--- loncom/lond 2013/03/01 04:49:10 1.498 +++ loncom/lond 2017/02/28 05:42:06 1.532 @@ -2,7 +2,7 @@ # The LearningOnline Network # lond "LON Daemon" Server (port "LOND" 5663) # -# $Id: lond,v 1.498 2013/03/01 04:49:10 raeburn Exp $ +# $Id: lond,v 1.532 2017/02/28 05:42:06 raeburn Exp $ # # Copyright Michigan State University Board of Trustees # @@ -15,7 +15,6 @@ # # LON-CAPA is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of - # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # @@ -36,12 +35,13 @@ use LONCAPA; use LONCAPA::Configuration; use LONCAPA::Lond; +use Socket; use IO::Socket; use IO::File; #use Apache::File; use POSIX; use Crypt::IDEA; -use LWP::UserAgent(); +use HTTP::Request; use Digest::MD5 qw(md5_hex); use GDBM_File; use Authen::Krb5; @@ -55,13 +55,17 @@ use LONCAPA::lonssl; use Fcntl qw(:flock); use Apache::lonnet; use Mail::Send; +use Crypt::Eksblowfish::Bcrypt; +use Digest::SHA; +use Encode; +use LONCAPA::LWPReq; my $DEBUG = 0; # Non zero to enable debug log entries. my $status=''; my $lastlog=''; -my $VERSION='$Revision: 1.498 $'; #' stupid emacs +my $VERSION='$Revision: 1.532 $'; #' stupid emacs my $remoteVERSION; my $currenthostid="default"; my $currentdomainid; @@ -71,8 +75,16 @@ my $clientip; # IP address of client. my $clientname; # LonCAPA name of client. my $clientversion; # LonCAPA version running on client. my $clienthomedom; # LonCAPA domain of homeID for client. - # primary library server. - +my $clientintdom; # LonCAPA "internet domain" for client. +my $clientsamedom; # LonCAPA domain same for this host + # and client. +my $clientsameinst; # LonCAPA "internet domain" same for + # this host and client. +my $clientremoteok; # Client allowed to host domain's users. + # (version constraints ignored), not set + # if this host and client share "internet domain". +my %clientprohibited; # Actions prohibited on client; + my $server; my $keymode; @@ -93,6 +105,9 @@ my %managers; # Ip -> manager names my %perlvar; # Will have the apache conf defined perl vars. +my %secureconf; # Will have requirements for security + # of lond connections + my $dist; # @@ -130,37 +145,157 @@ my @passwderrors = ("ok", "pwchange_failure - lcpasswd Error filename is invalid"); -# The array below are lcuseradd error strings.: - -my $lastadderror = 13; -my @adderrors = ("ok", - "User ID mismatch, lcuseradd must run as user www", - "lcuseradd Incorrect number of command line parameters must be 3", - "lcuseradd Incorrect number of stdinput lines, must be 3", - "lcuseradd Too many other simultaneous pwd changes in progress", - "lcuseradd User does not exist", - "lcuseradd Unable to make www member of users's group", - "lcuseradd Unable to su to root", - "lcuseradd Unable to set password", - "lcuseradd Username has invalid characters", - "lcuseradd Password has an invalid character", - "lcuseradd User already exists", - "lcuseradd Could not add user.", - "lcuseradd Password mismatch"); - - # This array are the errors from lcinstallfile: my @installerrors = ("ok", "Initial user id of client not that of www", "Usage error, not enough command line arguments", - "Source file name does not exist", - "Destination file name does not exist", + "Source filename does not exist", + "Destination filename does not exist", "Some file operation failed", "Invalid table filename." ); # +# The %trust hash classifies commands according to type of trust +# required for execution of the command. +# +# When clients from a different institution request execution of a +# particular command, the trust settings for that institution set +# for this domain (or default domain for a multi-domain server) will +# be checked to see if running the command is allowed. +# +# Trust types which depend on the "Trust" domain configuration +# for the machine's default domain are: +# +# content ("Access to this domain's content by others") +# shared ("Access to other domain's content by this domain") +# enroll ("Enrollment in this domain's courses by others") +# coaurem ("Co-author roles for this domain's users elsewhere") +# domroles ("Domain roles in this domain assignable to others") +# catalog ("Course Catalog for this domain displayed elsewhere") +# reqcrs ("Requests for creation of courses in this domain by others") +# msg ("Users in other domains can send messages to this domain") +# +# Trust type which depends on the User Session Hosting (remote) +# domain configuration for machine's default domain is: "remote". +# +# Trust types which depend on contents of manager.tab in +# /home/httpd/lonTabs is: "manageronly". +# +# Trust type which requires client to share the same LON-CAPA +# "internet domain" (i.e., same institution as this server) is: +# "institutiononly". +# + +my %trust = ( + auth => {remote => 1}, + autocreatepassword => {remote => 1}, + autocrsreqchecks => {remote => 1, reqcrs => 1}, + autocrsrequpdate => {remote => 1}, + autocrsreqvalidation => {remote => 1}, + autogetsections => {remote => 1}, + autoinstcodedefaults => {remote => 1, catalog => 1}, + autoinstcodeformat => {remote => 1, catalog => 1}, + autonewcourse => {remote => 1, reqcrs => 1}, + autophotocheck => {remote => 1, enroll => 1}, + autophotochoice => {remote => 1}, + autophotopermission => {remote => 1, enroll => 1}, + autopossibleinstcodes => {remote => 1, reqcrs => 1}, + autoretrieve => {remote => 1, enroll => 1, catalog => 1}, + autorun => {remote => 1, enroll => 1, reqcrs => 1}, + autovalidateclass_sec => {catalog => 1}, + autovalidatecourse => {remote => 1, enroll => 1}, + autovalidateinstcode => {domroles => 1, remote => 1, enroll => 1}, + changeuserauth => {remote => 1, domroles => 1}, + chatretr => {remote => 1, enroll => 1}, + chatsend => {remote => 1, enroll => 1}, + courseiddump => {remote => 1, domroles => 1, enroll => 1}, + courseidput => {remote => 1, domroles => 1, enroll => 1}, + courseidputhash => {remote => 1, domroles => 1, enroll => 1}, + courselastaccess => {remote => 1, domroles => 1, enroll => 1}, + currentauth => {remote => 1, domroles => 1, enroll => 1}, + currentdump => {remote => 1, enroll => 1}, + currentversion => {remote=> 1, content => 1}, + dcmaildump => {remote => 1, domroles => 1}, + dcmailput => {remote => 1, domroles => 1}, + del => {remote => 1, domroles => 1, enroll => 1, content => 1}, + deldom => {remote => 1, domroles => 1}, # not currently used + devalidatecache => {institutiononly => 1}, + domroleput => {remote => 1, enroll => 1}, + domrolesdump => {remote => 1, catalog => 1}, + du => {remote => 1, enroll => 1}, + du2 => {remote => 1, enroll => 1}, + dump => {remote => 1, enroll => 1, domroles => 1}, + edit => {institutiononly => 1}, #not used currently + eget => {remote => 1, domroles => 1, enroll => 1}, #not used currently + ekey => {}, #not used currently + exit => {anywhere => 1}, + fetchuserfile => {remote => 1, enroll => 1}, + get => {remote => 1, domroles => 1, enroll => 1}, + getdom => {anywhere => 1}, + home => {anywhere => 1}, + iddel => {remote => 1, enroll => 1}, + idget => {remote => 1, enroll => 1}, + idput => {remote => 1, domroles => 1, enroll => 1}, + inc => {remote => 1, enroll => 1}, + init => {anywhere => 1}, + inst_usertypes => {remote => 1, domroles => 1, enroll => 1}, + instemailrules => {remote => 1, domroles => 1}, + instidrulecheck => {remote => 1, domroles => 1,}, + instidrules => {remote => 1, domroles => 1,}, + instrulecheck => {remote => 1, enroll => 1, reqcrs => 1, domroles => 1}, + instselfcreatecheck => {institutiononly => 1}, + instuserrules => {remote => 1, enroll => 1, reqcrs => 1, domroles => 1}, + keys => {remote => 1,}, + load => {anywhere => 1}, + log => {anywhere => 1}, + ls => {remote => 1, enroll => 1, content => 1,}, + ls2 => {remote => 1, enroll => 1, content => 1,}, + ls3 => {remote => 1, enroll => 1, content => 1,}, + makeuser => {remote => 1, enroll => 1, domroles => 1,}, + mkdiruserfile => {remote => 1, enroll => 1,}, + newput => {remote => 1, enroll => 1, reqcrs => 1, domroles => 1,}, + passwd => {remote => 1}, + ping => {anywhere => 1}, + pong => {anywhere => 1}, + pushfile => {manageronly => 1}, + put => {remote => 1, enroll => 1, domroles => 1, msg => 1, content => 1, shared => 1}, + putdom => {remote => 1, domroles => 1,}, + putstore => {remote => 1, enroll => 1}, + queryreply => {anywhere => 1}, + querysend => {anywhere => 1}, + quit => {anywhere => 1}, + readlonnetglobal => {institutiononly => 1}, + reinit => {manageronly => 1}, #not used currently + removeuserfile => {remote => 1, enroll => 1}, + renameuserfile => {remote => 1,}, + restore => {remote => 1, enroll => 1, reqcrs => 1,}, + rolesdel => {remote => 1, enroll => 1, domroles => 1, coaurem => 1}, + rolesput => {remote => 1, enroll => 1, domroles => 1, coaurem => 1}, + servercerts => {institutiononly => 1}, + serverdistarch => {anywhere => 1}, + serverhomeID => {anywhere => 1}, + serverloncaparev => {anywhere => 1}, + servertimezone => {remote => 1, enroll => 1}, + setannounce => {remote => 1, domroles => 1}, + sethost => {anywhere => 1}, + store => {remote => 1, enroll => 1, reqcrs => 1,}, + studentphoto => {remote => 1, enroll => 1}, + sub => {content => 1,}, + tmpdel => {anywhere => 1}, + tmpget => {anywhere => 1}, + tmpput => {anywhere => 1}, + tokenauthuserfile => {anywhere => 1}, + unsub => {content => 1,}, + update => {shared => 1}, + updateclickers => {remote => 1}, + userhassession => {anywhere => 1}, + userload => {anywhere => 1}, + version => {anywhere => 1}, #not used + ); + +# # Statistics that are maintained and dislayed in the status line. # my $Transactions = 0; # Number of attempted transactions. @@ -316,8 +451,23 @@ sub InsecureConnection { my $Socket = shift; # Don't even start if insecure connections are not allowed. - - if(! $perlvar{londAllowInsecure}) { # Insecure connections not allowed. + # return 0 if Insecure connections not allowed. + # + if (ref($secureconf{'connfrom'}) eq 'HASH') { + if ($clientsamedom) { + if ($secureconf{'connfrom'}{'dom'} eq 'req') { + return 0; + } + } elsif ($clientsameinst) { + if ($secureconf{'connfrom'}{'intdom'} eq 'req') { + return 0; + } + } else { + if ($secureconf{'connfrom'}{'other'} eq 'req') { + return 0; + } + } + } elsif (!$perlvar{londAllowInsecure}) { return 0; } @@ -640,7 +790,7 @@ sub ConfigFileFromSelector { # String to send to client ("ok" or "refused" if bad file). # sub PushFile { - my $request = shift; + my $request = shift; my ($command, $filename, $contents) = split(":", $request, 3); &Debug("PushFile"); @@ -670,6 +820,42 @@ sub PushFile { if($filename eq "host") { $contents = AdjustHostContents($contents); + } elsif ($filename eq 'dns_host' || $filename eq 'dns_domain') { + if ($contents eq '') { + &logthis(' Pushfile: unable to install ' + .$tablefile." - no data received from push. "); + return 'error: push had no data'; + } + if (&Apache::lonnet::get_host_ip($clientname)) { + my $clienthost = &Apache::lonnet::hostname($clientname); + if ($managers{$clientip} eq $clientname) { + my $clientprotocol = $Apache::lonnet::protocol{$clientname}; + $clientprotocol = 'http' if ($clientprotocol ne 'https'); + my $url = '/adm/'.$filename; + $url =~ s{_}{/}; + my $request=new HTTP::Request('GET',"$clientprotocol://$clienthost$url"); + my $response = LONCAPA::LWPReq::makerequest($clientname,$request,'',\%perlvar,60,0); + if ($response->is_error()) { + &logthis(' Pushfile: unable to install ' + .$tablefile." - error attempting to pull data. "); + return 'error: pull failed'; + } else { + my $result = $response->content; + chomp($result); + unless ($result eq $contents) { + &logthis(' Pushfile: unable to install ' + .$tablefile." - pushed data and pulled data differ. "); + my $pushleng = length($contents); + my $pullleng = length($result); + if ($pushleng != $pullleng) { + return "error: $pushleng vs $pullleng bytes"; + } else { + return "error: mismatch push and pull"; + } + } + } + } + } } # Install the new file: @@ -1403,6 +1589,20 @@ sub du2_handler { # selected directory the filename followed by the full output of # the stat function is returned. The returned info for each # file are separated by ':'. The stat fields are separated by &'s. +# +# If the requested path contains /../ or is: +# +# 1. for a directory, and the path does not begin with one of: +# (a) /home/httpd/html/res/ +# (b) /home/httpd/html/res/userfiles/ +# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles +# or is: +# +# 2. for a file, and the path (after prepending) does not begin with: +# /home/httpd/lonUsers//<1>/<2>/<3>// +# +# the response will be "refused". +# # Parameters: # $cmd - The command that dispatched us (ls). # $ulsdir - The directory path to list... I'm not sure what this @@ -1424,8 +1624,17 @@ sub ls_handler { my $rights; my $ulsout=''; my $ulsfn; + if ($ulsdir =~m{/\.\./}) { + &Failure($client,"refused\n",$userinput); + return 1; + } if (-e $ulsdir) { if(-d $ulsdir) { + unless (($ulsdir =~ m{/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) || + ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/userfiles/})) { + &Failure($client,"refused\n",$userinput); + return 1; + } if (opendir(LSDIR,$ulsdir)) { while ($ulsfn=readdir(LSDIR)) { undef($obs); @@ -1449,6 +1658,10 @@ sub ls_handler { closedir(LSDIR); } } else { + unless ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/}) { + &Failure($client,"refused\n",$userinput); + return 1; + } my @ulsstats=stat($ulsdir); $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; } @@ -1473,6 +1686,20 @@ sub ls_handler { # selected directory the filename followed by the full output of # the stat function is returned. The returned info for each # file are separated by ':'. The stat fields are separated by &'s. +# +# If the requested path contains /../ or is: +# +# 1. for a directory, and the path does not begin with one of: +# (a) /home/httpd/html/res/ +# (b) /home/httpd/html/res/userfiles/ +# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles +# or is: +# +# 2. for a file, and the path (after prepending) does not begin with: +# /home/httpd/lonUsers//<1>/<2>/<3>// +# +# the response will be "refused". +# # Parameters: # $cmd - The command that dispatched us (ls). # $ulsdir - The directory path to list... I'm not sure what this @@ -1493,8 +1720,17 @@ sub ls2_handler { my $rights; my $ulsout=''; my $ulsfn; + if ($ulsdir =~m{/\.\./}) { + &Failure($client,"refused\n",$userinput); + return 1; + } if (-e $ulsdir) { if(-d $ulsdir) { + unless (($ulsdir =~ m{/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) || + ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/userfiles/})) { + &Failure($client,"refused\n","$userinput"); + return 1; + } if (opendir(LSDIR,$ulsdir)) { while ($ulsfn=readdir(LSDIR)) { undef($obs); @@ -1519,6 +1755,10 @@ sub ls2_handler { closedir(LSDIR); } } else { + unless ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/}) { + &Failure($client,"refused\n",$userinput); + return 1; + } my @ulsstats=stat($ulsdir); $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; } @@ -1535,6 +1775,22 @@ sub ls2_handler { # selected directory the filename followed by the full output of # the stat function is returned. The returned info for each # file are separated by ':'. The stat fields are separated by &'s. +# +# If the requested path (after prepending) contains /../ or is: +# +# 1. for a directory, and the path does not begin with one of: +# (a) /home/httpd/html/res/ +# (b) /home/httpd/html/res/userfiles/ +# (c) /home/httpd/lonUsers//<1>/<2>/<3>//userfiles +# (d) /home/httpd/html/priv// and client is the homeserver +# +# or is: +# +# 2. for a file, and the path (after prepending) does not begin with: +# /home/httpd/lonUsers//<1>/<2>/<3>// +# +# the response will be "refused". +# # Parameters: # $cmd - The command that dispatched us (ls). # $tail - The tail of the request that invoked us. @@ -1574,22 +1830,12 @@ sub ls3_handler { } my $dir_root = $perlvar{'lonDocRoot'}; - if ($getpropath) { + if (($getpropath) || ($getuserdir)) { if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) { $dir_root = &propath($udom,$uname); $dir_root =~ s/\/$//; } else { - &Failure($client,"refused\n","$cmd:$tail"); - return 1; - } - } elsif ($getuserdir) { - if (($uname =~ /^$LONCAPA::match_name$/) && ($udom =~ /^$LONCAPA::match_domain$/)) { - my $subdir=$uname.'__'; - $subdir =~ s/(.)(.)(.).*/$1\/$2\/$3/; - $dir_root = $Apache::lonnet::perlvar{'lonUsersDir'} - ."/$udom/$subdir/$uname"; - } else { - &Failure($client,"refused\n","$cmd:$tail"); + &Failure($client,"refused\n",$userinput); return 1; } } elsif ($alternate_root ne '') { @@ -1602,12 +1848,28 @@ sub ls3_handler { $ulsdir = $dir_root.'/'.$ulsdir; } } + if ($ulsdir =~m{/\.\./}) { + &Failure($client,"refused\n",$userinput); + return 1; + } + my $islocal; + my @machine_ids = &Apache::lonnet::current_machine_ids(); + if (grep(/^\Q$clientname\E$/,@machine_ids)) { + $islocal = 1; + } my $obs; my $rights; my $ulsout=''; my $ulsfn; if (-e $ulsdir) { if(-d $ulsdir) { + unless (($getpropath) || ($getuserdir) || + ($ulsdir =~ m{/home/httpd/html/(res/$LONCAPA::match_domain|userfiles/)}) || + ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/userfiles/}) || + (($ulsdir =~ m{/home/httpd/html/priv/$LONCAPA::match_domain/}) && ($islocal))) { + &Failure($client,"refused\n",$userinput); + return 1; + } if (opendir(LSDIR,$ulsdir)) { while ($ulsfn=readdir(LSDIR)) { undef($obs); @@ -1632,6 +1894,11 @@ sub ls3_handler { closedir(LSDIR); } } else { + unless (($getpropath) || ($getuserdir) || + ($ulsdir =~ m{/home/httpd/lonUsers/$LONCAPA::match_domain(?:/[\w\-.@]){3}/$LONCAPA::match_username/})) { + &Failure($client,"refused\n",$userinput); + return 1; + } my @ulsstats=stat($ulsdir); $ulsout.=$ulsfn.'&'.join('&',@ulsstats).':'; } @@ -1655,15 +1922,17 @@ sub read_lonnet_global { ); my %limit_to = ( perlvar => { - lonOtherAuthen => 1, - lonBalancer => 1, - lonVersion => 1, - lonSysEMail => 1, - lonHostID => 1, - lonRole => 1, - lonDefDomain => 1, - lonLoadLim => 1, - lonUserLoadLim => 1, + lonOtherAuthen => 1, + lonBalancer => 1, + lonVersion => 1, + lonAdmEMail => 1, + lonSupportEMail => 1, + lonSysEMail => 1, + lonHostID => 1, + lonRole => 1, + lonDefDomain => 1, + lonLoadLim => 1, + lonUserLoadLim => 1, } ); if (ref($requested) eq 'HASH') { @@ -1704,8 +1973,14 @@ sub read_lonnet_global { sub server_devalidatecache_handler { my ($cmd,$tail,$client) = @_; my $userinput = "$cmd:$tail"; - my ($name,$id) = map { &unescape($_); } split(/:/,$tail); - &Apache::lonnet::devalidate_cache_new($name,$id); + my $items = &unescape($tail); + my @cached = split(/\&/,$items); + foreach my $key (@cached) { + if ($key =~ /:/) { + my ($name,$id) = map { &unescape($_); } split(/:/,$key); + &Apache::lonnet::devalidate_cache_new($name,$id); + } + } my $result = 'ok'; &Reply($client,\$result,$userinput); return 1; @@ -1769,6 +2044,16 @@ sub server_distarch_handler { } ®ister_handler("serverdistarch", \&server_distarch_handler, 0, 1, 0); +sub server_certs_handler { + my ($cmd,$tail,$client) = @_; + my $userinput = "$cmd:$tail"; + my $result; + my $result = &LONCAPA::Lond::server_certs(\%perlvar); + &Reply($client,\$result,$userinput); + return; +} +®ister_handler("servercerts", \&server_certs_handler, 0, 1, 0); + # Process a reinit request. Reinit requests that either # lonc or lond be reinitialized so that an updated # host.tab or domain.tab can be processed. @@ -1901,7 +2186,7 @@ sub authenticate_handler { my ($remote,$hosted); my $remotesession = &get_usersession_config($udom,'remotesession'); if (ref($remotesession) eq 'HASH') { - $remote = $remotesession->{'remote'} + $remote = $remotesession->{'remote'}; } my $hostedsession = &get_usersession_config($clienthomedom,'hostedsession'); if (ref($hostedsession) eq 'HASH') { @@ -1988,15 +2273,14 @@ sub change_password_handler { my ($howpwd,$contentpwd)=split(/:/,$realpasswd); if ($howpwd eq 'internal') { &Debug("internal auth"); - my $salt=time; - $salt=substr($salt,6,2); - my $ncpass=crypt($npass,$salt); + my $ncpass = &hash_passwd($udom,$npass); if(&rewrite_password_file($udom, $uname, "internal:$ncpass")) { my $msg="Result of password change for $uname: pwchange_success"; if ($lonhost) { $msg .= " - request originated from: $lonhost"; } &logthis($msg); + &update_passwd_history($uname,$udom,$howpwd,$context); &Reply($client, "ok\n", $userinput); } else { &logthis("Unable to open $uname passwd " @@ -2005,6 +2289,9 @@ sub change_password_handler { } } elsif ($howpwd eq 'unix' && $context ne 'reset_by_email') { my $result = &change_unix_password($uname, $npass); + if ($result eq 'ok') { + &update_passwd_history($uname,$udom,$howpwd,$context); + } &logthis("Result of password change for $uname: ". $result); &Reply($client, \$result, $userinput); @@ -2027,6 +2314,42 @@ sub change_password_handler { } ®ister_handler("passwd", \&change_password_handler, 1, 1, 0); +sub hash_passwd { + my ($domain,$plainpass,@rest) = @_; + my ($salt,$cost); + if (@rest) { + $cost = $rest[0]; + # salt is first 22 characters, base-64 encoded by bcrypt + my $plainsalt = substr($rest[1],0,22); + $salt = Crypt::Eksblowfish::Bcrypt::de_base64($plainsalt); + } else { + my $defaultcost; + my %domconfig = + &Apache::lonnet::get_dom('configuration',['password'],$domain); + if (ref($domconfig{'password'}) eq 'HASH') { + $defaultcost = $domconfig{'password'}{'cost'}; + } + if (($defaultcost eq '') || ($defaultcost =~ /D/)) { + $cost = 10; + } else { + $cost = $defaultcost; + } + # Generate random 16-octet base64 salt + $salt = ""; + $salt .= pack("C", int rand(256)) for 1..16; + } + my $hash = &Crypt::Eksblowfish::Bcrypt::bcrypt_hash({ + key_nul => 1, + cost => $cost, + salt => $salt, + }, Digest::SHA::sha512(Encode::encode('UTF-8',$plainpass))); + + my $result = join("!", "", "bcrypt", sprintf("%02d",$cost), + &Crypt::Eksblowfish::Bcrypt::en_base64($salt). + &Crypt::Eksblowfish::Bcrypt::en_base64($hash)); + return $result; +} + # # Create a new user. User in this case means a lon-capa user. # The user must either already exist in some authentication realm @@ -2070,7 +2393,8 @@ sub add_user_handler { ."makeuser"; } unless ($fperror) { - my $result=&make_passwd_file($uname,$udom,$umode,$npass, $passfilename); + my $result=&make_passwd_file($uname,$udom,$umode,$npass, + $passfilename,'makeuser'); &Reply($client,\$result, $userinput); #BUGBUG - could be fail } else { &Failure($client, \$fperror, $userinput); @@ -2131,36 +2455,30 @@ sub change_authentication_handler { my $passfilename = &password_path($udom, $uname); if ($passfilename) { # Not allowed to create a new user!! # If just changing the unix passwd. need to arrange to run - # passwd since otherwise make_passwd_file will run - # lcuseradd which fails if an account already exists - # (to prevent an unscrupulous LONCAPA admin from stealing - # an existing account by overwriting it as a LonCAPA account). + # passwd since otherwise make_passwd_file will fail as + # creation of unix authenticated users is no longer supported + # except from the command line, when running make_domain_coordinator.pl if(($oldauth =~/^unix/) && ($umode eq "unix")) { my $result = &change_unix_password($uname, $npass); &logthis("Result of password change for $uname: ".$result); if ($result eq "ok") { + &update_passwd_history($uname,$udom,$umode,'changeuserauth'); &Reply($client, \$result); } else { &Failure($client, \$result); } } else { - my $result=&make_passwd_file($uname,$udom,$umode,$npass,$passfilename); + my $result=&make_passwd_file($uname,$udom,$umode,$npass, + $passfilename,'changeuserauth'); # # If the current auth mode is internal, and the old auth mode was # unix, or krb*, and the user is an author for this domain, # re-run manage_permissions for that role in order to be able # to take ownership of the construction space back to www:www # - - - if( (($oldauth =~ /^unix/) && ($umode eq "internal")) || - (($oldauth =~ /^internal/) && ($umode eq "unix")) ) { - if(&is_author($udom, $uname)) { - &Debug(" Need to manage author permissions..."); - &manage_permissions("/$udom/_au", $udom, $uname, "$umode:"); - } - } + + &Reply($client, \$result, $userinput); } @@ -2173,6 +2491,17 @@ sub change_authentication_handler { } ®ister_handler("changeuserauth", \&change_authentication_handler, 1,1, 0); +sub update_passwd_history { + my ($uname,$udom,$umode,$context) = @_; + my $proname=&propath($udom,$uname); + my $now = time; + if (open(my $fh,">>$proname/passwd.log")) { + print $fh "$now:$umode:$context\n"; + close($fh); + } + return; +} + # # Determines if this is the home server for a user. The home server # for a user will have his/her lon-capa passwd file. Therefore all we need @@ -2259,9 +2588,8 @@ sub update_resource_handler { # FIXME: this should use the LWP mechanism, not internal alarms. alarm(1200); { - my $ua=new LWP::UserAgent; my $request=new HTTP::Request('GET',"$remoteurl"); - $response=$ua->request($request,$transname); + $response=&LONCAPA::LWPReq::makerequest($clientname,$request,$transname,\%perlvar,1200,0,1); } alarm(0); if ($response->is_error()) { @@ -2274,9 +2602,8 @@ sub update_resource_handler { # FIXME: isn't there an internal LWP mechanism for this? alarm(120); { - my $ua=new LWP::UserAgent; my $mrequest=new HTTP::Request('GET',$remoteurl.'.meta'); - my $mresponse=$ua->request($mrequest,$fname.'.meta'); + my $mresponse = &LONCAPA::LWPReq::makerequest($clientname,$mrequest,$fname.'.meta',\%perlvar,120,0,1); if ($mresponse->is_error()) { unlink($fname.'.meta'); } @@ -2351,11 +2678,15 @@ sub fetch_user_file_handler { my $remoteurl=$clientprotocol.'://'.$clienthost.'/userfiles/'.$fname; my $response; Debug("Remote URL : $remoteurl Transfername $transname Destname: $destname"); - alarm(120); + alarm(1200); { - my $ua=new LWP::UserAgent; my $request=new HTTP::Request('GET',"$remoteurl"); - $response=$ua->request($request,$transname); + my $verifycert = 1; + my @machine_ids = &Apache::lonnet::current_machine_ids(); + if (grep(/^\Q$clientname\E$/,@machine_ids)) { + $verifycert = 0; + } + $response = &LONCAPA::LWPReq::makerequest($clientname,$request,$transname,\%perlvar,1200,$verifycert); } alarm(0); if ($response->is_error()) { @@ -2424,11 +2755,20 @@ sub remove_user_file_handler { if (-e $file) { # # If the file is a regular file unlink is fine... - # However it's possible the client wants a dir. - # removed, in which case rmdir is more approprate: + # However it's possible the client wants a dir + # removed, in which case rmdir is more appropriate. + # Note: rmdir will only remove an empty directory. # if (-f $file){ unlink($file); + # for html files remove the associated .bak file + # which may have been created by the editor. + if ($ufile =~ m{^((docs|supplemental)/(?:\d+|default)/\d+(?:|/.+)/)[^/]+\.x?html?$}i) { + my $path = $1; + if (-e $file.'.bak') { + unlink($file.'.bak'); + } + } } elsif(-d $file) { rmdir($file); } @@ -2791,8 +3131,12 @@ sub newput_user_profile_entry { foreach my $pair (@pairs) { my ($key,$value)=split(/=/,$pair); if (exists($hashref->{$key})) { - &Failure($client, "key_exists: ".$key."\n",$userinput); - return 1; + if (!&untie_user_hash($hashref)) { + &logthis("error: ".($!+0)." untie (GDBM) failed ". + "while attempting newput - early out as key exists"); + } + &Failure($client, "key_exists: ".$key."\n",$userinput); + return 1; } } @@ -3305,6 +3649,9 @@ sub dump_with_regexp { # namespace - Name of the database being modified # rid - Resource keyword to modify. # what - new value associated with rid. +# laststore - (optional) version=timestamp +# for most recent transaction for rid +# in namespace, when cstore was called # # $client - Socket open on the client. # @@ -3313,23 +3660,45 @@ sub dump_with_regexp { # 1 (keep on processing). # Side-Effects: # Writes to the client +# Successful storage will cause either 'ok', or, if $laststore was included +# in the tail of the request, and the version number for the last transaction +# is larger than the version in $laststore, delay:$numtrans , where $numtrans +# is the number of store evevnts recorded for rid in namespace since +# lonnet::store() was called by the client. +# sub store_handler { my ($cmd, $tail, $client) = @_; my $userinput = "$cmd:$tail"; - - my ($udom,$uname,$namespace,$rid,$what) =split(/:/,$tail); + chomp($tail); + my ($udom,$uname,$namespace,$rid,$what,$laststore) =split(/:/,$tail); if ($namespace ne 'roles') { - chomp($what); my @pairs=split(/\&/,$what); my $hashref = &tie_user_hash($udom, $uname, $namespace, &GDBM_WRCREAT(), "S", "$rid:$what"); if ($hashref) { my $now = time; - my @previouskeys=split(/&/,$hashref->{"keys:$rid"}); - my $key; + my $numtrans; + if ($laststore) { + my ($previousversion,$previoustime) = split(/\=/,$laststore); + my ($lastversion,$lasttime) = (0,0); + $lastversion = $hashref->{"version:$rid"}; + if ($lastversion) { + $lasttime = $hashref->{"$lastversion:$rid:timestamp"}; + } + if (($previousversion) && ($previousversion !~ /\D/)) { + if (($lastversion > $previousversion) && ($lasttime >= $previoustime)) { + $numtrans = $lastversion - $previousversion; + } + } elsif ($lastversion) { + $numtrans = $lastversion; + } + if ($numtrans) { + $numtrans =~ s/D//g; + } + } $hashref->{"version:$rid"}++; my $version=$hashref->{"version:$rid"}; my $allkeys=''; @@ -3342,7 +3711,11 @@ sub store_handler { $allkeys.='timestamp'; $hashref->{"$version:keys:$rid"}=$allkeys; if (&untie_user_hash($hashref)) { - &Reply($client, "ok\n", $userinput); + my $msg = 'ok'; + if ($numtrans) { + $msg = 'delay:'.$numtrans; + } + &Reply($client, "$msg\n", $userinput); } else { &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". "while attempting store\n", $userinput); @@ -3858,7 +4231,9 @@ sub put_course_id_hash_handler { # creationcontext - include courses created in specified context # # domcloner - flag to indicate if user can create CCs in course's domain. -# If so, ability to clone course is automatic. +# If so, ability to clone course is automatic. +# hasuniquecode - filter by courses for which a six character unique code has +# been set. # # $client - The socket open on the client. # Returns: @@ -3883,7 +4258,7 @@ sub dump_course_id_handler { my ($udom,$since,$description,$instcodefilter,$ownerfilter,$coursefilter, $typefilter,$regexp_ok,$rtn_as_hash,$selfenrollonly,$catfilter,$showhidden, $caller,$cloner,$cc_clone_list,$cloneonly,$createdbefore,$createdafter, - $creationcontext,$domcloner) =split(/:/,$tail); + $creationcontext,$domcloner,$hasuniquecode) =split(/:/,$tail); my $now = time; my ($cloneruname,$clonerudom,%cc_clone); if (defined($description)) { @@ -3956,6 +4331,9 @@ sub dump_course_id_handler { } else { $creationcontext = '.'; } + unless ($hasuniquecode) { + $hasuniquecode = '.'; + } my $unpack = 1; if ($description eq '.' && $instcodefilter eq '.' && $ownerfilter eq '.' && $typefilter eq '.') { @@ -4044,6 +4422,9 @@ sub dump_course_id_handler { $selfenroll_end = $items->{'selfenroll_end_date'}; $created = $items->{'created'}; $context = $items->{'context'}; + if ($hasuniquecode ne '.') { + next unless ($items->{'uniquecode'}); + } if ($selfenrollonly) { next if (!$selfenroll_types); if (($selfenroll_end > 0) && ($selfenroll_end <= $now)) { @@ -4319,6 +4700,122 @@ sub put_domain_handler { } ®ister_handler("putdom", \&put_domain_handler, 0, 1, 0); +# Updates one or more entries in clickers.db file at the domain level +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# In this case a colon separated list containing: +# (a) the domain for which we are updating the entries, +# (b) the action required -- add or del -- and +# (c) a &-separated list of entries to add or delete. +# $client - File descriptor connected to client. +# Returns +# 1 - Continue processing. +# 0 - Requested to exit, caller should shut down. +# Side effects: +# reply is written to $client. +# + + +sub update_clickers { + my ($cmd, $tail, $client) = @_; + + my $userinput = "$cmd:$tail"; + my ($udom,$action,$what) =split(/:/,$tail,3); + chomp($what); + + my $hashref = &tie_domain_hash($udom, "clickers", &GDBM_WRCREAT(), + "U","$action:$what"); + + if (!$hashref) { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting updateclickers\n", $userinput); + return 1; + } + + my @pairs=split(/\&/,$what); + foreach my $pair (@pairs) { + my ($key,$value)=split(/=/,$pair); + if ($action eq 'add') { + if (exists($hashref->{$key})) { + my @newvals = split(/,/,&unescape($value)); + my @currvals = split(/,/,&unescape($hashref->{$key})); + my @merged = sort(keys(%{{map { $_ => 1 } (@newvals,@currvals)}})); + $hashref->{$key}=&escape(join(',',@merged)); + } else { + $hashref->{$key}=$value; + } + } elsif ($action eq 'del') { + if (exists($hashref->{$key})) { + my %current; + map { $current{$_} = 1; } split(/,/,&unescape($hashref->{$key})); + map { delete($current{$_}); } split(/,/,&unescape($value)); + if (keys(%current)) { + $hashref->{$key}=&escape(join(',',sort(keys(%current)))); + } else { + delete($hashref->{$key}); + } + } + } + } + if (&untie_user_hash($hashref)) { + &Reply( $client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) failed ". + "while attempting put\n", + $userinput); + } + return 1; +} +®ister_handler("updateclickers", \&update_clickers, 0, 1, 0); + + +# Deletes one or more entries in a namespace db file at the domain level +# +# Parameters: +# $cmd - The command that got us here. +# $tail - Tail of the command (remaining parameters). +# In this case a colon separated list containing: +# (a) the domain for which we are deleting the entries, +# (b) &-separated list of keys to delete. +# $client - File descriptor connected to client. +# Returns +# 1 - Continue processing. +# 0 - Requested to exit, caller should shut down. +# Side effects: +# reply is written to $client. +# + +sub del_domain_handler { + my ($cmd,$tail,$client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($udom,$namespace,$what)=split(/:/,$tail,3); + chomp($what); + my $hashref = &tie_domain_hash($udom,$namespace,&GDBM_WRCREAT(), + "D", $what); + if ($hashref) { + my @keys=split(/\&/,$what); + foreach my $key (@keys) { + delete($hashref->{$key}); + } + if (&untie_user_hash($hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting deldom\n", $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting deldom\n", $userinput); + } + return 1; +} +®ister_handler("deldom", \&del_domain_handler, 0, 1, 0); + + # Unencrypted get from the namespace database file at the domain level. # This function retrieves a keyed item from a specific named database in the # domain directory. @@ -4466,6 +4963,49 @@ sub get_id_handler { } ®ister_handler("idget", \&get_id_handler, 0, 1, 0); +# Deletes one or more ids in a domain's id database. +# +# Parameters: +# $cmd - Command keyword (iddel). +# $tail - Command tail. In this case a colon +# separated list containing: +# The domain for which we are deleting the id(s). +# &-separated list of id(s) to delete. +# $client - File open on client socket. +# Returns: +# 1 - Continue processing +# 0 - Exit server. +# +# + +sub del_id_handler { + my ($cmd,$tail,$client) = @_; + + my $userinput = "$cmd:$tail"; + + my ($udom,$what)=split(/:/,$tail); + chomp($what); + my $hashref = &tie_domain_hash($udom, "ids", &GDBM_WRCREAT(), + "D", $what); + if ($hashref) { + my @keys=split(/\&/,$what); + foreach my $key (@keys) { + delete($hashref->{$key}); + } + if (&untie_user_hash($hashref)) { + &Reply($client, "ok\n", $userinput); + } else { + &Failure($client, "error: ".($!+0)." untie(GDBM) Failed ". + "while attempting iddel\n", $userinput); + } + } else { + &Failure( $client, "error: ".($!+0)." tie(GDBM) Failed ". + "while attempting iddel\n", $userinput); + } + return 1; +} +®ister_handler("iddel", \&del_id_handler, 0, 1, 0); + # # Puts broadcast e-mail sent by Domain Coordinator in nohist_dcmail database # @@ -5181,13 +5721,58 @@ sub create_auto_enroll_password_handler ®ister_handler("autocreatepassword", \&create_auto_enroll_password_handler, 0, 1, 0); +sub auto_export_grades_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($cdom,$cnum,$info,$data) = split(/:/,$tail); + my $inforef = &Apache::lonnet::thaw_unescape($info); + my $dataref = &Apache::lonnet::thaw_unescape($data); + my ($outcome,$result);; + eval { + local($SIG{__DIE__})='DEFAULT'; + my %rtnhash; + $outcome=&localenroll::export_grades($cdom,$cnum,$inforef,$dataref,\%rtnhash); + if ($outcome eq 'ok') { + foreach my $key (keys(%rtnhash)) { + $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&'; + } + $result =~ s/\&$//; + } + }; + if (!$@) { + if ($outcome eq 'ok') { + if ($cipher) { + my $cmdlength=length($result); + $result.=" "; + my $encresult=''; + for (my $encidx=0;$encidx<=$cmdlength;$encidx+=8) { + $encresult.= unpack("H16", + $cipher->encrypt(substr($result, + $encidx, + 8))); + } + &Reply( $client, "enc:$cmdlength:$encresult\n", $userinput); + } else { + &Failure( $client, "error:no_key\n", $userinput); + } + } else { + &Reply($client, "$outcome\n", $userinput); + } + } else { + &Failure($client,"export_error\n",$userinput); + } + return 1; +} +®ister_handler("autoexportgrades", \&auto_export_grades_handler, + 0, 1, 0); + # Retrieve and remove temporary files created by/during autoenrollment. # # Formal Parameters: # $cmd - The command that got us dispatched. # $tail - The tail of the command. In our case this is a colon # separated list that will be split into: -# $filename - The name of the file to remove. +# $filename - The name of the file to retrieve. # The filename is given as a path relative to # the LonCAPA temp file directory. # $client - Socket open on the client. @@ -5201,7 +5786,12 @@ sub retrieve_auto_file_handler { my ($filename) = split(/:/, $tail); my $source = $perlvar{'lonDaemons'}.'/tmp/'.$filename; - if ( (-e $source) && ($filename ne '') ) { + + if ($filename =~m{/\.\./}) { + &Failure($client, "refused\n", $userinput); + } elsif ($filename !~ /^$LONCAPA::match_domain\_$LONCAPA::match_courseid\_.+_classlist\.xml$/) { + &Failure($client, "refused\n", $userinput); + } elsif ( (-e $source) && ($filename ne '') ) { my $reply = ''; if (open(my $fh,$source)) { while (<$fh>) { @@ -5233,7 +5823,7 @@ sub crsreq_checks_handler { my $userinput = "$cmd:$tail"; my $dom = $tail; my $result; - my @reqtypes = ('official','unofficial','community'); + my @reqtypes = ('official','unofficial','community','textbook','placement'); eval { local($SIG{__DIE__})='DEFAULT'; my %validations; @@ -5260,19 +5850,20 @@ sub crsreq_checks_handler { sub validate_crsreq_handler { my ($cmd, $tail, $client) = @_; my $userinput = "$cmd:$tail"; - my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist) = split(/:/, $tail); + my ($dom,$owner,$crstype,$inststatuslist,$instcode,$instseclist,$customdata) = split(/:/, $tail); $instcode = &unescape($instcode); $owner = &unescape($owner); $crstype = &unescape($crstype); $inststatuslist = &unescape($inststatuslist); $instcode = &unescape($instcode); $instseclist = &unescape($instseclist); + my $custominfo = &Apache::lonnet::thaw_unescape($customdata); my $outcome; eval { local($SIG{__DIE__})='DEFAULT'; $outcome = &localenroll::validate_crsreq($dom,$owner,$crstype, $inststatuslist,$instcode, - $instseclist); + $instseclist,$custominfo); }; if (!$@) { &Reply($client, \$outcome, $userinput); @@ -5283,6 +5874,53 @@ sub validate_crsreq_handler { } ®ister_handler("autocrsreqvalidation", \&validate_crsreq_handler, 0, 1, 0); +sub crsreq_update_handler { + my ($cmd, $tail, $client) = @_; + my $userinput = "$cmd:$tail"; + my ($cdom,$cnum,$crstype,$action,$ownername,$ownerdomain,$fullname,$title,$code, + $accessstart,$accessend,$infohashref) = + split(/:/, $tail); + $crstype = &unescape($crstype); + $action = &unescape($action); + $ownername = &unescape($ownername); + $ownerdomain = &unescape($ownerdomain); + $fullname = &unescape($fullname); + $title = &unescape($title); + $code = &unescape($code); + $accessstart = &unescape($accessstart); + $accessend = &unescape($accessend); + my $incoming = &Apache::lonnet::thaw_unescape($infohashref); + my ($result,$outcome); + eval { + local($SIG{__DIE__})='DEFAULT'; + my %rtnhash; + $outcome = &localenroll::crsreq_updates($cdom,$cnum,$crstype,$action, + $ownername,$ownerdomain,$fullname, + $title,$code,$accessstart,$accessend, + $incoming,\%rtnhash); + if ($outcome eq 'ok') { + my @posskeys = qw(createdweb createdmsg createdcustomized createdactions queuedweb queuedmsg formitems reviewweb validationjs onload javascript); + foreach my $key (keys(%rtnhash)) { + if (grep(/^\Q$key\E/,@posskeys)) { + $result .= &escape($key).'='.&Apache::lonnet::freeze_escape($rtnhash{$key}).'&'; + } + } + $result =~ s/\&$//; + } + }; + if (!$@) { + if ($outcome eq 'ok') { + &Reply($client, \$result, $userinput); + } else { + &Reply($client, "format_error\n", $userinput); + } + } else { + &Failure($client,"unknown_cmd\n",$userinput); + } + return 1; +} +®ister_handler("autocrsrequpdate", \&crsreq_update_handler, 0, 1, 0); + # # Read and retrieve institutional code format (for support form). # Formal Parameters: @@ -5790,12 +6428,13 @@ sub get_request { # # Parameters: # user_input - The request received from the client (lonc). +# # Returns: # true to keep processing, false if caller should exit. # sub process_request { - my ($userinput) = @_; # Easier for now to break style than to - # fix all the userinput -> user_input. + my ($userinput) = @_; # Easier for now to break style than to + # fix all the userinput -> user_input. my $wasenc = 0; # True if request was encrypted. # ------------------------------------------------------------ See if encrypted # for command @@ -5875,6 +6514,49 @@ sub process_request { Debug("Client not privileged to do this operation"); $ok = 0; } + if ($ok) { + if (ref($trust{$command}) eq 'HASH') { + my $donechecks; + if ($trust{$command}{'anywhere'}) { + $donechecks = 1; + } elsif ($trust{$command}{'manageronly'}) { + unless (&isManager()) { + $ok = 0; + } + $donechecks = 1; + } elsif ($trust{$command}{'institutiononly'}) { + unless ($clientsameinst) { + $ok = 0; + } + $donechecks = 1; + } elsif ($clientsameinst) { + $donechecks = 1; + } + unless ($donechecks) { + foreach my $rule (keys(%{$trust{$command}})) { + next if ($rule eq 'remote'); + if ($trust{$command}{$rule}) { + if ($clientprohibited{$rule}) { + $ok = 0; + } else { + $ok = 1; + $donechecks = 1; + last; + } + } + } + } + unless ($donechecks) { + if ($trust{$command}{'remote'}) { + if ($clientremoteok) { + $ok = 1; + } else { + $ok = 0; + } + } + } + } + } if($ok) { Debug("Dispatching to handler $command $tail"); @@ -5885,8 +6567,7 @@ sub process_request { Failure($client, "refused\n", $userinput); return 1; } - - } + } print $client "unknown_cmd\n"; # -------------------------------------------------------------------- complete @@ -5990,18 +6671,6 @@ sub lcpasswdstrerror { } } -# -# Convert an error return code from lcuseradd to a string value: -# -sub lcuseraddstrerror { - my $ErrorCode = shift; - if(($ErrorCode < 0) || ($ErrorCode > $lastadderror)) { - return "lcuseradd - Unrecognized error code: ".$ErrorCode; - } else { - return $adderrors[$ErrorCode]; - } -} - # grabs exception and records it to log before exiting sub catchexception { my ($error)=@_; @@ -6155,6 +6824,7 @@ sub UpdateHosts { # will take care of new and changed hosts as connections come into being. &Apache::lonnet::reset_hosts_info(); + my %active; foreach my $child (keys(%children)) { my $childip = $children{$child}; @@ -6164,15 +6834,62 @@ sub UpdateHosts { ." $child for ip $childip "); kill('INT', $child); } else { + $active{$child} = $childip; logthis(' keeping child for ip ' ." $childip (pid=$child) "); } } + + my %oldconf = %secureconf; + my %connchange; + if (lonssl::Read_Connect_Config(\%secureconf,\%perlvar) eq 'ok') { + logthis(' Reloaded SSL connection rules '); + } else { + logthis(' Failed to reload SSL connection rules '); + } + if ((ref($oldconf{'connfrom'}) eq 'HASH') && (ref($secureconf{'connfrom'}) eq 'HASH')) { + foreach my $type ('dom','intdom','other') { + if ((($oldconf{'connfrom'}{$type} eq 'no') && ($secureconf{'connfrom'}{$type} eq 'req')) || + (($oldconf{'connfrom'}{$type} eq 'req') && ($secureconf{'connfrom'}{$type} eq 'no'))) { + $connchange{$type} = 1; + } + } + } + if (keys(%connchange)) { + foreach my $child (keys(%active)) { + my $childip = $active{$child}; + if ($childip ne '127.0.0.1') { + my $childhostname = gethostbyaddr(Socket::inet_aton($childip),AF_INET); + if ($childhostname ne '') { + my $childlonhost = &Apache::lonnet::get_server_homeID($childhostname); + my ($samedom,$sameinst) = &set_client_info($childlonhost); + if ($samedom) { + if ($connchange{'dom'}) { + logthis(' UpdateHosts killing child ' + ." $child for ip $childip "); + kill('INT', $child); + } + } elsif ($sameinst) { + if ($connchange{'intdom'}) { + logthis(' UpdateHosts killing child ' + ." $child for ip $childip "); + kill('INT', $child); + } + } else { + if ($connchange{'other'}) { + logthis(' UpdateHosts killing child ' + ." $child for ip $childip "); + kill('INT', $child); + } + } + } + } + } + } ReloadApache; &status("Finished reloading hosts.tab"); } - sub checkchildren { &status("Checking on the children (sending signals)"); &initnewstatus(); @@ -6407,6 +7124,10 @@ if ($arch eq 'unknown') { chomp($arch); } +unless (lonssl::Read_Connect_Config(\%secureconf,\%perlvar) eq 'ok') { + &logthis('No connectionrules table. Will fallback to loncapa.conf'); +} + # -------------------------------------------------------------- # Accept connections. When a connection comes in, it is validated # and if good, a child process is created to process transactions @@ -6490,9 +7211,26 @@ sub make_new_child { # my $tmpsnum=0; # Now global #---------------------------------------------------- kerberos 5 initialization &Authen::Krb5::init_context(); - unless (($dist eq 'fedora5') || ($dist eq 'fedora4') || - ($dist eq 'fedora6') || ($dist eq 'suse9.3') || - ($dist eq 'suse12.2')) { + + my $no_ets; + if ($dist =~ /^(?:centos|rhes|scientific)(\d+)$/) { + if ($1 >= 7) { + $no_ets = 1; + } + } elsif ($dist =~ /^suse(\d+\.\d+)$/) { + if (($1 eq '9.3') || ($1 >= 12.2)) { + $no_ets = 1; + } + } elsif ($dist =~ /^sles(\d+)$/) { + if ($1 > 11) { + $no_ets = 1; + } + } elsif ($dist =~ /^fedora(\d+)$/) { + if ($1 < 7) { + $no_ets = 1; + } + } + unless ($no_ets) { &Authen::Krb5::init_ets(); } @@ -6520,7 +7258,7 @@ sub make_new_child { $ConnectionType = "manager"; $clientname = $managers{$outsideip}; } - my $clientok; + my ($clientok,$clientinfoset); if ($clientrec || $ismanager) { &status("Waiting for init from $clientip $clientname"); @@ -6537,7 +7275,6 @@ sub make_new_child { # # If the remote is attempting a local init... give that a try: # - logthis("remotereq: $remotereq"); (my $i, my $inittype, $clientversion) = split(/:/, $remotereq); # For LON-CAPA 2.9, the client session will have sent its LON-CAPA # version when initiating the connection. For LON-CAPA 2.8 and older, @@ -6549,7 +7286,32 @@ sub make_new_child { # If the connection type is ssl, but I didn't get my # certificate files yet, then I'll drop back to # insecure (if allowed). - + + if ($inittype eq "ssl") { + my $context; + if ($clientsamedom) { + $context = 'dom'; + if ($secureconf{'connfrom'}{'dom'} eq 'no') { + $inittype = ""; + } + } elsif ($clientsameinst) { + $context = 'intdom'; + if ($secureconf{'connfrom'}{'intdom'} eq 'no') { + $inittype = ""; + } + } else { + $context = 'other'; + if ($secureconf{'connfrom'}{'other'} eq 'no') { + $inittype = ""; + } + } + if ($inittype eq '') { + &logthis(" Domain config set " + ."to no ssl for $clientname (context: $context)" + ." -- trying insecure auth"); + } + } + if($inittype eq "ssl") { my ($ca, $cert) = lonssl::CertificateFile; my $kfile = lonssl::KeyFile; @@ -6582,7 +7344,7 @@ sub make_new_child { close $client; } } elsif ($inittype eq "ssl") { - my $key = SSLConnection($client); + my $key = SSLConnection($client,$clientname); if ($key) { $clientok = 1; my $cipherkey = pack("H32", $key); @@ -6597,6 +7359,7 @@ sub make_new_child { } } else { + $clientinfoset = &set_client_info(); my $ok = InsecureConnection($client); if($ok) { $clientok = 1; @@ -6636,9 +7399,34 @@ sub make_new_child { # ------------------------------------------------------------ Process requests my $keep_going = 1; my $user_input; - my $clienthost = &Apache::lonnet::hostname($clientname); - my $clientserverhomeID = &Apache::lonnet::get_server_homeID($clienthost); - $clienthomedom = &Apache::lonnet::host_domain($clientserverhomeID); + unless ($clientinfoset) { + $clientinfoset = &set_client_info(); + } + $clientremoteok = 0; + unless ($clientsameinst) { + $clientremoteok = 1; + my $defdom = &Apache::lonnet::host_domain($perlvar{'lonHostID'}); + %clientprohibited = &get_prohibited($defdom); + if ($clientintdom) { + my $remsessconf = &get_usersession_config($defdom,'remotesession'); + if (ref($remsessconf) eq 'HASH') { + if (ref($remsessconf->{'remote'}) eq 'HASH') { + if (ref($remsessconf->{'remote'}->{'excludedomain'}) eq 'ARRAY') { + if (grep(/^\Q$clientintdom\E$/,@{$remsessconf->{'remote'}->{'excludedomain'}})) { + $clientremoteok = 0; + } + } + if (ref($remsessconf->{'remote'}->{'includedomain'}) eq 'ARRAY') { + if (grep(/^\Q$clientintdom\E$/,@{$remsessconf->{'remote'}->{'includedomain'}})) { + $clientremoteok = 1; + } else { + $clientremoteok = 0; + } + } + } + } + } + } while(($user_input = get_request) && $keep_going) { alarm(120); Debug("Main: Got $user_input\n"); @@ -6654,7 +7442,7 @@ sub make_new_child { &logthis("WARNING: " ."Rejected client $clientip, closing connection"); } - } + } # ============================================================================= @@ -6668,6 +7456,60 @@ sub make_new_child { exit; } + +# +# Used to determine if a particular client is from the same domain +# as the current server, or from the same internet domain. +# +# Optional input -- the client to check for domain and internet domain. +# If not specified, defaults to the package variable: $clientname +# +# If called in array context will not set package variables, but will +# instead return an array of two values - (a) true if client is in the +# same domain as the server, and (b) true if client is in the same internet +# domain. +# +# If called in scalar context, sets package variables for current client: +# +# $clienthomedom - LonCAPA domain of homeID for client. +# $clientsamedom - LonCAPA domain same for this host and client. +# $clientintdom - LonCAPA "internet domain" for client. +# $clientsameinst - LonCAPA "internet domain" same for this host & client. +# +# returns 1 to indicate package variables have been set for current client. +# + +sub set_client_info { + my ($lonhost) = @_; + $lonhost ||= $clientname; + my $clienthost = &Apache::lonnet::hostname($lonhost); + my $clientserverhomeID = &Apache::lonnet::get_server_homeID($clienthost); + my $homedom = &Apache::lonnet::host_domain($clientserverhomeID); + my $samedom = 0; + if ($perlvar{'lonDefDom'} eq $homedom) { + $samedom = 1; + } + my $intdom = &Apache::lonnet::internet_dom($clientserverhomeID); + my $sameinst = 0; + if ($intdom ne '') { + my $internet_names = &Apache::lonnet::get_internet_names($currenthostid); + if (ref($internet_names) eq 'ARRAY') { + if (grep(/^\Q$intdom\E$/,@{$internet_names})) { + $sameinst = 1; + } + } + } + if (wantarray) { + return ($samedom,$sameinst); + } else { + $clienthomedom = $homedom; + $clientsamedom = $samedom; + $clientintdom = $intdom; + $clientsameinst = $sameinst; + return 1; + } +} + # # Determine if a user is an author for the indicated domain. # @@ -6878,7 +7720,18 @@ sub validate_user { } if ($howpwd ne 'nouser') { if($howpwd eq "internal") { # Encrypted is in local password file. - $validated = (crypt($password, $contentpwd) eq $contentpwd); + if (length($contentpwd) == 13) { + $validated = (crypt($password,$contentpwd) eq $contentpwd); + if ($validated) { + my $ncpass = &hash_passwd($domain,$password); + if (&rewrite_password_file($domain,$user,"$howpwd:$ncpass")) { + &update_passwd_history($user,$domain,$howpwd,'conversion'); + &logthis("Validated password hashed with bcrypt for $user:$domain"); + } + } + } else { + $validated = &check_internal_passwd($password,$contentpwd,$domain); + } } elsif ($howpwd eq "unix") { # User is a normal unix user. $contentpwd = (getpwnam($user))[1]; @@ -6946,6 +7799,39 @@ sub validate_user { return $validated; } +sub check_internal_passwd { + my ($plainpass,$stored,$domain) = @_; + my (undef,$method,@rest) = split(/!/,$stored); + if ($method eq "bcrypt") { + my $result = &hash_passwd($domain,$plainpass,@rest); + if ($result ne $stored) { + return 0; + } + # Upgrade to a larger number of rounds if necessary + my $defaultcost; + my %domconfig = + &Apache::lonnet::get_dom('configuration',['password'],$domain); + if (ref($domconfig{'password'}) eq 'HASH') { + $defaultcost = $domconfig{'password'}{'cost'}; + } + if (($defaultcost eq '') || ($defaultcost =~ /D/)) { + $defaultcost = 10; + } + return 1 unless($rest[0]<$defaultcost); + } + return 0; +} + +sub get_last_authchg { + my ($domain,$user) = @_; + my $lastmod; + my $logname = &propath($domain,$user).'/passwd.log'; + if (-e "$logname") { + $lastmod = (stat("$logname"))[9]; + } + return $lastmod; +} + sub krb4_authen { my ($password,$null,$user,$contentpwd) = @_; my $validated = 0; @@ -7261,26 +8147,26 @@ sub change_unix_password { sub make_passwd_file { - my ($uname,$udom,$umode,$npass,$passfilename)=@_; + my ($uname,$udom,$umode,$npass,$passfilename,$action)=@_; my $result="ok"; if ($umode eq 'krb4' or $umode eq 'krb5') { { my $pf = IO::File->new(">$passfilename"); if ($pf) { print $pf "$umode:$npass\n"; + &update_passwd_history($uname,$udom,$umode,$action); } else { $result = "pass_file_failed_error"; } } } elsif ($umode eq 'internal') { - my $salt=time; - $salt=substr($salt,6,2); - my $ncpass=crypt($npass,$salt); + my $ncpass = &hash_passwd($udom,$npass); { &Debug("Creating internal auth"); my $pf = IO::File->new(">$passfilename"); if($pf) { - print $pf "internal:$ncpass\n"; + print $pf "internal:$ncpass\n"; + &update_passwd_history($uname,$udom,$umode,$action); } else { $result = "pass_file_failed_error"; } @@ -7290,61 +8176,14 @@ sub make_passwd_file { my $pf = IO::File->new(">$passfilename"); if($pf) { print $pf "localauth:$npass\n"; + &update_passwd_history($uname,$udom,$umode,$action); } else { $result = "pass_file_failed_error"; } } } elsif ($umode eq 'unix') { - { - # - # Don't allow the creation of privileged accounts!!! that would - # be real bad!!! - # - my $uid = getpwnam($uname); - if((defined $uid) && ($uid == 0)) { - &logthis(">>>Attempt to create privileged account blocked"); - return "no_priv_account_error\n"; - } - - my $execpath ="$perlvar{'lonDaemons'}/"."lcuseradd"; - - my $lc_error_file = $execdir."/tmp/lcuseradd".$$.".status"; - { - &Debug("Executing external: ".$execpath); - &Debug("user = ".$uname.", Password =". $npass); - my $se = IO::File->new("|$execpath > $perlvar{'lonDaemons'}/logs/lcuseradd.log"); - print $se "$uname\n"; - print $se "$udom\n"; - print $se "$npass\n"; - print $se "$npass\n"; - print $se "$lc_error_file\n"; # Status -> unique file. - } - if (-r $lc_error_file) { - &Debug("Opening error file: $lc_error_file"); - my $error = IO::File->new("< $lc_error_file"); - my $useraddok = <$error>; - $error->close; - unlink($lc_error_file); - - chomp $useraddok; - - if($useraddok > 0) { - my $error_text = &lcuseraddstrerror($useraddok); - &logthis("Failed lcuseradd: $error_text"); - $result = "lcuseradd_failed:$error_text"; - } else { - my $pf = IO::File->new(">$passfilename"); - if($pf) { - print $pf "unix:\n"; - } else { - $result = "pass_file_failed_error"; - } - } - } else { - &Debug("Could not locate lcuseradd error: $lc_error_file"); - $result="bug_lcuseradd_no_output_file"; - } - } + &logthis(">>>Attempt to create unix account blocked -- unix auth not available for new users."); + $result="no_new_unix_accounts"; } elsif ($umode eq 'none') { { my $pf = IO::File->new("> $passfilename"); @@ -7400,16 +8239,46 @@ sub get_usersession_config { return $usersessionconf; } else { my %domconfig = &Apache::lonnet::get_dom('configuration',['usersessions'],$dom); - if (ref($domconfig{'usersessions'}) eq 'HASH') { - &Apache::lonnet::do_cache_new($name,$dom,$domconfig{'usersessions'},3600); - return $domconfig{'usersessions'}; - } + &Apache::lonnet::do_cache_new($name,$dom,$domconfig{'usersessions'},3600); + return $domconfig{'usersessions'}; } return; } - - +sub get_prohibited { + my ($dom) = @_; + my $name = 'trust'; + my ($trustconfig,$cached)=&Apache::lonnet::is_cached_new($name,$dom); + unless (defined($cached)) { + my %domconfig = &Apache::lonnet::get_dom('configuration',['trust'],$dom); + &Apache::lonnet::do_cache_new($name,$dom,$domconfig{'trust'},3600); + $trustconfig = $domconfig{'trust'}; + } + my %prohibited; + if (ref($trustconfig)) { + foreach my $prefix (keys(%{$trustconfig})) { + if (ref($trustconfig->{$prefix}) eq 'HASH') { + my $reject; + if (ref($trustconfig->{$prefix}->{'exc'}) eq 'ARRAY') { + if (grep(/^\Q$clientintdom\E$/,@{$trustconfig->{$prefix}->{'exc'}})) { + $reject = 1; + } + } + if (ref($trustconfig->{$prefix}->{'inc'}) eq 'ARRAY') { + if (grep(/^\Q$clientintdom\E$/,@{$trustconfig->{$prefix}->{'inc'}})) { + $reject = 0; + } else { + $reject = 1; + } + } + if ($reject) { + $prohibited{$prefix} = 1; + } + } + } + } + return %prohibited; +} sub distro_and_arch { return $dist.':'.$arch; @@ -7594,7 +8463,7 @@ Allow for a password to be set. Make a user. -=item passwd +=item changeuserauth Allow for authentication mechanism and password to be changed. @@ -7683,6 +8552,10 @@ for each student, defined perhaps by the Returns usernames corresponding to IDs. (These "IDs" are unique identifiers for each student, defined perhaps by the institutional Registrar.) +=item iddel + +Deletes one or more ids in a domain's id database. + =item tmpput Accept and store information in temporary space.