."\n", $userinput); - return 1; - -} -RegisterHandler("currentversion", \&CurrentVersionHandler, 0, 1, 0); - - -# Make an entry in a user's activity log. -# -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -# -sub ActivityLogEntryHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput= "$cmd:$tail"; - - my ($udom,$uname,$what)=split(/:/,$tail); - chomp($what); - my $proname=propath($udom,$uname); - my $now=time; - my $hfh; - if ($hfh=IO::File->new(">>$proname/activity.log")) { - print $hfh "$now:$clientname:$what\n"; - Reply( $client, "ok\n", $userinput); - } else { - Reply($client, "error: ".($!+0)." IO::File->new Failed " - ."while attempting log\n", - $userinput); - } - - return 1; -} -RegisterHandler("log", \&ActivityLogEntryHandler, 0, 1, 0); -# -# Put a namespace entry in a user profile hash. -# My druthers would be for this to be an encrypted interaction too. -# anything that might be an inadvertent covert channel about either -# user authentication or user personal information.... -# -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -# -sub PutUserProfileEntry { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; - - my ($udom,$uname,$namespace,$what) =split(/:/,$tail); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - if ($namespace ne 'roles') { - chomp($what); - my $proname=propath($udom,$uname); - my $now=time; - unless ($namespace=~/^nohist\_/) { - my $hfh; - if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { - print $hfh "P:$now:$what\n"; - } - } - my @pairs=split(/\&/,$what); - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db", - &GDBM_WRCREAT(),0640)) { - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - $hash{$key}=$value; - } - if (untie(%hash)) { - Reply( $client, "ok\n", $userinput); - } else { - Failure($client, "error: ".($!+0)." untie(GDBM) failed ". - "while attempting put\n", - $userinput); - } - } else { - Failure( $client, "error: ".($!)." tie(GDBM) Failed ". - "while attempting put\n", $userinput); - } - } else { - Failure( $client, "refused\n", $userinput); - } - - return 1; -} -RegisterHandler("put", \&PutUserProfileEntry, 0, 1, 0); - -# -# Increment a profile entry in the user history file. -# The history contains keyword value pairs. In this case, -# The value itself is a pair of numbers. The first, the current value -# the second an increment that this function applies to the current -# value. -# -# Parameters: -# $cmd - The command that got us here. -# $tail - Tail of the command (remaining parameters). -# $client - File descriptor connected to client. -# Returns -# 0 - Requested to exit, caller should shut down. -# 1 - Continue processing. -# -sub IncrementUserValueHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = shift; - - my ($udom,$uname,$namespace,$what) =split(/:/,$tail); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - if ($namespace ne 'roles') { - chomp($what); - my $proname=propath($udom,$uname); - my $now=time; - unless ($namespace=~/^nohist\_/) { - my $hfh; - if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { - print $hfh "P:$now:$what\n"; - } - } - my @pairs=split(/\&/,$what); - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(), - 0640)) { - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - # We could check that we have a number... - if (! defined($value) || $value eq '') { - $value = 1; - } - $hash{$key}+=$value; - } - if (untie(%hash)) { - Reply( $client, "ok\n", $userinput); - } else { - Failure($client, "error: ".($!+0)." untie(GDBM) failed ". - "while attempting put\n", $userinput); - } - } else { - Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting put\n", $userinput); - } - } else { - Failure($client, "refused\n", $userinput); - } - - return 1; -} -RegisterHandler("inc", \&IncrementUserValueHandler, 0, 1, 0); -# -# Put a new role for a user. Roles are LonCAPA's packaging of permissions. -# Each 'role' a user has implies a set of permissions. Adding a new role -# for a person grants the permissions packaged with that role -# to that user when the role is selected. -# -# Parameters: -# $cmd - The command string (rolesput). -# $tail - The remainder of the request line. For rolesput this -# consists of a colon separated list that contains: -# The domain and user that is granting the role (logged). -# The domain and user that is getting the role. -# The roles being granted as a set of & separated pairs. -# each pair a key value pair. -# $client - File descriptor connected to the client. # Returns: -# 0 - If the daemon should exit -# 1 - To continue processing. -# +# IDEA session key on success. +# undef on failure. # -sub RolesPutHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; - - my ($exedom,$exeuser,$udom,$uname,$what) =split(/:/,$tail); - &Debug("cmd = ".$cmd." exedom= ".$exedom."user = ".$exeuser." udom=".$udom. - "what = ".$what); - my $namespace='roles'; - chomp($what); - my $proname=propath($udom,$uname); - my $now=time; - # - # Log the attempt to set a role. The {}'s here ensure that the file - # handle is open for the minimal amount of time. Since the flush - # is done on close this improves the chances the log will be an un- - # corrupted ordered thing. - { - my $hfh; - if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { - print $hfh "P:$now:$exedom:$exeuser:$what\n"; - } - } - my @pairs=split(/\&/,$what); - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db", &GDBM_WRCREAT(),0640)) { - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - &ManagePermissions($key, $udom, $uname, - &GetAuthType( $udom, $uname)); - $hash{$key}=$value; - } - if (untie(%hash)) { - Reply($client, "ok\n", $userinput); - } else { - Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting rolesput\n", $userinput); - } - } else { - Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting rolesput\n", $userinput); - } - return 1; -} -RegisterHandler("rolesput", \&RolesPutHandler, 1,1,0); # Encoded client only. -# -# Deletes (removes) a role for a user. This is equivalent to removing -# a permissions package associated with the role from the user's profile. -# -# Parameters: -# $cmd - The command (rolesdel) -# $tail - The remainder of the request line. This consists -# of: -# The domain and user requesting the change (logged) -# The domain and user being changed. -# The roles being revoked. These are shipped to us -# as a bunch of & separated role name keywords. -# $client - The file handle open on the client. -# Returns: -# 1 - Continue processing -# 0 - Exit. -# -sub RolesDeleteHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; - - my ($exedom,$exeuser,$udom,$uname,$what)=split(/:/,$tail); - &Debug("cmd = ".$cmd." exedom= ".$exedom."user = ".$exeuser." udom=".$udom. - "what = ".$what); - my $namespace='roles'; - chomp($what); - my $proname=propath($udom,$uname); - my $now=time; - # - # Log the attempt. This {}'ing is done to ensure that the - # logfile is flushed and closed as quickly as possible. Hopefully - # this preserves both time ordering and reduces the probability that - # messages will be interleaved. - # - { - my $hfh; - if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { - print $hfh "D:$now:$exedom:$exeuser:$what\n"; - } - } - my @rolekeys=split(/\&/,$what); - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db", &GDBM_WRCREAT(),0640)) { - foreach my $key (@rolekeys) { - delete $hash{$key}; - } - if (untie(%hash)) { - Reply($client, "ok\n", $userinput); - } else { - Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting rolesdel\n", $userinput); - } - } else { - Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting rolesdel\n", $userinput); - } - - return 1; -} -RegisterHandler("rolesdel", \&RolesDeleteHandler, 1,1, 0); # Encoded client only +sub LocalConnection { + my ($Socket, $initcmd) = @_; + Debug("Attempting local connection: $initcmd client: $clientdns me: $thisserver"); + if($clientdns ne $thisserver) { + &logthis(' LocalConnection rejecting non local: ' + ."$clientdns ne $thisserver "); + close $Socket; + return undef; + } else { + chomp($initcmd); # Get rid of \n in filename. + my ($init, $type, $name) = split(/:/, $initcmd); + Debug(" Init command: $init $type $name "); + + # Require that $init = init, and $type = local: Otherwise + # the caller is insane: + + if(($init ne "init") && ($type ne "local")) { + &logthis(' LocalConnection: caller is insane! ' + ."init = $init, and type = $type "); + close($Socket);; + return undef; + + } + # Now get the key filename: -# Unencrypted get from a user's profile database. See -# GetProfileEntryEncrypted for a version that does end-to-end encryption. -# This function retrieves a keyed item from a specific named database in the -# user's directory. -# -# Parameters: -# $cmd - Command request keyword (get). -# $tail - Tail of the command. This is a colon separated list -# consisting of the domain and username that uniquely -# identifies the profile, -# The 'namespace' which selects the gdbm file to -# do the lookup in, -# & separated list of keys to lookup. Note that -# the values are returned as an & separated list too. -# $client - File descriptor open on the client. -# Returns: -# 1 - Continue processing. -# 0 - Exit. -# -sub GetProfileEntry { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput= "$cmd:$tail"; - - my ($udom,$uname,$namespace,$what) = split(/:/,$tail); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - chomp($what); - my @queries=split(/\&/,$what); - my $proname=propath($udom,$uname); - my $qresult=''; - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db", &GDBM_READER(),0640)) { - for (my $i=0;$i<=$#queries;$i++) { - $qresult.="$hash{$queries[$i]}&"; # Presumably failure gives empty string. - } - if (untie(%hash)) { - $qresult=~s/\&$//; # Remove trailing & from last lookup. - Reply($client, "$qresult\n", $userinput); - } else { - Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting get\n", $userinput); - } - } else { - if ($!+0 == 2) { # +0 coerces errno -> number 2 is ENOENT - Failure($client, "error:No such file or ". - "GDBM reported bad block error\n", $userinput); - } else { # Some other undifferentiated err. - Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting get\n", $userinput); - } - } - return 1; + my $IDEAKey = lonlocal::ReadKeyFile($name); + return $IDEAKey; + } } -RegisterHandler("get", \&GetProfileEntry, 0,1,0); -# -# Process the encrypted get request. Note that the request is sent -# in clear, but the reply is encrypted. This is a small covert channel: -# information about the sensitive keys is given to the snooper. Just not -# information about the values of the sensitive key. Hmm if I wanted to -# know these I'd snoop for the egets. Get the profile item names from them -# and then issue a get for them since there's no enforcement of the -# requirement of an encrypted get for particular profile items. If I -# were re-doing this, I'd force the request to be encrypted as well as the -# reply. I'd also just enforce encrypted transactions for all gets since -# that would prevent any covert channel snooping. +#------------------------------------------------------------------------------ # -# Parameters: -# $cmd - Command keyword of request (eget). -# $tail - Tail of the command. See GetProfileEntry # for more information about this. -# $client - File open on the client. -# Returns: -# 1 - Continue processing -# 0 - server should exit. -sub GetProfileEntryEncrypted { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; - - my ($cmd,$udom,$uname,$namespace,$what) = split(/:/,$userinput); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - chomp($what); - my @queries=split(/\&/,$what); - my $proname=propath($udom,$uname); - my $qresult=''; - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { - for (my $i=0;$i<=$#queries;$i++) { - $qresult.="$hash{$queries[$i]}&"; - } - if (untie(%hash)) { - $qresult=~s/\&$//; - if ($cipher) { - my $cmdlength=length($qresult); - $qresult.=" "; - my $encqresult=''; - for(my $encidx=0;$encidx<=$cmdlength;$encidx+=8) { - $encqresult.= unpack("H16", $cipher->encrypt(substr($qresult, - $encidx, - 8))); - } - Reply( $client, "enc:$cmdlength:$encqresult\n", $userinput); - } else { - Failure( $client, "error:no_key\n", $userinput); - } - } else { - Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting eget\n", $userinput); - } - } else { - Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting eget\n", $userinput); - } - - return 1; -} -RegisterHandler("eget", \&GetProfileEncrypted, 0, 1, 0); - +# SSLConnection +# Completes the formation of an ssh authenticated connection. The +# socket is promoted to an ssl socket. If this promotion and the associated +# certificate exchange are successful, the IDEA key is generated and sent +# to the remote peer via the SSL tunnel. The IDEA key is also returned to +# the caller after the SSL tunnel is torn down. # -# Deletes a key in a user profile database. -# -# Parameters: -# $cmd - Command keyword (del). -# $tail - Command tail. IN this case a colon -# separated list containing: -# The domain and user that identifies uniquely -# the identity of the user. -# The profile namespace (name of the profile -# database file). -# & separated list of keywords to delete. -# $client - File open on client socket. -# Returns: -# 1 - Continue processing -# 0 - Exit server. -# -# -sub DeletProfileEntry { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "cmd:$tail"; - - my ($udom,$uname,$namespace,$what) = split(/:/,$tail); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - chomp($what); - my $proname=propath($udom,$uname); - my $now=time; - unless ($namespace=~/^nohist\_/) { - my $hfh; - if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { - print $hfh "D:$now:$what\n"; - } - } - my @keys=split(/\&/,$what); - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { - foreach my $key (@keys) { - delete($hash{$key}); - } - if (untie(%hash)) { - Reply($client, "ok\n", $userinput); - } else { - Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting del\n", $userinput); - } - } else { - Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting del\n", $userinput); - } - return 1; -} -RegisterHandler("del", \&DeleteProfileEntry, 0, 1, 0); -# -# List the set of keys that are defined in a profile database file. -# A successful reply from this will contain an & separated list of -# the keys. # Parameters: -# $cmd - Command request (keys). -# $tail - Remainder of the request, a colon separated -# list containing domain/user that identifies the -# user being queried, and the database namespace -# (database filename essentially). -# $client - File open on the client. -# Returns: -# 1 - Continue processing. -# 0 - Exit the server. +# Name Type Purpose +# $Socket IO::Socket::INET Plaintext socket. # -sub GetProfileKeys { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; - - my ($udom,$uname,$namespace)=split(/:/,$tail); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - my $proname=propath($udom,$uname); - my $qresult=''; - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { - foreach my $key (keys %hash) { - $qresult.="$key&"; - } - if (untie(%hash)) { - $qresult=~s/\&$//; - Reply($client, "$qresult\n", $userinput); - } else { - Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting keys\n", $userinput); - } - } else { - Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting keys\n", $userinput); - } - - return 1; -} -RegisterHandler("keys", \&GetProfileKeys, 0, 1, 0); -# -# Dump the contents of a user profile database. -# Note that this constitutes a very large covert channel too since -# the dump will return sensitive information that is not encrypted. -# The naive security assumption is that the session negotiation ensures -# our client is trusted and I don't believe that's assured at present. -# Sure want badly to go to ssl or tls. Of course if my peer isn't really -# a LonCAPA node they could have negotiated an encryption key too so >sigh<. -# -# Parameters: -# $cmd - The command request keyword (currentdump). -# $tail - Remainder of the request, consisting of a colon -# separated list that has the domain/username and -# the namespace to dump (database file). -# $client - file open on the remote client. # Returns: -# 1 - Continue processing. -# 0 - Exit the server. +# IDEA key on success. +# undef on failure. # -sub DumpProfileDatabase { - my $cmd = shift; - my $tail = shift; - my $client = shift; - my $userinput = "$cmd:$tail"; - - my ($udom,$uname,$namespace) = split(/:/,$tail); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - my $qresult=''; - my $proname=propath($udom,$uname); - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db", &GDBM_READER(),0640)) { - # Structure of %data: - # $data{$symb}->{$parameter}=$value; - # $data{$symb}->{'v.'.$parameter}=$version; - # since $parameter will be unescaped, we do not - # have to worry about silly parameter names... - my %data = (); # A hash of anonymous hashes.. - while (my ($key,$value) = each(%hash)) { - my ($v,$symb,$param) = split(/:/,$key); - next if ($v eq 'version' || $symb eq 'keys'); - next if (exists($data{$symb}) && - exists($data{$symb}->{$param}) && - $data{$symb}->{'v.'.$param} > $v); - $data{$symb}->{$param}=$value; - $data{$symb}->{'v.'.$param}=$v; - } - if (untie(%hash)) { - while (my ($symb,$param_hash) = each(%data)) { - while(my ($param,$value) = each (%$param_hash)){ - next if ($param =~ /^v\./); # Ignore versions... - # - # Just dump the symb=value pairs separated by & - # - $qresult.=$symb.':'.$param.'='.$value.'&'; - } - } - chop($qresult); - Reply($client , "$qresult\n", $userinput); - } else { - Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting currentdump\n", $userinput); - } - } else { - Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting currentdump\n", $userinput); - } +sub SSLConnection { + my $Socket = shift; - return 1; -} -RegisterHandler("currentdump", \&DumpProfileDatabase, 0, 1, 0); -# -# Dump a profile database with an optional regular expression -# to match against the keys. In this dump, no effort is made -# to separate symb from version information. Presumably the -# databases that are dumped by this command are of a different -# structure. Need to look at this and improve the documentation of -# both this and the currentdump handler. -# Parameters: -# $cmd - The command keyword. -# $tail - All of the characters after the $cmd: -# These are expected to be a colon -# separated list containing: -# domain/user - identifying the user. -# namespace - identifying the database. -# regexp - optional regular expression -# that is matched against -# database keywords to do -# selective dumps. -# $client - Channel open on the client. -# Returns: -# 1 - Continue processing. -# Side effects: -# response is written to $client. -# -sub DumpWithRegexp { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($udom,$uname,$namespace,$regexp)=split(/:/,$tail); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - if (defined($regexp)) { - $regexp=&unescape($regexp); - } else { - $regexp='.'; - } - my $qresult=''; - my $proname=propath($udom,$uname); - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db", - &GDBM_READER(),0640)) { - study($regexp); - while (my ($key,$value) = each(%hash)) { - if ($regexp eq '.') { - $qresult.=$key.'='.$value.'&'; - } else { - my $unescapeKey = &unescape($key); - if (eval('$unescapeKey=~/$regexp/')) { - $qresult.="$key=$value&"; - } - } - } - if (untie(%hash)) { - chop($qresult); - Reply($client, "$qresult\n", $userinput); - } else { - Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting dump\n", $userinput); + Debug("SSLConnection: "); + my $KeyFile = lonssl::KeyFile(); + if(!$KeyFile) { + my $err = lonssl::LastError(); + &logthis(" CRITICAL" + ."Can't get key file $err "); + return undef; } - } else { - Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting dump\n", $userinput); - } + my ($CACertificate, + $Certificate) = lonssl::CertificateFile(); - return 1; -} -RegisterHandler("dump", \&DumpWithRegexp, 0, 1, 0); -# Store an aitem in any database but the roles database. -# -# Parameters: -# $cmd - Request command keyword. -# $tail - Tail of the request. This is a colon -# separated list containing: -# domain/user - User and authentication domain. -# namespace - Name of the database being modified -# rid - Resource keyword to modify. -# what - new value associated with rid. -# -# $client - Socket open on the client. -# -# -# Returns: -# 1 (keep on processing). -# Side-Effects: -# Writes to the client -sub StoreHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; + # If any of the key, certificate or certificate authority + # certificate filenames are not defined, this can't work. - my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - if ($namespace ne 'roles') { - chomp($what); - my $proname=propath($udom,$uname); - my $now=time; - unless ($namespace=~/^nohist\_/) { - my $hfh; - if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { - print $hfh "P:$now:$rid:$what\n"; - } - } - my @pairs=split(/\&/,$what); - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db", - &GDBM_WRCREAT(),0640)) { - my @previouskeys=split(/&/,$hash{"keys:$rid"}); - my $key; - $hash{"version:$rid"}++; - my $version=$hash{"version:$rid"}; - my $allkeys=''; - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - $allkeys.=$key.':'; - $hash{"$version:$rid:$key"}=$value; - } - $hash{"$version:$rid:timestamp"}=$now; - $allkeys.='timestamp'; - $hash{"$version:keys:$rid"}=$allkeys; - if (untie(%hash)) { - Reply($client, "ok\n", $userinput); - } else { - Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting store\n", $userinput); - } - } else { - Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting store\n", $userinput); - } - } else { - Failure($client, "refused\n", $userinput); - } + if((!$Certificate) || (!$CACertificate)) { + my $err = lonssl::LastError(); + &logthis(" CRITICAL" + ."Can't get certificates: $err "); - return 1; -} -RegisterHandler("store", \&StoreHandler, 0, 1, 0); -# -# Restore a prior version of a resource. -# -# Parameters: -# $cmd - Command keyword. -# $tail - Remainder of the request which consists of: -# domain/user - User and auth. domain. -# namespace - name of resource database. -# rid - Resource id. -# $client - socket open on the client. -# -# Returns: -# 1 indicating the caller should not yet exit. -# Side-effects: -# Writes a reply to the client. -# -sub RestoreHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; # Only used for logging purposes. - - my ($cmd,$udom,$uname,$namespace,$rid) = split(/:/,$userinput); - $namespace=~s/\//\_/g; - $namespace=~s/\W//g; - chomp($rid); - my $proname=propath($udom,$uname); - my $qresult=''; - my %hash; - if (tie(%hash,'GDBM_File',"$proname/$namespace.db", - &GDBM_READER(),0640)) { - my $version=$hash{"version:$rid"}; - $qresult.="version=$version&"; - my $scope; - for ($scope=1;$scope<=$version;$scope++) { - my $vkeys=$hash{"$scope:keys:$rid"}; - my @keys=split(/:/,$vkeys); - my $key; - $qresult.="$scope:keys=$vkeys&"; - foreach $key (@keys) { - $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&"; - } - } - if (untie(%hash)) { - $qresult=~s/\&$//; - Reply( $client, "$qresult\n", $userinput); - } else { - Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting restore\n", $userinput); - } - } else { - Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting restore\n", $userinput); - } - - return 1; + return undef; + } + Debug("Key: $KeyFile CA: $CACertificate Cert: $Certificate"); + # Indicate to our peer that we can procede with + # a transition to ssl authentication: -} -RegisterHandler("restor", \&RestoreHandler, 0,1,0); + print $Socket "ok:ssl\n"; -# -# Add a chat message to to a discussion board. -# -# Parameters: -# $cmd - Request keyword. -# $tail - Tail of the command. A colon separated list -# containing: -# cdom - Domain on which the chat board lives -# cnum - Identifier of the discussion group. -# post - Body of the posting. -# $client - Socket open on the client. -# Returns: -# 1 - Indicating caller should keep on processing. -# -# Side-effects: -# writes a reply to the client. -# -# -sub SendChatHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; + Debug("Approving promotion -> ssl"); + # And do so: + + my $SSLSocket = lonssl::PromoteServerSocket($Socket, + $CACertificate, + $Certificate, + $KeyFile); + if(! ($SSLSocket) ) { # SSL socket promotion failed. + my $err = lonssl::LastError(); + &logthis(" CRITICAL " + ."SSL Socket promotion failed: $err "); + return undef; + } + Debug("SSL Promotion successful"); - my $userinput = "$cmd:$tail"; + # + # The only thing we'll use the socket for is to send the IDEA key + # to the peer: - my ($cdom,$cnum,$newpost)=split(/\:/,$tail); - &chatadd($cdom,$cnum,$newpost); - Reply($client, "ok\n", $userinput); + my $Key = lonlocal::CreateCipherKey(); + print $SSLSocket "$Key\n"; - return 1; -} -RegisterHandler("chatsend", \&SendChatHandler, 0, 1, 0); -# -# Retrieve the set of chat messagss from a discussion board. -# -# Parameters: -# $cmd - Command keyword that initiated the request. -# $tail - Remainder of the request after the command -# keyword. In this case a colon separated list of -# chat domain - Which discussion board. -# chat id - Discussion thread(?) -# domain/user - Authentication domain and username -# of the requesting person. -# $client - Socket open on the client program. -# Returns: -# 1 - continue processing -# Side effects: -# Response is written to the client. -# -sub RetrieveChatHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($cdom,$cnum,$udom,$uname)=split(/\:/,$tail); - my $reply=''; - foreach (&getchat($cdom,$cnum,$udom,$uname)) { - $reply.=&escape($_).':'; - } - $reply=~s/\:$//; - Reply($client, $reply."\n", $userinput); + lonssl::Close($SSLSocket); + Debug("Key exchange complete: $Key"); - return 1; + return $Key; } -RegisterHandler("chatretr", \&RetrieveChatHandler, 0, 1, 0); # -# Initiate a query of an sql database. SQL query repsonses get put in -# a file for later retrieval. This prevents sql query results from -# bottlenecking the system. Note that with loncnew, perhaps this is -# less of an issue since multiple outstanding requests can be concurrently -# serviced. +# InsecureConnection: +# If insecure connections are allowd, +# exchange a challenge with the client to 'validate' the +# client (not really, but that's the protocol): +# We produce a challenge string that's sent to the client. +# The client must then echo the challenge verbatim to us. # -# Parameters: -# $cmd - COmmand keyword that initiated the request. -# $tail - Remainder of the command after the keyword. -# For this function, this consists of a query and -# 3 arguments that are self-documentingly labelled -# in the original arg1, arg2, arg3. -# $client - Socket open on the client. -# Return: -# 1 - Indicating processing should continue. -# Side-effects: -# a reply is written to $client. -# -sub SendQueryHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($query,$arg1,$arg2,$arg3)=split(/\:/,$tail); - $query=~s/\n*$//g; - Reply($client, "". sqlreply("$clientname\&$query". - "\&$arg1"."\&$arg2"."\&$arg3")."\n", - $userinput); - - return 1; -} -RegisterHandler("querysend", \&SendQueryHandler, 0, 1, 0); - -# -# Add a reply to an sql query. SQL queries are done asyncrhonously. -# The query is submitted via a "querysend" transaction. -# There it is passed on to the lonsql daemon, queued and issued to -# mysql. -# This transaction is invoked when the sql transaction is complete -# it stores the query results in flie and indicates query completion. -# presumably local software then fetches this response... I'm guessing -# the sequence is: lonc does a querysend, we ask lonsql to do it. -# lonsql on completion of the query interacts with the lond of our -# client to do a query reply storing two files: -# - id - The results of the query. -# - id.end - Indicating the transaction completed. -# NOTE: id is a unique id assigned to the query and querysend time. -# Parameters: -# $cmd - Command keyword that initiated this request. -# $tail - Remainder of the tail. In this case that's a colon -# separated list containing the query Id and the -# results of the query. -# $client - Socket open on the client. -# Return: -# 1 - Indicating that we should continue processing. -# Side effects: -# ok written to the client. -# -sub ReplyQueryHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($cmd,$id,$reply)=split(/:/,$userinput); - my $store; - my $execdir=$perlvar{'lonDaemons'}; - if ($store=IO::File->new(">$execdir/tmp/$id")) { - $reply=~s/\&/\n/g; - print $store $reply; - close $store; - my $store2=IO::File->new(">$execdir/tmp/$id.end"); - print $store2 "done\n"; - close $store2; - Reply($client, "ok\n", $userinput); - } - else { - Failure($client, "error: ".($!+0) - ." IO::File->new Failed ". - "while attempting queryreply\n", $userinput); - } - - - return 1; -} -RegisterHandler("queryreply", \&ReplyQueryHandler, 0, 1, 0); -# -# Process the courseidput query. Not quite sure what this means -# at the system level sense. It appears a gdbm file in the -# /home/httpd/lonUsers/$domain/nohist_courseids is tied and -# a set of entries made in that database. -# -# Parameters: -# $cmd - The command keyword that initiated this request. -# $tail - Tail of the command. In this case consists of a colon -# separated list contaning the domain to apply this to and -# an ampersand separated list of keyword=value pairs. -# $client - Socket open on the client. -# Returns: -# 1 - indicating that processing should continue -# -# Side effects: -# reply is written to the client. +# Parameter: +# Socket - Socket open on the client. +# Returns: +# 1 - success. +# 0 - failure (e.g.mismatch or insecure not allowed). # -sub PutCourseIdHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($udom,$what)=split(/:/,$tail); - chomp($what); - $udom=~s/\W//g; - my $proname= - "$perlvar{'lonUsersDir'}/$udom/nohist_courseids"; - my $now=time; - my @pairs=split(/\&/,$what); - my %hash; - if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) { - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - $hash{$key}=$value.':'.$now; - } - if (untie(%hash)) { - Reply($client, "ok\n", $userinput); - } else { - Failure( $client, "error: ".($!+0) - ." untie(GDBM) Failed ". - "while attempting courseidput\n", $userinput); - } - } else { - Failure( $client, "error: ".($!+0) - ." tie(GDBM) Failed ". - "while attempting courseidput\n", $userinput); - } +sub InsecureConnection { + my $Socket = shift; - return 1; -} -RegisterHandler("courseidput", \&PutCourseIdHandler, 0, 1, 0); + # Don't even start if insecure connections are not allowed. -# Retrieves the value of a course id resource keyword pattern -# defined since a starting date. Both the starting date and the -# keyword pattern are optional. If the starting date is not supplied it -# is treated as the beginning of time. If the pattern is not found, -# it is treatred as "." matching everything. -# -# Parameters: -# $cmd - Command keyword that resulted in us being dispatched. -# $tail - The remainder of the command that, in this case, consists -# of a colon separated list of: -# domain - The domain in which the course database is -# defined. -# since - Optional parameter describing the minimum -# time of definition(?) of the resources that -# will match the dump. -# description - regular expression that is used to filter -# the dump. Only keywords matching this regexp -# will be used. -# $client - The socket open on the client. -# Returns: -# 1 - Continue processing. -# Side Effects: -# a reply is written to $client. -sub DumpCourseIdHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($udom,$since,$description) =split(/:/,$tail); - if (defined($description)) { - $description=&unescape($description); - } else { - $description='.'; - } - unless (defined($since)) { $since=0; } - my $qresult=''; - my $proname = "$perlvar{'lonUsersDir'}/$udom/nohist_courseids"; - my %hash; - if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) { - while (my ($key,$value) = each(%hash)) { - my ($descr,$lasttime)=split(/\:/,$value); - if ($lasttime<$since) { - next; - } - if ($description eq '.') { - $qresult.=$key.'='.$descr.'&'; - } else { - my $unescapeVal = &unescape($descr); - if (eval('$unescapeVal=~/$description/i')) { - $qresult.="$key=$descr&"; - } - } - } - if (untie(%hash)) { - chop($qresult); - Reply($client, "$qresult\n", $userinput); - } else { - Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting courseiddump\n", $userinput); - } - } else { - Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting courseiddump\n", $userinput); - } - - - return 1; -} -RegisterHandler("courseiddump", \&DumpCourseIdHandler, 0, 1, 0); -# -# Puts an id to a domains id database. -# -# Parameters: -# $cmd - The command that triggered us. -# $tail - Remainder of the request other than the command. This is a -# colon separated list containing: -# $domain - The domain for which we are writing the id. -# $pairs - The id info to write... this is and & separated list -# of keyword=value. -# $client - Socket open on the client. -# Returns: -# 1 - Continue processing. -# Side effects: -# reply is written to $client. -# -sub PutIdHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$cmd:$tail"; - - my ($udom,$what)=split(/:/,$tail); - chomp($what); - $udom=~s/\W//g; - my $proname="$perlvar{'lonUsersDir'}/$udom/ids"; - my $now=time; - { - my $hfh; - if ($hfh=IO::File->new(">>$proname.hist")) { - print $hfh "P:$now:$what\n"; - } - } - my @pairs=split(/\&/,$what); - my %hash; - if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) { - foreach my $pair (@pairs) { - my ($key,$value)=split(/=/,$pair); - $hash{$key}=$value; - } - if (untie(%hash)) { - Reply($client, "ok\n", $userinput); - } else { - Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting idput\n", $userinput); + if(! $perlvar{londAllowInsecure}) { # Insecure connections not allowed. + return 0; } - } else { - Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting idput\n", $userinput); - } - return 1; -} + # Fabricate a challenge string and send it.. -RegisterHandler("idput", \&PutIdHandler, 0, 1, 0); -# -# Retrieves a set of id values from the id database. -# Returns an & separated list of results, one for each requested id to the -# client. -# -# Parameters: -# $cmd - Command keyword that caused us to be dispatched. -# $tail - Tail of the command. Consists of a colon separated: -# domain - the domain whose id table we dump -# ids Consists of an & separated list of -# id keywords whose values will be fetched. -# nonexisting keywords will have an empty value. -# $client - Socket open on the client. -# -# Returns: -# 1 - indicating processing should continue. -# Side effects: -# An & separated list of results is written to $client. -# -sub GetIdHandler { - my $cmd = shift; - my $tail = shift; - my $client = shift; - - my $userinput = "$client:$tail"; - - my ($udom,$what)=split(/:/,$tail); - chomp($what); - $udom=~s/\W//g; - my $proname="$perlvar{'lonUsersDir'}/$udom/ids"; - my @queries=split(/\&/,$what); - my $qresult=''; - my %hash; - if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) { - for (my $i=0;$i<=$#queries;$i++) { - $qresult.="$hash{$queries[$i]}&"; - } - if (untie(%hash)) { - $qresult=~s/\&$//; - Reply($client, "$qresult\n", $userinput); + my $challenge = "$$".time; # pid + time. + print $Socket "$challenge\n"; + &status("Waiting for challenge reply"); + + my $answer = <$Socket>; + $answer =~s/\W//g; + if($challenge eq $answer) { + return 1; } else { - Failure( $client, "error: ".($!+0)." untie(GDBM) Failed ". - "while attempting idget\n",$userinput); + logthis("WARNING client did not respond to challenge"); + &status("No challenge reqply"); + return 0; } - } else { - Failure($client, "error: ".($!+0)." tie(GDBM) Failed ". - "while attempting idget\n",$userinput); - } - - return 1; -} -RegisterHandler("idget", \&GetIdHandler, 0, 1, 0); -#------------------------------------------------------------------------------------ -# -# Process a Request. Takes a request from the client validates -# it and performs the operation requested by it. Returns -# a response to the client. -# -# Parameters: -# request - A string containing the user's request. -# Returns: -# 0 - Requested to exit, caller should shut down. -# 1 - Accept additional requests from the client. -# -sub ProcessRequest { - my $Request = shift; - my $KeepGoing = 1; # Assume we're not asked to stop. - my $wasenc=0; - my $userinput = $Request; # for compatibility with oldcode - - -# ------------------------------------------------------------ See if encrypted - - if($userinput =~ /^enc/) { - $wasenc = 1; - $userinput = Decipher($userinput); - if(! $userinput) { - Failure($client,"error:Encrypted data without negotiating key"); - return 0; # Break off with this imposter. - } - } - # Split off the request keyword from the rest of the stuff. - - my ($command, $tail) = split(/:/, $userinput, 2); - - Debug("Command received: $command, encoded = $wasenc"); - - -# ------------------------------------------------------------- Normal commands - - # - # If the command is in the hash, then execute it via the hash dispatch: - # - if(defined $Dispatcher{$command}) { - - my $DispatchInfo = $Dispatcher{$command}; - my $Handler = $$DispatchInfo[0]; - my $NeedEncode = $$DispatchInfo[1]; - my $ClientTypes = $$DispatchInfo[2]; - Debug("Matched dispatch hash: mustencode: $NeedEncode ClientType $ClientTypes"); - - # Validate the request: - - my $ok = 1; - my $requesterprivs = 0; - if(isClient()) { - $requesterprivs |= $CLIENT_OK; - } - if(isManager()) { - $requesterprivs |= $MANAGER_OK; - } - if($NeedEncode && (!$wasenc)) { - Debug("Must encode but wasn't: $NeedEncode $wasenc"); - $ok = 0; - } - if(($ClientTypes & $requesterprivs) == 0) { - Debug("Client not privileged to do this operation"); - $ok = 0; - } - - if($ok) { - Debug("Dispatching to handler $command $tail"); - $KeepGoing = &$Handler($command, $tail, $client); - } else { - Debug("Refusing to dispatch because ok is false"); - Failure($client, "refused", $userinput); - } - - - - - -# ---------------------------------------------------------------------- tmpput - } elsif ($userinput =~ /^tmpput/) { - if(isClient) { - my ($cmd,$what)=split(/:/,$userinput); - my $store; - $tmpsnum++; - my $id=$$.'_'.$clientip.'_'.$tmpsnum; - $id=~s/\W/\_/g; - $what=~s/\n//g; - my $execdir=$perlvar{'lonDaemons'}; - if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) { - print $store $what; - close $store; - Reply($client, "$id\n", $userinput); - } - else { - Failure( $client, "error: ".($!+0)."IO::File->new Failed ". - "while attempting tmpput\n", $userinput); - } - } else { - Failure($client, "refused\n", $userinput); - - } - -# ---------------------------------------------------------------------- tmpget - } elsif ($userinput =~ /^tmpget/) { - if(isClient) { - my ($cmd,$id)=split(/:/,$userinput); - chomp($id); - $id=~s/\W/\_/g; - my $store; - my $execdir=$perlvar{'lonDaemons'}; - if ($store=IO::File->new("$execdir/tmp/$id.tmp")) { - my $reply=<$store>; - Reply( $client, "$reply\n", $userinput); - close $store; - } - else { - Failure( $client, "error: ".($!+0)."IO::File->new Failed ". - "while attempting tmpget\n", $userinput); - } - } else { - Failure($client, "refused\n", $userinput); - - } -# ---------------------------------------------------------------------- tmpdel - } elsif ($userinput =~ /^tmpdel/) { - if(isClient) { - my ($cmd,$id)=split(/:/,$userinput); - chomp($id); - $id=~s/\W/\_/g; - my $execdir=$perlvar{'lonDaemons'}; - if (unlink("$execdir/tmp/$id.tmp")) { - Reply($client, "ok\n", $userinput); - } else { - Failure( $client, "error: ".($!+0)."Unlink tmp Failed ". - "while attempting tmpdel\n", $userinput); - } - } else { - Failure($client, "refused\n", $userinput); - } -# -------------------------------------------------------------------------- ls - } elsif ($userinput =~ /^ls/) { - if(isClient) { - my ($cmd,$ulsdir)=split(/:/,$userinput); - my $ulsout=''; - my $ulsfn; - if (-e $ulsdir) { - if(-d $ulsdir) { - if (opendir(LSDIR,$ulsdir)) { - while ($ulsfn=readdir(LSDIR)) { - my @ulsstats=stat($ulsdir.'/'.$ulsfn); - $ulsout.=$ulsfn.'&'. - join('&',@ulsstats).':'; - } - closedir(LSDIR); - } - } else { - my @ulsstats=stat($ulsdir); - $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; - } - } else { - $ulsout='no_such_dir'; - } - if ($ulsout eq '') { $ulsout='empty'; } - Reply($client, "$ulsout\n", $userinput); - } else { - Failure($client, "refused\n", $userinput); - - } -# ----------------------------------------------------------------- setannounce - } elsif ($userinput =~ /^setannounce/) { - if (isClient) { - my ($cmd,$announcement)=split(/:/,$userinput); - chomp($announcement); - $announcement=&unescape($announcement); - if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}. - '/announcement.txt')) { - print $store $announcement; - close $store; - Reply($client, "ok\n", $userinput); - } else { - Failure($client, "error: ".($!+0)."\n", $userinput); - } - } else { - Failure($client, "refused\n", $userinput); - - } -# ------------------------------------------------------------------ Hanging up - } elsif (($userinput =~ /^exit/) || - ($userinput =~ /^init/)) { # no restrictions. - &logthis("Client $clientip ($clientname) hanging up: $userinput"); - Reply($client, "bye\n", $userinput); - $client->shutdown(2); # shutdown the socket forcibly. - $client->close(); - $KeepGoing = 0; # Flag to exit the program. - -# ---------------------------------- set current host/domain - } elsif ($userinput =~ /^sethost:/) { - if (isClient) { - Reply($client, &sethost($userinput)."\n", $userinput); - } else { - Failure($client, "refused\n", $userinput); - } -#---------------------------------- request file (?) version. - } elsif ($userinput =~/^version:/) { - if (isClient) { - Reply($client, &version($userinput)."\n", $userinput); - } else { - Reply( $client, "refused\n", $userinput); - } -# ------------------------------------------------------------- unknown command - } else { - # unknown command - Failure($client, "unknown_cmd\n", $userinput); - } - - return $KeepGoing; } - # # GetCertificate: Given a transaction that requires a certificate, # this function will extract the certificate from the transaction @@ -2664,6 +349,18 @@ sub GetCertificate { return $clientip; } +# +# Return true if client is a manager. +# +sub isManager { + return (($ConnectionType eq "manager") || ($ConnectionType eq "both")); +} +# +# Return tru if client can do client functions +# +sub isClient { + return (($ConnectionType eq "client") || ($ConnectionType eq "both")); +} # @@ -2673,7 +370,6 @@ sub GetCertificate { # - This allows dynamic changes to the manager table # without the need to signal to the lond. # - sub ReadManagerTable { # Clean out the old table first.. @@ -2690,7 +386,6 @@ sub ReadManagerTable { while(my $host = ) { chomp($host); if ($host =~ "^#") { # Comment line. - logthis(' Skipping line: '. "$host\n"); next; } if (!defined $hostip{$host}) { # This is a non cluster member @@ -2740,8 +435,8 @@ sub ValidManager { # 1 - Success. # sub CopyFile { - my $oldfile = shift; - my $newfile = shift; + + my ($oldfile, $newfile) = @_; # The file must exist: @@ -2841,8 +536,8 @@ sub AdjustHostContents { # 0 - failure and $! has an errno. # sub InstallFile { - my $Filename = shift; - my $Contents = shift; + + my ($Filename, $Contents) = @_; my $TempFile = $Filename.".tmp"; # Open the file for write: @@ -2865,6 +560,8 @@ sub InstallFile { return 1; } + + # # ConfigFileFromSelector: converts a configuration file selector # (one of host or domain at this point) into a @@ -2954,8 +651,7 @@ sub PushFile { &logthis(' Pushfile: unable to install ' .$tablefile." $! "); return "error:$!"; - } - else { + } else { &logthis(' Installed new '.$tablefile .""); @@ -3079,8 +775,8 @@ sub isValidEditCommand { # file being edited. # sub ApplyEdit { - my $directive = shift; - my $editor = shift; + + my ($directive, $editor) = @_; # Break the directive down into its command and its parameters # (at most two at this point. The meaning of the parameters, if in fact @@ -3164,8 +860,8 @@ sub AdjustOurHost { # editor - Editor containing the file. # sub ReplaceConfigFile { - my $filename = shift; - my $editor = shift; + + my ($filename, $editor) = @_; CopyFile ($filename, $filename.".old"); @@ -3234,6 +930,2212 @@ sub EditFile { return "ok\n"; } + +#--------------------------------------------------------------- +# +# Manipulation of hash based databases (factoring out common code +# for later use as we refactor. +# +# Ties a domain level resource file to a hash. +# If requested a history entry is created in the associated hist file. +# +# Parameters: +# domain - Name of the domain in which the resource file lives. +# namespace - Name of the hash within that domain. +# how - How to tie the hash (e.g. GDBM_WRCREAT()). +# loghead - Optional parameter, if present a log entry is created +# in the associated history file and this is the first part +# of that entry. +# logtail - Goes along with loghead, The actual logentry is of the +# form $loghead::logtail. +# Returns: +# Reference to a hash bound to the db file or alternatively undef +# if the tie failed. +# +sub tie_domain_hash { + my ($domain,$namespace,$how,$loghead,$logtail) = @_; + + # Filter out any whitespace in the domain name: + + $domain =~ s/\W//g; + + # We have enough to go on to tie the hash: + + my $user_top_dir = $perlvar{'lonUsersDir'}; + my $domain_dir = $user_top_dir."/$domain"; + my $resource_file = $domain_dir."/$namespace.db"; + my %hash; + if(tie(%hash, 'GDBM_File', $resource_file, $how, 0640)) { + if (defined($loghead)) { # Need to log the operation. + my $logFh = IO::File->new(">>$domain_dir/$namespace.hist"); + if($logFh) { + my $timestamp = time; + print $logFh "$loghead:$timestamp:$logtail\n"; + } + $logFh->close; + } + return \%hash; # Return the tied hash. + } else { + return undef; # Tie failed. + } +} + +# +# Ties a user's resource file to a hash. +# If necessary, an appropriate history +# log file entry is made as well. +# This sub factors out common code from the subs that manipulate +# the various gdbm files that keep keyword value pairs. +# Parameters: +# domain - Name of the domain the user is in. +# user - Name of the 'current user'. +# namespace - Namespace representing the file to tie. +# how - What the tie is done to (e.g. GDBM_WRCREAT(). +# loghead - Optional first part of log entry if there may be a +# history file. +# what - Optional tail of log entry if there may be a history +# file. +# Returns: +# hash to which the database is tied. It's up to the caller to untie. +# undef if the has could not be tied. +# +sub tie_user_hash { + my ($domain,$user,$namespace,$how,$loghead,$what) = @_; + + $namespace=~s/\//\_/g; # / -> _ + $namespace=~s/\W//g; # whitespace eliminated. + my $proname = propath($domain, $user); + + # Tie the database. + + my %hash; + if(tie(%hash, 'GDBM_File', "$proname/$namespace.db", + $how, 0640)) { + # If this is a namespace for which a history is kept, + # make the history log entry: + if (($namespace =~/^nohist\_/) && (defined($loghead))) { + my $args = scalar @_; + Debug(" Opening history: $namespace $args"); + my $hfh = IO::File->new(">>$proname/$namespace.hist"); + if($hfh) { + my $now = time; + print $hfh "$loghead:$now:$what\n"; + } + $hfh->close; + } + return \%hash; + } else { + return undef; + } + +} + +#--------------------- Request Handlers -------------------------------------------- +# +# By convention each request handler registers itself prior to the sub +# declaration: +# + +#++ +# +# Handles ping requests. +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $replyfd- File descriptor connected to the client +# Implicit Inputs: +# $currenthostid - Global variable that carries the name of the host we are +# known as. +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit. +# Side effects: +# Reply information is sent to the client. + +sub ping_handler { + my ($cmd, $tail, $client) = @_; + Debug("$cmd $tail $client .. $currenthostid:"); + + Reply( $client,"$currenthostid\n","$cmd:$tail"); + + return 1; +} +®ister_handler("ping", \&ping_handler, 0, 1, 1); # Ping unencoded, client or manager. + +#++ +# +# Handles pong requests. Pong replies with our current host id, and +# the results of a ping sent to us via our lonc. +# +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $replyfd- File descriptor connected to the client +# Implicit Inputs: +# $currenthostid - Global variable that carries the name of the host we are +# connected to. +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit. +# Side effects: +# Reply information is sent to the client. + +sub pong_handler { + my ($cmd, $tail, $replyfd) = @_; + + my $reply=&reply("ping",$clientname); + &Reply( $replyfd, "$currenthostid:$reply\n", "$cmd:$tail"); + return 1; +} +®ister_handler("pong", \&pong_handler, 0, 1, 1); # Pong unencoded, client or manager + +#++ +# Called to establish an encrypted session key with the remote client. +# Note that with secure lond, in most cases this function is never +# invoked. Instead, the secure session key is established either +# via a local file that's locked down tight and only lives for a short +# time, or via an ssl tunnel...and is generated from a bunch-o-random +# bits from /dev/urandom, rather than the predictable pattern used by +# by this sub. This sub is only used in the old-style insecure +# key negotiation. +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $replyfd- File descriptor connected to the client +# Implicit Inputs: +# $currenthostid - Global variable that carries the name of the host +# known as. +# $clientname - Global variable that carries the name of the hsot we're connected to. +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit. +# Implicit Outputs: +# Reply information is sent to the client. +# $cipher is set with a reference to a new IDEA encryption object. +# +sub establish_key_handler { + my ($cmd, $tail, $replyfd) = @_; + + my $buildkey=time.$$.int(rand 100000); + $buildkey=~tr/1-6/A-F/; + $buildkey=int(rand 100000).$buildkey.int(rand 100000); + my $key=$currenthostid.$clientname; + $key=~tr/a-z/A-Z/; + $key=~tr/G-P/0-9/; + $key=~tr/Q-Z/0-9/; + $key=$key.$buildkey.$key.$buildkey.$key.$buildkey; + $key=substr($key,0,32); + my $cipherkey=pack("H32",$key); + $cipher=new IDEA $cipherkey; + &Reply($replyfd, "$buildkey\n", "$cmd:$tail"); + + return 1; + +} +®ister_handler("ekey", \&establish_key_handler, 0, 1,1); + + +# Handler for the load command. Returns the current system load average +# to the requestor. +# +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $replyfd- File descriptor connected to the client +# Implicit Inputs: +# $currenthostid - Global variable that carries the name of the host +# known as. +# $clientname - Global variable that carries the name of the hsot we're connected to. +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit. +# Side effects: +# Reply information is sent to the client. +sub load_handler { + my ($cmd, $tail, $replyfd) = @_; + + # Get the load average from /proc/loadavg and calculate it as a percentage of + # the allowed load limit as set by the perl global variable lonLoadLim + + my $loadavg; + my $loadfile=IO::File->new('/proc/loadavg'); + + $loadavg=<$loadfile>; + $loadavg =~ s/\s.*//g; # Extract the first field only. + + my $loadpercent=100*$loadavg/$perlvar{'lonLoadLim'}; + + &Reply( $replyfd, "$loadpercent\n", "$cmd:$tail"); + + return 1; +} +register_handler("load", \&load_handler, 0, 1, 0); + +# +# Process the userload request. This sub returns to the client the current +# user load average. It can be invoked either by clients or managers. +# +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $replyfd- File descriptor connected to the client +# Implicit Inputs: +# $currenthostid - Global variable that carries the name of the host +# known as. +# $clientname - Global variable that carries the name of the hsot we're connected to. +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit +# Implicit inputs: +# whatever the userload() function requires. +# Implicit outputs: +# the reply is written to the client. +# +sub user_load_handler { + my ($cmd, $tail, $replyfd) = @_; + + my $userloadpercent=&userload(); + &Reply($replyfd, "$userloadpercent\n", "$cmd:$tail"); + + return 1; +} +register_handler("userload", \&user_load_handler, 0, 1, 0); + +# Process a request for the authorization type of a user: +# (userauth). +# +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $replyfd- File descriptor connected to the client +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit +# Implicit outputs: +# The user authorization type is written to the client. +# +sub user_authorization_type { + my ($cmd, $tail, $replyfd) = @_; + + my $userinput = "$cmd:$tail"; + + # Pull the domain and username out of the command tail. + # and call get_auth_type to determine the authentication type. + + my ($udom,$uname)=split(/:/,$tail); + my $result = &get_auth_type($udom, $uname); + if($result eq "nouser") { + &Failure( $replyfd, "unknown_user\n", $userinput); + } else { + # + # We only want to pass the second field from get_auth_type + # for ^krb.. otherwise we'll be handing out the encrypted + # password for internals e.g. + # + my ($type,$otherinfo) = split(/:/,$result); + if($type =~ /^krb/) { + $type = $result; + } + &Reply( $replyfd, "$type:\n", $userinput); + } + + return 1; +} +®ister_handler("currentauth", \&user_authorization_type, 1, 1, 0); + +# Process a request by a manager to push a hosts or domain table +# to us. We pick apart the command and pass it on to the subs +# that already exist to do this. +# +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $client - File descriptor connected to the client +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit +# Implicit Output: +# a reply is written to the client. + +sub push_file_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + # At this time we only know that the IP of our partner is a valid manager + # the code below is a hook to do further authentication (e.g. to resolve + # spoofing). + + my $cert = &GetCertificate($userinput); + if(&ValidManager($cert)) { + + # Now presumably we have the bona fides of both the peer host and the + # process making the request. + + my $reply = &PushFile($userinput); + &Reply($client, "$reply\n", $userinput); + + } else { + &Failure( $client, "refused\n", $userinput); + } + return 1; +} +®ister_handler("pushfile", \&push_file_handler, 1, 0, 1); + + + +# Process a reinit request. Reinit requests that either +# lonc or lond be reinitialized so that an updated +# host.tab or domain.tab can be processed. +# +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $client - File descriptor connected to the client +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit +# Implicit output: +# a reply is sent to the client. +# +sub reinit_process_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my $cert = &GetCertificate($userinput); + if(&ValidManager($cert)) { + chomp($userinput); + my $reply = &ReinitProcess($userinput); + &Reply( $client, "$reply\n", $userinput); + } else { + &Failure( $client, "refused\n", $userinput); + } + return 1; +} + +®ister_handler("reinit", \&reinit_process_handler, 1, 0, 1); + +# Process the editing script for a table edit operation. +# the editing operation must be encrypted and requested by +# a manager host. +# +# Parameters: +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $client - File descriptor connected to the client +# Returns: +# 1 - Ok to continue processing. +# 0 - Program should exit +# Implicit output: +# a reply is sent to the client. +# +sub edit_table_handler { + my ($command, $tail, $client) = @_; + + my $userinput = "$command:$tail"; + + my $cert = &GetCertificate($userinput); + if(&ValidManager($cert)) { + my($filetype, $script) = split(/:/, $tail); + if (($filetype eq "hosts") || + ($filetype eq "domain")) { + if($script ne "") { + &Reply($client, # BUGBUG - EditFile + &EditFile($userinput), # could fail. + $userinput); + } else { + &Failure($client,"refused\n",$userinput); + } + } else { + &Failure($client,"refused\n",$userinput); + } + } else { + &Failure($client,"refused\n",$userinput); + } + return 1; +} +register_handler("edit", \&edit_table_handler, 1, 0, 1); + + +# +# Authenticate a user against the LonCAPA authentication +# database. Note that there are several authentication +# possibilities: +# - unix - The user can be authenticated against the unix +# password file. +# - internal - The user can be authenticated against a purely +# internal per user password file. +# - kerberos - The user can be authenticated against either a kerb4 or kerb5 +# ticket granting authority. +# - user - The person tailoring LonCAPA can supply a user authentication +# mechanism that is per system. +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# Implicit inputs: +# The authentication systems describe above have their own forms of implicit +# input into the authentication process that are described above. +# +sub authenticate_handler { + my ($cmd, $tail, $client) = @_; + + + # Regenerate the full input line + + my $userinput = $cmd.":".$tail; + + # udom - User's domain. + # uname - Username. + # upass - User's password. + + my ($udom,$uname,$upass)=split(/:/,$tail); + &Debug(" Authenticate domain = $udom, user = $uname, password = $upass"); + chomp($upass); + $upass=&unescape($upass); + + my $pwdcorrect = &validate_user($udom, $uname, $upass); + if($pwdcorrect) { + &Reply( $client, "authorized\n", $userinput); + # + # Bad credentials: Failed to authorize + # + } else { + &Failure( $client, "non_authorized\n", $userinput); + } + + return 1; +} + +register_handler("auth", \&authenticate_handler, 1, 1, 0); + +# +# Change a user's password. Note that this function is complicated by +# the fact that a user may be authenticated in more than one way: +# At present, we are not able to change the password for all types of +# authentication methods. Only for: +# unix - unix password or shadow passoword style authentication. +# local - Locally written authentication mechanism. +# For now, kerb4 and kerb5 password changes are not supported and result +# in an error. +# FUTURE WORK: +# Support kerberos passwd changes? +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# Implicit inputs: +# The authentication systems describe above have their own forms of implicit +# input into the authentication process that are described above. +sub change_password_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = $cmd.":".$tail; # Reconstruct client's string. + + # + # udom - user's domain. + # uname - Username. + # upass - Current password. + # npass - New password. + + my ($udom,$uname,$upass,$npass)=split(/:/,$tail); + + $upass=&unescape($upass); + $npass=&unescape($npass); + &Debug("Trying to change password for $uname"); + + # First require that the user can be authenticated with their + # old password: + + my $validated = &validate_user($udom, $uname, $upass); + if($validated) { + my $realpasswd = &get_auth_type($udom, $uname); # Defined since authd. + + my ($howpwd,$contentpwd)=split(/:/,$realpasswd); + if ($howpwd eq 'internal') { + &Debug("internal auth"); + my $salt=time; + $salt=substr($salt,6,2); + my $ncpass=crypt($npass,$salt); + if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) { + &logthis("Result of password change for " + ."$uname: pwchange_success"); + &Reply($client, "ok\n", $userinput); + } else { + &logthis("Unable to open $uname passwd " + ."to change password"); + &Failure( $client, "non_authorized\n",$userinput); + } + } elsif ($howpwd eq 'unix') { + # Unix means we have to access /etc/password + &Debug("auth is unix"); + my $execdir=$perlvar{'lonDaemons'}; + &Debug("Opening lcpasswd pipeline"); + my $pf = IO::File->new("|$execdir/lcpasswd > " + ."$perlvar{'lonDaemons'}" + ."/logs/lcpasswd.log"); + print $pf "$uname\n$npass\n$npass\n"; + close $pf; + my $err = $?; + my $result = ($err>0 ? 'pwchange_failure' : 'ok'); + &logthis("Result of password change for $uname: ". + &lcpasswdstrerror($?)); + &Reply($client, "$result\n", $userinput); + } else { + # this just means that the current password mode is not + # one we know how to change (e.g the kerberos auth modes or + # locally written auth handler). + # + &Failure( $client, "auth_mode_error\n", $userinput); + } + + } else { + &Failure( $client, "non_authorized\n", $userinput); + } + + return 1; +} +register_handler("passwd", \&change_password_handler, 1, 1, 0); + + +# +# Create a new user. User in this case means a lon-capa user. +# The user must either already exist in some authentication realm +# like kerberos or the /etc/passwd. If not, a user completely local to +# this loncapa system is created. +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# Implicit inputs: +# The authentication systems describe above have their own forms of implicit +# input into the authentication process that are described above. +sub add_user_handler { + + my ($cmd, $tail, $client) = @_; + + + my ($udom,$uname,$umode,$npass)=split(/:/,$tail); + my $userinput = $cmd.":".$tail; # Reconstruct the full request line. + + &Debug("cmd =".$cmd." $udom =".$udom." uname=".$uname); + + + if($udom eq $currentdomainid) { # Reject new users for other domains... + + my $oldumask=umask(0077); + chomp($npass); + $npass=&unescape($npass); + my $passfilename = &password_path($udom, $uname); + &Debug("Password file created will be:".$passfilename); + if (-e $passfilename) { + &Failure( $client, "already_exists\n", $userinput); + } else { + my @fpparts=split(/\//,$passfilename); + my $fpnow=$fpparts[0].'/'.$fpparts[1].'/'.$fpparts[2]; + my $fperror=''; + for (my $i=3;$i<= ($#fpparts-1);$i++) { + $fpnow.='/'.$fpparts[$i]; + unless (-e $fpnow) { + &logthis("mkdir $fpnow"); + unless (mkdir($fpnow,0777)) { + $fperror="error: ".($!+0)." mkdir failed while attempting " + ."makeuser"; + } + } + } + unless ($fperror) { + my $result=&make_passwd_file($uname, $umode,$npass, $passfilename); + &Reply($client, $result, $userinput); #BUGBUG - could be fail + } else { + &Failure($client, "$fperror\n", $userinput); + } + } + umask($oldumask); + } else { + &Failure($client, "not_right_domain\n", + $userinput); # Even if we are multihomed. + + } + return 1; + +} +®ister_handler("makeuser", \&add_user_handler, 1, 1, 0); + +# +# Change the authentication method of a user. Note that this may +# also implicitly change the user's password if, for example, the user is +# joining an existing authentication realm. Known authentication realms at +# this time are: +# internal - Purely internal password file (only loncapa knows this user) +# local - Institutionally written authentication module. +# unix - Unix user (/etc/passwd with or without /etc/shadow). +# kerb4 - kerberos version 4 +# kerb5 - kerberos version 5 +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# Implicit inputs: +# The authentication systems describe above have their own forms of implicit +# input into the authentication process that are described above. +# +sub change_authentication_handler { + + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; # Reconstruct user input. + + my ($udom,$uname,$umode,$npass)=split(/:/,$tail); + &Debug("cmd = ".$cmd." domain= ".$udom."uname =".$uname." umode= ".$umode); + if ($udom ne $currentdomainid) { + &Failure( $client, "not_right_domain\n", $client); + } else { + + chomp($npass); + + $npass=&unescape($npass); + my $passfilename = &password_path($udom, $uname); + if ($passfilename) { # Not allowed to create a new user!! + my $result=&make_passwd_file($uname, $umode,$npass,$passfilename); + &Reply($client, $result, $userinput); + } else { + &Failure($client, "non_authorized", $userinput); # Fail the user now. + } + } + return 1; +} +®ister_handler("changeuserauth", \&change_authentication_handler, 1,1, 0); + +# +# Determines if this is the home server for a user. The home server +# for a user will have his/her lon-capa passwd file. Therefore all we need +# to do is determine if this file exists. +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# Implicit inputs: +# The authentication systems describe above have their own forms of implicit +# input into the authentication process that are described above. +# +sub is_home_handler { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($udom,$uname)=split(/:/,$tail); + chomp($uname); + my $passfile = &password_filename($udom, $uname); + if($passfile) { + &Reply( $client, "found\n", $userinput); + } else { + &Failure($client, "not_found\n", $userinput); + } + return 1; +} +®ister_handler("home", \&is_home_handler, 0,1,0); + +# +# Process an update request for a resource?? I think what's going on here is +# that a resource has been modified that we hold a subscription to. +# If the resource is not local, then we must update, or at least invalidate our +# cached copy of the resource. +# FUTURE WORK: +# I need to look at this logic carefully. My druthers would be to follow +# typical caching logic, and simple invalidate the cache, drop any subscription +# an let the next fetch start the ball rolling again... however that may +# actually be more difficult than it looks given the complex web of +# proxy servers. +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# Implicit inputs: +# The authentication systems describe above have their own forms of implicit +# input into the authentication process that are described above. +# +sub update_resource_handler { + + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + + my $fname= $tail; # This allows interactive testing + + + my $ownership=ishome($fname); + if ($ownership eq 'not_owner') { + if (-e $fname) { + my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size, + $atime,$mtime,$ctime,$blksize,$blocks)=stat($fname); + my $now=time; + my $since=$now-$atime; + if ($since>$perlvar{'lonExpire'}) { + my $reply=&reply("unsub:$fname","$clientname"); + unlink("$fname"); + } else { + my $transname="$fname.in.transfer"; + my $remoteurl=&reply("sub:$fname","$clientname"); + my $response; + alarm(120); + { + my $ua=new LWP::UserAgent; + my $request=new HTTP::Request('GET',"$remoteurl"); + $response=$ua->request($request,$transname); + } + alarm(0); + if ($response->is_error()) { + unlink($transname); + my $message=$response->status_line; + &logthis("LWP GET: $message for $fname ($remoteurl)"); + } else { + if ($remoteurl!~/\.meta$/) { + alarm(120); + { + my $ua=new LWP::UserAgent; + my $mrequest=new HTTP::Request('GET',$remoteurl.'.meta'); + my $mresponse=$ua->request($mrequest,$fname.'.meta'); + if ($mresponse->is_error()) { + unlink($fname.'.meta'); + } + } + alarm(0); + } + rename($transname,$fname); + } + } + &Reply( $client, "ok\n", $userinput); + } else { + &Failure($client, "not_found\n", $userinput); + } + } else { + &Failure($client, "rejected\n", $userinput); + } + return 1; +} +®ister_handler("update", \&update_resource_handler, 0 ,1, 0); + +# +# Fetch a user file from a remote server to the user's home directory +# userfiles subdir. +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# $client - File descriptor connected to client. +# Returns +# 0 - Requested to exit, caller should shut down. +# 1 - Continue processing. +# +sub fetch_user_file_handler { + + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + my $fname = $tail; + my ($udom,$uname,$ufile)=split(/\//,$fname); + my $udir=&propath($udom,$uname).'/userfiles'; + unless (-e $udir) { + mkdir($udir,0770); + } + if (-e $udir) { + $ufile=~s/^[\.\~]+//; + $ufile=~s/\///g; + my $destname=$udir.'/'.$ufile; + my $transname=$udir.'/'.$ufile.'.in.transit'; + my $remoteurl='http://'.$clientip.'/userfiles/'.$fname; + my $response; + alarm(120); + { + my $ua=new LWP::UserAgent; + my $request=new HTTP::Request('GET',"$remoteurl"); + $response=$ua->request($request,$transname); + } + alarm(0); + if ($response->is_error()) { + unlink($transname); + my $message=$response->status_line; + &logthis("LWP GET: $message for $fname ($remoteurl)"); + &Failure($client, "failed\n", $userinput); + } else { + if (!rename($transname,$destname)) { + &logthis("Unable to move $transname to $destname"); + unlink($transname); + &Failure($client, "failed\n", $userinput); + } else { + &Reply($client, "ok\n", $userinput); + } + } + } else { + &Failure($client, "not_home\n", $userinput); + } + return 1; +} +®ister_handler("fetchuserfile", \&fetch_user_file_handler, 0, 1, 0); + +# +# Remove a file from a user's home directory userfiles subdirectory. +# Parameters: +# cmd - the Lond request keyword that got us here. +# tail - the part of the command past the keyword. +# client- File descriptor connected with the client. +# +# Returns: +# 1 - Continue processing. + +sub remove_user_file_handler { + my ($cmd, $tail, $client) = @_; + + my ($fname) = split(/:/, $tail); # Get rid of any tailing :'s lonc may have sent. + + my ($udom,$uname,$ufile) = ($fname =~ m|^([^/]+)/([^/]+)/(.+)$|); + if ($ufile =~m|/\.\./|) { + # any files paths with /../ in them refuse + # to deal with + &Failure($client, "refused\n", "$cmd:$tail"); + } else { + my $udir = &propath($udom,$uname); + if (-e $udir) { + my $file=$udir.'/userfiles/'.$ufile; + if (-e $file) { + unlink($file); + if (-e $file) { + &Failure($client, "failed\n", "$cmd:$tail"); + } else { + &Reply($client, "ok\n", "$cmd:$tail"); + } + } else { + &Failure($client, "not_found\n", "$cmd:$tail"); + } + } else { + &Failure($client, "not_home\n", "$cmd:$tail"); + } + } + return 1; +} +®ister_handler("removeuserfile", \&remove_user_file_handler, 0,1,0); + + +# +# Authenticate access to a user file by checking the user's +# session token(?) +# +# Parameters: +# cmd - The request keyword that dispatched to tus. +# tail - The tail of the request (colon separated parameters). +# client - Filehandle open on the client. +# Return: +# 1. + +sub token_auth_user_file_handler { + my ($cmd, $tail, $client) = @_; + + my ($fname, $session) = split(/:/, $tail); + + chomp($session); + my $reply='non_auth'; + if (open(ENVIN,$perlvar{'lonIDsDir'}.'/'. + $session.'.id')) { + while (my $line=) { + if ($line=~ m|userfile\.\Q$fname\E\=|) { $reply='ok'; } + } + close(ENVIN); + &Reply($client, $reply); + } else { + &Failure($client, "invalid_token\n", "$cmd:$tail"); + } + return 1; + +} + +®ister_handler("tokenauthuserfile", \&token_auth_user_file_handler, 0,1,0); +#--------------------------------------------------------------- +# +# Getting, decoding and dispatching requests: +# + +# +# Get a Request: +# Gets a Request message from the client. The transaction +# is defined as a 'line' of text. We remove the new line +# from the text line. +# +sub get_request { + my $input = <$client>; + chomp($input); + + Debug("get_request: Request = $input\n"); + + &status('Processing '.$clientname.':'.$input); + + return $input; +} +#--------------------------------------------------------------- +# +# Process a request. This sub should shrink as each action +# gets farmed out into a separat sub that is registered +# with the dispatch hash. +# +# Parameters: +# user_input - The request received from the client (lonc). +# Returns: +# true to keep processing, false if caller should exit. +# +sub process_request { + my ($userinput) = @_; # Easier for now to break style than to + # fix all the userinput -> user_input. + my $wasenc = 0; # True if request was encrypted. +# ------------------------------------------------------------ See if encrypted + if ($userinput =~ /^enc/) { + $userinput = decipher($userinput); + $wasenc=1; + if(!$userinput) { # Cipher not defined. + &Failure($client, "error: Encrypted data without negotated key"); + return 0; + } + } + Debug("process_request: $userinput\n"); + + # + # The 'correct way' to add a command to lond is now to + # write a sub to execute it and Add it to the command dispatch + # hash via a call to register_handler.. The comments to that + # sub should give you enough to go on to show how to do this + # along with the examples that are building up as this code + # is getting refactored. Until all branches of the + # if/elseif monster below have been factored out into + # separate procesor subs, if the dispatch hash is missing + # the command keyword, we will fall through to the remainder + # of the if/else chain below in order to keep this thing in + # working order throughout the transmogrification. + + my ($command, $tail) = split(/:/, $userinput, 2); + chomp($command); + chomp($tail); + $tail =~ s/(\r)//; # This helps people debugging with e.g. telnet. + $command =~ s/(\r)//; # And this too for parameterless commands. + if(!$tail) { + $tail =""; # defined but blank. + } + + &Debug("Command received: $command, encoded = $wasenc"); + + if(defined $Dispatcher{$command}) { + + my $dispatch_info = $Dispatcher{$command}; + my $handler = $$dispatch_info[0]; + my $need_encode = $$dispatch_info[1]; + my $client_types = $$dispatch_info[2]; + Debug("Matched dispatch hash: mustencode: $need_encode " + ."ClientType $client_types"); + + # Validate the request: + + my $ok = 1; + my $requesterprivs = 0; + if(&isClient()) { + $requesterprivs |= $CLIENT_OK; + } + if(&isManager()) { + $requesterprivs |= $MANAGER_OK; + } + if($need_encode && (!$wasenc)) { + Debug("Must encode but wasn't: $need_encode $wasenc"); + $ok = 0; + } + if(($client_types & $requesterprivs) == 0) { + Debug("Client not privileged to do this operation"); + $ok = 0; + } + + if($ok) { + Debug("Dispatching to handler $command $tail"); + my $keep_going = &$handler($command, $tail, $client); + return $keep_going; + } else { + Debug("Refusing to dispatch because client did not match requirements"); + Failure($client, "refused\n", $userinput); + return 1; + } + + } + +#------------------- Commands not yet in spearate handlers. -------------- + + + +# ----------------------------------------------------------------- unsubscribe + if ($userinput =~ /^unsub/) { + if(isClient) { + my ($cmd,$fname)=split(/:/,$userinput); + if (-e $fname) { + print $client &unsub($fname,$clientip); + } else { + print $client "not_found\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ------------------------------------------------------------------- subscribe + } elsif ($userinput =~ /^sub/) { + if(isClient) { + print $client &subscribe($userinput,$clientip); + } else { + Reply($client, "refused\n", $userinput); + + } +# ------------------------------------------------------------- current version + } elsif ($userinput =~ /^currentversion/) { + if(isClient) { + my ($cmd,$fname)=split(/:/,$userinput); + print $client ¤tversion($fname)."\n"; + } else { + Reply($client, "refused\n", $userinput); + + } +# ------------------------------------------------------------------------- log + } elsif ($userinput =~ /^log/) { + if(isClient) { + my ($cmd,$udom,$uname,$what)=split(/:/,$userinput); + chomp($what); + my $proname=propath($udom,$uname); + my $now=time; + { + my $hfh; + if ($hfh=IO::File->new(">>$proname/activity.log")) { + print $hfh "$now:$clientname:$what\n"; + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." IO::File->new Failed " + ."while attempting log\n"; + } + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ------------------------------------------------------------------------- put + } elsif ($userinput =~ /^put/) { + if(isClient) { + my ($cmd,$udom,$uname,$namespace,$what) + =split(/:/,$userinput,5); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + if ($namespace ne 'roles') { + chomp($what); + my $proname=propath($udom,$uname); + my $now=time; + my @pairs=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File', + "$proname/$namespace.db", + &GDBM_WRCREAT(),0640)) { + unless ($namespace=~/^nohist\_/) { + my $hfh; + if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "P:$now:$what\n"; } + } + + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + $hash{$key}=$value; + } + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) failed ". + "while attempting put\n"; + } + } else { + print $client "error: ".($!) + ." tie(GDBM) Failed ". + "while attempting put\n"; + } + } else { + print $client "refused\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ------------------------------------------------------------------- inc + } elsif ($userinput =~ /^inc:/) { + if(isClient) { + my ($cmd,$udom,$uname,$namespace,$what) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + if ($namespace ne 'roles') { + chomp($what); + my $proname=propath($udom,$uname); + my $now=time; + my @pairs=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File', + "$proname/$namespace.db", + &GDBM_WRCREAT(),0640)) { + unless ($namespace=~/^nohist\_/) { + my $hfh; + if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "P:$now:$what\n"; } + } + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + # We could check that we have a number... + if (! defined($value) || $value eq '') { + $value = 1; + } + $hash{$key}+=$value; + } + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) failed ". + "while attempting inc\n"; + } + } else { + print $client "error: ".($!) + ." tie(GDBM) Failed ". + "while attempting inc\n"; + } + } else { + print $client "refused\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# -------------------------------------------------------------------- rolesput + } elsif ($userinput =~ /^rolesput/) { + if(isClient) { + &Debug("rolesput"); + if ($wasenc==1) { + my ($cmd,$exedom,$exeuser,$udom,$uname,$what) + =split(/:/,$userinput); + &Debug("cmd = ".$cmd." exedom= ".$exedom. + "user = ".$exeuser." udom=".$udom. + "what = ".$what); + my $namespace='roles'; + chomp($what); + my $proname=propath($udom,$uname); + my $now=time; + my @pairs=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { + { + my $hfh; + if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { + print $hfh "P:$now:$exedom:$exeuser:$what\n"; + } + } + + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + &ManagePermissions($key, $udom, $uname, + &get_auth_type( $udom, + $uname)); + $hash{$key}=$value; + } + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting rolesput\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting rolesput\n"; + } + } else { + print $client "refused\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# -------------------------------------------------------------------- rolesdel + } elsif ($userinput =~ /^rolesdel/) { + if(isClient) { + &Debug("rolesdel"); + if ($wasenc==1) { + my ($cmd,$exedom,$exeuser,$udom,$uname,$what) + =split(/:/,$userinput); + &Debug("cmd = ".$cmd." exedom= ".$exedom. + "user = ".$exeuser." udom=".$udom. + "what = ".$what); + my $namespace='roles'; + chomp($what); + my $proname=propath($udom,$uname); + my $now=time; + my @rolekeys=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { + { + my $hfh; + if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { + print $hfh "D:$now:$exedom:$exeuser:$what\n"; + } + } + foreach my $key (@rolekeys) { + delete $hash{$key}; + } + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting rolesdel\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting rolesdel\n"; + } + } else { + print $client "refused\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ------------------------------------------------------------------------- get + } elsif ($userinput =~ /^get/) { + if(isClient) { + my ($cmd,$udom,$uname,$namespace,$what) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + chomp($what); + my @queries=split(/\&/,$what); + my $proname=propath($udom,$uname); + my $qresult=''; + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { + for (my $i=0;$i<=$#queries;$i++) { + $qresult.="$hash{$queries[$i]}&"; + } + if (untie(%hash)) { + $qresult=~s/\&$//; + print $client "$qresult\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting get\n"; + } + } else { + if ($!+0 == 2) { + print $client "error:No such file or ". + "GDBM reported bad block error\n"; + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting get\n"; + } + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ------------------------------------------------------------------------ eget + } elsif ($userinput =~ /^eget/) { + if (isClient) { + my ($cmd,$udom,$uname,$namespace,$what) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + chomp($what); + my @queries=split(/\&/,$what); + my $proname=propath($udom,$uname); + my $qresult=''; + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { + for (my $i=0;$i<=$#queries;$i++) { + $qresult.="$hash{$queries[$i]}&"; + } + if (untie(%hash)) { + $qresult=~s/\&$//; + if ($cipher) { + my $cmdlength=length($qresult); + $qresult.=" "; + my $encqresult=''; + for + (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) { + $encqresult.= + unpack("H16", + $cipher->encrypt(substr($qresult,$encidx,8))); + } + print $client "enc:$cmdlength:$encqresult\n"; + } else { + print $client "error:no_key\n"; + } + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting eget\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting eget\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ------------------------------------------------------------------------- del + } elsif ($userinput =~ /^del/) { + if(isClient) { + my ($cmd,$udom,$uname,$namespace,$what) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + chomp($what); + my $proname=propath($udom,$uname); + my $now=time; + my @keys=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { + unless ($namespace=~/^nohist\_/) { + my $hfh; + if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { print $hfh "D:$now:$what\n"; } + } + foreach my $key (@keys) { + delete($hash{$key}); + } + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting del\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting del\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ------------------------------------------------------------------------ keys + } elsif ($userinput =~ /^keys/) { + if(isClient) { + my ($cmd,$udom,$uname,$namespace) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + my $proname=propath($udom,$uname); + my $qresult=''; + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { + foreach my $key (keys %hash) { + $qresult.="$key&"; + } + if (untie(%hash)) { + $qresult=~s/\&$//; + print $client "$qresult\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting keys\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting keys\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ----------------------------------------------------------------- dumpcurrent + } elsif ($userinput =~ /^currentdump/) { + if (isClient) { + my ($cmd,$udom,$uname,$namespace) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + my $qresult=''; + my $proname=propath($udom,$uname); + my %hash; + if (tie(%hash,'GDBM_File', + "$proname/$namespace.db", + &GDBM_READER(),0640)) { + # Structure of %data: + # $data{$symb}->{$parameter}=$value; + # $data{$symb}->{'v.'.$parameter}=$version; + # since $parameter will be unescaped, we do not + # have to worry about silly parameter names... + my %data = (); + while (my ($key,$value) = each(%hash)) { + my ($v,$symb,$param) = split(/:/,$key); + next if ($v eq 'version' || $symb eq 'keys'); + next if (exists($data{$symb}) && + exists($data{$symb}->{$param}) && + $data{$symb}->{'v.'.$param} > $v); + $data{$symb}->{$param}=$value; + $data{$symb}->{'v.'.$param}=$v; + } + if (untie(%hash)) { + while (my ($symb,$param_hash) = each(%data)) { + while(my ($param,$value) = each (%$param_hash)){ + next if ($param =~ /^v\./); + $qresult.=$symb.':'.$param.'='.$value.'&'; + } + } + chop($qresult); + print $client "$qresult\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting currentdump\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting currentdump\n"; + } + } else { + Reply($client, "refused\n", $userinput); + } +# ------------------------------------------------------------------------ dump + } elsif ($userinput =~ /^dump/) { + if(isClient) { + my ($cmd,$udom,$uname,$namespace,$regexp) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + if (defined($regexp)) { + $regexp=&unescape($regexp); + } else { + $regexp='.'; + } + my $qresult=''; + my $proname=propath($udom,$uname); + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { + while (my ($key,$value) = each(%hash)) { + if ($regexp eq '.') { + $qresult.=$key.'='.$value.'&'; + } else { + my $unescapeKey = &unescape($key); + if (eval('$unescapeKey=~/$regexp/')) { + $qresult.="$key=$value&"; + } + } + } + if (untie(%hash)) { + chop($qresult); + print $client "$qresult\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting dump\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting dump\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ----------------------------------------------------------------------- store + } elsif ($userinput =~ /^store/) { + if(isClient) { + my ($cmd,$udom,$uname,$namespace,$rid,$what) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + if ($namespace ne 'roles') { + chomp($what); + my $proname=propath($udom,$uname); + my $now=time; + my @pairs=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_WRCREAT(),0640)) { + unless ($namespace=~/^nohist\_/) { + my $hfh; + if ($hfh=IO::File->new(">>$proname/$namespace.hist")) { + print $hfh "P:$now:$rid:$what\n"; + } + } + my @previouskeys=split(/&/,$hash{"keys:$rid"}); + my $key; + $hash{"version:$rid"}++; + my $version=$hash{"version:$rid"}; + my $allkeys=''; + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + $allkeys.=$key.':'; + $hash{"$version:$rid:$key"}=$value; + } + $hash{"$version:$rid:timestamp"}=$now; + $allkeys.='timestamp'; + $hash{"$version:keys:$rid"}=$allkeys; + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting store\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting store\n"; + } + } else { + print $client "refused\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# --------------------------------------------------------------------- restore + } elsif ($userinput =~ /^restore/) { + if(isClient) { + my ($cmd,$udom,$uname,$namespace,$rid) + =split(/:/,$userinput); + $namespace=~s/\//\_/g; + $namespace=~s/\W//g; + chomp($rid); + my $proname=propath($udom,$uname); + my $qresult=''; + my %hash; + if (tie(%hash,'GDBM_File',"$proname/$namespace.db",&GDBM_READER(),0640)) { + my $version=$hash{"version:$rid"}; + $qresult.="version=$version&"; + my $scope; + for ($scope=1;$scope<=$version;$scope++) { + my $vkeys=$hash{"$scope:keys:$rid"}; + my @keys=split(/:/,$vkeys); + my $key; + $qresult.="$scope:keys=$vkeys&"; + foreach $key (@keys) { + $qresult.="$scope:$key=".$hash{"$scope:$rid:$key"}."&"; + } + } + if (untie(%hash)) { + $qresult=~s/\&$//; + print $client "$qresult\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting restore\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting restore\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# -------------------------------------------------------------------- chatsend + } elsif ($userinput =~ /^chatsend/) { + if(isClient) { + my ($cmd,$cdom,$cnum,$newpost)=split(/\:/,$userinput); + &chatadd($cdom,$cnum,$newpost); + print $client "ok\n"; + } else { + Reply($client, "refused\n", $userinput); + + } +# -------------------------------------------------------------------- chatretr + } elsif ($userinput =~ /^chatretr/) { + if(isClient) { + my + ($cmd,$cdom,$cnum,$udom,$uname)=split(/\:/,$userinput); + my $reply=''; + foreach (&getchat($cdom,$cnum,$udom,$uname)) { + $reply.=&escape($_).':'; + } + $reply=~s/\:$//; + print $client $reply."\n"; + } else { + Reply($client, "refused\n", $userinput); + + } +# ------------------------------------------------------------------- querysend + } elsif ($userinput =~ /^querysend/) { + if (isClient) { + my ($cmd,$query, + $arg1,$arg2,$arg3)=split(/\:/,$userinput); + $query=~s/\n*$//g; + print $client "". + sqlreply("$clientname\&$query". + "\&$arg1"."\&$arg2"."\&$arg3")."\n"; + } else { + Reply($client, "refused\n", $userinput); + + } +# ------------------------------------------------------------------ queryreply + } elsif ($userinput =~ /^queryreply/) { + if(isClient) { + my ($cmd,$id,$reply)=split(/:/,$userinput); + my $store; + my $execdir=$perlvar{'lonDaemons'}; + if ($store=IO::File->new(">$execdir/tmp/$id")) { + $reply=~s/\&/\n/g; + print $store $reply; + close $store; + my $store2=IO::File->new(">$execdir/tmp/$id.end"); + print $store2 "done\n"; + close $store2; + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." IO::File->new Failed ". + "while attempting queryreply\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ----------------------------------------------------------------- courseidput + } elsif ($userinput =~ /^courseidput/) { + if(isClient) { + my ($cmd,$udom,$what)=split(/:/,$userinput); + chomp($what); + $udom=~s/\W//g; + my $proname= + "$perlvar{'lonUsersDir'}/$udom/nohist_courseids"; + my $now=time; + my @pairs=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) { + foreach my $pair (@pairs) { + my ($key,$descr,$inst_code)=split(/=/,$pair); + $hash{$key}=$descr.':'.$inst_code.':'.$now; + } + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting courseidput\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting courseidput\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ---------------------------------------------------------------- courseiddump + } elsif ($userinput =~ /^courseiddump/) { + if(isClient) { + my ($cmd,$udom,$since,$description) + =split(/:/,$userinput); + if (defined($description)) { + $description=&unescape($description); + } else { + $description='.'; + } + unless (defined($since)) { $since=0; } + my $qresult=''; + my $proname= + "$perlvar{'lonUsersDir'}/$udom/nohist_courseids"; + my %hash; + if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) { + while (my ($key,$value) = each(%hash)) { + my ($descr,$lasttime,$inst_code); + if ($value =~ m/^([^\:]*):([^\:]*):(\d+)$/) { + ($descr,$inst_code,$lasttime)=($1,$2,$3); + } else { + ($descr,$lasttime) = split(/\:/,$value); + } + if ($lasttime<$since) { next; } + if ($description eq '.') { + $qresult.=$key.'='.$descr.':'.$inst_code.'&'; + } else { + my $unescapeVal = &unescape($descr); + if (eval('$unescapeVal=~/\Q$description\E/i')) { + $qresult.=$key.'='.$descr.':'.$inst_code.'&'; + } + } + } + if (untie(%hash)) { + chop($qresult); + print $client "$qresult\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting courseiddump\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting courseiddump\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ----------------------------------------------------------------------- idput + } elsif ($userinput =~ /^idput/) { + if(isClient) { + my ($cmd,$udom,$what)=split(/:/,$userinput); + chomp($what); + $udom=~s/\W//g; + my $proname="$perlvar{'lonUsersDir'}/$udom/ids"; + my $now=time; + my @pairs=split(/\&/,$what); + my %hash; + if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_WRCREAT(),0640)) { + { + my $hfh; + if ($hfh=IO::File->new(">>$proname.hist")) { + print $hfh "P:$now:$what\n"; + } + } + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + $hash{$key}=$value; + } + if (untie(%hash)) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting idput\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting idput\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ----------------------------------------------------------------------- idget + } elsif ($userinput =~ /^idget/) { + if(isClient) { + my ($cmd,$udom,$what)=split(/:/,$userinput); + chomp($what); + $udom=~s/\W//g; + my $proname="$perlvar{'lonUsersDir'}/$udom/ids"; + my @queries=split(/\&/,$what); + my $qresult=''; + my %hash; + if (tie(%hash,'GDBM_File',"$proname.db",&GDBM_READER(),0640)) { + for (my $i=0;$i<=$#queries;$i++) { + $qresult.="$hash{$queries[$i]}&"; + } + if (untie(%hash)) { + $qresult=~s/\&$//; + print $client "$qresult\n"; + } else { + print $client "error: ".($!+0) + ." untie(GDBM) Failed ". + "while attempting idget\n"; + } + } else { + print $client "error: ".($!+0) + ." tie(GDBM) Failed ". + "while attempting idget\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ---------------------------------------------------------------------- tmpput + } elsif ($userinput =~ /^tmpput/) { + if(isClient) { + my ($cmd,$what)=split(/:/,$userinput); + my $store; + $tmpsnum++; + my $id=$$.'_'.$clientip.'_'.$tmpsnum; + $id=~s/\W/\_/g; + $what=~s/\n//g; + my $execdir=$perlvar{'lonDaemons'}; + if ($store=IO::File->new(">$execdir/tmp/$id.tmp")) { + print $store $what; + close $store; + print $client "$id\n"; + } + else { + print $client "error: ".($!+0) + ."IO::File->new Failed ". + "while attempting tmpput\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } + +# ---------------------------------------------------------------------- tmpget + } elsif ($userinput =~ /^tmpget/) { + if(isClient) { + my ($cmd,$id)=split(/:/,$userinput); + chomp($id); + $id=~s/\W/\_/g; + my $store; + my $execdir=$perlvar{'lonDaemons'}; + if ($store=IO::File->new("$execdir/tmp/$id.tmp")) { + my $reply=<$store>; + print $client "$reply\n"; + close $store; + } + else { + print $client "error: ".($!+0) + ."IO::File->new Failed ". + "while attempting tmpget\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ---------------------------------------------------------------------- tmpdel + } elsif ($userinput =~ /^tmpdel/) { + if(isClient) { + my ($cmd,$id)=split(/:/,$userinput); + chomp($id); + $id=~s/\W/\_/g; + my $execdir=$perlvar{'lonDaemons'}; + if (unlink("$execdir/tmp/$id.tmp")) { + print $client "ok\n"; + } else { + print $client "error: ".($!+0) + ."Unlink tmp Failed ". + "while attempting tmpdel\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ----------------------------------------- portfolio directory list (portls) + } elsif ($userinput =~ /^portls/) { + if(isClient) { + my ($cmd,$uname,$udom)=split(/:/,$userinput); + my $udir=propath($udom,$uname).'/userfiles/portfolio'; + my $dirLine=''; + my $dirContents=''; + if (opendir(LSDIR,$udir.'/')){ + while ($dirLine = readdir(LSDIR)){ + $dirContents = $dirContents.$dirLine.'
'; + } + } else { + $dirContents = "No directory found\n"; + } + print $client $dirContents."\n"; + } else { + Reply($client, "refused\n", $userinput); + } +# -------------------------------------------------------------------------- ls + } elsif ($userinput =~ /^ls/) { + if(isClient) { + my $obs; + my $rights; + my ($cmd,$ulsdir)=split(/:/,$userinput); + my $ulsout=''; + my $ulsfn; + if (-e $ulsdir) { + if(-d $ulsdir) { + if (opendir(LSDIR,$ulsdir)) { + while ($ulsfn=readdir(LSDIR)) { + undef $obs, $rights; + my @ulsstats=stat($ulsdir.'/'.$ulsfn); + #We do some obsolete checking here + if(-e $ulsdir.'/'.$ulsfn.".meta") { + open(FILE, $ulsdir.'/'.$ulsfn.".meta"); + my @obsolete=; + foreach my $obsolete (@obsolete) { + if($obsolete =~ m|()(on)|) { $obs = 1; } + if($obsolete =~ m|()(default)|) { $rights = 1; } + } + } + $ulsout.=$ulsfn.'&'.join('&',@ulsstats); + if($obs eq '1') { $ulsout.="&1"; } + else { $ulsout.="&0"; } + if($rights eq '1') { $ulsout.="&1:"; } + else { $ulsout.="&0:"; } + } + closedir(LSDIR); + } + } else { + my @ulsstats=stat($ulsdir); + $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; + } + } else { + $ulsout='no_such_dir'; + } + if ($ulsout eq '') { $ulsout='empty'; } + print $client "$ulsout\n"; + } else { + Reply($client, "refused\n", $userinput); + + } +# ----------------------------------------------------------------- setannounce + } elsif ($userinput =~ /^setannounce/) { + if (isClient) { + my ($cmd,$announcement)=split(/:/,$userinput); + chomp($announcement); + $announcement=&unescape($announcement); + if (my $store=IO::File->new('>'.$perlvar{'lonDocRoot'}. + '/announcement.txt')) { + print $store $announcement; + close $store; + print $client "ok\n"; + } else { + print $client "error: ".($!+0)."\n"; + } + } else { + Reply($client, "refused\n", $userinput); + + } +# ------------------------------------------------------------------ Hanging up + } elsif (($userinput =~ /^exit/) || + ($userinput =~ /^init/)) { # no restrictions. + &logthis( + "Client $clientip ($clientname) hanging up: $userinput"); + print $client "bye\n"; + $client->shutdown(2); # shutdown the socket forcibly. + $client->close(); + return 0; + +# ---------------------------------- set current host/domain + } elsif ($userinput =~ /^sethost:/) { + if (isClient) { + print $client &sethost($userinput)."\n"; + } else { + print $client "refused\n"; + } +#---------------------------------- request file (?) version. + } elsif ($userinput =~/^version:/) { + if (isClient) { + print $client &version($userinput)."\n"; + } else { + print $client "refused\n"; + } +#------------------------------- is auto-enrollment enabled? + } elsif ($userinput =~/^autorun:/) { + if (isClient) { + my ($cmd,$cdom) = split(/:/,$userinput); + my $outcome = &localenroll::run($cdom); + print $client "$outcome\n"; + } else { + print $client "0\n"; + } +#------------------------------- get official sections (for auto-enrollment). + } elsif ($userinput =~/^autogetsections:/) { + if (isClient) { + my ($cmd,$coursecode,$cdom)=split(/:/,$userinput); + my @secs = &localenroll::get_sections($coursecode,$cdom); + my $seclist = &escape(join(':',@secs)); + print $client "$seclist\n"; + } else { + print $client "refused\n"; + } +#----------------------- validate owner of new course section (for auto-enrollment). + } elsif ($userinput =~/^autonewcourse:/) { + if (isClient) { + my ($cmd,$inst_course_id,$owner,$cdom)=split(/:/,$userinput); + my $outcome = &localenroll::new_course($inst_course_id,$owner,$cdom); + print $client "$outcome\n"; + } else { + print $client "refused\n"; + } +#-------------- validate course section in schedule of classes (for auto-enrollment). + } elsif ($userinput =~/^autovalidatecourse:/) { + if (isClient) { + my ($cmd,$inst_course_id,$cdom)=split(/:/,$userinput); + my $outcome=&localenroll::validate_courseID($inst_course_id,$cdom); + print $client "$outcome\n"; + } else { + print $client "refused\n"; + } +#--------------------------- create password for new user (for auto-enrollment). + } elsif ($userinput =~/^autocreatepassword:/) { + if (isClient) { + my ($cmd,$authparam,$cdom)=split(/:/,$userinput); + my ($create_passwd,$authchk); + ($authparam,$create_passwd,$authchk) = &localenroll::create_password($authparam,$cdom); + print $client &escape($authparam.':'.$create_passwd.':'.$authchk)."\n"; + } else { + print $client "refused\n"; + } +#--------------------------- read and remove temporary files (for auto-enrollment). + } elsif ($userinput =~/^autoretrieve:/) { + if (isClient) { + my ($cmd,$filename) = split(/:/,$userinput); + my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename; + if ( (-e $source) && ($filename ne '') ) { + my $reply = ''; + if (open(my $fh,$source)) { + while (<$fh>) { + chomp($_); + $_ =~ s/^\s+//g; + $_ =~ s/\s+$//g; + $reply .= $_; + } + close($fh); + print $client &escape($reply)."\n"; +# unlink($source); + } else { + print $client "error\n"; + } + } else { + print $client "error\n"; + } + } else { + print $client "refused\n"; + } +#--------------------- read and retrieve institutional code format (for support form). + } elsif ($userinput =~/^autoinstcodeformat:/) { + if (isClient) { + my $reply; + my($cmd,$cdom,$course) = split(/:/,$userinput); + my @pairs = split/\&/,$course; + my %instcodes = (); + my %codes = (); + my @codetitles = (); + my %cat_titles = (); + my %cat_order = (); + foreach (@pairs) { + my ($key,$value) = split/=/,$_; + $instcodes{&unescape($key)} = &unescape($value); + } + my $formatreply = &localenroll::instcode_format($cdom,\%instcodes,\%codes,\@codetitles,\%cat_titles,\%cat_order); + if ($formatreply eq 'ok') { + my $codes_str = &hash2str(%codes); + my $codetitles_str = &array2str(@codetitles); + my $cat_titles_str = &hash2str(%cat_titles); + my $cat_order_str = &hash2str(%cat_order); + print $client $codes_str.':'.$codetitles_str.':'.$cat_titles_str.':'.$cat_order_str."\n"; + } + } else { + print $client "refused\n"; + } +# ------------------------------------------------------------- unknown command + + } else { + # unknown command + print $client "unknown_cmd\n"; + } +# -------------------------------------------------------------------- complete + Debug("process_request - returning 1"); + return 1; +} +# +# Decipher encoded traffic +# Parameters: +# input - Encoded data. +# Returns: +# Decoded data or undef if encryption key was not yet negotiated. +# Implicit input: +# cipher - This global holds the negotiated encryption key. +# +sub decipher { + my ($input) = @_; + my $output = ''; + + + if($cipher) { + my($enc, $enclength, $encinput) = split(/:/, $input); + for(my $encidx = 0; $encidx < length($encinput); $encidx += 16) { + $output .= + $cipher->decrypt(pack("H16", substr($encinput, $encidx, 16))); + } + return substr($output, 0, $enclength); + } else { + return undef; + } +} + +# +# Register a command processor. This function is invoked to register a sub +# to process a request. Once registered, the ProcessRequest sub can automatically +# dispatch requests to an appropriate sub, and do the top level validity checking +# as well: +# - Is the keyword recognized. +# - Is the proper client type attempting the request. +# - Is the request encrypted if it has to be. +# Parameters: +# $request_name - Name of the request being registered. +# This is the command request that will match +# against the hash keywords to lookup the information +# associated with the dispatch information. +# $procedure - Reference to a sub to call to process the request. +# All subs get called as follows: +# Procedure($cmd, $tail, $replyfd, $key) +# $cmd - the actual keyword that invoked us. +# $tail - the tail of the request that invoked us. +# $replyfd- File descriptor connected to the client +# $must_encode - True if the request must be encoded to be good. +# $client_ok - True if it's ok for a client to request this. +# $manager_ok - True if it's ok for a manager to request this. +# Side effects: +# - On success, the Dispatcher hash has an entry added for the key $RequestName +# - On failure, the program will die as it's a bad internal bug to try to +# register a duplicate command handler. +# +sub register_handler { + my ($request_name,$procedure,$must_encode, $client_ok,$manager_ok) = @_; + + # Don't allow duplication# + + if (defined $Dispatcher{$request_name}) { + die "Attempting to define a duplicate request handler for $request_name\n"; + } + # Build the client type mask: + + my $client_type_mask = 0; + if($client_ok) { + $client_type_mask |= $CLIENT_OK; + } + if($manager_ok) { + $client_type_mask |= $MANAGER_OK; + } + + # Enter the hash: + + my @entry = ($procedure, $must_encode, $client_type_mask); + + $Dispatcher{$request_name} = \@entry; + +} + + +#------------------------------------------------------------------ + + + + # # Convert an error return code from lcpasswd to a string value. # @@ -3264,7 +3166,7 @@ sub catchexception { $SIG{'QUIT'}='DEFAULT'; $SIG{__DIE__}='DEFAULT'; &status("Catching exception"); - &logthis("CRITICAL: " + &logthis("CRITICAL: " ."ABNORMAL EXIT. Child $$ for server $thisserver died through " ."a crash with this error msg->[$error]"); &logthis('Famous last words: '.$status.' - '.$lastlog); @@ -3272,14 +3174,14 @@ sub catchexception { $server->close(); die($error); } - sub timeout { &status("Handling Timeout"); - &logthis("CRITICAL: TIME OUT ".$$.""); + &logthis("CRITICAL: TIME OUT ".$$.""); &catchexception('Timeout'); } # -------------------------------- Set signal handlers to record abnormal exits + $SIG{'QUIT'}=\&catchexception; $SIG{__DIE__}=\&catchexception; @@ -3327,18 +3229,26 @@ $server = IO::Socket::INET->new(LocalPor # global variables my %children = (); # keys are current child process IDs -my $children = 0; # current number of children sub REAPER { # takes care of dead children $SIG{CHLD} = \&REAPER; &status("Handling child death"); - my $pid = wait; - if (defined($children{$pid})) { - &logthis("Child $pid died"); - $children --; - delete $children{$pid}; - } else { - &logthis("Unknown Child $pid died"); + my $pid; + do { + $pid = waitpid(-1,&WNOHANG()); + if (defined($children{$pid})) { + &logthis("Child $pid died"); + delete($children{$pid}); + } elsif ($pid > 0) { + &logthis("Unknown Child $pid died"); + } + } while ( $pid > 0 ); + foreach my $child (keys(%children)) { + $pid = waitpid($child,&WNOHANG()); + if ($pid > 0) { + &logthis("Child $child - $pid looks like we missed it's death"); + delete($children{$pid}); + } } &status("Finished Handling child death"); } @@ -3350,7 +3260,7 @@ sub HUNTSMAN { # si &logthis("Free socket: ".shutdown($server,2)); # free up socket my $execdir=$perlvar{'lonDaemons'}; unlink("$execdir/logs/lond.pid"); - &logthis("CRITICAL: Shutting down"); + &logthis("CRITICAL: Shutting down"); &status("Done killing children"); exit; # clean up with dignity } @@ -3360,7 +3270,7 @@ sub HUPSMAN { # sig &status("Killing children for restart (HUP)"); kill 'INT' => keys %children; &logthis("Free socket: ".shutdown($server,2)); # free up socket - &logthis("CRITICAL: Restarting"); + &logthis("CRITICAL: Restarting"); my $execdir=$perlvar{'lonDaemons'}; unlink("$execdir/logs/lond.pid"); &status("Restarting self (HUP)"); @@ -3370,7 +3280,7 @@ sub HUPSMAN { # sig # # Kill off hashes that describe the host table prior to re-reading it. # Hashes affected are: -# %hostid, %hostdom %hostip +# %hostid, %hostdom %hostip %hostdns. # sub KillHostHashes { foreach my $key (keys %hostid) { @@ -3382,6 +3292,9 @@ sub KillHostHashes { foreach my $key (keys %hostip) { delete $hostip{$key}; } + foreach my $key (keys %hostdns) { + delete $hostdns{$key}; + } } # # Read in the host table from file and distribute it into the various hashes: @@ -3392,14 +3305,22 @@ sub KillHostHashes { sub ReadHostTable { open (CONFIG,"$perlvar{'lonTabDir'}/hosts.tab") || die "Can't read host file"; - + my $myloncapaname = $perlvar{'lonHostID'}; + Debug("My loncapa name is : $myloncapaname"); while (my $configline=) { - my ($id,$domain,$role,$name,$ip)=split(/:/,$configline); - chomp($ip); $ip=~s/\D+$//; - $hostid{$ip}=$id; - $hostdom{$id}=$domain; - $hostip{$id}=$ip; - if ($id eq $perlvar{'lonHostID'}) { $thisserver=$name; } + if (!($configline =~ /^\s*\#/)) { + my ($id,$domain,$role,$name,$ip)=split(/:/,$configline); + chomp($ip); $ip=~s/\D+$//; + $hostid{$ip}=$id; # LonCAPA name of host by IP. + $hostdom{$id}=$domain; # LonCAPA domain name of host. + $hostip{$id}=$ip; # IP address of host. + $hostdns{$name} = $id; # LonCAPA name of host by DNS. + + if ($id eq $perlvar{'lonHostID'}) { + Debug("Found me in the host table: $name"); + $thisserver=$name; + } + } } close(CONFIG); } @@ -3461,14 +3382,16 @@ sub checkchildren { &logthis('Going to check on the children'); my $docdir=$perlvar{'lonDocRoot'}; foreach (sort keys %children) { - sleep 1; + #sleep 1; unless (kill 'USR1' => $_) { &logthis ('Child '.$_.' is dead'); &logstatus($$.' is dead'); + delete($children{$_}); } } sleep 5; - $SIG{ALRM} = sub { die "timeout" }; + $SIG{ALRM} = sub { Debug("timeout"); + die "timeout"; }; $SIG{__DIE__} = 'DEFAULT'; &status("Checking on the children (waiting for reports)"); foreach (sort keys %children) { @@ -3482,6 +3405,7 @@ sub checkchildren { #my $result=`echo 'Killed lond process $_.' | mailto $emailto -s '$subj' > /dev/null`; #$execdir=$perlvar{'lonDaemons'}; #$result=`/bin/cp $execdir/logs/lond.log $execdir/logs/lond.log.$_`; + delete($children{$_}); alarm(0); } } @@ -3489,6 +3413,7 @@ sub checkchildren { $SIG{ALRM} = 'DEFAULT'; $SIG{__DIE__} = \&catchexception; &status("Finished checking children"); + &logthis('Finished Checking children'); } # --------------------------------------------------------------------- Logging @@ -3519,22 +3444,17 @@ sub Debug { # reply - Text to send to client. # request - Original request from client. # -# Note: This increments Transactions -# sub Reply { - alarm(120); - my $fd = shift; - my $reply = shift; - my $request = shift; - + my ($fd, $reply, $request) = @_; print $fd $reply; Debug("Request was $request Reply was $reply"); $Transactions++; - alarm(0); } + + # # Sub to report a failure. # This function: @@ -3551,32 +3471,33 @@ sub Reply { # client: # sub Failure { - my $fd = shift; - my $reply = shift; - my $request = shift; + my $fd = shift; + my $reply = shift; + my $request = shift; - $Failures++; - Reply($fd, $reply, $request); # That's simple eh? + $Failures++; + Reply($fd, $reply, $request); # That's simple eh? } # ------------------------------------------------------------------ Log status sub logstatus { - &status("Doing logging"); - my $docdir=$perlvar{'lonDocRoot'}; - { - my $fh=IO::File->new(">>$docdir/lon-status/londstatus.txt"); - print $fh $$."\t".$currenthostid."\t".$status."\t".$lastlog."\n"; - $fh->close(); - } - &status("Finished londstatus.txt"); - { - my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt"); - print $fh $status."\n".$lastlog."\n".time; - $fh->close(); - } - ResetStatistics; - &status("Finished logging"); - + &status("Doing logging"); + my $docdir=$perlvar{'lonDocRoot'}; + { + my $fh=IO::File->new(">$docdir/lon-status/londchld/$$.txt"); + print $fh $status."\n".$lastlog."\n".time."\n$keymode"; + $fh->close(); + } + &status("Finished $$.txt"); + { + open(LOG,">>$docdir/lon-status/londstatus.txt"); + flock(LOG,LOCK_EX); + print LOG $$."\t".$clientname."\t".$currenthostid."\t" + .$status."\t".$lastlog."\t $keymode\n"; + flock(DB,LOCK_UN); + close(LOG); + } + &status("Finished logging"); } sub initnewstatus { @@ -3598,11 +3519,8 @@ sub status { my $what=shift; my $now=time; my $local=localtime($now); - my $status = "lond: $what $local "; - if($Transactions) { - $status .= " Transactions: $Transactions Failed; $Failures"; - } - $0=$status; + $status=$local.': '.$what; + $0='lond: '.$what.' '.$local; } # -------------------------------------------------------- Escape Special Chars @@ -3635,11 +3553,11 @@ sub reconlonc { kill USR1 => $loncpid; } else { &logthis( - "CRITICAL: " + "CRITICAL: " ."lonc at pid $loncpid not responding, giving up"); } } else { - &logthis('CRITICAL: lonc not running, giving up'); + &logthis('CRITICAL: lonc not running, giving up'); } } @@ -3743,7 +3661,7 @@ my $execdir=$perlvar{'lonDaemons'}; open (PIDSAVE,">$execdir/logs/lond.pid"); print PIDSAVE "$$\n"; close(PIDSAVE); -&logthis("CRITICAL: ---------- Starting ----------"); +&logthis("CRITICAL: ---------- Starting ----------"); &status('Starting'); @@ -3761,7 +3679,6 @@ $SIG{USR2} = \&UpdateHosts; ReadHostTable; - # -------------------------------------------------------------- # Accept connections. When a connection comes in, it is validated # and if good, a child process is created to process transactions @@ -3777,6 +3694,7 @@ while (1) { sub make_new_child { my $pid; +# my $cipher; # Now global my $sigset; $client = shift; @@ -3798,15 +3716,27 @@ sub make_new_child { # the pid hash. # my $caller = getpeername($client); - my ($port,$iaddr)=unpack_sockaddr_in($caller); - $clientip=inet_ntoa($iaddr); + my ($port,$iaddr); + if (defined($caller) && length($caller) > 0) { + ($port,$iaddr)=unpack_sockaddr_in($caller); + } else { + &logthis("Unable to determine who caller was, getpeername returned nothing"); + } + if (defined($iaddr)) { + $clientip = inet_ntoa($iaddr); + Debug("Connected with $clientip"); + $clientdns = gethostbyaddr($iaddr, AF_INET); + Debug("Connected with $clientdns by name"); + } else { + &logthis("Unable to determine clientip"); + $clientip='Unavailable'; + } if ($pid) { # Parent records the child's birth and returns. sigprocmask(SIG_UNBLOCK, $sigset) or die "Can't unblock SIGINT for fork: $!\n"; $children{$pid} = $clientip; - $children++; &status('Started child '.$pid); return; } else { @@ -3823,8 +3753,8 @@ sub make_new_child { sigprocmask(SIG_UNBLOCK, $sigset) or die "Can't unblock SIGINT for fork: $!\n"; - - +# my $tmpsnum=0; # Now global +#---------------------------------------------------- kerberos 5 initialization &Authen::Krb5::init_context(); &Authen::Krb5::init_ets(); @@ -3832,7 +3762,7 @@ sub make_new_child { # ============================================================================= # do something with the connection # ----------------------------------------------------------------------------- - # see if we know client and check for spoof IP by challenge + # see if we know client and 'check' for spoof IP by ineffective challenge ReadManagerTable; # May also be a manager!! @@ -3850,6 +3780,7 @@ sub make_new_child { $clientname = $managers{$clientip}; } my $clientok; + if ($clientrec || $ismanager) { &status("Waiting for init from $clientip $clientname"); &logthis('INFO: Connection, '. @@ -3857,34 +3788,94 @@ sub make_new_child { " ($clientname) connection type = $ConnectionType " ); &status("Connecting $clientip ($clientname))"); my $remotereq=<$client>; - $remotereq=~s/[^\w:]//g; + chomp($remotereq); + Debug("Got init: $remotereq"); + my $inikeyword = split(/:/, $remotereq); if ($remotereq =~ /^init/) { &sethost("sethost:$perlvar{'lonHostID'}"); - my $challenge="$$".time; - print $client "$challenge\n"; - &status( - "Waiting for challenge reply from $clientip ($clientname)"); - $remotereq=<$client>; - $remotereq=~s/\W//g; - if ($challenge eq $remotereq) { - $clientok=1; - print $client "ok\n"; + # + # If the remote is attempting a local init... give that a try: + # + my ($i, $inittype) = split(/:/, $remotereq); + + # If the connection type is ssl, but I didn't get my + # certificate files yet, then I'll drop back to + # insecure (if allowed). + + if($inittype eq "ssl") { + my ($ca, $cert) = lonssl::CertificateFile; + my $kfile = lonssl::KeyFile; + if((!$ca) || + (!$cert) || + (!$kfile)) { + $inittype = ""; # This forces insecure attempt. + &logthis(" Certificates not " + ."installed -- trying insecure auth"); + } else { # SSL certificates are in place so + } # Leave the inittype alone. + } + + if($inittype eq "local") { + my $key = LocalConnection($client, $remotereq); + if($key) { + Debug("Got local key $key"); + $clientok = 1; + my $cipherkey = pack("H32", $key); + $cipher = new IDEA($cipherkey); + print $client "ok:local\n"; + &logthis('"); + $keymode = "local" + } else { + Debug("Failed to get local key"); + $clientok = 0; + shutdown($client, 3); + close $client; + } + } elsif ($inittype eq "ssl") { + my $key = SSLConnection($client); + if ($key) { + $clientok = 1; + my $cipherkey = pack("H32", $key); + $cipher = new IDEA($cipherkey); + &logthis('' + ."Successfull ssl authentication with $clientname "); + $keymode = "ssl"; + + } else { + $clientok = 0; + close $client; + } + } else { - &logthis( - "WARNING: $clientip did not reply challenge"); - &status('No challenge reply '.$clientip); + my $ok = InsecureConnection($client); + if($ok) { + $clientok = 1; + &logthis('' + ."Successful insecure authentication with $clientname "); + print $client "ok\n"; + $keymode = "insecure"; + } else { + &logthis('' + ."Attempted insecure connection disallowed "); + close $client; + $clientok = 0; + + } } } else { &logthis( - "WARNING: " + "WARNING: " ."$clientip failed to initialize: >$remotereq< "); &status('No init '.$clientip); } + } else { &logthis( - "WARNING: Unknown client $clientip"); + "WARNING: Unknown client $clientip"); &status('Hung up on '.$clientip); } + if ($clientok) { # ---------------- New known client connecting, could mean machine online again @@ -3896,31 +3887,31 @@ sub make_new_child { } &reconlonc("$perlvar{'lonSockDir'}/$id"); } - &logthis("Established connection: $clientname"); + &logthis("Established connection: $clientname"); &status('Will listen to '.$clientname); - - ResetStatistics(); - # ------------------------------------------------------------ Process requests - my $KeepGoing = 1; - while ((my $userinput=GetRequest) && $KeepGoing) { - $KeepGoing = ProcessRequest($userinput); -# -------------------------------------------------------------------- complete - - &status('Listening to '.$clientname); + my $keep_going = 1; + my $user_input; + while(($user_input = get_request) && $keep_going) { + alarm(120); + Debug("Main: Got $user_input\n"); + $keep_going = &process_request($user_input); + alarm(0); + &status('Listening to '.$clientname." ($keymode)"); } + # --------------------------------------------- client unknown or fishy, refuse - } else { + } else { print $client "refused\n"; $client->close(); - &logthis("WARNING: " + &logthis("WARNING: " ."Rejected client $clientip, closing connection"); } - } + } # ============================================================================= - &logthis("CRITICAL: " + &logthis("CRITICAL: " ."Disconnect from $clientip ($clientname)"); @@ -3945,13 +3936,10 @@ sub make_new_child { # sub ManagePermissions { - my $request = shift; - my $domain = shift; - my $user = shift; - my $authtype= shift; + + my ($request, $domain, $user, $authtype) = @_; # See if the request is of the form /$domain/_au - &logthis("ruequest is $request"); if($request =~ /^(\/$domain\/_au)$/) { # It's an author rolesput... my $execdir = $perlvar{'lonDaemons'}; my $userhome= "/home/$user" ; @@ -3959,17 +3947,89 @@ sub ManagePermissions system("$execdir/lchtmldir $userhome $user $authtype"); } } + + +# +# Return the full path of a user password file, whether it exists or not. +# Parameters: +# domain - Domain in which the password file lives. +# user - name of the user. +# Returns: +# Full passwd path: # -# GetAuthType - Determines the authorization type of a user in a domain. +sub password_path { + my ($domain, $user) = @_; + + + my $path = &propath($domain, $user); + $path .= "/passwd"; + + return $path; +} + +# Password Filename +# Returns the path to a passwd file given domain and user... only if +# it exists. +# Parameters: +# domain - Domain in which to search. +# user - username. +# Returns: +# - If the password file exists returns its path. +# - If the password file does not exist, returns undefined. +# +sub password_filename { + my ($domain, $user) = @_; + + Debug ("PasswordFilename called: dom = $domain user = $user"); + + my $path = &password_path($domain, $user); + Debug("PasswordFilename got path: $path"); + if(-e $path) { + return $path; + } else { + return undef; + } +} + +# +# Rewrite the contents of the user's passwd file. +# Parameters: +# domain - domain of the user. +# name - User's name. +# contents - New contents of the file. +# Returns: +# 0 - Failed. +# 1 - Success. +# +sub rewrite_password_file { + my ($domain, $user, $contents) = @_; + + my $file = &password_filename($domain, $user); + if (defined $file) { + my $pf = IO::File->new(">$file"); + if($pf) { + print $pf "$contents\n"; + return 1; + } else { + return 0; + } + } else { + return 0; + } + +} + +# +# get_auth_type - Determines the authorization type of a user in a domain. # Returns the authorization type or nouser if there is no such user. # -sub GetAuthType +sub get_auth_type { - my $domain = shift; - my $user = shift; - Debug("GetAuthType( $domain, $user ) \n"); + my ($domain, $user) = @_; + + Debug("get_auth_type( $domain, $user ) \n"); my $proname = &propath($domain, $user); my $passwdfile = "$proname/passwd"; if( -e $passwdfile ) { @@ -3985,13 +4045,132 @@ sub GetAuthType } return "$authtype:$availinfo"; - } - else { + } else { Debug("Returning nouser"); return "nouser"; } } +# +# Validate a user given their domain, name and password. This utility +# function is used by both AuthenticateHandler and ChangePasswordHandler +# to validate the login credentials of a user. +# Parameters: +# $domain - The domain being logged into (this is required due to +# the capability for multihomed systems. +# $user - The name of the user being validated. +# $password - The user's propoposed password. +# +# Returns: +# 1 - The domain,user,pasword triplet corresponds to a valid +# user. +# 0 - The domain,user,password triplet is not a valid user. +# +sub validate_user { + my ($domain, $user, $password) = @_; + + + # Why negative ~pi you may well ask? Well this function is about + # authentication, and therefore very important to get right. + # I've initialized the flag that determines whether or not I've + # validated correctly to a value it's not supposed to get. + # At the end of this function. I'll ensure that it's not still that + # value so we don't just wind up returning some accidental value + # as a result of executing an unforseen code path that + # did not set $validated. + + my $validated = -3.14159; + + # How we authenticate is determined by the type of authentication + # the user has been assigned. If the authentication type is + # "nouser", the user does not exist so we will return 0. + + my $contents = &get_auth_type($domain, $user); + my ($howpwd, $contentpwd) = split(/:/, $contents); + + my $null = pack("C",0); # Used by kerberos auth types. + + if ($howpwd ne 'nouser') { + + if($howpwd eq "internal") { # Encrypted is in local password file. + $validated = (crypt($password, $contentpwd) eq $contentpwd); + } + elsif ($howpwd eq "unix") { # User is a normal unix user. + $contentpwd = (getpwnam($user))[1]; + if($contentpwd) { + if($contentpwd eq 'x') { # Shadow password file... + my $pwauth_path = "/usr/local/sbin/pwauth"; + open PWAUTH, "|$pwauth_path" or + die "Cannot invoke authentication"; + print PWAUTH "$user\n$password\n"; + close PWAUTH; + $validated = ! $?; + + } else { # Passwords in /etc/passwd. + $validated = (crypt($password, + $contentpwd) eq $contentpwd); + } + } else { + $validated = 0; + } + } + elsif ($howpwd eq "krb4") { # user is in kerberos 4 auth. domain. + if(! ($password =~ /$null/) ) { + my $k4error = &Authen::Krb4::get_pw_in_tkt($user, + "", + $contentpwd,, + 'krbtgt', + $contentpwd, + 1, + $password); + if(!$k4error) { + $validated = 1; + } else { + $validated = 0; + &logthis('krb4: '.$user.', '.$contentpwd.', '. + &Authen::Krb4::get_err_txt($Authen::Krb4::error)); + } + } else { + $validated = 0; # Password has a match with null. + } + } elsif ($howpwd eq "krb5") { # User is in kerberos 5 auth. domain. + if(!($password =~ /$null/)) { # Null password not allowed. + my $krbclient = &Authen::Krb5::parse_name($user.'@' + .$contentpwd); + my $krbservice = "krbtgt/".$contentpwd."\@".$contentpwd; + my $krbserver = &Authen::Krb5::parse_name($krbservice); + my $credentials= &Authen::Krb5::cc_default(); + $credentials->initialize($krbclient); + my $krbreturn = &Authen::KRb5::get_in_tkt_with_password($krbclient, + $krbserver, + $password, + $credentials); + $validated = ($krbreturn == 1); + } else { + $validated = 0; + } + } elsif ($howpwd eq "localauth") { + # Authenticate via installation specific authentcation method: + $validated = &localauth::localauth($user, + $password, + $contentpwd); + } else { # Unrecognized auth is also bad. + $validated = 0; + } + } else { + $validated = 0; + } + # + # $validated has the correct stat of the authentication: + # + + unless ($validated != -3.14159) { + die "ValidateUser - failed to set the value of validated"; + } + return $validated; +} + + sub addline { my ($fname,$hostid,$ip,$newline)=@_; my $contents; @@ -4076,17 +4255,36 @@ sub chatadd { sub unsub { my ($fname,$clientip)=@_; my $result; + my $unsubs = 0; # Number of successful unsubscribes: + + + # An old way subscriptions were handled was to have a + # subscription marker file: + + Debug("Attempting unlink of $fname.$clientname"); if (unlink("$fname.$clientname")) { - $result="ok\n"; - } else { - $result="not_subscribed\n"; - } + $unsubs++; # Successful unsub via marker file. + } + + # The more modern way to do it is to have a subscription list + # file: + if (-e "$fname.subscription") { my $found=&addline($fname,$clientname,$clientip,''); - if ($found) { $result="ok\n"; } + if ($found) { + $unsubs++; + } + } + + # If either or both of these mechanisms succeeded in unsubscribing a + # resource we can return ok: + + if($unsubs) { + $result = "ok\n"; } else { - if ($result != "ok\n") { $result="not_subscribed\n"; } + $result = "not_subscribed\n"; } + return $result; } @@ -4208,7 +4406,19 @@ sub make_passwd_file { } } elsif ($umode eq 'unix') { { - my $execpath="$perlvar{'lonDaemons'}/"."lcuseradd"; + # + # Don't allow the creation of privileged accounts!!! that would + # be real bad!!! + # + my $uid = getpwnam($uname); + if((defined $uid) && ($uid == 0)) { + &logthis(">>>Attempted to create privilged account blocked"); + return "no_priv_account_error\n"; + } + + my $execpath ="$perlvar{'lonDaemons'}/"."lcuseradd"; + + my $lc_error_file = $execdir."/tmp/lcuseradd".$$.".status"; { &Debug("Executing external: ".$execpath); &Debug("user = ".$uname.", Password =". $npass); @@ -4216,17 +4426,27 @@ sub make_passwd_file { print $se "$uname\n"; print $se "$npass\n"; print $se "$npass\n"; + print $se "$lc_error_file\n"; # Status -> unique file. } - my $useraddok = $?; + my $error = IO::File->new("< $lc_error_file"); + my $useraddok = <$error>; + $error->close; + unlink($lc_error_file); + + chomp $useraddok; + if($useraddok > 0) { - &logthis("Failed lcuseradd: ".&lcuseraddstrerror($useraddok)); + my $error_text = &lcuseraddstrerror($useraddok); + &logthis("Failed lcuseradd: $error_text"); + $result = "lcuseradd_failed:$error_text\n"; + } else { + my $pf = IO::File->new(">$passfilename"); + print $pf "unix:\n"; } - my $pf = IO::File->new(">$passfilename"); - print $pf "unix:\n"; } } elsif ($umode eq 'none') { { - my $pf = IO::File->new(">$passfilename"); + my $pf = IO::File->new("> $passfilename"); print $pf "none:\n"; } } else { @@ -4240,7 +4460,7 @@ sub sethost { my (undef,$hostid)=split(/:/,$remotereq); if (!defined($hostid)) { $hostid=$perlvar{'lonHostID'}; } if ($hostip{$perlvar{'lonHostID'}} eq $hostip{$hostid}) { - $currenthostid=$hostid; + $currenthostid =$hostid; $currentdomainid=$hostdom{$hostid}; &logthis("Setting hostid to $hostid, and domain to $currentdomainid"); } else { @@ -4256,10 +4476,8 @@ sub version { $remoteVERSION=(split(/:/,$userinput))[1]; return "version:$VERSION"; } -############## >>>>>>>>>>>>>>>>>>>>>>>>>> FUTUREWORK <<<<<<<<<<<<<<<<<<<<<<<<<<<< + #There is a copy of this in lonnet.pm -# Can we hoist these lil' things out into common places? -# sub userload { my $numusers=0; { @@ -4282,6 +4500,74 @@ sub userload { return $userloadpercent; } +# Routines for serializing arrays and hashes (copies from lonnet) + +sub array2str { + my (@array) = @_; + my $result=&arrayref2str(\@array); + $result=~s/^__ARRAY_REF__//; + $result=~s/__END_ARRAY_REF__$//; + return $result; +} + +sub arrayref2str { + my ($arrayref) = @_; + my $result='__ARRAY_REF__'; + foreach my $elem (@$arrayref) { + if(ref($elem) eq 'ARRAY') { + $result.=&arrayref2str($elem).'&'; + } elsif(ref($elem) eq 'HASH') { + $result.=&hashref2str($elem).'&'; + } elsif(ref($elem)) { + #print("Got a ref of ".(ref($elem))." skipping."); + } else { + $result.=&escape($elem).'&'; + } + } + $result=~s/\&$//; + $result .= '__END_ARRAY_REF__'; + return $result; +} + +sub hash2str { + my (%hash) = @_; + my $result=&hashref2str(\%hash); + $result=~s/^__HASH_REF__//; + $result=~s/__END_HASH_REF__$//; + return $result; +} + +sub hashref2str { + my ($hashref)=@_; + my $result='__HASH_REF__'; + foreach (sort(keys(%$hashref))) { + if (ref($_) eq 'ARRAY') { + $result.=&arrayref2str($_).'='; + } elsif (ref($_) eq 'HASH') { + $result.=&hashref2str($_).'='; + } elsif (ref($_)) { + $result.='='; + #print("Got a ref of ".(ref($_))." skipping."); + } else { + if ($_) {$result.=&escape($_).'=';} else { last; } + } + + if(ref($hashref->{$_}) eq 'ARRAY') { + $result.=&arrayref2str($hashref->{$_}).'&'; + } elsif(ref($hashref->{$_}) eq 'HASH') { + $result.=&hashref2str($hashref->{$_}).'&'; + } elsif(ref($hashref->{$_})) { + $result.='&'; + #print("Got a ref of ".(ref($hashref->{$_}))." skipping."); + } else { + $result.=&escape($hashref->{$_}).'&'; + } + } + $result=~s/\&$//; + $result .= '__END_HASH_REF__'; + return $result; +} + # ----------------------------------- POD (plain old documentation, CPAN style) =head1 NAME