--- loncom/xml/lonplot.pm	2001/12/18 15:33:47	1.2
+++ loncom/xml/lonplot.pm	2001/12/19 22:14:20	1.9
@@ -1,7 +1,7 @@
 # The LearningOnline Network with CAPA
 # Dynamic plot
 #
-# $Id: lonplot.pm,v 1.2 2001/12/18 15:33:47 matthew Exp $
+# $Id: lonplot.pm,v 1.9 2001/12/19 22:14:20 matthew Exp $
 #
 # Copyright Michigan State University Board of Trustees
 #
@@ -25,7 +25,8 @@
 #
 # http://www.lon-capa.org/
 #
-# 2/21 Guy
+# 12/15/01 Matthew
+# 12/18 Matthew
 package Apache::lonplot;
 use strict;
 use Apache::response;
@@ -36,7 +37,6 @@ sub BEGIN {
   &Apache::lonxml::register('Apache::lonplot',('plot'));
 }
 
-
 ##
 ## Tests used in checking the validitity of input
 ##
@@ -47,7 +47,7 @@ my $onoff_test     = sub {$_[0]=~/^(on|o
 my $key_pos_test   = sub {$_[0]=~/^(top|bottom|right|left|outside|below)+$/};
 my $sml_test       = sub {$_[0]=~/^(small|medium|large)$/};
 my $linestyle_test = sub {$_[0]=~/^(lines|linespoints|dots|points|steps)$/};
-
+my $words_test     = sub {$_[0]=~/^((\w+\b*)+$/};
 ##
 ## Default values for attributes of elements
 ##
@@ -55,34 +55,33 @@ my %plot_defaults =
     (
      height       => {default => 200,       test => $int_test  },
      width        => {default => 200,       test => $int_test  },
-     bgcolor      => {default => "xffffff", test => $color_test},
-     fgcolor      => {default => "x000000", test => $color_test},
-     transparent  => {default => "off",     test => $onoff_test},
-     grid         => {default => "off",     test => $onoff_test},
-     border       => {default => "on" ,     test => $onoff_test},
-     font         => {default => "medium",  test => $sml_test  }
+     bgcolor      => {default => 'xffffff', test => $color_test},
+     fgcolor      => {default => 'x000000', test => $color_test},
+     transparent  => {default => 'off',     test => $onoff_test},
+     grid         => {default => 'off',     test => $onoff_test},
+     border       => {default => 'on',      test => $onoff_test},
+     font         => {default => 'medium',  test => $sml_test  }
      );
 
 my %key_defaults = 
     (
-     title => { default => "on" ,        test => $onoff_test  },
-     box   => { default => "off" ,       test => $onoff_test  },
-     pos   => { default => "top right" , test => $key_pos_test}
+     title => { default => '',          test => $words_test  },
+     box   => { default => 'off',       test => $onoff_test  },
+     pos   => { default => 'top right', test => $key_pos_test}
      );
 
 my %label_defaults = 
     (
      xpos    => {default => 0,         test => $real_test                   },
      ypos    => {default => 0,         test => $real_test                   },
-     color   => {default => "x000000", test => $color_test                  },
-     justify => {default => "left",    
+     justify => {default => 'left',    
                  test => sub {$_[0]=~/^(left|right|center)$/}}
      );
 
 my %axis_defaults = 
     (
-     color     => {default => "x000000", test => $color_test},
-     thickness => {default => 1,         test => $int_test  },
+     color     => {default => 'x000000', test => $color_test},
+#     thickness => {default => 1,         test => $int_test  },
      xmin      => {default => -10.0,     test => $real_test },
      xmax      => {default =>  10.0,     test => $real_test },
      ymin      => {default => -10.0,     test => $real_test },
@@ -91,9 +90,9 @@ my %axis_defaults =
 
 my %curve_defaults = 
     (
-     color     => {default => "x000000", test => $color_test      },
-     name      => {default => "x000000", test => sub {$_[0]=~/^[\w ]*$/} },
-     linestyle => {default => "lines",   test => $linestyle_test  }
+     color     => {default => 'x000000', test => $color_test      },
+     name      => {default => 'x000000', test => sub {$_[0]=~/^[\w ]*$/} },
+     linestyle => {default => 'lines',   test => $linestyle_test  }
      );
 
 ##
@@ -105,42 +104,43 @@ sub start_plot {
     %plot = '';   %key='';    %axis=''; 
     $title='';    $xlabel=''; $ylabel='';
     @labels = ''; @curves='';
-
+    #
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result='';
     &Apache::lonxml::register('Apache::plot',
 	     ('title','xlabel','ylabel','key','axis','label','curve'));
     push (@Apache::lonxml::namespace,'plot');
-    ##-------------------------------------------------------
-    ## How do I do this?  I need to "eval" and I need to keep the info
-    ## available for the parser.
-    ##
+    ## Always evaluate the insides of the <plot></plot> tags
     my $inside = &Apache::lonxml::get_all_text("/plot",$$parser[-1]);
-    my $eval=&Apache::lonxml::get_param('eval',$parstack,$safeeval);
-    if ($eval eq 'on') {
-	$inside=&Apache::run::evaluate($inside,$safeeval,$$parstack[-1]);
-	#&Apache::lonxml::debug("M is evaulated to:$inside:");
-    }
+    $inside=&Apache::run::evaluate($inside,$safeeval,$$parstack[-1]);
+    &Apache::lonxml::newparser($parser,\$inside);
     ##-------------------------------------------------------
     &get_attributes(\%plot,\%plot_defaults,$parstack,$safeeval,'plot');
+    if ($target eq 'web') {
+    }
     return '';
 }
 
 sub end_plot {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     pop @Apache::lonxml::namespace;
-    my $result;
-    ## Determine filename
-    my $tmpdir = '/home/httpd/perl/tmp/';
-    my $filename = $tmpdir.$ENV{'user.name'}.'_'.$ENV{'user.domain'}.
-	'_plot.data';
-    my $usersees=md5_base64($filename.'_'.$ENV{'REMOTE_ADDR'});
-    
-    ## Write the plot description to the file
-    my $fh=&Apache::File->new('/home/httpd/perl/tmp/'.$realname);
-    ## Ack! 
-    ## return image tag for the plot
-    $result = '<img src=\"/cgi-bin/plot.cgi?'.$usersees.'"';
+    &Apache::lonxml::deregister('Apache::lonplot',
+	('title','xlabel','ylabel','key','axis','label','curve'));
+    my $result = '';
+    if ($target eq 'web') {
+	## Determine filename -- Need to use the 'id' thingy that Gerd 
+	## mentioned.
+	my $tmpdir = '/home/httpd/perl/tmp/';
+	my $filename = $tmpdir.$ENV{'user.name'}.'_'.$ENV{'user.domain'}.
+	    '_plot.data';
+	my $usersees=md5_base64($filename.'_'.$ENV{'REMOTE_ADDR'});
+	
+	## Write the plot description to the file
+	my $fh=&Apache::File->new('/home/httpd/perl/tmp/'.$realname);
+	&write_gnuplot_file($fh);
+	## return image tag for the plot
+	$result = '<img src=\"/cgi-bin/plot.cgi?'.$usersees.'"';
+    }
     return $result;
 }
 
@@ -148,13 +148,19 @@ sub end_plot {
 sub start_key {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result='';
-    &get_attributes(\%key,\%key_defaults,$parstack,$safeeval,'key');
+    &get_attributes(\%key,\%key_defaults,$parstack,$safeeval,$tagstack);
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
 
 sub end_key {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result = '';
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
 ##------------------------------------------------------------------- title
@@ -162,12 +168,18 @@ sub start_title {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     $title = &Apache::lonxml::get_all_text("/title",$$parser[-1]);
     my $result='';
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
 
 sub end_title {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result = '';
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
 ##------------------------------------------------------------------- xlabel
@@ -175,12 +187,18 @@ sub start_xlabel {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result='';
     $xlabel = &Apache::lonxml::get_all_text("/xlabel",$$parser[-1]);
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
 
 sub end_xlabel {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result = '';
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
 ##------------------------------------------------------------------- ylabel
@@ -188,28 +206,40 @@ sub start_ylabel {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result='';
     $ylabel = &Apache::lonxml::get_all_text("/ylabel",$$parser[-1]);
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
 
 sub end_ylabel {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result = '';
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
 ##------------------------------------------------------------------- label
 sub start_label {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result='';
-    my $label = &newhashref();
-    &get_attributes($label,\%label_defaults,$parstack,$safeeval,'label');
+    my %label;
+    &get_attributes($label,\%label_defaults,$parstack,$safeeval,$tagstack);
     $label->{'text'} = &Apache::lonxml::get_all_text("/label",$$parser[-1]);
-    push(@labels,$label);
+    push(@labels,\%label);
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
 
 sub end_label {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result = '';
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
 
@@ -217,50 +247,83 @@ sub end_label {
 sub start_curve {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result='';
-    my $curve = &newhashref();
-    &get_attributes($curve,\%curve_defaults,$parstack,$safeeval,'curve');
+    my %curve;
+    &get_attributes($curve,\%curve_defaults,$parstack,$safeeval,$tagstack);
     push (@curves,$curve);
-    
-    &Apache::lonxml::register('Apache::plot',('function','data'));
+    &Apache::lonxml::register('Apache::lonplot',('function','data'));
     push (@Apache::lonxml::namespace,'curve');
-    
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
 
 sub end_curve {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result = '';
+    pop @Apache::lonxml::namespace;
+    &Apache::lonxml::deregister('Apache::lonplot',('function','data'));
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
-
 ##------------------------------------------------------------ curve function
 sub start_function {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result='';
-
+    if (exists($curves[-1]->{'data'}) {
+	&Apache::lonxml::warning('Use of <function> precludes use of <data>.  The <data> will be omitted in favor of the <function> declaration.');
+	delete($curves[-1]->{'data'});
+    }
     $curves[-1]->{'function'} = 
 	&Apache::lonxml::get_all_text("/function",$$parser[-1]);
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
 
 sub end_function {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result = '';
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
-
 ##------------------------------------------------------------ curve  data
 sub start_data {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result='';
-    push( @{$curves[-1]->{'data'}},
-	  &Apache::lonxml::get_all_text("/data",$$parser[-1]));
+    if (exists($curves[-1]->{'function'})) {
+	&Apache::lonxml::warning('Use of <data> precludes use of <function>.  The <function> will be omitted in favor of the <data> declaration.');
+	delete($curves[-1]->{'function'});
+    }
+    my $datatext = &Apache::lonxml::get_all_text("/data",$$parser[-1]);
+    $datatext =~ s/(\s+$|^\s+)//g;
+    $datatext =~ s/\s+/ /g;
+    if ($datatext !~ /^(([+-]?\d*\.?\d*)[, ]?)+$/) {
+	&Apache::lonxml::warning('Malformed data: '.$datatext);
+	$datatext = '';
+    }
+    # Need to do some error checking on the @data array - 
+    # make sure it's all numbers and make sure each array 
+    # is of the same length.
+    my @data = split /[, ]/,$datatext;
+    push( @{$curves[-1]->{'data'}},\@data;
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
 
 sub end_data {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result = '';
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
 
@@ -268,22 +331,23 @@ sub end_data {
 sub start_axis {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result='';
-    &get_attributes(\%axis,\%label_defaults,$parstack,$safeeval,'axis');
+    &get_attributes(\%axis,\%label_defaults,$parstack,$safeeval,$tagstack);
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
 
 sub end_axis {
     my ($target,$token,$tagstack,$parstack,$parser,$safeeval,$style)=@_;
     my $result = '';
+    if ($target eq 'web') {
+	# This routine should never return anything.
+    }
     return $result;
 }
 
 ##------------------------------------------------------------------- misc
-sub newhashref{
-    my %hash;
-    return \%hash;
-}
-
 sub get_attributes{
     %values   = %{shift};
     %defaults = %{shift};
@@ -293,13 +357,110 @@ sub get_attributes{
     my $attr;
     foreach $attr (keys %defaults) {
 	$values{$attr} = &Apache::lonxml::get_param($attr,$parstack,$safeeval);
+	if ($values{$attr} eq '' | !defined($values{$attr})) {
+	    $values{$attr} = $defaults{$attr};
+	    next;
+	}
 	my $test = $defaults{$attr}->{'test'};
 	if (! &$test($values{$attr})) {
-	    &Apache::lonxml::warning($tag.':'.$attr.': Bad value.  Replacing your value with : '.$defaults{$attr});
+	    &Apache::lonxml::warning
+		($tag.':'.$attr.': Bad value.'.'Replacing your value with : '
+		 .$defaults{$attr} );
 	    $values{$attr} = $defaults{$attr};
     }
     return ;
 }
 
+sub write_gnuplot_file {
+    my $fh = shift;
+    my $gnuplot_input = '';
+    # Collect all the colors
+    my @Colors;
+    push @Colors, $plot{'bgcolor'};
+    push @Colors, $plot{'fgcolor'}; 
+    push @Colors, $axis{'color'};
+    push @Colors, $axis{'color'}; 
+    foreach $curve (@curves) {
+	push @Colors, ($curve->{'color'} ne '' ? 
+		       $curve->{'color'}       : 
+		       $plot{'fgcolor'}      );
+    }
+    # set term
+    $gnuplot_input .= 'set term gif ';
+    $gnuplot_input .= 'transparent ' if ($plot{'transparent'} eq 'on');
+    $gnuplot_input .= $plot{'font'} . ' ';
+    $gnuplot_input .= 'size ' . $plot{'width'} . ',';
+    $gnuplot_input .= $plot{'height'} . ' ';
+    $gnuplot_input .= "@Colors\n";
+    # grid
+    $gnuplot_input .= ($plot{'grid'} eq 'on' ?
+		       'set grid'.$/            :
+		       ''                      );
+    # border
+    $gnuplot_input .= ($plot{'border'} eq 'on'?
+		       'set border'.$/           :
+		       'set noborder'.$/         );    # title, xlabel, ylabel
+    {
+    $gnuplot_input .= <<"ENDLABELS";
+set output "tmp.gif"
+set title  "$title"
+set xlabel "$xlabel"
+set ylabel "$ylabel"
+set xrange \[$axis{'xmin'}:$axis{'xmax'}\]
+set yrange \[$axis{'ymin'}:$axis{'ymax'}\]
+ENDLABELS
+    }
+    # Key
+    if (defined($key{'pos'})) {
+	$gnuplot_input .= 'set key '.$key{'pos'}.' ';
+	$gnuplot_input .= ($key{'box'} eq 'on' ? 'box ' : 'nobox ');
+	if ($key{'title'} ne '') {
+	    $gnuplot_input .= 'title "'.$key{'title'}.'"'.$/;
+	} else {
+	    $gnuplot_input .= $/;
+	}
+    } else {
+	$gnuplot_input .= 'set nokey'.$/;
+    }    
+    # labels
+    foreach $label (@labels) {
+	$gnuplot_input .= 'set label "'.$label->{'text'}.'" at '.
+	    $label->{'xpos'}.','.$label->{'ypos'}.' '.$label->{'justify'}.$/ ;
+    }
+    # curves
+    $gnuplot_input .= 'plot ';
+    my $datatext = '';
+    for (my $i = 0;$i<=$#curves;$i++) {
+	$curve = $curves[$i];
+	$gnuplot_input.= ', ' if ($i > 0);
+	if (exists($curve->{'function'})) {
+	    $gnuplot_input.= 
+		$curve->{'function'}.' title "'.
+		$curve->{'name'}.'" with '.
+		$curve->{'linestyle'};
+	} elsif (exists($curve->{'data'})) {
+	    $gnuplot_input.= '\'-\' title "'.
+		$curve->{'name'}.'" with '.
+		$curve->{'linestyle'};
+	    my @Data = @{$curve->{'data'}};
+	    my @Data0 = @{$Data[0]};
+	    for (my $i =0; $i<=$#Data0; $i++) {
+		foreach $dataset (@Data) {
+		    $datatext .= $dataset->[$i] . ' ';
+		}
+		$datatext .= $/;
+	    }
+	    $datatext .=$/;
+	}
+    }
+    $gnuplot_input .= $/.$datatext;
+    print $fh $gnuplot_input;
+}
+
 1;
 __END__
+
+
+
+
+