Annotation of doc/build/ubuntu14LTS_install.frag, revision 1.6
1.1 raeburn 1: <h1>Installing LON-CAPA on a basic Ubuntu 14.04 LTS Server</h1>
2: <p>
3: This document guides you through the process of setting up a new LON-CAPA
4: server running Ubuntu 14.04 LTS Server with only the base set of packages installed.
5: The computer will be configured solely as a LON-CAPA server and will be
6: expected to have no other services running. Your server is expected to have
7: a reasonably fast connection to the internet.
8: </p><p>
9: More information is available at
10: <a href="http://install.lon-capa.org/">http://install.lon-capa.org/</a>.
11: </p>
12:
13: <h2>Before you begin</h2>
14: <p>
15: Installing Linux is getting easier and easier.
16: You will be required to log in to the machine and execute
17: some routine Unix commands. Familiarity with the Apache web server, mod_perl,
18: perl, and MySQL are not required to install and run LON-CAPA.
19: </p>
20:
21: <h2>Installation Overview</h2>
22: <p>
23: The installation process takes the following steps:
24: </p>
25: <ol>
26: <li><a href="#obt">Obtain Ubuntu 14.04 LTS .iso</a></li>
27: <li><a href="#net">Determine Network Settings</a></li>
28: <li><a href="#lin">Install Ubuntu 14.04 LTS</a></li>
29: <li><a href="#upd">Update your system</a></li>
30: <li><a href="#ilc">Install LON-CAPA</a></li>
31: <li><a href="#cdc">Create a Domain Coordinator</a></li>
32: <li><a href="#sts">Start/Restart services</a></li>
33: <li><a href="#log">Log in to LON-CAPA</a></li>
34: </ol>
35:
36: <hr>
37: <h2>1. <a name="obt">Obtain Ubuntu 14.04 LTS .iso file</a></h2>
38: <p>
39: Ubuntu 14.04 LTS (server install) isos can be obtained from the <a href="http://www.ubuntu.com/download/server/download">Ubuntu Server download</a> page<br>
40: An .iso file (either 32 bit or 64 bit) can be burned to a CD.
41: </p>
42:
43: <h2>2. <a name="net">Determine Network Settings</a></h2>
44: <p>
45: You will need to know the following network settings for your installation.
46: <b>Note:</b>You must have a static IP address to use LON-CAPA.
47: DHCP is <em>not</em> supported.
48:
49: <ul>
50: <li>ip address </li>
51: <li>netmask </li>
52: <li>hostname </li>
53: <li>gateway </li>
54: <li>domain name server(s) </li>
55: </ul>
56:
57: <h2>3. <a name="lin">Ubuntu 14.04 LTS installation</a></h2>
58: <p>
1.4 raeburn 59: Installing Ubuntu Linux is straightforward.
1.1 raeburn 60: Documentation is available from
61: <a href="https://help.ubuntu.com/community/Installation">https://help.ubuntu.com/community/Installation/</a>
62: Most of the installation screens are self explanatory.
63: There are a few steps that require comment and are dealt with below.
64: </p>
65: <dl style="list-style:square outside none">
66: <dt>Installation Language</dt>
67: <dd>Use English as your installation language.</dd>
68: <dt>Installation Type</dt>
69: <dd>If this is a fresh install choose "Install Ubuntu Server".</dd>
70: <dt>Partitioning your Drive</dt>
71: <dd>For a fresh install you may want to use the automatic partitioning feature of the installer.
72: If you decide to customize partitioning, the following may be useful to know.
73: LON-CAPA resource files are stored in the /home directory, so the
74: majority of the disk space should be allocated here. If you have 20 GB
75: of space for Ubuntu, /home should receive at least 10 to 12 GB.
76: Since MySQL uses the /var filesystem to store its databases you should
77: have at least 4 gigs of space available on /var. Be sure to
78: include adequate swap space. A minimum is 512 Megs, but you should
79: typically have 1 or 2x as much swap space as you do physical RAM.</dd>
80:
81: <dt>Network Configuration</dt>
82: <dd>LON-CAPA will <b>not</b> work with a machine set up to use a dynamic
83: IP address. When configuring your network card, be sure to unselect
84: the DHCP option and enter in your network information.</dd>
85: <dt>Software Selection</dt>
86: <dd>The base system will be installed. Once that is complete you will have the option to select additional software collections. Leave all unselected.</dd>
87: </dl>
88: <p>
89: Finish installing your server, reboot it, and log in with the username you created during installation.
90: </p>
91: <h3>Firewall Configuration</h3>
92: <p>
93: Use ufw to allow incoming traffic for the following services:
94: ssh, www, https
95: </p>
96: <pre>
1.5 raeburn 97: sudo apt-get install ufw
1.1 raeburn 98: sudo ufw default deny
99: sudo ufw enable
100: sudo ufw allow ssh
101: sudo ufw allow www
102: sudo ufw allow https
103: </pre>
104: <h3>E-mail: Postfix Installation</h3>
105: <p>
106: Configure to "Internet Site" to allow LON-CAPA to send e-mail to users.
107: </p>
108: <pre>
109: sudo apt-get install postfix
110: </pre>
111: <h3>E-mail: Postfix Configuration</h3>
112: <p>
113: If you need to change the postfix configuration in the future use:
114: </p>
115: <pre>
116: sudo dpkg-reconfigure postfix
117: </pre>
118:
119: <h2>4. <a name="upd">Update your system</a></h2>
120: <p>
121: Update your system to the latest versions of the system software using apt-get
122: </p>
123: <pre>
124: sudo apt-get update
125: sudo apt-get upgrade
126: </pre>
127: <p>
128: If kernel packages were updated, reboot your system before continuing with the installation.
129: </p>
130: <h2>5. <a name="ilc">Installing LON-CAPA</a></h2>
131: <h3>Import the LON-CAPA encryption key</h3>
132: <pre>
133: wget http://install.loncapa.org/versions/ubuntu/APT-GPG-KEY-loncapa.asc
134: sudo apt-key add APT-GPG-KEY-loncapa.asc
135: sudo apt-get update
136: </pre>
1.4 raeburn 137: <h3>Add LON-CAPA ubuntu repository to /etc/apt/sources.list</h3>
138: <p> Execute: </p>
139: <pre>
140: sudo apt-get install python-software-properties
1.6 ! raeburn 141: sudo add-apt-repository 'deb http://install.loncapa.org/ubuntu trusty main'
1.4 raeburn 142: </pre>
143: <p>
144: You can display which repositories are currently enabled by using:
145: </p>
146: <pre>
1.6 ! raeburn 147: grep '^deb ' /etc/apt/sources.list |grep ' trusty '
! 148: </pre>
! 149: <p>The output should contain:</p>
! 150: <pre>
! 151: deb http://us.archive.ubuntu.com/ubuntu trusty main
! 152: deb http://us.archive.ubuntu.com/ubuntu trusty universe
! 153: deb http://install.loncapa.org/ubuntu trusty main
! 154: </pre>
! 155: <p>If the Ubuntu universe repository is absent it can be added using:</p>
! 156: <pre>
! 157: sudo add-apt-repository universe
! 158: </pre>
! 159: <p>If other Ubuntu repositories, e.g., restricted and multiverse are enabled,
! 160: you can disable them, as they are not needed for LON-CAPA, by using:</p>
! 161: <pre>
! 162: sudo add-apt-repository --remove restricted
! 163: sudo add-apt-repository --remove multiverse
1.4 raeburn 164: </pre>
1.1 raeburn 165: <h3>Install prerequisites</h3>
166: <p> Execute: </p>
167: <pre>
168: sudo apt-get install loncapa-prerequisites
169: </pre><p>
170: This may take some minutes due to LON-CAPA's large number of dependencies.
171: </p>
1.5 raeburn 172: <h3>Secure MySQL</h3>
173: <p> Execute: </p>
174: <pre>
175: sudo mysql_secure_installation
176: </pre><p>
177: Answer “Y” (yes) to the prompts to:
178: (a) remove anonymous users,
179: (b) restrict root user access to the local machine,
180: and (c) remove the test database.</p>
1.3 raeburn 181: <h3>Set MPM mode for Apache web server and enable use of cgi scripts and webDAV</h3>
1.1 raeburn 182: <p>Execute: </p>
183: <pre>
184: sudo a2dismod mpm_event
185: sudo a2enmod mpm_prefork
1.2 raeburn 186: sudo a2enmod cgi
1.3 raeburn 187: sudo a2enmod dav
188: sudo a2enmod dav_fs
1.1 raeburn 189: </pre>
190: <h3>Retrieve and execute LON-CAPA setup program</h3>
191: <p>
192: Retrieve the LON-CAPA setup script and dependencies with the following command:
193: </p>
194: <pre>
195: wget http://install.loncapa.org/linux/install.tar
196: </pre>
197: <p>
198: Extract the archive with the following command:
199: </p>
200: <pre>
201: tar xf install.tar
202: </pre>
203: <p>
204: This creates a directory named <tt>installation</tt>. Change to it and
205: execute the setup script with the following commands:
206: </p>
207: <pre>
208: cd installation
209: sudo ./install.pl
210: </pre>
211: <p>
212: The script is used to prepare a Linux system to run LON-CAPA, and can also be
213: used to check the configuration of a system on which LON-CAPA has already been installed. Typically, though, you will run this script only once, when you first install LON-CAPA.
214: </p>
215: <p>
216: The script will analyze your system to determine which actions are recommended. The script will then prompt you to choose the actions you would like taken.
217: Once a choice has been entered for all nine possible actions, required changes will be made.
218: </p>
219: <p>The possible actions are:
220: <ul>
221: <li>Create the www user/group</li>
222: <li>Install the package LON-CAPA uses to authenticate users.</li>
223: <li>Set-up the MySQL database</li>
224: <li>Set-up MySQL permissions</li>
225: <li>Configure Apache web server</li>
226: <li>Configure start-up of services</li>
227: <li>Check firewall settings</li>
228: <li>Stop services not used by LON-CAPA,<br>
229: e.g., services for a print server: cups daemon</li>
230: <li>Download LON-CAPA source code in readiness for installation</li>
231: </ul>
232: </p>
233:
234: <h3>Determine LON-CAPA Settings</h3>
235: <p>
236: LON-CAPA requires a number of identifying parameters to be set in order
237: for it to function at all. Below is a list with descriptions.
238: </p>
239: <dl>
240: <dt>Host Type (library or access)</dt>
241: <dd>The server must be designated a 'library' or an 'access' server. In
242: general you should have a library server for your instructors to create
243: their course content on and run their courses. Students should connect
244: to access servers. If you are doing the first install of LON-CAPA at
245: your site, or if you are playing with it for your own edification you
246: should make your machine a 'library' server.</dd>
247: <dt>LON-CAPA domain</dt>
248: <dd>Each site or school which installs LON-CAPA needs its own domain.
249: Here at MSU we use 'msu'. You should choose something short but
250: meaningful. <i>Restriction: One word, no hyphens, underscores, or
251: special characters.</i><br>Domain names which include a departmental
252: abbreviation are not recommended as although LON-CAPA may start in
253: a single department, other departments frequently join subsequently.
254: For a domain name: 'msu' is a superior choice to 'msuphys' for example.
255: </dd>
256: <dt>LON-CAPA host id</dt>
257: <dd>Each LON-CAPA server requires a unique internal name. We use names
258: such as "msul1" for the first library server. <i>Restriction: One word,
259: no hyphens, underscores, or special characters.</i>
260: </dd>
261: <dt>Domain's Primary Library Server ID</dt>
262: <dd>If you are setting up a domain with a single library server, then the domain's primary library server ID will be the LON-CAPA host id of that server (e.g., msul1). Once your domain grows and you need to add more servers, one of the library servers in the domain should be assigned as the domain's primary library server. This will be where domain-wide settings will be stored.<dd>
263: <dt>Host administrator email</dt>
264: <dd>The amount of email sent to this address is relatively minimal. Messages
265: are sent every time the system starts up, or if the system is in
266: serious trouble. On a laptop, make this <tt>root@localhost</tt>.
267: </dd>
268: <dt>Support email address</dt>
269: <dd>If you enter an e-mail address here, then users of the system
270: will be able to click an "Ask Helpdesk" link in the system to
271: display a web form which they will complete to request support from
272: your institution's helpdesk. On form submission the contents
273: will be sent to the e-mail address you specify.
274: </dd>
275: </dl>
276:
277: <h3>Configuring LON-CAPA</h3>
278: <p>
1.5 raeburn 279: To configure and install LON-CAPA execute the following commands:
1.1 raeburn 280: </p>
281: <pre>
1.5 raeburn 282: cd ../loncapa-X.Y.Z (X.Y.Z should correspond to a version number like '2.11.0')
283: sudo ./UPDATE
1.1 raeburn 284: </pre>
285: <p>
286: You will need to enter the LON-CAPA configuration information you determined
287: in the previous section.
288: </p>
289:
290: <h2>6. <a name="cdc">Creating a Domain Coordinator</a></h2>
291: <p>
292: You will need at least one user at your site who has the role of
293: 'domain coordinator'. This user creates accounts for other users and
294: grants them additional privileges. The make_domain_coordinator.pl script
295: invoked below requires that you enter the user's password.
296: Replace USERNAME and DOMAIN with an appropriate username and your domain.
297: </p>
298: <pre>
1.5 raeburn 299: cd loncom/build
300: sudo perl make_domain_coordinator.pl USERNAME DOMAIN
301: cd
1.1 raeburn 302: </pre>
303:
304: <h2>7. <a name="sts">Start/Restart Services</a></h2>
305: <p>
306: The LON-CAPA network services take a moment to start. Most misconfigurations
1.5 raeburn 307: will be apparent at this step.
1.1 raeburn 308: </p>
309: <pre>
1.5 raeburn 310: sudo /etc/init.d/loncontrol start
311: sudo service apache2 restart
1.1 raeburn 312: exit
313: </pre>
314: <p>
315: If you receive warnings about missing perl modules when starting Apache,
316: please make sure you followed the instructions in
317: <b>Installing prerequisites</b>. If you still have errors, please
318: contact the MSU LON-CAPA group.
319: </p>
320:
321: <h2>8. <a name="log">Log in to your LON-CAPA Machine</a></h2>
322: <p>
323: Point a web browser at your new machine and log in as the domain
324: coordinator. Congratulations!
325: </p>
326:
327: <hr>
328: <h2>If things aren't working right</h2>
329: <p>
330: If you've followed the steps above and the server doesn't start or you think
331: there's something wrong, please send a <a href="http://help.loncapa.org/help">help request</a> to the MSU LON-CAPA group. If there were errors in installation of the dependency .deb packages or errors during the
332: automatic setup, please send us as much information as possible.
333: If some part of this document is unclear please let us know.
334: </p>
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to ubuntu14LTS_install.frag CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [LON-CAPA] / doc / build