--- doc/build/suse10.3_install.frag	2008/05/22 21:39:15	1.2
+++ doc/build/suse10.3_install.frag	2009/09/07 14:56:19	1.4
@@ -1,36 +1,41 @@
 <h1>Installing LON-CAPA on a minimal SuSE Linux 10.3 System</h1>
 <p>
 This document guides you through the process of setting up a new LON-CAPA
-server running SuSE Linux 10.3 with a minimum of packages installed.  
-The computer will be configured solely as a LON-CAPA server and will be 
+server running SuSE Linux 10.3 with a minimum of packages installed.
+The computer will be configured solely as a LON-CAPA server and will be
 expected to have no other services running.  Your server is expected to have a reasonably fast connection to the internet.
 </p><p>
-More information is available at 
+More information is available at
 <a href="http://install.lon-capa.org/">http://install.lon-capa.org/</a>.
 </p>
+
 <h2>Before you begin</h2>
 <p>
 Installing Linux is getting easier and easier. You will be required to log in to the machine and execute some routine Unix commands.  Familiarity with the Apache web server, mod_perl, perl, and MySQL are not required to install and run LON-CAPA.
 </p>
+
 <h2>Installation Overview</h2>
 <p>
 The installation process takes the following steps:
 </p>
 <ol>
-  <li> Obtain SuSE 10.3 installation media (DVD, or CD)</li>
-  <li> Determine Network Settings</li>
-  <li> Install Suse 10.3</li>
-  <li> Update your system</li>
-  <li> Install LON-CAPA</li>
-  <li> Create a Domain Coordinator</li>
-  <li> Start/Restart services</li>
-  <li> Log in to LON-CAPA</li>
+  <li><a href="#obt">Obtain SuSE 10.3 installation media (DVD, or CD)</a></li>
+  <li><a href="#net">Determine Network Settings</a></li>
+  <li><a href="#lin">Install Suse 10.3</a></li>
+  <li><a href="#upd">Update your system</a></li>
+  <li><a href="#ilc">Install LON-CAPA</a></li>
+  <li><a href="#cdc">Create a Domain Coordinator</a></li>
+  <li><a href="#sts">Start/Restart services</a></li>
+  <li><a href="#log">Log in to LON-CAPA</a></li>
 </ol>
-<h2>Obtain SuSE Linux 10.3</h2>
+<hr />
+
+<h2>1. <a name="obt">Obtain SuSE Linux 10.3</a></h2>
 <p>
 A SuSE 10.3 iso for burning to DVD can be obtained from the opensuse download site: <a href="http://software.opensuse.org/">http://http://software.opensuse.org/</a>, or from an opensuse mirror site - <a href="http://en.opensuse.org/Mirrors_Released_Version">http://en.opensuse.org/Mirrors_Released_Version</a>.  You will also find links there to sites with iso files for burning a Start-CD-Image (a mini.iso) used in a network install, if burning a CD is more convenient for you.
-</p> 
-<h2>Determine Network Settings</h2>
+</p>
+
+<h2>2. <a name="net">Determine Network Settings</a></h2>
 <p>
 You will need to know the following network settings for your installation.
 <b>Note:</b>You must have a static IP address to use LON-CAPA.
@@ -43,10 +48,11 @@ DHCP is <em>not</em> supported.
   <li>gateway </li>
   <li>domain name server(s) </li>
 </ul>
-<h2>Minimal SuSE 10.3 Install</h2>
+
+<h2>3. <a name="lin">Minimal SuSE 10.3 Install</a></h2>
 <p>
 Installing SuSE 10.3 is quite easy if you've installed Linux products
-before.  Some documentation is available from 
+before.  Some documentation is available from
 <a href="http://en.opensuse.org/INSTALL_Local">
 http://en.opensuse.org/INSTALL_Local</a> for installations from DVD and
 <a href="http://en.opensuse.org/INSTALL_Internet">http://en.opensuse.org/INSTALL_Internet</a> for installations via the network, booting from the mini.iso CD.<br /><br />
@@ -61,19 +67,19 @@ There are a few steps that require comme
    <dt>Software Selection</dt>
    <dd>Choose Expert Mode and for Software enable Base System, Yast Installation Packages and Software Management</dd>
    <dt>Partitioning your Drive</dt>
-   <dd>For a LON-CAPA library server (i.e., the main server used 
-       for permanent storage of course and user data), 
-       a separate partition is recommended for /home, as this    
+   <dd>For a LON-CAPA library server (i.e., the main server used
+       for permanent storage of course and user data),
+       a separate partition is recommended for /home, as this
        simplifies future upgrades of the operating system.
-       If you are adding an additional access server to an 
-       existing LON-CAPA domain, this does not apply as no 
+       If you are adding an additional access server to an
+       existing LON-CAPA domain, this does not apply as no
        permenent data are stored on an access server.
        As LON-CAPA resource files are stored in the /home directory,
        the majority of the disk space should be allocated here.
-       If you have 20 GB of space for SuSE 10.3, /home should 
-       receive at least 10 to 12 gigs. Since MySQL uses the /var 
-       filesystem to store its databases you should have as least 
-       4 gigs of space available on /var.  Be sure to 
+       If you have 20 GB of space for SuSE 10.3, /home should
+       receive at least 10 to 12 gigs. Since MySQL uses the /var
+       filesystem to store its databases you should have as least
+       4 gigs of space available on /var.  Be sure to
        include adequate swap space.  A minimum is 512 Megs, but you should
        typically have 1 or 2x as much swap space as you do physical RAM.
        </dd>
@@ -96,7 +102,8 @@ proceed to have you create a user accoun
 and let you configure any extra hardware, and then finish up the boot
 process. At the prompt login as root.
 </p>
-<h2>Change software sources for your system</h2>
+
+<h2>4. <a name="upd">Change software sources for your system</a></h2>
 <p>If you do not already have a SuSE 10.3 installation source at your location, you may want to consider creating one from the iso file for the DVD. Proceed as follows (e.g., for 32 bit):</p>
 <pre>
 mkdir -p suse103/DVD
@@ -127,9 +134,10 @@ Select "Installation Source" and change
 <dd>Authentication</dd>
 <dt>Anonymous</dt>
 </dl>
-After saving this configuration information for the LON-CAPA repository, you will need to import a public LON-CAPA key, before the catalog is read, and the repository is available to you. Quit yast.    
+After saving this configuration information for the LON-CAPA repository, you will need to import a public LON-CAPA key, before the catalog is read, and the repository is available to you. Quit yast.
 </p>
-<h2>Installing LON-CAPA</h2>
+
+<h2>5. <a name="ilc">Installing LON-CAPA</a></h2>
 <h3>Install prerequisites</h3>
 <p> Execute: </p>
 <pre>
@@ -171,23 +179,23 @@ for it to function at all.  Below is a l
   <dd>The server must be designated a 'library' or an 'access' server.  In
       general you should have a library server for your instructors to create
       their course content on and run their courses.  Students should connect
-      to access servers.  If you are doing the first install of LON-CAPA at 
+      to access servers.  If you are doing the first install of LON-CAPA at
       your site, or if you are playing with it for your own edification you
       should make your machine a 'library' server.</dd>
   <dt>LON-CAPA domain</dt>
   <dd>Each site or school which installs LON-CAPA needs its own domain.
       Here at MSU we use 'msu'.  You should choose something short but
-      meaningful.  <i>Restriction: One word, no hyphens, underscores, or 
+      meaningful.  <i>Restriction: One word, no hyphens, underscores, or
       special characters.</i>
   </dd>
   <dt>LON-CAPA host id</dt>
   <dd>Each LON-CAPA server requires a unique internal name.  We use names
-      such as "msul1" for the first library server. <i>Restriction: One word, 
+      such as "msul1" for the first library server. <i>Restriction: One word,
       no hyphens, underscores, or special characters.</i>
   </dd>
   <dt>Host administrator email</dt>
   <dd>The amount of email sent to this address is relatively minimal.  Messages
-      are sent every time the system starts up, or if the system is in 
+      are sent every time the system starts up, or if the system is in
       serious trouble. On a laptop, make this <tt>root@localhost</tt>.
   </dd>
 </dl>
@@ -201,17 +209,18 @@ cd /root/loncapa-N.N     (N.N should cor
 ./UPDATE
 </pre>
 <p>
-You will need to enter the LON-CAPA configuration information you determined 
-in the previous section.  
+You will need to enter the LON-CAPA configuration information you determined
+in the previous section.
 </p>
-<h2>Creating a Domain Coordinator</h2>
+
+<h2>6. <a name="cdc">Creating a Domain Coordinator</a></h2>
 <p>
 You will need at least one user at your site who has the role of
 'domain coordinator'.  This user creates accounts for other users and
 grants them additional privileges.  The make_domain_coordinator.pl script
 invoked below requires that you enter the users password.  The password will
 show in plaintext as you type it.  Feel free to use the "passwd username"
-command to change it later.  Replace USERNAME and DOMAIN with an 
+command to change it later.  Replace USERNAME and DOMAIN with an
 appropriate user name and your domain.
 </p>
 <pre>
@@ -219,7 +228,8 @@ cd /root/loncapa-N.N/loncom/build
 perl make_domain_coordinator.pl USERNAME DOMAIN
 (WILL PROMPT FOR PASSWORD HERE)
 </pre>
-<h2>Start/Restart Services</h2>
+
+<h2>7. <a name="sts">Start/Restart Services</a></h2>
 <p>
 The LON-CAPA network services take a moment to start.  Most misconfigurations
 will be apparent at this step.
@@ -230,22 +240,25 @@ will be apparent at this step.
 </pre>
 <p>
 If you receive warnings about missing perl modules when starting apache2,
-please make sure you followed the instructions in 
+please make sure you followed the instructions in
 <b>Installing LON-CAPA Dependencies</b>.  If you still have errors, please
-contact the LON-CAPA support team.
+contact the MSU LON-CAPA group.
 </p>
-<h2>Log in to your LON-CAPA Machine</h2>
+
+<h2>8. <a name="log">Log in to your LON-CAPA Machine</a></h2>
 <p>
 Point a web browser at your new machine and log in as the domain
 coordinator.  Congratulations!
 </p>
+
+<hr />
 <h2>If things aren't working right</h2>
 <p>
 If you've followed the steps above and the server doesn't start or you think
-there's something wrong, please get in touch with the LON-CAPA support team.
+there's something wrong, please get in touch with the MSU LON-CAPA group.
 You can submit a help request using our web form:<br />
-<a href="http://support.loncapa.org/help/">http://support.loncapa.org/help/</a><br />
+<a href="http://help.loncapa.org/help/">http://help.loncapa.org/help/</a><br />
 If there were errors in installation of the dependency RPMs or during the
-automatic setup, please send us as much information as possible. 
+automatic setup, please send us as much information as possible.
 Please let us know if any parts of this document are unclear.
 </p>